summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig27
-rw-r--r--drivers/net/phy/Makefile4
-rw-r--r--drivers/net/phy/asix.c63
-rw-r--r--drivers/net/phy/bcm-phy-lib.c6
-rw-r--r--drivers/net/phy/broadcom.c16
-rw-r--r--drivers/net/phy/dp83tc811.c347
-rw-r--r--drivers/net/phy/marvell.c5
-rw-r--r--drivers/net/phy/mdio-bitbang.c9
-rw-r--r--drivers/net/phy/mdio-boardinfo.c5
-rw-r--r--drivers/net/phy/mdio-gpio.c128
-rw-r--r--drivers/net/phy/mdio-mscc-miim.c193
-rw-r--r--drivers/net/phy/mdio_bus.c48
-rw-r--r--drivers/net/phy/micrel.c5
-rw-r--r--drivers/net/phy/microchip.c25
-rw-r--r--drivers/net/phy/microchip_t1.c74
-rw-r--r--drivers/net/phy/phy.c2
-rw-r--r--drivers/net/phy/phy_device.c96
-rw-r--r--drivers/net/phy/phylink.c20
-rw-r--r--drivers/net/phy/realtek.c16
-rw-r--r--drivers/net/phy/sfp-bus.c7
-rw-r--r--drivers/net/phy/sfp.c37
-rw-r--r--drivers/net/phy/smsc.c5
22 files changed, 902 insertions, 236 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index bdfbabb86ee0..343989f9f9d9 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -118,11 +118,18 @@ config MDIO_I2C
config MDIO_MOXART
tristate "MOXA ART MDIO interface support"
- depends on ARCH_MOXART
+ depends on ARCH_MOXART || COMPILE_TEST
help
This driver supports the MDIO interface found in the network
interface units of the MOXA ART SoC
+config MDIO_MSCC_MIIM
+ tristate "Microsemi MIIM interface support"
+ depends on HAS_IOMEM
+ help
+ This driver supports the MIIM (MDIO) interface found in the network
+ switches of the Microsemi SoCs
+
config MDIO_OCTEON
tristate "Octeon and some ThunderX SOCs MDIO buses"
depends on 64BIT
@@ -135,7 +142,7 @@ config MDIO_OCTEON
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
- depends on ARCH_SUNXI
+ depends on ARCH_SUNXI || COMPILE_TEST
help
This driver supports the MDIO interface found in the network
interface units of the Allwinner SoC that have an EMAC (A10,
@@ -218,6 +225,12 @@ config AQUANTIA_PHY
---help---
Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+config ASIX_PHY
+ tristate "Asix PHYs"
+ help
+ Currently supports the Asix Electronics PHY found in the X-Surf 100
+ AX88796B package.
+
config AT803X_PHY
tristate "AT803X PHYs"
---help---
@@ -285,6 +298,11 @@ config DP83822_PHY
---help---
Supports the DP83822 PHY.
+config DP83TC811_PHY
+ tristate "Texas Instruments DP83TC822 PHY"
+ ---help---
+ Supports the DP83TC822 PHY.
+
config DP83848_PHY
tristate "Texas Instruments DP83848 PHY"
---help---
@@ -354,6 +372,11 @@ config MICROCHIP_PHY
help
Supports the LAN88XX PHYs.
+config MICROCHIP_T1_PHY
+ tristate "Microchip T1 PHYs"
+ ---help---
+ Supports the LAN87XX PHYs.
+
config MICROSEMI_PHY
tristate "Microsemi PHYs"
---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 01acbcb2c798..5805c0b7d60e 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
@@ -45,6 +46,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m)
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
+obj-$(CONFIG_ASIX_PHY) += asix.o
obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
@@ -57,6 +59,7 @@ obj-$(CONFIG_CORTINA_PHY) += cortina.o
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_DP83640_PHY) += dp83640.o
obj-$(CONFIG_DP83822_PHY) += dp83822.o
+obj-$(CONFIG_DP83TC811_PHY) += dp83tc811.o
obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
@@ -70,6 +73,7 @@ obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
+obj-$(CONFIG_MICROCHIP_T1_PHY) += microchip_t1.o
obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
diff --git a/drivers/net/phy/asix.c b/drivers/net/phy/asix.c
new file mode 100644
index 000000000000..8ebe7f5484ae
--- /dev/null
+++ b/drivers/net/phy/asix.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for Asix PHYs
+ *
+ * Author: Michael Schmitz <schmitzmic@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#define PHY_ID_ASIX_AX88796B 0x003b1841
+
+MODULE_DESCRIPTION("Asix PHY driver");
+MODULE_AUTHOR("Michael Schmitz <schmitzmic@gmail.com>");
+MODULE_LICENSE("GPL");
+
+/**
+ * asix_soft_reset - software reset the PHY via BMCR_RESET bit
+ * @phydev: target phy_device struct
+ *
+ * Description: Perform a software PHY reset using the standard
+ * BMCR_RESET bit and poll for the reset bit to be cleared.
+ * Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
+ * such as used on the Individual Computers' X-Surf 100 Zorro card.
+ *
+ * Returns: 0 on success, < 0 on failure
+ */
+static int asix_soft_reset(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Asix PHY won't reset unless reset bit toggles */
+ ret = phy_write(phydev, MII_BMCR, 0);
+ if (ret < 0)
+ return ret;
+
+ return genphy_soft_reset(phydev);
+}
+
+static struct phy_driver asix_driver[] = { {
+ .phy_id = PHY_ID_ASIX_AX88796B,
+ .name = "Asix Electronics AX88796B",
+ .phy_id_mask = 0xfffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .soft_reset = asix_soft_reset,
+} };
+
+module_phy_driver(asix_driver);
+
+static struct mdio_device_id __maybe_unused asix_tbl[] = {
+ { PHY_ID_ASIX_AX88796B, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, asix_tbl);
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index d5e0833d69b9..e10e7b54ec4b 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -346,10 +346,6 @@ void bcm_phy_get_strings(struct phy_device *phydev, u8 *data)
}
EXPORT_SYMBOL_GPL(bcm_phy_get_strings);
-#ifndef UINT64_MAX
-#define UINT64_MAX (u64)(~((u64)0))
-#endif
-
/* Caller is supposed to provide appropriate storage for the library code to
* access the shadow copy
*/
@@ -362,7 +358,7 @@ static u64 bcm_phy_get_stat(struct phy_device *phydev, u64 *shadow,
val = phy_read(phydev, stat.reg);
if (val < 0) {
- ret = UINT64_MAX;
+ ret = U64_MAX;
} else {
val >>= stat.shift;
val = val & ((1 << stat.bits) - 1);
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f9c25912eb98..e86ea105c802 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -54,6 +54,8 @@ static int bcm54210e_config_init(struct phy_device *phydev)
static int bcm54612e_config_init(struct phy_device *phydev)
{
+ int reg;
+
/* Clear TX internal delay unless requested. */
if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
(phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
@@ -65,8 +67,6 @@ static int bcm54612e_config_init(struct phy_device *phydev)
/* Clear RX internal delay unless requested. */
if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
(phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
- u16 reg;
-
reg = bcm54xx_auxctl_read(phydev,
MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
/* Disable RXD to RXC delay (default set) */
@@ -77,6 +77,18 @@ static int bcm54612e_config_init(struct phy_device *phydev)
MII_BCM54XX_AUXCTL_MISC_WREN | reg);
}
+ /* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+ if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+ int err;
+
+ reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+ err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+ BCM54612E_LED4_CLK125OUT_EN | reg);
+
+ if (err < 0)
+ return err;
+ }
+
return 0;
}
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
new file mode 100644
index 000000000000..081d99aa3985
--- /dev/null
+++ b/drivers/net/phy/dp83tc811.c
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Texas Instruments DP83TC811 PHY
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ */
+
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DP83TC811_PHY_ID 0x2000a253
+#define DP83811_DEVADDR 0x1f
+
+#define MII_DP83811_SGMII_CTRL 0x09
+#define MII_DP83811_INT_STAT1 0x12
+#define MII_DP83811_INT_STAT2 0x13
+#define MII_DP83811_RESET_CTRL 0x1f
+
+#define DP83811_HW_RESET BIT(15)
+#define DP83811_SW_RESET BIT(14)
+
+/* INT_STAT1 bits */
+#define DP83811_RX_ERR_HF_INT_EN BIT(0)
+#define DP83811_MS_TRAINING_INT_EN BIT(1)
+#define DP83811_ANEG_COMPLETE_INT_EN BIT(2)
+#define DP83811_ESD_EVENT_INT_EN BIT(3)
+#define DP83811_WOL_INT_EN BIT(4)
+#define DP83811_LINK_STAT_INT_EN BIT(5)
+#define DP83811_ENERGY_DET_INT_EN BIT(6)
+#define DP83811_LINK_QUAL_INT_EN BIT(7)
+
+/* INT_STAT2 bits */
+#define DP83811_JABBER_DET_INT_EN BIT(0)
+#define DP83811_POLARITY_INT_EN BIT(1)
+#define DP83811_SLEEP_MODE_INT_EN BIT(2)
+#define DP83811_OVERTEMP_INT_EN BIT(3)
+#define DP83811_OVERVOLTAGE_INT_EN BIT(6)
+#define DP83811_UNDERVOLTAGE_INT_EN BIT(7)
+
+#define MII_DP83811_RXSOP1 0x04a5
+#define MII_DP83811_RXSOP2 0x04a6
+#define MII_DP83811_RXSOP3 0x04a7
+
+/* WoL Registers */
+#define MII_DP83811_WOL_CFG 0x04a0
+#define MII_DP83811_WOL_STAT 0x04a1
+#define MII_DP83811_WOL_DA1 0x04a2
+#define MII_DP83811_WOL_DA2 0x04a3
+#define MII_DP83811_WOL_DA3 0x04a4
+
+/* WoL bits */
+#define DP83811_WOL_MAGIC_EN BIT(0)
+#define DP83811_WOL_SECURE_ON BIT(5)
+#define DP83811_WOL_EN BIT(7)
+#define DP83811_WOL_INDICATION_SEL BIT(8)
+#define DP83811_WOL_CLR_INDICATION BIT(11)
+
+/* SGMII CTRL bits */
+#define DP83811_TDR_AUTO BIT(8)
+#define DP83811_SGMII_EN BIT(12)
+#define DP83811_SGMII_AUTO_NEG_EN BIT(13)
+#define DP83811_SGMII_TX_ERR_DIS BIT(14)
+#define DP83811_SGMII_SOFT_RESET BIT(15)
+
+static int dp83811_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_DP83811_INT_STAT1);
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_DP83811_INT_STAT2);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83811_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ const u8 *mac;
+ u16 value;
+
+ if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+ mac = (const u8 *)ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return -EINVAL;
+
+ /* MAC addresses start with byte 5, but stored in mac[0].
+ * 811 PHYs store bytes 4|5, 2|3, 0|1
+ */
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA1,
+ (mac[1] << 8) | mac[0]);
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA2,
+ (mac[3] << 8) | mac[2]);
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA3,
+ (mac[5] << 8) | mac[4]);
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_WOL_CFG);
+ if (wol->wolopts & WAKE_MAGIC)
+ value |= DP83811_WOL_MAGIC_EN;
+ else
+ value &= ~DP83811_WOL_MAGIC_EN;
+
+ if (wol->wolopts & WAKE_MAGICSECURE) {
+ phy_write_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP1,
+ (wol->sopass[1] << 8) | wol->sopass[0]);
+ phy_write_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP2,
+ (wol->sopass[3] << 8) | wol->sopass[2]);
+ phy_write_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP3,
+ (wol->sopass[5] << 8) | wol->sopass[4]);
+ value |= DP83811_WOL_SECURE_ON;
+ } else {
+ value &= ~DP83811_WOL_SECURE_ON;
+ }
+
+ value |= (DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL |
+ DP83811_WOL_CLR_INDICATION);
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+ value);
+ } else {
+ value = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_WOL_CFG);
+ value &= ~DP83811_WOL_EN;
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+ value);
+ }
+
+ return 0;
+}
+
+static void dp83811_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ u16 sopass_val;
+ int value;
+
+ wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
+ wol->wolopts = 0;
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+ if (value & DP83811_WOL_MAGIC_EN)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (value & DP83811_WOL_SECURE_ON) {
+ sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP1);
+ wol->sopass[0] = (sopass_val & 0xff);
+ wol->sopass[1] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP2);
+ wol->sopass[2] = (sopass_val & 0xff);
+ wol->sopass[3] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP3);
+ wol->sopass[4] = (sopass_val & 0xff);
+ wol->sopass[5] = (sopass_val >> 8);
+
+ wol->wolopts |= WAKE_MAGICSECURE;
+ }
+
+ /* WoL is not enabled so set wolopts to 0 */
+ if (!(value & DP83811_WOL_EN))
+ wol->wolopts = 0;
+}
+
+static int dp83811_config_intr(struct phy_device *phydev)
+{
+ int misr_status, err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ misr_status = phy_read(phydev, MII_DP83811_INT_STAT1);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83811_RX_ERR_HF_INT_EN |
+ DP83811_MS_TRAINING_INT_EN |
+ DP83811_ANEG_COMPLETE_INT_EN |
+ DP83811_ESD_EVENT_INT_EN |
+ DP83811_WOL_INT_EN |
+ DP83811_LINK_STAT_INT_EN |
+ DP83811_ENERGY_DET_INT_EN |
+ DP83811_LINK_QUAL_INT_EN);
+
+ err = phy_write(phydev, MII_DP83811_INT_STAT1, misr_status);
+ if (err < 0)
+ return err;
+
+ misr_status = phy_read(phydev, MII_DP83811_INT_STAT2);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83811_JABBER_DET_INT_EN |
+ DP83811_POLARITY_INT_EN |
+ DP83811_SLEEP_MODE_INT_EN |
+ DP83811_OVERTEMP_INT_EN |
+ DP83811_OVERVOLTAGE_INT_EN |
+ DP83811_UNDERVOLTAGE_INT_EN);
+
+ err = phy_write(phydev, MII_DP83811_INT_STAT2, misr_status);
+
+ } else {
+ err = phy_write(phydev, MII_DP83811_INT_STAT1, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_DP83811_INT_STAT1, 0);
+ }
+
+ return err;
+}
+
+static int dp83811_config_aneg(struct phy_device *phydev)
+{
+ int value, err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (DP83811_SGMII_AUTO_NEG_EN | value));
+ if (err < 0)
+ return err;
+ } else {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (~DP83811_SGMII_AUTO_NEG_EN & value));
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return genphy_config_aneg(phydev);
+}
+
+static int dp83811_config_init(struct phy_device *phydev)
+{
+ int value, err;
+
+ err = genphy_config_init(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
+ if (!(value & DP83811_SGMII_EN)) {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (DP83811_SGMII_EN | value));
+ if (err < 0)
+ return err;
+ } else {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (~DP83811_SGMII_EN & value));
+ if (err < 0)
+ return err;
+ }
+ }
+
+ value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN;
+
+ return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+ value);
+}
+
+static int dp83811_phy_reset(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_DP83811_RESET_CTRL, DP83811_HW_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83811_suspend(struct phy_device *phydev)
+{
+ int value;
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+ if (!(value & DP83811_WOL_EN))
+ genphy_suspend(phydev);
+
+ return 0;
+}
+
+static int dp83811_resume(struct phy_device *phydev)
+{
+ int value;
+
+ genphy_resume(phydev);
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value |
+ DP83811_WOL_CLR_INDICATION);
+
+ return 0;
+}
+
+static struct phy_driver dp83811_driver[] = {
+ {
+ .phy_id = DP83TC811_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83TC811",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = dp83811_config_init,
+ .config_aneg = dp83811_config_aneg,
+ .soft_reset = dp83811_phy_reset,
+ .get_wol = dp83811_get_wol,
+ .set_wol = dp83811_set_wol,
+ .ack_interrupt = dp83811_ack_interrupt,
+ .config_intr = dp83811_config_intr,
+ .suspend = dp83811_suspend,
+ .resume = dp83811_resume,
+ },
+};
+module_phy_driver(dp83811_driver);
+
+static struct mdio_device_id __maybe_unused dp83811_tbl[] = {
+ { DP83TC811_PHY_ID, 0xfffffff0 },
+ { },
+};
+MODULE_DEVICE_TABLE(mdio, dp83811_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83TC811 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 25e2a099b71c..b8f57e9b9379 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1482,9 +1482,6 @@ static void marvell_get_strings(struct phy_device *phydev, u8 *data)
}
}
-#ifndef UINT64_MAX
-#define UINT64_MAX (u64)(~((u64)0))
-#endif
static u64 marvell_get_stat(struct phy_device *phydev, int i)
{
struct marvell_hw_stat stat = marvell_hw_stats[i];
@@ -1494,7 +1491,7 @@ static u64 marvell_get_stat(struct phy_device *phydev, int i)
val = phy_read_paged(phydev, stat.page, stat.reg);
if (val < 0) {
- ret = UINT64_MAX;
+ ret = U64_MAX;
} else {
val = val & ((1 << stat.bits) - 1);
priv->stats[i] += val;
diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
index 403b085f0a89..15352f987bdf 100644
--- a/drivers/net/phy/mdio-bitbang.c
+++ b/drivers/net/phy/mdio-bitbang.c
@@ -205,14 +205,6 @@ static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
return 0;
}
-static int mdiobb_reset(struct mii_bus *bus)
-{
- struct mdiobb_ctrl *ctrl = bus->priv;
- if (ctrl->reset)
- ctrl->reset(bus);
- return 0;
-}
-
struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
{
struct mii_bus *bus;
@@ -225,7 +217,6 @@ struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
bus->read = mdiobb_read;
bus->write = mdiobb_write;
- bus->reset = mdiobb_reset;
bus->priv = ctrl;
return bus;
diff --git a/drivers/net/phy/mdio-boardinfo.c b/drivers/net/phy/mdio-boardinfo.c
index 1861f387820d..863496fa5d13 100644
--- a/drivers/net/phy/mdio-boardinfo.c
+++ b/drivers/net/phy/mdio-boardinfo.c
@@ -30,17 +30,20 @@ void mdiobus_setup_mdiodev_from_board_info(struct mii_bus *bus,
struct mdio_board_info *bi))
{
struct mdio_board_entry *be;
+ struct mdio_board_entry *tmp;
struct mdio_board_info *bi;
int ret;
mutex_lock(&mdio_board_lock);
- list_for_each_entry(be, &mdio_board_list, list) {
+ list_for_each_entry_safe(be, tmp, &mdio_board_list, list) {
bi = &be->board_info;
if (strcmp(bus->id, bi->bus_id))
continue;
+ mutex_unlock(&mdio_board_lock);
ret = cb(bus, bi);
+ mutex_lock(&mdio_board_lock);
if (ret)
continue;
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 4333c6e14742..4e4c8daf44c3 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -24,8 +24,10 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/mdio-bitbang.h>
+#include <linux/mdio-gpio.h>
#include <linux/gpio.h>
-#include <linux/platform_data/mdio-gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_gpio.h>
#include <linux/of_mdio.h>
@@ -35,37 +37,22 @@ struct mdio_gpio_info {
struct gpio_desc *mdc, *mdio, *mdo;
};
-static void *mdio_gpio_of_get_data(struct platform_device *pdev)
+static int mdio_gpio_get_data(struct device *dev,
+ struct mdio_gpio_info *bitbang)
{
- struct device_node *np = pdev->dev.of_node;
- struct mdio_gpio_platform_data *pdata;
- enum of_gpio_flags flags;
- int ret;
-
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return NULL;
-
- ret = of_get_gpio_flags(np, 0, &flags);
- if (ret < 0)
- return NULL;
-
- pdata->mdc = ret;
- pdata->mdc_active_low = flags & OF_GPIO_ACTIVE_LOW;
-
- ret = of_get_gpio_flags(np, 1, &flags);
- if (ret < 0)
- return NULL;
- pdata->mdio = ret;
- pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW;
-
- ret = of_get_gpio_flags(np, 2, &flags);
- if (ret > 0) {
- pdata->mdo = ret;
- pdata->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW;
- }
-
- return pdata;
+ bitbang->mdc = devm_gpiod_get_index(dev, NULL, MDIO_GPIO_MDC,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(bitbang->mdc))
+ return PTR_ERR(bitbang->mdc);
+
+ bitbang->mdio = devm_gpiod_get_index(dev, NULL, MDIO_GPIO_MDIO,
+ GPIOD_IN);
+ if (IS_ERR(bitbang->mdio))
+ return PTR_ERR(bitbang->mdio);
+
+ bitbang->mdo = devm_gpiod_get_index_optional(dev, NULL, MDIO_GPIO_MDO,
+ GPIOD_OUT_LOW);
+ return PTR_ERR_OR_ZERO(bitbang->mdo);
}
static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
@@ -125,78 +112,28 @@ static const struct mdiobb_ops mdio_gpio_ops = {
};
static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
- struct mdio_gpio_platform_data *pdata,
+ struct mdio_gpio_info *bitbang,
int bus_id)
{
struct mii_bus *new_bus;
- struct mdio_gpio_info *bitbang;
- int i;
- int mdc, mdio, mdo;
- unsigned long mdc_flags = GPIOF_OUT_INIT_LOW;
- unsigned long mdio_flags = GPIOF_DIR_IN;
- unsigned long mdo_flags = GPIOF_OUT_INIT_HIGH;
-
- bitbang = devm_kzalloc(dev, sizeof(*bitbang), GFP_KERNEL);
- if (!bitbang)
- goto out;
bitbang->ctrl.ops = &mdio_gpio_ops;
- bitbang->ctrl.reset = pdata->reset;
- mdc = pdata->mdc;
- bitbang->mdc = gpio_to_desc(mdc);
- if (pdata->mdc_active_low)
- mdc_flags = GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW;
- mdio = pdata->mdio;
- bitbang->mdio = gpio_to_desc(mdio);
- if (pdata->mdio_active_low)
- mdio_flags |= GPIOF_ACTIVE_LOW;
- mdo = pdata->mdo;
- if (mdo) {
- bitbang->mdo = gpio_to_desc(mdo);
- if (pdata->mdo_active_low)
- mdo_flags = GPIOF_OUT_INIT_LOW | GPIOF_ACTIVE_LOW;
- }
new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!new_bus)
- goto out;
-
- new_bus->name = "GPIO Bitbanged MDIO",
+ return NULL;
- new_bus->phy_mask = pdata->phy_mask;
- new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask;
- memcpy(new_bus->irq, pdata->irqs, sizeof(new_bus->irq));
+ new_bus->name = "GPIO Bitbanged MDIO";
new_bus->parent = dev;
- if (new_bus->phy_mask == ~0)
- goto out_free_bus;
-
- for (i = 0; i < PHY_MAX_ADDR; i++)
- if (!new_bus->irq[i])
- new_bus->irq[i] = PHY_POLL;
-
if (bus_id != -1)
snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id);
else
strncpy(new_bus->id, "gpio", MII_BUS_ID_SIZE);
- if (devm_gpio_request_one(dev, mdc, mdc_flags, "mdc"))
- goto out_free_bus;
-
- if (devm_gpio_request_one(dev, mdio, mdio_flags, "mdio"))
- goto out_free_bus;
-
- if (mdo && devm_gpio_request_one(dev, mdo, mdo_flags, "mdo"))
- goto out_free_bus;
-
dev_set_drvdata(dev, new_bus);
return new_bus;
-
-out_free_bus:
- free_mdio_bitbang(new_bus);
-out:
- return NULL;
}
static void mdio_gpio_bus_deinit(struct device *dev)
@@ -216,34 +153,33 @@ static void mdio_gpio_bus_destroy(struct device *dev)
static int mdio_gpio_probe(struct platform_device *pdev)
{
- struct mdio_gpio_platform_data *pdata;
+ struct mdio_gpio_info *bitbang;
struct mii_bus *new_bus;
int ret, bus_id;
+ bitbang = devm_kzalloc(&pdev->dev, sizeof(*bitbang), GFP_KERNEL);
+ if (!bitbang)
+ return -ENOMEM;
+
+ ret = mdio_gpio_get_data(&pdev->dev, bitbang);
+ if (ret)
+ return ret;
+
if (pdev->dev.of_node) {
- pdata = mdio_gpio_of_get_data(pdev);
bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio");
if (bus_id < 0) {
dev_warn(&pdev->dev, "failed to get alias id\n");
bus_id = 0;
}
} else {
- pdata = dev_get_platdata(&pdev->dev);
bus_id = pdev->id;
}
- if (!pdata)
- return -ENODEV;
-
- new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id);
+ new_bus = mdio_gpio_bus_init(&pdev->dev, bitbang, bus_id);
if (!new_bus)
return -ENODEV;
- if (pdev->dev.of_node)
- ret = of_mdiobus_register(new_bus, pdev->dev.of_node);
- else
- ret = mdiobus_register(new_bus);
-
+ ret = of_mdiobus_register(new_bus, pdev->dev.of_node);
if (ret)
mdio_gpio_bus_deinit(&pdev->dev);
diff --git a/drivers/net/phy/mdio-mscc-miim.c b/drivers/net/phy/mdio-mscc-miim.c
new file mode 100644
index 000000000000..badbc99bedd3
--- /dev/null
+++ b/drivers/net/phy/mdio-mscc-miim.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Driver for the MDIO interface of Microsemi network switches.
+ *
+ * Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of_mdio.h>
+
+#define MSCC_MIIM_REG_STATUS 0x0
+#define MSCC_MIIM_STATUS_STAT_BUSY BIT(3)
+#define MSCC_MIIM_REG_CMD 0x8
+#define MSCC_MIIM_CMD_OPR_WRITE BIT(1)
+#define MSCC_MIIM_CMD_OPR_READ BIT(2)
+#define MSCC_MIIM_CMD_WRDATA_SHIFT 4
+#define MSCC_MIIM_CMD_REGAD_SHIFT 20
+#define MSCC_MIIM_CMD_PHYAD_SHIFT 25
+#define MSCC_MIIM_CMD_VLD BIT(31)
+#define MSCC_MIIM_REG_DATA 0xC
+#define MSCC_MIIM_DATA_ERROR (BIT(16) | BIT(17))
+
+#define MSCC_PHY_REG_PHY_CFG 0x0
+#define PHY_CFG_PHY_ENA (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+#define PHY_CFG_PHY_COMMON_RESET BIT(4)
+#define PHY_CFG_PHY_RESET (BIT(5) | BIT(6) | BIT(7) | BIT(8))
+#define MSCC_PHY_REG_PHY_STATUS 0x4
+
+struct mscc_miim_dev {
+ void __iomem *regs;
+ void __iomem *phy_regs;
+};
+
+static int mscc_miim_wait_ready(struct mii_bus *bus)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+ u32 val;
+
+ readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
+ !(val & MSCC_MIIM_STATUS_STAT_BUSY), 100, 250000);
+ if (val & MSCC_MIIM_STATUS_STAT_BUSY)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+ u32 val;
+ int ret;
+
+ ret = mscc_miim_wait_ready(bus);
+ if (ret)
+ goto out;
+
+ writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+ (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ,
+ miim->regs + MSCC_MIIM_REG_CMD);
+
+ ret = mscc_miim_wait_ready(bus);
+ if (ret)
+ goto out;
+
+ val = readl(miim->regs + MSCC_MIIM_REG_DATA);
+ if (val & MSCC_MIIM_DATA_ERROR) {
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = val & 0xFFFF;
+out:
+ return ret;
+}
+
+static int mscc_miim_write(struct mii_bus *bus, int mii_id,
+ int regnum, u16 value)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+ int ret;
+
+ ret = mscc_miim_wait_ready(bus);
+ if (ret < 0)
+ goto out;
+
+ writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
+ (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
+ (value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
+ MSCC_MIIM_CMD_OPR_WRITE,
+ miim->regs + MSCC_MIIM_REG_CMD);
+
+out:
+ return ret;
+}
+
+static int mscc_miim_reset(struct mii_bus *bus)
+{
+ struct mscc_miim_dev *miim = bus->priv;
+
+ if (miim->phy_regs) {
+ writel(0, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
+ writel(0x1ff, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
+ mdelay(500);
+ }
+
+ return 0;
+}
+
+static int mscc_miim_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct mii_bus *bus;
+ struct mscc_miim_dev *dev;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*dev));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "mscc_miim";
+ bus->read = mscc_miim_read;
+ bus->write = mscc_miim_write;
+ bus->reset = mscc_miim_reset;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
+ bus->parent = &pdev->dev;
+
+ dev = bus->priv;
+ dev->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dev->regs)) {
+ dev_err(&pdev->dev, "Unable to map MIIM registers\n");
+ return PTR_ERR(dev->regs);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ dev->phy_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dev->phy_regs)) {
+ dev_err(&pdev->dev, "Unable to map internal phy registers\n");
+ return PTR_ERR(dev->phy_regs);
+ }
+ }
+
+ ret = of_mdiobus_register(bus, pdev->dev.of_node);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, bus);
+
+ return 0;
+}
+
+static int mscc_miim_remove(struct platform_device *pdev)
+{
+ struct mii_bus *bus = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(bus);
+
+ return 0;
+}
+
+static const struct of_device_id mscc_miim_match[] = {
+ { .compatible = "mscc,ocelot-miim" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mscc_miim_match);
+
+static struct platform_driver mscc_miim_driver = {
+ .probe = mscc_miim_probe,
+ .remove = mscc_miim_remove,
+ .driver = {
+ .name = "mscc-miim",
+ .of_match_table = mscc_miim_match,
+ },
+};
+
+module_platform_driver(mscc_miim_driver);
+
+MODULE_DESCRIPTION("Microsemi MIIM driver");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
+MODULE_LICENSE("Dual MIT/GPL");
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 24b5511222c8..98f4b1f706df 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -717,58 +717,10 @@ static int mdio_uevent(struct device *dev, struct kobj_uevent_env *env)
return 0;
}
-#ifdef CONFIG_PM
-static int mdio_bus_suspend(struct device *dev)
-{
- struct mdio_device *mdio = to_mdio_device(dev);
-
- if (mdio->pm_ops && mdio->pm_ops->suspend)
- return mdio->pm_ops->suspend(dev);
-
- return 0;
-}
-
-static int mdio_bus_resume(struct device *dev)
-{
- struct mdio_device *mdio = to_mdio_device(dev);
-
- if (mdio->pm_ops && mdio->pm_ops->resume)
- return mdio->pm_ops->resume(dev);
-
- return 0;
-}
-
-static int mdio_bus_restore(struct device *dev)
-{
- struct mdio_device *mdio = to_mdio_device(dev);
-
- if (mdio->pm_ops && mdio->pm_ops->restore)
- return mdio->pm_ops->restore(dev);
-
- return 0;
-}
-
-static const struct dev_pm_ops mdio_bus_pm_ops = {
- .suspend = mdio_bus_suspend,
- .resume = mdio_bus_resume,
- .freeze = mdio_bus_suspend,
- .thaw = mdio_bus_resume,
- .restore = mdio_bus_restore,
-};
-
-#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)
-
-#else
-
-#define MDIO_BUS_PM_OPS NULL
-
-#endif /* CONFIG_PM */
-
struct bus_type mdio_bus_type = {
.name = "mdio_bus",
.match = mdio_bus_match,
.uevent = mdio_uevent,
- .pm = MDIO_BUS_PM_OPS,
};
EXPORT_SYMBOL(mdio_bus_type);
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index ab195f0916d6..3db06b40580d 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -681,9 +681,6 @@ static void kszphy_get_strings(struct phy_device *phydev, u8 *data)
}
}
-#ifndef UINT64_MAX
-#define UINT64_MAX (u64)(~((u64)0))
-#endif
static u64 kszphy_get_stat(struct phy_device *phydev, int i)
{
struct kszphy_hw_stat stat = kszphy_hw_stats[i];
@@ -693,7 +690,7 @@ static u64 kszphy_get_stat(struct phy_device *phydev, int i)
val = phy_read(phydev, stat.reg);
if (val < 0) {
- ret = UINT64_MAX;
+ ret = U64_MAX;
} else {
val = val & ((1 << stat.bits) - 1);
priv->stats[i] += val;
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index a97ac8c12c4c..2d67937866a3 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -21,6 +21,8 @@
#include <linux/phy.h>
#include <linux/microchipphy.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/net/microchip-lan78xx.h>
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
#define DRIVER_DESC "Microchip LAN88XX PHY driver"
@@ -225,6 +227,8 @@ static int lan88xx_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct lan88xx_priv *priv;
+ u32 led_modes[4];
+ int len;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -232,6 +236,27 @@ static int lan88xx_probe(struct phy_device *phydev)
priv->wolopts = 0;
+ len = of_property_read_variable_u32_array(dev->of_node,
+ "microchip,led-modes",
+ led_modes,
+ 0,
+ ARRAY_SIZE(led_modes));
+ if (len >= 0) {
+ u32 reg = 0;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (led_modes[i] > 15)
+ return -EINVAL;
+ reg |= led_modes[i] << (i * 4);
+ }
+ for (; i < ARRAY_SIZE(led_modes); i++)
+ reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
+ (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
+ } else if (len == -EOVERFLOW) {
+ return -EINVAL;
+ }
+
/* these values can be used to identify internal PHY */
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
new file mode 100644
index 000000000000..b1917dd1978a
--- /dev/null
+++ b/drivers/net/phy/microchip_t1.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Microchip Technology
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+/* Interrupt Source Register */
+#define LAN87XX_INTERRUPT_SOURCE (0x18)
+
+/* Interrupt Mask Register */
+#define LAN87XX_INTERRUPT_MASK (0x19)
+#define LAN87XX_MASK_LINK_UP (0x0004)
+#define LAN87XX_MASK_LINK_DOWN (0x0002)
+
+#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
+#define DRIVER_DESC "Microchip LAN87XX T1 PHY driver"
+
+static int lan87xx_phy_config_intr(struct phy_device *phydev)
+{
+ int rc, val = 0;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ /* unmask all source and clear them before enable */
+ rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, 0x7FFF);
+ rc = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE);
+ val = LAN87XX_MASK_LINK_UP | LAN87XX_MASK_LINK_DOWN;
+ }
+
+ rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, val);
+
+ return rc < 0 ? rc : 0;
+}
+
+static int lan87xx_phy_ack_interrupt(struct phy_device *phydev)
+{
+ int rc = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE);
+
+ return rc < 0 ? rc : 0;
+}
+
+static struct phy_driver microchip_t1_phy_driver[] = {
+ {
+ .phy_id = 0x0007c150,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Microchip LAN87xx T1",
+
+ .features = SUPPORTED_100baseT_Full,
+ .flags = PHY_HAS_INTERRUPT,
+
+ .config_init = genphy_config_init,
+ .config_aneg = genphy_config_aneg,
+
+ .ack_interrupt = lan87xx_phy_ack_interrupt,
+ .config_intr = lan87xx_phy_config_intr,
+
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ }
+};
+
+module_phy_driver(microchip_t1_phy_driver);
+
+static struct mdio_device_id __maybe_unused microchip_t1_tbl[] = {
+ { 0x0007c150, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, microchip_t1_tbl);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 05c1e8ef15e6..537297d2b4b4 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -894,7 +894,7 @@ void phy_state_machine(struct work_struct *work)
needs_aneg = true;
break;
case PHY_NOLINK:
- if (phy_interrupt_is_valid(phydev))
+ if (phydev->irq != PHY_POLL)
break;
err = phy_read_status(phydev);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9e4ba8e80a18..bd0f339f69fd 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -346,6 +346,55 @@ static int phy_bus_match(struct device *dev, struct device_driver *drv)
}
}
+static ssize_t
+phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
+}
+static DEVICE_ATTR_RO(phy_id);
+
+static ssize_t
+phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ const char *mode = NULL;
+
+ if (phy_is_internal(phydev))
+ mode = "internal";
+ else
+ mode = phy_modes(phydev->interface);
+
+ return sprintf(buf, "%s\n", mode);
+}
+static DEVICE_ATTR_RO(phy_interface);
+
+static ssize_t
+phy_has_fixups_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+
+ return sprintf(buf, "%d\n", phydev->has_fixups);
+}
+static DEVICE_ATTR_RO(phy_has_fixups);
+
+static struct attribute *phy_dev_attrs[] = {
+ &dev_attr_phy_id.attr,
+ &dev_attr_phy_interface.attr,
+ &dev_attr_phy_has_fixups.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(phy_dev);
+
+static const struct device_type mdio_bus_phy_type = {
+ .name = "PHY",
+ .groups = phy_dev_groups,
+ .release = phy_device_release,
+ .pm = MDIO_BUS_PHY_PM_OPS,
+};
+
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
bool is_c45,
struct phy_c45_device_ids *c45_ids)
@@ -359,11 +408,10 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
return ERR_PTR(-ENOMEM);
mdiodev = &dev->mdio;
- mdiodev->dev.release = phy_device_release;
mdiodev->dev.parent = &bus->dev;
mdiodev->dev.bus = &mdio_bus_type;
+ mdiodev->dev.type = &mdio_bus_phy_type;
mdiodev->bus = bus;
- mdiodev->pm_ops = MDIO_BUS_PHY_PM_OPS;
mdiodev->bus_match = phy_bus_match;
mdiodev->addr = addr;
mdiodev->flags = MDIO_DEVICE_FLAG_PHY;
@@ -587,48 +635,6 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
}
EXPORT_SYMBOL(get_phy_device);
-static ssize_t
-phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct phy_device *phydev = to_phy_device(dev);
-
- return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
-}
-static DEVICE_ATTR_RO(phy_id);
-
-static ssize_t
-phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct phy_device *phydev = to_phy_device(dev);
- const char *mode = NULL;
-
- if (phy_is_internal(phydev))
- mode = "internal";
- else
- mode = phy_modes(phydev->interface);
-
- return sprintf(buf, "%s\n", mode);
-}
-static DEVICE_ATTR_RO(phy_interface);
-
-static ssize_t
-phy_has_fixups_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct phy_device *phydev = to_phy_device(dev);
-
- return sprintf(buf, "%d\n", phydev->has_fixups);
-}
-static DEVICE_ATTR_RO(phy_has_fixups);
-
-static struct attribute *phy_dev_attrs[] = {
- &dev_attr_phy_id.attr,
- &dev_attr_phy_interface.attr,
- &dev_attr_phy_has_fixups.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(phy_dev);
-
/**
* phy_device_register - Register the phy device on the MDIO bus
* @phydev: phy_device structure to be added to the MDIO bus
@@ -651,8 +657,6 @@ int phy_device_register(struct phy_device *phydev)
goto out;
}
- phydev->mdio.dev.groups = phy_dev_groups;
-
err = device_add(&phydev->mdio.dev);
if (err) {
pr_err("PHY %d failed to add\n", phydev->mdio.addr);
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index c582b2d7546c..af4dc4425be2 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -19,6 +19,7 @@
#include <linux/phylink.h>
#include <linux/rtnetlink.h>
#include <linux/spinlock.h>
+#include <linux/timer.h>
#include <linux/workqueue.h>
#include "sfp.h"
@@ -54,6 +55,7 @@ struct phylink {
/* The link configuration settings */
struct phylink_link_state link_config;
struct gpio_desc *link_gpio;
+ struct timer_list link_poll;
void (*get_fixed_state)(struct net_device *dev,
struct phylink_link_state *s);
@@ -360,7 +362,7 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_stat
if (pl->get_fixed_state)
pl->get_fixed_state(pl->netdev, state);
else if (pl->link_gpio)
- state->link = !!gpiod_get_value(pl->link_gpio);
+ state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
}
/* Flow control is resolved according to our and the link partners
@@ -500,6 +502,15 @@ static void phylink_run_resolve(struct phylink *pl)
queue_work(system_power_efficient_wq, &pl->resolve);
}
+static void phylink_fixed_poll(struct timer_list *t)
+{
+ struct phylink *pl = container_of(t, struct phylink, link_poll);
+
+ mod_timer(t, jiffies + HZ);
+
+ phylink_run_resolve(pl);
+}
+
static const struct sfp_upstream_ops sfp_phylink_ops;
static int phylink_register_sfp(struct phylink *pl,
@@ -572,6 +583,7 @@ struct phylink *phylink_create(struct net_device *ndev,
pl->link_config.an_enabled = true;
pl->ops = ops;
__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+ timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
linkmode_copy(pl->link_config.advertising, pl->supported);
@@ -612,6 +624,8 @@ void phylink_destroy(struct phylink *pl)
{
if (pl->sfp_bus)
sfp_unregister_upstream(pl->sfp_bus);
+ if (!IS_ERR_OR_NULL(pl->link_gpio))
+ gpiod_put(pl->link_gpio);
cancel_work_sync(&pl->resolve);
kfree(pl);
@@ -903,6 +917,8 @@ void phylink_start(struct phylink *pl)
clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
phylink_run_resolve(pl);
+ if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
+ mod_timer(&pl->link_poll, jiffies + HZ);
if (pl->sfp_bus)
sfp_upstream_start(pl->sfp_bus);
if (pl->phydev)
@@ -927,6 +943,8 @@ void phylink_stop(struct phylink *pl)
phy_stop(pl->phydev);
if (pl->sfp_bus)
sfp_upstream_stop(pl->sfp_bus);
+ if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
+ del_timer_sync(&pl->link_poll);
set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
queue_work(system_power_efficient_wq, &pl->resolve);
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 9f48ecf9c627..082fb40c656d 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -145,6 +145,20 @@ static int rtl8211f_config_init(struct phy_device *phydev)
return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val);
}
+static int rtl8211b_suspend(struct phy_device *phydev)
+{
+ phy_write(phydev, MII_MMD_DATA, BIT(9));
+
+ return genphy_suspend(phydev);
+}
+
+static int rtl8211b_resume(struct phy_device *phydev)
+{
+ phy_write(phydev, MII_MMD_DATA, 0);
+
+ return genphy_resume(phydev);
+}
+
static struct phy_driver realtek_drvs[] = {
{
.phy_id = 0x00008201,
@@ -174,6 +188,8 @@ static struct phy_driver realtek_drvs[] = {
.config_intr = &rtl8211b_config_intr,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
+ .suspend = rtl8211b_suspend,
+ .resume = rtl8211b_resume,
}, {
.phy_id = 0x001cc914,
.name = "RTL8211DN Gigabit Ethernet",
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index fd6c23f69c2f..d437f4f5ed52 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -132,6 +132,13 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
br_max = br_nom + br_nom * id->ext.br_min / 100;
br_min = br_nom - br_nom * id->ext.br_min / 100;
}
+
+ /* When using passive cables, in case neither BR,min nor BR,max
+ * are specified, set br_min to 0 as the nominal value is then
+ * used as the maximum.
+ */
+ if (br_min == br_max && id->base.sfp_ct_passive)
+ br_min = 0;
}
/* Set ethtool support from the compliance fields. */
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 4ab6e9a50bbe..c4c92db86dfa 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -976,6 +976,7 @@ static int sfp_probe(struct platform_device *pdev)
if (pdev->dev.of_node) {
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *id;
+ struct i2c_adapter *i2c;
struct device_node *np;
id = of_match_node(sfp_of_match, node);
@@ -985,19 +986,20 @@ static int sfp_probe(struct platform_device *pdev)
sff = sfp->type = id->data;
np = of_parse_phandle(node, "i2c-bus", 0);
- if (np) {
- struct i2c_adapter *i2c;
-
- i2c = of_find_i2c_adapter_by_node(np);
- of_node_put(np);
- if (!i2c)
- return -EPROBE_DEFER;
-
- err = sfp_i2c_configure(sfp, i2c);
- if (err < 0) {
- i2c_put_adapter(i2c);
- return err;
- }
+ if (!np) {
+ dev_err(sfp->dev, "missing 'i2c-bus' property\n");
+ return -ENODEV;
+ }
+
+ i2c = of_find_i2c_adapter_by_node(np);
+ of_node_put(np);
+ if (!i2c)
+ return -EPROBE_DEFER;
+
+ err = sfp_i2c_configure(sfp, i2c);
+ if (err < 0) {
+ i2c_put_adapter(i2c);
+ return err;
}
}
@@ -1065,6 +1067,15 @@ static int sfp_probe(struct platform_device *pdev)
if (poll)
mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
+ /* We could have an issue in cases no Tx disable pin is available or
+ * wired as modules using a laser as their light source will continue to
+ * be active when the fiber is removed. This could be a safety issue and
+ * we should at least warn the user about that.
+ */
+ if (!sfp->gpio[GPIO_TX_DISABLE])
+ dev_warn(sfp->dev,
+ "No tx_disable pin: SFP modules will always be emitting.\n");
+
return 0;
}
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index be399d645224..c328208388da 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -168,9 +168,6 @@ static void smsc_get_strings(struct phy_device *phydev, u8 *data)
}
}
-#ifndef UINT64_MAX
-#define UINT64_MAX (u64)(~((u64)0))
-#endif
static u64 smsc_get_stat(struct phy_device *phydev, int i)
{
struct smsc_hw_stat stat = smsc_hw_stats[i];
@@ -179,7 +176,7 @@ static u64 smsc_get_stat(struct phy_device *phydev, int i)
val = phy_read(phydev, stat.reg);
if (val < 0)
- ret = UINT64_MAX;
+ ret = U64_MAX;
else
ret = val;