summaryrefslogtreecommitdiff
path: root/drivers/isdn/capi/capiutil.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/capi/capiutil.c')
-rw-r--r--drivers/isdn/capi/capiutil.c200
1 files changed, 0 insertions, 200 deletions
diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c
index d26f17033b68..6e797e502cfa 100644
--- a/drivers/isdn/capi/capiutil.c
+++ b/drivers/isdn/capi/capiutil.c
@@ -22,205 +22,6 @@
/* from CAPI2.0 DDK AVM Berlin GmbH */
-#ifndef CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
-char *capi_info2str(u16 reason)
-{
- return "..";
-}
-#else
-char *capi_info2str(u16 reason)
-{
- switch (reason) {
-
-/*-- informative values (corresponding message was processed) -----*/
- case 0x0001:
- return "NCPI not supported by current protocol, NCPI ignored";
- case 0x0002:
- return "Flags not supported by current protocol, flags ignored";
- case 0x0003:
- return "Alert already sent by another application";
-
-/*-- error information concerning CAPI_REGISTER -----*/
- case 0x1001:
- return "Too many applications";
- case 0x1002:
- return "Logical block size too small, must be at least 128 Bytes";
- case 0x1003:
- return "Buffer exceeds 64 kByte";
- case 0x1004:
- return "Message buffer size too small, must be at least 1024 Bytes";
- case 0x1005:
- return "Max. number of logical connections not supported";
- case 0x1006:
- return "Reserved";
- case 0x1007:
- return "The message could not be accepted because of an internal busy condition";
- case 0x1008:
- return "OS resource error (no memory ?)";
- case 0x1009:
- return "CAPI not installed";
- case 0x100A:
- return "Controller does not support external equipment";
- case 0x100B:
- return "Controller does only support external equipment";
-
-/*-- error information concerning message exchange functions -----*/
- case 0x1101:
- return "Illegal application number";
- case 0x1102:
- return "Illegal command or subcommand or message length less than 12 bytes";
- case 0x1103:
- return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI";
- case 0x1104:
- return "Queue is empty";
- case 0x1105:
- return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE";
- case 0x1106:
- return "Unknown notification parameter";
- case 0x1107:
- return "The Message could not be accepted because of an internal busy condition";
- case 0x1108:
- return "OS Resource error (no memory ?)";
- case 0x1109:
- return "CAPI not installed";
- case 0x110A:
- return "Controller does not support external equipment";
- case 0x110B:
- return "Controller does only support external equipment";
-
-/*-- error information concerning resource / coding problems -----*/
- case 0x2001:
- return "Message not supported in current state";
- case 0x2002:
- return "Illegal Controller / PLCI / NCCI";
- case 0x2003:
- return "Out of PLCI";
- case 0x2004:
- return "Out of NCCI";
- case 0x2005:
- return "Out of LISTEN";
- case 0x2006:
- return "Out of FAX resources (protocol T.30)";
- case 0x2007:
- return "Illegal message parameter coding";
-
-/*-- error information concerning requested services -----*/
- case 0x3001:
- return "B1 protocol not supported";
- case 0x3002:
- return "B2 protocol not supported";
- case 0x3003:
- return "B3 protocol not supported";
- case 0x3004:
- return "B1 protocol parameter not supported";
- case 0x3005:
- return "B2 protocol parameter not supported";
- case 0x3006:
- return "B3 protocol parameter not supported";
- case 0x3007:
- return "B protocol combination not supported";
- case 0x3008:
- return "NCPI not supported";
- case 0x3009:
- return "CIP Value unknown";
- case 0x300A:
- return "Flags not supported (reserved bits)";
- case 0x300B:
- return "Facility not supported";
- case 0x300C:
- return "Data length not supported by current protocol";
- case 0x300D:
- return "Reset procedure not supported by current protocol";
-
-/*-- informations about the clearing of a physical connection -----*/
- case 0x3301:
- return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)";
- case 0x3302:
- return "Protocol error layer 2";
- case 0x3303:
- return "Protocol error layer 3";
- case 0x3304:
- return "Another application got that call";
-/*-- T.30 specific reasons -----*/
- case 0x3311:
- return "Connecting not successful (remote station is no FAX G3 machine)";
- case 0x3312:
- return "Connecting not successful (training error)";
- case 0x3313:
- return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)";
- case 0x3314:
- return "Disconnected during transfer (remote abort)";
- case 0x3315:
- return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)";
- case 0x3316:
- return "Disconnected during transfer (local tx data underrun)";
- case 0x3317:
- return "Disconnected during transfer (local rx data overflow)";
- case 0x3318:
- return "Disconnected during transfer (local abort)";
- case 0x3319:
- return "Illegal parameter coding (e.g. SFF coding error)";
-
-/*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/
- case 0x3481: return "Unallocated (unassigned) number";
- case 0x3482: return "No route to specified transit network";
- case 0x3483: return "No route to destination";
- case 0x3486: return "Channel unacceptable";
- case 0x3487:
- return "Call awarded and being delivered in an established channel";
- case 0x3490: return "Normal call clearing";
- case 0x3491: return "User busy";
- case 0x3492: return "No user responding";
- case 0x3493: return "No answer from user (user alerted)";
- case 0x3495: return "Call rejected";
- case 0x3496: return "Number changed";
- case 0x349A: return "Non-selected user clearing";
- case 0x349B: return "Destination out of order";
- case 0x349C: return "Invalid number format";
- case 0x349D: return "Facility rejected";
- case 0x349E: return "Response to STATUS ENQUIRY";
- case 0x349F: return "Normal, unspecified";
- case 0x34A2: return "No circuit / channel available";
- case 0x34A6: return "Network out of order";
- case 0x34A9: return "Temporary failure";
- case 0x34AA: return "Switching equipment congestion";
- case 0x34AB: return "Access information discarded";
- case 0x34AC: return "Requested circuit / channel not available";
- case 0x34AF: return "Resources unavailable, unspecified";
- case 0x34B1: return "Quality of service unavailable";
- case 0x34B2: return "Requested facility not subscribed";
- case 0x34B9: return "Bearer capability not authorized";
- case 0x34BA: return "Bearer capability not presently available";
- case 0x34BF: return "Service or option not available, unspecified";
- case 0x34C1: return "Bearer capability not implemented";
- case 0x34C2: return "Channel type not implemented";
- case 0x34C5: return "Requested facility not implemented";
- case 0x34C6: return "Only restricted digital information bearer capability is available";
- case 0x34CF: return "Service or option not implemented, unspecified";
- case 0x34D1: return "Invalid call reference value";
- case 0x34D2: return "Identified channel does not exist";
- case 0x34D3: return "A suspended call exists, but this call identity does not";
- case 0x34D4: return "Call identity in use";
- case 0x34D5: return "No call suspended";
- case 0x34D6: return "Call having the requested call identity has been cleared";
- case 0x34D8: return "Incompatible destination";
- case 0x34DB: return "Invalid transit network selection";
- case 0x34DF: return "Invalid message, unspecified";
- case 0x34E0: return "Mandatory information element is missing";
- case 0x34E1: return "Message type non-existent or not implemented";
- case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented";
- case 0x34E3: return "Information element non-existent or not implemented";
- case 0x34E4: return "Invalid information element contents";
- case 0x34E5: return "Message not compatible with call state";
- case 0x34E6: return "Recovery on timer expiry";
- case 0x34EF: return "Protocol error, unspecified";
- case 0x34FF: return "Interworking, unspecified";
-
- default: return "No additional information";
- }
-}
-#endif
-
typedef struct {
int typ;
size_t off;
@@ -1073,4 +874,3 @@ EXPORT_SYMBOL(capi_cmsg_header);
EXPORT_SYMBOL(capi_cmd2str);
EXPORT_SYMBOL(capi_cmsg2str);
EXPORT_SYMBOL(capi_message2str);
-EXPORT_SYMBOL(capi_info2str);