summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx/wl1271_spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_spi.c')
-rw-r--r--drivers/net/wireless/wl12xx/wl1271_spi.c158
1 files changed, 0 insertions, 158 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 02978a16e732..67a82934f36e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -30,28 +30,6 @@
#include "wl12xx_80211.h"
#include "wl1271_spi.h"
-static int wl1271_translate_addr(struct wl1271 *wl, int addr)
-{
- /*
- * To translate, first check to which window of addresses the
- * particular address belongs. Then subtract the starting address
- * of that window from the address. Then, add offset of the
- * translated region.
- *
- * The translated regions occur next to each other in physical device
- * memory, so just add the sizes of the preceeding address regions to
- * get the offset to the new region.
- *
- * Currently, only the two first regions are addressed, and the
- * assumption is that all addresses will fall into either of those
- * two.
- */
- if ((addr >= wl->part.reg.start) &&
- (addr < wl->part.reg.start + wl->part.reg.size))
- return addr - wl->part.reg.start + wl->part.mem.size;
- else
- return addr - wl->part.mem.start;
-}
void wl1271_spi_reset(struct wl1271 *wl)
{
@@ -133,67 +111,6 @@ void wl1271_spi_init(struct wl1271 *wl)
wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
}
-/* Set the SPI partitions to access the chip addresses
- *
- * To simplify driver code, a fixed (virtual) memory map is defined for
- * register and memory addresses. Because in the chipset, in different stages
- * of operation, those addresses will move around, an address translation
- * mechanism is required.
- *
- * There are four partitions (three memory and one register partition),
- * which are mapped to two different areas of the hardware memory.
- *
- * Virtual address
- * space
- *
- * | |
- * ...+----+--> mem.start
- * Physical address ... | |
- * space ... | | [PART_0]
- * ... | |
- * 00000000 <--+----+... ...+----+--> mem.start + mem.size
- * | | ... | |
- * |MEM | ... | |
- * | | ... | |
- * mem.size <--+----+... | | {unused area)
- * | | ... | |
- * |REG | ... | |
- * mem.size | | ... | |
- * + <--+----+... ...+----+--> reg.start
- * reg.size | | ... | |
- * |MEM2| ... | | [PART_1]
- * | | ... | |
- * ...+----+--> reg.start + reg.size
- * | |
- *
- */
-int wl1271_set_partition(struct wl1271 *wl,
- struct wl1271_partition_set *p)
-{
- /* copy partition info */
- memcpy(&wl->part, p, sizeof(*p));
-
- wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
- p->mem.start, p->mem.size);
- wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
- p->reg.start, p->reg.size);
- wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
- p->mem2.start, p->mem2.size);
- wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
- p->mem3.start, p->mem3.size);
-
- /* write partition info to the chipset */
- wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
- wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
- wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
- wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
- wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
- wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
- wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
-
- return 0;
-}
-
#define WL1271_BUSY_WORD_TIMEOUT 1000
/* FIXME: Check busy words, removed due to SPI bug */
@@ -338,78 +255,3 @@ void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
}
-
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
- bool fixed)
-{
- int physical;
-
- physical = wl1271_translate_addr(wl, addr);
-
- wl1271_spi_raw_read(wl, physical, buf, len, fixed);
-}
-
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
- bool fixed)
-{
- int physical;
-
- physical = wl1271_translate_addr(wl, addr);
-
- wl1271_spi_raw_write(wl, physical, buf, len, fixed);
-}
-
-u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
-{
- return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
-}
-
-void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
-{
- wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
-}
-
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
-{
- /* write address >> 1 + 0x30000 to OCP_POR_CTR */
- addr = (addr >> 1) + 0x30000;
- wl1271_spi_write32(wl, OCP_POR_CTR, addr);
-
- /* write value to OCP_POR_WDATA */
- wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
-
- /* write 1 to OCP_CMD */
- wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
-}
-
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
-{
- u32 val;
- int timeout = OCP_CMD_LOOP;
-
- /* write address >> 1 + 0x30000 to OCP_POR_CTR */
- addr = (addr >> 1) + 0x30000;
- wl1271_spi_write32(wl, OCP_POR_CTR, addr);
-
- /* write 2 to OCP_CMD */
- wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
-
- /* poll for data ready */
- do {
- val = wl1271_spi_read32(wl, OCP_DATA_READ);
- timeout--;
- } while (!(val & OCP_READY_MASK) && timeout);
-
- if (!timeout) {
- wl1271_warning("Top register access timed out.");
- return 0xffff;
- }
-
- /* check data status and return if OK */
- if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
- return val & 0xffff;
- else {
- wl1271_warning("Top register access returned error.");
- return 0xffff;
- }
-}