summaryrefslogtreecommitdiff
path: root/drivers/regulator/max1586.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/max1586.c')
-rw-r--r--drivers/regulator/max1586.c108
1 files changed, 30 insertions, 78 deletions
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index b9444ee08da9..f67af3c1b963 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -48,6 +48,14 @@ struct max1586_data {
};
/*
+ * V6 voltage
+ * On I2C bus, sending a "x" byte to the max1586 means :
+ * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
+ * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
+ */
+static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
+
+/*
* V3 voltage
* On I2C bus, sending a "x" byte to the max1586 means :
* set V3 to 0.700V + (x & 0x1f) * 0.025V
@@ -55,113 +63,49 @@ struct max1586_data {
* R24 and R25=100kOhm as described in the data sheet.
* The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
*/
-static int max1586_v3_calc_voltage(struct max1586_data *max1586,
- unsigned selector)
-{
- unsigned range_uV = max1586->max_uV - max1586->min_uV;
-
- return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
-}
-
-static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV,
- unsigned *selector)
+static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max1586_data *max1586 = rdev_get_drvdata(rdev);
struct i2c_client *client = max1586->client;
- unsigned range_uV = max1586->max_uV - max1586->min_uV;
u8 v3_prog;
- if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
- return -EINVAL;
- if (min_uV < max1586->min_uV)
- min_uV = max1586->min_uV;
-
- *selector = DIV_ROUND_UP((min_uV - max1586->min_uV) *
- MAX1586_V3_MAX_VSEL, range_uV);
- if (max1586_v3_calc_voltage(max1586, *selector) > max_uV)
- return -EINVAL;
-
dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
- max1586_v3_calc_voltage(max1586, *selector) / 1000);
+ regulator_list_voltage_linear(rdev, selector) / 1000);
- v3_prog = I2C_V3_SELECT | (u8) *selector;
+ v3_prog = I2C_V3_SELECT | (u8) selector;
return i2c_smbus_write_byte(client, v3_prog);
}
-static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
-{
- struct max1586_data *max1586 = rdev_get_drvdata(rdev);
-
- if (selector > MAX1586_V3_MAX_VSEL)
- return -EINVAL;
- return max1586_v3_calc_voltage(max1586, selector);
-}
-
-/*
- * V6 voltage
- * On I2C bus, sending a "x" byte to the max1586 means :
- * set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
- * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
- */
-static int max1586_v6_calc_voltage(unsigned selector)
-{
- static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
-
- return voltages_uv[selector];
-}
-
-static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV,
- unsigned int *selector)
+static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector)
{
struct i2c_client *client = rdev_get_drvdata(rdev);
u8 v6_prog;
- if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
- return -EINVAL;
- if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
- return -EINVAL;
-
- if (min_uV < 1800000)
- *selector = 0;
- else if (min_uV < 2500000)
- *selector = 1;
- else if (min_uV < 3000000)
- *selector = 2;
- else if (min_uV >= 3000000)
- *selector = 3;
-
- if (max1586_v6_calc_voltage(*selector) > max_uV)
- return -EINVAL;
-
dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
- max1586_v6_calc_voltage(*selector) / 1000);
+ rdev->desc->volt_table[selector] / 1000);
- v6_prog = I2C_V6_SELECT | (u8) *selector;
+ v6_prog = I2C_V6_SELECT | (u8) selector;
return i2c_smbus_write_byte(client, v6_prog);
}
-static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
-{
- if (selector > MAX1586_V6_MAX_VSEL)
- return -EINVAL;
- return max1586_v6_calc_voltage(selector);
-}
-
/*
* The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
* the set up value.
*/
static struct regulator_ops max1586_v3_ops = {
- .set_voltage = max1586_v3_set,
- .list_voltage = max1586_v3_list,
+ .set_voltage_sel = max1586_v3_set_voltage_sel,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
};
static struct regulator_ops max1586_v6_ops = {
- .set_voltage = max1586_v6_set,
- .list_voltage = max1586_v6_list,
+ .set_voltage_sel = max1586_v6_set_voltage_sel,
+ .list_voltage = regulator_list_voltage_table,
};
-static const struct regulator_desc max1586_reg[] = {
+static struct regulator_desc max1586_reg[] = {
{
.name = "Output_V3",
.id = MAX1586_V3,
@@ -176,6 +120,7 @@ static const struct regulator_desc max1586_reg[] = {
.ops = &max1586_v6_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX1586_V6_MAX_VSEL + 1,
+ .volt_table = v6_voltages_uv,
.owner = THIS_MODULE,
},
};
@@ -213,6 +158,13 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
goto err;
}
+ if (id == MAX1586_V3) {
+ max1586_reg[id].min_uV = max1586->min_uV;
+ max1586_reg[id].uV_step =
+ (max1586->max_uV - max1586->min_uV) /
+ MAX1586_V3_MAX_VSEL;
+ }
+
config.dev = &client->dev;
config.init_data = pdata->subdevs[i].platform_data;
config.driver_data = max1586;