summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1/pcie.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/hfi1/pcie.c')
-rw-r--r--drivers/infiniband/hw/hfi1/pcie.c68
1 files changed, 64 insertions, 4 deletions
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 0bac21e6a658..89c68da1c273 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -679,6 +679,10 @@ static uint pcie_pset = UNSET_PSET;
module_param(pcie_pset, uint, S_IRUGO);
MODULE_PARM_DESC(pcie_pset, "PCIe Eq Pset value to use, range is 0-10");
+static uint pcie_ctle = 1; /* discrete on, integrated off */
+module_param(pcie_ctle, uint, S_IRUGO);
+MODULE_PARM_DESC(pcie_ctle, "PCIe static CTLE mode, bit 0 - discrete on/off, bit 1 - integrated on/off");
+
/* equalization columns */
#define PREC 0
#define ATTN 1
@@ -716,6 +720,36 @@ static const u8 integrated_preliminary_eq[11][3] = {
{ 0x00, 0x1e, 0x0a }, /* p10 */
};
+static const u8 discrete_ctle_tunings[11][4] = {
+ /* DC LF HF BW */
+ { 0x48, 0x0b, 0x04, 0x04 }, /* p0 */
+ { 0x60, 0x05, 0x0f, 0x0a }, /* p1 */
+ { 0x50, 0x09, 0x06, 0x06 }, /* p2 */
+ { 0x68, 0x05, 0x0f, 0x0a }, /* p3 */
+ { 0x80, 0x05, 0x0f, 0x0a }, /* p4 */
+ { 0x70, 0x05, 0x0f, 0x0a }, /* p5 */
+ { 0x68, 0x05, 0x0f, 0x0a }, /* p6 */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p7 */
+ { 0x48, 0x09, 0x06, 0x06 }, /* p8 */
+ { 0x60, 0x05, 0x0f, 0x0a }, /* p9 */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p10 */
+};
+
+static const u8 integrated_ctle_tunings[11][4] = {
+ /* DC LF HF BW */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p0 */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p1 */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p2 */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p3 */
+ { 0x58, 0x0a, 0x05, 0x05 }, /* p4 */
+ { 0x48, 0x0a, 0x05, 0x05 }, /* p5 */
+ { 0x40, 0x0a, 0x05, 0x05 }, /* p6 */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p7 */
+ { 0x38, 0x0f, 0x00, 0x00 }, /* p8 */
+ { 0x38, 0x09, 0x06, 0x06 }, /* p9 */
+ { 0x38, 0x0e, 0x01, 0x01 }, /* p10 */
+};
+
/* helper to format the value to write to hardware */
#define eq_value(pre, curr, post) \
((((u32)(pre)) << \
@@ -951,11 +985,14 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
u32 status, err;
int ret;
int do_retry, retry_count = 0;
+ int intnum = 0;
uint default_pset;
u16 target_vector, target_speed;
u16 lnkctl2, vendor;
u8 div;
const u8 (*eq)[3];
+ const u8 (*ctle_tunings)[4];
+ uint static_ctle_mode;
int return_error = 0;
/* PCIe Gen3 is for the ASIC only */
@@ -1089,6 +1126,9 @@ retry:
div = 3;
eq = discrete_preliminary_eq;
default_pset = DEFAULT_DISCRETE_PSET;
+ ctle_tunings = discrete_ctle_tunings;
+ /* bit 0 - discrete on/off */
+ static_ctle_mode = pcie_ctle & 0x1;
} else {
/* 400mV, FS=29, LF = 9 */
fs = 29;
@@ -1096,6 +1136,9 @@ retry:
div = 1;
eq = integrated_preliminary_eq;
default_pset = DEFAULT_MCP_PSET;
+ ctle_tunings = integrated_ctle_tunings;
+ /* bit 1 - integrated on/off */
+ static_ctle_mode = (pcie_ctle >> 1) & 0x1;
}
pci_write_config_dword(dd->pcidev, PCIE_CFG_REG_PL101,
(fs <<
@@ -1135,16 +1178,33 @@ retry:
* step 5c: Program gasket interrupts
*/
/* set the Rx Bit Rate to REFCLK ratio */
- write_gasket_interrupt(dd, 0, 0x0006, 0x0050);
+ write_gasket_interrupt(dd, intnum++, 0x0006, 0x0050);
/* disable pCal for PCIe Gen3 RX equalization */
- write_gasket_interrupt(dd, 1, 0x0026, 0x5b01);
+ /* select adaptive or static CTLE */
+ write_gasket_interrupt(dd, intnum++, 0x0026,
+ 0x5b01 | (static_ctle_mode << 3));
/*
* Enable iCal for PCIe Gen3 RX equalization, and set which
* evaluation of RX_EQ_EVAL will launch the iCal procedure.
*/
- write_gasket_interrupt(dd, 2, 0x0026, 0x5202);
+ write_gasket_interrupt(dd, intnum++, 0x0026, 0x5202);
+
+ if (static_ctle_mode) {
+ /* apply static CTLE tunings */
+ u8 pcie_dc, pcie_lf, pcie_hf, pcie_bw;
+
+ pcie_dc = ctle_tunings[pcie_pset][0];
+ pcie_lf = ctle_tunings[pcie_pset][1];
+ pcie_hf = ctle_tunings[pcie_pset][2];
+ pcie_bw = ctle_tunings[pcie_pset][3];
+ write_gasket_interrupt(dd, intnum++, 0x0026, 0x0200 | pcie_dc);
+ write_gasket_interrupt(dd, intnum++, 0x0026, 0x0100 | pcie_lf);
+ write_gasket_interrupt(dd, intnum++, 0x0026, 0x0000 | pcie_hf);
+ write_gasket_interrupt(dd, intnum++, 0x0026, 0x5500 | pcie_bw);
+ }
+
/* terminate list */
- write_gasket_interrupt(dd, 3, 0x0000, 0x0000);
+ write_gasket_interrupt(dd, intnum++, 0x0000, 0x0000);
/*
* step 5d: program XMT margin