diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h')
-rw-r--r-- | drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h | 1096 |
1 files changed, 1096 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h new file mode 100644 index 000000000000..6004e478081a --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_fman/inc/flib/fsl_fman_dtsec.h @@ -0,0 +1,1096 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __FSL_FMAN_DTSEC_H +#define __FSL_FMAN_DTSEC_H + +#include "common/general.h" +#include "fsl_enet.h" + +/** + * DOC: dTSEC Init sequence + * + * To prepare dTSEC block for transfer use the following call sequence: + * + * - fman_dtsec_defconfig() - This step is optional and yet recommended. Its + * use is to obtain the default dTSEC configuration parameters. + * + * - Change dtsec configuration in &dtsec_cfg. This structure will be used + * to customize the dTSEC behavior. + * + * - fman_dtsec_init() - Applies the configuration on dTSEC hardware. Note that + * dTSEC is initialized while both Tx and Rx are disabled. + * + * - fman_dtsec_set_mac_address() - Set the station address (mac address). + * This is used by dTSEC to match against received packets. + * + * - fman_dtsec_adjust_link() - Set the link speed and duplex parameters + * after the PHY establishes the link. + * + * - dtsec_enable_tx() and dtsec_enable_rx() to enable transmission and + * reception. + */ + +/** + * DOC: dTSEC Graceful stop + * + * To temporary stop dTSEC activity use fman_dtsec_stop_tx() and + * fman_dtsec_stop_rx(). Note that these functions request dTSEC graceful stop + * but return before this stop is complete. To query for graceful stop + * completion use fman_dtsec_get_event() and check DTSEC_IEVENT_GTSC and + * DTSEC_IEVENT_GRSC bits. Alternatively the dTSEC interrupt mask can be set to + * enable graceful stop interrupts. + * + * To resume operation after graceful stop use fman_dtsec_start_tx() and + * fman_dtsec_start_rx(). + */ + +/** + * DOC: dTSEC interrupt handling + * + * This code does not provide an interrupt handler for dTSEC. Instead this + * handler should be implemented and registered to the operating system by the + * caller. Some primitives for accessing the event status and mask registers + * are provided. + * + * See "dTSEC Events" section for a list of events that dTSEC can generate. + */ + +/** + * DOC: dTSEC Events + * + * Interrupt events cause dTSEC event bits to be set. Software may poll the + * event register at any time to check for pending interrupts. If an event + * occurs and its corresponding enable bit is set in the interrupt mask + * register, the event also causes a hardware interrupt at the PIC. + * + * To poll for event status use the fman_dtsec_get_event() function. + * To configure the interrupt mask use fman_dtsec_enable_interrupt() and + * fman_dtsec_disable_interrupt() functions. + * After servicing a dTSEC interrupt use fman_dtsec_ack_event to reset the + * serviced event bit. + * + * The following events may be signaled by dTSEC hardware: + * + * %DTSEC_IEVENT_BABR - Babbling receive error. This bit indicates that + * a frame was received with length in excess of the MAC's maximum frame length + * register. + * + * %DTSEC_IEVENT_RXC - Receive control (pause frame) interrupt. A pause + * control frame was received while Rx pause frame handling is enabled. + * Also see fman_dtsec_handle_rx_pause(). + * + * %DTSEC_IEVENT_MSRO - MIB counter overflow. The count for one of the MIB + * counters has exceeded the size of its register. + * + * %DTSEC_IEVENT_GTSC - Graceful transmit stop complete. Graceful stop is now + * complete. The transmitter is in a stopped state, in which only pause frames + * can be transmitted. + * Also see fman_dtsec_stop_tx(). + * + * %DTSEC_IEVENT_BABT - Babbling transmit error. The transmitted frame length + * has exceeded the value in the MAC's Maximum Frame Length register. + * + * %DTSEC_IEVENT_TXC - Transmit control (pause frame) interrupt. his bit + * indicates that a control frame was transmitted. + * + * %DTSEC_IEVENT_TXE - Transmit error. This bit indicates that an error + * occurred on the transmitted channel. This bit is set whenever any transmit + * error occurs which causes the dTSEC to discard all or part of a frame + * (LC, CRL, XFUN). + * + * %DTSEC_IEVENT_LC - Late collision. This bit indicates that a collision + * occurred beyond the collision window (slot time) in half-duplex mode. + * The frame is truncated with a bad CRC and the remainder of the frame + * is discarded. + * + * %DTSEC_IEVENT_CRL - Collision retry limit. is bit indicates that the number + * of successive transmission collisions has exceeded the MAC's half-duplex + * register's retransmission maximum count. The frame is discarded without + * being transmitted and transmission of the next frame commences. This only + * occurs while in half-duplex mode. + * The number of retransmit attempts can be set in + * &dtsec_halfdup_cfg.@retransmit before calling fman_dtsec_init(). + * + * %DTSEC_IEVENT_XFUN - Transmit FIFO underrun. This bit indicates that the + * transmit FIFO became empty before the complete frame was transmitted. + * The frame is truncated with a bad CRC and the remainder of the frame is + * discarded. + * + * %DTSEC_IEVENT_MAG - TBD + * + * %DTSEC_IEVENT_MMRD - MII management read completion. + * + * %DTSEC_IEVENT_MMWR - MII management write completion. + * + * %DTSEC_IEVENT_GRSC - Graceful receive stop complete. It allows the user to + * know if the system has completed the stop and it is safe to write to receive + * registers (status, control or configuration registers) that are used by the + * system during normal operation. + * + * %DTSEC_IEVENT_TDPE - Internal data error on transmit. This bit indicates + * that the dTSEC has detected a parity error on its stored transmit data, which + * is likely to compromise the validity of recently transferred frames. + * + * %DTSEC_IEVENT_RDPE - Internal data error on receive. This bit indicates that + * the dTSEC has detected a parity error on its stored receive data, which is + * likely to compromise the validity of recently transferred frames. + */ +/* Interrupt Mask Register (IMASK) */ +#define DTSEC_IMASK_BREN 0x80000000 +#define DTSEC_IMASK_RXCEN 0x40000000 +#define DTSEC_IMASK_MSROEN 0x04000000 +#define DTSEC_IMASK_GTSCEN 0x02000000 +#define DTSEC_IMASK_BTEN 0x01000000 +#define DTSEC_IMASK_TXCEN 0x00800000 +#define DTSEC_IMASK_TXEEN 0x00400000 +#define DTSEC_IMASK_LCEN 0x00040000 +#define DTSEC_IMASK_CRLEN 0x00020000 +#define DTSEC_IMASK_XFUNEN 0x00010000 +#define DTSEC_IMASK_ABRTEN 0x00008000 +#define DTSEC_IMASK_IFERREN 0x00004000 +#define DTSEC_IMASK_MAGEN 0x00000800 +#define DTSEC_IMASK_MMRDEN 0x00000400 +#define DTSEC_IMASK_MMWREN 0x00000200 +#define DTSEC_IMASK_GRSCEN 0x00000100 +#define DTSEC_IMASK_TDPEEN 0x00000002 +#define DTSEC_IMASK_RDPEEN 0x00000001 + +#define DTSEC_EVENTS_MASK \ + ((uint32_t)(DTSEC_IMASK_BREN | \ + DTSEC_IMASK_RXCEN | \ + DTSEC_IMASK_BTEN | \ + DTSEC_IMASK_TXCEN | \ + DTSEC_IMASK_TXEEN | \ + DTSEC_IMASK_ABRTEN | \ + DTSEC_IMASK_LCEN | \ + DTSEC_IMASK_CRLEN | \ + DTSEC_IMASK_XFUNEN | \ + DTSEC_IMASK_IFERREN | \ + DTSEC_IMASK_MAGEN | \ + DTSEC_IMASK_TDPEEN | \ + DTSEC_IMASK_RDPEEN)) + +/* dtsec timestamp event bits */ +#define TMR_PEMASK_TSREEN 0x00010000 +#define TMR_PEVENT_TSRE 0x00010000 + +/* Group address bit indication */ +#define MAC_GROUP_ADDRESS 0x0000010000000000ULL +/* size in bytes of L2 address */ +#define MAC_ADDRLEN 6 + +#define DEFAULT_HALFDUP_ON FALSE +#define DEFAULT_HALFDUP_RETRANSMIT 0xf +#define DEFAULT_HALFDUP_COLL_WINDOW 0x37 +#define DEFAULT_HALFDUP_EXCESS_DEFER TRUE +#define DEFAULT_HALFDUP_NO_BACKOFF FALSE +#define DEFAULT_HALFDUP_BP_NO_BACKOFF FALSE +#define DEFAULT_HALFDUP_ALT_BACKOFF_VAL 0x0A +#define DEFAULT_HALFDUP_ALT_BACKOFF_EN FALSE +#define DEFAULT_RX_DROP_BCAST FALSE +#define DEFAULT_RX_SHORT_FRM TRUE +#define DEFAULT_RX_LEN_CHECK FALSE +#define DEFAULT_TX_PAD_CRC TRUE +#define DEFAULT_TX_CRC FALSE +#define DEFAULT_RX_CTRL_ACC FALSE +#define DEFAULT_TX_PAUSE_TIME 0xf000 +#define DEFAULT_TBIPA 5 +#define DEFAULT_RX_PREPEND 0 +#define DEFAULT_PTP_TSU_EN TRUE +#define DEFAULT_PTP_EXCEPTION_EN TRUE +#define DEFAULT_PREAMBLE_LEN 7 +#define DEFAULT_RX_PREAMBLE FALSE +#define DEFAULT_TX_PREAMBLE FALSE +#define DEFAULT_LOOPBACK FALSE +#define DEFAULT_RX_TIME_STAMP_EN FALSE +#define DEFAULT_TX_TIME_STAMP_EN FALSE +#define DEFAULT_RX_FLOW TRUE +#define DEFAULT_TX_FLOW TRUE +#define DEFAULT_RX_GROUP_HASH_EXD FALSE +#define DEFAULT_TX_PAUSE_TIME_EXTD 0 +#define DEFAULT_RX_PROMISC FALSE +#define DEFAULT_NON_BACK_TO_BACK_IPG1 0x40 +#define DEFAULT_NON_BACK_TO_BACK_IPG2 0x60 +#define DEFAULT_MIN_IFG_ENFORCEMENT 0x50 +#define DEFAULT_BACK_TO_BACK_IPG 0x60 +#define DEFAULT_MAXIMUM_FRAME 0x600 +#define DEFAULT_TBI_PHY_ADDR 5 +#define DEFAULT_WAKE_ON_LAN FALSE + +/* register related defines (bits, field offsets..) */ +#define DTSEC_ID1_ID 0xffff0000 +#define DTSEC_ID1_REV_MJ 0x0000FF00 +#define DTSEC_ID1_REV_MN 0x000000ff + +#define DTSEC_ID2_INT_REDUCED_OFF 0x00010000 +#define DTSEC_ID2_INT_NORMAL_OFF 0x00020000 + +#define DTSEC_ECNTRL_CLRCNT 0x00004000 +#define DTSEC_ECNTRL_AUTOZ 0x00002000 +#define DTSEC_ECNTRL_STEN 0x00001000 +#define DTSEC_ECNTRL_CFG_RO 0x80000000 +#define DTSEC_ECNTRL_GMIIM 0x00000040 +#define DTSEC_ECNTRL_TBIM 0x00000020 +#define DTSEC_ECNTRL_SGMIIM 0x00000002 +#define DTSEC_ECNTRL_RPM 0x00000010 +#define DTSEC_ECNTRL_R100M 0x00000008 +#define DTSEC_ECNTRL_RMM 0x00000004 +#define DTSEC_ECNTRL_QSGMIIM 0x00000001 + +#define DTSEC_TCTRL_THDF 0x00000800 +#define DTSEC_TCTRL_TTSE 0x00000040 +#define DTSEC_TCTRL_GTS 0x00000020 +#define DTSEC_TCTRL_TFC_PAUSE 0x00000010 + +/* PTV offsets */ +#define PTV_PTE_OFST 16 + +#define RCTRL_CFA 0x00008000 +#define RCTRL_GHTX 0x00000400 +#define RCTRL_RTSE 0x00000040 +#define RCTRL_GRS 0x00000020 +#define RCTRL_BC_REJ 0x00000010 +#define RCTRL_MPROM 0x00000008 +#define RCTRL_RSF 0x00000004 +#define RCTRL_UPROM 0x00000001 +#define RCTRL_PROM (RCTRL_UPROM | RCTRL_MPROM) + +#define TMR_CTL_ESFDP 0x00000800 +#define TMR_CTL_ESFDE 0x00000400 + +#define MACCFG1_SOFT_RESET 0x80000000 +#define MACCFG1_LOOPBACK 0x00000100 +#define MACCFG1_RX_FLOW 0x00000020 +#define MACCFG1_TX_FLOW 0x00000010 +#define MACCFG1_TX_EN 0x00000001 +#define MACCFG1_RX_EN 0x00000004 +#define MACCFG1_RESET_RxMC 0x00080000 +#define MACCFG1_RESET_TxMC 0x00040000 +#define MACCFG1_RESET_RxFUN 0x00020000 +#define MACCFG1_RESET_TxFUN 0x00010000 + +#define MACCFG2_NIBBLE_MODE 0x00000100 +#define MACCFG2_BYTE_MODE 0x00000200 +#define MACCFG2_PRE_AM_Rx_EN 0x00000080 +#define MACCFG2_PRE_AM_Tx_EN 0x00000040 +#define MACCFG2_LENGTH_CHECK 0x00000010 +#define MACCFG2_MAGIC_PACKET_EN 0x00000008 +#define MACCFG2_PAD_CRC_EN 0x00000004 +#define MACCFG2_CRC_EN 0x00000002 +#define MACCFG2_FULL_DUPLEX 0x00000001 + +#define PREAMBLE_LENGTH_SHIFT 12 + +#define IPGIFG_NON_BACK_TO_BACK_IPG_1_SHIFT 24 +#define IPGIFG_NON_BACK_TO_BACK_IPG_2_SHIFT 16 +#define IPGIFG_MIN_IFG_ENFORCEMENT_SHIFT 8 + +#define IPGIFG_NON_BACK_TO_BACK_IPG_1 0x7F000000 +#define IPGIFG_NON_BACK_TO_BACK_IPG_2 0x007F0000 +#define IPGIFG_MIN_IFG_ENFORCEMENT 0x0000FF00 +#define IPGIFG_BACK_TO_BACK_IPG 0x0000007F + +#define HAFDUP_ALT_BEB 0x00080000 +#define HAFDUP_BP_NO_BACKOFF 0x00040000 +#define HAFDUP_NO_BACKOFF 0x00020000 +#define HAFDUP_EXCESS_DEFER 0x00010000 +#define HAFDUP_COLLISION_WINDOW 0x000003ff + +#define HAFDUP_ALTERNATE_BEB_TRUNCATION_SHIFT 20 +#define HAFDUP_RETRANSMISSION_MAX_SHIFT 12 +#define HAFDUP_RETRANSMISSION_MAX 0x0000f000 + +#define NUM_OF_HASH_REGS 8 /* Number of hash table registers */ + +/* CAR1/2 bits */ +#define DTSEC_CAR1_TR64 0x80000000 +#define DTSEC_CAR1_TR127 0x40000000 +#define DTSEC_CAR1_TR255 0x20000000 +#define DTSEC_CAR1_TR511 0x10000000 +#define DTSEC_CAR1_TRK1 0x08000000 +#define DTSEC_CAR1_TRMAX 0x04000000 +#define DTSEC_CAR1_TRMGV 0x02000000 + +#define DTSEC_CAR1_RBYT 0x00010000 +#define DTSEC_CAR1_RPKT 0x00008000 +#define DTSEC_CAR1_RFCS 0x00004000 +#define DTSEC_CAR1_RMCA 0x00002000 +#define DTSEC_CAR1_RBCA 0x00001000 +#define DTSEC_CAR1_RXCF 0x00000800 +#define DTSEC_CAR1_RXPF 0x00000400 +#define DTSEC_CAR1_RXUO 0x00000200 +#define DTSEC_CAR1_RALN 0x00000100 +#define DTSEC_CAR1_RFLR 0x00000080 +#define DTSEC_CAR1_RCDE 0x00000040 +#define DTSEC_CAR1_RCSE 0x00000020 +#define DTSEC_CAR1_RUND 0x00000010 +#define DTSEC_CAR1_ROVR 0x00000008 +#define DTSEC_CAR1_RFRG 0x00000004 +#define DTSEC_CAR1_RJBR 0x00000002 +#define DTSEC_CAR1_RDRP 0x00000001 + +#define DTSEC_CAR2_TJBR 0x00080000 +#define DTSEC_CAR2_TFCS 0x00040000 +#define DTSEC_CAR2_TXCF 0x00020000 +#define DTSEC_CAR2_TOVR 0x00010000 +#define DTSEC_CAR2_TUND 0x00008000 +#define DTSEC_CAR2_TFRG 0x00004000 +#define DTSEC_CAR2_TBYT 0x00002000 +#define DTSEC_CAR2_TPKT 0x00001000 +#define DTSEC_CAR2_TMCA 0x00000800 +#define DTSEC_CAR2_TBCA 0x00000400 +#define DTSEC_CAR2_TXPF 0x00000200 +#define DTSEC_CAR2_TDFR 0x00000100 +#define DTSEC_CAR2_TEDF 0x00000080 +#define DTSEC_CAR2_TSCL 0x00000040 +#define DTSEC_CAR2_TMCL 0x00000020 +#define DTSEC_CAR2_TLCL 0x00000010 +#define DTSEC_CAR2_TXCL 0x00000008 +#define DTSEC_CAR2_TNCL 0x00000004 +#define DTSEC_CAR2_TDRP 0x00000001 + +#define CAM1_ERRORS_ONLY \ + (DTSEC_CAR1_RXPF | DTSEC_CAR1_RALN | DTSEC_CAR1_RFLR \ + | DTSEC_CAR1_RCDE | DTSEC_CAR1_RCSE | DTSEC_CAR1_RUND \ + | DTSEC_CAR1_ROVR | DTSEC_CAR1_RFRG | DTSEC_CAR1_RJBR \ + | DTSEC_CAR1_RDRP) + +#define CAM2_ERRORS_ONLY (DTSEC_CAR2_TFCS | DTSEC_CAR2_TXPF | DTSEC_CAR2_TDRP) + +/* + * Group of dTSEC specific counters relating to the standard RMON MIB Group 1 + * (or Ethernet) statistics. + */ +#define CAM1_MIB_GRP_1 \ + (DTSEC_CAR1_RDRP | DTSEC_CAR1_RBYT | DTSEC_CAR1_RPKT | DTSEC_CAR1_RMCA\ + | DTSEC_CAR1_RBCA | DTSEC_CAR1_RALN | DTSEC_CAR1_RUND | DTSEC_CAR1_ROVR\ + | DTSEC_CAR1_RFRG | DTSEC_CAR1_RJBR \ + | DTSEC_CAR1_TR64 | DTSEC_CAR1_TR127 | DTSEC_CAR1_TR255 \ + | DTSEC_CAR1_TR511 | DTSEC_CAR1_TRMAX) + +#define CAM2_MIB_GRP_1 (DTSEC_CAR2_TNCL | DTSEC_CAR2_TDRP) + +/* memory map */ + +struct dtsec_regs { + /* dTSEC General Control and Status Registers */ + uint32_t tsec_id; /* 0x000 ETSEC_ID register */ + uint32_t tsec_id2; /* 0x004 ETSEC_ID2 register */ + uint32_t ievent; /* 0x008 Interrupt event register */ + uint32_t imask; /* 0x00C Interrupt mask register */ + uint32_t reserved0010[1]; + uint32_t ecntrl; /* 0x014 E control register */ + uint32_t ptv; /* 0x018 Pause time value register */ + uint32_t tbipa; /* 0x01C TBI PHY address register */ + uint32_t tmr_ctrl; /* 0x020 Time-stamp Control register */ + uint32_t tmr_pevent; /* 0x024 Time-stamp event register */ + uint32_t tmr_pemask; /* 0x028 Timer event mask register */ + uint32_t reserved002c[5]; + uint32_t tctrl; /* 0x040 Transmit control register */ + uint32_t reserved0044[3]; + uint32_t rctrl; /* 0x050 Receive control register */ + uint32_t reserved0054[11]; + uint32_t igaddr[8]; /* 0x080-0x09C Individual/group address */ + uint32_t gaddr[8]; /* 0x0A0-0x0BC Group address registers 0-7 */ + uint32_t reserved00c0[16]; + uint32_t maccfg1; /* 0x100 MAC configuration #1 */ + uint32_t maccfg2; /* 0x104 MAC configuration #2 */ + uint32_t ipgifg; /* 0x108 IPG/IFG */ + uint32_t hafdup; /* 0x10C Half-duplex */ + uint32_t maxfrm; /* 0x110 Maximum frame */ + uint32_t reserved0114[10]; + uint32_t ifstat; /* 0x13C Interface status */ + uint32_t macstnaddr1; /* 0x140 Station Address,part 1 */ + uint32_t macstnaddr2; /* 0x144 Station Address,part 2 */ + struct { + uint32_t exact_match1; /* octets 1-4 */ + uint32_t exact_match2; /* octets 5-6 */ + } macaddr[15]; /* 0x148-0x1BC mac exact match addresses 1-15 */ + uint32_t reserved01c0[16]; + uint32_t tr64; /* 0x200 transmit and receive 64 byte frame counter */ + uint32_t tr127; /* 0x204 transmit and receive 65 to 127 byte frame + * counter */ + uint32_t tr255; /* 0x208 transmit and receive 128 to 255 byte frame + * counter */ + uint32_t tr511; /* 0x20C transmit and receive 256 to 511 byte frame + * counter */ + uint32_t tr1k; /* 0x210 transmit and receive 512 to 1023 byte frame + * counter */ + uint32_t trmax; /* 0x214 transmit and receive 1024 to 1518 byte frame + * counter */ + uint32_t trmgv; /* 0x218 transmit and receive 1519 to 1522 byte good + * VLAN frame count */ + uint32_t rbyt; /* 0x21C receive byte counter */ + uint32_t rpkt; /* 0x220 receive packet counter */ + uint32_t rfcs; /* 0x224 receive FCS error counter */ + uint32_t rmca; /* 0x228 RMCA receive multicast packet counter */ + uint32_t rbca; /* 0x22C receive broadcast packet counter */ + uint32_t rxcf; /* 0x230 receive control frame packet counter */ + uint32_t rxpf; /* 0x234 receive pause frame packet counter */ + uint32_t rxuo; /* 0x238 receive unknown OP code counter */ + uint32_t raln; /* 0x23C receive alignment error counter */ + uint32_t rflr; /* 0x240 receive frame length error counter */ + uint32_t rcde; /* 0x244 receive code error counter */ + uint32_t rcse; /* 0x248 receive carrier sense error counter */ + uint32_t rund; /* 0x24C receive undersize packet counter */ + uint32_t rovr; /* 0x250 receive oversize packet counter */ + uint32_t rfrg; /* 0x254 receive fragments counter */ + uint32_t rjbr; /* 0x258 receive jabber counter */ + uint32_t rdrp; /* 0x25C receive drop */ + uint32_t tbyt; /* 0x260 transmit byte counter */ + uint32_t tpkt; /* 0x264 transmit packet counter */ + uint32_t tmca; /* 0x268 transmit multicast packet counter */ + uint32_t tbca; /* 0x26C transmit broadcast packet counter */ + uint32_t txpf; /* 0x270 transmit pause control frame counter */ + uint32_t tdfr; /* 0x274 transmit deferral packet counter */ + uint32_t tedf; /* 0x278 transmit excessive deferral packet counter */ + uint32_t tscl; /* 0x27C transmit single collision packet counter */ + uint32_t tmcl; /* 0x280 transmit multiple collision packet counter */ + uint32_t tlcl; /* 0x284 transmit late collision packet counter */ + uint32_t txcl; /* 0x288 transmit excessive collision packet counter */ + uint32_t tncl; /* 0x28C transmit total collision counter */ + uint32_t reserved0290[1]; + uint32_t tdrp; /* 0x294 transmit drop frame counter */ + uint32_t tjbr; /* 0x298 transmit jabber frame counter */ + uint32_t tfcs; /* 0x29C transmit FCS error counter */ + uint32_t txcf; /* 0x2A0 transmit control frame counter */ + uint32_t tovr; /* 0x2A4 transmit oversize frame counter */ + uint32_t tund; /* 0x2A8 transmit undersize frame counter */ + uint32_t tfrg; /* 0x2AC transmit fragments frame counter */ + uint32_t car1; /* 0x2B0 carry register one register* */ + uint32_t car2; /* 0x2B4 carry register two register* */ + uint32_t cam1; /* 0x2B8 carry register one mask register */ + uint32_t cam2; /* 0x2BC carry register two mask register */ + uint32_t reserved02c0[848]; +}; + +/** + * struct dtsec_mib_grp_1_counters - MIB counter overflows + * + * @tr64: Transmit and Receive 64 byte frame count. Increment for each + * good or bad frame, of any type, transmitted or received, which + * is 64 bytes in length. + * @tr127: Transmit and Receive 65 to 127 byte frame count. Increments for + * each good or bad frame of any type, transmitted or received, + * which is 65-127 bytes in length. + * @tr255: Transmit and Receive 128 to 255 byte frame count. Increments + * for each good or bad frame, of any type, transmitted or + * received, which is 128-255 bytes in length. + * @tr511: Transmit and Receive 256 to 511 byte frame count. Increments + * for each good or bad frame, of any type, transmitted or + * received, which is 256-511 bytes in length. + * @tr1k: Transmit and Receive 512 to 1023 byte frame count. Increments + * for each good or bad frame, of any type, transmitted or + * received, which is 512-1023 bytes in length. + * @trmax: Transmit and Receive 1024 to 1518 byte frame count. Increments + * for each good or bad frame, of any type, transmitted or + * received, which is 1024-1518 bytes in length. + * @rfrg: Receive fragments count. Increments for each received frame + * which is less than 64 bytes in length and contains an invalid + * FCS. This includes integral and non-integral lengths. + * @rjbr: Receive jabber count. Increments for received frames which + * exceed 1518 (non VLAN) or 1522 (VLAN) bytes and contain an + * invalid FCS. This includes alignment errors. + * @rdrp: Receive dropped packets count. Increments for received frames + * which are streamed to system but are later dropped due to lack + * of system resources. Does not increment for frames rejected due + * to address filtering. + * @raln: Receive alignment error count. Increments for each received + * frame from 64 to 1518 (non VLAN) or 1522 (VLAN) which contains + * an invalid FCS and is not an integral number of bytes. + * @rund: Receive undersize packet count. Increments each time a frame is + * received which is less than 64 bytes in length and contains a + * valid FCS and is otherwise well formed. This count does not + * include range length errors. + * @rovr: Receive oversize packet count. Increments each time a frame is + * received which exceeded 1518 (non VLAN) or 1522 (VLAN) and + * contains a valid FCS and is otherwise well formed. + * @rbyt: Receive byte count. Increments by the byte count of frames + * received, including those in bad packets, excluding preamble and + * SFD but including FCS bytes. + * @rpkt: Receive packet count. Increments for each received frame + * (including bad packets, all unicast, broadcast, and multicast + * packets). + * @rmca: Receive multicast packet count. Increments for each multicast + * frame with valid CRC and of lengths 64 to 1518 (non VLAN) or + * 1522 (VLAN), excluding broadcast frames. This count does not + * include range/length errors. + * @rbca: Receive broadcast packet count. Increments for each broadcast + * frame with valid CRC and of lengths 64 to 1518 (non VLAN) or + * 1522 (VLAN), excluding multicast frames. Does not include + * range/length errors. + * @tdrp: Transmit drop frame count. Increments each time a memory error + * or an underrun has occurred. + * @tncl: Transmit total collision counter. Increments by the number of + * collisions experienced during the transmission of a frame. Does + * not increment for aborted frames. + * + * The structure contains a group of dTSEC HW specific counters relating to the + * standard RMON MIB Group 1 (or Ethernet statistics) counters. This structure + * is counting only the carry events of the corresponding HW counters. + * + * tr64 to trmax notes: Frame sizes specified are considered excluding preamble + * and SFD but including FCS bytes. + */ +struct dtsec_mib_grp_1_counters { + uint64_t rdrp; + uint64_t tdrp; + uint64_t rbyt; + uint64_t rpkt; + uint64_t rbca; + uint64_t rmca; + uint64_t raln; + uint64_t rund; + uint64_t rovr; + uint64_t rfrg; + uint64_t rjbr; + uint64_t tncl; + uint64_t tr64; + uint64_t tr127; + uint64_t tr255; + uint64_t tr511; + uint64_t tr1k; + uint64_t trmax; +}; + +enum dtsec_stat_counters { + E_DTSEC_STAT_TR64, + E_DTSEC_STAT_TR127, + E_DTSEC_STAT_TR255, + E_DTSEC_STAT_TR511, + E_DTSEC_STAT_TR1K, + E_DTSEC_STAT_TRMAX, + E_DTSEC_STAT_TRMGV, + E_DTSEC_STAT_RBYT, + E_DTSEC_STAT_RPKT, + E_DTSEC_STAT_RMCA, + E_DTSEC_STAT_RBCA, + E_DTSEC_STAT_RXPF, + E_DTSEC_STAT_RALN, + E_DTSEC_STAT_RFLR, + E_DTSEC_STAT_RCDE, + E_DTSEC_STAT_RCSE, + E_DTSEC_STAT_RUND, + E_DTSEC_STAT_ROVR, + E_DTSEC_STAT_RFRG, + E_DTSEC_STAT_RJBR, + E_DTSEC_STAT_RDRP, + E_DTSEC_STAT_TFCS, + E_DTSEC_STAT_TBYT, + E_DTSEC_STAT_TPKT, + E_DTSEC_STAT_TMCA, + E_DTSEC_STAT_TBCA, + E_DTSEC_STAT_TXPF, + E_DTSEC_STAT_TNCL, + E_DTSEC_STAT_TDRP +}; + +enum dtsec_stat_level { + /* No statistics */ + E_MAC_STAT_NONE = 0, + /* Only RMON MIB group 1 (ether stats). Optimized for performance */ + E_MAC_STAT_MIB_GRP1, + /* Only error counters are available. Optimized for performance */ + E_MAC_STAT_PARTIAL, + /* All counters available. Not optimized for performance */ + E_MAC_STAT_FULL +}; + + +/** + * struct dtsec_cfg - dTSEC configuration + * + * @halfdup_on: Transmit half-duplex flow control, under software + * control for 10/100-Mbps half-duplex media. If set, + * back pressure is applied to media by raising carrier. + * @halfdup_retransmit: Number of retransmission attempts following a collision. + * If this is exceeded dTSEC aborts transmission due to + * excessive collisions. The standard specifies the + * attempt limit to be 15. + * @halfdup_coll_window:The number of bytes of the frame during which + * collisions may occur. The default value of 55 + * corresponds to the frame byte at the end of the + * standard 512-bit slot time window. If collisions are + * detected after this byte, the late collision event is + * asserted and transmission of current frame is aborted. + * @rx_drop_bcast: Discard broadcast frames. If set, all broadcast frames + * will be discarded by dTSEC. + * @rx_short_frm: Accept short frames. If set, dTSEC will accept frames + * of length 14..63 bytes. + * @rx_len_check: Length check for received frames. If set, the MAC + * checks the frame's length field on receive to ensure it + * matches the actual data field length. This only works + * for received frames with length field less than 1500. + * No check is performed for larger frames. + * @tx_pad_crc: Pad and append CRC. If set, the MAC pads all + * transmitted short frames and appends a CRC to every + * frame regardless of padding requirement. + * @tx_crc: Transmission CRC enable. If set, the MAC appends a CRC + * to all frames. If frames presented to the MAC have a + * valid length and contain a valid CRC, @tx_crc should be + * reset. + * This field is ignored if @tx_pad_crc is set. + * @rx_ctrl_acc: Control frame accept. If set, this overrides 802.3 + * standard control frame behavior, and all Ethernet frames + * that have an ethertype of 0x8808 are treated as normal + * Ethernet frames and passed up to the packet interface on + * a DA match. Received pause control frames are passed to + * the packet interface only if Rx flow control is also + * disabled. See fman_dtsec_handle_rx_pause() function. + * @tx_pause_time: Transmit pause time value. This pause value is used as + * part of the pause frame to be sent when a transmit pause + * frame is initiated. If set to 0 this disables + * transmission of pause frames. + * @rx_preamble: Receive preamble enable. If set, the MAC recovers the + * received Ethernet 7-byte preamble and passes it to the + * packet interface at the start of each received frame. + * This field should be reset for internal MAC loop-back + * mode. + * @tx_preamble: User defined preamble enable for transmitted frames. + * If set, a user-defined preamble must passed to the MAC + * and it is transmitted instead of the standard preamble. + * @preamble_len: Length, in bytes, of the preamble field preceding each + * Ethernet start-of-frame delimiter byte. The default + * value of 0x7 should be used in order to guarantee + * reliable operation with IEEE 802.3 compliant hardware. + * @rx_prepend: Packet alignment padding length. The specified number + * of bytes (1-31) of zero padding are inserted before the + * start of each received frame. For Ethernet, where + * optional preamble extraction is enabled, the padding + * appears before the preamble, otherwise the padding + * precedes the layer 2 header. + * + * This structure contains basic dTSEC configuration and must be passed to + * fman_dtsec_init() function. A default set of configuration values can be + * obtained by calling fman_dtsec_defconfig(). + */ +struct dtsec_cfg { + bool halfdup_on; + bool halfdup_alt_backoff_en; + bool halfdup_excess_defer; + bool halfdup_no_backoff; + bool halfdup_bp_no_backoff; + uint8_t halfdup_alt_backoff_val; + uint16_t halfdup_retransmit; + uint16_t halfdup_coll_window; + bool rx_drop_bcast; + bool rx_short_frm; + bool rx_len_check; + bool tx_pad_crc; + bool tx_crc; + bool rx_ctrl_acc; + unsigned short tx_pause_time; + unsigned short tbipa; + bool ptp_tsu_en; + bool ptp_exception_en; + bool rx_preamble; + bool tx_preamble; + unsigned char preamble_len; + unsigned char rx_prepend; + bool loopback; + bool rx_time_stamp_en; + bool tx_time_stamp_en; + bool rx_flow; + bool tx_flow; + bool rx_group_hash_exd; + bool rx_promisc; + uint8_t tbi_phy_addr; + uint16_t tx_pause_time_extd; + uint16_t maximum_frame; + uint32_t non_back_to_back_ipg1; + uint32_t non_back_to_back_ipg2; + uint32_t min_ifg_enforcement; + uint32_t back_to_back_ipg; + bool wake_on_lan; +}; + + +/** + * fman_dtsec_defconfig() - Get default dTSEC configuration + * @cfg: pointer to configuration structure. + * + * Call this function to obtain a default set of configuration values for + * initializing dTSEC. The user can overwrite any of the values before calling + * fman_dtsec_init(), if specific configuration needs to be applied. + */ +void fman_dtsec_defconfig(struct dtsec_cfg *cfg); + +/** + * fman_dtsec_init() - Init dTSEC hardware block + * @regs: Pointer to dTSEC register block + * @cfg: dTSEC configuration data + * @iface_mode: dTSEC interface mode, the type of MAC - PHY interface. + * @iface_speed: 1G or 10G + * @macaddr: MAC station address to be assigned to the device + * @fm_rev_maj: major rev number + * @fm_rev_min: minor rev number + * @exceptions_mask: initial exceptions mask + * + * This function initializes dTSEC and applies basic configuration. + * + * dTSEC initialization sequence: + * Before enabling Rx/Tx call dtsec_set_address() to set MAC address, + * fman_dtsec_adjust_link() to configure interface speed and duplex and finally + * dtsec_enable_tx()/dtsec_enable_rx() to start transmission and reception. + * + * Returns: 0 if successful, an error code otherwise. + */ +int fman_dtsec_init(struct dtsec_regs *regs, struct dtsec_cfg *cfg, + enum enet_interface iface_mode, + enum enet_speed iface_speed, + uint8_t *macaddr, uint8_t fm_rev_maj, + uint8_t fm_rev_min, + uint32_t exception_mask); + +/** + * fman_dtsec_enable() - Enable dTSEC Tx and Tx + * @regs: Pointer to dTSEC register block + * @apply_rx: enable rx side + * @apply_tx: enable tx side + * + * This function resets Tx and Rx graceful stop bit and enables dTSEC Tx and Rx. + */ +void fman_dtsec_enable(struct dtsec_regs *regs, bool apply_rx, bool apply_tx); + +/** + * fman_dtsec_disable() - Disable dTSEC Tx and Rx + * @regs: Pointer to dTSEC register block + * @apply_rx: disable rx side + * @apply_tx: disable tx side + * + * This function disables Tx and Rx in dTSEC. + */ +void fman_dtsec_disable(struct dtsec_regs *regs, bool apply_rx, bool apply_tx); + +/** + * fman_dtsec_get_revision() - Get dTSEC hardware revision + * @regs: Pointer to dTSEC register block + * + * Returns dtsec_id content + * + * Call this function to obtain the dTSEC hardware version. + */ +uint32_t fman_dtsec_get_revision(struct dtsec_regs *regs); + +/** + * fman_dtsec_set_mac_address() - Set MAC station address + * @regs: Pointer to dTSEC register block + * @macaddr: MAC address array + * + * This function sets MAC station address. To enable unicast reception call + * this after fman_dtsec_init(). While promiscuous mode is disabled dTSEC will + * match the destination address of received unicast frames against this + * address. + */ +void fman_dtsec_set_mac_address(struct dtsec_regs *regs, uint8_t *macaddr); + +/** + * fman_dtsec_get_mac_address() - Query MAC station address + * @regs: Pointer to dTSEC register block + * @macaddr: MAC address array + */ +void fman_dtsec_get_mac_address(struct dtsec_regs *regs, uint8_t *macaddr); + +/** + * fman_dtsec_set_uc_promisc() - Sets unicast promiscuous mode + * @regs: Pointer to dTSEC register block + * @enable: Enable unicast promiscuous mode + * + * Use this function to enable/disable dTSEC L2 address filtering. If the + * address filtering is disabled all unicast packets are accepted. + * To set dTSEC in promiscuous mode call both fman_dtsec_set_uc_promisc() and + * fman_dtsec_set_mc_promisc() to disable filtering for both unicast and + * multicast addresses. + */ +void fman_dtsec_set_uc_promisc(struct dtsec_regs *regs, bool enable); + +/** + * fman_dtsec_set_wol() - Enable/Disable wake on lan + * (magic packet support) + * @regs: Pointer to dTSEC register block + * @en: Enable Wake On Lan support in dTSEC + * + */ +void fman_dtsec_set_wol(struct dtsec_regs *regs, bool en); + +/** + * fman_dtsec_adjust_link() - Adjust dTSEC speed/duplex settings + * @regs: Pointer to dTSEC register block + * @iface_mode: dTSEC interface mode + * @speed: Link speed + * @full_dx: True for full-duplex, false for half-duplex. + * + * This function configures the MAC to function and the desired rates. Use it + * to configure dTSEC after fman_dtsec_init() and whenever the link speed + * changes (for instance following PHY auto-negociation). + * + * Returns: 0 if successful, an error code otherwise. + */ +int fman_dtsec_adjust_link(struct dtsec_regs *regs, + enum enet_interface iface_mode, + enum enet_speed speed, bool full_dx); + +/** + * fman_dtsec_set_tbi_phy_addr() - Updates TBI address field + * @regs: Pointer to dTSEC register block + * @address: Valid PHY address in the range of 1 to 31. 0 is reserved. + * + * In SGMII mode, the dTSEC's TBIPA field must contain a valid TBI PHY address + * so that the associated TBI PHY (i.e. the link) may be initialized. + * + * Returns: 0 if successful, an error code otherwise. + */ +int fman_dtsec_set_tbi_phy_addr(struct dtsec_regs *regs, + uint8_t addr); + +/** + * fman_dtsec_set_max_frame_len() - Set max frame length + * @regs: Pointer to dTSEC register block + * @length: Max frame length. + * + * Sets maximum frame length for received and transmitted frames. Frames that + * exceeds this length are truncated. + */ +void fman_dtsec_set_max_frame_len(struct dtsec_regs *regs, uint16_t length); + +/** + * fman_dtsec_get_max_frame_len() - Query max frame length + * @regs: Pointer to dTSEC register block + * + * Returns: the current value of the maximum frame length. + */ +uint16_t fman_dtsec_get_max_frame_len(struct dtsec_regs *regs); + +/** + * fman_dtsec_handle_rx_pause() - Configure pause frame handling + * @regs: Pointer to dTSEC register block + * @en: Enable pause frame handling in dTSEC + * + * If enabled, dTSEC will handle pause frames internally. This must be disabled + * if dTSEC is set in half-duplex mode. + * If pause frame handling is disabled and &dtsec_cfg.rx_ctrl_acc is set, pause + * frames will be transferred to the packet interface just like regular Ethernet + * frames. + */ +void fman_dtsec_handle_rx_pause(struct dtsec_regs *regs, bool en); + +/** + * fman_dtsec_set_tx_pause_frames() - Configure Tx pause time + * @regs: Pointer to dTSEC register block + * @time: Time value included in pause frames + * + * Call this function to set the time value used in transmitted pause frames. + * If time is 0, transmission of pause frames is disabled + */ +void fman_dtsec_set_tx_pause_frames(struct dtsec_regs *regs, uint16_t time); + +/** + * fman_dtsec_ack_event() - Acknowledge handled events + * @regs: Pointer to dTSEC register block + * @ev_mask: Events to acknowledge + * + * After handling events signaled by dTSEC in either polling or interrupt mode, + * call this function to reset the associated status bits in dTSEC event + * register. + */ +void fman_dtsec_ack_event(struct dtsec_regs *regs, uint32_t ev_mask); + +/** + * fman_dtsec_get_event() - Returns currently asserted events + * @regs: Pointer to dTSEC register block + * @ev_mask: Mask of relevant events + * + * Call this function to obtain a bit-mask of events that are currently asserted + * in dTSEC, taken from IEVENT register. + * + * Returns: a bit-mask of events asserted in dTSEC. + */ +uint32_t fman_dtsec_get_event(struct dtsec_regs *regs, uint32_t ev_mask); + +/** + * fman_dtsec_get_interrupt_mask() - Returns a bit-mask of enabled interrupts + * @regs: Pointer to dTSEC register block + * + * Call this function to obtain a bit-mask of enabled interrupts + * in dTSEC, taken from IMASK register. + * + * Returns: a bit-mask of enabled interrupts in dTSEC. + */ +uint32_t fman_dtsec_get_interrupt_mask(struct dtsec_regs *regs); + +void fman_dtsec_clear_addr_in_paddr(struct dtsec_regs *regs, + uint8_t paddr_num); + +void fman_dtsec_add_addr_in_paddr(struct dtsec_regs *regs, + uint64_t addr, + uint8_t paddr_num); + +void fman_dtsec_enable_tmr_interrupt (struct dtsec_regs *regs); + +void fman_dtsec_disable_tmr_interrupt(struct dtsec_regs *regs); + +/** + * fman_dtsec_disable_interrupt() - Disables interrupts for the specified events + * @regs: Pointer to dTSEC register block + * @ev_mask: Mask of relevant events + * + * Call this function to disable interrupts in dTSEC for the specified events. + * To enable interrupts use fman_dtsec_enable_interrupt(). + */ +void fman_dtsec_disable_interrupt(struct dtsec_regs *regs, uint32_t ev_mask); + +/** + * fman_dtsec_enable_interrupt() - Enable interrupts for the specified events + * @regs: Pointer to dTSEC register block + * @ev_mask: Mask of relevant events + * + * Call this function to enable interrupts in dTSEC for the specified events. + * To disable interrupts use fman_dtsec_disable_interrupt(). + */ +void fman_dtsec_enable_interrupt(struct dtsec_regs *regs, uint32_t ev_mask); + +/** + * fman_dtsec_set_ts() - Enables dTSEC timestamps + * @regs: Pointer to dTSEC register block + * @en: true to enable timestamps, false to disable them + * + * Call this function to enable/disable dTSEC timestamps. This affects both + * Tx and Rx. + */ +void fman_dtsec_set_ts(struct dtsec_regs *regs, bool en); + +/** + * fman_dtsec_set_bucket() - Enables/disables a filter bucket + * @regs: Pointer to dTSEC register block + * @bucket: Bucket index + * @enable: true/false to enable/disable this bucket + * + * This function enables or disables the specified bucket. Enabling a bucket + * associated with an address configures dTSEC to accept received packets + * with that destination address. + * Multiple addresses may be associated with the same bucket. Disabling a + * bucket will affect all addresses associated with that bucket. A bucket that + * is enabled requires further filtering and verification in the upper layers + * + */ +void fman_dtsec_set_bucket(struct dtsec_regs *regs, int bucket, bool enable); + +/** + * dtsec_set_hash_table() - insert a crc code into thr filter table + * @regs: Pointer to dTSEC register block + * @crc: crc to insert + * @mcast: true is this is a multicast address + * @ghtx: true if we are in ghtx mode + * + * This function inserts a crc code into the filter table. + */ +void fman_dtsec_set_hash_table(struct dtsec_regs *regs, uint32_t crc, + bool mcast, bool ghtx); + +/** + * fman_dtsec_reset_filter_table() - Resets the address filtering table + * @regs: Pointer to dTSEC register block + * @mcast: Reset multicast entries + * @ucast: Reset unicast entries + * + * Resets all entries in L2 address filter table. After calling this function + * all buckets enabled using fman_dtsec_set_bucket() will be disabled. + * If dtsec_init_filter_table() was called with @unicast_hash set to false, + * @ucast argument is ignored. + * This does not affect the primary nor the 15 additional addresses configured + * using dtsec_set_address() or dtsec_set_match_address(). + */ +void fman_dtsec_reset_filter_table(struct dtsec_regs *regs, bool mcast, + bool ucast); + +/** + * fman_dtsec_set_mc_promisc() - Set multicast promiscuous mode + * @regs: Pointer to dTSEC register block + * @enable: Enable multicast promiscuous mode + * + * Call this to enable/disable L2 address filtering for multicast packets. + */ +void fman_dtsec_set_mc_promisc(struct dtsec_regs *regs, bool enable); + +/* statistics APIs */ + +/** + * fman_dtsec_set_stat_level() - Enable a group of MIB statistics counters + * @regs: Pointer to dTSEC register block + * @level: Specifies a certain group of dTSEC MIB HW counters or _all_, + * to specify all the existing counters. + * If set to _none_, it disables all the counters. + * + * Enables the MIB statistics hw counters and sets up the carry interrupt + * masks for the counters corresponding to the @level input parameter. + * + * Returns: error if invalid @level value given. + */ +int fman_dtsec_set_stat_level(struct dtsec_regs *regs, + enum dtsec_stat_level level); + +/** + * fman_dtsec_reset_stat() - Completely resets all dTSEC HW counters + * @regs: Pointer to dTSEC register block + */ +void fman_dtsec_reset_stat(struct dtsec_regs *regs); + +/** + * fman_dtsec_get_clear_carry_regs() - Read and clear carry bits (CAR1-2 registers) + * @regs: Pointer to dTSEC register block + * @car1: car1 register value + * @car2: car2 register value + * + * When set, the carry bits signal that an overflow occurred on the + * corresponding counters. + * Note that the carry bits (CAR1-2 registers) will assert the + * %DTSEC_IEVENT_MSRO interrupt if unmasked (via CAM1-2 regs). + * + * Returns: true if overflow occurred, otherwise - false + */ +bool fman_dtsec_get_clear_carry_regs(struct dtsec_regs *regs, + uint32_t *car1, uint32_t *car2); + +uint32_t fman_dtsec_check_and_clear_tmr_event(struct dtsec_regs *regs); + +uint32_t fman_dtsec_get_stat_counter(struct dtsec_regs *regs, + enum dtsec_stat_counters reg_name); + +void fman_dtsec_start_tx(struct dtsec_regs *regs); +void fman_dtsec_start_rx(struct dtsec_regs *regs); +void fman_dtsec_stop_tx(struct dtsec_regs *regs); +void fman_dtsec_stop_rx(struct dtsec_regs *regs); +uint32_t fman_dtsec_get_rctrl(struct dtsec_regs *regs); + + +#endif /* __FSL_FMAN_DTSEC_H */ |