diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/qcom_usb_vbus-regulator.c | 97 |
3 files changed, 108 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c398e90e0e73..a63e02b7034d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -836,6 +836,16 @@ config REGULATOR_QCOM_SPMI Qualcomm SPMI PMICs as a module. The module will be named "qcom_spmi-regulator". +config REGULATOR_QCOM_USB_VBUS + tristate "Qualcomm USB Vbus regulator driver" + depends on SPMI || COMPILE_TEST + help + If you say yes to this option, support will be included for the + regulator used to enable the VBUS output. + + Say M here if you want to include support for enabling the VBUS output + as a module. The module will be named "qcom_usb_vbus_regulator". + config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" depends on MFD_RC5T583 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 46592c160d22..9f8b6c7494dd 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -93,6 +93,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o +obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o diff --git a/drivers/regulator/qcom_usb_vbus-regulator.c b/drivers/regulator/qcom_usb_vbus-regulator.c new file mode 100644 index 000000000000..342d92373598 --- /dev/null +++ b/drivers/regulator/qcom_usb_vbus-regulator.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Qualcomm PMIC VBUS output regulator driver +// +// Copyright (c) 2020, The Linux Foundation. All rights reserved. + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regmap.h> + +#define CMD_OTG 0x40 +#define OTG_EN BIT(0) +#define OTG_CFG 0x53 +#define OTG_EN_SRC_CFG BIT(1) + +static const struct regulator_ops qcom_usb_vbus_reg_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_desc qcom_usb_vbus_rdesc = { + .name = "usb_vbus", + .ops = &qcom_usb_vbus_reg_ops, + .owner = THIS_MODULE, + .type = REGULATOR_VOLTAGE, +}; + +static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regulator_dev *rdev; + struct regmap *regmap; + struct regulator_config config = { }; + struct regulator_init_data *init_data; + int ret; + u32 base; + + ret = of_property_read_u32(dev->of_node, "reg", &base); + if (ret < 0) { + dev_err(dev, "no base address found\n"); + return ret; + } + + regmap = dev_get_regmap(dev->parent, NULL); + if (regmap) { + dev_err(dev, "Failed to get regmap\n"); + return -ENOENT; + } + + init_data = of_get_regulator_init_data(dev, dev->of_node, + &qcom_usb_vbus_rdesc); + if (!init_data) + return -ENOMEM; + + qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG; + qcom_usb_vbus_rdesc.enable_mask = OTG_EN; + config.dev = dev; + config.init_data = init_data; + config.regmap = regmap; + + rdev = devm_regulator_register(dev, &qcom_usb_vbus_rdesc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "not able to register vbus reg %d\n", ret); + return ret; + } + + /* Disable HW logic for VBUS enable */ + regmap_update_bits(regmap, base + OTG_CFG, OTG_EN_SRC_CFG, 0); + + return 0; +} + +static const struct of_device_id qcom_usb_vbus_regulator_match[] = { + { .compatible = "qcom,pm8150b-vbus-reg" }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match); + +static struct platform_driver qcom_usb_vbus_regulator_driver = { + .driver = { + .name = "qcom-usb-vbus-regulator", + .of_match_table = qcom_usb_vbus_regulator_match, + }, + .probe = qcom_usb_vbus_regulator_probe, +}; +module_platform_driver(qcom_usb_vbus_regulator_driver); + +MODULE_DESCRIPTION("Qualcomm USB vbus regulator driver"); +MODULE_LICENSE("GPL v2"); |