summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpt3sas/mpt3sas_base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_base.c')
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_base.c668
1 files changed, 509 insertions, 159 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index d4f1dcdb8361..11393ebf1a68 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -108,9 +108,12 @@ _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
if (ret)
return ret;
+ /* global ioc spinlock to protect controller list on list operations */
pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug);
+ spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
ioc->fwfault_debug = mpt3sas_fwfault_debug;
+ spin_unlock(&gioc_lock);
return 0;
}
module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug,
@@ -157,7 +160,7 @@ _base_fault_reset_work(struct work_struct *work)
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
- if (ioc->shost_recovery)
+ if (ioc->shost_recovery || ioc->pci_error_recovery)
goto rearm_timer;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
@@ -166,6 +169,20 @@ _base_fault_reset_work(struct work_struct *work)
pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n",
ioc->name);
+ /* It may be possible that EEH recovery can resolve some of
+ * pci bus failure issues rather removing the dead ioc function
+ * by considering controller is in a non-operational state. So
+ * here priority is given to the EEH recovery. If it doesn't
+ * not resolve this issue, mpt3sas driver will consider this
+ * controller to non-operational state and remove the dead ioc
+ * function.
+ */
+ if (ioc->non_operational_loop++ < 5) {
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock,
+ flags);
+ goto rearm_timer;
+ }
+
/*
* Call _scsih_flush_pending_cmds callback so that we flush all
* pending commands back to OS. This call is required to aovid
@@ -181,7 +198,7 @@ _base_fault_reset_work(struct work_struct *work)
ioc->remove_host = 1;
/*Remove the Dead Host */
p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc,
- "mpt3sas_dead_ioc_%d", ioc->id);
+ "%s_dead_ioc_%d", ioc->driver_name, ioc->id);
if (IS_ERR(p))
pr_err(MPT3SAS_FMT
"%s: Running mpt3sas_dead_ioc thread failed !!!!\n",
@@ -193,6 +210,8 @@ _base_fault_reset_work(struct work_struct *work)
return; /* don't rearm timer */
}
+ ioc->non_operational_loop = 0;
+
if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) {
rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
@@ -235,7 +254,8 @@ mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
snprintf(ioc->fault_reset_work_q_name,
- sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+ sizeof(ioc->fault_reset_work_q_name), "poll_%s%d_status",
+ ioc->driver_name, ioc->id);
ioc->fault_reset_work_q =
create_singlethread_workqueue(ioc->fault_reset_work_q_name);
if (!ioc->fault_reset_work_q) {
@@ -324,7 +344,6 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
panic("panic in %s\n", __func__);
}
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
* @ioc: per adapter object
@@ -578,7 +597,8 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
desc = "Device Status Change";
break;
case MPI2_EVENT_IR_OPERATION_STATUS:
- desc = "IR Operation Status";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Operation Status";
break;
case MPI2_EVENT_SAS_DISCOVERY:
{
@@ -609,16 +629,20 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
desc = "SAS Enclosure Device Status Change";
break;
case MPI2_EVENT_IR_VOLUME:
- desc = "IR Volume";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Volume";
break;
case MPI2_EVENT_IR_PHYSICAL_DISK:
- desc = "IR Physical Disk";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Physical Disk";
break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
- desc = "IR Configuration Change List";
+ if (!ioc->hide_ir_msg)
+ desc = "IR Configuration Change List";
break;
case MPI2_EVENT_LOG_ENTRY_ADDED:
- desc = "Log Entry Added";
+ if (!ioc->hide_ir_msg)
+ desc = "Log Entry Added";
break;
case MPI2_EVENT_TEMP_THRESHOLD:
desc = "Temperature Threshold";
@@ -630,7 +654,6 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc);
}
-#endif
/**
* _base_sas_log_info - verbose translation of firmware log info
@@ -675,7 +698,10 @@ _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info)
originator_str = "PL";
break;
case 2:
- originator_str = "IR";
+ if (!ioc->hide_ir_msg)
+ originator_str = "IR";
+ else
+ originator_str = "WarpDrive";
break;
}
@@ -710,13 +736,13 @@ _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
return;
}
ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
(ioc->logging_level & MPT_DEBUG_REPLY)) {
_base_sas_ioc_info(ioc , mpi_reply,
mpt3sas_base_get_msg_frame(ioc, smid));
}
-#endif
+
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
loginfo = le32_to_cpu(mpi_reply->IOCLogInfo);
_base_sas_log_info(ioc, loginfo);
@@ -783,9 +809,9 @@ _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
return 1;
if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
return 1;
-#ifdef CONFIG_SCSI_MPT3SAS_LOGGING
+
_base_display_event_data(ioc, mpi_reply);
-#endif
+
if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
goto out;
smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx);
@@ -1009,6 +1035,12 @@ _base_interrupt(int irq, void *bus_id)
}
wmb();
+ if (ioc->is_warpdrive) {
+ writel(reply_q->reply_post_host_index,
+ ioc->reply_post_host_index[msix_index]);
+ atomic_dec(&reply_q->busy);
+ return IRQ_HANDLED;
+ }
/* Update Reply Post Host Index.
* For those HBA's which support combined reply queue feature
@@ -1320,6 +1352,149 @@ _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr)
}
/**
+ * _base_build_sg_scmd - main sg creation routine
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd, u16 smid)
+{
+ Mpi2SCSIIORequest_t *mpi_request;
+ dma_addr_t chain_dma;
+ struct scatterlist *sg_scmd;
+ void *sg_local, *chain;
+ u32 chain_offset;
+ u32 chain_length;
+ u32 chain_flags;
+ int sges_left;
+ u32 sges_in_segment;
+ u32 sgl_flags;
+ u32 sgl_flags_last_element;
+ u32 sgl_flags_end_buffer;
+ struct chain_tracker *chain_req;
+
+ mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
+
+ /* init scatter gather flags */
+ sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
+ sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (sges_left < 0) {
+ sdev_printk(KERN_ERR, scmd->device,
+ "pci_map_sg failed: request for %d bytes!\n",
+ scsi_bufflen(scmd));
+ return -ENOMEM;
+ }
+
+ sg_local = &mpi_request->SGL;
+ sges_in_segment = ioc->max_sges_in_main_message;
+ if (sges_left <= sges_in_segment)
+ goto fill_in_last_segment;
+
+ mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
+ (sges_in_segment * ioc->sge_size))/4;
+
+ /* fill in main message segment when there is a chain following */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element | sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ /* initializing the chain flags and pointers */
+ chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
+ chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ do {
+ sges_in_segment = (sges_left <=
+ ioc->max_sges_in_chain_message) ? sges_left :
+ ioc->max_sges_in_chain_message;
+ chain_offset = (sges_left == sges_in_segment) ?
+ 0 : (sges_in_segment * ioc->sge_size)/4;
+ chain_length = sges_in_segment * ioc->sge_size;
+ if (chain_offset) {
+ chain_offset = chain_offset <<
+ MPI2_SGE_CHAIN_OFFSET_SHIFT;
+ chain_length += ioc->sge_size;
+ }
+ ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
+ chain_length, chain_dma);
+ sg_local = chain;
+ if (!chain_offset)
+ goto fill_in_last_segment;
+
+ /* fill in chain segments */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ chain_req = _base_get_chain_buffer_tracker(ioc, smid);
+ if (!chain_req)
+ return -1;
+ chain = chain_req->chain_buffer;
+ chain_dma = chain_req->chain_buffer_dma;
+ } while (1);
+
+
+ fill_in_last_segment:
+
+ /* fill the last segment */
+ while (sges_left) {
+ if (sges_left == 1)
+ ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ }
+
+ return 0;
+}
+
+/**
* _base_build_sg_scmd_ieee - main sg creation routine for IEEE format
* @ioc: per adapter object
* @scmd: scsi command
@@ -1571,6 +1746,14 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
int base;
u16 message_control;
+ /* Check whether controller SAS2008 B0 controller,
+ * if it is SAS2008 B0 controller use IO-APIC instead of MSIX
+ */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+ ioc->pdev->revision == SAS2_PCI_DEVICE_B0_REVISION) {
+ return -EINVAL;
+ }
+
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n",
@@ -1579,9 +1762,19 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
}
/* get msix vector count */
-
- pci_read_config_word(ioc->pdev, base + 2, &message_control);
- ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+ /* NUMA_IO not supported for older controllers */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 ||
+ ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2)
+ ioc->msix_vector_count = 1;
+ else {
+ pci_read_config_word(ioc->pdev, base + 2, &message_control);
+ ioc->msix_vector_count = (message_control & 0x3FF) + 1;
+ }
dinitprintk(ioc, pr_info(MPT3SAS_FMT
"msix is supported, vector_count(%d)\n",
ioc->name, ioc->msix_vector_count));
@@ -1643,10 +1836,10 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector)
atomic_set(&reply_q->busy, 0);
if (ioc->msix_enable)
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d",
- MPT3SAS_DRIVER_NAME, ioc->id, index);
+ ioc->driver_name, ioc->id, index);
else
snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d",
- MPT3SAS_DRIVER_NAME, ioc->id);
+ ioc->driver_name, ioc->id);
r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name,
reply_q);
if (r) {
@@ -1872,7 +2065,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
if (pci_request_selected_regions(pdev, ioc->bars,
- MPT3SAS_DRIVER_NAME)) {
+ ioc->driver_name)) {
pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n",
ioc->name);
ioc->bars = 0;
@@ -2158,6 +2351,7 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid)
}
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].scmd = NULL;
+ ioc->scsi_lookup[i].direct_io = 0;
list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -2318,143 +2512,261 @@ mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid)
}
/**
- * _base_display_intel_branding - Display branding string
+ * _base_display_OEMs_branding - Display branding string
* @ioc: per adapter object
*
* Return nothing.
*/
static void
-_base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc)
+_base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc)
{
if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL)
return;
- switch (ioc->pdev->device) {
- case MPI25_MFGPAGE_DEVID_SAS3008:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_INTEL_RMS3JC080_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RMS3JC080_BRANDING);
- break;
-
- case MPT3SAS_INTEL_RS3GC008_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RS3GC008_BRANDING);
- break;
- case MPT3SAS_INTEL_RS3FC044_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RS3FC044_BRANDING);
- break;
- case MPT3SAS_INTEL_RS3UC080_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_INTEL_RS3UC080_BRANDING);
+ switch (ioc->pdev->subsystem_vendor) {
+ case PCI_VENDOR_ID_INTEL:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_INTEL_RMS2LL080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS2LL080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS2LL040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS2LL040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_SSD910_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_SSD910_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI2_MFGPAGE_DEVID_SAS2308_2:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_INTEL_RS25GB008_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RS25GB008_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25JB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25JB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25JB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB080_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25KB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25KB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB040_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB040_BRANDING);
+ break;
+ case MPT2SAS_INTEL_RMS25LB080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_INTEL_RMS25LB080_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_INTEL_RMS3JC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RMS3JC080_BRANDING);
+ break;
+
+ case MPT3SAS_INTEL_RS3GC008_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3GC008_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3FC044_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3FC044_BRANDING);
+ break;
+ case MPT3SAS_INTEL_RS3UC080_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_INTEL_RS3UC080_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
default:
pr_info(MPT3SAS_FMT
- "Intel(R) Controller: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
+ "Intel(R) Controller: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
break;
}
break;
- default:
- pr_info(MPT3SAS_FMT
- "Intel(R) Controller: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
- break;
- }
-}
-
-
-
-/**
- * _base_display_dell_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_dell_branding(struct MPT3SAS_ADAPTER *ioc)
-{
- if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
- return;
-
- switch (ioc->pdev->device) {
- case MPI25_MFGPAGE_DEVID_SAS3008:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_DELL_12G_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_DELL_12G_HBA_BRANDING);
+ case PCI_VENDOR_ID_DELL:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING);
+ break;
+ case MPT2SAS_DELL_PERC_H200_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_PERC_H200_BRANDING);
+ break;
+ case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_DELL_6GBPS_SAS_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Dell 6Gbps HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ break;
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_DELL_12G_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_DELL_12G_HBA_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Dell 12Gbps HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
default:
pr_info(MPT3SAS_FMT
- "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
+ "Dell HBA: Subsystem ID: 0x%X\n", ioc->name,
ioc->pdev->subsystem_device);
break;
}
break;
- default:
- pr_info(MPT3SAS_FMT
- "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name,
- ioc->pdev->subsystem_device);
- break;
- }
-}
-
-/**
- * _base_display_cisco_branding - Display branding string
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc)
-{
- if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_CISCO)
- return;
-
- switch (ioc->pdev->device) {
- case MPI25_MFGPAGE_DEVID_SAS3008:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
- break;
- case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+ case PCI_VENDOR_ID_CISCO:
+ switch (ioc->pdev->device) {
+ case MPI25_MFGPAGE_DEVID_SAS3008:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_CISCO_12G_8E_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_8E_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_8I_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_8I_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
- case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ case MPI25_MFGPAGE_DEVID_SAS3108_1:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
+ break;
+ case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING
+ );
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
break;
default:
pr_info(MPT3SAS_FMT
- "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
+ "Cisco SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
break;
}
break;
- case MPI25_MFGPAGE_DEVID_SAS3108_1:
- switch (ioc->pdev->subsystem_device) {
- case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING);
- break;
- case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID:
- pr_info(MPT3SAS_FMT "%s\n", ioc->name,
- MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING);
- break;
+ case MPT2SAS_HP_3PAR_SSVID:
+ switch (ioc->pdev->device) {
+ case MPI2_MFGPAGE_DEVID_SAS2004:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
+ case MPI2_MFGPAGE_DEVID_SAS2308_2:
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_HP_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_2_4_INTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_2_4_EXTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_2_4_EXTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING);
+ break;
+ case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID:
+ pr_info(MPT3SAS_FMT "%s\n", ioc->name,
+ MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING);
+ break;
+ default:
+ pr_info(MPT3SAS_FMT
+ "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
+ break;
+ }
default:
pr_info(MPT3SAS_FMT
- "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
+ "HP SAS HBA: Subsystem ID: 0x%X\n",
+ ioc->name, ioc->pdev->subsystem_device);
break;
}
- break;
default:
- pr_info(MPT3SAS_FMT
- "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
- ioc->name, ioc->pdev->subsystem_device);
break;
}
}
@@ -2488,9 +2800,7 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
(bios_version & 0x0000FF00) >> 8,
bios_version & 0x000000FF);
- _base_display_intel_branding(ioc);
- _base_display_dell_branding(ioc);
- _base_display_cisco_branding(ioc);
+ _base_display_OEMs_branding(ioc);
pr_info(MPT3SAS_FMT "Protocol=(", ioc->name);
@@ -2508,10 +2818,12 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc)
pr_info("), ");
pr_info("Capabilities=(");
- if (ioc->facts.IOCCapabilities &
+ if (!ioc->hide_ir_msg) {
+ if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
pr_info("Raid");
i++;
+ }
}
if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
@@ -2852,18 +3164,22 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
/* command line tunables for max sgl entries */
if (max_sgl_entries != -1)
sg_tablesize = max_sgl_entries;
- else
- sg_tablesize = MPT3SAS_SG_DEPTH;
+ else {
+ if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
+ sg_tablesize = MPT2SAS_SG_DEPTH;
+ else
+ sg_tablesize = MPT3SAS_SG_DEPTH;
+ }
- if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS)
- sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS;
- else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) {
+ if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS)
+ sg_tablesize = MPT_MIN_PHYS_SEGMENTS;
+ else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) {
sg_tablesize = min_t(unsigned short, sg_tablesize,
SCSI_MAX_SG_CHAIN_SEGMENTS);
pr_warn(MPT3SAS_FMT
"sg_tablesize(%u) is bigger than kernel"
" defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name,
- sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS);
+ sg_tablesize, MPT_MAX_PHYS_SEGMENTS);
}
ioc->shost->sg_tablesize = sg_tablesize;
@@ -4021,7 +4337,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
mpi_request.VF_ID = 0; /* TODO */
mpi_request.VP_ID = 0;
- mpi_request.MsgVersion = cpu_to_le16(MPI25_VERSION);
+ mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged);
mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
if (_base_is_controller_msix_enabled(ioc))
@@ -4655,6 +4971,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
u32 reply_address;
u16 smid;
struct _tr_list *delayed_tr, *delayed_tr_next;
+ u8 hide_flag;
struct adapter_reply_queue *reply_q;
long reply_post_free;
u32 reply_post_free_sz, index = 0;
@@ -4685,6 +5002,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].smid = smid;
ioc->scsi_lookup[i].scmd = NULL;
+ ioc->scsi_lookup[i].direct_io = 0;
list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
}
@@ -4787,6 +5105,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag)
if (ioc->is_driver_loading) {
+
+ if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier
+ == 0x80) {
+ hide_flag = (u8) (
+ le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) &
+ MFG_PAGE10_HIDE_SSDS_MASK);
+ if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK)
+ ioc->mfg_pg10_hide_flag = hide_flag;
+ }
+
ioc->wait_for_discovery_to_complete =
_base_determine_wait_on_discovery(ioc);
@@ -4812,6 +5140,8 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
__func__));
+ /* synchronizing freeing resource with pci_access_mutex lock */
+ mutex_lock(&ioc->pci_access_mutex);
if (ioc->chip_phys && ioc->chip) {
_base_mask_interrupts(ioc);
ioc->shost_recovery = 1;
@@ -4820,6 +5150,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
}
mpt3sas_base_unmap_resources(ioc);
+ mutex_unlock(&ioc->pci_access_mutex);
return;
}
@@ -4834,7 +5165,6 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
{
int r, i;
int cpu_id, last_cpu_id = 0;
- u8 revision;
dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name,
__func__));
@@ -4854,19 +5184,16 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
goto out_free_resources;
}
- /* Check whether the controller revision is C0 or above.
- * only C0 and above revision controllers support 96 MSI-X vectors.
- */
- revision = ioc->pdev->revision;
-
- if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 ||
- ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) &&
- (revision >= 0x02))
- ioc->msix96_vector = 1;
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
+ sizeof(resource_size_t *), GFP_KERNEL);
+ if (!ioc->reply_post_host_index) {
+ dfailprintk(ioc, pr_info(MPT3SAS_FMT "allocation "
+ "for cpu_msix_table failed!!!\n", ioc->name));
+ r = -ENOMEM;
+ goto out_free_resources;
+ }
+ }
ioc->rdpq_array_enable_assigned = 0;
ioc->dma_mask = 0;
@@ -4874,23 +5201,41 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
if (r)
goto out_free_resources;
+ if (ioc->is_warpdrive) {
+ ioc->reply_post_host_index[0] = (resource_size_t __iomem *)
+ &ioc->chip->ReplyPostHostIndex;
+
+ for (i = 1; i < ioc->cpu_msix_table_sz; i++)
+ ioc->reply_post_host_index[i] =
+ (resource_size_t __iomem *)
+ ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1)
+ * 4)));
+ }
pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_get_ioc_facts(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
- /*
- * In SAS3.0,
- * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
- * Target Status - all require the IEEE formated scatter gather
- * elements.
- */
-
- ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
- ioc->build_sg = &_base_build_sg_ieee;
- ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
- ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+ switch (ioc->hba_mpi_version_belonged) {
+ case MPI2_VERSION:
+ ioc->build_sg_scmd = &_base_build_sg_scmd;
+ ioc->build_sg = &_base_build_sg;
+ ioc->build_zero_len_sge = &_base_build_zero_len_sge;
+ break;
+ case MPI25_VERSION:
+ /*
+ * In SAS3.0,
+ * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and
+ * Target Status - all require the IEEE formated scatter gather
+ * elements.
+ */
+ ioc->build_sg_scmd = &_base_build_sg_scmd_ieee;
+ ioc->build_sg = &_base_build_sg_ieee;
+ ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee;
+ ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t);
+ break;
+ }
/*
* These function pointers for other requests that don't
@@ -5006,6 +5351,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
if (r)
goto out_free_resources;
+ ioc->non_operational_loop = 0;
return 0;
out_free_resources:
@@ -5016,6 +5362,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
kfree(ioc->blocking_handles);
kfree(ioc->tm_cmds.reply);
@@ -5055,6 +5403,8 @@ mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc)
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->cpu_msix_table);
+ if (ioc->is_warpdrive)
+ kfree(ioc->reply_post_host_index);
kfree(ioc->pd_handles);
kfree(ioc->blocking_handles);
kfree(ioc->pfacts);