summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/amba-pl011.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/amba-pl011.c')
-rw-r--r--drivers/tty/serial/amba-pl011.c651
1 files changed, 419 insertions, 232 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 763eb20fe321..50cf5b10ceed 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -58,7 +58,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/sizes.h>
#include <linux/io.h>
-#include <linux/workqueue.h>
+#include <linux/acpi.h>
#define UART_NR 14
@@ -79,6 +79,8 @@ struct vendor_data {
bool oversampling;
bool dma_threshold;
bool cts_event_workaround;
+ bool always_enabled;
+ bool fixed_options;
unsigned int (*get_fifosize)(struct amba_device *dev);
};
@@ -95,9 +97,19 @@ static struct vendor_data vendor_arm = {
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
+ .always_enabled = false,
+ .fixed_options = false,
.get_fifosize = get_fifosize_arm,
};
+static struct vendor_data vendor_sbsa = {
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .always_enabled = true,
+ .fixed_options = true,
+};
+
static unsigned int get_fifosize_st(struct amba_device *dev)
{
return 64;
@@ -110,6 +122,8 @@ static struct vendor_data vendor_st = {
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
+ .always_enabled = false,
+ .fixed_options = false,
.get_fifosize = get_fifosize_st,
};
@@ -157,9 +171,8 @@ struct uart_amba_port {
unsigned int lcrh_tx; /* vendor-specific */
unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
- struct delayed_work tx_softirq_work;
bool autorts;
- unsigned int tx_irq_seen; /* 0=none, 1=1, 2=2 or more */
+ unsigned int fixed_baud; /* vendor-set fixed baud rate */
char type[12];
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
@@ -1172,15 +1185,14 @@ static void pl011_stop_tx(struct uart_port *port)
pl011_dma_tx_stop(uap);
}
-static bool pl011_tx_chars(struct uart_amba_port *uap);
+static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
/* Start TX with programmed I/O only (no DMA) */
static void pl011_start_tx_pio(struct uart_amba_port *uap)
{
uap->im |= UART011_TXIM;
writew(uap->im, uap->port.membase + UART011_IMSC);
- if (!uap->tx_irq_seen)
- pl011_tx_chars(uap);
+ pl011_tx_chars(uap, false);
}
static void pl011_start_tx(struct uart_port *port)
@@ -1247,15 +1259,11 @@ __acquires(&uap->port.lock)
spin_lock(&uap->port.lock);
}
-/*
- * Transmit a character
- *
- * Returns true if the character was successfully queued to the FIFO.
- * Returns false otherwise.
- */
-static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c)
+static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
+ bool from_irq)
{
- if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ if (unlikely(!from_irq) &&
+ readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
return false; /* unable to transmit character */
writew(c, uap->port.membase + UART01x_DR);
@@ -1264,70 +1272,41 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c)
return true;
}
-static bool pl011_tx_chars(struct uart_amba_port *uap)
+static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
{
struct circ_buf *xmit = &uap->port.state->xmit;
- int count;
-
- if (unlikely(uap->tx_irq_seen < 2))
- /*
- * Initial FIFO fill level unknown: we must check TXFF
- * after each write, so just try to fill up the FIFO.
- */
- count = uap->fifosize;
- else /* tx_irq_seen >= 2 */
- /*
- * FIFO initially at least half-empty, so we can simply
- * write half the FIFO without polling TXFF.
-
- * Note: the *first* TX IRQ can still race with
- * pl011_start_tx_pio(), which can result in the FIFO
- * being fuller than expected in that case.
- */
- count = uap->fifosize >> 1;
-
- /*
- * If the FIFO is full we're guaranteed a TX IRQ at some later point,
- * and can't transmit immediately in any case:
- */
- if (unlikely(uap->tx_irq_seen < 2 &&
- readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF))
- return false;
+ int count = uap->fifosize >> 1;
if (uap->port.x_char) {
- if (!pl011_tx_char(uap, uap->port.x_char))
- goto done;
+ if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
+ return;
uap->port.x_char = 0;
--count;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
pl011_stop_tx(&uap->port);
- goto done;
+ return;
}
/* If we are using DMA mode, try to send some characters. */
if (pl011_dma_tx_irq(uap))
- goto done;
+ return;
- while (count-- > 0 && pl011_tx_char(uap, xmit->buf[xmit->tail])) {
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- if (uart_circ_empty(xmit))
+ do {
+ if (likely(from_irq) && count-- == 0)
break;
- }
+
+ if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq))
+ break;
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ } while (!uart_circ_empty(xmit));
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
- if (uart_circ_empty(xmit)) {
+ if (uart_circ_empty(xmit))
pl011_stop_tx(&uap->port);
- goto done;
- }
-
- if (unlikely(!uap->tx_irq_seen))
- schedule_delayed_work(&uap->tx_softirq_work, uap->port.timeout);
-
-done:
- return false;
}
static void pl011_modem_status(struct uart_amba_port *uap)
@@ -1354,26 +1333,23 @@ static void pl011_modem_status(struct uart_amba_port *uap)
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
-static void pl011_tx_softirq(struct work_struct *work)
+static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
{
- struct delayed_work *dwork = to_delayed_work(work);
- struct uart_amba_port *uap =
- container_of(dwork, struct uart_amba_port, tx_softirq_work);
-
- spin_lock(&uap->port.lock);
- while (pl011_tx_chars(uap)) ;
- spin_unlock(&uap->port.lock);
-}
+ unsigned int dummy_read;
-static void pl011_tx_irq_seen(struct uart_amba_port *uap)
-{
- if (likely(uap->tx_irq_seen > 1))
+ if (!uap->vendor->cts_event_workaround)
return;
- uap->tx_irq_seen++;
- if (uap->tx_irq_seen < 2)
- /* first TX IRQ */
- cancel_delayed_work(&uap->tx_softirq_work);
+ /* workaround to make sure that all bits are unlocked.. */
+ writew(0x00, uap->port.membase + UART011_ICR);
+
+ /*
+ * WA: introduce 26ns(1 uart clk) delay before W1C;
+ * single apb access will incur 2 pclk(133.12Mhz) delay,
+ * so add 2 dummy reads
+ */
+ dummy_read = readw(uap->port.membase + UART011_ICR);
+ dummy_read = readw(uap->port.membase + UART011_ICR);
}
static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -1381,25 +1357,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
struct uart_amba_port *uap = dev_id;
unsigned long flags;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+ u16 imsc;
int handled = 0;
- unsigned int dummy_read;
spin_lock_irqsave(&uap->port.lock, flags);
- status = readw(uap->port.membase + UART011_MIS);
+ imsc = readw(uap->port.membase + UART011_IMSC);
+ status = readw(uap->port.membase + UART011_RIS) & imsc;
if (status) {
do {
- if (uap->vendor->cts_event_workaround) {
- /* workaround to make sure that all bits are unlocked.. */
- writew(0x00, uap->port.membase + UART011_ICR);
-
- /*
- * WA: introduce 26ns(1 uart clk) delay before W1C;
- * single apb access will incur 2 pclk(133.12Mhz) delay,
- * so add 2 dummy reads
- */
- dummy_read = readw(uap->port.membase + UART011_ICR);
- dummy_read = readw(uap->port.membase + UART011_ICR);
- }
+ check_apply_cts_event_workaround(uap);
writew(status & ~(UART011_TXIS|UART011_RTIS|
UART011_RXIS),
@@ -1414,15 +1380,13 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (status & (UART011_DSRMIS|UART011_DCDMIS|
UART011_CTSMIS|UART011_RIMIS))
pl011_modem_status(uap);
- if (status & UART011_TXIS) {
- pl011_tx_irq_seen(uap);
- pl011_tx_chars(uap);
- }
+ if (status & UART011_TXIS)
+ pl011_tx_chars(uap, true);
if (pass_counter-- == 0)
break;
- status = readw(uap->port.membase + UART011_MIS);
+ status = readw(uap->port.membase + UART011_RIS) & imsc;
} while (status != 0);
handled = 1;
}
@@ -1617,6 +1581,32 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
}
}
+static int pl011_allocate_irq(struct uart_amba_port *uap)
+{
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+
+ return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+}
+
+/*
+ * Enable interrupts, only timeouts when using DMA
+ * if initial RX DMA job failed, start in interrupt mode
+ * as well.
+ */
+static void pl011_enable_interrupts(struct uart_amba_port *uap)
+{
+ spin_lock_irq(&uap->port.lock);
+
+ /* Clear out any spuriously appearing RX interrupts */
+ writew(UART011_RTIS | UART011_RXIS,
+ uap->port.membase + UART011_ICR);
+ uap->im = UART011_RTIM;
+ if (!pl011_dma_rx_running(uap))
+ uap->im |= UART011_RXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ spin_unlock_irq(&uap->port.lock);
+}
+
static int pl011_startup(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -1628,20 +1618,12 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
- writew(uap->im, uap->port.membase + UART011_IMSC);
-
- /*
- * Allocate the IRQ
- */
- retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+ retval = pl011_allocate_irq(uap);
if (retval)
goto clk_dis;
writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
- /* Assume that TX IRQ doesn't work until we see one: */
- uap->tx_irq_seen = 0;
-
spin_lock_irq(&uap->port.lock);
/* restore RTS and DTR */
@@ -1659,20 +1641,7 @@ static int pl011_startup(struct uart_port *port)
/* Startup DMA */
pl011_dma_startup(uap);
- /*
- * Finally, enable interrupts, only timeouts when using DMA
- * if initial RX DMA job failed, start in interrupt mode
- * as well.
- */
- spin_lock_irq(&uap->port.lock);
- /* Clear out any spuriously appearing RX interrupts */
- writew(UART011_RTIS | UART011_RXIS,
- uap->port.membase + UART011_ICR);
- uap->im = UART011_RTIM;
- if (!pl011_dma_rx_running(uap))
- uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
- spin_unlock_irq(&uap->port.lock);
+ pl011_enable_interrupts(uap);
return 0;
@@ -1681,6 +1650,28 @@ static int pl011_startup(struct uart_port *port)
return retval;
}
+static int sbsa_uart_startup(struct uart_port *port)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+ int retval;
+
+ retval = pl011_hwinit(port);
+ if (retval)
+ return retval;
+
+ retval = pl011_allocate_irq(uap);
+ if (retval)
+ return retval;
+
+ /* The SBSA UART does not support any modem status lines. */
+ uap->old_status = 0;
+
+ pl011_enable_interrupts(uap);
+
+ return 0;
+}
+
static void pl011_shutdown_channel(struct uart_amba_port *uap,
unsigned int lcrh)
{
@@ -1691,36 +1682,15 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
writew(val, uap->port.membase + lcrh);
}
-static void pl011_shutdown(struct uart_port *port)
+/*
+ * disable the port. It should not disable RTS and DTR.
+ * Also RTS and DTR state should be preserved to restore
+ * it during startup().
+ */
+static void pl011_disable_uart(struct uart_amba_port *uap)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
unsigned int cr;
- cancel_delayed_work_sync(&uap->tx_softirq_work);
-
- /*
- * disable all interrupts
- */
- spin_lock_irq(&uap->port.lock);
- uap->im = 0;
- writew(uap->im, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
- spin_unlock_irq(&uap->port.lock);
-
- pl011_dma_shutdown(uap);
-
- /*
- * Free the interrupt
- */
- free_irq(uap->port.irq, uap);
-
- /*
- * disable the port
- * disable the port. It should not disable RTS and DTR.
- * Also RTS and DTR state should be preserved to restore
- * it during startup().
- */
uap->autorts = false;
spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + UART011_CR);
@@ -1736,6 +1706,32 @@ static void pl011_shutdown(struct uart_port *port)
pl011_shutdown_channel(uap, uap->lcrh_rx);
if (uap->lcrh_rx != uap->lcrh_tx)
pl011_shutdown_channel(uap, uap->lcrh_tx);
+}
+
+static void pl011_disable_interrupts(struct uart_amba_port *uap)
+{
+ spin_lock_irq(&uap->port.lock);
+
+ /* mask all interrupts and clear all pending ones */
+ uap->im = 0;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
+ spin_unlock_irq(&uap->port.lock);
+}
+
+static void pl011_shutdown(struct uart_port *port)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+
+ pl011_disable_interrupts(uap);
+
+ pl011_dma_shutdown(uap);
+
+ free_irq(uap->port.irq, uap);
+
+ pl011_disable_uart(uap);
/*
* Shut down the clock producer
@@ -1756,6 +1752,51 @@ static void pl011_shutdown(struct uart_port *port)
uap->port.ops->flush_buffer(port);
}
+static void sbsa_uart_shutdown(struct uart_port *port)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+
+ pl011_disable_interrupts(uap);
+
+ free_irq(uap->port.irq, uap);
+
+ if (uap->port.ops->flush_buffer)
+ uap->port.ops->flush_buffer(port);
+}
+
+static void
+pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios)
+{
+ port->read_status_mask = UART011_DR_OE | 255;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= UART011_DR_BE;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART011_DR_BE;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART011_DR_OE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_DR_RX;
+}
+
static void
pl011_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
@@ -1820,33 +1861,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
*/
uart_update_timeout(port, termios->c_cflag, baud);
- port->read_status_mask = UART011_DR_OE | 255;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
- if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- port->read_status_mask |= UART011_DR_BE;
-
- /*
- * Characters to ignore
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= UART011_DR_BE;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART011_DR_OE;
- }
-
- /*
- * Ignore all characters if CREAD is not set.
- */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_DUMMY_DR_RX;
+ pl011_setup_status_masks(port, termios);
if (UART_ENABLE_MS(port, termios->c_cflag))
pl011_enable_ms(port);
@@ -1901,6 +1916,27 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&port->lock, flags);
}
+static void
+sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+ unsigned long flags;
+
+ tty_termios_encode_baud_rate(termios, uap->fixed_baud, uap->fixed_baud);
+
+ /* The SBSA UART only supports 8n1 without hardware flow control. */
+ termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
+ termios->c_cflag &= ~(CMSPAR | CRTSCTS);
+ termios->c_cflag |= CS8 | CLOCAL;
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_update_timeout(port, CS8, uap->fixed_baud);
+ pl011_setup_status_masks(port, termios);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
static const char *pl011_type(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -1976,6 +2012,37 @@ static struct uart_ops amba_pl011_pops = {
#endif
};
+static void sbsa_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int sbsa_uart_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+static const struct uart_ops sbsa_uart_pops = {
+ .tx_empty = pl011_tx_empty,
+ .set_mctrl = sbsa_uart_set_mctrl,
+ .get_mctrl = sbsa_uart_get_mctrl,
+ .stop_tx = pl011_stop_tx,
+ .start_tx = pl011_start_tx,
+ .stop_rx = pl011_stop_rx,
+ .startup = sbsa_uart_startup,
+ .shutdown = sbsa_uart_shutdown,
+ .set_termios = sbsa_uart_set_termios,
+ .type = pl011_type,
+ .release_port = pl011_release_port,
+ .request_port = pl011_request_port,
+ .config_port = pl011_config_port,
+ .verify_port = pl011_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = pl011_hwinit,
+ .poll_get_char = pl011_get_poll_char,
+ .poll_put_char = pl011_put_poll_char,
+#endif
+};
+
static struct uart_amba_port *amba_ports[UART_NR];
#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
@@ -1994,7 +2061,7 @@ static void
pl011_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_amba_port *uap = amba_ports[co->index];
- unsigned int status, old_cr, new_cr;
+ unsigned int status, old_cr = 0, new_cr;
unsigned long flags;
int locked = 1;
@@ -2011,10 +2078,12 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
/*
* First save the CR then disable the interrupts
*/
- old_cr = readw(uap->port.membase + UART011_CR);
- new_cr = old_cr & ~UART011_CR_CTSEN;
- new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- writew(new_cr, uap->port.membase + UART011_CR);
+ if (!uap->vendor->always_enabled) {
+ old_cr = readw(uap->port.membase + UART011_CR);
+ new_cr = old_cr & ~UART011_CR_CTSEN;
+ new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+ writew(new_cr, uap->port.membase + UART011_CR);
+ }
uart_console_write(&uap->port, s, count, pl011_console_putchar);
@@ -2025,7 +2094,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
do {
status = readw(uap->port.membase + UART01x_FR);
} while (status & UART01x_FR_BUSY);
- writew(old_cr, uap->port.membase + UART011_CR);
+ if (!uap->vendor->always_enabled)
+ writew(old_cr, uap->port.membase + UART011_CR);
if (locked)
spin_unlock(&uap->port.lock);
@@ -2106,10 +2176,15 @@ static int __init pl011_console_setup(struct console *co, char *options)
uap->port.uartclk = clk_get_rate(uap->clk);
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- pl011_console_get_options(uap, &baud, &parity, &bits);
+ if (uap->vendor->fixed_options) {
+ baud = uap->fixed_baud;
+ } else {
+ if (options)
+ uart_parse_options(options,
+ &baud, &parity, &bits, &flow);
+ else
+ pl011_console_get_options(uap, &baud, &parity, &bits);
+ }
return uart_set_options(&uap->port, co, baud, parity, bits, flow);
}
@@ -2201,97 +2276,126 @@ static int pl011_probe_dt_alias(int index, struct device *dev)
return ret;
}
-static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+/* unregisters the driver also if no more ports are left */
+static void pl011_unregister_port(struct uart_amba_port *uap)
{
- struct uart_amba_port *uap;
- struct vendor_data *vendor = id->data;
- void __iomem *base;
- int i, ret;
+ int i;
+ bool busy = false;
+
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
+ else if (amba_ports[i])
+ busy = true;
+ }
+ pl011_dma_remove(uap);
+ if (!busy)
+ uart_unregister_driver(&amba_reg);
+}
+
+static int pl011_find_free_port(void)
+{
+ int i;
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
if (amba_ports[i] == NULL)
- break;
-
- if (i == ARRAY_SIZE(amba_ports))
- return -EBUSY;
+ return i;
- uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
- GFP_KERNEL);
- if (uap == NULL)
- return -ENOMEM;
+ return -EBUSY;
+}
- i = pl011_probe_dt_alias(i, &dev->dev);
+static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
+ struct resource *mmiobase, int index)
+{
+ void __iomem *base;
- base = devm_ioremap(&dev->dev, dev->res.start,
- resource_size(&dev->res));
+ base = devm_ioremap_resource(dev, mmiobase);
if (!base)
return -ENOMEM;
- uap->clk = devm_clk_get(&dev->dev, NULL);
- if (IS_ERR(uap->clk))
- return PTR_ERR(uap->clk);
+ index = pl011_probe_dt_alias(index, dev);
- uap->vendor = vendor;
- uap->lcrh_rx = vendor->lcrh_rx;
- uap->lcrh_tx = vendor->lcrh_tx;
uap->old_cr = 0;
- uap->fifosize = vendor->get_fifosize(dev);
- uap->port.dev = &dev->dev;
- uap->port.mapbase = dev->res.start;
+ uap->port.dev = dev;
+ uap->port.mapbase = mmiobase->start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
- uap->port.irq = dev->irq[0];
uap->port.fifosize = uap->fifosize;
- uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
- uap->port.line = i;
- INIT_DELAYED_WORK(&uap->tx_softirq_work, pl011_tx_softirq);
+ uap->port.line = index;
- /* Ensure interrupts from this UART are masked and cleared */
- writew(0, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
+ amba_ports[index] = uap;
- snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+ return 0;
+}
- amba_ports[i] = uap;
+static int pl011_register_port(struct uart_amba_port *uap)
+{
+ int ret;
- amba_set_drvdata(dev, uap);
+ /* Ensure interrupts from this UART are masked and cleared */
+ writew(0, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
if (!amba_reg.state) {
ret = uart_register_driver(&amba_reg);
if (ret < 0) {
- dev_err(&dev->dev,
+ dev_err(uap->port.dev,
"Failed to register AMBA-PL011 driver\n");
return ret;
}
}
ret = uart_add_one_port(&amba_reg, &uap->port);
- if (ret) {
- amba_ports[i] = NULL;
- uart_unregister_driver(&amba_reg);
- }
+ if (ret)
+ pl011_unregister_port(uap);
return ret;
}
+static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+{
+ struct uart_amba_port *uap;
+ struct vendor_data *vendor = id->data;
+ int portnr, ret;
+
+ portnr = pl011_find_free_port();
+ if (portnr < 0)
+ return portnr;
+
+ uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (!uap)
+ return -ENOMEM;
+
+ uap->clk = devm_clk_get(&dev->dev, NULL);
+ if (IS_ERR(uap->clk))
+ return PTR_ERR(uap->clk);
+
+ uap->vendor = vendor;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->fifosize = vendor->get_fifosize(dev);
+ uap->port.irq = dev->irq[0];
+ uap->port.ops = &amba_pl011_pops;
+
+ snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+
+ ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
+ if (ret)
+ return ret;
+
+ amba_set_drvdata(dev, uap);
+
+ return pl011_register_port(uap);
+}
+
static int pl011_remove(struct amba_device *dev)
{
struct uart_amba_port *uap = amba_get_drvdata(dev);
- bool busy = false;
- int i;
uart_remove_one_port(&amba_reg, &uap->port);
-
- for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
- if (amba_ports[i] == uap)
- amba_ports[i] = NULL;
- else if (amba_ports[i])
- busy = true;
-
- pl011_dma_remove(uap);
- if (!busy)
- uart_unregister_driver(&amba_reg);
+ pl011_unregister_port(uap);
return 0;
}
@@ -2319,6 +2423,86 @@ static int pl011_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+static int sbsa_uart_probe(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap;
+ struct resource *r;
+ int portnr, ret;
+ int baudrate;
+
+ /*
+ * Check the mandatory baud rate parameter in the DT node early
+ * so that we can easily exit with the error.
+ */
+ if (pdev->dev.of_node) {
+ struct device_node *np = pdev->dev.of_node;
+
+ ret = of_property_read_u32(np, "current-speed", &baudrate);
+ if (ret)
+ return ret;
+ } else {
+ baudrate = 115200;
+ }
+
+ portnr = pl011_find_free_port();
+ if (portnr < 0)
+ return portnr;
+
+ uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (!uap)
+ return -ENOMEM;
+
+ uap->vendor = &vendor_sbsa;
+ uap->fifosize = 32;
+ uap->port.irq = platform_get_irq(pdev, 0);
+ uap->port.ops = &sbsa_uart_pops;
+ uap->fixed_baud = baudrate;
+
+ snprintf(uap->type, sizeof(uap->type), "SBSA");
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ret = pl011_setup_port(&pdev->dev, uap, r, portnr);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, uap);
+
+ return pl011_register_port(uap);
+}
+
+static int sbsa_uart_remove(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&amba_reg, &uap->port);
+ pl011_unregister_port(uap);
+ return 0;
+}
+
+static const struct of_device_id sbsa_uart_of_match[] = {
+ { .compatible = "arm,sbsa-uart", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
+
+static const struct acpi_device_id sbsa_uart_acpi_match[] = {
+ { "ARMH0011", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
+
+static struct platform_driver arm_sbsa_uart_platform_driver = {
+ .probe = sbsa_uart_probe,
+ .remove = sbsa_uart_remove,
+ .driver = {
+ .name = "sbsa-uart",
+ .of_match_table = of_match_ptr(sbsa_uart_of_match),
+ .acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
+ },
+};
+
static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
@@ -2349,11 +2533,14 @@ static int __init pl011_init(void)
{
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+ if (platform_driver_register(&arm_sbsa_uart_platform_driver))
+ pr_warn("could not register SBSA UART platform driver\n");
return amba_driver_register(&pl011_driver);
}
static void __exit pl011_exit(void)
{
+ platform_driver_unregister(&arm_sbsa_uart_platform_driver);
amba_driver_unregister(&pl011_driver);
}