summaryrefslogtreecommitdiff
path: root/drivers/media/video/cx23885/cx23885-417.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-417.c')
-rw-r--r--drivers/media/video/cx23885/cx23885-417.c57
1 files changed, 35 insertions, 22 deletions
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 1a1048b18f70..6c3b51ce3372 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -630,6 +630,39 @@ int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value)
return retval;
}
+void mc417_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+ u32 val;
+
+ /* Set the gpio value */
+ mc417_register_read(dev, 0x900C, &val);
+ val |= (mask & 0x000ffff);
+ mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+ u32 val;
+
+ /* Clear the gpio value */
+ mc417_register_read(dev, 0x900C, &val);
+ val &= ~(mask & 0x0000ffff);
+ mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+ u32 val;
+
+ /* Enable GPIO direction bits */
+ mc417_register_read(dev, 0x9020, &val);
+ if (asoutput)
+ val |= (mask & 0x0000ffff);
+ else
+ val &= ~(mask & 0x0000ffff);
+
+ mc417_register_write(dev, 0x9020, val);
+}
/* ------------------------------------------------------------------ */
/* MPEG encoder API */
@@ -955,25 +988,8 @@ static int cx23885_load_firmware(struct cx23885_dev *dev)
retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
IVTV_CMD_HW_BLOCKS_RST);
- /* Restore GPIO settings, make sure EIO14 is enabled as an output. */
- dprintk(2, "%s: GPIO output EIO 0-15 was = 0x%x\n",
- __func__, gpio_output);
- /* Power-up seems to have GPIOs AFU. This was causing digital side
- * to fail at power-up. Seems GPIOs should be set to 0x10ff0411 at
- * power-up.
- * gpio_output |= (1<<14);
- */
- /* Note: GPIO14 is specific to the HVR1800 here */
- gpio_output = 0x10ff0411 | (1<<14);
- retval |= mc417_register_write(dev, 0x9020, gpio_output | (1<<14));
- dprintk(2, "%s: GPIO output EIO 0-15 now = 0x%x\n",
- __func__, gpio_output);
-
- dprintk(1, "%s: GPIO value EIO 0-15 was = 0x%x\n",
- __func__, value);
- value |= (1<<14);
- dprintk(1, "%s: GPIO value EIO 0-15 now = 0x%x\n",
- __func__, value);
+ /* F/W power up disturbs the GPIOs, restore state */
+ retval |= mc417_register_write(dev, 0x9020, gpio_output);
retval |= mc417_register_write(dev, 0x900C, value);
retval |= mc417_register_read(dev, IVTV_REG_VPU, &value);
@@ -1788,9 +1804,6 @@ int cx23885_417_register(struct cx23885_dev *dev)
return err;
}
- /* Initialize MC417 registers */
- cx23885_mc417_init(dev);
-
printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
dev->name, dev->v4l_device->num);