diff options
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r-- | drivers/pci/pci.c | 311 |
1 files changed, 250 insertions, 61 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c12f6c790698..16fd0d4c3166 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -20,9 +20,11 @@ #include <linux/pm_wakeup.h> #include <linux/interrupt.h> #include <asm/dma.h> /* isa_dma_bridge_buggy */ +#include <linux/device.h> +#include <asm/setup.h> #include "pci.h" -unsigned int pci_pm_d3_delay = 10; +unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -434,12 +436,15 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device already is in the requested state. * 0 if device's power state has been successfully changed. */ -static int -pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) +static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) { u16 pmcsr; bool need_restore = false; + /* Check if we're already there */ + if (dev->current_state == state) + return 0; + if (!dev->pm_cap) return -EIO; @@ -450,10 +455,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) * Can enter D0 from any state, but if we can only go deeper * to sleep if we're already in a low power state */ - if (dev->current_state == state) { - /* we're already there */ - return 0; - } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold + if (state != PCI_D0 && dev->current_state <= PCI_D3cold && dev->current_state > state) { dev_err(&dev->dev, "invalid power transition " "(from state %d to %d)\n", dev->current_state, state); @@ -496,7 +498,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) if (state == PCI_D3hot || dev->current_state == PCI_D3hot) msleep(pci_pm_d3_delay); else if (state == PCI_D2 || dev->current_state == PCI_D2) - udelay(200); + udelay(PCI_PM_D2_DELAY); dev->current_state = state; @@ -540,11 +542,58 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state) } /** + * pci_platform_power_transition - Use platform to change device power state + * @dev: PCI device to handle. + * @state: State to put the device into. + */ +static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) +{ + int error; + + if (platform_pci_power_manageable(dev)) { + error = platform_pci_set_power_state(dev, state); + if (!error) + pci_update_current_state(dev, state); + } else { + error = -ENODEV; + /* Fall back to PCI_D0 if native PM is not supported */ + pci_update_current_state(dev, PCI_D0); + } + + return error; +} + +/** + * __pci_start_power_transition - Start power transition of a PCI device + * @dev: PCI device to handle. + * @state: State to put the device into. + */ +static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) +{ + if (state == PCI_D0) + pci_platform_power_transition(dev, PCI_D0); +} + +/** + * __pci_complete_power_transition - Complete power transition of a PCI device + * @dev: PCI device to handle. + * @state: State to put the device into. + * + * This function should not be called directly by device drivers. + */ +int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state) +{ + return state > PCI_D0 ? + pci_platform_power_transition(dev, state) : -EINVAL; +} +EXPORT_SYMBOL_GPL(__pci_complete_power_transition); + +/** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * - * Transition a device to a new power state, using the platform formware and/or + * Transition a device to a new power state, using the platform firmware and/or * the device's PCI PM registers. * * RETURN VALUE: @@ -571,15 +620,12 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ return 0; - if (state == PCI_D0 && platform_pci_power_manageable(dev)) { - /* - * Allow the platform to change the state, for example via ACPI - * _PR0, _PS0 and some such, but do not trust it. - */ - int ret = platform_pci_set_power_state(dev, PCI_D0); - if (!ret) - pci_update_current_state(dev, PCI_D0); - } + /* Check if we're already there */ + if (dev->current_state == state) + return 0; + + __pci_start_power_transition(dev, state); + /* This device is quirked not to be put into D3, so don't put it in D3 */ if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) @@ -587,14 +633,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) error = pci_raw_set_power_state(dev, state); - if (state > PCI_D0 && platform_pci_power_manageable(dev)) { - /* Allow the platform to finalize the transition */ - int ret = platform_pci_set_power_state(dev, state); - if (!ret) { - pci_update_current_state(dev, state); - error = 0; - } - } + if (!__pci_complete_power_transition(dev, state)) + error = 0; return error; } @@ -639,6 +679,8 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) EXPORT_SYMBOL(pci_choose_state); +#define PCI_EXP_SAVE_REGS 7 + static int pci_save_pcie_state(struct pci_dev *dev) { int pos, i = 0; @@ -651,7 +693,7 @@ static int pci_save_pcie_state(struct pci_dev *dev) save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP); if (!save_state) { - dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__); + dev_err(&dev->dev, "buffer not found in %s\n", __func__); return -ENOMEM; } cap = (u16 *)&save_state->data[0]; @@ -660,6 +702,9 @@ static int pci_save_pcie_state(struct pci_dev *dev) pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]); pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]); pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]); + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]); + pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]); + pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]); return 0; } @@ -680,6 +725,9 @@ static void pci_restore_pcie_state(struct pci_dev *dev) pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]); pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]); pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]); + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]); + pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]); + pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]); } @@ -694,7 +742,7 @@ static int pci_save_pcix_state(struct pci_dev *dev) save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX); if (!save_state) { - dev_err(&dev->dev, "buffer not found in %s\n", __FUNCTION__); + dev_err(&dev->dev, "buffer not found in %s\n", __func__); return -ENOMEM; } @@ -730,6 +778,7 @@ pci_save_state(struct pci_dev *dev) /* XXX: 100% dword access ok here? */ for (i = 0; i < 16; i++) pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]); + dev->state_saved = true; if ((i = pci_save_pcie_state(dev)) != 0) return i; if ((i = pci_save_pcix_state(dev)) != 0) @@ -766,6 +815,7 @@ pci_restore_state(struct pci_dev *dev) } pci_restore_pcix_state(dev); pci_restore_msi_state(dev); + pci_restore_iov_state(dev); return 0; } @@ -794,7 +844,7 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars) */ int pci_reenable_device(struct pci_dev *dev) { - if (atomic_read(&dev->enable_cnt)) + if (pci_is_enabled(dev)) return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1); return 0; } @@ -992,7 +1042,7 @@ static void do_pci_disable_device(struct pci_dev *dev) */ void pci_disable_enabled_device(struct pci_dev *dev) { - if (atomic_read(&dev->enable_cnt)) + if (pci_is_enabled(dev)) do_pci_disable_device(dev); } @@ -1224,7 +1274,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev) if (target_state == PCI_POWER_ERROR) return -EIO; - pci_enable_wake(dev, target_state, true); + pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev)); error = pci_set_power_state(dev, target_state); @@ -1260,15 +1310,14 @@ void pci_pm_init(struct pci_dev *dev) /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); if (!pm) - goto Exit; - + return; /* Check device's ability to generate PME# */ pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", pmc & PCI_PM_CAP_VER_MASK); - goto Exit; + return; } dev->pm_cap = pm; @@ -1307,9 +1356,6 @@ void pci_pm_init(struct pci_dev *dev) } else { dev->pme_support = 0; } - - Exit: - pci_update_current_state(dev, PCI_D0); } /** @@ -1366,7 +1412,8 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) { int error; - error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP, 4 * sizeof(u16)); + error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP, + PCI_EXP_SAVE_REGS * sizeof(u16)); if (error) dev_err(&dev->dev, "unable to preallocate PCI Express save buffer\n"); @@ -1437,7 +1484,7 @@ pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge) if (!pin) return -1; - while (dev->bus->self) { + while (dev->bus->parent) { pin = pci_swizzle_interrupt_pin(dev, pin); dev = dev->bus->self; } @@ -1457,7 +1504,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp) { u8 pin = *pinp; - while (dev->bus->self) { + while (dev->bus->parent) { pin = pci_swizzle_interrupt_pin(dev, pin); dev = dev->bus->self; } @@ -1493,16 +1540,21 @@ void pci_release_region(struct pci_dev *pdev, int bar) } /** - * pci_request_region - Reserved PCI I/O and memory resource + * __pci_request_region - Reserved PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved * @res_name: Name to be associated with resource. + * @exclusive: whether the region access is exclusive or not * * Mark the PCI region associated with PCI device @pdev BR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. * + * If @exclusive is set, then the region is marked so that userspace + * is explicitly not allowed to map the resource via /dev/mem or + * sysfs MMIO access. + * * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. */ @@ -1541,12 +1593,12 @@ err_out: } /** - * pci_request_region - Reserved PCI I/O and memory resource + * pci_request_region - Reserve PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved - * @res_name: Name to be associated with resource. + * @res_name: Name to be associated with resource * - * Mark the PCI region associated with PCI device @pdev BR @bar as + * Mark the PCI region associated with PCI device @pdev BAR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. @@ -1976,18 +2028,24 @@ static int __pcie_flr(struct pci_dev *dev, int probe) pci_block_user_cfg_access(dev); /* Wait for Transaction Pending bit clean */ + pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); + if (!(status & PCI_EXP_DEVSTA_TRPND)) + goto transaction_done; + msleep(100); pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); - if (status & PCI_EXP_DEVSTA_TRPND) { - dev_info(&dev->dev, "Busy after 100ms while trying to reset; " + if (!(status & PCI_EXP_DEVSTA_TRPND)) + goto transaction_done; + + dev_info(&dev->dev, "Busy after 100ms while trying to reset; " "sleeping for 1 second\n"); - ssleep(1); - pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); - if (status & PCI_EXP_DEVSTA_TRPND) - dev_info(&dev->dev, "Still busy after 1s; " + ssleep(1); + pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); + if (status & PCI_EXP_DEVSTA_TRPND) + dev_info(&dev->dev, "Still busy after 1s; " "proceeding with reset anyway\n"); - } +transaction_done: pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); mdelay(100); @@ -2014,18 +2072,24 @@ static int __pci_af_flr(struct pci_dev *dev, int probe) pci_block_user_cfg_access(dev); /* Wait for Transaction Pending bit clean */ + pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status); + if (!(status & PCI_AF_STATUS_TP)) + goto transaction_done; + msleep(100); pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status); - if (status & PCI_AF_STATUS_TP) { - dev_info(&dev->dev, "Busy after 100ms while trying to" - " reset; sleeping for 1 second\n"); - ssleep(1); - pci_read_config_byte(dev, - cappos + PCI_AF_STATUS, &status); - if (status & PCI_AF_STATUS_TP) - dev_info(&dev->dev, "Still busy after 1s; " - "proceeding with reset anyway\n"); - } + if (!(status & PCI_AF_STATUS_TP)) + goto transaction_done; + + dev_info(&dev->dev, "Busy after 100ms while trying to" + " reset; sleeping for 1 second\n"); + ssleep(1); + pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status); + if (status & PCI_AF_STATUS_TP) + dev_info(&dev->dev, "Still busy after 1s; " + "proceeding with reset anyway\n"); + +transaction_done: pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR); mdelay(100); @@ -2294,18 +2358,140 @@ int pci_select_bars(struct pci_dev *dev, unsigned long flags) */ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) { + int reg; + if (resno < PCI_ROM_RESOURCE) { *type = pci_bar_unknown; return PCI_BASE_ADDRESS_0 + 4 * resno; } else if (resno == PCI_ROM_RESOURCE) { *type = pci_bar_mem32; return dev->rom_base_reg; + } else if (resno < PCI_BRIDGE_RESOURCES) { + /* device specific resource */ + reg = pci_iov_resource_bar(dev, resno, type); + if (reg) + return reg; } dev_err(&dev->dev, "BAR: invalid resource #%d\n", resno); return 0; } +#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE +static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0}; +spinlock_t resource_alignment_lock = SPIN_LOCK_UNLOCKED; + +/** + * pci_specified_resource_alignment - get resource alignment specified by user. + * @dev: the PCI device to get + * + * RETURNS: Resource alignment if it is specified. + * Zero if it is not specified. + */ +resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) +{ + int seg, bus, slot, func, align_order, count; + resource_size_t align = 0; + char *p; + + spin_lock(&resource_alignment_lock); + p = resource_alignment_param; + while (*p) { + count = 0; + if (sscanf(p, "%d%n", &align_order, &count) == 1 && + p[count] == '@') { + p += count + 1; + } else { + align_order = -1; + } + if (sscanf(p, "%x:%x:%x.%x%n", + &seg, &bus, &slot, &func, &count) != 4) { + seg = 0; + if (sscanf(p, "%x:%x.%x%n", + &bus, &slot, &func, &count) != 3) { + /* Invalid format */ + printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n", + p); + break; + } + } + p += count; + if (seg == pci_domain_nr(dev->bus) && + bus == dev->bus->number && + slot == PCI_SLOT(dev->devfn) && + func == PCI_FUNC(dev->devfn)) { + if (align_order == -1) { + align = PAGE_SIZE; + } else { + align = 1 << align_order; + } + /* Found */ + break; + } + if (*p != ';' && *p != ',') { + /* End of param or invalid format */ + break; + } + p++; + } + spin_unlock(&resource_alignment_lock); + return align; +} + +/** + * pci_is_reassigndev - check if specified PCI is target device to reassign + * @dev: the PCI device to check + * + * RETURNS: non-zero for PCI device is a target device to reassign, + * or zero is not. + */ +int pci_is_reassigndev(struct pci_dev *dev) +{ + return (pci_specified_resource_alignment(dev) != 0); +} + +ssize_t pci_set_resource_alignment_param(const char *buf, size_t count) +{ + if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1) + count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1; + spin_lock(&resource_alignment_lock); + strncpy(resource_alignment_param, buf, count); + resource_alignment_param[count] = '\0'; + spin_unlock(&resource_alignment_lock); + return count; +} + +ssize_t pci_get_resource_alignment_param(char *buf, size_t size) +{ + size_t count; + spin_lock(&resource_alignment_lock); + count = snprintf(buf, size, "%s", resource_alignment_param); + spin_unlock(&resource_alignment_lock); + return count; +} + +static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf) +{ + return pci_get_resource_alignment_param(buf, PAGE_SIZE); +} + +static ssize_t pci_resource_alignment_store(struct bus_type *bus, + const char *buf, size_t count) +{ + return pci_set_resource_alignment_param(buf, count); +} + +BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show, + pci_resource_alignment_store); + +static int __init pci_resource_alignment_sysfs_init(void) +{ + return bus_create_file(&pci_bus_type, + &bus_attr_resource_alignment); +} + +late_initcall(pci_resource_alignment_sysfs_init); + static void __devinit pci_no_domains(void) { #ifdef CONFIG_PCI_DOMAINS @@ -2354,6 +2540,9 @@ static int __init pci_setup(char *str) pci_cardbus_io_size = memparse(str + 9, &str); } else if (!strncmp(str, "cbmemsize=", 10)) { pci_cardbus_mem_size = memparse(str + 10, &str); + } else if (!strncmp(str, "resource_alignment=", 19)) { + pci_set_resource_alignment_param(str + 19, + strlen(str + 19)); } else { printk(KERN_ERR "PCI: Unknown option `%s'\n", str); |