summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/mpc52xx_uart.c74
-rw-r--r--drivers/serial/pmac_zilog.c27
-rw-r--r--drivers/serial/sh-sci.c563
-rw-r--r--drivers/serial/sh-sci.h45
4 files changed, 288 insertions, 421 deletions
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 28c00c3d58f5..0c3a2ab1612c 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -429,14 +429,24 @@ mpc52xx_uart_tx_empty(struct uart_port *port)
static void
mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* Not implemented */
+ if (mctrl & TIOCM_RTS)
+ out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
+ else
+ out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
}
static unsigned int
mpc52xx_uart_get_mctrl(struct uart_port *port)
{
- /* Not implemented */
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ unsigned int ret = TIOCM_DSR;
+ u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+
+ if (!(status & MPC52xx_PSC_CTS))
+ ret |= TIOCM_CTS;
+ if (!(status & MPC52xx_PSC_DCD))
+ ret |= TIOCM_CAR;
+
+ return ret;
}
static void
@@ -479,7 +489,15 @@ mpc52xx_uart_stop_rx(struct uart_port *port)
static void
mpc52xx_uart_enable_ms(struct uart_port *port)
{
- /* Not implemented */
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+
+ /* clear D_*-bits by reading them */
+ in_8(&psc->mpc52xx_psc_ipcr);
+ /* enable CTS and DCD as IPC interrupts */
+ out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
}
static void
@@ -580,6 +598,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
MPC52xx_PSC_MODE_ONE_STOP;
+ if (new->c_cflag & CRTSCTS) {
+ mr1 |= MPC52xx_PSC_MODE_RXRTS;
+ mr2 |= MPC52xx_PSC_MODE_TXCTS;
+ }
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
@@ -617,6 +639,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
out_8(&psc->ctur, ctr >> 8);
out_8(&psc->ctlr, ctr & 0xff);
+ if (UART_ENABLE_MS(port, new->c_cflag))
+ mpc52xx_uart_enable_ms(port);
+
/* Reenable TX & RX */
out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
@@ -752,10 +777,15 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
if (status & MPC52xx_PSC_SR_RB) {
flag = TTY_BREAK;
uart_handle_break(port);
- } else if (status & MPC52xx_PSC_SR_PE)
+ port->icount.brk++;
+ } else if (status & MPC52xx_PSC_SR_PE) {
flag = TTY_PARITY;
- else if (status & MPC52xx_PSC_SR_FE)
+ port->icount.parity++;
+ }
+ else if (status & MPC52xx_PSC_SR_FE) {
flag = TTY_FRAME;
+ port->icount.frame++;
+ }
/* Clear error condition */
out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
@@ -769,6 +799,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
* affect the current character
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ port->icount.overrun++;
}
}
@@ -826,6 +857,7 @@ mpc52xx_uart_int(int irq, void *dev_id)
struct uart_port *port = dev_id;
unsigned long pass = ISR_PASS_LIMIT;
unsigned int keepgoing;
+ u8 status;
spin_lock(&port->lock);
@@ -842,6 +874,13 @@ mpc52xx_uart_int(int irq, void *dev_id)
if (psc_ops->tx_rdy(port))
keepgoing |= mpc52xx_uart_int_tx_chars(port);
+ status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+ if (status & MPC52xx_PSC_D_DCD)
+ uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
+
+ if (status & MPC52xx_PSC_D_CTS)
+ uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS));
+
/* Limit number of iteration */
if (!(--pass))
keepgoing = 0;
@@ -1109,22 +1148,29 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
return ret;
port->mapbase = res.start;
+ if (!port->mapbase) {
+ dev_dbg(&op->dev, "Could not allocate resources for PSC\n");
+ return -EINVAL;
+ }
+
port->irq = irq_of_parse_and_map(op->node, 0);
+ if (port->irq == NO_IRQ) {
+ dev_dbg(&op->dev, "Could not get irq\n");
+ return -EINVAL;
+ }
dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
(void *)port->mapbase, port->irq, port->uartclk);
- if ((port->irq == NO_IRQ) || !port->mapbase) {
- printk(KERN_ERR "Could not allocate resources for PSC\n");
- return -EINVAL;
- }
-
/* Add the port to the uart sub-system */
ret = uart_add_one_port(&mpc52xx_uart_driver, port);
- if (!ret)
- dev_set_drvdata(&op->dev, (void *)port);
+ if (ret) {
+ irq_dispose_mapping(port->irq);
+ return ret;
+ }
- return ret;
+ dev_set_drvdata(&op->dev, (void *)port);
+ return 0;
}
static int
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 317b061f7641..ad3488504010 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1383,6 +1383,29 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
return -EINVAL;
}
+#ifdef CONFIG_CONSOLE_POLL
+
+static int pmz_poll_get_char(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
+ udelay(5);
+ return read_zsdata(uap);
+}
+
+static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ /* Wait for the transmit buffer to empty. */
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+ udelay(5);
+ write_zsdata(uap, c);
+}
+
+#endif
+
static struct uart_ops pmz_pops = {
.tx_empty = pmz_tx_empty,
.set_mctrl = pmz_set_mctrl,
@@ -1400,6 +1423,10 @@ static struct uart_ops pmz_pops = {
.request_port = pmz_request_port,
.config_port = pmz_config_port,
.verify_port = pmz_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = pmz_poll_get_char,
+ .poll_put_char = pmz_poll_put_char,
+#endif
};
/*
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 165fc010978c..557b54ab2f25 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -51,7 +51,6 @@
#ifdef CONFIG_SUPERH
#include <asm/clock.h>
#include <asm/sh_bios.h>
-#include <asm/kgdb.h>
#endif
#include "sh-sci.h"
@@ -65,10 +64,6 @@ struct sci_port {
/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
unsigned int irqs[SCIx_NR_IRQS];
- /* Port pin configuration */
- void (*init_pins)(struct uart_port *port,
- unsigned int cflag);
-
/* Port enable callback */
void (*enable)(struct uart_port *port);
@@ -85,10 +80,6 @@ struct sci_port {
#endif
};
-#ifdef CONFIG_SH_KGDB
-static struct sci_port *kgdb_sci_port;
-#endif
-
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static struct sci_port *serial_console_port;
#endif
@@ -101,21 +92,26 @@ static void sci_stop_tx(struct uart_port *port);
static struct sci_port sci_ports[SCI_NPORTS];
static struct uart_driver sci_uart_driver;
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \
- defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+static inline struct sci_port *
+to_sci_port(struct uart_port *uart)
+{
+ return container_of(uart, struct sci_port, port);
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+
+#ifdef CONFIG_CONSOLE_POLL
static inline void handle_error(struct uart_port *port)
{
/* Clear error flags */
sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
}
-static int get_char(struct uart_port *port)
+static int sci_poll_get_char(struct uart_port *port)
{
- unsigned long flags;
unsigned short status;
int c;
- spin_lock_irqsave(&port->lock, flags);
do {
status = sci_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
@@ -123,23 +119,21 @@ static int get_char(struct uart_port *port)
continue;
}
} while (!(status & SCxSR_RDxF(port)));
+
c = sci_in(port, SCxRDR);
- sci_in(port, SCxSR); /* Dummy read */
+
+ /* Dummy read */
+ sci_in(port, SCxSR);
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
- spin_unlock_irqrestore(&port->lock, flags);
return c;
}
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+#endif
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB)
-static void put_char(struct uart_port *port, char c)
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
{
- unsigned long flags;
unsigned short status;
- spin_lock_irqsave(&port->lock, flags);
-
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
@@ -147,96 +141,22 @@ static void put_char(struct uart_port *port, char c)
sci_in(port, SCxSR); /* Dummy read */
sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
sci_out(port, SCxTDR, c);
-
- spin_unlock_irqrestore(&port->lock, flags);
}
-#endif
-
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static void put_string(struct sci_port *sci_port, const char *buffer, int count)
-{
- struct uart_port *port = &sci_port->port;
- const unsigned char *p = buffer;
- int i;
-
-#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
- int checksum;
- int usegdb=0;
-
-#ifdef CONFIG_SH_STANDARD_BIOS
- /* This call only does a trap the first time it is
- * called, and so is safe to do here unconditionally
- */
- usegdb |= sh_bios_in_gdb_mode();
-#endif
-#ifdef CONFIG_SH_KGDB
- usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
-#endif
-
- if (usegdb) {
- /* $<packet info>#<checksum>. */
- do {
- unsigned char c;
- put_char(port, '$');
- put_char(port, 'O'); /* 'O'utput to console */
- checksum = 'O';
-
- for (i=0; i<count; i++) { /* Don't use run length encoding */
- int h, l;
-
- c = *p++;
- h = hex_asc_hi(c);
- l = hex_asc_lo(c);
- put_char(port, h);
- put_char(port, l);
- checksum += h + l;
- }
- put_char(port, '#');
- put_char(port, hex_asc_hi(checksum));
- put_char(port, hex_asc_lo(checksum));
- } while (get_char(port) != '+');
- } else
-#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
- for (i=0; i<count; i++) {
- if (*p == 10)
- put_char(port, '\r');
- put_char(port, *p++);
- }
-}
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-
-#ifdef CONFIG_SH_KGDB
-static int kgdb_sci_getchar(void)
-{
- int c;
-
- /* Keep trying to read a character, this could be neater */
- while ((c = get_char(&kgdb_sci_port->port)) < 0)
- cpu_relax();
-
- return c;
-}
-
-static inline void kgdb_sci_putchar(int c)
-{
- put_char(&kgdb_sci_port->port, c);
-}
-#endif /* CONFIG_SH_KGDB */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
#if defined(__H8300S__)
enum { sci_disable, sci_enable };
-static void h8300_sci_config(struct uart_port* port, unsigned int ctrl)
+static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
{
- volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+ volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
int ch = (port->mapbase - SMR0) >> 3;
unsigned char mask = 1 << (ch+1);
- if (ctrl == sci_disable) {
+ if (ctrl == sci_disable)
*mstpcrl |= mask;
- } else {
+ else
*mstpcrl &= ~mask;
- }
}
static inline void h8300_sci_enable(struct uart_port *port)
@@ -251,7 +171,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
#endif
#if defined(__H8300H__) || defined(__H8300S__)
-static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
int ch = (port->mapbase - SMR0) >> 3;
@@ -266,141 +186,99 @@ static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
/* tx mark output*/
H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
}
-#else
-#define sci_init_pins_sci NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
-static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
-
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
-
- sci_out(port, SCFCR, fcr_val);
-}
-#else
-#define sci_init_pins_irda NULL
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
-{
- unsigned int fcr_val = 0;
-
- set_sh771x_scif_pfc(port);
- if (cflag & CRTSCTS) {
- fcr_val |= SCFCR_MCE;
- }
- sci_out(port, SCFCR, fcr_val);
+ if (port->mapbase == 0xA4400000) {
+ __raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+ __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+ } else if (port->mapbase == 0xA4410000)
+ __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
if (cflag & CRTSCTS) {
/* enable RTS/CTS */
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 9-2; enable all scif pins but sck */
- data = ctrl_inw(PORT_PTCR);
- ctrl_outw((data & 0xfc03), PORT_PTCR);
+ data = __raw_readw(PORT_PTCR);
+ __raw_writew((data & 0xfc03), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 9-2 */
- data = ctrl_inw(PORT_PVCR);
- ctrl_outw((data & 0xfc03), PORT_PVCR);
+ data = __raw_readw(PORT_PVCR);
+ __raw_writew((data & 0xfc03), PORT_PVCR);
}
- fcr_val |= SCFCR_MCE;
} else {
if (port->mapbase == 0xa4430000) { /* SCIF0 */
/* Clear PTCR bit 5-2; enable only tx and rx */
- data = ctrl_inw(PORT_PTCR);
- ctrl_outw((data & 0xffc3), PORT_PTCR);
+ data = __raw_readw(PORT_PTCR);
+ __raw_writew((data & 0xffc3), PORT_PTCR);
} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
/* Clear PVCR bit 5-2 */
- data = ctrl_inw(PORT_PVCR);
- ctrl_outw((data & 0xffc3), PORT_PVCR);
+ data = __raw_readw(PORT_PVCR);
+ __raw_writew((data & 0xffc3), PORT_PVCR);
}
}
- sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
/* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
+ data = __raw_readw(SCPCR);
/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
- ctrl_outw(data & 0x0fcf, SCPCR);
+ __raw_writew(data & 0x0fcf, SCPCR);
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
- else {
+ if (!(cflag & CRTSCTS)) {
/* We need to set SCPCR to enable RTS/CTS */
- data = ctrl_inw(SCPCR);
+ data = __raw_readw(SCPCR);
/* Clear out SCP7MD1,0, SCP4MD1,0,
Set SCP6MD1,0 = {01} (output) */
- ctrl_outw((data & 0x0fcf) | 0x1000, SCPCR);
+ __raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
data = ctrl_inb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
ctrl_outb(data & 0xbf, SCPDR);
}
-
- sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
- unsigned int fcr_val = 0;
unsigned short data;
if (port->mapbase == 0xffe00000) {
- data = ctrl_inw(PSCR);
+ data = __raw_readw(PSCR);
data &= ~0x03cf;
- if (cflag & CRTSCTS)
- fcr_val |= SCFCR_MCE;
- else
+ if (!(cflag & CRTSCTS))
data |= 0x0340;
- ctrl_outw(data, PSCR);
+ __raw_writew(data, PSCR);
}
- /* SCIF1 and SCIF2 should be setup by board code */
-
- sci_out(port, SCFCR, fcr_val);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- /* Nothing to do here.. */
- sci_out(port, SCFCR, 0);
}
-#else
-/* For SH7750 */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- unsigned int fcr_val = 0;
-
- if (cflag & CRTSCTS) {
- fcr_val |= SCFCR_MCE;
- } else {
-#if defined(CONFIG_CPU_SUBTYPE_SH7343) || defined(CONFIG_CPU_SUBTYPE_SH7366)
- /* Nothing */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
- ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ if (!(cflag & CRTSCTS))
+ __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */
+}
+#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A)
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ if (!(cflag & CRTSCTS))
+ __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */
+}
#else
- ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
-#endif
- }
- sci_out(port, SCFCR, fcr_val);
+static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ /* Nothing to do */
}
#endif
@@ -419,18 +297,26 @@ static inline int scif_rxroom(struct uart_port *port)
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
static inline int scif_txroom(struct uart_port *port)
{
- if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+ if ((port->mapbase == 0xffe00000) ||
+ (port->mapbase == 0xffe08000)) {
+ /* SCIF0/1*/
return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
- else /* SCIF2 */
+ } else {
+ /* SCIF2 */
return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+ }
}
static inline int scif_rxroom(struct uart_port *port)
{
- if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/
+ if ((port->mapbase == 0xffe00000) ||
+ (port->mapbase == 0xffe08000)) {
+ /* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
- else /* SCIF2 */
+ } else {
+ /* SCIF2 */
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+ }
}
#else
static inline int scif_txroom(struct uart_port *port)
@@ -446,12 +332,12 @@ static inline int scif_rxroom(struct uart_port *port)
static inline int sci_txroom(struct uart_port *port)
{
- return ((sci_in(port, SCxSR) & SCI_TDRE) != 0);
+ return (sci_in(port, SCxSR) & SCI_TDRE) != 0;
}
static inline int sci_rxroom(struct uart_port *port)
{
- return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0);
+ return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
}
/* ********************************************************************** *
@@ -469,11 +355,10 @@ static void sci_transmit_chars(struct uart_port *port)
status = sci_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
ctrl = sci_in(port, SCSCR);
- if (uart_circ_empty(xmit)) {
+ if (uart_circ_empty(xmit))
ctrl &= ~SCI_CTRL_FLAGS_TIE;
- } else {
+ else
ctrl |= SCI_CTRL_FLAGS_TIE;
- }
sci_out(port, SCSCR, ctrl);
return;
}
@@ -521,11 +406,11 @@ static void sci_transmit_chars(struct uart_port *port)
}
/* On SH3, SCIF may read end-of-break as a space->mark char */
-#define STEPFN(c) ({int __c=(c); (((__c-1)|(__c)) == -1); })
+#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
static inline void sci_receive_chars(struct uart_port *port)
{
- struct sci_port *sci_port = (struct sci_port *)port;
+ struct sci_port *sci_port = to_sci_port(port);
struct tty_struct *tty = port->info->port.tty;
int i, count, copied = 0;
unsigned short status;
@@ -550,13 +435,13 @@ static inline void sci_receive_chars(struct uart_port *port)
if (port->type == PORT_SCI) {
char c = sci_in(port, SCxRDR);
- if (uart_handle_sysrq_char(port, c) || sci_port->break_flag)
+ if (uart_handle_sysrq_char(port, c) ||
+ sci_port->break_flag)
count = 0;
- else {
+ else
tty_insert_flip_char(tty, c, TTY_NORMAL);
- }
} else {
- for (i=0; i<count; i++) {
+ for (i = 0; i < count; i++) {
char c = sci_in(port, SCxRDR);
status = sci_in(port, SCxSR);
#if defined(CONFIG_CPU_SH3)
@@ -569,7 +454,7 @@ static inline void sci_receive_chars(struct uart_port *port)
}
/* Nonzero => end-of-break */
- pr_debug("scif: debounce<%02x>\n", c);
+ dev_dbg(port->dev, "debounce<%02x>\n", c);
sci_port->break_flag = 0;
if (STEPFN(c)) {
@@ -586,12 +471,13 @@ static inline void sci_receive_chars(struct uart_port *port)
/* Store data and status */
if (status&SCxSR_FER(port)) {
flag = TTY_FRAME;
- pr_debug("sci: frame error\n");
+ dev_notice(port->dev, "frame error\n");
} else if (status&SCxSR_PER(port)) {
flag = TTY_PARITY;
- pr_debug("sci: parity error\n");
+ dev_notice(port->dev, "parity error\n");
} else
flag = TTY_NORMAL;
+
tty_insert_flip_char(tty, c, flag);
}
}
@@ -651,13 +537,14 @@ static inline int sci_handle_errors(struct uart_port *port)
/* overrun error */
if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
copied++;
- pr_debug("sci: overrun error\n");
+
+ dev_notice(port->dev, "overrun error");
}
if (status & SCxSR_FER(port)) {
if (sci_rxd_in(port) == 0) {
/* Notify of BREAK */
- struct sci_port *sci_port = (struct sci_port *)port;
+ struct sci_port *sci_port = to_sci_port(port);
if (!sci_port->break_flag) {
sci_port->break_flag = 1;
@@ -666,15 +553,19 @@ static inline int sci_handle_errors(struct uart_port *port)
/* Do sysrq handling. */
if (uart_handle_break(port))
return 0;
- pr_debug("sci: BREAK detected\n");
+
+ dev_dbg(port->dev, "BREAK detected\n");
+
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
- copied++;
- }
+ copied++;
+ }
+
} else {
/* frame error */
if (tty_insert_flip_char(tty, 0, TTY_FRAME))
copied++;
- pr_debug("sci: frame error\n");
+
+ dev_notice(port->dev, "frame error\n");
}
}
@@ -682,7 +573,8 @@ static inline int sci_handle_errors(struct uart_port *port)
/* parity error */
if (tty_insert_flip_char(tty, 0, TTY_PARITY))
copied++;
- pr_debug("sci: parity error\n");
+
+ dev_notice(port->dev, "parity error");
}
if (copied)
@@ -691,6 +583,27 @@ static inline int sci_handle_errors(struct uart_port *port)
return copied;
}
+static inline int sci_handle_fifo_overrun(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->port.tty;
+ int copied = 0;
+
+ if (port->type != PORT_SCIF)
+ return 0;
+
+ if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+ sci_out(port, SCLSR, 0);
+
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ tty_flip_buffer_push(tty);
+
+ dev_notice(port->dev, "overrun error\n");
+ copied++;
+ }
+
+ return copied;
+}
+
static inline int sci_handle_breaks(struct uart_port *port)
{
int copied = 0;
@@ -709,23 +622,15 @@ static inline int sci_handle_breaks(struct uart_port *port)
/* Notify of BREAK */
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
- pr_debug("sci: BREAK detected\n");
- }
-#if defined(SCIF_ORER)
- /* XXX: Handle SCIF overrun error */
- if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
- sci_out(port, SCLSR, 0);
- if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) {
- copied++;
- pr_debug("sci: overrun error\n");
- }
+ dev_dbg(port->dev, "BREAK detected\n");
}
-#endif
if (copied)
tty_flip_buffer_push(tty);
+ copied += sci_handle_fifo_overrun(port);
+
return copied;
}
@@ -763,16 +668,7 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr)
sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
} else {
-#if defined(SCIF_ORER)
- if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
- struct tty_struct *tty = port->info->port.tty;
-
- sci_out(port, SCLSR, 0);
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- tty_flip_buffer_push(tty);
- pr_debug("scif: overrun error\n");
- }
-#endif
+ sci_handle_fifo_overrun(port);
sci_rx_interrupt(irq, ptr);
}
@@ -801,8 +697,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
struct uart_port *port = ptr;
irqreturn_t ret = IRQ_NONE;
- ssr_status = sci_in(port,SCxSR);
- scr_status = sci_in(port,SCSCR);
+ ssr_status = sci_in(port, SCxSR);
+ scr_status = sci_in(port, SCSCR);
/* Tx Interrupt */
if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
@@ -820,7 +716,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
return ret;
}
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
/*
* Here we define a transistion notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
@@ -828,41 +724,20 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
static int sci_notifier(struct notifier_block *self,
unsigned long phase, void *p)
{
- struct cpufreq_freqs *freqs = p;
int i;
if ((phase == CPUFREQ_POSTCHANGE) ||
- (phase == CPUFREQ_RESUMECHANGE)){
+ (phase == CPUFREQ_RESUMECHANGE))
for (i = 0; i < SCI_NPORTS; i++) {
- struct uart_port *port = &sci_ports[i].port;
- struct clk *clk;
-
- /*
- * Update the uartclk per-port if frequency has
- * changed, since it will no longer necessarily be
- * consistent with the old frequency.
- *
- * Really we want to be able to do something like
- * uart_change_speed() or something along those lines
- * here to implicitly reset the per-port baud rate..
- *
- * Clean this up later..
- */
- clk = clk_get(NULL, "module_clk");
- port->uartclk = clk_get_rate(clk);
- clk_put(clk);
+ struct sci_port *s = &sci_ports[i];
+ s->port.uartclk = clk_get_rate(s->clk);
}
- printk(KERN_INFO "%s: got a postchange notification "
- "for cpu %d (old %d, new %d)\n",
- __func__, freqs->cpu, freqs->old, freqs->new);
- }
-
return NOTIFY_OK;
}
static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
+#endif
static int sci_request_irq(struct sci_port *port)
{
@@ -875,23 +750,22 @@ static int sci_request_irq(struct sci_port *port)
"SCI Transmit Data Empty", "SCI Break" };
if (port->irqs[0] == port->irqs[1]) {
- if (!port->irqs[0]) {
- printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
+ if (unlikely(!port->irqs[0]))
return -ENODEV;
- }
if (request_irq(port->irqs[0], sci_mpxed_interrupt,
IRQF_DISABLED, "sci", port)) {
- printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ dev_err(port->port.dev, "Can't allocate IRQ\n");
return -ENODEV;
}
} else {
for (i = 0; i < ARRAY_SIZE(handlers); i++) {
- if (!port->irqs[i])
+ if (unlikely(!port->irqs[i]))
continue;
+
if (request_irq(port->irqs[i], handlers[i],
IRQF_DISABLED, desc[i], port)) {
- printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ dev_err(port->port.dev, "Can't allocate IRQ\n");
return -ENODEV;
}
}
@@ -904,12 +778,9 @@ static void sci_free_irq(struct sci_port *port)
{
int i;
- if (port->irqs[0] == port->irqs[1]) {
- if (!port->irqs[0])
- printk("sci: sci_free_irq error\n");
- else
- free_irq(port->irqs[0], port);
- } else {
+ if (port->irqs[0] == port->irqs[1])
+ free_irq(port->irqs[0], port);
+ else {
for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
if (!port->irqs[i])
continue;
@@ -1028,7 +899,6 @@ static void sci_shutdown(struct uart_port *port)
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
int t = -1;
@@ -1060,32 +930,36 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_out(port, SCSMR, smr_val);
if (t > 0) {
- if(t >= 256) {
+ if (t >= 256) {
sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
t >>= 2;
- } else {
+ } else
sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
- }
+
sci_out(port, SCBRR, t);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
- if (likely(s->init_pins))
- s->init_pins(port, termios->c_cflag);
+ sci_init_pins(port, termios->c_cflag);
+ sci_out(port, SCFCR, (termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0);
sci_out(port, SCSCR, SCSCR_INIT(port));
if ((termios->c_cflag & CREAD) != 0)
- sci_start_rx(port,0);
+ sci_start_rx(port, 0);
}
static const char *sci_type(struct uart_port *port)
{
switch (port->type) {
- case PORT_SCI: return "sci";
- case PORT_SCIF: return "scif";
- case PORT_IRDA: return "irda";
- case PORT_SCIFA: return "scifa";
+ case PORT_IRDA:
+ return "irda";
+ case PORT_SCI:
+ return "sci";
+ case PORT_SCIF:
+ return "scif";
+ case PORT_SCIFA:
+ return "scifa";
}
return NULL;
@@ -1108,19 +982,6 @@ static void sci_config_port(struct uart_port *port, int flags)
port->type = s->type;
- switch (port->type) {
- case PORT_SCI:
- s->init_pins = sci_init_pins_sci;
- break;
- case PORT_SCIF:
- case PORT_SCIFA:
- s->init_pins = sci_init_pins_scif;
- break;
- case PORT_IRDA:
- s->init_pins = sci_init_pins_irda;
- break;
- }
-
if (port->flags & UPF_IOREMAP && !port->membase) {
#if defined(CONFIG_SUPERH64)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
@@ -1129,7 +990,7 @@ static void sci_config_port(struct uart_port *port, int flags)
port->membase = ioremap_nocache(port->mapbase, 0x40);
#endif
- printk(KERN_ERR "sci: can't remap port#%d\n", port->line);
+ dev_err(port->dev, "can't remap port#%d\n", port->line);
}
}
@@ -1163,6 +1024,10 @@ static struct uart_ops sci_uart_ops = {
.request_port = sci_request_port,
.config_port = sci_config_port,
.verify_port = sci_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = sci_poll_get_char,
+ .poll_put_char = sci_poll_put_char,
+#endif
};
static void __init sci_init_ports(void)
@@ -1229,7 +1094,15 @@ int __init early_sci_setup(struct uart_port *port)
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
- put_string(serial_console_port, s, count);
+ struct uart_port *port = &serial_console_port->port;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (*s == 10)
+ sci_poll_put_char(port, '\r');
+
+ sci_poll_put_char(port, *s++);
+ }
}
static int __init serial_console_setup(struct console *co, char *options)
@@ -1307,89 +1180,8 @@ static int __init sci_console_init(void)
console_initcall(sci_console_init);
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
-#ifdef CONFIG_SH_KGDB_CONSOLE
-/*
- * FIXME: Most of this can go away.. at the moment, we rely on
- * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
- * most of that can easily be done here instead.
- *
- * For the time being, just accept the values that were parsed earlier..
- */
-static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
- int *parity, int *bits)
-{
- *baud = kgdb_baud;
- *parity = tolower(kgdb_parity);
- *bits = kgdb_bits - '0';
-}
-
-/*
- * The naming here is somewhat misleading, since kgdb_console_setup() takes
- * care of the early-on initialization for kgdb, regardless of whether we
- * actually use kgdb as a console or not.
- *
- * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
- */
-int __init kgdb_console_setup(struct console *co, char *options)
-{
- struct uart_port *port = &sci_ports[kgdb_portnum].port;
- int baud = 38400;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index != kgdb_portnum)
- co->index = kgdb_portnum;
-
- kgdb_sci_port = &sci_ports[co->index];
- port = &kgdb_sci_port->port;
-
- /*
- * Also need to check port->type, we don't actually have any
- * UPIO_PORT ports, but uart_report_port() handily misreports
- * it anyways if we don't have a port available by the time this is
- * called.
- */
- if (!port->type)
- return -ENODEV;
- if (!port->membase || !port->mapbase)
- return -ENODEV;
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- kgdb_console_get_options(port, &baud, &parity, &bits);
-
- kgdb_getchar = kgdb_sci_getchar;
- kgdb_putchar = kgdb_sci_putchar;
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct console kgdb_console = {
- .name = "ttySC",
- .device = uart_console_device,
- .write = kgdb_console_write,
- .setup = kgdb_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &sci_uart_driver,
-};
-
-/* Register the KGDB console so we get messages (d'oh!) */
-static int __init kgdb_console_init(void)
-{
- sci_init_ports();
- register_console(&kgdb_console);
- return 0;
-}
-console_initcall(kgdb_console_init);
-#endif /* CONFIG_SH_KGDB_CONSOLE */
-
-#if defined(CONFIG_SH_KGDB_CONSOLE)
-#define SCI_CONSOLE &kgdb_console
-#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
-#define SCI_CONSOLE &serial_console
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#define SCI_CONSOLE (&serial_console)
#else
#define SCI_CONSOLE 0
#endif
@@ -1463,15 +1255,8 @@ static int __devinit sci_probe(struct platform_device *dev)
uart_add_one_port(&sci_uart_driver, &sciport->port);
}
-#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
- kgdb_sci_port = &sci_ports[kgdb_portnum];
- kgdb_getchar = kgdb_sci_getchar;
- kgdb_putchar = kgdb_sci_putchar;
-#endif
-
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
- dev_info(&dev->dev, "CPU frequency notifier registered\n");
#endif
#ifdef CONFIG_SH_STANDARD_BIOS
@@ -1491,6 +1276,10 @@ static int __devexit sci_remove(struct platform_device *dev)
{
int i;
+#ifdef CONFIG_HAVE_CLK
+ cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
for (i = 0; i < SCI_NPORTS; i++)
uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 9f33b064172e..38c600c0dbbf 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,13 +133,20 @@
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
# define SCIF_OPER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206) || \
defined(CONFIG_CPU_SUBTYPE_SH7263)
# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
+# if defined(CONFIG_CPU_SUBTYPE_SH7201)
+# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */
+# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */
+# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */
+# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */
+# endif
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
# define SCSPTR0 0xf8400020 /* 16 bit SCIF */
@@ -225,6 +232,10 @@
# define SCIF_TXROOM_MAX 16
#endif
+#ifndef SCIF_ORER
+#define SCIF_ORER 0x0000
+#endif
+
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
@@ -232,12 +243,7 @@
#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
-#else
-# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
-#endif
+#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
@@ -501,18 +507,6 @@ static inline int sci_rxd_in(struct uart_port *port)
{
return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
}
-static inline void set_sh771x_scif_pfc(struct uart_port *port)
-{
- if (port->mapbase == 0xA4400000){
- ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR);
- ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR);
- return;
- }
- if (port->mapbase == 0xA4410000){
- ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR);
- return;
- }
-}
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
static inline int sci_rxd_in(struct uart_port *port)
@@ -664,7 +658,8 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206) || \
defined(CONFIG_CPU_SUBTYPE_SH7263)
static inline int sci_rxd_in(struct uart_port *port)
@@ -677,6 +672,16 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase == 0xfffe9800)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+ if (port->mapbase == 0xfffeA000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfffeA800)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfffeB000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfffeB800)
+ return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+#endif
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7619)