summaryrefslogtreecommitdiff
path: root/drivers/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd')
-rw-r--r--drivers/mfd/Kconfig66
-rw-r--r--drivers/mfd/Makefile7
-rw-r--r--drivers/mfd/da903x.c16
-rw-r--r--drivers/mfd/dm355evm_msp.c420
-rw-r--r--drivers/mfd/menelaus.c1285
-rw-r--r--drivers/mfd/mfd-core.c1
-rw-r--r--drivers/mfd/tps65010.c1072
-rw-r--r--drivers/mfd/twl4030-core.c472
-rw-r--r--drivers/mfd/twl4030-irq.c30
-rw-r--r--drivers/mfd/wm8350-core.c266
-rw-r--r--drivers/mfd/wm8350-i2c.c4
-rw-r--r--drivers/mfd/wm8350-regmap.c2100
-rw-r--r--drivers/mfd/wm8400-core.c31
13 files changed, 5491 insertions, 279 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 257277394f8c..416f9e7286ba 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -34,6 +34,14 @@ config MFD_ASIC3
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
+config MFD_DM355EVM_MSP
+ bool "DaVinci DM355 EVM microcontroller"
+ depends on I2C && MACH_DAVINCI_DM355_EVM
+ help
+ This driver supports the MSP430 microcontroller used on these
+ boards. MSP430 firmware manages resets and power sequencing,
+ inputs from buttons and the IR remote, LEDs, an RTC, and more.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
@@ -61,9 +69,32 @@ config UCB1400_CORE
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
+config TPS65010
+ tristate "TPS6501x Power Management chips"
+ depends on I2C && GPIOLIB
+ default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+ help
+ If you say yes here you get support for the TPS6501x series of
+ Power Management chips. These include voltage regulators,
+ lithium ion/polymer battery charging, and other features that
+ are often used in portable devices like cell phones and cameras.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps65010.
+
+config MENELAUS
+ bool "Texas Instruments TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP24XX
+ help
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card tranceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
+
config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
+ depends on I2C=y && GENERIC_HARDIRQS
help
Say yes here if you have TWL4030 family chip on your board.
This core driver provides register access and IRQ handling
@@ -116,6 +147,7 @@ config PMIC_DA903X
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
+ select MFD_CORE
depends on I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
@@ -142,6 +174,38 @@ config MFD_WM8350_CONFIG_MODE_3
bool
depends on MFD_WM8350
+config MFD_WM8351_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8351_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8352_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
config MFD_WM8350_I2C
tristate "Support Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 9a5ad8af9116..0c9418b36c26 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3) += asic3.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
+obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
+
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
@@ -17,6 +19,9 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
+obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_MENELAUS) += menelaus.o
+
obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o
obj-$(CONFIG_MFD_CORE) += mfd-core.o
@@ -31,4 +36,4 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
endif
obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
-obj-$(CONFIG_PMIC_DA903X) += da903x.o \ No newline at end of file
+obj-$(CONFIG_PMIC_DA903X) += da903x.o
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 0b5bd85dfcec..99f8dcfe3d98 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -151,12 +151,24 @@ int da903x_write(struct device *dev, int reg, uint8_t val)
}
EXPORT_SYMBOL_GPL(da903x_write);
+int da903x_writes(struct device *dev, int reg, int len, uint8_t *val)
+{
+ return __da903x_writes(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(da903x_writes);
+
int da903x_read(struct device *dev, int reg, uint8_t *val)
{
return __da903x_read(to_i2c_client(dev), reg, val);
}
EXPORT_SYMBOL_GPL(da903x_read);
+int da903x_reads(struct device *dev, int reg, int len, uint8_t *val)
+{
+ return __da903x_reads(to_i2c_client(dev), reg, len, val);
+}
+EXPORT_SYMBOL_GPL(da903x_reads);
+
int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask)
{
struct da903x_chip *chip = dev_get_drvdata(dev);
@@ -435,13 +447,13 @@ static const struct i2c_device_id da903x_id_table[] = {
};
MODULE_DEVICE_TABLE(i2c, da903x_id_table);
-static int __devexit __remove_subdev(struct device *dev, void *unused)
+static int __remove_subdev(struct device *dev, void *unused)
{
platform_device_unregister(to_platform_device(dev));
return 0;
}
-static int __devexit da903x_remove_subdevs(struct da903x_chip *chip)
+static int da903x_remove_subdevs(struct da903x_chip *chip)
{
return device_for_each_child(chip->dev, NULL, __remove_subdev);
}
diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
new file mode 100644
index 000000000000..4214b3f72426
--- /dev/null
+++ b/drivers/mfd/dm355evm_msp.c
@@ -0,0 +1,420 @@
+/*
+ * dm355evm_msp.c - driver for MSP430 firmware on DM355EVM board
+ *
+ * Copyright (C) 2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The DM355 is a DaVinci chip with video support but no C64+ DSP. Its
+ * EVM board has an MSP430 programmed with firmware for various board
+ * support functions. This driver exposes some of them directly, and
+ * supports other drivers (e.g. RTC, input) for more complex access.
+ *
+ * Because this firmware is entirely board-specific, this file embeds
+ * knowledge that would be passed as platform_data in a generic driver.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+
+#if defined(CONFIG_KEYBOARD_DM355EVM) \
+ || defined(CONFIG_KEYBOARD_DM355EVM_MODULE)
+#define msp_has_keyboard() true
+#else
+#define msp_has_keyboard() false
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#define msp_has_leds() true
+#else
+#define msp_has_leds() false
+#endif
+
+#if defined(CONFIG_RTC_DRV_DM355EVM) || defined(CONFIG_RTC_DRV_DM355EVM_MODULE)
+#define msp_has_rtc() true
+#else
+#define msp_has_rtc() false
+#endif
+
+#if defined(CONFIG_VIDEO_TVP514X) || defined(CONFIG_VIDEO_TVP514X_MODULE)
+#define msp_has_tvp() true
+#else
+#define msp_has_tvp() false
+#endif
+
+
+/*----------------------------------------------------------------------*/
+
+/* REVISIT for paranoia's sake, retry reads/writes on error */
+
+static struct i2c_client *msp430;
+
+/**
+ * dm355evm_msp_write - Writes a register in dm355evm_msp
+ * @value: the value to be written
+ * @reg: register address
+ *
+ * Returns result of operation - 0 is success, else negative errno
+ */
+int dm355evm_msp_write(u8 value, u8 reg)
+{
+ return i2c_smbus_write_byte_data(msp430, reg, value);
+}
+EXPORT_SYMBOL(dm355evm_msp_write);
+
+/**
+ * dm355evm_msp_read - Reads a register from dm355evm_msp
+ * @reg: register address
+ *
+ * Returns result of operation - value, or negative errno
+ */
+int dm355evm_msp_read(u8 reg)
+{
+ return i2c_smbus_read_byte_data(msp430, reg);
+}
+EXPORT_SYMBOL(dm355evm_msp_read);
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Many of the msp430 pins are just used as fixed-direction GPIOs.
+ * We could export a few more of them this way, if we wanted.
+ */
+#define MSP_GPIO(bit,reg) ((DM355EVM_MSP_ ## reg) << 3 | (bit))
+
+static const u8 msp_gpios[] = {
+ /* eight leds */
+ MSP_GPIO(0, LED), MSP_GPIO(1, LED),
+ MSP_GPIO(2, LED), MSP_GPIO(3, LED),
+ MSP_GPIO(4, LED), MSP_GPIO(5, LED),
+ MSP_GPIO(6, LED), MSP_GPIO(7, LED),
+ /* SW6 and the NTSC/nPAL jumper */
+ MSP_GPIO(0, SWITCH1), MSP_GPIO(1, SWITCH1),
+ MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
+ MSP_GPIO(4, SWITCH1),
+};
+
+#define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3)
+#define MSP_GPIO_MASK(offset) BIT(msp_gpios[(offset)] & 0x07)
+
+static int msp_gpio_in(struct gpio_chip *chip, unsigned offset)
+{
+ switch (MSP_GPIO_REG(offset)) {
+ case DM355EVM_MSP_SWITCH1:
+ case DM355EVM_MSP_SWITCH2:
+ case DM355EVM_MSP_SDMMC:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static u8 msp_led_cache;
+
+static int msp_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ int reg, status;
+
+ reg = MSP_GPIO_REG(offset);
+ status = dm355evm_msp_read(reg);
+ if (status < 0)
+ return status;
+ if (reg == DM355EVM_MSP_LED)
+ msp_led_cache = status;
+ return status & MSP_GPIO_MASK(offset);
+}
+
+static int msp_gpio_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+ int mask, bits;
+
+ /* NOTE: there are some other signals that could be
+ * packaged as output GPIOs, but they aren't as useful
+ * as the LEDs ... so for now we don't.
+ */
+ if (MSP_GPIO_REG(offset) != DM355EVM_MSP_LED)
+ return -EINVAL;
+
+ mask = MSP_GPIO_MASK(offset);
+ bits = msp_led_cache;
+
+ bits &= ~mask;
+ if (value)
+ bits |= mask;
+ msp_led_cache = bits;
+
+ return dm355evm_msp_write(bits, DM355EVM_MSP_LED);
+}
+
+static void msp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ msp_gpio_out(chip, offset, value);
+}
+
+static struct gpio_chip dm355evm_msp_gpio = {
+ .label = "dm355evm_msp",
+ .owner = THIS_MODULE,
+ .direction_input = msp_gpio_in,
+ .get = msp_gpio_get,
+ .direction_output = msp_gpio_out,
+ .set = msp_gpio_set,
+ .base = -EINVAL, /* dynamic assignment */
+ .ngpio = ARRAY_SIZE(msp_gpios),
+ .can_sleep = true,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct device *add_child(struct i2c_client *client, const char *name,
+ void *pdata, unsigned pdata_len,
+ bool can_wakeup, int irq)
+{
+ struct platform_device *pdev;
+ int status;
+
+ pdev = platform_device_alloc(name, -1);
+ if (!pdev) {
+ dev_dbg(&client->dev, "can't alloc dev\n");
+ status = -ENOMEM;
+ goto err;
+ }
+
+ device_init_wakeup(&pdev->dev, can_wakeup);
+ pdev->dev.parent = &client->dev;
+
+ if (pdata) {
+ status = platform_device_add_data(pdev, pdata, pdata_len);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "can't add platform_data\n");
+ goto err;
+ }
+ }
+
+ if (irq) {
+ struct resource r = {
+ .start = irq,
+ .flags = IORESOURCE_IRQ,
+ };
+
+ status = platform_device_add_resources(pdev, &r, 1);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "can't add irq\n");
+ goto err;
+ }
+ }
+
+ status = platform_device_add(pdev);
+
+err:
+ if (status < 0) {
+ platform_device_put(pdev);
+ dev_err(&client->dev, "can't add %s dev\n", name);
+ return ERR_PTR(status);
+ }
+ return &pdev->dev;
+}
+
+static int add_children(struct i2c_client *client)
+{
+ static const struct {
+ int offset;
+ char *label;
+ } config_inputs[] = {
+ /* 8 == right after the LEDs */
+ { 8 + 0, "sw6_1", },
+ { 8 + 1, "sw6_2", },
+ { 8 + 2, "sw6_3", },
+ { 8 + 3, "sw6_4", },
+ { 8 + 4, "NTSC/nPAL", },
+ };
+
+ struct device *child;
+ int status;
+ int i;
+
+ /* GPIO-ish stuff */
+ dm355evm_msp_gpio.dev = &client->dev;
+ status = gpiochip_add(&dm355evm_msp_gpio);
+ if (status < 0)
+ return status;
+
+ /* LED output */
+ if (msp_has_leds()) {
+#define GPIO_LED(l) .name = l, .active_low = true
+ static struct gpio_led evm_leds[] = {
+ { GPIO_LED("dm355evm::ds14"),
+ .default_trigger = "heartbeat", },
+ { GPIO_LED("dm355evm::ds15"),
+ .default_trigger = "mmc0", },
+ { GPIO_LED("dm355evm::ds16"),
+ /* could also be a CE-ATA drive */
+ .default_trigger = "mmc1", },
+ { GPIO_LED("dm355evm::ds17"),
+ .default_trigger = "nand-disk", },
+ { GPIO_LED("dm355evm::ds18"), },
+ { GPIO_LED("dm355evm::ds19"), },
+ { GPIO_LED("dm355evm::ds20"), },
+ { GPIO_LED("dm355evm::ds21"), },
+ };
+#undef GPIO_LED
+
+ struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(evm_leds); i++)
+ evm_leds[i].gpio = i + dm355evm_msp_gpio.base;
+
+ /* NOTE: these are the only fully programmable LEDs
+ * on the board, since GPIO-61/ds22 (and many signals
+ * going to DC7) must be used for AEMIF address lines
+ * unless the top 1 GB of NAND is unused...
+ */
+ child = add_child(client, "leds-gpio",
+ &evm_led_data, sizeof(evm_led_data),
+ false, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ /* configuration inputs */
+ for (i = 0; i < ARRAY_SIZE(config_inputs); i++) {
+ int gpio = dm355evm_msp_gpio.base + config_inputs[i].offset;
+
+ gpio_request(gpio, config_inputs[i].label);
+ gpio_direction_input(gpio);
+
+ /* make it easy for userspace to see these */
+ gpio_export(gpio, false);
+ }
+
+ /* RTC is a 32 bit counter, no alarm */
+ if (msp_has_rtc()) {
+ child = add_child(client, "rtc-dm355evm",
+ NULL, 0, false, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ /* input from buttons and IR remote (uses the IRQ) */
+ if (msp_has_keyboard()) {
+ child = add_child(client, "dm355evm_keys",
+ NULL, 0, true, client->irq);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ return 0;
+}
+
+/*----------------------------------------------------------------------*/
+
+static void dm355evm_command(unsigned command)
+{
+ int status;
+
+ status = dm355evm_msp_write(command, DM355EVM_MSP_COMMAND);
+ if (status < 0)
+ dev_err(&msp430->dev, "command %d failure %d\n",
+ command, status);
+}
+
+static void dm355evm_power_off(void)
+{
+ dm355evm_command(MSP_COMMAND_POWEROFF);
+}
+
+static int dm355evm_msp_remove(struct i2c_client *client)
+{
+ pm_power_off = NULL;
+ msp430 = NULL;
+ return 0;
+}
+
+static int
+dm355evm_msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int status;
+ const char *video = msp_has_tvp() ? "TVP5146" : "imager";
+
+ if (msp430)
+ return -EBUSY;
+ msp430 = client;
+
+ /* display revision status; doubles as sanity check */
+ status = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
+ if (status < 0)
+ goto fail;
+ dev_info(&client->dev, "firmware v.%02X, %s as video-in\n",
+ status, video);
+
+ /* mux video input: either tvp5146 or some external imager */
+ status = dm355evm_msp_write(msp_has_tvp() ? 0 : MSP_VIDEO_IMAGER,
+ DM355EVM_MSP_VIDEO_IN);
+ if (status < 0)
+ dev_warn(&client->dev, "error %d muxing %s as video-in\n",
+ status, video);
+
+ /* init LED cache, and turn off the LEDs */
+ msp_led_cache = 0xff;
+ dm355evm_msp_write(msp_led_cache, DM355EVM_MSP_LED);
+
+ /* export capabilities we support */
+ status = add_children(client);
+ if (status < 0)
+ goto fail;
+
+ /* PM hookup */
+ pm_power_off = dm355evm_power_off;
+
+ return 0;
+
+fail:
+ /* FIXME remove children ... */
+ dm355evm_msp_remove(client);
+ return status;
+}
+
+static const struct i2c_device_id dm355evm_msp_ids[] = {
+ { "dm355evm_msp", 0 },
+ { /* end of list */ },
+};
+MODULE_DEVICE_TABLE(i2c, dm355evm_msp_ids);
+
+static struct i2c_driver dm355evm_msp_driver = {
+ .driver.name = "dm355evm_msp",
+ .id_table = dm355evm_msp_ids,
+ .probe = dm355evm_msp_probe,
+ .remove = dm355evm_msp_remove,
+};
+
+static int __init dm355evm_msp_init(void)
+{
+ return i2c_add_driver(&dm355evm_msp_driver);
+}
+subsys_initcall(dm355evm_msp_init);
+
+static void __exit dm355evm_msp_exit(void)
+{
+ i2c_del_driver(&dm355evm_msp_driver);
+}
+module_exit(dm355evm_msp_exit);
+
+MODULE_DESCRIPTION("Interface to MSP430 firmware on DM355EVM");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
new file mode 100644
index 000000000000..4b364bae6b3e
--- /dev/null
+++ b/drivers/mfd/menelaus.c
@@ -0,0 +1,1285 @@
+/*
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * Some parts based tps65010.c:
+ * Copyright (C) 2004 Texas Instruments and
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * Some parts based on tlv320aic24.c:
+ * Copyright (C) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Changes for interrupt handling and clean-up by
+ * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com>
+ * Cleanup and generalized support for voltage setting by
+ * Juha Yrjola
+ * Added support for controlling VCORE and regulator sleep states,
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+
+#define DRIVER_NAME "menelaus"
+
+#define MENELAUS_I2C_ADDRESS 0x72
+
+#define MENELAUS_REV 0x01
+#define MENELAUS_VCORE_CTRL1 0x02
+#define MENELAUS_VCORE_CTRL2 0x03
+#define MENELAUS_VCORE_CTRL3 0x04
+#define MENELAUS_VCORE_CTRL4 0x05
+#define MENELAUS_VCORE_CTRL5 0x06
+#define MENELAUS_DCDC_CTRL1 0x07
+#define MENELAUS_DCDC_CTRL2 0x08
+#define MENELAUS_DCDC_CTRL3 0x09
+#define MENELAUS_LDO_CTRL1 0x0A
+#define MENELAUS_LDO_CTRL2 0x0B
+#define MENELAUS_LDO_CTRL3 0x0C
+#define MENELAUS_LDO_CTRL4 0x0D
+#define MENELAUS_LDO_CTRL5 0x0E
+#define MENELAUS_LDO_CTRL6 0x0F
+#define MENELAUS_LDO_CTRL7 0x10
+#define MENELAUS_LDO_CTRL8 0x11
+#define MENELAUS_SLEEP_CTRL1 0x12
+#define MENELAUS_SLEEP_CTRL2 0x13
+#define MENELAUS_DEVICE_OFF 0x14
+#define MENELAUS_OSC_CTRL 0x15
+#define MENELAUS_DETECT_CTRL 0x16
+#define MENELAUS_INT_MASK1 0x17
+#define MENELAUS_INT_MASK2 0x18
+#define MENELAUS_INT_STATUS1 0x19
+#define MENELAUS_INT_STATUS2 0x1A
+#define MENELAUS_INT_ACK1 0x1B
+#define MENELAUS_INT_ACK2 0x1C
+#define MENELAUS_GPIO_CTRL 0x1D
+#define MENELAUS_GPIO_IN 0x1E
+#define MENELAUS_GPIO_OUT 0x1F
+#define MENELAUS_BBSMS 0x20
+#define MENELAUS_RTC_CTRL 0x21
+#define MENELAUS_RTC_UPDATE 0x22
+#define MENELAUS_RTC_SEC 0x23
+#define MENELAUS_RTC_MIN 0x24
+#define MENELAUS_RTC_HR 0x25
+#define MENELAUS_RTC_DAY 0x26
+#define MENELAUS_RTC_MON 0x27
+#define MENELAUS_RTC_YR 0x28
+#define MENELAUS_RTC_WKDAY 0x29
+#define MENELAUS_RTC_AL_SEC 0x2A
+#define MENELAUS_RTC_AL_MIN 0x2B
+#define MENELAUS_RTC_AL_HR 0x2C
+#define MENELAUS_RTC_AL_DAY 0x2D
+#define MENELAUS_RTC_AL_MON 0x2E
+#define MENELAUS_RTC_AL_YR 0x2F
+#define MENELAUS_RTC_COMP_MSB 0x30
+#define MENELAUS_RTC_COMP_LSB 0x31
+#define MENELAUS_S1_PULL_EN 0x32
+#define MENELAUS_S1_PULL_DIR 0x33
+#define MENELAUS_S2_PULL_EN 0x34
+#define MENELAUS_S2_PULL_DIR 0x35
+#define MENELAUS_MCT_CTRL1 0x36
+#define MENELAUS_MCT_CTRL2 0x37
+#define MENELAUS_MCT_CTRL3 0x38
+#define MENELAUS_MCT_PIN_ST 0x39
+#define MENELAUS_DEBOUNCE1 0x3A
+
+#define IH_MENELAUS_IRQS 12
+#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
+#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
+#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
+#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
+#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
+#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
+#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
+#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
+#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
+#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
+#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
+#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
+#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
+#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
+#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
+#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
+
+static void menelaus_work(struct work_struct *_menelaus);
+
+struct menelaus_chip {
+ struct mutex lock;
+ struct i2c_client *client;
+ struct work_struct work;
+#ifdef CONFIG_RTC_DRV_TWL92330
+ struct rtc_device *rtc;
+ u8 rtc_control;
+ unsigned uie:1;
+#endif
+ unsigned vcore_hw_mode:1;
+ u8 mask1, mask2;
+ void (*handlers[16])(struct menelaus_chip *);
+ void (*mmc_callback)(void *data, u8 mask);
+ void *mmc_callback_data;
+};
+
+static struct menelaus_chip *the_menelaus;
+
+static int menelaus_write_reg(int reg, u8 value)
+{
+ int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
+
+ if (val < 0) {
+ pr_err(DRIVER_NAME ": write error");
+ return val;
+ }
+
+ return 0;
+}
+
+static int menelaus_read_reg(int reg)
+{
+ int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
+
+ if (val < 0)
+ pr_err(DRIVER_NAME ": read error");
+
+ return val;
+}
+
+static int menelaus_enable_irq(int irq)
+{
+ if (irq > 7) {
+ irq -= 8;
+ the_menelaus->mask2 &= ~(1 << irq);
+ return menelaus_write_reg(MENELAUS_INT_MASK2,
+ the_menelaus->mask2);
+ } else {
+ the_menelaus->mask1 &= ~(1 << irq);
+ return menelaus_write_reg(MENELAUS_INT_MASK1,
+ the_menelaus->mask1);
+ }
+}
+
+static int menelaus_disable_irq(int irq)
+{
+ if (irq > 7) {
+ irq -= 8;
+ the_menelaus->mask2 |= (1 << irq);
+ return menelaus_write_reg(MENELAUS_INT_MASK2,
+ the_menelaus->mask2);
+ } else {
+ the_menelaus->mask1 |= (1 << irq);
+ return menelaus_write_reg(MENELAUS_INT_MASK1,
+ the_menelaus->mask1);
+ }
+}
+
+static int menelaus_ack_irq(int irq)
+{
+ if (irq > 7)
+ return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
+ else
+ return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
+}
+
+/* Adds a handler for an interrupt. Does not run in interrupt context */
+static int menelaus_add_irq_work(int irq,
+ void (*handler)(struct menelaus_chip *))
+{
+ int ret = 0;
+
+ mutex_lock(&the_menelaus->lock);
+ the_menelaus->handlers[irq] = handler;
+ ret = menelaus_enable_irq(irq);
+ mutex_unlock(&the_menelaus->lock);
+
+ return ret;
+}
+
+/* Removes handler for an interrupt */
+static int menelaus_remove_irq_work(int irq)
+{
+ int ret = 0;
+
+ mutex_lock(&the_menelaus->lock);
+ ret = menelaus_disable_irq(irq);
+ the_menelaus->handlers[irq] = NULL;
+ mutex_unlock(&the_menelaus->lock);
+
+ return ret;
+}
+
+/*
+ * Gets scheduled when a card detect interrupt happens. Note that in some cases
+ * this line is wired to card cover switch rather than the card detect switch
+ * in each slot. In this case the cards are not seen by menelaus.
+ * FIXME: Add handling for D1 too
+ */
+static void menelaus_mmc_cd_work(struct menelaus_chip *menelaus_hw)
+{
+ int reg;
+ unsigned char card_mask = 0;
+
+ reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
+ if (reg < 0)
+ return;
+
+ if (!(reg & 0x1))
+ card_mask |= (1 << 0);
+
+ if (!(reg & 0x2))
+ card_mask |= (1 << 1);
+
+ if (menelaus_hw->mmc_callback)
+ menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
+ card_mask);
+}
+
+/*
+ * Toggles the MMC slots between open-drain and push-pull mode.
+ */
+int menelaus_set_mmc_opendrain(int slot, int enable)
+{
+ int ret, val;
+
+ if (slot != 1 && slot != 2)
+ return -EINVAL;
+ mutex_lock(&the_menelaus->lock);
+ ret = menelaus_read_reg(MENELAUS_MCT_CTRL1);
+ if (ret < 0) {
+ mutex_unlock(&the_menelaus->lock);
+ return ret;
+ }
+ val = ret;
+ if (slot == 1) {
+ if (enable)
+ val |= 1 << 2;
+ else
+ val &= ~(1 << 2);
+ } else {
+ if (enable)
+ val |= 1 << 3;
+ else
+ val &= ~(1 << 3);
+ }
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, val);
+ mutex_unlock(&the_menelaus->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(menelaus_set_mmc_opendrain);
+
+int menelaus_set_slot_sel(int enable)
+{
+ int ret;
+
+ mutex_lock(&the_menelaus->lock);
+ ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
+ if (ret < 0)
+ goto out;
+ ret |= 0x02;
+ if (enable)
+ ret |= 1 << 5;
+ else
+ ret &= ~(1 << 5);
+ ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
+out:
+ mutex_unlock(&the_menelaus->lock);
+ return ret;
+}
+EXPORT_SYMBOL(menelaus_set_slot_sel);
+
+int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_en)
+{
+ int ret, val;
+
+ if (slot != 1 && slot != 2)
+ return -EINVAL;
+ if (power >= 3)
+ return -EINVAL;
+
+ mutex_lock(&the_menelaus->lock);
+
+ ret = menelaus_read_reg(MENELAUS_MCT_CTRL2);
+ if (ret < 0)
+ goto out;
+ val = ret;
+ if (slot == 1) {
+ if (cd_en)
+ val |= (1 << 4) | (1 << 6);
+ else
+ val &= ~((1 << 4) | (1 << 6));
+ } else {
+ if (cd_en)
+ val |= (1 << 5) | (1 << 7);
+ else
+ val &= ~((1 << 5) | (1 << 7));
+ }
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, val);
+ if (ret < 0)
+ goto out;
+
+ ret = menelaus_read_reg(MENELAUS_MCT_CTRL3);
+ if (ret < 0)
+ goto out;
+ val = ret;
+ if (slot == 1) {
+ if (enable)
+ val |= 1 << 0;
+ else
+ val &= ~(1 << 0);
+ } else {
+ int b;
+
+ if (enable)
+ ret |= 1 << 1;
+ else
+ ret &= ~(1 << 1);
+ b = menelaus_read_reg(MENELAUS_MCT_CTRL2);
+ b &= ~0x03;
+ b |= power;
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, b);
+ if (ret < 0)
+ goto out;
+ }
+ /* Disable autonomous shutdown */
+ val &= ~(0x03 << 2);
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, val);
+out:
+ mutex_unlock(&the_menelaus->lock);
+ return ret;
+}
+EXPORT_SYMBOL(menelaus_set_mmc_slot);
+
+int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+ void *data)
+{
+ int ret = 0;
+
+ the_menelaus->mmc_callback_data = data;
+ the_menelaus->mmc_callback = callback;
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
+ menelaus_mmc_cd_work);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
+ menelaus_mmc_cd_work);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
+ menelaus_mmc_cd_work);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
+ menelaus_mmc_cd_work);
+
+ return ret;
+}
+EXPORT_SYMBOL(menelaus_register_mmc_callback);
+
+void menelaus_unregister_mmc_callback(void)
+{
+ menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
+ menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
+ menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
+ menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
+
+ the_menelaus->mmc_callback = NULL;
+ the_menelaus->mmc_callback_data = 0;
+}
+EXPORT_SYMBOL(menelaus_unregister_mmc_callback);
+
+struct menelaus_vtg {
+ const char *name;
+ u8 vtg_reg;
+ u8 vtg_shift;
+ u8 vtg_bits;
+ u8 mode_reg;
+};
+
+struct menelaus_vtg_value {
+ u16 vtg;
+ u16 val;
+};
+
+static int menelaus_set_voltage(const struct menelaus_vtg *vtg, int mV,
+ int vtg_val, int mode)
+{
+ int val, ret;
+ struct i2c_client *c = the_menelaus->client;
+
+ mutex_lock(&the_menelaus->lock);
+ if (vtg == 0)
+ goto set_voltage;
+
+ ret = menelaus_read_reg(vtg->vtg_reg);
+ if (ret < 0)
+ goto out;
+ val = ret & ~(((1 << vtg->vtg_bits) - 1) << vtg->vtg_shift);
+ val |= vtg_val << vtg->vtg_shift;
+
+ dev_dbg(&c->dev, "Setting voltage '%s'"
+ "to %d mV (reg 0x%02x, val 0x%02x)\n",
+ vtg->name, mV, vtg->vtg_reg, val);
+
+ ret = menelaus_write_reg(vtg->vtg_reg, val);
+ if (ret < 0)
+ goto out;
+set_voltage:
+ ret = menelaus_write_reg(vtg->mode_reg, mode);
+out:
+ mutex_unlock(&the_menelaus->lock);
+ if (ret == 0) {
+ /* Wait for voltage to stabilize */
+ msleep(1);
+ }
+ return ret;
+}
+
+static int menelaus_get_vtg_value(int vtg, const struct menelaus_vtg_value *tbl,
+ int n)
+{
+ int i;
+
+ for (i = 0; i < n; i++, tbl++)
+ if (tbl->vtg == vtg)
+ return tbl->val;
+ return -EINVAL;
+}
+
+/*
+ * Vcore can be programmed in two ways:
+ * SW-controlled: Required voltage is programmed into VCORE_CTRL1
+ * HW-controlled: Required range (roof-floor) is programmed into VCORE_CTRL3
+ * and VCORE_CTRL4
+ *
+ * Call correct 'set' function accordingly
+ */
+
+static const struct menelaus_vtg_value vcore_values[] = {
+ { 1000, 0 },
+ { 1025, 1 },
+ { 1050, 2 },
+ { 1075, 3 },
+ { 1100, 4 },
+ { 1125, 5 },
+ { 1150, 6 },
+ { 1175, 7 },
+ { 1200, 8 },
+ { 1225, 9 },
+ { 1250, 10 },
+ { 1275, 11 },
+ { 1300, 12 },
+ { 1325, 13 },
+ { 1350, 14 },
+ { 1375, 15 },
+ { 1400, 16 },
+ { 1425, 17 },
+ { 1450, 18 },
+};
+
+int menelaus_set_vcore_sw(unsigned int mV)
+{
+ int val, ret;
+ struct i2c_client *c = the_menelaus->client;
+
+ val = menelaus_get_vtg_value(mV, vcore_values,
+ ARRAY_SIZE(vcore_values));
+ if (val < 0)
+ return -EINVAL;
+
+ dev_dbg(&c->dev, "Setting VCORE to %d mV (val 0x%02x)\n", mV, val);
+
+ /* Set SW mode and the voltage in one go. */
+ mutex_lock(&the_menelaus->lock);
+ ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
+ if (ret == 0)
+ the_menelaus->vcore_hw_mode = 0;
+ mutex_unlock(&the_menelaus->lock);
+ msleep(1);
+
+ return ret;
+}
+
+int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV)
+{
+ int fval, rval, val, ret;
+ struct i2c_client *c = the_menelaus->client;
+
+ rval = menelaus_get_vtg_value(roof_mV, vcore_values,
+ ARRAY_SIZE(vcore_values));
+ if (rval < 0)
+ return -EINVAL;
+ fval = menelaus_get_vtg_value(floor_mV, vcore_values,
+ ARRAY_SIZE(vcore_values));
+ if (fval < 0)
+ return -EINVAL;
+
+ dev_dbg(&c->dev, "Setting VCORE FLOOR to %d mV and ROOF to %d mV\n",
+ floor_mV, roof_mV);
+
+ mutex_lock(&the_menelaus->lock);
+ ret = menelaus_write_reg(MENELAUS_VCORE_CTRL3, fval);
+ if (ret < 0)
+ goto out;
+ ret = menelaus_write_reg(MENELAUS_VCORE_CTRL4, rval);
+ if (ret < 0)
+ goto out;
+ if (!the_menelaus->vcore_hw_mode) {
+ val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
+ /* HW mode, turn OFF byte comparator */
+ val |= ((1 << 7) | (1 << 5));
+ ret = menelaus_write_reg(MENELAUS_VCORE_CTRL1, val);
+ the_menelaus->vcore_hw_mode = 1;
+ }
+ msleep(1);
+out:
+ mutex_unlock(&the_menelaus->lock);
+ return ret;
+}
+
+static const struct menelaus_vtg vmem_vtg = {
+ .name = "VMEM",
+ .vtg_reg = MENELAUS_LDO_CTRL1,
+ .vtg_shift = 0,
+ .vtg_bits = 2,
+ .mode_reg = MENELAUS_LDO_CTRL3,
+};
+
+static const struct menelaus_vtg_value vmem_values[] = {
+ { 1500, 0 },
+ { 1800, 1 },
+ { 1900, 2 },
+ { 2500, 3 },
+};
+
+int menelaus_set_vmem(unsigned int mV)
+{
+ int val;
+
+ if (mV == 0)
+ return menelaus_set_voltage(&vmem_vtg, 0, 0, 0);
+
+ val = menelaus_get_vtg_value(mV, vmem_values, ARRAY_SIZE(vmem_values));
+ if (val < 0)
+ return -EINVAL;
+ return menelaus_set_voltage(&vmem_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vmem);
+
+static const struct menelaus_vtg vio_vtg = {
+ .name = "VIO",
+ .vtg_reg = MENELAUS_LDO_CTRL1,
+ .vtg_shift = 2,
+ .vtg_bits = 2,
+ .mode_reg = MENELAUS_LDO_CTRL4,
+};
+
+static const struct menelaus_vtg_value vio_values[] = {
+ { 1500, 0 },
+ { 1800, 1 },
+ { 2500, 2 },
+ { 2800, 3 },
+};
+
+int menelaus_set_vio(unsigned int mV)
+{
+ int val;
+
+ if (mV == 0)
+ return menelaus_set_voltage(&vio_vtg, 0, 0, 0);
+
+ val = menelaus_get_vtg_value(mV, vio_values, ARRAY_SIZE(vio_values));
+ if (val < 0)
+ return -EINVAL;
+ return menelaus_set_voltage(&vio_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vio);
+
+static const struct menelaus_vtg_value vdcdc_values[] = {
+ { 1500, 0 },
+ { 1800, 1 },
+ { 2000, 2 },
+ { 2200, 3 },
+ { 2400, 4 },
+ { 2800, 5 },
+ { 3000, 6 },
+ { 3300, 7 },
+};
+
+static const struct menelaus_vtg vdcdc2_vtg = {
+ .name = "VDCDC2",
+ .vtg_reg = MENELAUS_DCDC_CTRL1,
+ .vtg_shift = 0,
+ .vtg_bits = 3,
+ .mode_reg = MENELAUS_DCDC_CTRL2,
+};
+
+static const struct menelaus_vtg vdcdc3_vtg = {
+ .name = "VDCDC3",
+ .vtg_reg = MENELAUS_DCDC_CTRL1,
+ .vtg_shift = 3,
+ .vtg_bits = 3,
+ .mode_reg = MENELAUS_DCDC_CTRL3,
+};
+
+int menelaus_set_vdcdc(int dcdc, unsigned int mV)
+{
+ const struct menelaus_vtg *vtg;
+ int val;
+
+ if (dcdc != 2 && dcdc != 3)
+ return -EINVAL;
+ if (dcdc == 2)
+ vtg = &vdcdc2_vtg;
+ else
+ vtg = &vdcdc3_vtg;
+
+ if (mV == 0)
+ return menelaus_set_voltage(vtg, 0, 0, 0);
+
+ val = menelaus_get_vtg_value(mV, vdcdc_values,
+ ARRAY_SIZE(vdcdc_values));
+ if (val < 0)
+ return -EINVAL;
+ return menelaus_set_voltage(vtg, mV, val, 0x03);
+}
+
+static const struct menelaus_vtg_value vmmc_values[] = {
+ { 1850, 0 },
+ { 2800, 1 },
+ { 3000, 2 },
+ { 3100, 3 },
+};
+
+static const struct menelaus_vtg vmmc_vtg = {
+ .name = "VMMC",
+ .vtg_reg = MENELAUS_LDO_CTRL1,
+ .vtg_shift = 6,
+ .vtg_bits = 2,
+ .mode_reg = MENELAUS_LDO_CTRL7,
+};
+
+int menelaus_set_vmmc(unsigned int mV)
+{
+ int val;
+
+ if (mV == 0)
+ return menelaus_set_voltage(&vmmc_vtg, 0, 0, 0);
+
+ val = menelaus_get_vtg_value(mV, vmmc_values, ARRAY_SIZE(vmmc_values));
+ if (val < 0)
+ return -EINVAL;
+ return menelaus_set_voltage(&vmmc_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vmmc);
+
+
+static const struct menelaus_vtg_value vaux_values[] = {
+ { 1500, 0 },
+ { 1800, 1 },
+ { 2500, 2 },
+ { 2800, 3 },
+};
+
+static const struct menelaus_vtg vaux_vtg = {
+ .name = "VAUX",
+ .vtg_reg = MENELAUS_LDO_CTRL1,
+ .vtg_shift = 4,
+ .vtg_bits = 2,
+ .mode_reg = MENELAUS_LDO_CTRL6,
+};
+
+int menelaus_set_vaux(unsigned int mV)
+{
+ int val;
+
+ if (mV == 0)
+ return menelaus_set_voltage(&vaux_vtg, 0, 0, 0);
+
+ val = menelaus_get_vtg_value(mV, vaux_values, ARRAY_SIZE(vaux_values));
+ if (val < 0)
+ return -EINVAL;
+ return menelaus_set_voltage(&vaux_vtg, mV, val, 0x02);
+}
+EXPORT_SYMBOL(menelaus_set_vaux);
+
+int menelaus_get_slot_pin_states(void)
+{
+ return menelaus_read_reg(MENELAUS_MCT_PIN_ST);
+}
+EXPORT_SYMBOL(menelaus_get_slot_pin_states);
+
+int menelaus_set_regulator_sleep(int enable, u32 val)
+{
+ int t, ret;
+ struct i2c_client *c = the_menelaus->client;
+
+ mutex_lock(&the_menelaus->lock);
+ ret = menelaus_write_reg(MENELAUS_SLEEP_CTRL2, val);
+ if (ret < 0)
+ goto out;
+
+ dev_dbg(&c->dev, "regulator sleep configuration: %02x\n", val);
+
+ ret = menelaus_read_reg(MENELAUS_GPIO_CTRL);
+ if (ret < 0)
+ goto out;
+ t = ((1 << 6) | 0x04);
+ if (enable)
+ ret |= t;
+ else
+ ret &= ~t;
+ ret = menelaus_write_reg(MENELAUS_GPIO_CTRL, ret);
+out:
+ mutex_unlock(&the_menelaus->lock);
+ return ret;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Handles Menelaus interrupts. Does not run in interrupt context */
+static void menelaus_work(struct work_struct *_menelaus)
+{
+ struct menelaus_chip *menelaus =
+ container_of(_menelaus, struct menelaus_chip, work);
+ void (*handler)(struct menelaus_chip *menelaus);
+
+ while (1) {
+ unsigned isr;
+
+ isr = (menelaus_read_reg(MENELAUS_INT_STATUS2)
+ & ~menelaus->mask2) << 8;
+ isr |= menelaus_read_reg(MENELAUS_INT_STATUS1)
+ & ~menelaus->mask1;
+ if (!isr)
+ break;
+
+ while (isr) {
+ int irq = fls(isr) - 1;
+ isr &= ~(1 << irq);
+
+ mutex_lock(&menelaus->lock);
+ menelaus_disable_irq(irq);
+ menelaus_ack_irq(irq);
+ handler = menelaus->handlers[irq];
+ if (handler)
+ handler(menelaus);
+ menelaus_enable_irq(irq);
+ mutex_unlock(&menelaus->lock);
+ }
+ }
+ enable_irq(menelaus->client->irq);
+}
+
+/*
+ * We cannot use I2C in interrupt context, so we just schedule work.
+ */
+static irqreturn_t menelaus_irq(int irq, void *_menelaus)
+{
+ struct menelaus_chip *menelaus = _menelaus;
+
+ disable_irq_nosync(irq);
+ (void)schedule_work(&menelaus->work);
+
+ return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/*
+ * The RTC needs to be set once, then it runs on backup battery power.
+ * It supports alarms, including system wake alarms (from some modes);
+ * and 1/second IRQs if requested.
+ */
+#ifdef CONFIG_RTC_DRV_TWL92330
+
+#define RTC_CTRL_RTC_EN (1 << 0)
+#define RTC_CTRL_AL_EN (1 << 1)
+#define RTC_CTRL_MODE12 (1 << 2)
+#define RTC_CTRL_EVERY_MASK (3 << 3)
+#define RTC_CTRL_EVERY_SEC (0 << 3)
+#define RTC_CTRL_EVERY_MIN (1 << 3)
+#define RTC_CTRL_EVERY_HR (2 << 3)
+#define RTC_CTRL_EVERY_DAY (3 << 3)
+
+#define RTC_UPDATE_EVERY 0x08
+
+#define RTC_HR_PM (1 << 7)
+
+static void menelaus_to_time(char *regs, struct rtc_time *t)
+{
+ t->tm_sec = bcd2bin(regs[0]);
+ t->tm_min = bcd2bin(regs[1]);
+ if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
+ t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1;
+ if (regs[2] & RTC_HR_PM)
+ t->tm_hour += 12;
+ } else
+ t->tm_hour = bcd2bin(regs[2] & 0x3f);
+ t->tm_mday = bcd2bin(regs[3]);
+ t->tm_mon = bcd2bin(regs[4]) - 1;
+ t->tm_year = bcd2bin(regs[5]) + 100;
+}
+
+static int time_to_menelaus(struct rtc_time *t, int regnum)
+{
+ int hour, status;
+
+ status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec));
+ if (status < 0)
+ goto fail;
+
+ status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min));
+ if (status < 0)
+ goto fail;
+
+ if (the_menelaus->rtc_control & RTC_CTRL_MODE12) {
+ hour = t->tm_hour + 1;
+ if (hour > 12)
+ hour = RTC_HR_PM | bin2bcd(hour - 12);
+ else
+ hour = bin2bcd(hour);
+ } else
+ hour = bin2bcd(t->tm_hour);
+ status = menelaus_write_reg(regnum++, hour);
+ if (status < 0)
+ goto fail;
+
+ status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday));
+ if (status < 0)
+ goto fail;
+
+ status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1));
+ if (status < 0)
+ goto fail;
+
+ status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100));
+ if (status < 0)
+ goto fail;
+
+ return 0;
+fail:
+ dev_err(&the_menelaus->client->dev, "rtc write reg %02x, err %d\n",
+ --regnum, status);
+ return status;
+}
+
+static int menelaus_read_time(struct device *dev, struct rtc_time *t)
+{
+ struct i2c_msg msg[2];
+ char regs[7];
+ int status;
+
+ /* block read date and time registers */
+ regs[0] = MENELAUS_RTC_SEC;
+
+ msg[0].addr = MENELAUS_I2C_ADDRESS;
+ msg[0].flags = 0;
+ msg[0].len = 1;
+ msg[0].buf = regs;
+
+ msg[1].addr = MENELAUS_I2C_ADDRESS;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = sizeof(regs);
+ msg[1].buf = regs;
+
+ status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
+ if (status != 2) {
+ dev_err(dev, "%s error %d\n", "read", status);
+ return -EIO;
+ }
+
+ menelaus_to_time(regs, t);
+ t->tm_wday = bcd2bin(regs[6]);
+
+ return 0;
+}
+
+static int menelaus_set_time(struct device *dev, struct rtc_time *t)
+{
+ int status;
+
+ /* write date and time registers */
+ status = time_to_menelaus(t, MENELAUS_RTC_SEC);
+ if (status < 0)
+ return status;
+ status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday));
+ if (status < 0) {
+ dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
+ "err %d\n", MENELAUS_RTC_WKDAY, status);
+ return status;
+ }
+
+ /* now commit the write */
+ status = menelaus_write_reg(MENELAUS_RTC_UPDATE, RTC_UPDATE_EVERY);
+ if (status < 0)
+ dev_err(&the_menelaus->client->dev, "rtc commit time, err %d\n",
+ status);
+
+ return 0;
+}
+
+static int menelaus_read_alarm(struct device *dev, struct rtc_wkalrm *w)
+{
+ struct i2c_msg msg[2];
+ char regs[6];
+ int status;
+
+ /* block read alarm registers */
+ regs[0] = MENELAUS_RTC_AL_SEC;
+
+ msg[0].addr = MENELAUS_I2C_ADDRESS;
+ msg[0].flags = 0;
+ msg[0].len = 1;
+ msg[0].buf = regs;
+
+ msg[1].addr = MENELAUS_I2C_ADDRESS;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = sizeof(regs);
+ msg[1].buf = regs;
+
+ status = i2c_transfer(the_menelaus->client->adapter, msg, 2);
+ if (status != 2) {
+ dev_err(dev, "%s error %d\n", "alarm read", status);
+ return -EIO;
+ }
+
+ menelaus_to_time(regs, &w->time);
+
+ w->enabled = !!(the_menelaus->rtc_control & RTC_CTRL_AL_EN);
+
+ /* NOTE we *could* check if actually pending... */
+ w->pending = 0;
+
+ return 0;
+}
+
+static int menelaus_set_alarm(struct device *dev, struct rtc_wkalrm *w)
+{
+ int status;
+
+ if (the_menelaus->client->irq <= 0 && w->enabled)
+ return -ENODEV;
+
+ /* clear previous alarm enable */
+ if (the_menelaus->rtc_control & RTC_CTRL_AL_EN) {
+ the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+ status = menelaus_write_reg(MENELAUS_RTC_CTRL,
+ the_menelaus->rtc_control);
+ if (status < 0)
+ return status;
+ }
+
+ /* write alarm registers */
+ status = time_to_menelaus(&w->time, MENELAUS_RTC_AL_SEC);
+ if (status < 0)
+ return status;
+
+ /* enable alarm if requested */
+ if (w->enabled) {
+ the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
+ status = menelaus_write_reg(MENELAUS_RTC_CTRL,
+ the_menelaus->rtc_control);
+ }
+
+ return status;
+}
+
+#ifdef CONFIG_RTC_INTF_DEV
+
+static void menelaus_rtc_update_work(struct menelaus_chip *m)
+{
+ /* report 1/sec update */
+ local_irq_disable();
+ rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_UF);
+ local_irq_enable();
+}
+
+static int menelaus_ioctl(struct device *dev, unsigned cmd, unsigned long arg)
+{
+ int status;
+
+ if (the_menelaus->client->irq <= 0)
+ return -ENOIOCTLCMD;
+
+ switch (cmd) {
+ /* alarm IRQ */
+ case RTC_AIE_ON:
+ if (the_menelaus->rtc_control & RTC_CTRL_AL_EN)
+ return 0;
+ the_menelaus->rtc_control |= RTC_CTRL_AL_EN;
+ break;
+ case RTC_AIE_OFF:
+ if (!(the_menelaus->rtc_control & RTC_CTRL_AL_EN))
+ return 0;
+ the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+ break;
+ /* 1/second "update" IRQ */
+ case RTC_UIE_ON:
+ if (the_menelaus->uie)
+ return 0;
+ status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
+ status = menelaus_add_irq_work(MENELAUS_RTCTMR_IRQ,
+ menelaus_rtc_update_work);
+ if (status == 0)
+ the_menelaus->uie = 1;
+ return status;
+ case RTC_UIE_OFF:
+ if (!the_menelaus->uie)
+ return 0;
+ status = menelaus_remove_irq_work(MENELAUS_RTCTMR_IRQ);
+ if (status == 0)
+ the_menelaus->uie = 0;
+ return status;
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
+}
+
+#else
+#define menelaus_ioctl NULL
+#endif
+
+/* REVISIT no compensation register support ... */
+
+static const struct rtc_class_ops menelaus_rtc_ops = {
+ .ioctl = menelaus_ioctl,
+ .read_time = menelaus_read_time,
+ .set_time = menelaus_set_time,
+ .read_alarm = menelaus_read_alarm,
+ .set_alarm = menelaus_set_alarm,
+};
+
+static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
+{
+ /* report alarm */
+ local_irq_disable();
+ rtc_update_irq(m->rtc, 1, RTC_IRQF | RTC_AF);
+ local_irq_enable();
+
+ /* then disable it; alarms are oneshot */
+ the_menelaus->rtc_control &= ~RTC_CTRL_AL_EN;
+ menelaus_write_reg(MENELAUS_RTC_CTRL, the_menelaus->rtc_control);
+}
+
+static inline void menelaus_rtc_init(struct menelaus_chip *m)
+{
+ int alarm = (m->client->irq > 0);
+
+ /* assume 32KDETEN pin is pulled high */
+ if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
+ dev_dbg(&m->client->dev, "no 32k oscillator\n");
+ return;
+ }
+
+ /* support RTC alarm; it can issue wakeups */
+ if (alarm) {
+ if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
+ menelaus_rtc_alarm_work) < 0) {
+ dev_err(&m->client->dev, "can't handle RTC alarm\n");
+ return;
+ }
+ device_init_wakeup(&m->client->dev, 1);
+ }
+
+ /* be sure RTC is enabled; allow 1/sec irqs; leave 12hr mode alone */
+ m->rtc_control = menelaus_read_reg(MENELAUS_RTC_CTRL);
+ if (!(m->rtc_control & RTC_CTRL_RTC_EN)
+ || (m->rtc_control & RTC_CTRL_AL_EN)
+ || (m->rtc_control & RTC_CTRL_EVERY_MASK)) {
+ if (!(m->rtc_control & RTC_CTRL_RTC_EN)) {
+ dev_warn(&m->client->dev, "rtc clock needs setting\n");
+ m->rtc_control |= RTC_CTRL_RTC_EN;
+ }
+ m->rtc_control &= ~RTC_CTRL_EVERY_MASK;
+ m->rtc_control &= ~RTC_CTRL_AL_EN;
+ menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
+ }
+
+ m->rtc = rtc_device_register(DRIVER_NAME,
+ &m->client->dev,
+ &menelaus_rtc_ops, THIS_MODULE);
+ if (IS_ERR(m->rtc)) {
+ if (alarm) {
+ menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
+ device_init_wakeup(&m->client->dev, 0);
+ }
+ dev_err(&m->client->dev, "can't register RTC: %d\n",
+ (int) PTR_ERR(m->rtc));
+ the_menelaus->rtc = NULL;
+ }
+}
+
+#else
+
+static inline void menelaus_rtc_init(struct menelaus_chip *m)
+{
+ /* nothing */
+}
+
+#endif
+
+/*-----------------------------------------------------------------------*/
+
+static struct i2c_driver menelaus_i2c_driver;
+
+static int menelaus_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct menelaus_chip *menelaus;
+ int rev = 0, val;
+ int err = 0;
+ struct menelaus_platform_data *menelaus_pdata =
+ client->dev.platform_data;
+
+ if (the_menelaus) {
+ dev_dbg(&client->dev, "only one %s for now\n",
+ DRIVER_NAME);
+ return -ENODEV;
+ }
+
+ menelaus = kzalloc(sizeof *menelaus, GFP_KERNEL);
+ if (!menelaus)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, menelaus);
+
+ the_menelaus = menelaus;
+ menelaus->client = client;
+
+ /* If a true probe check the device */
+ rev = menelaus_read_reg(MENELAUS_REV);
+ if (rev < 0) {
+ pr_err(DRIVER_NAME ": device not found");
+ err = -ENODEV;
+ goto fail1;
+ }
+
+ /* Ack and disable all Menelaus interrupts */
+ menelaus_write_reg(MENELAUS_INT_ACK1, 0xff);
+ menelaus_write_reg(MENELAUS_INT_ACK2, 0xff);
+ menelaus_write_reg(MENELAUS_INT_MASK1, 0xff);
+ menelaus_write_reg(MENELAUS_INT_MASK2, 0xff);
+ menelaus->mask1 = 0xff;
+ menelaus->mask2 = 0xff;
+
+ /* Set output buffer strengths */
+ menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
+
+ if (client->irq > 0) {
+ err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
+ DRIVER_NAME, menelaus);
+ if (err) {
+ dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
+ client->irq, err);
+ goto fail1;
+ }
+ }
+
+ mutex_init(&menelaus->lock);
+ INIT_WORK(&menelaus->work, menelaus_work);
+
+ pr_info("Menelaus rev %d.%d\n", rev >> 4, rev & 0x0f);
+
+ val = menelaus_read_reg(MENELAUS_VCORE_CTRL1);
+ if (val < 0)
+ goto fail2;
+ if (val & (1 << 7))
+ menelaus->vcore_hw_mode = 1;
+ else
+ menelaus->vcore_hw_mode = 0;
+
+ if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) {
+ err = menelaus_pdata->late_init(&client->dev);
+ if (err < 0)
+ goto fail2;
+ }
+
+ menelaus_rtc_init(menelaus);
+
+ return 0;
+fail2:
+ free_irq(client->irq, menelaus);
+ flush_scheduled_work();
+fail1:
+ kfree(menelaus);
+ return err;
+}
+
+static int __exit menelaus_remove(struct i2c_client *client)
+{
+ struct menelaus_chip *menelaus = i2c_get_clientdata(client);
+
+ free_irq(client->irq, menelaus);
+ kfree(menelaus);
+ i2c_set_clientdata(client, NULL);
+ the_menelaus = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id menelaus_id[] = {
+ { "menelaus", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, menelaus_id);
+
+static struct i2c_driver menelaus_i2c_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+ .probe = menelaus_probe,
+ .remove = __exit_p(menelaus_remove),
+ .id_table = menelaus_id,
+};
+
+static int __init menelaus_init(void)
+{
+ int res;
+
+ res = i2c_add_driver(&menelaus_i2c_driver);
+ if (res < 0) {
+ pr_err(DRIVER_NAME ": driver registration failed\n");
+ return res;
+ }
+
+ return 0;
+}
+
+static void __exit menelaus_exit(void)
+{
+ i2c_del_driver(&menelaus_i2c_driver);
+
+ /* FIXME: Shutdown menelaus parts that can be shut down */
+}
+
+MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
+MODULE_DESCRIPTION("I2C interface for Menelaus.");
+MODULE_LICENSE("GPL");
+
+module_init(menelaus_init);
+module_exit(menelaus_exit);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 6c0d1bec4b76..54ddf3772e0c 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -34,6 +34,7 @@ static int mfd_add_device(struct device *parent, int id,
goto fail_device;
pdev->dev.parent = parent;
+ platform_set_drvdata(pdev, cell->driver_data);
ret = platform_device_add_data(pdev,
cell->platform_data, cell->data_size);
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
new file mode 100644
index 000000000000..acf8b9d5f575
--- /dev/null
+++ b/drivers/mfd/tps65010.c
@@ -0,0 +1,1072 @@
+/*
+ * tps65010 - driver for tps6501x power management chips
+ *
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <asm/gpio.h>
+
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_VERSION "2 May 2005"
+#define DRIVER_NAME (tps65010_driver.driver.name)
+
+MODULE_DESCRIPTION("TPS6501x Power Management Driver");
+MODULE_LICENSE("GPL");
+
+static struct i2c_driver tps65010_driver;
+
+/*-------------------------------------------------------------------------*/
+
+/* This driver handles a family of multipurpose chips, which incorporate
+ * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
+ * and other features often needed in portable devices like cell phones
+ * or digital cameras.
+ *
+ * The tps65011 and tps65013 have different voltage settings compared
+ * to tps65010 and tps65012. The tps65013 has a NO_CHG status/irq.
+ * All except tps65010 have "wait" mode, possibly defaulted so that
+ * battery-insert != device-on.
+ *
+ * We could distinguish between some models by checking VDCDC1.UVLO or
+ * other registers, unless they've been changed already after powerup
+ * as part of board setup by a bootloader.
+ */
+enum tps_model {
+ TPS65010,
+ TPS65011,
+ TPS65012,
+ TPS65013,
+};
+
+struct tps65010 {
+ struct i2c_client *client;
+ struct mutex lock;
+ struct delayed_work work;
+ struct dentry *file;
+ unsigned charging:1;
+ unsigned por:1;
+ unsigned model:8;
+ u16 vbus;
+ unsigned long flags;
+#define FLAG_VBUS_CHANGED 0
+#define FLAG_IRQ_ENABLE 1
+
+ /* copies of last register state */
+ u8 chgstatus, regstatus, chgconf;
+ u8 nmask1, nmask2;
+
+ u8 outmask;
+ struct gpio_chip chip;
+ struct platform_device *leds;
+};
+
+#define POWER_POLL_DELAY msecs_to_jiffies(5000)
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(DEBUG) || defined(CONFIG_DEBUG_FS)
+
+static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
+{
+ snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
+ chgstatus,
+ (chgstatus & TPS_CHG_USB) ? " USB" : "",
+ (chgstatus & TPS_CHG_AC) ? " AC" : "",
+ (chgstatus & TPS_CHG_THERM) ? " therm" : "",
+ (chgstatus & TPS_CHG_TERM) ? " done" :
+ ((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+ ? " (charging)" : ""),
+ (chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
+ (chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
+ (chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
+ (chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
+}
+
+static void dbg_regstat(char *buf, size_t len, u8 regstatus)
+{
+ snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
+ regstatus,
+ (regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
+ (regstatus & TPS_REG_COVER) ? " uncover" : "",
+ (regstatus & TPS_REG_UVLO) ? " UVLO" : "",
+ (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
+ (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
+ (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
+ (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
+ (regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
+}
+
+static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
+{
+ const char *hibit;
+
+ if (por)
+ hibit = (chgconfig & TPS_CHARGE_POR)
+ ? "POR=69ms" : "POR=1sec";
+ else
+ hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
+
+ snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
+ chgconfig, hibit,
+ (chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
+ (chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
+ ({int p; switch ((chgconfig >> 3) & 3) {
+ case 3: p = 100; break;
+ case 2: p = 75; break;
+ case 1: p = 50; break;
+ default: p = 25; break;
+ }; p; }),
+ (chgconfig & TPS_VBUS_CHARGING)
+ ? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
+ : 0,
+ (chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
+}
+
+#endif
+
+#ifdef DEBUG
+
+static void show_chgstatus(const char *label, u8 chgstatus)
+{
+ char buf [100];
+
+ dbg_chgstat(buf, sizeof buf, chgstatus);
+ pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_regstatus(const char *label, u8 regstatus)
+{
+ char buf [100];
+
+ dbg_regstat(buf, sizeof buf, regstatus);
+ pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+static void show_chgconfig(int por, const char *label, u8 chgconfig)
+{
+ char buf [100];
+
+ dbg_chgconf(por, buf, sizeof buf, chgconfig);
+ pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
+}
+
+#else
+
+static inline void show_chgstatus(const char *label, u8 chgstatus) { }
+static inline void show_regstatus(const char *label, u8 chgstatus) { }
+static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
+
+#endif
+
+#ifdef CONFIG_DEBUG_FS
+
+static int dbg_show(struct seq_file *s, void *_)
+{
+ struct tps65010 *tps = s->private;
+ u8 value, v2;
+ unsigned i;
+ char buf[100];
+ const char *chip;
+
+ switch (tps->model) {
+ case TPS65010: chip = "tps65010"; break;
+ case TPS65011: chip = "tps65011"; break;
+ case TPS65012: chip = "tps65012"; break;
+ case TPS65013: chip = "tps65013"; break;
+ default: chip = NULL; break;
+ }
+ seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
+ DRIVER_NAME, DRIVER_VERSION, chip);
+
+ mutex_lock(&tps->lock);
+
+ /* FIXME how can we tell whether a battery is present?
+ * likely involves a charge gauging chip (like BQ26501).
+ */
+
+ seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
+
+
+ /* registers for monitoring battery charging and status; note
+ * that reading chgstat and regstat may ack IRQs...
+ */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+ dbg_chgconf(tps->por, buf, sizeof buf, value);
+ seq_printf(s, "chgconfig %s", buf);
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+ dbg_chgstat(buf, sizeof buf, value);
+ seq_printf(s, "chgstat %s", buf);
+ value = i2c_smbus_read_byte_data(tps->client, TPS_MASK1);
+ dbg_chgstat(buf, sizeof buf, value);
+ seq_printf(s, "mask1 %s", buf);
+ /* ignore ackint1 */
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+ dbg_regstat(buf, sizeof buf, value);
+ seq_printf(s, "regstat %s", buf);
+ value = i2c_smbus_read_byte_data(tps->client, TPS_MASK2);
+ dbg_regstat(buf, sizeof buf, value);
+ seq_printf(s, "mask2 %s\n", buf);
+ /* ignore ackint2 */
+
+ (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
+
+
+ /* VMAIN voltage, enable lowpower, etc */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC1);
+ seq_printf(s, "vdcdc1 %02x\n", value);
+
+ /* VCORE voltage, vibrator on/off */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_VDCDC2);
+ seq_printf(s, "vdcdc2 %02x\n", value);
+
+ /* both LD0s, and their lowpower behavior */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_VREGS1);
+ seq_printf(s, "vregs1 %02x\n\n", value);
+
+
+ /* LEDs and GPIOs */
+ value = i2c_smbus_read_byte_data(tps->client, TPS_LED1_ON);
+ v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED1_PER);
+ seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
+ (value & 0x80)
+ ? ((v2 & 0x80) ? "on" : "off")
+ : ((v2 & 0x80) ? "blink" : "(nPG)"),
+ value, v2,
+ (value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_LED2_ON);
+ v2 = i2c_smbus_read_byte_data(tps->client, TPS_LED2_PER);
+ seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
+ (value & 0x80)
+ ? ((v2 & 0x80) ? "on" : "off")
+ : ((v2 & 0x80) ? "blink" : "off"),
+ value, v2,
+ (value & 0x7f) * 10, (v2 & 0x7f) * 100);
+
+ value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+ v2 = i2c_smbus_read_byte_data(tps->client, TPS_MASK3);
+ seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
+
+ for (i = 0; i < 4; i++) {
+ if (value & (1 << (4 + i)))
+ seq_printf(s, " gpio%d-out %s\n", i + 1,
+ (value & (1 << i)) ? "low" : "hi ");
+ else
+ seq_printf(s, " gpio%d-in %s %s %s\n", i + 1,
+ (value & (1 << i)) ? "hi " : "low",
+ (v2 & (1 << i)) ? "no-irq" : "irq",
+ (v2 & (1 << (4 + i))) ? "rising" : "falling");
+ }
+
+ mutex_unlock(&tps->lock);
+ return 0;
+}
+
+static int dbg_tps_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dbg_show, inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+ .open = dbg_tps_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+#define DEBUG_FOPS &debug_fops
+
+#else
+#define DEBUG_FOPS NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* handle IRQS in a task context, so we can use I2C calls */
+static void tps65010_interrupt(struct tps65010 *tps)
+{
+ u8 tmp = 0, mask, poll;
+
+ /* IRQs won't trigger for certain events, but we can get
+ * others by polling (normally, with external power applied).
+ */
+ poll = 0;
+
+ /* regstatus irqs */
+ if (tps->nmask2) {
+ tmp = i2c_smbus_read_byte_data(tps->client, TPS_REGSTATUS);
+ mask = tmp ^ tps->regstatus;
+ tps->regstatus = tmp;
+ mask &= tps->nmask2;
+ } else
+ mask = 0;
+ if (mask) {
+ tps->regstatus = tmp;
+ /* may need to shut something down ... */
+
+ /* "off" usually means deep sleep */
+ if (tmp & TPS_REG_ONOFF) {
+ pr_info("%s: power off button\n", DRIVER_NAME);
+#if 0
+ /* REVISIT: this might need its own workqueue
+ * plus tweaks including deadlock avoidance ...
+ * also needs to get error handling and probably
+ * an #ifdef CONFIG_HIBERNATION
+ */
+ hibernate();
+#endif
+ poll = 1;
+ }
+ }
+
+ /* chgstatus irqs */
+ if (tps->nmask1) {
+ tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGSTATUS);
+ mask = tmp ^ tps->chgstatus;
+ tps->chgstatus = tmp;
+ mask &= tps->nmask1;
+ } else
+ mask = 0;
+ if (mask) {
+ unsigned charging = 0;
+
+ show_chgstatus("chg/irq", tmp);
+ if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
+ show_chgconfig(tps->por, "conf", tps->chgconf);
+
+ /* Unless it was turned off or disabled, we charge any
+ * battery whenever there's power available for it
+ * and the charger hasn't been disabled.
+ */
+ if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
+ && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+ && (tps->chgconf & TPS_CHARGE_ENABLE)
+ ) {
+ if (tps->chgstatus & TPS_CHG_USB) {
+ /* VBUS options are readonly until reconnect */
+ if (mask & TPS_CHG_USB)
+ set_bit(FLAG_VBUS_CHANGED, &tps->flags);
+ charging = 1;
+ } else if (tps->chgstatus & TPS_CHG_AC)
+ charging = 1;
+ }
+ if (charging != tps->charging) {
+ tps->charging = charging;
+ pr_info("%s: battery %scharging\n",
+ DRIVER_NAME, charging ? "" :
+ ((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
+ ? "NOT " : "dis"));
+ }
+ }
+
+ /* always poll to detect (a) power removal, without tps65013
+ * NO_CHG IRQ; or (b) restart of charging after stop.
+ */
+ if ((tps->model != TPS65013 || !tps->charging)
+ && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
+ poll = 1;
+ if (poll)
+ (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
+
+ /* also potentially gpio-in rise or fall */
+}
+
+/* handle IRQs and polling using keventd for now */
+static void tps65010_work(struct work_struct *work)
+{
+ struct tps65010 *tps;
+
+ tps = container_of(work, struct tps65010, work.work);
+ mutex_lock(&tps->lock);
+
+ tps65010_interrupt(tps);
+
+ if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
+ int status;
+ u8 chgconfig, tmp;
+
+ chgconfig = i2c_smbus_read_byte_data(tps->client,
+ TPS_CHGCONFIG);
+ chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
+ if (tps->vbus == 500)
+ chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
+ else if (tps->vbus >= 100)
+ chgconfig |= TPS_VBUS_CHARGING;
+
+ status = i2c_smbus_write_byte_data(tps->client,
+ TPS_CHGCONFIG, chgconfig);
+
+ /* vbus update fails unless VBUS is connected! */
+ tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);
+ tps->chgconf = tmp;
+ show_chgconfig(tps->por, "update vbus", tmp);
+ }
+
+ if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
+ enable_irq(tps->client->irq);
+
+ mutex_unlock(&tps->lock);
+}
+
+static irqreturn_t tps65010_irq(int irq, void *_tps)
+{
+ struct tps65010 *tps = _tps;
+
+ disable_irq_nosync(irq);
+ set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+ (void) schedule_work(&tps->work.work);
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* offsets 0..3 == GPIO1..GPIO4
+ * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ * offset 6 == vibrator motor driver
+ */
+static void
+tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (offset < 4)
+ tps65010_set_gpio_out_value(offset + 1, value);
+ else if (offset < 6)
+ tps65010_set_led(offset - 3, value ? ON : OFF);
+ else
+ tps65010_set_vib(value);
+}
+
+static int
+tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ /* GPIOs may be input-only */
+ if (offset < 4) {
+ struct tps65010 *tps;
+
+ tps = container_of(chip, struct tps65010, chip);
+ if (!(tps->outmask & (1 << offset)))
+ return -EINVAL;
+ tps65010_set_gpio_out_value(offset + 1, value);
+ } else if (offset < 6)
+ tps65010_set_led(offset - 3, value ? ON : OFF);
+ else
+ tps65010_set_vib(value);
+
+ return 0;
+}
+
+static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ int value;
+ struct tps65010 *tps;
+
+ tps = container_of(chip, struct tps65010, chip);
+
+ if (offset < 4) {
+ value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+ if (value < 0)
+ return 0;
+ if (value & (1 << (offset + 4))) /* output */
+ return !(value & (1 << offset));
+ else /* input */
+ return (value & (1 << offset));
+ }
+
+ /* REVISIT we *could* report LED1/nPG and LED2 state ... */
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct tps65010 *the_tps;
+
+static int __exit tps65010_remove(struct i2c_client *client)
+{
+ struct tps65010 *tps = i2c_get_clientdata(client);
+ struct tps65010_board *board = client->dev.platform_data;
+
+ if (board && board->teardown) {
+ int status = board->teardown(client, board->context);
+ if (status < 0)
+ dev_dbg(&client->dev, "board %s %s err %d\n",
+ "teardown", client->name, status);
+ }
+ if (client->irq > 0)
+ free_irq(client->irq, tps);
+ cancel_delayed_work(&tps->work);
+ flush_scheduled_work();
+ debugfs_remove(tps->file);
+ kfree(tps);
+ i2c_set_clientdata(client, NULL);
+ the_tps = NULL;
+ return 0;
+}
+
+static int tps65010_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tps65010 *tps;
+ int status;
+ struct tps65010_board *board = client->dev.platform_data;
+
+ if (the_tps) {
+ dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EINVAL;
+
+ tps = kzalloc(sizeof *tps, GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ mutex_init(&tps->lock);
+ INIT_DELAYED_WORK(&tps->work, tps65010_work);
+ tps->client = client;
+ tps->model = id->driver_data;
+
+ /* the IRQ is active low, but many gpio lines can't support that
+ * so this driver uses falling-edge triggers instead.
+ */
+ if (client->irq > 0) {
+ status = request_irq(client->irq, tps65010_irq,
+ IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING,
+ DRIVER_NAME, tps);
+ if (status < 0) {
+ dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
+ client->irq, status);
+ goto fail1;
+ }
+ /* annoying race here, ideally we'd have an option
+ * to claim the irq now and enable it later.
+ * FIXME genirq IRQF_NOAUTOEN now solves that ...
+ */
+ disable_irq(client->irq);
+ set_bit(FLAG_IRQ_ENABLE, &tps->flags);
+ } else
+ dev_warn(&client->dev, "IRQ not configured!\n");
+
+
+ switch (tps->model) {
+ case TPS65010:
+ case TPS65012:
+ tps->por = 1;
+ break;
+ /* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
+ }
+ tps->chgconf = i2c_smbus_read_byte_data(client, TPS_CHGCONFIG);
+ show_chgconfig(tps->por, "conf/init", tps->chgconf);
+
+ show_chgstatus("chg/init",
+ i2c_smbus_read_byte_data(client, TPS_CHGSTATUS));
+ show_regstatus("reg/init",
+ i2c_smbus_read_byte_data(client, TPS_REGSTATUS));
+
+ pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(client, TPS_VDCDC1),
+ i2c_smbus_read_byte_data(client, TPS_VDCDC2),
+ i2c_smbus_read_byte_data(client, TPS_VREGS1));
+ pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(client, TPS_DEFGPIO),
+ i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+ i2c_set_clientdata(client, tps);
+ the_tps = tps;
+
+#if defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
+ /* USB hosts can't draw VBUS. OTG devices could, later
+ * when OTG infrastructure enables it. USB peripherals
+ * could be relying on VBUS while booting, though.
+ */
+ tps->vbus = 100;
+#endif
+
+ /* unmask the "interesting" irqs, then poll once to
+ * kickstart monitoring, initialize shadowed status
+ * registers, and maybe disable VBUS draw.
+ */
+ tps->nmask1 = ~0;
+ (void) i2c_smbus_write_byte_data(client, TPS_MASK1, ~tps->nmask1);
+
+ tps->nmask2 = TPS_REG_ONOFF;
+ if (tps->model == TPS65013)
+ tps->nmask2 |= TPS_REG_NO_CHG;
+ (void) i2c_smbus_write_byte_data(client, TPS_MASK2, ~tps->nmask2);
+
+ (void) i2c_smbus_write_byte_data(client, TPS_MASK3, 0x0f
+ | i2c_smbus_read_byte_data(client, TPS_MASK3));
+
+ tps65010_work(&tps->work.work);
+
+ tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
+ tps, DEBUG_FOPS);
+
+ /* optionally register GPIOs */
+ if (board && board->base > 0) {
+ tps->outmask = board->outmask;
+
+ tps->chip.label = client->name;
+ tps->chip.dev = &client->dev;
+ tps->chip.owner = THIS_MODULE;
+
+ tps->chip.set = tps65010_gpio_set;
+ tps->chip.direction_output = tps65010_output;
+
+ /* NOTE: only partial support for inputs; nyet IRQs */
+ tps->chip.get = tps65010_gpio_get;
+
+ tps->chip.base = board->base;
+ tps->chip.ngpio = 7;
+ tps->chip.can_sleep = 1;
+
+ status = gpiochip_add(&tps->chip);
+ if (status < 0)
+ dev_err(&client->dev, "can't add gpiochip, err %d\n",
+ status);
+ else if (board->setup) {
+ status = board->setup(client, board->context);
+ if (status < 0) {
+ dev_dbg(&client->dev,
+ "board %s %s err %d\n",
+ "setup", client->name, status);
+ status = 0;
+ }
+ }
+ }
+
+ return 0;
+fail1:
+ kfree(tps);
+ return status;
+}
+
+static const struct i2c_device_id tps65010_id[] = {
+ { "tps65010", TPS65010 },
+ { "tps65011", TPS65011 },
+ { "tps65012", TPS65012 },
+ { "tps65013", TPS65013 },
+ { "tps65014", TPS65011 }, /* tps65011 charging at 6.5V max */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tps65010_id);
+
+static struct i2c_driver tps65010_driver = {
+ .driver = {
+ .name = "tps65010",
+ },
+ .probe = tps65010_probe,
+ .remove = __exit_p(tps65010_remove),
+ .id_table = tps65010_id,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Draw from VBUS:
+ * 0 mA -- DON'T DRAW (might supply power instead)
+ * 100 mA -- usb unit load (slowest charge rate)
+ * 500 mA -- usb high power (fast battery charge)
+ */
+int tps65010_set_vbus_draw(unsigned mA)
+{
+ unsigned long flags;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ /* assumes non-SMP */
+ local_irq_save(flags);
+ if (mA >= 500)
+ mA = 500;
+ else if (mA >= 100)
+ mA = 100;
+ else
+ mA = 0;
+ the_tps->vbus = mA;
+ if ((the_tps->chgstatus & TPS_CHG_USB)
+ && test_and_set_bit(
+ FLAG_VBUS_CHANGED, &the_tps->flags)) {
+ /* gadget drivers call this in_irq() */
+ (void) schedule_work(&the_tps->work.work);
+ }
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(tps65010_set_vbus_draw);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_gpio_out_value parameter:
+ * gpio: GPIO1, GPIO2, GPIO3 or GPIO4
+ * value: LOW or HIGH
+ */
+int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
+{
+ int status;
+ unsigned defgpio;
+
+ if (!the_tps)
+ return -ENODEV;
+ if ((gpio < GPIO1) || (gpio > GPIO4))
+ return -EINVAL;
+
+ mutex_lock(&the_tps->lock);
+
+ defgpio = i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO);
+
+ /* Configure GPIO for output */
+ defgpio |= 1 << (gpio + 3);
+
+ /* Writing 1 forces a logic 0 on that GPIO and vice versa */
+ switch (value) {
+ case LOW:
+ defgpio |= 1 << (gpio - 1); /* set GPIO low by writing 1 */
+ break;
+ /* case HIGH: */
+ default:
+ defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
+ break;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_DEFGPIO, defgpio);
+
+ pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
+ gpio, value ? "high" : "low",
+ i2c_smbus_read_byte_data(the_tps->client, TPS_DEFGPIO));
+
+ mutex_unlock(&the_tps->lock);
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_gpio_out_value);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_led parameter:
+ * led: LED1 or LED2
+ * mode: ON, OFF or BLINK
+ */
+int tps65010_set_led(unsigned led, unsigned mode)
+{
+ int status;
+ unsigned led_on, led_per, offs;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ if (led == LED1)
+ offs = 0;
+ else {
+ offs = 2;
+ led = LED2;
+ }
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client,
+ TPS_LED1_ON + offs));
+
+ pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client,
+ TPS_LED1_PER + offs));
+
+ switch (mode) {
+ case OFF:
+ led_on = 1 << 7;
+ led_per = 0 << 7;
+ break;
+ case ON:
+ led_on = 1 << 7;
+ led_per = 1 << 7;
+ break;
+ case BLINK:
+ led_on = 0x30 | (0 << 7);
+ led_per = 0x08 | (1 << 7);
+ break;
+ default:
+ printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
+ DRIVER_NAME);
+ mutex_unlock(&the_tps->lock);
+ return -EINVAL;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_LED1_ON + offs, led_on);
+
+ if (status != 0) {
+ printk(KERN_ERR "%s: Failed to write led%i_on register\n",
+ DRIVER_NAME, led);
+ mutex_unlock(&the_tps->lock);
+ return status;
+ }
+
+ pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_LED1_ON + offs));
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_LED1_PER + offs, led_per);
+
+ if (status != 0) {
+ printk(KERN_ERR "%s: Failed to write led%i_per register\n",
+ DRIVER_NAME, led);
+ mutex_unlock(&the_tps->lock);
+ return status;
+ }
+
+ pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led,
+ i2c_smbus_read_byte_data(the_tps->client,
+ TPS_LED1_PER + offs));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_led);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_vib parameter:
+ * value: ON or OFF
+ */
+int tps65010_set_vib(unsigned value)
+{
+ int status;
+ unsigned vdcdc2;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ vdcdc2 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC2);
+ vdcdc2 &= ~(1 << 1);
+ if (value)
+ vdcdc2 |= (1 << 1);
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VDCDC2, vdcdc2);
+
+ pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
+
+ mutex_unlock(&the_tps->lock);
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_vib);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+int tps65010_set_low_pwr(unsigned mode)
+{
+ int status;
+ unsigned vdcdc1;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
+ mode ? "enable" : "disable",
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+ switch (mode) {
+ case OFF:
+ vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+ break;
+ /* case ON: */
+ default:
+ vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
+ break;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VDCDC1, vdcdc1);
+
+ if (status != 0)
+ printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+ DRIVER_NAME);
+ else
+ pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65010_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+/* tps65010_config_vregs1 parameter:
+ * value to be written to VREGS1 register
+ * Note: The complete register is written, set all bits you need
+ */
+int tps65010_config_vregs1(unsigned value)
+{
+ int status;
+
+ if (!the_tps)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VREGS1, value);
+
+ if (status != 0)
+ printk(KERN_ERR "%s: Failed to write vregs1 register\n",
+ DRIVER_NAME);
+ else
+ pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VREGS1));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65010_config_vregs1);
+
+/*-------------------------------------------------------------------------*/
+/* tps65013_set_low_pwr parameter:
+ * mode: ON or OFF
+ */
+
+/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
+ required if power supply is through a battery */
+
+int tps65013_set_low_pwr(unsigned mode)
+{
+ int status;
+ unsigned vdcdc1, chgconfig;
+
+ if (!the_tps || the_tps->por)
+ return -ENODEV;
+
+ mutex_lock(&the_tps->lock);
+
+ pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
+ DRIVER_NAME,
+ mode ? "enable" : "disable",
+ i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG),
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+ vdcdc1 = i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1);
+
+ switch (mode) {
+ case OFF:
+ chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
+ vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
+ break;
+ /* case ON: */
+ default:
+ chgconfig |= TPS65013_AUA; /* enable AUA bit */
+ vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
+ break;
+ }
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_CHGCONFIG, chgconfig);
+ if (status != 0) {
+ printk(KERN_ERR "%s: Failed to write chconfig register\n",
+ DRIVER_NAME);
+ mutex_unlock(&the_tps->lock);
+ return status;
+ }
+
+ chgconfig = i2c_smbus_read_byte_data(the_tps->client, TPS_CHGCONFIG);
+ the_tps->chgconf = chgconfig;
+ show_chgconfig(0, "chgconf", chgconfig);
+
+ status = i2c_smbus_write_byte_data(the_tps->client,
+ TPS_VDCDC1, vdcdc1);
+
+ if (status != 0)
+ printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
+ DRIVER_NAME);
+ else
+ pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
+ i2c_smbus_read_byte_data(the_tps->client, TPS_VDCDC1));
+
+ mutex_unlock(&the_tps->lock);
+
+ return status;
+}
+EXPORT_SYMBOL(tps65013_set_low_pwr);
+
+/*-------------------------------------------------------------------------*/
+
+static int __init tps_init(void)
+{
+ u32 tries = 3;
+ int status = -ENODEV;
+
+ printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION);
+
+ /* some boards have startup glitches */
+ while (tries--) {
+ status = i2c_add_driver(&tps65010_driver);
+ if (the_tps)
+ break;
+ i2c_del_driver(&tps65010_driver);
+ if (!tries) {
+ printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME);
+ return -ENODEV;
+ }
+ pr_debug("%s: re-probe ...\n", DRIVER_NAME);
+ msleep(10);
+ }
+
+ return status;
+}
+/* NOTE: this MUST be initialized before the other parts of the system
+ * that rely on it ... but after the i2c bus on which this relies.
+ * That is, much earlier than on PC-type systems, which don't often use
+ * I2C as a core system bus.
+ */
+subsys_initcall(tps_init);
+
+static void __exit tps_exit(void)
+{
+ i2c_del_driver(&tps65010_driver);
+}
+module_exit(tps_exit);
+
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index dd843c4fbcc7..b59c385cbc12 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -33,6 +33,8 @@
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/regulator/machine.h>
+
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
@@ -71,6 +73,13 @@
#define twl_has_gpio() false
#endif
+#if defined(CONFIG_REGULATOR_TWL4030) \
+ || defined(CONFIG_REGULATOR_TWL4030_MODULE)
+#define twl_has_regulator() true
+#else
+#define twl_has_regulator() false
+#endif
+
#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE)
#define twl_has_madc() true
#else
@@ -149,6 +158,10 @@
#define HIGH_PERF_SQ (1 << 3)
+/* chip-specific feature flags, for i2c_device_id.driver_data */
+#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
+#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
+
/*----------------------------------------------------------------------*/
/* is driver active, bound to a chip? */
@@ -225,7 +238,7 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
*
* Returns the result of operation - 0 is success
*/
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
{
int ret;
int sid;
@@ -274,7 +287,7 @@ EXPORT_SYMBOL(twl4030_i2c_write);
*
* Returns result of operation - num_bytes is success else failure.
*/
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes)
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
{
int ret;
u8 val;
@@ -352,258 +365,258 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8);
/*----------------------------------------------------------------------*/
-/*
- * NOTE: We know the first 8 IRQs after pdata->base_irq are
- * for the PIH, and the next are for the PWR_INT SIH, since
- * that's how twl_init_irq() sets things up.
- */
-
-static int add_children(struct twl4030_platform_data *pdata)
+static struct device *
+add_numbered_child(unsigned chip, const char *name, int num,
+ void *pdata, unsigned pdata_len,
+ bool can_wakeup, int irq0, int irq1)
{
- struct platform_device *pdev = NULL;
- struct twl4030_client *twl = NULL;
- int status = 0;
+ struct platform_device *pdev;
+ struct twl4030_client *twl = &twl4030_modules[chip];
+ int status;
+
+ pdev = platform_device_alloc(name, num);
+ if (!pdev) {
+ dev_dbg(&twl->client->dev, "can't alloc dev\n");
+ status = -ENOMEM;
+ goto err;
+ }
- if (twl_has_bci() && pdata->bci) {
- twl = &twl4030_modules[3];
+ device_init_wakeup(&pdev->dev, can_wakeup);
+ pdev->dev.parent = &twl->client->dev;
- pdev = platform_device_alloc("twl4030_bci", -1);
- if (!pdev) {
- pr_debug("%s: can't alloc bci dev\n", DRIVER_NAME);
- status = -ENOMEM;
+ if (pdata) {
+ status = platform_device_add_data(pdev, pdata, pdata_len);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "can't add platform_data\n");
goto err;
}
+ }
- if (status == 0) {
- pdev->dev.parent = &twl->client->dev;
- status = platform_device_add_data(pdev, pdata->bci,
- sizeof(*pdata->bci));
- if (status < 0) {
- dev_dbg(&twl->client->dev,
- "can't add bci data, %d\n",
- status);
- goto err;
- }
- }
-
- if (status == 0) {
- struct resource r = {
- .start = pdata->irq_base + 8 + 1,
- .flags = IORESOURCE_IRQ,
- };
-
- status = platform_device_add_resources(pdev, &r, 1);
- }
-
- if (status == 0)
- status = platform_device_add(pdev);
+ if (irq0) {
+ struct resource r[2] = {
+ { .start = irq0, .flags = IORESOURCE_IRQ, },
+ { .start = irq1, .flags = IORESOURCE_IRQ, },
+ };
+ status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't create bci dev, %d\n",
- status);
+ dev_dbg(&pdev->dev, "can't add irqs\n");
goto err;
}
}
- if (twl_has_gpio() && pdata->gpio) {
- twl = &twl4030_modules[1];
+ status = platform_device_add(pdev);
- pdev = platform_device_alloc("twl4030_gpio", -1);
- if (!pdev) {
- pr_debug("%s: can't alloc gpio dev\n", DRIVER_NAME);
- status = -ENOMEM;
- goto err;
- }
+err:
+ if (status < 0) {
+ platform_device_put(pdev);
+ dev_err(&twl->client->dev, "can't add %s dev\n", name);
+ return ERR_PTR(status);
+ }
+ return &pdev->dev;
+}
- /* more driver model init */
- if (status == 0) {
- pdev->dev.parent = &twl->client->dev;
- /* device_init_wakeup(&pdev->dev, 1); */
-
- status = platform_device_add_data(pdev, pdata->gpio,
- sizeof(*pdata->gpio));
- if (status < 0) {
- dev_dbg(&twl->client->dev,
- "can't add gpio data, %d\n",
- status);
- goto err;
- }
- }
+static inline struct device *add_child(unsigned chip, const char *name,
+ void *pdata, unsigned pdata_len,
+ bool can_wakeup, int irq0, int irq1)
+{
+ return add_numbered_child(chip, name, -1, pdata, pdata_len,
+ can_wakeup, irq0, irq1);
+}
- /* GPIO module IRQ */
- if (status == 0) {
- struct resource r = {
- .start = pdata->irq_base + 0,
- .flags = IORESOURCE_IRQ,
- };
+static struct device *
+add_regulator_linked(int num, struct regulator_init_data *pdata,
+ struct regulator_consumer_supply *consumers,
+ unsigned num_consumers)
+{
+ /* regulator framework demands init_data ... */
+ if (!pdata)
+ return NULL;
- status = platform_device_add_resources(pdev, &r, 1);
- }
+ if (consumers) {
+ pdata->consumer_supplies = consumers;
+ pdata->num_consumer_supplies = num_consumers;
+ }
- if (status == 0)
- status = platform_device_add(pdev);
+ /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */
+ return add_numbered_child(3, "twl4030_reg", num,
+ pdata, sizeof(*pdata), false, 0, 0);
+}
- if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't create gpio dev, %d\n",
- status);
- goto err;
- }
+static struct device *
+add_regulator(int num, struct regulator_init_data *pdata)
+{
+ return add_regulator_linked(num, pdata, NULL, 0);
+}
+
+/*
+ * NOTE: We know the first 8 IRQs after pdata->base_irq are
+ * for the PIH, and the next are for the PWR_INT SIH, since
+ * that's how twl_init_irq() sets things up.
+ */
+
+static int
+add_children(struct twl4030_platform_data *pdata, unsigned long features)
+{
+ struct device *child;
+ struct device *usb_transceiver = NULL;
+
+ if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
+ child = add_child(3, "twl4030_bci",
+ pdata->bci, sizeof(*pdata->bci),
+ false,
+ /* irq0 = CHG_PRES, irq1 = BCI */
+ pdata->irq_base + 8 + 1, pdata->irq_base + 2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_gpio() && pdata->gpio) {
+ child = add_child(1, "twl4030_gpio",
+ pdata->gpio, sizeof(*pdata->gpio),
+ false, pdata->irq_base + 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
}
if (twl_has_keypad() && pdata->keypad) {
- pdev = platform_device_alloc("twl4030_keypad", -1);
- if (pdev) {
- twl = &twl4030_modules[2];
- pdev->dev.parent = &twl->client->dev;
- device_init_wakeup(&pdev->dev, 1);
- status = platform_device_add_data(pdev, pdata->keypad,
- sizeof(*pdata->keypad));
- if (status < 0) {
- dev_dbg(&twl->client->dev,
- "can't add keypad data, %d\n",
- status);
- platform_device_put(pdev);
- goto err;
- }
- status = platform_device_add(pdev);
- if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't create keypad dev, %d\n",
- status);
- goto err;
- }
- } else {
- pr_debug("%s: can't alloc keypad dev\n", DRIVER_NAME);
- status = -ENOMEM;
- goto err;
- }
+ child = add_child(2, "twl4030_keypad",
+ pdata->keypad, sizeof(*pdata->keypad),
+ true, pdata->irq_base + 1, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
}
if (twl_has_madc() && pdata->madc) {
- pdev = platform_device_alloc("twl4030_madc", -1);
- if (pdev) {
- twl = &twl4030_modules[2];
- pdev->dev.parent = &twl->client->dev;
- device_init_wakeup(&pdev->dev, 1);
- status = platform_device_add_data(pdev, pdata->madc,
- sizeof(*pdata->madc));
- if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't add madc data, %d\n",
- status);
- goto err;
- }
- status = platform_device_add(pdev);
- if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't create madc dev, %d\n",
- status);
- goto err;
- }
- } else {
- pr_debug("%s: can't alloc madc dev\n", DRIVER_NAME);
- status = -ENOMEM;
- goto err;
- }
+ child = add_child(2, "twl4030_madc",
+ pdata->madc, sizeof(*pdata->madc),
+ true, pdata->irq_base + 3, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
}
if (twl_has_rtc()) {
- twl = &twl4030_modules[3];
-
- pdev = platform_device_alloc("twl4030_rtc", -1);
- if (!pdev) {
- pr_debug("%s: can't alloc rtc dev\n", DRIVER_NAME);
- status = -ENOMEM;
- } else {
- pdev->dev.parent = &twl->client->dev;
- device_init_wakeup(&pdev->dev, 1);
- }
-
/*
- * REVISIT platform_data here currently might use of
+ * REVISIT platform_data here currently might expose the
* "msecure" line ... but for now we just expect board
- * setup to tell the chip "we are secure" at all times.
+ * setup to tell the chip "it's always ok to SET_TIME".
* Eventually, Linux might become more aware of such
* HW security concerns, and "least privilege".
*/
-
- /* RTC module IRQ */
- if (status == 0) {
- struct resource r = {
- .start = pdata->irq_base + 8 + 3,
- .flags = IORESOURCE_IRQ,
- };
-
- status = platform_device_add_resources(pdev, &r, 1);
- }
-
- if (status == 0)
- status = platform_device_add(pdev);
-
- if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't create rtc dev, %d\n",
- status);
- goto err;
- }
+ child = add_child(3, "twl4030_rtc",
+ NULL, 0,
+ true, pdata->irq_base + 8 + 3, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
}
if (twl_has_usb() && pdata->usb) {
- twl = &twl4030_modules[0];
-
- pdev = platform_device_alloc("twl4030_usb", -1);
- if (!pdev) {
- pr_debug("%s: can't alloc usb dev\n", DRIVER_NAME);
- status = -ENOMEM;
- goto err;
- }
-
- if (status == 0) {
- pdev->dev.parent = &twl->client->dev;
- device_init_wakeup(&pdev->dev, 1);
- status = platform_device_add_data(pdev, pdata->usb,
- sizeof(*pdata->usb));
- if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't add usb data, %d\n",
- status);
- goto err;
- }
- }
-
- if (status == 0) {
- struct resource r = {
- .start = pdata->irq_base + 8 + 2,
- .flags = IORESOURCE_IRQ,
- };
+ child = add_child(0, "twl4030_usb",
+ pdata->usb, sizeof(*pdata->usb),
+ true,
+ /* irq0 = USB_PRES, irq1 = USB */
+ pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ /* we need to connect regulators to this transceiver */
+ usb_transceiver = child;
+ }
- status = platform_device_add_resources(pdev, &r, 1);
- }
+ if (twl_has_regulator()) {
+ /*
+ child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ */
+
+ child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VDAC, pdata->vdac);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator((features & TWL4030_VAUX2)
+ ? TWL4030_REG_VAUX2_4030
+ : TWL4030_REG_VAUX2,
+ pdata->vaux2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
- if (status == 0)
- status = platform_device_add(pdev);
+ if (twl_has_regulator() && usb_transceiver) {
+ static struct regulator_consumer_supply usb1v5 = {
+ .supply = "usb1v5",
+ };
+ static struct regulator_consumer_supply usb1v8 = {
+ .supply = "usb1v8",
+ };
+ static struct regulator_consumer_supply usb3v1 = {
+ .supply = "usb3v1",
+ };
+
+ /* this is a template that gets copied */
+ struct regulator_init_data usb_fixed = {
+ .constraints.valid_modes_mask =
+ REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .constraints.valid_ops_mask =
+ REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ };
+
+ usb1v5.dev = usb_transceiver;
+ usb1v8.dev = usb_transceiver;
+ usb3v1.dev = usb_transceiver;
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
+ &usb1v5, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed,
+ &usb1v8, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed,
+ &usb3v1, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
- if (status < 0) {
- platform_device_put(pdev);
- dev_dbg(&twl->client->dev,
- "can't create usb dev, %d\n",
- status);
- }
+ /* maybe add LDOs that are omitted on cost-reduced parts */
+ if (twl_has_regulator() && !(features & TPS_SUBSET)) {
+ /*
+ child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ */
+
+ child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VSIM, pdata->vsim);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
}
-err:
- if (status)
- pr_err("failed to add twl4030's children (status %d)\n", status);
- return status;
+ return 0;
}
/*----------------------------------------------------------------------*/
@@ -645,12 +658,7 @@ static void __init clocks_init(void)
osc = clk_get(NULL, "osc_ck");
else
osc = clk_get(NULL, "osc_sys_ck");
-#else
- /* REVISIT for non-OMAP systems, pass the clock rate from
- * board init code, using platform_data.
- */
- osc = ERR_PTR(-EIO);
-#endif
+
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl4030 internal clock init and "
"using bootloader value (unknown osc rate)\n");
@@ -660,6 +668,18 @@ static void __init clocks_init(void)
rate = clk_get_rate(osc);
clk_put(osc);
+#else
+ /* REVISIT for non-OMAP systems, pass the clock rate from
+ * board init code, using platform_data.
+ */
+ osc = ERR_PTR(-EIO);
+
+ printk(KERN_WARNING "Skipping twl4030 internal clock init and "
+ "using bootloader value (unknown osc rate)\n");
+
+ return;
+#endif
+
switch (rate) {
case 19200000:
ctrl = HFCLK_FREQ_19p2_MHZ;
@@ -764,7 +784,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
goto fail;
}
- status = add_children(pdata);
+ status = add_children(pdata, id->driver_data);
fail:
if (status < 0)
twl4030_remove(client);
@@ -772,11 +792,11 @@ fail:
}
static const struct i2c_device_id twl4030_ids[] = {
- { "twl4030", 0 }, /* "Triton 2" */
- { "tps65950", 0 }, /* catalog version of twl4030 */
- { "tps65930", 0 }, /* fewer LDOs and DACs; no charger */
- { "tps65920", 0 }, /* fewer LDOs; no codec or charger */
- { "twl5030", 0 }, /* T2 updated */
+ { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
+ { "twl5030", 0 }, /* T2 updated */
+ { "tps65950", 0 }, /* catalog version of twl5030 */
+ { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
+ { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(i2c, twl4030_ids);
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index fae868a8d499..b10876036983 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -180,10 +180,15 @@ static struct completion irq_event;
static int twl4030_irq_thread(void *data)
{
long irq = (long)data;
- irq_desc_t *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
static unsigned i2c_errors;
const static unsigned max_i2c_errors = 100;
+ if (!desc) {
+ pr_err("twl4030: Invalid IRQ: %ld\n", irq);
+ return -EINVAL;
+ }
+
current->flags |= PF_NOFREEZE;
while (!kthread_should_stop()) {
@@ -215,7 +220,13 @@ static int twl4030_irq_thread(void *data)
pih_isr;
pih_isr >>= 1, module_irq++) {
if (pih_isr & 0x1) {
- irq_desc_t *d = irq_desc + module_irq;
+ struct irq_desc *d = irq_to_desc(module_irq);
+
+ if (!d) {
+ pr_err("twl4030: Invalid SIH IRQ: %d\n",
+ module_irq);
+ return -EINVAL;
+ }
/* These can't be masked ... always warn
* if we get any surprises.
@@ -452,10 +463,16 @@ static void twl4030_sih_do_edge(struct work_struct *work)
/* Modify only the bits we know must change */
while (edge_change) {
int i = fls(edge_change) - 1;
- struct irq_desc *d = irq_desc + i + agent->irq_base;
+ struct irq_desc *d = irq_to_desc(i + agent->irq_base);
int byte = 1 + (i >> 2);
int off = (i & 0x3) * 2;
+ if (!d) {
+ pr_err("twl4030: Invalid IRQ: %d\n",
+ i + agent->irq_base);
+ return;
+ }
+
bytes[byte] &= ~(0x03 << off);
spin_lock_irq(&d->lock);
@@ -512,9 +529,14 @@ static void twl4030_sih_unmask(unsigned irq)
static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
{
struct sih_agent *sih = get_irq_chip_data(irq);
- struct irq_desc *desc = irq_desc + irq;
+ struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
+ if (!desc) {
+ pr_err("twl4030: Invalid IRQ: %d\n", irq);
+ return -EINVAL;
+ }
+
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 0d47fb9e4b3b..3a273ccef3f2 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -63,7 +63,6 @@
*/
static DEFINE_MUTEX(io_mutex);
static DEFINE_MUTEX(reg_lock_mutex);
-static DEFINE_MUTEX(auxadc_mutex);
/* Perform a physical read from the device.
*/
@@ -299,6 +298,13 @@ int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
}
EXPORT_SYMBOL_GPL(wm8350_block_write);
+/**
+ * wm8350_reg_lock()
+ *
+ * The WM8350 has a hardware lock which can be used to prevent writes to
+ * some registers (generally those which can cause particularly serious
+ * problems if misused). This function enables that lock.
+ */
int wm8350_reg_lock(struct wm8350 *wm8350)
{
u16 key = WM8350_LOCK_KEY;
@@ -314,6 +320,15 @@ int wm8350_reg_lock(struct wm8350 *wm8350)
}
EXPORT_SYMBOL_GPL(wm8350_reg_lock);
+/**
+ * wm8350_reg_unlock()
+ *
+ * The WM8350 has a hardware lock which can be used to prevent writes to
+ * some registers (generally those which can cause particularly serious
+ * problems if misused). This function disables that lock so updates
+ * can be performed. For maximum safety this should be done only when
+ * required.
+ */
int wm8350_reg_unlock(struct wm8350 *wm8350)
{
u16 key = WM8350_UNLOCK_KEY;
@@ -1066,38 +1081,158 @@ int wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
}
EXPORT_SYMBOL_GPL(wm8350_unmask_irq);
+int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
+{
+ u16 reg, result = 0;
+ int tries = 5;
+
+ if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
+ return -EINVAL;
+ if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
+ && (scale != 0 || vref != 0))
+ return -EINVAL;
+
+ mutex_lock(&wm8350->auxadc_mutex);
+
+ /* Turn on the ADC */
+ reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
+
+ if (scale || vref) {
+ reg = scale << 13;
+ reg |= vref << 12;
+ wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
+ }
+
+ reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+ reg |= 1 << channel | WM8350_AUXADC_POLL;
+ wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
+
+ do {
+ schedule_timeout_interruptible(1);
+ reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
+ } while (tries-- && (reg & WM8350_AUXADC_POLL));
+
+ if (!tries)
+ dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
+ else
+ result = wm8350_reg_read(wm8350,
+ WM8350_AUX1_READBACK + channel);
+
+ /* Turn off the ADC */
+ reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
+ reg & ~WM8350_AUXADC_ENA);
+
+ mutex_unlock(&wm8350->auxadc_mutex);
+
+ return result & WM8350_AUXADC_DATA1_MASK;
+}
+EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
+
/*
* Cache is always host endian.
*/
-static int wm8350_create_cache(struct wm8350 *wm8350, int mode)
+static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
{
int i, ret = 0;
u16 value;
const u16 *reg_map;
- switch (mode) {
-#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+ switch (type) {
case 0:
- reg_map = wm8350_mode0_defaults;
- break;
+ switch (mode) {
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+ case 0:
+ reg_map = wm8350_mode0_defaults;
+ break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
- case 1:
- reg_map = wm8350_mode1_defaults;
- break;
+ case 1:
+ reg_map = wm8350_mode1_defaults;
+ break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
- case 2:
- reg_map = wm8350_mode2_defaults;
- break;
+ case 2:
+ reg_map = wm8350_mode2_defaults;
+ break;
#endif
#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
- case 3:
- reg_map = wm8350_mode3_defaults;
+ case 3:
+ reg_map = wm8350_mode3_defaults;
+ break;
+#endif
+ default:
+ dev_err(wm8350->dev,
+ "WM8350 configuration mode %d not supported\n",
+ mode);
+ return -EINVAL;
+ }
+ break;
+
+ case 1:
+ switch (mode) {
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
+ case 0:
+ reg_map = wm8351_mode0_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
+ case 1:
+ reg_map = wm8351_mode1_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
+ case 2:
+ reg_map = wm8351_mode2_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
+ case 3:
+ reg_map = wm8351_mode3_defaults;
+ break;
+#endif
+ default:
+ dev_err(wm8350->dev,
+ "WM8351 configuration mode %d not supported\n",
+ mode);
+ return -EINVAL;
+ }
break;
+
+ case 2:
+ switch (mode) {
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
+ case 0:
+ reg_map = wm8352_mode0_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
+ case 1:
+ reg_map = wm8352_mode1_defaults;
+ break;
#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
+ case 2:
+ reg_map = wm8352_mode2_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
+ case 3:
+ reg_map = wm8352_mode3_defaults;
+ break;
+#endif
+ default:
+ dev_err(wm8350->dev,
+ "WM8352 configuration mode %d not supported\n",
+ mode);
+ return -EINVAL;
+ }
+ break;
+
default:
- dev_err(wm8350->dev, "Configuration mode %d not supported\n",
+ dev_err(wm8350->dev,
+ "WM835x configuration mode %d not supported\n",
mode);
return -EINVAL;
}
@@ -1163,53 +1298,113 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
struct wm8350_platform_data *pdata)
{
int ret = -EINVAL;
- u16 id1, id2, mask, mode;
+ u16 id1, id2, mask_rev;
+ u16 cust_id, mode, chip_rev;
/* get WM8350 revision and config mode */
wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+ wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
id1 = be16_to_cpu(id1);
id2 = be16_to_cpu(id2);
+ mask_rev = be16_to_cpu(mask_rev);
- if (id1 == 0x6143) {
- switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) {
+ if (id1 != 0x6143) {
+ dev_err(wm8350->dev,
+ "Device with ID %x is not a WM8350\n", id1);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ mode = id2 & WM8350_CONF_STS_MASK >> 10;
+ cust_id = id2 & WM8350_CUST_ID_MASK;
+ chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
+ dev_info(wm8350->dev,
+ "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
+ mode, cust_id, mask_rev, chip_rev);
+
+ if (cust_id != 0) {
+ dev_err(wm8350->dev, "Unsupported CUST_ID\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ switch (mask_rev) {
+ case 0:
+ wm8350->pmic.max_dcdc = WM8350_DCDC_6;
+ wm8350->pmic.max_isink = WM8350_ISINK_B;
+
+ switch (chip_rev) {
case WM8350_REV_E:
- dev_info(wm8350->dev, "Found Rev E device\n");
- wm8350->rev = WM8350_REV_E;
+ dev_info(wm8350->dev, "WM8350 Rev E\n");
break;
case WM8350_REV_F:
- dev_info(wm8350->dev, "Found Rev F device\n");
- wm8350->rev = WM8350_REV_F;
+ dev_info(wm8350->dev, "WM8350 Rev F\n");
break;
case WM8350_REV_G:
- dev_info(wm8350->dev, "Found Rev G device\n");
- wm8350->rev = WM8350_REV_G;
+ dev_info(wm8350->dev, "WM8350 Rev G\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+ case WM8350_REV_H:
+ dev_info(wm8350->dev, "WM8350 Rev H\n");
+ wm8350->power.rev_g_coeff = 1;
break;
default:
/* For safety we refuse to run on unknown hardware */
- dev_info(wm8350->dev, "Found unknown rev\n");
+ dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
ret = -ENODEV;
goto err;
}
- } else {
- dev_info(wm8350->dev, "Device with ID %x is not a WM8350\n",
- id1);
+ break;
+
+ case 1:
+ wm8350->pmic.max_dcdc = WM8350_DCDC_4;
+ wm8350->pmic.max_isink = WM8350_ISINK_A;
+
+ switch (chip_rev) {
+ case 0:
+ dev_info(wm8350->dev, "WM8351 Rev A\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ break;
+
+ case 2:
+ wm8350->pmic.max_dcdc = WM8350_DCDC_6;
+ wm8350->pmic.max_isink = WM8350_ISINK_B;
+
+ switch (chip_rev) {
+ case 0:
+ dev_info(wm8350->dev, "WM8352 Rev A\n");
+ wm8350->power.rev_g_coeff = 1;
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown MASK_REV\n");
ret = -ENODEV;
goto err;
}
- mode = id2 & WM8350_CONF_STS_MASK >> 10;
- mask = id2 & WM8350_CUST_ID_MASK;
- dev_info(wm8350->dev, "Config mode %d, ROM mask %d\n", mode, mask);
-
- ret = wm8350_create_cache(wm8350, mode);
+ ret = wm8350_create_cache(wm8350, mask_rev, mode);
if (ret < 0) {
- printk(KERN_ERR "wm8350: failed to create register cache\n");
+ dev_err(wm8350->dev, "Failed to create register cache\n");
return ret;
}
- if (pdata->init) {
+ if (pdata && pdata->init) {
ret = pdata->init(wm8350);
if (ret != 0) {
dev_err(wm8350->dev, "Platform init() failed: %d\n",
@@ -1218,6 +1413,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
}
}
+ mutex_init(&wm8350->auxadc_mutex);
mutex_init(&wm8350->irq_mutex);
INIT_WORK(&wm8350->irq_work, wm8350_irq_worker);
if (irq) {
diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c
index 3e0ce0e50ea2..8d8c93217572 100644
--- a/drivers/mfd/wm8350-i2c.c
+++ b/drivers/mfd/wm8350-i2c.c
@@ -1,8 +1,6 @@
/*
* wm8350-i2c.c -- Generic I2C driver for Wolfson WM8350 PMIC
*
- * This driver defines and configures the WM8350 for the Freescale i.MX32ADS.
- *
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
*
* Author: Liam Girdwood
@@ -99,6 +97,8 @@ static int wm8350_i2c_remove(struct i2c_client *i2c)
static const struct i2c_device_id wm8350_i2c_id[] = {
{ "wm8350", 0 },
+ { "wm8351", 0 },
+ { "wm8352", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id);
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 974678db22cd..68887b817d17 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -1074,6 +1074,2102 @@ const u16 wm8350_mode3_defaults[] = {
};
#endif
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode0_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0001, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0004, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0FFC, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFC, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0013, /* R140 - GPIO Function Select 1 */
+ 0x0000, /* R141 - GPIO Function Select 2 */
+ 0x0000, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 */
+ 0x0000, /* R175 */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0000, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0000, /* R186 - DCDC3 Control */
+ 0x0000, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0000, /* R189 - DCDC4 Control */
+ 0x0000, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 */
+ 0x0000, /* R193 */
+ 0x0000, /* R194 */
+ 0x0000, /* R195 */
+ 0x0000, /* R196 */
+ 0x0006, /* R197 */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x001B, /* R203 - LDO2 Control */
+ 0x0000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001B, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001B, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 - FLL Test 1 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x1000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode1_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0001, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0CFB, /* R134 - GPIO Configuration (i/o) */
+ 0x0C1F, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0300, /* R140 - GPIO Function Select 1 */
+ 0x1110, /* R141 - GPIO Function Select 2 */
+ 0x0013, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 */
+ 0x0000, /* R175 */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0C00, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0026, /* R186 - DCDC3 Control */
+ 0x0400, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0062, /* R189 - DCDC4 Control */
+ 0x0800, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 */
+ 0x0000, /* R193 */
+ 0x0000, /* R194 */
+ 0x000A, /* R195 */
+ 0x1000, /* R196 */
+ 0x0006, /* R197 */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x0006, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0010, /* R203 - LDO2 Control */
+ 0x0C00, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001F, /* R206 - LDO3 Control */
+ 0x0800, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x000A, /* R209 - LDO4 Control */
+ 0x0800, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 - FLL Test 1 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x1000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x1000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode2_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0001, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0214, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0110, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x09FA, /* R134 - GPIO Configuration (i/o) */
+ 0x0DF6, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x1310, /* R140 - GPIO Function Select 1 */
+ 0x0003, /* R141 - GPIO Function Select 2 */
+ 0x2000, /* R142 - GPIO Function Select 3 */
+ 0x0000, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 */
+ 0x0000, /* R175 */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x001A, /* R180 - DCDC1 Control */
+ 0x0800, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0056, /* R186 - DCDC3 Control */
+ 0x0400, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0026, /* R189 - DCDC4 Control */
+ 0x0C00, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 */
+ 0x0000, /* R193 */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 */
+ 0x0C00, /* R196 */
+ 0x0006, /* R197 */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0400, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0010, /* R203 - LDO2 Control */
+ 0x0C00, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x0015, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001A, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 - FLL Test 1 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x1000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8351_mode3_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0001, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0010, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0BFB, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFD, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0310, /* R140 - GPIO Function Select 1 */
+ 0x0001, /* R141 - GPIO Function Select 2 */
+ 0x2300, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 */
+ 0x0000, /* R175 */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0026, /* R186 - DCDC3 Control */
+ 0x0800, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0062, /* R189 - DCDC4 Control */
+ 0x1400, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 */
+ 0x0000, /* R193 */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 */
+ 0x0400, /* R196 */
+ 0x0006, /* R197 */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x0006, /* R200 - LDO1 Control */
+ 0x0C00, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0016, /* R203 - LDO2 Control */
+ 0x0000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x0019, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001A, /* R209 - LDO4 Control */
+ 0x1000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 - FLL Test 1 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x1000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode0_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0004, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0FFC, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFC, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0013, /* R140 - GPIO Function Select 1 */
+ 0x0000, /* R141 - GPIO Function Select 2 */
+ 0x0000, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0000, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0000, /* R186 - DCDC3 Control */
+ 0x0000, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0000, /* R189 - DCDC4 Control */
+ 0x0000, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0000, /* R195 - DCDC6 Control */
+ 0x0000, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x001B, /* R203 - LDO2 Control */
+ 0x0000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001B, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001B, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode1_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0BFB, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFF, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0300, /* R140 - GPIO Function Select 1 */
+ 0x0000, /* R141 - GPIO Function Select 2 */
+ 0x2300, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x0062, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0006, /* R186 - DCDC3 Control */
+ 0x0800, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0006, /* R189 - DCDC4 Control */
+ 0x0C00, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 - DCDC6 Control */
+ 0x1000, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x0002, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x001A, /* R203 - LDO2 Control */
+ 0x0000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001F, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001F, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode2_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x0110, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x09DA, /* R134 - GPIO Configuration (i/o) */
+ 0x0DD6, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x1310, /* R140 - GPIO Function Select 1 */
+ 0x0033, /* R141 - GPIO Function Select 2 */
+ 0x2000, /* R142 - GPIO Function Select 3 */
+ 0x0000, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0800, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0056, /* R186 - DCDC3 Control */
+ 0x1800, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x000E, /* R189 - DCDC4 Control */
+ 0x1000, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 - DCDC6 Control */
+ 0x0C00, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0006, /* R203 - LDO2 Control */
+ 0x0400, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001C, /* R206 - LDO3 Control */
+ 0x1400, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001A, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8352_mode3_defaults[] = {
+ 0x6143, /* R0 - Reset/ID */
+ 0x0000, /* R1 - ID */
+ 0x0002, /* R2 - Revision */
+ 0x1C02, /* R3 - System Control 1 */
+ 0x0204, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3A00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - OUT1L Volume */
+ 0x00E4, /* R105 - OUT1R Volume */
+ 0x00E4, /* R106 - OUT2L Volume */
+ 0x02E4, /* R107 - OUT2R Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0010, /* R129 - GPIO Pin pull up Control */
+ 0x0000, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0BFB, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFD, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0310, /* R140 - GPIO Function Select 1 */
+ 0x0001, /* R141 - GPIO Function Select 2 */
+ 0x2300, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x032D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x0006, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0050, /* R186 - DCDC3 Control */
+ 0x0C00, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x000E, /* R189 - DCDC4 Control */
+ 0x0400, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0029, /* R195 - DCDC6 Control */
+ 0x0800, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001D, /* R200 - LDO1 Control */
+ 0x1000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0017, /* R203 - LDO2 Control */
+ 0x1000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x0006, /* R206 - LDO3 Control */
+ 0x1000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x0010, /* R209 - LDO4 Control */
+ 0x1000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 - Security1 */
+ 0x4000, /* R220 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 - Signal overrides */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 - Charger Overides/status */
+ 0x0000, /* R227 - misc overrides */
+ 0x0000, /* R228 - Supply overrides/status 1 */
+ 0x0000, /* R229 - Supply overrides/status 2 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 - comparotor overrides */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 - State Machine status */
+ 0x1200, /* R234 */
+ 0x0000, /* R235 */
+ 0x8000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0003, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0004, /* R243 */
+ 0x0300, /* R244 */
+ 0x0000, /* R245 */
+ 0x0200, /* R246 */
+ 0x0000, /* R247 */
+ 0x1000, /* R248 - DCDC1 Test Controls */
+ 0x5000, /* R249 */
+ 0x1000, /* R250 - DCDC3 Test Controls */
+ 0x1000, /* R251 - DCDC4 Test Controls */
+ 0x5100, /* R252 */
+ 0x1000, /* R253 - DCDC6 Test Controls */
+};
+#endif
+
/* The register defaults for the config mode used must be compiled in but
* due to the impact on kernel size it is possible to disable
*/
@@ -1307,14 +3403,14 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
{ 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */
{ 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */
{ 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */
- { 0xFFFF, 0xFFFF, 0xFFFF }, /* R219 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R219 - Security */
{ 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */
{ 0x0000, 0x0000, 0x0000 }, /* R221 */
{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */
{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */
{ 0x0000, 0x0000, 0x0000 }, /* R224 */
{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
- { 0x0000, 0x0000, 0x0000 }, /* R226 */
+ { 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
{ 0x0000, 0x0000, 0xFFFF }, /* R227 */
{ 0x0000, 0x0000, 0x0000 }, /* R228 */
{ 0x0000, 0x0000, 0x0000 }, /* R229 */
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 6a0cedb5bb8a..cf30d06a0104 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -15,6 +15,7 @@
#include <linux/bug.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/wm8400-private.h>
#include <linux/mfd/wm8400-audio.h>
@@ -239,6 +240,16 @@ void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400)
}
EXPORT_SYMBOL_GPL(wm8400_reset_codec_reg_cache);
+static int wm8400_register_codec(struct wm8400 *wm8400)
+{
+ struct mfd_cell cell = {
+ .name = "wm8400-codec",
+ .driver_data = wm8400,
+ };
+
+ return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0);
+}
+
/*
* wm8400_init - Generic initialisation
*
@@ -296,24 +307,32 @@ static int wm8400_init(struct wm8400 *wm8400,
reg = (reg & WM8400_CHIP_REV_MASK) >> WM8400_CHIP_REV_SHIFT;
dev_info(wm8400->dev, "WM8400 revision %x\n", reg);
+ ret = wm8400_register_codec(wm8400);
+ if (ret != 0) {
+ dev_err(wm8400->dev, "Failed to register codec\n");
+ goto err_children;
+ }
+
if (pdata && pdata->platform_init) {
ret = pdata->platform_init(wm8400->dev);
- if (ret != 0)
+ if (ret != 0) {
dev_err(wm8400->dev, "Platform init failed: %d\n",
ret);
+ goto err_children;
+ }
} else
dev_warn(wm8400->dev, "No platform initialisation supplied\n");
+ return 0;
+
+err_children:
+ mfd_remove_devices(wm8400->dev);
return ret;
}
static void wm8400_release(struct wm8400 *wm8400)
{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(wm8400->regulators); i++)
- if (wm8400->regulators[i].name)
- platform_device_unregister(&wm8400->regulators[i]);
+ mfd_remove_devices(wm8400->dev);
}
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)