summaryrefslogtreecommitdiff
path: root/drivers/thermal
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal')
-rw-r--r--drivers/thermal/cpu_cooling.c359
-rw-r--r--drivers/thermal/db8500_cpufreq_cooling.c20
-rw-r--r--drivers/thermal/imx_thermal.c15
-rw-r--r--drivers/thermal/int340x_thermal/Makefile1
-rw-r--r--drivers/thermal/int340x_thermal/acpi_thermal_rel.c8
-rw-r--r--drivers/thermal/int340x_thermal/int3400_thermal.c1
-rw-r--r--drivers/thermal/int340x_thermal/int3402_thermal.c1
-rw-r--r--drivers/thermal/int340x_thermal/int3403_thermal.c4
-rw-r--r--drivers/thermal/int340x_thermal/processor_thermal_device.c309
-rw-r--r--drivers/thermal/intel_powerclamp.c1
-rw-r--r--drivers/thermal/rockchip_thermal.c1
-rw-r--r--drivers/thermal/samsung/Kconfig2
-rw-r--r--drivers/thermal/samsung/exynos_thermal_common.c12
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c5
-rw-r--r--drivers/thermal/thermal_core.c6
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-thermal-common.c17
16 files changed, 491 insertions, 271 deletions
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 588185abeab0..f65f0d109fc8 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -4,6 +4,8 @@
* Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
* Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org>
*
+ * Copyright (C) 2014 Viresh Kumar <viresh.kumar@linaro.org>
+ *
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -28,6 +30,20 @@
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
+/*
+ * Cooling state <-> CPUFreq frequency
+ *
+ * Cooling states are translated to frequencies throughout this driver and this
+ * is the relation between them.
+ *
+ * Highest cooling state corresponds to lowest possible frequency.
+ *
+ * i.e.
+ * level 0 --> 1st Max Freq
+ * level 1 --> 2nd Max Freq
+ * ...
+ */
+
/**
* struct cpufreq_cooling_device - data for cooling device with cpufreq
* @id: unique integer value corresponding to each cpufreq_cooling_device
@@ -38,26 +54,27 @@
* cooling devices.
* @cpufreq_val: integer value representing the absolute value of the clipped
* frequency.
+ * @max_level: maximum cooling level. One less than total number of valid
+ * cpufreq frequencies.
* @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
* @node: list_head to link all cpufreq_cooling_device together.
*
- * This structure is required for keeping information of each
- * cpufreq_cooling_device registered. In order to prevent corruption of this a
- * mutex lock cooling_cpufreq_lock is used.
+ * This structure is required for keeping information of each registered
+ * cpufreq_cooling_device.
*/
struct cpufreq_cooling_device {
int id;
struct thermal_cooling_device *cool_dev;
unsigned int cpufreq_state;
unsigned int cpufreq_val;
+ unsigned int max_level;
+ unsigned int *freq_table; /* In descending order */
struct cpumask allowed_cpus;
struct list_head node;
};
static DEFINE_IDR(cpufreq_idr);
static DEFINE_MUTEX(cooling_cpufreq_lock);
-static unsigned int cpufreq_dev_count;
-
static LIST_HEAD(cpufreq_dev_list);
/**
@@ -99,120 +116,30 @@ static void release_idr(struct idr *idr, int id)
/* Below code defines functions to be used for cpufreq as cooling device */
/**
- * is_cpufreq_valid - function to check frequency transitioning capability.
- * @cpu: cpu for which check is needed.
+ * get_level: Find the level for a particular frequency
+ * @cpufreq_dev: cpufreq_dev for which the property is required
+ * @freq: Frequency
*
- * This function will check the current state of the system if
- * it is capable of changing the frequency for a given @cpu.
- *
- * Return: 0 if the system is not currently capable of changing
- * the frequency of given cpu. !0 in case the frequency is changeable.
+ * Return: level on success, THERMAL_CSTATE_INVALID on error.
*/
-static int is_cpufreq_valid(int cpu)
+static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev,
+ unsigned int freq)
{
- struct cpufreq_policy policy;
-
- return !cpufreq_get_policy(&policy, cpu);
-}
-
-enum cpufreq_cooling_property {
- GET_LEVEL,
- GET_FREQ,
- GET_MAXL,
-};
-
-/**
- * get_property - fetch a property of interest for a give cpu.
- * @cpu: cpu for which the property is required
- * @input: query parameter
- * @output: query return
- * @property: type of query (frequency, level, max level)
- *
- * This is the common function to
- * 1. get maximum cpu cooling states
- * 2. translate frequency to cooling state
- * 3. translate cooling state to frequency
- * Note that the code may be not in good shape
- * but it is written in this way in order to:
- * a) reduce duplicate code as most of the code can be shared.
- * b) make sure the logic is consistent when translating between
- * cooling states and frequencies.
- *
- * Return: 0 on success, -EINVAL when invalid parameters are passed.
- */
-static int get_property(unsigned int cpu, unsigned long input,
- unsigned int *output,
- enum cpufreq_cooling_property property)
-{
- int i;
- unsigned long max_level = 0, level = 0;
- unsigned int freq = CPUFREQ_ENTRY_INVALID;
- int descend = -1;
- struct cpufreq_frequency_table *pos, *table =
- cpufreq_frequency_get_table(cpu);
-
- if (!output)
- return -EINVAL;
-
- if (!table)
- return -EINVAL;
-
- cpufreq_for_each_valid_entry(pos, table) {
- /* ignore duplicate entry */
- if (freq == pos->frequency)
- continue;
-
- /* get the frequency order */
- if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
- descend = freq > pos->frequency;
-
- freq = pos->frequency;
- max_level++;
- }
-
- /* No valid cpu frequency entry */
- if (max_level == 0)
- return -EINVAL;
+ unsigned long level;
- /* max_level is an index, not a counter */
- max_level--;
+ for (level = 0; level <= cpufreq_dev->max_level; level++) {
+ if (freq == cpufreq_dev->freq_table[level])
+ return level;
- /* get max level */
- if (property == GET_MAXL) {
- *output = (unsigned int)max_level;
- return 0;
+ if (freq > cpufreq_dev->freq_table[level])
+ break;
}
- if (property == GET_FREQ)
- level = descend ? input : (max_level - input);
-
- i = 0;
- cpufreq_for_each_valid_entry(pos, table) {
- /* ignore duplicate entry */
- if (freq == pos->frequency)
- continue;
-
- /* now we have a valid frequency entry */
- freq = pos->frequency;
-
- if (property == GET_LEVEL && (unsigned int)input == freq) {
- /* get level by frequency */
- *output = descend ? i : (max_level - i);
- return 0;
- }
- if (property == GET_FREQ && level == i) {
- /* get frequency by level */
- *output = freq;
- return 0;
- }
- i++;
- }
-
- return -EINVAL;
+ return THERMAL_CSTATE_INVALID;
}
/**
- * cpufreq_cooling_get_level - for a give cpu, return the cooling level.
+ * cpufreq_cooling_get_level - for a given cpu, return the cooling level.
* @cpu: cpu for which the level is required
* @freq: the frequency of interest
*
@@ -224,77 +151,21 @@ static int get_property(unsigned int cpu, unsigned long input,
*/
unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
{
- unsigned int val;
-
- if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL))
- return THERMAL_CSTATE_INVALID;
-
- return (unsigned long)val;
-}
-EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
-
-/**
- * get_cpu_frequency - get the absolute value of frequency from level.
- * @cpu: cpu for which frequency is fetched.
- * @level: cooling level
- *
- * This function matches cooling level with frequency. Based on a cooling level
- * of frequency, equals cooling state of cpu cooling device, it will return
- * the corresponding frequency.
- * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
- *
- * Return: 0 on error, the corresponding frequency otherwise.
- */
-static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
-{
- int ret = 0;
- unsigned int freq;
-
- ret = get_property(cpu, level, &freq, GET_FREQ);
- if (ret)
- return 0;
-
- return freq;
-}
-
-/**
- * cpufreq_apply_cooling - function to apply frequency clipping.
- * @cpufreq_device: cpufreq_cooling_device pointer containing frequency
- * clipping data.
- * @cooling_state: value of the cooling state.
- *
- * Function used to make sure the cpufreq layer is aware of current thermal
- * limits. The limits are applied by updating the cpufreq policy.
- *
- * Return: 0 on success, an error code otherwise (-EINVAL in case wrong
- * cooling state).
- */
-static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
- unsigned long cooling_state)
-{
- unsigned int cpuid, clip_freq;
- struct cpumask *mask = &cpufreq_device->allowed_cpus;
- unsigned int cpu = cpumask_any(mask);
-
-
- /* Check if the old cooling action is same as new cooling action */
- if (cpufreq_device->cpufreq_state == cooling_state)
- return 0;
-
- clip_freq = get_cpu_frequency(cpu, cooling_state);
- if (!clip_freq)
- return -EINVAL;
-
- cpufreq_device->cpufreq_state = cooling_state;
- cpufreq_device->cpufreq_val = clip_freq;
+ struct cpufreq_cooling_device *cpufreq_dev;
- for_each_cpu(cpuid, mask) {
- if (is_cpufreq_valid(cpuid))
- cpufreq_update_policy(cpuid);
+ mutex_lock(&cooling_cpufreq_lock);
+ list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+ if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) {
+ mutex_unlock(&cooling_cpufreq_lock);
+ return get_level(cpufreq_dev, freq);
+ }
}
+ mutex_unlock(&cooling_cpufreq_lock);
- return 0;
+ pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu);
+ return THERMAL_CSTATE_INVALID;
}
+EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level);
/**
* cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
@@ -324,11 +195,6 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
&cpufreq_dev->allowed_cpus))
continue;
- if (!cpufreq_dev->cpufreq_val)
- cpufreq_dev->cpufreq_val = get_cpu_frequency(
- cpumask_any(&cpufreq_dev->allowed_cpus),
- cpufreq_dev->cpufreq_state);
-
max_freq = cpufreq_dev->cpufreq_val;
if (policy->max != max_freq)
@@ -355,19 +221,9 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
unsigned long *state)
{
struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
- struct cpumask *mask = &cpufreq_device->allowed_cpus;
- unsigned int cpu;
- unsigned int count = 0;
- int ret;
-
- cpu = cpumask_any(mask);
-
- ret = get_property(cpu, 0, &count, GET_MAXL);
- if (count > 0)
- *state = count;
-
- return ret;
+ *state = cpufreq_device->max_level;
+ return 0;
}
/**
@@ -404,8 +260,24 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
unsigned long state)
{
struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
+ unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus);
+ unsigned int clip_freq;
+
+ /* Request state should be less than max_level */
+ if (WARN_ON(state > cpufreq_device->max_level))
+ return -EINVAL;
+
+ /* Check if the old cooling action is same as new cooling action */
+ if (cpufreq_device->cpufreq_state == state)
+ return 0;
- return cpufreq_apply_cooling(cpufreq_device, state);
+ clip_freq = cpufreq_device->freq_table[state];
+ cpufreq_device->cpufreq_state = state;
+ cpufreq_device->cpufreq_val = clip_freq;
+
+ cpufreq_update_policy(cpu);
+
+ return 0;
}
/* Bind cpufreq callbacks to thermal cooling device ops */
@@ -420,10 +292,25 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
.notifier_call = cpufreq_thermal_notifier,
};
+static unsigned int find_next_max(struct cpufreq_frequency_table *table,
+ unsigned int prev_max)
+{
+ struct cpufreq_frequency_table *pos;
+ unsigned int max = 0;
+
+ cpufreq_for_each_valid_entry(pos, table) {
+ if (pos->frequency > max && pos->frequency < prev_max)
+ max = pos->frequency;
+ }
+
+ return max;
+}
+
/**
* __cpufreq_cooling_register - helper function to create cpufreq cooling device
* @np: a valid struct device_node to the cooling device device tree node
* @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ * Normally this should be same as cpufreq policy->related_cpus.
*
* This interface function registers the cpufreq cooling device with the name
* "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
@@ -438,37 +325,42 @@ __cpufreq_cooling_register(struct device_node *np,
const struct cpumask *clip_cpus)
{
struct thermal_cooling_device *cool_dev;
- struct cpufreq_cooling_device *cpufreq_dev = NULL;
- unsigned int min = 0, max = 0;
+ struct cpufreq_cooling_device *cpufreq_dev;
char dev_name[THERMAL_NAME_LENGTH];
- int ret = 0, i;
- struct cpufreq_policy policy;
+ struct cpufreq_frequency_table *pos, *table;
+ unsigned int freq, i;
+ int ret;
- /* Verify that all the clip cpus have same freq_min, freq_max limit */
- for_each_cpu(i, clip_cpus) {
- /* continue if cpufreq policy not found and not return error */
- if (!cpufreq_get_policy(&policy, i))
- continue;
- if (min == 0 && max == 0) {
- min = policy.cpuinfo.min_freq;
- max = policy.cpuinfo.max_freq;
- } else {
- if (min != policy.cpuinfo.min_freq ||
- max != policy.cpuinfo.max_freq)
- return ERR_PTR(-EINVAL);
- }
+ table = cpufreq_frequency_get_table(cpumask_first(clip_cpus));
+ if (!table) {
+ pr_debug("%s: CPUFreq table not found\n", __func__);
+ return ERR_PTR(-EPROBE_DEFER);
}
- cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device),
- GFP_KERNEL);
+
+ cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL);
if (!cpufreq_dev)
return ERR_PTR(-ENOMEM);
+ /* Find max levels */
+ cpufreq_for_each_valid_entry(pos, table)
+ cpufreq_dev->max_level++;
+
+ cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) *
+ cpufreq_dev->max_level, GFP_KERNEL);
+ if (!cpufreq_dev->freq_table) {
+ cool_dev = ERR_PTR(-ENOMEM);
+ goto free_cdev;
+ }
+
+ /* max_level is an index, not a counter */
+ cpufreq_dev->max_level--;
+
cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
if (ret) {
- kfree(cpufreq_dev);
- return ERR_PTR(-EINVAL);
+ cool_dev = ERR_PTR(ret);
+ goto free_table;
}
snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
@@ -476,25 +368,44 @@ __cpufreq_cooling_register(struct device_node *np,
cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
&cpufreq_cooling_ops);
- if (IS_ERR(cool_dev)) {
- release_idr(&cpufreq_idr, cpufreq_dev->id);
- kfree(cpufreq_dev);
- return cool_dev;
+ if (IS_ERR(cool_dev))
+ goto remove_idr;
+
+ /* Fill freq-table in descending order of frequencies */
+ for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) {
+ freq = find_next_max(table, freq);
+ cpufreq_dev->freq_table[i] = freq;
+
+ /* Warn for duplicate entries */
+ if (!freq)
+ pr_warn("%s: table has duplicate entries\n", __func__);
+ else
+ pr_debug("%s: freq:%u KHz\n", __func__, freq);
}
+
+ cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
cpufreq_dev->cool_dev = cool_dev;
- cpufreq_dev->cpufreq_state = 0;
+
mutex_lock(&cooling_cpufreq_lock);
/* Register the notifier for first cpufreq cooling device */
- if (cpufreq_dev_count == 0)
+ if (list_empty(&cpufreq_dev_list))
cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
- cpufreq_dev_count++;
list_add(&cpufreq_dev->node, &cpufreq_dev_list);
mutex_unlock(&cooling_cpufreq_lock);
return cool_dev;
+
+remove_idr:
+ release_idr(&cpufreq_idr, cpufreq_dev->id);
+free_table:
+ kfree(cpufreq_dev->freq_table);
+free_cdev:
+ kfree(cpufreq_dev);
+
+ return cool_dev;
}
/**
@@ -555,16 +466,16 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
cpufreq_dev = cdev->devdata;
mutex_lock(&cooling_cpufreq_lock);
list_del(&cpufreq_dev->node);
- cpufreq_dev_count--;
/* Unregister the notifier for the last cpufreq cooling device */
- if (cpufreq_dev_count == 0)
+ if (list_empty(&cpufreq_dev_list))
cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
mutex_unlock(&cooling_cpufreq_lock);
thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
release_idr(&cpufreq_idr, cpufreq_dev->id);
+ kfree(cpufreq_dev->freq_table);
kfree(cpufreq_dev);
}
EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister);
diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c
index 000d53e934a0..607b62c7e611 100644
--- a/drivers/thermal/db8500_cpufreq_cooling.c
+++ b/drivers/thermal/db8500_cpufreq_cooling.c
@@ -18,7 +18,6 @@
*/
#include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -28,18 +27,17 @@
static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
{
struct thermal_cooling_device *cdev;
- struct cpumask mask_val;
-
- /* make sure cpufreq driver has been initialized */
- if (!cpufreq_frequency_get_table(0))
- return -EPROBE_DEFER;
-
- cpumask_set_cpu(0, &mask_val);
- cdev = cpufreq_cooling_register(&mask_val);
+ cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(cdev)) {
- dev_err(&pdev->dev, "Failed to register cooling device\n");
- return PTR_ERR(cdev);
+ int ret = PTR_ERR(cdev);
+
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to register cooling device %d\n",
+ ret);
+
+ return ret;
}
platform_set_drvdata(pdev, cdev);
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 88b32f942dcf..c1188ac053c9 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -9,7 +9,6 @@
#include <linux/clk.h>
#include <linux/cpu_cooling.h>
-#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
@@ -454,15 +453,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
const struct of_device_id *of_id =
of_match_device(of_imx_thermal_match, &pdev->dev);
struct imx_thermal_data *data;
- struct cpumask clip_cpus;
struct regmap *map;
int measure_freq;
int ret;
- if (!cpufreq_get_current_driver()) {
- dev_dbg(&pdev->dev, "no cpufreq driver!");
- return -EPROBE_DEFER;
- }
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -516,12 +510,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
- cpumask_set_cpu(0, &clip_cpus);
- data->cdev = cpufreq_cooling_register(&clip_cpus);
+ data->cdev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(data->cdev)) {
ret = PTR_ERR(data->cdev);
- dev_err(&pdev->dev,
- "failed to register cpufreq cooling device: %d\n", ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to register cpufreq cooling device: %d\n",
+ ret);
return ret;
}
diff --git a/drivers/thermal/int340x_thermal/Makefile b/drivers/thermal/int340x_thermal/Makefile
index ffe40bffaf1a..d4413698a85f 100644
--- a/drivers/thermal/int340x_thermal/Makefile
+++ b/drivers/thermal/int340x_thermal/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_INT340X_THERMAL) += int3400_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o
obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o
+obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device.o
obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o
diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
index e4e61b3fb11e..231cabc16e16 100644
--- a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
+++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
@@ -82,7 +82,7 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" };
if (!acpi_has_method(handle, "_TRT"))
- return 0;
+ return -ENODEV;
status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer);
if (ACPI_FAILURE(status))
@@ -167,7 +167,7 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" };
if (!acpi_has_method(handle, "_ART"))
- return 0;
+ return -ENODEV;
status = acpi_evaluate_object(handle, "_ART", NULL, &buffer);
if (ACPI_FAILURE(status))
@@ -321,8 +321,8 @@ static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd,
unsigned long length = 0;
int count = 0;
char __user *arg = (void __user *)__arg;
- struct trt *trts;
- struct art *arts;
+ struct trt *trts = NULL;
+ struct art *arts = NULL;
switch (cmd) {
case ACPI_THERMAL_GET_TRT_COUNT:
diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c
index dcb306ea14a4..65a98a97df07 100644
--- a/drivers/thermal/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3400_thermal.c
@@ -335,7 +335,6 @@ static struct platform_driver int3400_thermal_driver = {
.remove = int3400_thermal_remove,
.driver = {
.name = "int3400 thermal",
- .owner = THIS_MODULE,
.acpi_match_table = ACPI_PTR(int3400_thermal_match),
},
};
diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c b/drivers/thermal/int340x_thermal/int3402_thermal.c
index a5d08c14ba24..c5cbc3af3a05 100644
--- a/drivers/thermal/int340x_thermal/int3402_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3402_thermal.c
@@ -231,7 +231,6 @@ static struct platform_driver int3402_thermal_driver = {
.remove = int3402_thermal_remove,
.driver = {
.name = "int3402 thermal",
- .owner = THIS_MODULE,
.acpi_match_table = int3402_thermal_match,
},
};
diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c
index 1bfa6a69e77a..0faf500d8a77 100644
--- a/drivers/thermal/int340x_thermal/int3403_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3403_thermal.c
@@ -301,6 +301,8 @@ static int int3403_sensor_remove(struct int3403_priv *priv)
{
struct int3403_sensor *obj = priv->priv;
+ acpi_remove_notify_handler(priv->adev->handle,
+ ACPI_DEVICE_NOTIFY, int3403_notify);
thermal_zone_device_unregister(obj->tzone);
return 0;
}
@@ -369,6 +371,7 @@ static int int3403_cdev_add(struct int3403_priv *priv)
p = buf.pointer;
if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
printk(KERN_WARNING "Invalid PPSS data\n");
+ kfree(buf.pointer);
return -EFAULT;
}
@@ -381,6 +384,7 @@ static int int3403_cdev_add(struct int3403_priv *priv)
priv->priv = obj;
+ kfree(buf.pointer);
/* TODO: add ACPI notification support */
return result;
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
new file mode 100644
index 000000000000..31bb553aac26
--- /dev/null
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -0,0 +1,309 @@
+/*
+ * processor_thermal_device.c
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+
+/* Broadwell-U/HSB thermal reporting device */
+#define PCI_DEVICE_ID_PROC_BDW_THERMAL 0x1603
+#define PCI_DEVICE_ID_PROC_HSB_THERMAL 0x0A03
+
+/* Braswell thermal reporting device */
+#define PCI_DEVICE_ID_PROC_BSW_THERMAL 0x22DC
+
+struct power_config {
+ u32 index;
+ u32 min_uw;
+ u32 max_uw;
+ u32 tmin_us;
+ u32 tmax_us;
+ u32 step_uw;
+};
+
+struct proc_thermal_device {
+ struct device *dev;
+ struct acpi_device *adev;
+ struct power_config power_limits[2];
+};
+
+enum proc_thermal_emum_mode_type {
+ PROC_THERMAL_NONE,
+ PROC_THERMAL_PCI,
+ PROC_THERMAL_PLATFORM_DEV
+};
+
+/*
+ * We can have only one type of enumeration, PCI or Platform,
+ * not both. So we don't need instance specific data.
+ */
+static enum proc_thermal_emum_mode_type proc_thermal_emum_mode =
+ PROC_THERMAL_NONE;
+
+#define POWER_LIMIT_SHOW(index, suffix) \
+static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct pci_dev *pci_dev; \
+ struct platform_device *pdev; \
+ struct proc_thermal_device *proc_dev; \
+\
+ if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \
+ pdev = to_platform_device(dev); \
+ proc_dev = platform_get_drvdata(pdev); \
+ } else { \
+ pci_dev = to_pci_dev(dev); \
+ proc_dev = pci_get_drvdata(pci_dev); \
+ } \
+ return sprintf(buf, "%lu\n",\
+ (unsigned long)proc_dev->power_limits[index].suffix * 1000); \
+}
+
+POWER_LIMIT_SHOW(0, min_uw)
+POWER_LIMIT_SHOW(0, max_uw)
+POWER_LIMIT_SHOW(0, step_uw)
+POWER_LIMIT_SHOW(0, tmin_us)
+POWER_LIMIT_SHOW(0, tmax_us)
+
+POWER_LIMIT_SHOW(1, min_uw)
+POWER_LIMIT_SHOW(1, max_uw)
+POWER_LIMIT_SHOW(1, step_uw)
+POWER_LIMIT_SHOW(1, tmin_us)
+POWER_LIMIT_SHOW(1, tmax_us)
+
+static DEVICE_ATTR_RO(power_limit_0_min_uw);
+static DEVICE_ATTR_RO(power_limit_0_max_uw);
+static DEVICE_ATTR_RO(power_limit_0_step_uw);
+static DEVICE_ATTR_RO(power_limit_0_tmin_us);
+static DEVICE_ATTR_RO(power_limit_0_tmax_us);
+
+static DEVICE_ATTR_RO(power_limit_1_min_uw);
+static DEVICE_ATTR_RO(power_limit_1_max_uw);
+static DEVICE_ATTR_RO(power_limit_1_step_uw);
+static DEVICE_ATTR_RO(power_limit_1_tmin_us);
+static DEVICE_ATTR_RO(power_limit_1_tmax_us);
+
+static struct attribute *power_limit_attrs[] = {
+ &dev_attr_power_limit_0_min_uw.attr,
+ &dev_attr_power_limit_1_min_uw.attr,
+ &dev_attr_power_limit_0_max_uw.attr,
+ &dev_attr_power_limit_1_max_uw.attr,
+ &dev_attr_power_limit_0_step_uw.attr,
+ &dev_attr_power_limit_1_step_uw.attr,
+ &dev_attr_power_limit_0_tmin_us.attr,
+ &dev_attr_power_limit_1_tmin_us.attr,
+ &dev_attr_power_limit_0_tmax_us.attr,
+ &dev_attr_power_limit_1_tmax_us.attr,
+ NULL
+};
+
+static struct attribute_group power_limit_attribute_group = {
+ .attrs = power_limit_attrs,
+ .name = "power_limits"
+};
+
+static int proc_thermal_add(struct device *dev,
+ struct proc_thermal_device **priv)
+{
+ struct proc_thermal_device *proc_priv;
+ struct acpi_device *adev;
+ acpi_status status;
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *elements, *ppcc;
+ union acpi_object *p;
+ int i;
+ int ret;
+
+ adev = ACPI_COMPANION(dev);
+
+ status = acpi_evaluate_object(adev->handle, "PPCC", NULL, &buf);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ p = buf.pointer;
+ if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+ dev_err(dev, "Invalid PPCC data\n");
+ ret = -EFAULT;
+ goto free_buffer;
+ }
+ if (!p->package.count) {
+ dev_err(dev, "Invalid PPCC package size\n");
+ ret = -EFAULT;
+ goto free_buffer;
+ }
+
+ proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL);
+ if (!proc_priv) {
+ ret = -ENOMEM;
+ goto free_buffer;
+ }
+
+ proc_priv->dev = dev;
+ proc_priv->adev = adev;
+
+ for (i = 0; i < min((int)p->package.count - 1, 2); ++i) {
+ elements = &(p->package.elements[i+1]);
+ if (elements->type != ACPI_TYPE_PACKAGE ||
+ elements->package.count != 6) {
+ ret = -EFAULT;
+ goto free_buffer;
+ }
+ ppcc = elements->package.elements;
+ proc_priv->power_limits[i].index = ppcc[0].integer.value;
+ proc_priv->power_limits[i].min_uw = ppcc[1].integer.value;
+ proc_priv->power_limits[i].max_uw = ppcc[2].integer.value;
+ proc_priv->power_limits[i].tmin_us = ppcc[3].integer.value;
+ proc_priv->power_limits[i].tmax_us = ppcc[4].integer.value;
+ proc_priv->power_limits[i].step_uw = ppcc[5].integer.value;
+ }
+
+ *priv = proc_priv;
+
+ ret = sysfs_create_group(&dev->kobj,
+ &power_limit_attribute_group);
+
+free_buffer:
+ kfree(buf.pointer);
+
+ return ret;
+}
+
+void proc_thermal_remove(struct proc_thermal_device *proc_priv)
+{
+ sysfs_remove_group(&proc_priv->dev->kobj,
+ &power_limit_attribute_group);
+}
+
+static int int3401_add(struct platform_device *pdev)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ if (proc_thermal_emum_mode == PROC_THERMAL_PCI) {
+ dev_err(&pdev->dev, "error: enumerated as PCI dev\n");
+ return -ENODEV;
+ }
+
+ ret = proc_thermal_add(&pdev->dev, &proc_priv);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, proc_priv);
+ proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV;
+
+ return 0;
+}
+
+static int int3401_remove(struct platform_device *pdev)
+{
+ proc_thermal_remove(platform_get_drvdata(pdev));
+
+ return 0;
+}
+
+static int proc_thermal_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *unused)
+{
+ struct proc_thermal_device *proc_priv;
+ int ret;
+
+ if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) {
+ dev_err(&pdev->dev, "error: enumerated as platform dev\n");
+ return -ENODEV;
+ }
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "error: could not enable device\n");
+ return ret;
+ }
+
+ ret = proc_thermal_add(&pdev->dev, &proc_priv);
+ if (ret) {
+ pci_disable_device(pdev);
+ return ret;
+ }
+
+ pci_set_drvdata(pdev, proc_priv);
+ proc_thermal_emum_mode = PROC_THERMAL_PCI;
+
+ return 0;
+}
+
+static void proc_thermal_pci_remove(struct pci_dev *pdev)
+{
+ proc_thermal_remove(pci_get_drvdata(pdev));
+ pci_disable_device(pdev);
+}
+
+static const struct pci_device_id proc_thermal_pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BDW_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_HSB_THERMAL)},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BSW_THERMAL)},
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids);
+
+static struct pci_driver proc_thermal_pci_driver = {
+ .name = "proc_thermal",
+ .probe = proc_thermal_pci_probe,
+ .remove = proc_thermal_pci_remove,
+ .id_table = proc_thermal_pci_ids,
+};
+
+static const struct acpi_device_id int3401_device_ids[] = {
+ {"INT3401", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3401_device_ids);
+
+static struct platform_driver int3401_driver = {
+ .probe = int3401_add,
+ .remove = int3401_remove,
+ .driver = {
+ .name = "int3401 thermal",
+ .acpi_match_table = int3401_device_ids,
+ },
+};
+
+static int __init proc_thermal_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&int3401_driver);
+ if (ret)
+ return ret;
+
+ ret = pci_register_driver(&proc_thermal_pci_driver);
+
+ return ret;
+}
+
+static void __exit proc_thermal_exit(void)
+{
+ platform_driver_unregister(&int3401_driver);
+ pci_unregister_driver(&proc_thermal_pci_driver);
+}
+
+module_init(proc_thermal_init);
+module_exit(proc_thermal_exit);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index e98b4249187c..6ceebd659dd4 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -688,6 +688,7 @@ static const struct x86_cpu_id intel_powerclamp_ids[] = {
{ X86_VENDOR_INTEL, 6, 0x45},
{ X86_VENDOR_INTEL, 6, 0x46},
{ X86_VENDOR_INTEL, 6, 0x4c},
+ { X86_VENDOR_INTEL, 6, 0x56},
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 1bcddfc60e91..9c6ce548e363 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -677,7 +677,6 @@ static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops,
static struct platform_driver rockchip_thermal_driver = {
.driver = {
.name = "rockchip-thermal",
- .owner = THIS_MODULE,
.pm = &rockchip_thermal_pm_ops,
.of_match_table = of_rockchip_thermal_match,
},
diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
index f760389a204c..c43306ecc0ab 100644
--- a/drivers/thermal/samsung/Kconfig
+++ b/drivers/thermal/samsung/Kconfig
@@ -1,6 +1,6 @@
config EXYNOS_THERMAL
tristate "Exynos thermal management unit driver"
- depends on ARCH_HAS_BANDGAP && OF
+ depends on OF
help
If you say yes here you get support for the TMU (Thermal Management
Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises
diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index b6be572704a4..6dc3815cc73f 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -347,7 +347,6 @@ void exynos_report_trigger(struct thermal_sensor_conf *conf)
int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
{
int ret;
- struct cpumask mask_val;
struct exynos_thermal_zone *th_zone;
if (!sensor_conf || !sensor_conf->read_temperature) {
@@ -367,13 +366,14 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
* sensor
*/
if (sensor_conf->cooling_data.freq_clip_count > 0) {
- cpumask_set_cpu(0, &mask_val);
th_zone->cool_dev[th_zone->cool_dev_size] =
- cpufreq_cooling_register(&mask_val);
+ cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) {
- dev_err(sensor_conf->dev,
- "Failed to register cpufreq cooling device\n");
- ret = -EINVAL;
+ ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]);
+ if (ret != -EPROBE_DEFER)
+ dev_err(sensor_conf->dev,
+ "Failed to register cpufreq cooling device: %d\n",
+ ret);
goto err_unregister;
}
th_zone->cool_dev_size++;
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index d44d91d681d4..d2f1e62a4232 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -927,7 +927,10 @@ static int exynos_tmu_probe(struct platform_device *pdev)
/* Register the sensor with thermal management interface */
ret = exynos_register_thermal(sensor_conf);
if (ret) {
- dev_err(&pdev->dev, "Failed to register thermal interface\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Failed to register thermal interface: %d\n",
+ ret);
goto err_clk;
}
data->reg_conf = sensor_conf;
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 84fdf0792e27..87e0b0782023 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -930,7 +930,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
struct thermal_zone_device *pos1;
struct thermal_cooling_device *pos2;
unsigned long max_state;
- int result;
+ int result, ret;
if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
return -EINVAL;
@@ -947,7 +947,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
if (tz != pos1 || cdev != pos2)
return -EINVAL;
- cdev->ops->get_max_state(cdev, &max_state);
+ ret = cdev->ops->get_max_state(cdev, &max_state);
+ if (ret)
+ return ret;
/* lower default 0, upper default max_state */
lower = lower == THERMAL_NO_LIMIT ? 0 : lower;
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 5fd03865e396..3fb054a10f6a 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -28,7 +28,6 @@
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/thermal.h>
-#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
#include <linux/of.h>
@@ -407,17 +406,17 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
if (!data)
return -EINVAL;
- if (!cpufreq_get_current_driver()) {
- dev_dbg(bgp->dev, "no cpufreq driver yet\n");
- return -EPROBE_DEFER;
- }
-
/* Register cooling device */
data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR(data->cool_dev)) {
- dev_err(bgp->dev,
- "Failed to register cpufreq cooling device\n");
- return PTR_ERR(data->cool_dev);
+ int ret = PTR_ERR(data->cool_dev);
+
+ if (ret != -EPROBE_DEFER)
+ dev_err(bgp->dev,
+ "Failed to register cpu cooling device %d\n",
+ ret);
+
+ return ret;
}
ti_bandgap_set_sensor_data(bgp, id, data);