summaryrefslogtreecommitdiff
path: root/drivers/net/pcmcia/3c574_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/pcmcia/3c574_cs.c')
-rw-r--r--drivers/net/pcmcia/3c574_cs.c125
1 files changed, 42 insertions, 83 deletions
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index c683f77c6f42..321b12f82645 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -62,13 +62,15 @@ invalid ramWidth is Very Bad.
V. References
http://www.scyld.com/expert/NWay.html
-http://www.national.com/pf/DP/DP83840.html
+http://www.national.com/opf/DP/DP83840A.html
Thanks to Terry Murphy of 3Com for providing development information for
earlier 3Com products.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -83,11 +85,9 @@ earlier 3Com products.
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
-#include <linux/ethtool.h>
#include <linux/bitops.h>
#include <linux/mii.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
@@ -238,7 +238,6 @@ static int el3_rx(struct net_device *dev, int worklimit);
static int el3_close(struct net_device *dev);
static void el3_tx_timeout(struct net_device *dev);
static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static const struct ethtool_ops netdev_ethtool_ops;
static void set_rx_mode(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
@@ -280,25 +279,14 @@ static int tc574_probe(struct pcmcia_device *link)
spin_lock_init(&lp->window_lock);
link->resource[0]->end = 32;
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
- link->conf.ConfigIndex = 1;
+ link->config_flags |= CONF_ENABLE_IRQ;
+ link->config_index = 1;
dev->netdev_ops = &el3_netdev_ops;
- SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
dev->watchdog_timeo = TX_TIMEOUT;
return tc574_config(link);
-} /* tc574_attach */
-
-/*
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-*/
+}
static void tc574_detach(struct pcmcia_device *link)
{
@@ -313,12 +301,6 @@ static void tc574_detach(struct pcmcia_device *link)
free_netdev(dev);
} /* tc574_detach */
-/*
- tc574_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-*/
-
static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
static int tc574_config(struct pcmcia_device *link)
@@ -352,7 +334,7 @@ static int tc574_config(struct pcmcia_device *link)
if (ret)
goto failed;
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -376,8 +358,8 @@ static int tc574_config(struct pcmcia_device *link)
for (i = 0; i < 3; i++)
phys_addr[i] = htons(read_eeprom(ioaddr, i + 10));
if (phys_addr[0] == htons(0x6060)) {
- printk(KERN_NOTICE "3c574_cs: IO port conflict at 0x%03lx"
- "-0x%03lx\n", dev->base_addr, dev->base_addr+15);
+ pr_notice("IO port conflict at 0x%03lx-0x%03lx\n",
+ dev->base_addr, dev->base_addr+15);
goto failed;
}
}
@@ -391,7 +373,7 @@ static int tc574_config(struct pcmcia_device *link)
outw(2<<11, ioaddr + RunnerRdCtrl);
mcr = inb(ioaddr + 2);
outw(0<<11, ioaddr + RunnerRdCtrl);
- printk(KERN_INFO " ASIC rev %d,", mcr>>3);
+ pr_info(" ASIC rev %d,", mcr>>3);
EL3WINDOW(3);
config = inl(ioaddr + Wn3_Config);
lp->default_media = (config & Xcvr) >> Xcvr_shift;
@@ -428,7 +410,7 @@ static int tc574_config(struct pcmcia_device *link)
}
}
if (phy > 32) {
- printk(KERN_NOTICE " No MII transceivers found!\n");
+ pr_notice(" No MII transceivers found!\n");
goto failed;
}
i = mdio_read(ioaddr, lp->phys, 16) | 0x40;
@@ -444,18 +426,16 @@ static int tc574_config(struct pcmcia_device *link)
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
- printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
+ pr_notice("register_netdev() failed\n");
goto failed;
}
- printk(KERN_INFO "%s: %s at io %#3lx, irq %d, "
- "hw_addr %pM.\n",
- dev->name, cardname, dev->base_addr, dev->irq,
- dev->dev_addr);
- printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n",
- 8 << config & Ram_size,
- ram_split[(config & Ram_split) >> Ram_split_shift],
- config & Autoselect ? "autoselect " : "");
+ netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n",
+ cardname, dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n",
+ 8 << config & Ram_size,
+ ram_split[(config & Ram_split) >> Ram_split_shift],
+ config & Autoselect ? "autoselect " : "");
return 0;
@@ -465,12 +445,6 @@ failed:
} /* tc574_config */
-/*
- After a card is removed, tc574_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-*/
-
static void tc574_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
@@ -502,14 +476,14 @@ static void dump_status(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
EL3WINDOW(1);
- printk(KERN_INFO " irq status %04x, rx status %04x, tx status "
- "%02x, tx free %04x\n", inw(ioaddr+EL3_STATUS),
- inw(ioaddr+RxStatus), inb(ioaddr+TxStatus),
- inw(ioaddr+TxFree));
+ netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x, tx free %04x\n",
+ inw(ioaddr+EL3_STATUS),
+ inw(ioaddr+RxStatus), inb(ioaddr+TxStatus),
+ inw(ioaddr+TxFree));
EL3WINDOW(4);
- printk(KERN_INFO " diagnostics: fifo %04x net %04x ethernet %04x"
- " media %04x\n", inw(ioaddr+0x04), inw(ioaddr+0x06),
- inw(ioaddr+0x08), inw(ioaddr+0x0a));
+ netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+ inw(ioaddr+0x04), inw(ioaddr+0x06),
+ inw(ioaddr+0x08), inw(ioaddr+0x0a));
EL3WINDOW(1);
}
@@ -523,7 +497,7 @@ static void tc574_wait_for_completion(struct net_device *dev, int cmd)
while (--i > 0)
if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
if (i == 0)
- printk(KERN_NOTICE "%s: command 0x%04x did not complete!\n", dev->name, cmd);
+ netdev_notice(dev, "command 0x%04x did not complete!\n", cmd);
}
/* Read a word from the EEPROM using the regular EEPROM access register.
@@ -710,7 +684,7 @@ static int el3_open(struct net_device *dev)
netif_start_queue(dev);
tc574_reset(dev);
- lp->media.function = &media_check;
+ lp->media.function = media_check;
lp->media.data = (unsigned long) dev;
lp->media.expires = jiffies + HZ;
add_timer(&lp->media);
@@ -725,7 +699,7 @@ static void el3_tx_timeout(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
- printk(KERN_NOTICE "%s: Transmit timed out!\n", dev->name);
+ netdev_notice(dev, "Transmit timed out!\n");
dump_status(dev);
dev->stats.tx_errors++;
dev->trans_start = jiffies; /* prevent tx timeout */
@@ -848,8 +822,8 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
EL3WINDOW(4);
fifo_diag = inw(ioaddr + Wn4_FIFODiag);
EL3WINDOW(1);
- printk(KERN_NOTICE "%s: adapter failure, FIFO diagnostic"
- " register %04x.\n", dev->name, fifo_diag);
+ netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n",
+ fifo_diag);
if (fifo_diag & 0x0400) {
/* Tx overrun */
tc574_wait_for_completion(dev, TxReset);
@@ -903,7 +877,7 @@ static void media_check(unsigned long arg)
this, we can limp along even if the interrupt is blocked */
if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) {
if (!lp->fast_poll)
- printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+ netdev_info(dev, "interrupt(s) dropped!\n");
local_irq_save(flags);
el3_interrupt(dev->irq, dev);
@@ -926,23 +900,21 @@ static void media_check(unsigned long arg)
if (media != lp->media_status) {
if ((media ^ lp->media_status) & 0x0004)
- printk(KERN_INFO "%s: %s link beat\n", dev->name,
- (lp->media_status & 0x0004) ? "lost" : "found");
+ netdev_info(dev, "%s link beat\n",
+ (lp->media_status & 0x0004) ? "lost" : "found");
if ((media ^ lp->media_status) & 0x0020) {
lp->partner = 0;
if (lp->media_status & 0x0020) {
- printk(KERN_INFO "%s: autonegotiation restarted\n",
- dev->name);
+ netdev_info(dev, "autonegotiation restarted\n");
} else if (partner) {
partner &= lp->advertising;
lp->partner = partner;
- printk(KERN_INFO "%s: autonegotiation complete: "
- "%sbaseT-%cD selected\n", dev->name,
- ((partner & 0x0180) ? "100" : "10"),
- ((partner & 0x0140) ? 'F' : 'H'));
+ netdev_info(dev, "autonegotiation complete: "
+ "%dbaseT-%cD selected\n",
+ (partner & 0x0180) ? 100 : 10,
+ (partner & 0x0140) ? 'F' : 'H');
} else {
- printk(KERN_INFO "%s: link partner did not autonegotiate\n",
- dev->name);
+ netdev_info(dev, "link partner did not autonegotiate\n");
}
EL3WINDOW(3);
@@ -952,10 +924,9 @@ static void media_check(unsigned long arg)
}
if (media & 0x0010)
- printk(KERN_INFO "%s: remote fault detected\n",
- dev->name);
+ netdev_info(dev, "remote fault detected\n");
if (media & 0x0002)
- printk(KERN_INFO "%s: jabber detected\n", dev->name);
+ netdev_info(dev, "jabber detected\n");
lp->media_status = media;
}
spin_unlock_irqrestore(&lp->window_lock, flags);
@@ -1065,16 +1036,6 @@ static int el3_rx(struct net_device *dev, int worklimit)
return worklimit;
}
-static void netdev_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strcpy(info->driver, "3c574_cs");
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = netdev_get_drvinfo,
-};
-
/* Provide ioctl() calls to examine the MII xcvr state. */
static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
@@ -1198,9 +1159,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids);
static struct pcmcia_driver tc574_driver = {
.owner = THIS_MODULE,
- .drv = {
- .name = "3c574_cs",
- },
+ .name = "3c574_cs",
.probe = tc574_probe,
.remove = tc574_detach,
.id_table = tc574_ids,