summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig28
-rw-r--r--drivers/hwmon/Makefile2
-rw-r--r--drivers/hwmon/abituguru.c36
-rw-r--r--drivers/hwmon/abituguru3.c45
-rw-r--r--drivers/hwmon/adm9240.c32
-rw-r--r--drivers/hwmon/ads7828.c4
-rw-r--r--drivers/hwmon/adt7470.c4
-rw-r--r--drivers/hwmon/applesmc.c1632
-rw-r--r--drivers/hwmon/asb100.c9
-rw-r--r--drivers/hwmon/asus_atk0110.c7
-rw-r--r--drivers/hwmon/coretemp.c11
-rw-r--r--drivers/hwmon/dme1737.c201
-rw-r--r--drivers/hwmon/ds620.c337
-rw-r--r--drivers/hwmon/emc1403.c16
-rw-r--r--drivers/hwmon/f71805f.c29
-rw-r--r--drivers/hwmon/f71882fg.c23
-rw-r--r--drivers/hwmon/fschmd.c5
-rw-r--r--drivers/hwmon/hp_accel.c13
-rw-r--r--drivers/hwmon/hwmon-vid.c11
-rw-r--r--drivers/hwmon/hwmon.c4
-rw-r--r--drivers/hwmon/ibmaem.c4
-rw-r--r--drivers/hwmon/it87.c30
-rw-r--r--drivers/hwmon/lis3lv02d.c23
-rw-r--r--drivers/hwmon/lm70.c5
-rw-r--r--drivers/hwmon/lm78.c14
-rw-r--r--drivers/hwmon/lm93.c21
-rw-r--r--drivers/hwmon/lm95241.c495
-rw-r--r--drivers/hwmon/pc87360.c53
-rw-r--r--drivers/hwmon/pc87427.c26
-rw-r--r--drivers/hwmon/pcf8591.c5
-rw-r--r--drivers/hwmon/pkgtemp.c7
-rw-r--r--drivers/hwmon/sht21.c307
-rw-r--r--drivers/hwmon/sis5595.c10
-rw-r--r--drivers/hwmon/smsc47b397.c13
-rw-r--r--drivers/hwmon/smsc47m1.c31
-rw-r--r--drivers/hwmon/via-cputemp.c35
-rw-r--r--drivers/hwmon/via686a.c24
-rw-r--r--drivers/hwmon/vt1211.c30
-rw-r--r--drivers/hwmon/vt8231.c10
-rw-r--r--drivers/hwmon/w83627ehf.c23
-rw-r--r--drivers/hwmon/w83627hf.c17
-rw-r--r--drivers/hwmon/w83781d.c29
-rw-r--r--drivers/hwmon/w83792d.c44
-rw-r--r--drivers/hwmon/w83793.c38
-rw-r--r--drivers/hwmon/w83795.c4
45 files changed, 2030 insertions, 1717 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a56f6adf3b76..773e484f1646 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -274,6 +274,16 @@ config SENSORS_ATXP1
This driver can also be built as a module. If so, the module
will be called atxp1.
+config SENSORS_DS620
+ tristate "Dallas Semiconductor DS620"
+ depends on I2C
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS620 sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds620.
+
config SENSORS_DS1621
tristate "Dallas Semiconductor DS1621 and DS1625"
depends on I2C
@@ -608,8 +618,8 @@ config SENSORS_LM93
depends on I2C
select HWMON_VID
help
- If you say yes here you get support for National Semiconductor LM93
- sensor chips.
+ If you say yes here you get support for National Semiconductor LM93,
+ LM94, and compatible sensor chips.
This driver can also be built as a module. If so, the module
will be called lm93.
@@ -734,6 +744,16 @@ config SENSORS_SHT15
This driver can also be built as a module. If so, the module
will be called sht15.
+config SENSORS_SHT21
+ tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
+ depends on I2C
+ help
+ If you say yes here you get support for the Sensiron SHT21, SHT25
+ humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht21.
+
config SENSORS_S3C
tristate "Samsung built-in ADC"
depends on S3C_ADC
@@ -789,10 +809,10 @@ config SENSORS_DME1737
will be called dme1737.
config SENSORS_EMC1403
- tristate "SMSC EMC1403 thermal sensor"
+ tristate "SMSC EMC1403/23 thermal sensor"
depends on I2C
help
- If you say yes here you get support for the SMSC EMC1403
+ If you say yes here you get support for the SMSC EMC1403/23
temperature monitoring chip.
Threshold values can be configured using sysfs.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 2479b3da272c..dde02d99c238 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_PKGTEMP) += pkgtemp.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
+obj-$(CONFIG_SENSORS_DS620) += ds620.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
@@ -90,6 +91,7 @@ obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
+obj-$(CONFIG_SENSORS_SHT21) += sht21.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMM665) += smm665.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 03694cc17a32..8f07a9dda152 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -20,6 +20,9 @@
the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because
of lack of specs the CPU/RAM voltage & frequency control is not supported!
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
@@ -220,6 +223,10 @@ struct abituguru_data {
u8 pwm_settings[ABIT_UGURU_MAX_PWMS][5];
};
+static const char *never_happen = "This should never happen.";
+static const char *report_this =
+ "Please report this to the abituguru maintainer (see MAINTAINERS)";
+
/* wait till the uguru is in the specified state */
static int abituguru_wait(struct abituguru_data *data, u8 state)
{
@@ -438,8 +445,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
/* Test val is sane / usable for sensor type detection. */
if ((val < 10u) || (val > 250u)) {
- printk(KERN_WARNING ABIT_UGURU_NAME
- ": bank1-sensor: %d reading (%d) too close to limits, "
+ pr_warn("bank1-sensor: %d reading (%d) too close to limits, "
"unable to determine sensor type, skipping sensor\n",
(int)sensor_addr, (int)val);
/* assume no sensor is there for sensors for which we can't
@@ -535,10 +541,8 @@ abituguru_detect_bank1_sensor_type_exit:
3) == 3)
break;
if (i == 3) {
- printk(KERN_ERR ABIT_UGURU_NAME
- ": Fatal error could not restore original settings. "
- "This should never happen please report this to the "
- "abituguru maintainer (see MAINTAINERS)\n");
+ pr_err("Fatal error could not restore original settings. %s %s\n",
+ never_happen, report_this);
return -ENODEV;
}
return ret;
@@ -1268,14 +1272,12 @@ static int __devinit abituguru_probe(struct platform_device *pdev)
}
/* Fail safe check, this should never happen! */
if (sysfs_names_free < 0) {
- printk(KERN_ERR ABIT_UGURU_NAME ": Fatal error ran out of "
- "space for sysfs attr names. This should never "
- "happen please report to the abituguru maintainer "
- "(see MAINTAINERS)\n");
+ pr_err("Fatal error ran out of space for sysfs attr names. %s %s",
+ never_happen, report_this);
res = -ENAMETOOLONG;
goto abituguru_probe_error;
}
- printk(KERN_INFO ABIT_UGURU_NAME ": found Abit uGuru\n");
+ pr_info("found Abit uGuru\n");
/* Register sysfs hooks */
for (i = 0; i < sysfs_attr_i; i++)
@@ -1432,8 +1434,7 @@ static int __init abituguru_detect(void)
"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
if (force) {
- printk(KERN_INFO ABIT_UGURU_NAME ": Assuming Abit uGuru is "
- "present because of \"force\" parameter\n");
+ pr_info("Assuming Abit uGuru is present because of \"force\" parameter\n");
return ABIT_UGURU_BASE;
}
@@ -1467,8 +1468,7 @@ static int __init abituguru_init(void)
abituguru_pdev = platform_device_alloc(ABIT_UGURU_NAME, address);
if (!abituguru_pdev) {
- printk(KERN_ERR ABIT_UGURU_NAME
- ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
err = -ENOMEM;
goto exit_driver_unregister;
}
@@ -1479,15 +1479,13 @@ static int __init abituguru_init(void)
err = platform_device_add_resources(abituguru_pdev, &res, 1);
if (err) {
- printk(KERN_ERR ABIT_UGURU_NAME
- ": Device resource addition failed (%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(abituguru_pdev);
if (err) {
- printk(KERN_ERR ABIT_UGURU_NAME
- ": Device addition failed (%d)\n", err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 3cf28af614b5..48d21e22e930 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -23,6 +23,9 @@
chip found on newer Abit uGuru motherboards. Note: because of lack of specs
only reading the sensors and their settings is supported.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -608,6 +611,9 @@ static int verbose = 1;
module_param(verbose, bool, 0644);
MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
+static const char *never_happen = "This should never happen.";
+static const char *report_this =
+ "Please report this to the abituguru3 maintainer (see MAINTAINERS)";
/* wait while the uguru is busy (usually after a write) */
static int abituguru3_wait_while_busy(struct abituguru3_data *data)
@@ -940,15 +946,13 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
if (abituguru3_motherboards[i].id == id)
break;
if (!abituguru3_motherboards[i].id) {
- printk(KERN_ERR ABIT_UGURU3_NAME ": error unknown motherboard "
- "ID: %04X. Please report this to the abituguru3 "
- "maintainer (see MAINTAINERS)\n", (unsigned int)id);
+ pr_err("error unknown motherboard ID: %04X. %s\n",
+ (unsigned int)id, report_this);
goto abituguru3_probe_error;
}
data->sensors = abituguru3_motherboards[i].sensors;
- printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
- "ID: %04X\n", (unsigned int)id);
+ pr_info("found Abit uGuru3, motherboard ID: %04X\n", (unsigned int)id);
/* Fill the sysfs attr array */
sysfs_attr_i = 0;
@@ -957,11 +961,8 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
for (i = 0; data->sensors[i].name; i++) {
/* Fail safe check, this should never happen! */
if (i >= ABIT_UGURU3_MAX_NO_SENSORS) {
- printk(KERN_ERR ABIT_UGURU3_NAME
- ": Fatal error motherboard has more sensors "
- "then ABIT_UGURU3_MAX_NO_SENSORS. This should "
- "never happen please report to the abituguru3 "
- "maintainer (see MAINTAINERS)\n");
+ pr_err("Fatal error motherboard has more sensors then ABIT_UGURU3_MAX_NO_SENSORS. %s %s\n",
+ never_happen, report_this);
res = -ENAMETOOLONG;
goto abituguru3_probe_error;
}
@@ -983,10 +984,8 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
}
/* Fail safe check, this should never happen! */
if (sysfs_names_free < 0) {
- printk(KERN_ERR ABIT_UGURU3_NAME
- ": Fatal error ran out of space for sysfs attr names. "
- "This should never happen please report to the "
- "abituguru3 maintainer (see MAINTAINERS)\n");
+ pr_err("Fatal error ran out of space for sysfs attr names. %s %s\n",
+ never_happen, report_this);
res = -ENAMETOOLONG;
goto abituguru3_probe_error;
}
@@ -1189,8 +1188,7 @@ static int __init abituguru3_detect(void)
"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
if (force) {
- printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
- "present because of \"force\" parameter\n");
+ pr_info("Assuming Abit uGuru3 is present because of \"force\" parameter\n");
return 0;
}
@@ -1219,10 +1217,8 @@ static int __init abituguru3_init(void)
return err;
#ifdef CONFIG_DMI
- printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
- "not detected using DMI. Please send the output of "
- "\"dmidecode\" to the abituguru3 maintainer "
- "(see MAINTAINERS)\n");
+ pr_warn("this motherboard was not detected using DMI. "
+ "Please send the output of \"dmidecode\" to the abituguru3 maintainer (see MAINTAINERS)\n");
#endif
}
@@ -1233,8 +1229,7 @@ static int __init abituguru3_init(void)
abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
ABIT_UGURU3_BASE);
if (!abituguru3_pdev) {
- printk(KERN_ERR ABIT_UGURU3_NAME
- ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
err = -ENOMEM;
goto exit_driver_unregister;
}
@@ -1245,15 +1240,13 @@ static int __init abituguru3_init(void)
err = platform_device_add_resources(abituguru3_pdev, &res, 1);
if (err) {
- printk(KERN_ERR ABIT_UGURU3_NAME
- ": Device resource addition failed (%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(abituguru3_pdev);
if (err) {
- printk(KERN_ERR ABIT_UGURU3_NAME
- ": Device addition failed (%d)\n", err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 0727ad250793..9e234b981b83 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -20,7 +20,7 @@
* Alarms 16-bit map of active alarms
* Analog Out 0..1250 mV output
*
- * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear'
+ * Chassis Intrusion: clear CI latch with 'echo 0 > intrusion0_alarm'
*
* Test hardware: Intel SE440BX-2 desktop motherboard --Grant
*
@@ -476,13 +476,16 @@ static ssize_t set_aout(struct device *dev,
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
/* chassis_clear */
-static ssize_t chassis_clear(struct device *dev,
+static ssize_t chassis_clear_legacy(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned long val = simple_strtol(buf, NULL, 10);
+ dev_warn(dev, "Attribute chassis_clear is deprecated, "
+ "use intrusion0_alarm instead\n");
+
if (val == 1) {
i2c_smbus_write_byte_data(client,
ADM9240_REG_CHASSIS_CLEAR, 0x80);
@@ -490,7 +493,29 @@ static ssize_t chassis_clear(struct device *dev,
}
return count;
}
-static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear);
+static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear_legacy);
+
+static ssize_t chassis_clear(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm9240_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
+ data->valid = 0; /* Force cache refresh */
+ mutex_unlock(&data->update_lock);
+ dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
+
+ return count;
+}
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, show_alarm,
+ chassis_clear, 12);
static struct attribute *adm9240_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
@@ -532,6 +557,7 @@ static struct attribute *adm9240_attributes[] = {
&dev_attr_alarms.attr,
&dev_attr_aout_output.attr,
&dev_attr_chassis_clear.attr,
+ &sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
&dev_attr_cpu0_vid.attr,
NULL
};
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index aac85f3aed50..c42c5a69a664 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -4,7 +4,7 @@
This driver is based on the lm75 and other lm_sensors/hwmon drivers
- Written by Steve Hardy <steve@linuxrealtime.co.uk>
+ Written by Steve Hardy <shardy@redhat.com>
Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
@@ -271,7 +271,7 @@ static void __exit sensors_ads7828_exit(void)
i2c_del_driver(&ads7828_driver);
}
-MODULE_AUTHOR("Steve Hardy <steve@linuxrealtime.co.uk>");
+MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>");
MODULE_DESCRIPTION("ADS7828 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 87d92a56a939..c6d1ce059aea 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -19,6 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
@@ -274,7 +276,7 @@ static int adt7470_read_temperatures(struct i2c_client *client,
i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]);
if (res) {
- printk(KERN_ERR "ha ha, interrupted");
+ pr_err("ha ha, interrupted\n");
return -EAGAIN;
}
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index b6598aa557a0..ce0372f0615e 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -4,6 +4,7 @@
* computers.
*
* Copyright (C) 2007 Nicolas Boichat <nicolas@boichat.ch>
+ * Copyright (C) 2010 Henrik Rydberg <rydberg@euromail.se>
*
* Based on hdaps.c driver:
* Copyright (C) 2005 Robert Love <rml@novell.com>
@@ -26,10 +27,13 @@
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/timer.h>
#include <linux/dmi.h>
@@ -49,6 +53,7 @@
#define APPLESMC_MAX_DATA_LENGTH 32
+/* wait up to 32 ms for a status change. */
#define APPLESMC_MIN_WAIT 0x0040
#define APPLESMC_MAX_WAIT 0x8000
@@ -73,104 +78,15 @@
#define FANS_COUNT "FNum" /* r-o ui8 */
#define FANS_MANUAL "FS! " /* r-w ui16 */
-#define FAN_ACTUAL_SPEED "F0Ac" /* r-o fpe2 (2 bytes) */
-#define FAN_MIN_SPEED "F0Mn" /* r-o fpe2 (2 bytes) */
-#define FAN_MAX_SPEED "F0Mx" /* r-o fpe2 (2 bytes) */
-#define FAN_SAFE_SPEED "F0Sf" /* r-o fpe2 (2 bytes) */
-#define FAN_TARGET_SPEED "F0Tg" /* r-w fpe2 (2 bytes) */
-#define FAN_POSITION "F0ID" /* r-o char[16] */
-
-/*
- * Temperature sensors keys (sp78 - 2 bytes).
- */
-static const char *temperature_sensors_sets[][41] = {
-/* Set 0: Macbook Pro */
- { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
- "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
-/* Set 1: Macbook2 set */
- { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "TTF0", "Th0H",
- "Th0S", "Th1H", NULL },
-/* Set 2: Macbook set */
- { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "Th0H", "Th0S",
- "Th1H", "Ts0P", NULL },
-/* Set 3: Macmini set */
- { "TC0D", "TC0P", NULL },
-/* Set 4: Mac Pro (2 x Quad-Core) */
- { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
- "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "THTG", "TH0P",
- "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
- "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
- "TM9S", "TN0H", "TS0C", NULL },
-/* Set 5: iMac */
- { "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
- "Tp0C", NULL },
-/* Set 6: Macbook3 set */
- { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
- "Th0S", "Th1H", NULL },
-/* Set 7: Macbook Air */
- { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TC0P", "TCFP",
- "TTF0", "TW0P", "Th0H", "Tp0P", "TpFP", "Ts0P", "Ts0S", NULL },
-/* Set 8: Macbook Pro 4,1 (Penryn) */
- { "TB0T", "TC0D", "TC0P", "TG0D", "TG0H", "TTF0", "TW0P", "Th0H",
- "Th1H", "Th2H", "Tm0P", "Ts0P", NULL },
-/* Set 9: Macbook Pro 3,1 (Santa Rosa) */
- { "TALP", "TB0T", "TC0D", "TC0P", "TG0D", "TG0H", "TTF0", "TW0P",
- "Th0H", "Th1H", "Th2H", "Tm0P", "Ts0P", NULL },
-/* Set 10: iMac 5,1 */
- { "TA0P", "TC0D", "TC0P", "TG0D", "TH0P", "TO0P", "Tm0P", NULL },
-/* Set 11: Macbook 5,1 */
- { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0P", "TN0D", "TN0P",
- "TTF0", "Th0H", "Th1H", "ThFH", "Ts0P", "Ts0S", NULL },
-/* Set 12: Macbook Pro 5,1 */
- { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D",
- "TG0F", "TG0H", "TG0P", "TG0T", "TG1H", "TN0D", "TN0P", "TTF0",
- "Th2H", "Tm0P", "Ts0P", "Ts0S", NULL },
-/* Set 13: iMac 8,1 */
- { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
- "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL },
-/* Set 14: iMac 6,1 */
- { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
- "TO0P", "Tp0P", NULL },
-/* Set 15: MacBook Air 2,1 */
- { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0",
- "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P",
- "Ts0S", NULL },
-/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */
- { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
- "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P",
- "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P",
- "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
- "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
- NULL },
-/* Set 17: iMac 9,1 */
- { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
- "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
-/* Set 18: MacBook Pro 2,2 */
- { "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
- "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
-/* Set 19: Macbook Pro 5,3 */
- { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D",
- "TG0F", "TG0H", "TG0P", "TG0T", "TN0D", "TN0P", "TTF0", "Th2H",
- "Tm0P", "Ts0P", "Ts0S", NULL },
-/* Set 20: MacBook Pro 5,4 */
- { "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TN0D",
- "TN0P", "TTF0", "Th2H", "Ts0P", "Ts0S", NULL },
-/* Set 21: MacBook Pro 6,2 */
- { "TB0T", "TB1T", "TB2T", "TC0C", "TC0D", "TC0P", "TC1C", "TG0D",
- "TG0P", "TG0T", "TMCD", "TP0P", "TPCD", "Th1H", "Th2H", "Tm0P",
- "Ts0P", "Ts0S", NULL },
-/* Set 22: MacBook Pro 7,1 */
- { "TB0T", "TB1T", "TB2T", "TC0D", "TC0P", "TN0D", "TN0P", "TN0S",
- "TN1D", "TN1F", "TN1G", "TN1S", "Th1H", "Ts0P", "Ts0S", NULL },
-};
+#define FAN_ID_FMT "F%dID" /* r-o char[16] */
/* List of keys used to read/write fan speeds */
-static const char* fan_speed_keys[] = {
- FAN_ACTUAL_SPEED,
- FAN_MIN_SPEED,
- FAN_MAX_SPEED,
- FAN_SAFE_SPEED,
- FAN_TARGET_SPEED
+static const char *const fan_speed_fmt[] = {
+ "F%dAc", /* actual speed */
+ "F%dMn", /* minimum speed (rw) */
+ "F%dMx", /* maximum speed */
+ "F%dSf", /* safe speed - not all models */
+ "F%dTg", /* target speed (manual: rw) */
};
#define INIT_TIMEOUT_MSECS 5000 /* wait up to 5s for device init ... */
@@ -184,14 +100,48 @@ static const char* fan_speed_keys[] = {
#define SENSOR_Y 1
#define SENSOR_Z 2
-/* Structure to be passed to DMI_MATCH function */
-struct dmi_match_data {
-/* Indicates whether this computer has an accelerometer. */
- int accelerometer;
-/* Indicates whether this computer has light sensors and keyboard backlight. */
- int light;
-/* Indicates which temperature sensors set to use. */
- int temperature_set;
+#define to_index(attr) (to_sensor_dev_attr(attr)->index & 0xffff)
+#define to_option(attr) (to_sensor_dev_attr(attr)->index >> 16)
+
+/* Dynamic device node attributes */
+struct applesmc_dev_attr {
+ struct sensor_device_attribute sda; /* hwmon attributes */
+ char name[32]; /* room for node file name */
+};
+
+/* Dynamic device node group */
+struct applesmc_node_group {
+ char *format; /* format string */
+ void *show; /* show function */
+ void *store; /* store function */
+ int option; /* function argument */
+ struct applesmc_dev_attr *nodes; /* dynamic node array */
+};
+
+/* AppleSMC entry - cached register information */
+struct applesmc_entry {
+ char key[5]; /* four-letter key code */
+ u8 valid; /* set when entry is successfully read once */
+ u8 len; /* bounded by APPLESMC_MAX_DATA_LENGTH */
+ char type[5]; /* four-letter type code */
+ u8 flags; /* 0x10: func; 0x40: write; 0x80: read */
+};
+
+/* Register lookup and registers common to all SMCs */
+static struct applesmc_registers {
+ struct mutex mutex; /* register read/write mutex */
+ unsigned int key_count; /* number of SMC registers */
+ unsigned int fan_count; /* number of fans */
+ unsigned int temp_count; /* number of temperature registers */
+ unsigned int temp_begin; /* temperature lower index bound */
+ unsigned int temp_end; /* temperature upper index bound */
+ int num_light_sensors; /* number of light sensors */
+ bool has_accelerometer; /* has motion sensor */
+ bool has_key_backlight; /* has keyboard backlight */
+ bool init_complete; /* true when fully initialized */
+ struct applesmc_entry *cache; /* cached key entries */
+} smcreg = {
+ .mutex = __MUTEX_INITIALIZER(smcreg.mutex),
};
static const int debug;
@@ -203,20 +153,6 @@ static u8 backlight_state[2];
static struct device *hwmon_dev;
static struct input_polled_dev *applesmc_idev;
-/* Indicates whether this computer has an accelerometer. */
-static unsigned int applesmc_accelerometer;
-
-/* Indicates whether this computer has light sensors and keyboard backlight. */
-static unsigned int applesmc_light;
-
-/* The number of fans handled by the driver */
-static unsigned int fans_handled;
-
-/* Indicates which temperature sensors set to use. */
-static unsigned int applesmc_temperature_set;
-
-static DEFINE_MUTEX(applesmc_lock);
-
/*
* Last index written to key_at_index sysfs file, and value to use for all other
* key_at_index_* sysfs files.
@@ -238,18 +174,10 @@ static int __wait_status(u8 val)
for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
udelay(us);
- if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == val) {
- if (debug)
- printk(KERN_DEBUG
- "Waited %d us for status %x\n",
- 2 * us - APPLESMC_MIN_WAIT, val);
+ if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == val)
return 0;
- }
}
- printk(KERN_WARNING "applesmc: wait status failed: %x != %x\n",
- val, inb(APPLESMC_CMD_PORT));
-
return -EIO;
}
@@ -267,159 +195,242 @@ static int send_command(u8 cmd)
if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == 0x0c)
return 0;
}
- printk(KERN_WARNING "applesmc: command failed: %x -> %x\n",
- cmd, inb(APPLESMC_CMD_PORT));
return -EIO;
}
-/*
- * applesmc_read_key - reads len bytes from a given key, and put them in buffer.
- * Returns zero on success or a negative error on failure. Callers must
- * hold applesmc_lock.
- */
-static int applesmc_read_key(const char* key, u8* buffer, u8 len)
+static int send_argument(const char *key)
{
int i;
- if (len > APPLESMC_MAX_DATA_LENGTH) {
- printk(KERN_ERR "applesmc_read_key: cannot read more than "
- "%d bytes\n", APPLESMC_MAX_DATA_LENGTH);
- return -EINVAL;
- }
-
- if (send_command(APPLESMC_READ_CMD))
- return -EIO;
-
for (i = 0; i < 4; i++) {
outb(key[i], APPLESMC_DATA_PORT);
if (__wait_status(0x04))
return -EIO;
}
- if (debug)
- printk(KERN_DEBUG "<%s", key);
+ return 0;
+}
+
+static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
+{
+ int i;
+
+ if (send_command(cmd) || send_argument(key)) {
+ pr_warn("%s: read arg fail\n", key);
+ return -EIO;
+ }
outb(len, APPLESMC_DATA_PORT);
- if (debug)
- printk(KERN_DEBUG ">%x", len);
for (i = 0; i < len; i++) {
- if (__wait_status(0x05))
+ if (__wait_status(0x05)) {
+ pr_warn("%s: read data fail\n", key);
return -EIO;
+ }
buffer[i] = inb(APPLESMC_DATA_PORT);
- if (debug)
- printk(KERN_DEBUG "<%x", buffer[i]);
}
- if (debug)
- printk(KERN_DEBUG "\n");
return 0;
}
-/*
- * applesmc_write_key - writes len bytes from buffer to a given key.
- * Returns zero on success or a negative error on failure. Callers must
- * hold applesmc_lock.
- */
-static int applesmc_write_key(const char* key, u8* buffer, u8 len)
+static int write_smc(u8 cmd, const char *key, const u8 *buffer, u8 len)
{
int i;
- if (len > APPLESMC_MAX_DATA_LENGTH) {
- printk(KERN_ERR "applesmc_write_key: cannot write more than "
- "%d bytes\n", APPLESMC_MAX_DATA_LENGTH);
- return -EINVAL;
- }
-
- if (send_command(APPLESMC_WRITE_CMD))
+ if (send_command(cmd) || send_argument(key)) {
+ pr_warn("%s: write arg fail\n", key);
return -EIO;
-
- for (i = 0; i < 4; i++) {
- outb(key[i], APPLESMC_DATA_PORT);
- if (__wait_status(0x04))
- return -EIO;
}
outb(len, APPLESMC_DATA_PORT);
for (i = 0; i < len; i++) {
- if (__wait_status(0x04))
+ if (__wait_status(0x04)) {
+ pr_warn("%s: write data fail\n", key);
return -EIO;
+ }
outb(buffer[i], APPLESMC_DATA_PORT);
}
return 0;
}
+static int read_register_count(unsigned int *count)
+{
+ __be32 be;
+ int ret;
+
+ ret = read_smc(APPLESMC_READ_CMD, KEY_COUNT_KEY, (u8 *)&be, 4);
+ if (ret)
+ return ret;
+
+ *count = be32_to_cpu(be);
+ return 0;
+}
+
/*
- * applesmc_get_key_at_index - get key at index, and put the result in key
- * (char[6]). Returns zero on success or a negative error on failure. Callers
- * must hold applesmc_lock.
+ * Serialized I/O
+ *
+ * Returns zero on success or a negative error on failure.
+ * All functions below are concurrency safe - callers should NOT hold lock.
*/
-static int applesmc_get_key_at_index(int index, char* key)
+
+static int applesmc_read_entry(const struct applesmc_entry *entry,
+ u8 *buf, u8 len)
{
- int i;
- u8 readkey[4];
- readkey[0] = index >> 24;
- readkey[1] = index >> 16;
- readkey[2] = index >> 8;
- readkey[3] = index;
+ int ret;
- if (send_command(APPLESMC_GET_KEY_BY_INDEX_CMD))
- return -EIO;
+ if (entry->len != len)
+ return -EINVAL;
+ mutex_lock(&smcreg.mutex);
+ ret = read_smc(APPLESMC_READ_CMD, entry->key, buf, len);
+ mutex_unlock(&smcreg.mutex);
- for (i = 0; i < 4; i++) {
- outb(readkey[i], APPLESMC_DATA_PORT);
- if (__wait_status(0x04))
- return -EIO;
+ return ret;
+}
+
+static int applesmc_write_entry(const struct applesmc_entry *entry,
+ const u8 *buf, u8 len)
+{
+ int ret;
+
+ if (entry->len != len)
+ return -EINVAL;
+ mutex_lock(&smcreg.mutex);
+ ret = write_smc(APPLESMC_WRITE_CMD, entry->key, buf, len);
+ mutex_unlock(&smcreg.mutex);
+ return ret;
+}
+
+static const struct applesmc_entry *applesmc_get_entry_by_index(int index)
+{
+ struct applesmc_entry *cache = &smcreg.cache[index];
+ u8 key[4], info[6];
+ __be32 be;
+ int ret = 0;
+
+ if (cache->valid)
+ return cache;
+
+ mutex_lock(&smcreg.mutex);
+
+ if (cache->valid)
+ goto out;
+ be = cpu_to_be32(index);
+ ret = read_smc(APPLESMC_GET_KEY_BY_INDEX_CMD, (u8 *)&be, key, 4);
+ if (ret)
+ goto out;
+ ret = read_smc(APPLESMC_GET_KEY_TYPE_CMD, key, info, 6);
+ if (ret)
+ goto out;
+
+ memcpy(cache->key, key, 4);
+ cache->len = info[0];
+ memcpy(cache->type, &info[1], 4);
+ cache->flags = info[5];
+ cache->valid = 1;
+
+out:
+ mutex_unlock(&smcreg.mutex);
+ if (ret)
+ return ERR_PTR(ret);
+ return cache;
+}
+
+static int applesmc_get_lower_bound(unsigned int *lo, const char *key)
+{
+ int begin = 0, end = smcreg.key_count;
+ const struct applesmc_entry *entry;
+
+ while (begin != end) {
+ int middle = begin + (end - begin) / 2;
+ entry = applesmc_get_entry_by_index(middle);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
+ if (strcmp(entry->key, key) < 0)
+ begin = middle + 1;
+ else
+ end = middle;
}
- outb(4, APPLESMC_DATA_PORT);
+ *lo = begin;
+ return 0;
+}
- for (i = 0; i < 4; i++) {
- if (__wait_status(0x05))
- return -EIO;
- key[i] = inb(APPLESMC_DATA_PORT);
+static int applesmc_get_upper_bound(unsigned int *hi, const char *key)
+{
+ int begin = 0, end = smcreg.key_count;
+ const struct applesmc_entry *entry;
+
+ while (begin != end) {
+ int middle = begin + (end - begin) / 2;
+ entry = applesmc_get_entry_by_index(middle);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
+ if (strcmp(key, entry->key) < 0)
+ end = middle;
+ else
+ begin = middle + 1;
}
- key[4] = 0;
+ *hi = begin;
return 0;
}
-/*
- * applesmc_get_key_type - get key type, and put the result in type (char[6]).
- * Returns zero on success or a negative error on failure. Callers must
- * hold applesmc_lock.
- */
-static int applesmc_get_key_type(char* key, char* type)
+static const struct applesmc_entry *applesmc_get_entry_by_key(const char *key)
{
- int i;
+ int begin, end;
+ int ret;
- if (send_command(APPLESMC_GET_KEY_TYPE_CMD))
- return -EIO;
+ ret = applesmc_get_lower_bound(&begin, key);
+ if (ret)
+ return ERR_PTR(ret);
+ ret = applesmc_get_upper_bound(&end, key);
+ if (ret)
+ return ERR_PTR(ret);
+ if (end - begin != 1)
+ return ERR_PTR(-EINVAL);
- for (i = 0; i < 4; i++) {
- outb(key[i], APPLESMC_DATA_PORT);
- if (__wait_status(0x04))
- return -EIO;
- }
+ return applesmc_get_entry_by_index(begin);
+}
- outb(6, APPLESMC_DATA_PORT);
+static int applesmc_read_key(const char *key, u8 *buffer, u8 len)
+{
+ const struct applesmc_entry *entry;
- for (i = 0; i < 6; i++) {
- if (__wait_status(0x05))
- return -EIO;
- type[i] = inb(APPLESMC_DATA_PORT);
- }
- type[5] = 0;
+ entry = applesmc_get_entry_by_key(key);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
+
+ return applesmc_read_entry(entry, buffer, len);
+}
+
+static int applesmc_write_key(const char *key, const u8 *buffer, u8 len)
+{
+ const struct applesmc_entry *entry;
+ entry = applesmc_get_entry_by_key(key);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
+
+ return applesmc_write_entry(entry, buffer, len);
+}
+
+static int applesmc_has_key(const char *key, bool *value)
+{
+ const struct applesmc_entry *entry;
+
+ entry = applesmc_get_entry_by_key(key);
+ if (IS_ERR(entry) && PTR_ERR(entry) != -EINVAL)
+ return PTR_ERR(entry);
+
+ *value = !IS_ERR(entry);
return 0;
}
/*
- * applesmc_read_motion_sensor - Read motion sensor (X, Y or Z). Callers must
- * hold applesmc_lock.
+ * applesmc_read_motion_sensor - Read motion sensor (X, Y or Z).
*/
-static int applesmc_read_motion_sensor(int index, s16* value)
+static int applesmc_read_motion_sensor(int index, s16 *value)
{
u8 buffer[2];
int ret;
@@ -444,69 +455,120 @@ static int applesmc_read_motion_sensor(int index, s16* value)
}
/*
- * applesmc_device_init - initialize the accelerometer. Returns zero on success
- * and negative error code on failure. Can sleep.
+ * applesmc_device_init - initialize the accelerometer. Can sleep.
*/
-static int applesmc_device_init(void)
+static void applesmc_device_init(void)
{
- int total, ret = -ENXIO;
+ int total;
u8 buffer[2];
- if (!applesmc_accelerometer)
- return 0;
-
- mutex_lock(&applesmc_lock);
+ if (!smcreg.has_accelerometer)
+ return;
for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
- if (debug)
- printk(KERN_DEBUG "applesmc try %d\n", total);
if (!applesmc_read_key(MOTION_SENSOR_KEY, buffer, 2) &&
- (buffer[0] != 0x00 || buffer[1] != 0x00)) {
- if (total == INIT_TIMEOUT_MSECS) {
- printk(KERN_DEBUG "applesmc: device has"
- " already been initialized"
- " (0x%02x, 0x%02x).\n",
- buffer[0], buffer[1]);
- } else {
- printk(KERN_DEBUG "applesmc: device"
- " successfully initialized"
- " (0x%02x, 0x%02x).\n",
- buffer[0], buffer[1]);
- }
- ret = 0;
- goto out;
- }
+ (buffer[0] != 0x00 || buffer[1] != 0x00))
+ return;
buffer[0] = 0xe0;
buffer[1] = 0x00;
applesmc_write_key(MOTION_SENSOR_KEY, buffer, 2);
msleep(INIT_WAIT_MSECS);
}
- printk(KERN_WARNING "applesmc: failed to init the device\n");
-
-out:
- mutex_unlock(&applesmc_lock);
- return ret;
+ pr_warn("failed to init the device\n");
}
/*
- * applesmc_get_fan_count - get the number of fans. Callers must NOT hold
- * applesmc_lock.
+ * applesmc_init_smcreg_try - Try to initialize register cache. Idempotent.
*/
-static int applesmc_get_fan_count(void)
+static int applesmc_init_smcreg_try(void)
{
+ struct applesmc_registers *s = &smcreg;
+ bool left_light_sensor, right_light_sensor;
+ u8 tmp[1];
int ret;
- u8 buffer[1];
- mutex_lock(&applesmc_lock);
+ if (s->init_complete)
+ return 0;
- ret = applesmc_read_key(FANS_COUNT, buffer, 1);
+ ret = read_register_count(&s->key_count);
+ if (ret)
+ return ret;
+
+ if (!s->cache)
+ s->cache = kcalloc(s->key_count, sizeof(*s->cache), GFP_KERNEL);
+ if (!s->cache)
+ return -ENOMEM;
- mutex_unlock(&applesmc_lock);
+ ret = applesmc_read_key(FANS_COUNT, tmp, 1);
if (ret)
return ret;
- else
- return buffer[0];
+ s->fan_count = tmp[0];
+
+ ret = applesmc_get_lower_bound(&s->temp_begin, "T");
+ if (ret)
+ return ret;
+ ret = applesmc_get_lower_bound(&s->temp_end, "U");
+ if (ret)
+ return ret;
+ s->temp_count = s->temp_end - s->temp_begin;
+
+ ret = applesmc_has_key(LIGHT_SENSOR_LEFT_KEY, &left_light_sensor);
+ if (ret)
+ return ret;
+ ret = applesmc_has_key(LIGHT_SENSOR_RIGHT_KEY, &right_light_sensor);
+ if (ret)
+ return ret;
+ ret = applesmc_has_key(MOTION_SENSOR_KEY, &s->has_accelerometer);
+ if (ret)
+ return ret;
+ ret = applesmc_has_key(BACKLIGHT_KEY, &s->has_key_backlight);
+ if (ret)
+ return ret;
+
+ s->num_light_sensors = left_light_sensor + right_light_sensor;
+ s->init_complete = true;
+
+ pr_info("key=%d fan=%d temp=%d acc=%d lux=%d kbd=%d\n",
+ s->key_count, s->fan_count, s->temp_count,
+ s->has_accelerometer,
+ s->num_light_sensors,
+ s->has_key_backlight);
+
+ return 0;
+}
+
+/*
+ * applesmc_init_smcreg - Initialize register cache.
+ *
+ * Retries until initialization is successful, or the operation times out.
+ *
+ */
+static int applesmc_init_smcreg(void)
+{
+ int ms, ret;
+
+ for (ms = 0; ms < INIT_TIMEOUT_MSECS; ms += INIT_WAIT_MSECS) {
+ ret = applesmc_init_smcreg_try();
+ if (!ret) {
+ if (ms)
+ pr_info("init_smcreg() took %d ms\n", ms);
+ return 0;
+ }
+ msleep(INIT_WAIT_MSECS);
+ }
+
+ kfree(smcreg.cache);
+ smcreg.cache = NULL;
+
+ return ret;
+}
+
+static void applesmc_destroy_smcreg(void)
+{
+ kfree(smcreg.cache);
+ smcreg.cache = NULL;
+ smcreg.init_complete = false;
}
/* Device model stuff */
@@ -514,30 +576,27 @@ static int applesmc_probe(struct platform_device *dev)
{
int ret;
- ret = applesmc_device_init();
+ ret = applesmc_init_smcreg();
if (ret)
return ret;
- printk(KERN_INFO "applesmc: device successfully initialized.\n");
+ applesmc_device_init();
+
return 0;
}
/* Synchronize device with memorized backlight state */
static int applesmc_pm_resume(struct device *dev)
{
- mutex_lock(&applesmc_lock);
- if (applesmc_light)
+ if (smcreg.has_key_backlight)
applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2);
- mutex_unlock(&applesmc_lock);
return 0;
}
/* Reinitialize device on resume from hibernation */
static int applesmc_pm_restore(struct device *dev)
{
- int ret = applesmc_device_init();
- if (ret)
- return ret;
+ applesmc_device_init();
return applesmc_pm_resume(dev);
}
@@ -571,20 +630,15 @@ static void applesmc_idev_poll(struct input_polled_dev *dev)
struct input_dev *idev = dev->input;
s16 x, y;
- mutex_lock(&applesmc_lock);
-
if (applesmc_read_motion_sensor(SENSOR_X, &x))
- goto out;
+ return;
if (applesmc_read_motion_sensor(SENSOR_Y, &y))
- goto out;
+ return;
x = -x;
input_report_abs(idev, ABS_X, x - rest_x);
input_report_abs(idev, ABS_Y, y - rest_y);
input_sync(idev);
-
-out:
- mutex_unlock(&applesmc_lock);
}
/* Sysfs Files */
@@ -601,8 +655,6 @@ static ssize_t applesmc_position_show(struct device *dev,
int ret;
s16 x, y, z;
- mutex_lock(&applesmc_lock);
-
ret = applesmc_read_motion_sensor(SENSOR_X, &x);
if (ret)
goto out;
@@ -614,7 +666,6 @@ static ssize_t applesmc_position_show(struct device *dev,
goto out;
out:
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -624,20 +675,20 @@ out:
static ssize_t applesmc_light_show(struct device *dev,
struct device_attribute *attr, char *sysfsbuf)
{
+ const struct applesmc_entry *entry;
static int data_length;
int ret;
u8 left = 0, right = 0;
- u8 buffer[10], query[6];
-
- mutex_lock(&applesmc_lock);
+ u8 buffer[10];
if (!data_length) {
- ret = applesmc_get_key_type(LIGHT_SENSOR_LEFT_KEY, query);
- if (ret)
- goto out;
- data_length = clamp_val(query[0], 0, 10);
- printk(KERN_INFO "applesmc: light sensor data length set to "
- "%d\n", data_length);
+ entry = applesmc_get_entry_by_key(LIGHT_SENSOR_LEFT_KEY);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
+ if (entry->len > 10)
+ return -ENXIO;
+ data_length = entry->len;
+ pr_info("light sensor data length set to %d\n", data_length);
}
ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, buffer, data_length);
@@ -653,7 +704,6 @@ static ssize_t applesmc_light_show(struct device *dev,
right = buffer[2];
out:
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -664,36 +714,44 @@ out:
static ssize_t applesmc_show_sensor_label(struct device *dev,
struct device_attribute *devattr, char *sysfsbuf)
{
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- const char *key =
- temperature_sensors_sets[applesmc_temperature_set][attr->index];
+ int index = smcreg.temp_begin + to_index(devattr);
+ const struct applesmc_entry *entry;
+
+ entry = applesmc_get_entry_by_index(index);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
- return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key);
+ return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->key);
}
/* Displays degree Celsius * 1000 */
static ssize_t applesmc_show_temperature(struct device *dev,
struct device_attribute *devattr, char *sysfsbuf)
{
+ int index = smcreg.temp_begin + to_index(devattr);
+ const struct applesmc_entry *entry;
int ret;
u8 buffer[2];
unsigned int temp;
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- const char* key =
- temperature_sensors_sets[applesmc_temperature_set][attr->index];
-
- mutex_lock(&applesmc_lock);
- ret = applesmc_read_key(key, buffer, 2);
- temp = buffer[0]*1000;
- temp += (buffer[1] >> 6) * 250;
-
- mutex_unlock(&applesmc_lock);
+ entry = applesmc_get_entry_by_index(index);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
+ if (entry->len > 2)
+ return -EINVAL;
+ ret = applesmc_read_entry(entry, buffer, entry->len);
if (ret)
return ret;
- else
- return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", temp);
+
+ if (entry->len == 2) {
+ temp = buffer[0] * 1000;
+ temp += (buffer[1] >> 6) * 250;
+ } else {
+ temp = buffer[0] * 4000;
+ }
+
+ return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", temp);
}
static ssize_t applesmc_show_fan_speed(struct device *dev,
@@ -703,21 +761,12 @@ static ssize_t applesmc_show_fan_speed(struct device *dev,
unsigned int speed = 0;
char newkey[5];
u8 buffer[2];
- struct sensor_device_attribute_2 *sensor_attr =
- to_sensor_dev_attr_2(attr);
-
- newkey[0] = fan_speed_keys[sensor_attr->nr][0];
- newkey[1] = '0' + sensor_attr->index;
- newkey[2] = fan_speed_keys[sensor_attr->nr][2];
- newkey[3] = fan_speed_keys[sensor_attr->nr][3];
- newkey[4] = 0;
- mutex_lock(&applesmc_lock);
+ sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
ret = applesmc_read_key(newkey, buffer, 2);
speed = ((buffer[0] << 8 | buffer[1]) >> 2);
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -729,30 +778,19 @@ static ssize_t applesmc_store_fan_speed(struct device *dev,
const char *sysfsbuf, size_t count)
{
int ret;
- u32 speed;
+ unsigned long speed;
char newkey[5];
u8 buffer[2];
- struct sensor_device_attribute_2 *sensor_attr =
- to_sensor_dev_attr_2(attr);
-
- speed = simple_strtoul(sysfsbuf, NULL, 10);
-
- if (speed > 0x4000) /* Bigger than a 14-bit value */
- return -EINVAL;
- newkey[0] = fan_speed_keys[sensor_attr->nr][0];
- newkey[1] = '0' + sensor_attr->index;
- newkey[2] = fan_speed_keys[sensor_attr->nr][2];
- newkey[3] = fan_speed_keys[sensor_attr->nr][3];
- newkey[4] = 0;
+ if (strict_strtoul(sysfsbuf, 10, &speed) < 0 || speed >= 0x4000)
+ return -EINVAL; /* Bigger than a 14-bit value */
- mutex_lock(&applesmc_lock);
+ sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
buffer[0] = (speed >> 6) & 0xff;
buffer[1] = (speed << 2) & 0xff;
ret = applesmc_write_key(newkey, buffer, 2);
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -760,19 +798,15 @@ static ssize_t applesmc_store_fan_speed(struct device *dev,
}
static ssize_t applesmc_show_fan_manual(struct device *dev,
- struct device_attribute *devattr, char *sysfsbuf)
+ struct device_attribute *attr, char *sysfsbuf)
{
int ret;
u16 manual = 0;
u8 buffer[2];
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
- mutex_lock(&applesmc_lock);
ret = applesmc_read_key(FANS_MANUAL, buffer, 2);
- manual = ((buffer[0] << 8 | buffer[1]) >> attr->index) & 0x01;
+ manual = ((buffer[0] << 8 | buffer[1]) >> to_index(attr)) & 0x01;
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -780,18 +814,16 @@ static ssize_t applesmc_show_fan_manual(struct device *dev,
}
static ssize_t applesmc_store_fan_manual(struct device *dev,
- struct device_attribute *devattr,
+ struct device_attribute *attr,
const char *sysfsbuf, size_t count)
{
int ret;
u8 buffer[2];
- u32 input;
+ unsigned long input;
u16 val;
- struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
- input = simple_strtoul(sysfsbuf, NULL, 10);
- mutex_lock(&applesmc_lock);
+ if (strict_strtoul(sysfsbuf, 10, &input) < 0)
+ return -EINVAL;
ret = applesmc_read_key(FANS_MANUAL, buffer, 2);
val = (buffer[0] << 8 | buffer[1]);
@@ -799,9 +831,9 @@ static ssize_t applesmc_store_fan_manual(struct device *dev,
goto out;
if (input)
- val = val | (0x01 << attr->index);
+ val = val | (0x01 << to_index(attr));
else
- val = val & ~(0x01 << attr->index);
+ val = val & ~(0x01 << to_index(attr));
buffer[0] = (val >> 8) & 0xFF;
buffer[1] = val & 0xFF;
@@ -809,7 +841,6 @@ static ssize_t applesmc_store_fan_manual(struct device *dev,
ret = applesmc_write_key(FANS_MANUAL, buffer, 2);
out:
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -822,21 +853,12 @@ static ssize_t applesmc_show_fan_position(struct device *dev,
int ret;
char newkey[5];
u8 buffer[17];
- struct sensor_device_attribute_2 *sensor_attr =
- to_sensor_dev_attr_2(attr);
-
- newkey[0] = FAN_POSITION[0];
- newkey[1] = '0' + sensor_attr->index;
- newkey[2] = FAN_POSITION[2];
- newkey[3] = FAN_POSITION[3];
- newkey[4] = 0;
- mutex_lock(&applesmc_lock);
+ sprintf(newkey, FAN_ID_FMT, to_index(attr));
ret = applesmc_read_key(newkey, buffer, 16);
buffer[16] = 0;
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -852,18 +874,14 @@ static ssize_t applesmc_calibrate_show(struct device *dev,
static ssize_t applesmc_calibrate_store(struct device *dev,
struct device_attribute *attr, const char *sysfsbuf, size_t count)
{
- mutex_lock(&applesmc_lock);
applesmc_calibrate();
- mutex_unlock(&applesmc_lock);
return count;
}
static void applesmc_backlight_set(struct work_struct *work)
{
- mutex_lock(&applesmc_lock);
applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2);
- mutex_unlock(&applesmc_lock);
}
static DECLARE_WORK(backlight_work, &applesmc_backlight_set);
@@ -886,13 +904,10 @@ static ssize_t applesmc_key_count_show(struct device *dev,
u8 buffer[4];
u32 count;
- mutex_lock(&applesmc_lock);
-
ret = applesmc_read_key(KEY_COUNT_KEY, buffer, 4);
count = ((u32)buffer[0]<<24) + ((u32)buffer[1]<<16) +
((u32)buffer[2]<<8) + buffer[3];
- mutex_unlock(&applesmc_lock);
if (ret)
return ret;
else
@@ -902,113 +917,53 @@ static ssize_t applesmc_key_count_show(struct device *dev,
static ssize_t applesmc_key_at_index_read_show(struct device *dev,
struct device_attribute *attr, char *sysfsbuf)
{
- char key[5];
- char info[6];
+ const struct applesmc_entry *entry;
int ret;
- mutex_lock(&applesmc_lock);
-
- ret = applesmc_get_key_at_index(key_at_index, key);
-
- if (ret || !key[0]) {
- mutex_unlock(&applesmc_lock);
-
- return -EINVAL;
- }
-
- ret = applesmc_get_key_type(key, info);
-
- if (ret) {
- mutex_unlock(&applesmc_lock);
-
+ entry = applesmc_get_entry_by_index(key_at_index);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
+ ret = applesmc_read_entry(entry, sysfsbuf, entry->len);
+ if (ret)
return ret;
- }
-
- /*
- * info[0] maximum value (APPLESMC_MAX_DATA_LENGTH) is much lower than
- * PAGE_SIZE, so we don't need any checks before writing to sysfsbuf.
- */
- ret = applesmc_read_key(key, sysfsbuf, info[0]);
-
- mutex_unlock(&applesmc_lock);
- if (!ret) {
- return info[0];
- } else {
- return ret;
- }
+ return entry->len;
}
static ssize_t applesmc_key_at_index_data_length_show(struct device *dev,
struct device_attribute *attr, char *sysfsbuf)
{
- char key[5];
- char info[6];
- int ret;
-
- mutex_lock(&applesmc_lock);
-
- ret = applesmc_get_key_at_index(key_at_index, key);
+ const struct applesmc_entry *entry;
- if (ret || !key[0]) {
- mutex_unlock(&applesmc_lock);
+ entry = applesmc_get_entry_by_index(key_at_index);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
- return -EINVAL;
- }
-
- ret = applesmc_get_key_type(key, info);
-
- mutex_unlock(&applesmc_lock);
-
- if (!ret)
- return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", info[0]);
- else
- return ret;
+ return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", entry->len);
}
static ssize_t applesmc_key_at_index_type_show(struct device *dev,
struct device_attribute *attr, char *sysfsbuf)
{
- char key[5];
- char info[6];
- int ret;
-
- mutex_lock(&applesmc_lock);
-
- ret = applesmc_get_key_at_index(key_at_index, key);
-
- if (ret || !key[0]) {
- mutex_unlock(&applesmc_lock);
-
- return -EINVAL;
- }
-
- ret = applesmc_get_key_type(key, info);
+ const struct applesmc_entry *entry;
- mutex_unlock(&applesmc_lock);
+ entry = applesmc_get_entry_by_index(key_at_index);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
- if (!ret)
- return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", info+1);
- else
- return ret;
+ return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->type);
}
static ssize_t applesmc_key_at_index_name_show(struct device *dev,
struct device_attribute *attr, char *sysfsbuf)
{
- char key[5];
- int ret;
+ const struct applesmc_entry *entry;
- mutex_lock(&applesmc_lock);
+ entry = applesmc_get_entry_by_index(key_at_index);
+ if (IS_ERR(entry))
+ return PTR_ERR(entry);
- ret = applesmc_get_key_at_index(key_at_index, key);
-
- mutex_unlock(&applesmc_lock);
-
- if (!ret && key[0])
- return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key);
- else
- return -EINVAL;
+ return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->key);
}
static ssize_t applesmc_key_at_index_show(struct device *dev,
@@ -1020,12 +975,13 @@ static ssize_t applesmc_key_at_index_show(struct device *dev,
static ssize_t applesmc_key_at_index_store(struct device *dev,
struct device_attribute *attr, const char *sysfsbuf, size_t count)
{
- mutex_lock(&applesmc_lock);
-
- key_at_index = simple_strtoul(sysfsbuf, NULL, 10);
+ unsigned long newkey;
- mutex_unlock(&applesmc_lock);
+ if (strict_strtoul(sysfsbuf, 10, &newkey) < 0
+ || newkey >= smcreg.key_count)
+ return -EINVAL;
+ key_at_index = newkey;
return count;
}
@@ -1035,387 +991,101 @@ static struct led_classdev applesmc_backlight = {
.brightness_set = applesmc_brightness_set,
};
-static DEVICE_ATTR(name, 0444, applesmc_name_show, NULL);
-
-static DEVICE_ATTR(position, 0444, applesmc_position_show, NULL);
-static DEVICE_ATTR(calibrate, 0644,
- applesmc_calibrate_show, applesmc_calibrate_store);
-
-static struct attribute *accelerometer_attributes[] = {
- &dev_attr_position.attr,
- &dev_attr_calibrate.attr,
- NULL
-};
-
-static const struct attribute_group accelerometer_attributes_group =
- { .attrs = accelerometer_attributes };
-
-static DEVICE_ATTR(light, 0444, applesmc_light_show, NULL);
-
-static DEVICE_ATTR(key_count, 0444, applesmc_key_count_show, NULL);
-static DEVICE_ATTR(key_at_index, 0644,
- applesmc_key_at_index_show, applesmc_key_at_index_store);
-static DEVICE_ATTR(key_at_index_name, 0444,
- applesmc_key_at_index_name_show, NULL);
-static DEVICE_ATTR(key_at_index_type, 0444,
- applesmc_key_at_index_type_show, NULL);
-static DEVICE_ATTR(key_at_index_data_length, 0444,
- applesmc_key_at_index_data_length_show, NULL);
-static DEVICE_ATTR(key_at_index_data, 0444,
- applesmc_key_at_index_read_show, NULL);
-
-static struct attribute *key_enumeration_attributes[] = {
- &dev_attr_key_count.attr,
- &dev_attr_key_at_index.attr,
- &dev_attr_key_at_index_name.attr,
- &dev_attr_key_at_index_type.attr,
- &dev_attr_key_at_index_data_length.attr,
- &dev_attr_key_at_index_data.attr,
- NULL
-};
-
-static const struct attribute_group key_enumeration_group =
- { .attrs = key_enumeration_attributes };
-
-/*
- * Macro defining SENSOR_DEVICE_ATTR for a fan sysfs entries.
- * - show actual speed
- * - show/store minimum speed
- * - show maximum speed
- * - show safe speed
- * - show/store target speed
- * - show/store manual mode
- */
-#define sysfs_fan_speeds_offset(offset) \
-static SENSOR_DEVICE_ATTR_2(fan##offset##_input, S_IRUGO, \
- applesmc_show_fan_speed, NULL, 0, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_min, S_IRUGO | S_IWUSR, \
- applesmc_show_fan_speed, applesmc_store_fan_speed, 1, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_max, S_IRUGO, \
- applesmc_show_fan_speed, NULL, 2, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_safe, S_IRUGO, \
- applesmc_show_fan_speed, NULL, 3, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_output, S_IRUGO | S_IWUSR, \
- applesmc_show_fan_speed, applesmc_store_fan_speed, 4, offset-1); \
-\
-static SENSOR_DEVICE_ATTR(fan##offset##_manual, S_IRUGO | S_IWUSR, \
- applesmc_show_fan_manual, applesmc_store_fan_manual, offset-1); \
-\
-static SENSOR_DEVICE_ATTR(fan##offset##_label, S_IRUGO, \
- applesmc_show_fan_position, NULL, offset-1); \
-\
-static struct attribute *fan##offset##_attributes[] = { \
- &sensor_dev_attr_fan##offset##_input.dev_attr.attr, \
- &sensor_dev_attr_fan##offset##_min.dev_attr.attr, \
- &sensor_dev_attr_fan##offset##_max.dev_attr.attr, \
- &sensor_dev_attr_fan##offset##_safe.dev_attr.attr, \
- &sensor_dev_attr_fan##offset##_output.dev_attr.attr, \
- &sensor_dev_attr_fan##offset##_manual.dev_attr.attr, \
- &sensor_dev_attr_fan##offset##_label.dev_attr.attr, \
- NULL \
+static struct applesmc_node_group info_group[] = {
+ { "name", applesmc_name_show },
+ { "key_count", applesmc_key_count_show },
+ { "key_at_index", applesmc_key_at_index_show, applesmc_key_at_index_store },
+ { "key_at_index_name", applesmc_key_at_index_name_show },
+ { "key_at_index_type", applesmc_key_at_index_type_show },
+ { "key_at_index_data_length", applesmc_key_at_index_data_length_show },
+ { "key_at_index_data", applesmc_key_at_index_read_show },
+ { }
};
-/*
- * Create the needed functions for each fan using the macro defined above
- * (4 fans are supported)
- */
-sysfs_fan_speeds_offset(1);
-sysfs_fan_speeds_offset(2);
-sysfs_fan_speeds_offset(3);
-sysfs_fan_speeds_offset(4);
-
-static const struct attribute_group fan_attribute_groups[] = {
- { .attrs = fan1_attributes },
- { .attrs = fan2_attributes },
- { .attrs = fan3_attributes },
- { .attrs = fan4_attributes },
+static struct applesmc_node_group accelerometer_group[] = {
+ { "position", applesmc_position_show },
+ { "calibrate", applesmc_calibrate_show, applesmc_calibrate_store },
+ { }
};
-/*
- * Temperature sensors sysfs entries.
- */
-static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 7);
-static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 8);
-static SENSOR_DEVICE_ATTR(temp10_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 9);
-static SENSOR_DEVICE_ATTR(temp11_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 10);
-static SENSOR_DEVICE_ATTR(temp12_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 11);
-static SENSOR_DEVICE_ATTR(temp13_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 12);
-static SENSOR_DEVICE_ATTR(temp14_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 13);
-static SENSOR_DEVICE_ATTR(temp15_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 14);
-static SENSOR_DEVICE_ATTR(temp16_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 15);
-static SENSOR_DEVICE_ATTR(temp17_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 16);
-static SENSOR_DEVICE_ATTR(temp18_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 17);
-static SENSOR_DEVICE_ATTR(temp19_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 18);
-static SENSOR_DEVICE_ATTR(temp20_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 19);
-static SENSOR_DEVICE_ATTR(temp21_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 20);
-static SENSOR_DEVICE_ATTR(temp22_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 21);
-static SENSOR_DEVICE_ATTR(temp23_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 22);
-static SENSOR_DEVICE_ATTR(temp24_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 23);
-static SENSOR_DEVICE_ATTR(temp25_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 24);
-static SENSOR_DEVICE_ATTR(temp26_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 25);
-static SENSOR_DEVICE_ATTR(temp27_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 26);
-static SENSOR_DEVICE_ATTR(temp28_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 27);
-static SENSOR_DEVICE_ATTR(temp29_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 28);
-static SENSOR_DEVICE_ATTR(temp30_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 29);
-static SENSOR_DEVICE_ATTR(temp31_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 30);
-static SENSOR_DEVICE_ATTR(temp32_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 31);
-static SENSOR_DEVICE_ATTR(temp33_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 32);
-static SENSOR_DEVICE_ATTR(temp34_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 33);
-static SENSOR_DEVICE_ATTR(temp35_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 34);
-static SENSOR_DEVICE_ATTR(temp36_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 35);
-static SENSOR_DEVICE_ATTR(temp37_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 36);
-static SENSOR_DEVICE_ATTR(temp38_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 37);
-static SENSOR_DEVICE_ATTR(temp39_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 38);
-static SENSOR_DEVICE_ATTR(temp40_label, S_IRUGO,
- applesmc_show_sensor_label, NULL, 39);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
- applesmc_show_temperature, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO,
- applesmc_show_temperature, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO,
- applesmc_show_temperature, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO,
- applesmc_show_temperature, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO,
- applesmc_show_temperature, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO,
- applesmc_show_temperature, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO,
- applesmc_show_temperature, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO,
- applesmc_show_temperature, NULL, 7);
-static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO,
- applesmc_show_temperature, NULL, 8);
-static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO,
- applesmc_show_temperature, NULL, 9);
-static SENSOR_DEVICE_ATTR(temp11_input, S_IRUGO,
- applesmc_show_temperature, NULL, 10);
-static SENSOR_DEVICE_ATTR(temp12_input, S_IRUGO,
- applesmc_show_temperature, NULL, 11);
-static SENSOR_DEVICE_ATTR(temp13_input, S_IRUGO,
- applesmc_show_temperature, NULL, 12);
-static SENSOR_DEVICE_ATTR(temp14_input, S_IRUGO,
- applesmc_show_temperature, NULL, 13);
-static SENSOR_DEVICE_ATTR(temp15_input, S_IRUGO,
- applesmc_show_temperature, NULL, 14);
-static SENSOR_DEVICE_ATTR(temp16_input, S_IRUGO,
- applesmc_show_temperature, NULL, 15);
-static SENSOR_DEVICE_ATTR(temp17_input, S_IRUGO,
- applesmc_show_temperature, NULL, 16);
-static SENSOR_DEVICE_ATTR(temp18_input, S_IRUGO,
- applesmc_show_temperature, NULL, 17);
-static SENSOR_DEVICE_ATTR(temp19_input, S_IRUGO,
- applesmc_show_temperature, NULL, 18);
-static SENSOR_DEVICE_ATTR(temp20_input, S_IRUGO,
- applesmc_show_temperature, NULL, 19);
-static SENSOR_DEVICE_ATTR(temp21_input, S_IRUGO,
- applesmc_show_temperature, NULL, 20);
-static SENSOR_DEVICE_ATTR(temp22_input, S_IRUGO,
- applesmc_show_temperature, NULL, 21);
-static SENSOR_DEVICE_ATTR(temp23_input, S_IRUGO,
- applesmc_show_temperature, NULL, 22);
-static SENSOR_DEVICE_ATTR(temp24_input, S_IRUGO,
- applesmc_show_temperature, NULL, 23);
-static SENSOR_DEVICE_ATTR(temp25_input, S_IRUGO,
- applesmc_show_temperature, NULL, 24);
-static SENSOR_DEVICE_ATTR(temp26_input, S_IRUGO,
- applesmc_show_temperature, NULL, 25);
-static SENSOR_DEVICE_ATTR(temp27_input, S_IRUGO,
- applesmc_show_temperature, NULL, 26);
-static SENSOR_DEVICE_ATTR(temp28_input, S_IRUGO,
- applesmc_show_temperature, NULL, 27);
-static SENSOR_DEVICE_ATTR(temp29_input, S_IRUGO,
- applesmc_show_temperature, NULL, 28);
-static SENSOR_DEVICE_ATTR(temp30_input, S_IRUGO,
- applesmc_show_temperature, NULL, 29);
-static SENSOR_DEVICE_ATTR(temp31_input, S_IRUGO,
- applesmc_show_temperature, NULL, 30);
-static SENSOR_DEVICE_ATTR(temp32_input, S_IRUGO,
- applesmc_show_temperature, NULL, 31);
-static SENSOR_DEVICE_ATTR(temp33_input, S_IRUGO,
- applesmc_show_temperature, NULL, 32);
-static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO,
- applesmc_show_temperature, NULL, 33);
-static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO,
- applesmc_show_temperature, NULL, 34);
-static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO,
- applesmc_show_temperature, NULL, 35);
-static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO,
- applesmc_show_temperature, NULL, 36);
-static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO,
- applesmc_show_temperature, NULL, 37);
-static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO,
- applesmc_show_temperature, NULL, 38);
-static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
- applesmc_show_temperature, NULL, 39);
-
-static struct attribute *label_attributes[] = {
- &sensor_dev_attr_temp1_label.dev_attr.attr,
- &sensor_dev_attr_temp2_label.dev_attr.attr,
- &sensor_dev_attr_temp3_label.dev_attr.attr,
- &sensor_dev_attr_temp4_label.dev_attr.attr,
- &sensor_dev_attr_temp5_label.dev_attr.attr,
- &sensor_dev_attr_temp6_label.dev_attr.attr,
- &sensor_dev_attr_temp7_label.dev_attr.attr,
- &sensor_dev_attr_temp8_label.dev_attr.attr,
- &sensor_dev_attr_temp9_label.dev_attr.attr,
- &sensor_dev_attr_temp10_label.dev_attr.attr,
- &sensor_dev_attr_temp11_label.dev_attr.attr,
- &sensor_dev_attr_temp12_label.dev_attr.attr,
- &sensor_dev_attr_temp13_label.dev_attr.attr,
- &sensor_dev_attr_temp14_label.dev_attr.attr,
- &sensor_dev_attr_temp15_label.dev_attr.attr,
- &sensor_dev_attr_temp16_label.dev_attr.attr,
- &sensor_dev_attr_temp17_label.dev_attr.attr,
- &sensor_dev_attr_temp18_label.dev_attr.attr,
- &sensor_dev_attr_temp19_label.dev_attr.attr,
- &sensor_dev_attr_temp20_label.dev_attr.attr,
- &sensor_dev_attr_temp21_label.dev_attr.attr,
- &sensor_dev_attr_temp22_label.dev_attr.attr,
- &sensor_dev_attr_temp23_label.dev_attr.attr,
- &sensor_dev_attr_temp24_label.dev_attr.attr,
- &sensor_dev_attr_temp25_label.dev_attr.attr,
- &sensor_dev_attr_temp26_label.dev_attr.attr,
- &sensor_dev_attr_temp27_label.dev_attr.attr,
- &sensor_dev_attr_temp28_label.dev_attr.attr,
- &sensor_dev_attr_temp29_label.dev_attr.attr,
- &sensor_dev_attr_temp30_label.dev_attr.attr,
- &sensor_dev_attr_temp31_label.dev_attr.attr,
- &sensor_dev_attr_temp32_label.dev_attr.attr,
- &sensor_dev_attr_temp33_label.dev_attr.attr,
- &sensor_dev_attr_temp34_label.dev_attr.attr,
- &sensor_dev_attr_temp35_label.dev_attr.attr,
- &sensor_dev_attr_temp36_label.dev_attr.attr,
- &sensor_dev_attr_temp37_label.dev_attr.attr,
- &sensor_dev_attr_temp38_label.dev_attr.attr,
- &sensor_dev_attr_temp39_label.dev_attr.attr,
- &sensor_dev_attr_temp40_label.dev_attr.attr,
- NULL
+static struct applesmc_node_group light_sensor_group[] = {
+ { "light", applesmc_light_show },
+ { }
};
-static struct attribute *temperature_attributes[] = {
- &sensor_dev_attr_temp1_input.dev_attr.attr,
- &sensor_dev_attr_temp2_input.dev_attr.attr,
- &sensor_dev_attr_temp3_input.dev_attr.attr,
- &sensor_dev_attr_temp4_input.dev_attr.attr,
- &sensor_dev_attr_temp5_input.dev_attr.attr,
- &sensor_dev_attr_temp6_input.dev_attr.attr,
- &sensor_dev_attr_temp7_input.dev_attr.attr,
- &sensor_dev_attr_temp8_input.dev_attr.attr,
- &sensor_dev_attr_temp9_input.dev_attr.attr,
- &sensor_dev_attr_temp10_input.dev_attr.attr,
- &sensor_dev_attr_temp11_input.dev_attr.attr,
- &sensor_dev_attr_temp12_input.dev_attr.attr,
- &sensor_dev_attr_temp13_input.dev_attr.attr,
- &sensor_dev_attr_temp14_input.dev_attr.attr,
- &sensor_dev_attr_temp15_input.dev_attr.attr,
- &sensor_dev_attr_temp16_input.dev_attr.attr,
- &sensor_dev_attr_temp17_input.dev_attr.attr,
- &sensor_dev_attr_temp18_input.dev_attr.attr,
- &sensor_dev_attr_temp19_input.dev_attr.attr,
- &sensor_dev_attr_temp20_input.dev_attr.attr,
- &sensor_dev_attr_temp21_input.dev_attr.attr,
- &sensor_dev_attr_temp22_input.dev_attr.attr,
- &sensor_dev_attr_temp23_input.dev_attr.attr,
- &sensor_dev_attr_temp24_input.dev_attr.attr,
- &sensor_dev_attr_temp25_input.dev_attr.attr,
- &sensor_dev_attr_temp26_input.dev_attr.attr,
- &sensor_dev_attr_temp27_input.dev_attr.attr,
- &sensor_dev_attr_temp28_input.dev_attr.attr,
- &sensor_dev_attr_temp29_input.dev_attr.attr,
- &sensor_dev_attr_temp30_input.dev_attr.attr,
- &sensor_dev_attr_temp31_input.dev_attr.attr,
- &sensor_dev_attr_temp32_input.dev_attr.attr,
- &sensor_dev_attr_temp33_input.dev_attr.attr,
- &sensor_dev_attr_temp34_input.dev_attr.attr,
- &sensor_dev_attr_temp35_input.dev_attr.attr,
- &sensor_dev_attr_temp36_input.dev_attr.attr,
- &sensor_dev_attr_temp37_input.dev_attr.attr,
- &sensor_dev_attr_temp38_input.dev_attr.attr,
- &sensor_dev_attr_temp39_input.dev_attr.attr,
- &sensor_dev_attr_temp40_input.dev_attr.attr,
- NULL
+static struct applesmc_node_group fan_group[] = {
+ { "fan%d_label", applesmc_show_fan_position },
+ { "fan%d_input", applesmc_show_fan_speed, NULL, 0 },
+ { "fan%d_min", applesmc_show_fan_speed, applesmc_store_fan_speed, 1 },
+ { "fan%d_max", applesmc_show_fan_speed, NULL, 2 },
+ { "fan%d_safe", applesmc_show_fan_speed, NULL, 3 },
+ { "fan%d_output", applesmc_show_fan_speed, applesmc_store_fan_speed, 4 },
+ { "fan%d_manual", applesmc_show_fan_manual, applesmc_store_fan_manual },
+ { }
};
-static const struct attribute_group temperature_attributes_group =
- { .attrs = temperature_attributes };
-
-static const struct attribute_group label_attributes_group = {
- .attrs = label_attributes
+static struct applesmc_node_group temp_group[] = {
+ { "temp%d_label", applesmc_show_sensor_label },
+ { "temp%d_input", applesmc_show_temperature },
+ { }
};
/* Module stuff */
/*
- * applesmc_dmi_match - found a match. return one, short-circuiting the hunt.
+ * applesmc_destroy_nodes - remove files and free associated memory
*/
-static int applesmc_dmi_match(const struct dmi_system_id *id)
+static void applesmc_destroy_nodes(struct applesmc_node_group *groups)
{
- int i = 0;
- struct dmi_match_data* dmi_data = id->driver_data;
- printk(KERN_INFO "applesmc: %s detected:\n", id->ident);
- applesmc_accelerometer = dmi_data->accelerometer;
- printk(KERN_INFO "applesmc: - Model %s accelerometer\n",
- applesmc_accelerometer ? "with" : "without");
- applesmc_light = dmi_data->light;
- printk(KERN_INFO "applesmc: - Model %s light sensors and backlight\n",
- applesmc_light ? "with" : "without");
-
- applesmc_temperature_set = dmi_data->temperature_set;
- while (temperature_sensors_sets[applesmc_temperature_set][i] != NULL)
- i++;
- printk(KERN_INFO "applesmc: - Model with %d temperature sensors\n", i);
- return 1;
+ struct applesmc_node_group *grp;
+ struct applesmc_dev_attr *node;
+
+ for (grp = groups; grp->nodes; grp++) {
+ for (node = grp->nodes; node->sda.dev_attr.attr.name; node++)
+ sysfs_remove_file(&pdev->dev.kobj,
+ &node->sda.dev_attr.attr);
+ kfree(grp->nodes);
+ grp->nodes = NULL;
+ }
+}
+
+/*
+ * applesmc_create_nodes - create a two-dimensional group of sysfs files
+ */
+static int applesmc_create_nodes(struct applesmc_node_group *groups, int num)
+{
+ struct applesmc_node_group *grp;
+ struct applesmc_dev_attr *node;
+ struct attribute *attr;
+ int ret, i;
+
+ for (grp = groups; grp->format; grp++) {
+ grp->nodes = kcalloc(num + 1, sizeof(*node), GFP_KERNEL);
+ if (!grp->nodes) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ for (i = 0; i < num; i++) {
+ node = &grp->nodes[i];
+ sprintf(node->name, grp->format, i + 1);
+ node->sda.index = (grp->option << 16) | (i & 0xffff);
+ node->sda.dev_attr.show = grp->show;
+ node->sda.dev_attr.store = grp->store;
+ attr = &node->sda.dev_attr.attr;
+ attr->name = node->name;
+ attr->mode = S_IRUGO | (grp->store ? S_IWUSR : 0);
+ ret = sysfs_create_file(&pdev->dev.kobj, attr);
+ if (ret) {
+ attr->name = NULL;
+ goto out;
+ }
+ }
+ }
+
+ return 0;
+out:
+ applesmc_destroy_nodes(groups);
+ return ret;
}
/* Create accelerometer ressources */
@@ -1424,8 +1094,10 @@ static int applesmc_create_accelerometer(void)
struct input_dev *idev;
int ret;
- ret = sysfs_create_group(&pdev->dev.kobj,
- &accelerometer_attributes_group);
+ if (!smcreg.has_accelerometer)
+ return 0;
+
+ ret = applesmc_create_nodes(accelerometer_group, 1);
if (ret)
goto out;
@@ -1462,184 +1134,96 @@ out_idev:
input_free_polled_device(applesmc_idev);
out_sysfs:
- sysfs_remove_group(&pdev->dev.kobj, &accelerometer_attributes_group);
+ applesmc_destroy_nodes(accelerometer_group);
out:
- printk(KERN_WARNING "applesmc: driver init failed (ret=%d)!\n", ret);
+ pr_warn("driver init failed (ret=%d)!\n", ret);
return ret;
}
/* Release all ressources used by the accelerometer */
static void applesmc_release_accelerometer(void)
{
+ if (!smcreg.has_accelerometer)
+ return;
input_unregister_polled_device(applesmc_idev);
input_free_polled_device(applesmc_idev);
- sysfs_remove_group(&pdev->dev.kobj, &accelerometer_attributes_group);
+ applesmc_destroy_nodes(accelerometer_group);
}
-static __initdata struct dmi_match_data applesmc_dmi_data[] = {
-/* MacBook Pro: accelerometer, backlight and temperature set 0 */
- { .accelerometer = 1, .light = 1, .temperature_set = 0 },
-/* MacBook2: accelerometer and temperature set 1 */
- { .accelerometer = 1, .light = 0, .temperature_set = 1 },
-/* MacBook: accelerometer and temperature set 2 */
- { .accelerometer = 1, .light = 0, .temperature_set = 2 },
-/* MacMini: temperature set 3 */
- { .accelerometer = 0, .light = 0, .temperature_set = 3 },
-/* MacPro: temperature set 4 */
- { .accelerometer = 0, .light = 0, .temperature_set = 4 },
-/* iMac: temperature set 5 */
- { .accelerometer = 0, .light = 0, .temperature_set = 5 },
-/* MacBook3, MacBook4: accelerometer and temperature set 6 */
- { .accelerometer = 1, .light = 0, .temperature_set = 6 },
-/* MacBook Air: accelerometer, backlight and temperature set 7 */
- { .accelerometer = 1, .light = 1, .temperature_set = 7 },
-/* MacBook Pro 4: accelerometer, backlight and temperature set 8 */
- { .accelerometer = 1, .light = 1, .temperature_set = 8 },
-/* MacBook Pro 3: accelerometer, backlight and temperature set 9 */
- { .accelerometer = 1, .light = 1, .temperature_set = 9 },
-/* iMac 5: light sensor only, temperature set 10 */
- { .accelerometer = 0, .light = 0, .temperature_set = 10 },
-/* MacBook 5: accelerometer, backlight and temperature set 11 */
- { .accelerometer = 1, .light = 1, .temperature_set = 11 },
-/* MacBook Pro 5: accelerometer, backlight and temperature set 12 */
- { .accelerometer = 1, .light = 1, .temperature_set = 12 },
-/* iMac 8: light sensor only, temperature set 13 */
- { .accelerometer = 0, .light = 0, .temperature_set = 13 },
-/* iMac 6: light sensor only, temperature set 14 */
- { .accelerometer = 0, .light = 0, .temperature_set = 14 },
-/* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */
- { .accelerometer = 1, .light = 1, .temperature_set = 15 },
-/* MacPro3,1: temperature set 16 */
- { .accelerometer = 0, .light = 0, .temperature_set = 16 },
-/* iMac 9,1: light sensor only, temperature set 17 */
- { .accelerometer = 0, .light = 0, .temperature_set = 17 },
-/* MacBook Pro 2,2: accelerometer, backlight and temperature set 18 */
- { .accelerometer = 1, .light = 1, .temperature_set = 18 },
-/* MacBook Pro 5,3: accelerometer, backlight and temperature set 19 */
- { .accelerometer = 1, .light = 1, .temperature_set = 19 },
-/* MacBook Pro 5,4: accelerometer, backlight and temperature set 20 */
- { .accelerometer = 1, .light = 1, .temperature_set = 20 },
-/* MacBook Pro 6,2: accelerometer, backlight and temperature set 21 */
- { .accelerometer = 1, .light = 1, .temperature_set = 21 },
-/* MacBook Pro 7,1: accelerometer, backlight and temperature set 22 */
- { .accelerometer = 1, .light = 1, .temperature_set = 22 },
-};
+static int applesmc_create_light_sensor(void)
+{
+ if (!smcreg.num_light_sensors)
+ return 0;
+ return applesmc_create_nodes(light_sensor_group, 1);
+}
+
+static void applesmc_release_light_sensor(void)
+{
+ if (!smcreg.num_light_sensors)
+ return;
+ applesmc_destroy_nodes(light_sensor_group);
+}
+
+static int applesmc_create_key_backlight(void)
+{
+ if (!smcreg.has_key_backlight)
+ return 0;
+ applesmc_led_wq = create_singlethread_workqueue("applesmc-led");
+ if (!applesmc_led_wq)
+ return -ENOMEM;
+ return led_classdev_register(&pdev->dev, &applesmc_backlight);
+}
+
+static void applesmc_release_key_backlight(void)
+{
+ if (!smcreg.has_key_backlight)
+ return;
+ led_classdev_unregister(&applesmc_backlight);
+ destroy_workqueue(applesmc_led_wq);
+}
+
+static int applesmc_dmi_match(const struct dmi_system_id *id)
+{
+ return 1;
+}
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
* So we need to put "Apple MacBook Pro" before "Apple MacBook". */
static __initdata struct dmi_system_id applesmc_whitelist[] = {
- { applesmc_dmi_match, "Apple MacBook Air 2", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir2") },
- &applesmc_dmi_data[15]},
{ applesmc_dmi_match, "Apple MacBook Air", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") },
- &applesmc_dmi_data[7]},
- { applesmc_dmi_match, "Apple MacBook Pro 7", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro7") },
- &applesmc_dmi_data[22]},
- { applesmc_dmi_match, "Apple MacBook Pro 5,4", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4") },
- &applesmc_dmi_data[20]},
- { applesmc_dmi_match, "Apple MacBook Pro 5,3", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3") },
- &applesmc_dmi_data[19]},
- { applesmc_dmi_match, "Apple MacBook Pro 6", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6") },
- &applesmc_dmi_data[21]},
- { applesmc_dmi_match, "Apple MacBook Pro 5", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") },
- &applesmc_dmi_data[12]},
- { applesmc_dmi_match, "Apple MacBook Pro 4", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4") },
- &applesmc_dmi_data[8]},
- { applesmc_dmi_match, "Apple MacBook Pro 3", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
- &applesmc_dmi_data[9]},
- { applesmc_dmi_match, "Apple MacBook Pro 2,2", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
- &applesmc_dmi_data[18]},
+ },
{ applesmc_dmi_match, "Apple MacBook Pro", {
- DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
- &applesmc_dmi_data[0]},
- { applesmc_dmi_match, "Apple MacBook (v2)", {
- DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
- &applesmc_dmi_data[1]},
- { applesmc_dmi_match, "Apple MacBook (v3)", {
- DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
- &applesmc_dmi_data[6]},
- { applesmc_dmi_match, "Apple MacBook 4", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") },
- &applesmc_dmi_data[6]},
- { applesmc_dmi_match, "Apple MacBook 5", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") },
- &applesmc_dmi_data[11]},
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro") },
+ },
{ applesmc_dmi_match, "Apple MacBook", {
- DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
- &applesmc_dmi_data[2]},
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
+ },
{ applesmc_dmi_match, "Apple Macmini", {
- DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") },
- &applesmc_dmi_data[3]},
- { applesmc_dmi_match, "Apple MacPro2", {
- DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
- &applesmc_dmi_data[4]},
- { applesmc_dmi_match, "Apple MacPro3", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") },
- &applesmc_dmi_data[16]},
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini") },
+ },
{ applesmc_dmi_match, "Apple MacPro", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
- &applesmc_dmi_data[4]},
- { applesmc_dmi_match, "Apple iMac 9,1", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
- &applesmc_dmi_data[17]},
- { applesmc_dmi_match, "Apple iMac 8", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
- &applesmc_dmi_data[13]},
- { applesmc_dmi_match, "Apple iMac 6", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "iMac6") },
- &applesmc_dmi_data[14]},
- { applesmc_dmi_match, "Apple iMac 5", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") },
- &applesmc_dmi_data[10]},
+ },
{ applesmc_dmi_match, "Apple iMac", {
- DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
- &applesmc_dmi_data[5]},
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iMac") },
+ },
{ .ident = NULL }
};
static int __init applesmc_init(void)
{
int ret;
- int count;
- int i;
if (!dmi_check_system(applesmc_whitelist)) {
- printk(KERN_WARNING "applesmc: supported laptop not found!\n");
+ pr_warn("supported laptop not found!\n");
ret = -ENODEV;
goto out;
}
@@ -1661,83 +1245,34 @@ static int __init applesmc_init(void)
goto out_driver;
}
- ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_name.attr);
+ /* create register cache */
+ ret = applesmc_init_smcreg();
if (ret)
goto out_device;
- /* Create key enumeration sysfs files */
- ret = sysfs_create_group(&pdev->dev.kobj, &key_enumeration_group);
+ ret = applesmc_create_nodes(info_group, 1);
if (ret)
- goto out_name;
-
- /* create fan files */
- count = applesmc_get_fan_count();
- if (count < 0)
- printk(KERN_ERR "applesmc: Cannot get the number of fans.\n");
- else
- printk(KERN_INFO "applesmc: %d fans found.\n", count);
+ goto out_smcreg;
- if (count > 4) {
- count = 4;
- printk(KERN_WARNING "applesmc: More than 4 fans found,"
- " but at most 4 fans are supported"
- " by the driver.\n");
- }
-
- while (fans_handled < count) {
- ret = sysfs_create_group(&pdev->dev.kobj,
- &fan_attribute_groups[fans_handled]);
- if (ret)
- goto out_fans;
- fans_handled++;
- }
-
- for (i = 0;
- temperature_sensors_sets[applesmc_temperature_set][i] != NULL;
- i++) {
- if (temperature_attributes[i] == NULL ||
- label_attributes[i] == NULL) {
- printk(KERN_ERR "applesmc: More temperature sensors "
- "in temperature_sensors_sets (at least %i)"
- "than available sysfs files in "
- "temperature_attributes (%i), please report "
- "this bug.\n", i, i-1);
- goto out_temperature;
- }
- ret = sysfs_create_file(&pdev->dev.kobj,
- temperature_attributes[i]);
- if (ret)
- goto out_temperature;
- ret = sysfs_create_file(&pdev->dev.kobj,
- label_attributes[i]);
- if (ret)
- goto out_temperature;
- }
+ ret = applesmc_create_nodes(fan_group, smcreg.fan_count);
+ if (ret)
+ goto out_info;
- if (applesmc_accelerometer) {
- ret = applesmc_create_accelerometer();
- if (ret)
- goto out_temperature;
- }
+ ret = applesmc_create_nodes(temp_group, smcreg.temp_count);
+ if (ret)
+ goto out_fans;
- if (applesmc_light) {
- /* Add light sensor file */
- ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_light.attr);
- if (ret)
- goto out_accelerometer;
+ ret = applesmc_create_accelerometer();
+ if (ret)
+ goto out_temperature;
- /* Create the workqueue */
- applesmc_led_wq = create_singlethread_workqueue("applesmc-led");
- if (!applesmc_led_wq) {
- ret = -ENOMEM;
- goto out_light_sysfs;
- }
+ ret = applesmc_create_light_sensor();
+ if (ret)
+ goto out_accelerometer;
- /* register as a led device */
- ret = led_classdev_register(&pdev->dev, &applesmc_backlight);
- if (ret < 0)
- goto out_light_wq;
- }
+ ret = applesmc_create_key_backlight();
+ if (ret)
+ goto out_light_sysfs;
hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(hwmon_dev)) {
@@ -1745,32 +1280,22 @@ static int __init applesmc_init(void)
goto out_light_ledclass;
}
- printk(KERN_INFO "applesmc: driver successfully loaded.\n");
-
return 0;
out_light_ledclass:
- if (applesmc_light)
- led_classdev_unregister(&applesmc_backlight);
-out_light_wq:
- if (applesmc_light)
- destroy_workqueue(applesmc_led_wq);
+ applesmc_release_key_backlight();
out_light_sysfs:
- if (applesmc_light)
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr);
+ applesmc_release_light_sensor();
out_accelerometer:
- if (applesmc_accelerometer)
- applesmc_release_accelerometer();
+ applesmc_release_accelerometer();
out_temperature:
- sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
- sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
+ applesmc_destroy_nodes(temp_group);
out_fans:
- while (fans_handled)
- sysfs_remove_group(&pdev->dev.kobj,
- &fan_attribute_groups[--fans_handled]);
- sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group);
-out_name:
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr);
+ applesmc_destroy_nodes(fan_group);
+out_info:
+ applesmc_destroy_nodes(info_group);
+out_smcreg:
+ applesmc_destroy_smcreg();
out_device:
platform_device_unregister(pdev);
out_driver:
@@ -1778,32 +1303,23 @@ out_driver:
out_region:
release_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS);
out:
- printk(KERN_WARNING "applesmc: driver init failed (ret=%d)!\n", ret);
+ pr_warn("driver init failed (ret=%d)!\n", ret);
return ret;
}
static void __exit applesmc_exit(void)
{
hwmon_device_unregister(hwmon_dev);
- if (applesmc_light) {
- led_classdev_unregister(&applesmc_backlight);
- destroy_workqueue(applesmc_led_wq);
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr);
- }
- if (applesmc_accelerometer)
- applesmc_release_accelerometer();
- sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
- sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
- while (fans_handled)
- sysfs_remove_group(&pdev->dev.kobj,
- &fan_attribute_groups[--fans_handled]);
- sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group);
- sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr);
+ applesmc_release_key_backlight();
+ applesmc_release_light_sensor();
+ applesmc_release_accelerometer();
+ applesmc_destroy_nodes(temp_group);
+ applesmc_destroy_nodes(fan_group);
+ applesmc_destroy_nodes(info_group);
+ applesmc_destroy_smcreg();
platform_device_unregister(pdev);
platform_driver_unregister(&applesmc_driver);
release_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS);
-
- printk(KERN_INFO "applesmc: driver unloaded.\n");
}
module_init(applesmc_init);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 7dada559b3a1..c02a052d3085 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -36,6 +36,8 @@
asb100 7 3 1 4 0x31 0x0694 yes no
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
@@ -701,8 +703,7 @@ static int asb100_detect(struct i2c_client *client,
int val1, val2;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- pr_debug("asb100.o: detect failed, "
- "smbus byte data not supported!\n");
+ pr_debug("detect failed, smbus byte data not supported!\n");
return -ENODEV;
}
@@ -715,7 +716,7 @@ static int asb100_detect(struct i2c_client *client,
(((!(val1 & 0x80)) && (val2 != 0x94)) ||
/* Check for ASB100 ID (high byte ) */
((val1 & 0x80) && (val2 != 0x06)))) {
- pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2);
+ pr_debug("detect failed, bad chip id 0x%02x!\n", val2);
return -ENODEV;
}
@@ -744,7 +745,7 @@ static int asb100_probe(struct i2c_client *client,
data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL);
if (!data) {
- pr_debug("asb100.o: probe failed, kzalloc failed!\n");
+ pr_debug("probe failed, kzalloc failed!\n");
err = -ENOMEM;
goto ERROR0;
}
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 23b8555215d2..2d68cf3c223b 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -5,6 +5,8 @@
* See COPYING in the top level directory of the kernel tree.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/hwmon.h>
@@ -1414,14 +1416,13 @@ static int __init atk0110_init(void)
/* Make sure it's safe to access the device through ACPI */
if (!acpi_resources_are_enforced()) {
- pr_err("atk: Resources not safely usable due to "
- "acpi_enforce_resources kernel parameter\n");
+ pr_err("Resources not safely usable due to acpi_enforce_resources kernel parameter\n");
return -EBUSY;
}
ret = acpi_bus_register_driver(&atk_driver);
if (ret)
- pr_info("atk: acpi_bus_register_driver failed: %d\n", ret);
+ pr_info("acpi_bus_register_driver failed: %d\n", ret);
return ret;
}
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 42de98d73ff5..194ca0aa8b0c 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -20,6 +20,8 @@
* 02110-1301 USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -445,8 +447,8 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
* without thermal sensors will be filtered out.
*/
if (!cpu_has(c, X86_FEATURE_DTS)) {
- printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
- " has no thermal sensor.\n", c->x86_model);
+ pr_info("CPU (model=0x%x) has no thermal sensor\n",
+ c->x86_model);
return 0;
}
@@ -466,7 +468,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
pdev = platform_device_alloc(DRVNAME, cpu);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
@@ -478,8 +480,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_free;
}
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 980c17d5eeae..d9c592713919 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -25,6 +25,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -75,12 +77,14 @@ enum chips { dme1737, sch5027, sch311x, sch5127 };
* in4 +12V
* in5 VTR (+3.3V stby)
* in6 Vbat
+ * in7 Vtrip (sch5127 only)
*
* --------------------------------------------------------------------- */
-/* Voltages (in) numbered 0-6 (ix) */
-#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) \
- : 0x94 + (ix))
+/* Voltages (in) numbered 0-7 (ix) */
+#define DME1737_REG_IN(ix) ((ix) < 5 ? 0x20 + (ix) : \
+ (ix) < 7 ? 0x94 + (ix) : \
+ 0x1f)
#define DME1737_REG_IN_MIN(ix) ((ix) < 5 ? 0x44 + (ix) * 2 \
: 0x91 + (ix) * 2)
#define DME1737_REG_IN_MAX(ix) ((ix) < 5 ? 0x45 + (ix) * 2 \
@@ -99,10 +103,11 @@ enum chips { dme1737, sch5027, sch311x, sch5127 };
* IN_TEMP_LSB(1) = [temp3, temp1]
* IN_TEMP_LSB(2) = [in4, temp2]
* IN_TEMP_LSB(3) = [in3, in0]
- * IN_TEMP_LSB(4) = [in2, in1] */
+ * IN_TEMP_LSB(4) = [in2, in1]
+ * IN_TEMP_LSB(5) = [res, in7] */
#define DME1737_REG_IN_TEMP_LSB(ix) (0x84 + (ix))
-static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0};
-static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4};
+static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5};
+static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4};
static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
@@ -143,7 +148,7 @@ static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
#define DME1737_REG_ALARM1 0x41
#define DME1737_REG_ALARM2 0x42
#define DME1737_REG_ALARM3 0x83
-static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17};
+static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18};
static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
@@ -188,6 +193,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
#define HAS_PWM_MIN (1 << 4) /* bit 4 */
#define HAS_FAN(ix) (1 << ((ix) + 5)) /* bits 5-10 */
#define HAS_PWM(ix) (1 << ((ix) + 11)) /* bits 11-16 */
+#define HAS_IN7 (1 << 17) /* bit 17 */
/* ---------------------------------------------------------------------
* Data structures and manipulation thereof
@@ -211,9 +217,9 @@ struct dme1737_data {
u32 has_features;
/* Register values */
- u16 in[7];
- u8 in_min[7];
- u8 in_max[7];
+ u16 in[8];
+ u8 in_min[8];
+ u8 in_max[8];
s16 temp[3];
s8 temp_min[3];
s8 temp_max[3];
@@ -245,7 +251,7 @@ static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
3300};
static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300,
- 3300};
+ 3300, 1500};
#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \
(type) == sch5027 ? IN_NOMINAL_SCH5027 : \
(type) == sch5127 ? IN_NOMINAL_SCH5127 : \
@@ -578,7 +584,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
{
struct dme1737_data *data = dev_get_drvdata(dev);
int ix;
- u8 lsb[5];
+ u8 lsb[6];
mutex_lock(&data->update_lock);
@@ -601,6 +607,9 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
/* Voltage inputs are stored as 16 bit values even
* though they have only 12 bits resolution. This is
* to make it consistent with the temp inputs. */
+ if (ix == 7 && !(data->has_features & HAS_IN7)) {
+ continue;
+ }
data->in[ix] = dme1737_read(data,
DME1737_REG_IN(ix)) << 8;
data->in_min[ix] = dme1737_read(data,
@@ -633,10 +642,16 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
* which the registers are read (MSB first, then LSB) is
* important! */
for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
+ if (ix == 5 && !(data->has_features & HAS_IN7)) {
+ continue;
+ }
lsb[ix] = dme1737_read(data,
DME1737_REG_IN_TEMP_LSB(ix));
}
for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+ if (ix == 7 && !(data->has_features & HAS_IN7)) {
+ continue;
+ }
data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
}
@@ -760,7 +775,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
/* ---------------------------------------------------------------------
* Voltage sysfs attributes
- * ix = [0-5]
+ * ix = [0-7]
* --------------------------------------------------------------------- */
#define SYS_IN_INPUT 0
@@ -1437,7 +1452,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute *attr,
* Sysfs device attribute defines and structs
* --------------------------------------------------------------------- */
-/* Voltages 0-6 */
+/* Voltages 0-7 */
#define SENSOR_DEVICE_ATTR_IN(ix) \
static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
@@ -1456,6 +1471,7 @@ SENSOR_DEVICE_ATTR_IN(3);
SENSOR_DEVICE_ATTR_IN(4);
SENSOR_DEVICE_ATTR_IN(5);
SENSOR_DEVICE_ATTR_IN(6);
+SENSOR_DEVICE_ATTR_IN(7);
/* Temperatures 1-3 */
@@ -1574,7 +1590,7 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); /* for ISA devices */
* created unconditionally. The attributes that need modification of their
* permissions are created read-only and write permissions are added or removed
* on the fly when required */
-static struct attribute *dme1737_attr[] ={
+static struct attribute *dme1737_attr[] = {
/* Voltages */
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
@@ -1679,7 +1695,7 @@ static const struct attribute_group dme1737_zone3_group = {
};
-/* The following struct holds temp zone hysteresis related attributes, which
+/* The following struct holds temp zone hysteresis related attributes, which
* are not available in all chips. The following chips support them:
* DME1737, SCH311x */
static struct attribute *dme1737_zone_hyst_attr[] = {
@@ -1693,6 +1709,21 @@ static const struct attribute_group dme1737_zone_hyst_group = {
.attrs = dme1737_zone_hyst_attr,
};
+/* The following struct holds voltage in7 related attributes, which
+ * are not available in all chips. The following chips support them:
+ * SCH5127 */
+static struct attribute *dme1737_in7_attr[] = {
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_in7_group = {
+ .attrs = dme1737_in7_attr,
+};
+
/* The following structs hold the PWM attributes, some of which are optional.
* Their creation depends on the chip configuration which is determined during
* module load. */
@@ -1984,6 +2015,9 @@ static void dme1737_remove_files(struct device *dev)
if (data->has_features & HAS_ZONE_HYST) {
sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group);
}
+ if (data->has_features & HAS_IN7) {
+ sysfs_remove_group(&dev->kobj, &dme1737_in7_group);
+ }
sysfs_remove_group(&dev->kobj, &dme1737_group);
if (!data->client) {
@@ -1997,43 +2031,58 @@ static int dme1737_create_files(struct device *dev)
int err, ix;
/* Create a name attribute for ISA devices */
- if (!data->client &&
- (err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr))) {
- goto exit;
+ if (!data->client) {
+ err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr);
+ if (err) {
+ goto exit;
+ }
}
/* Create standard sysfs attributes */
- if ((err = sysfs_create_group(&dev->kobj, &dme1737_group))) {
+ err = sysfs_create_group(&dev->kobj, &dme1737_group);
+ if (err) {
goto exit_remove;
}
/* Create chip-dependent sysfs attributes */
- if ((data->has_features & HAS_TEMP_OFFSET) &&
- (err = sysfs_create_group(&dev->kobj,
- &dme1737_temp_offset_group))) {
- goto exit_remove;
+ if (data->has_features & HAS_TEMP_OFFSET) {
+ err = sysfs_create_group(&dev->kobj,
+ &dme1737_temp_offset_group);
+ if (err) {
+ goto exit_remove;
+ }
}
- if ((data->has_features & HAS_VID) &&
- (err = sysfs_create_group(&dev->kobj,
- &dme1737_vid_group))) {
- goto exit_remove;
+ if (data->has_features & HAS_VID) {
+ err = sysfs_create_group(&dev->kobj, &dme1737_vid_group);
+ if (err) {
+ goto exit_remove;
+ }
}
- if ((data->has_features & HAS_ZONE3) &&
- (err = sysfs_create_group(&dev->kobj,
- &dme1737_zone3_group))) {
- goto exit_remove;
+ if (data->has_features & HAS_ZONE3) {
+ err = sysfs_create_group(&dev->kobj, &dme1737_zone3_group);
+ if (err) {
+ goto exit_remove;
+ }
}
- if ((data->has_features & HAS_ZONE_HYST) &&
- (err = sysfs_create_group(&dev->kobj,
- &dme1737_zone_hyst_group))) {
- goto exit_remove;
+ if (data->has_features & HAS_ZONE_HYST) {
+ err = sysfs_create_group(&dev->kobj, &dme1737_zone_hyst_group);
+ if (err) {
+ goto exit_remove;
+ }
+ }
+ if (data->has_features & HAS_IN7) {
+ err = sysfs_create_group(&dev->kobj, &dme1737_in7_group);
+ if (err) {
+ goto exit_remove;
+ }
}
/* Create fan sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
if (data->has_features & HAS_FAN(ix)) {
- if ((err = sysfs_create_group(&dev->kobj,
- &dme1737_fan_group[ix]))) {
+ err = sysfs_create_group(&dev->kobj,
+ &dme1737_fan_group[ix]);
+ if (err) {
goto exit_remove;
}
}
@@ -2042,14 +2091,17 @@ static int dme1737_create_files(struct device *dev)
/* Create PWM sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
if (data->has_features & HAS_PWM(ix)) {
- if ((err = sysfs_create_group(&dev->kobj,
- &dme1737_pwm_group[ix]))) {
+ err = sysfs_create_group(&dev->kobj,
+ &dme1737_pwm_group[ix]);
+ if (err) {
goto exit_remove;
}
- if ((data->has_features & HAS_PWM_MIN) && ix < 3 &&
- (err = sysfs_create_file(&dev->kobj,
- dme1737_auto_pwm_min_attr[ix]))) {
- goto exit_remove;
+ if ((data->has_features & HAS_PWM_MIN) && (ix < 3)) {
+ err = sysfs_create_file(&dev->kobj,
+ dme1737_auto_pwm_min_attr[ix]);
+ if (err) {
+ goto exit_remove;
+ }
}
}
}
@@ -2186,7 +2238,7 @@ static int dme1737_init_device(struct device *dev)
data->has_features |= HAS_ZONE3;
break;
case sch5127:
- data->has_features |= HAS_FAN(2) | HAS_PWM(2);
+ data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7;
break;
default:
break;
@@ -2279,8 +2331,9 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
dme1737_sio_outb(sio_cip, 0x07, 0x0a);
/* Get the base address of the runtime registers */
- if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
- dme1737_sio_inb(sio_cip, 0x61))) {
+ addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+ dme1737_sio_inb(sio_cip, 0x61);
+ if (!addr) {
err = -ENODEV;
goto exit;
}
@@ -2361,13 +2414,15 @@ static int dme1737_i2c_probe(struct i2c_client *client,
mutex_init(&data->update_lock);
/* Initialize the DME1737 chip */
- if ((err = dme1737_init_device(dev))) {
+ err = dme1737_init_device(dev);
+ if (err) {
dev_err(dev, "Failed to initialize device.\n");
goto exit_kfree;
}
/* Create sysfs files */
- if ((err = dme1737_create_files(dev))) {
+ err = dme1737_create_files(dev);
+ if (err) {
dev_err(dev, "Failed to create sysfs files.\n");
goto exit_kfree;
}
@@ -2444,9 +2499,10 @@ static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr)
dme1737_sio_outb(sio_cip, 0x07, 0x0a);
/* Get the base address of the runtime registers */
- if (!(base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
- dme1737_sio_inb(sio_cip, 0x61))) {
- printk(KERN_ERR "dme1737: Base address not set.\n");
+ base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+ dme1737_sio_inb(sio_cip, 0x61);
+ if (!base_addr) {
+ pr_err("Base address not set\n");
err = -ENODEV;
goto exit;
}
@@ -2474,21 +2530,22 @@ static int __init dme1737_isa_device_add(unsigned short addr)
if (err)
goto exit;
- if (!(pdev = platform_device_alloc("dme1737", addr))) {
- printk(KERN_ERR "dme1737: Failed to allocate device.\n");
+ pdev = platform_device_alloc("dme1737", addr);
+ if (!pdev) {
+ pr_err("Failed to allocate device\n");
err = -ENOMEM;
goto exit;
}
- if ((err = platform_device_add_resources(pdev, &res, 1))) {
- printk(KERN_ERR "dme1737: Failed to add device resource "
- "(err = %d).\n", err);
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ pr_err("Failed to add device resource (err = %d)\n", err);
goto exit_device_put;
}
- if ((err = platform_device_add(pdev))) {
- printk(KERN_ERR "dme1737: Failed to add device (err = %d).\n",
- err);
+ err = platform_device_add(pdev);
+ if (err) {
+ pr_err("Failed to add device (err = %d)\n", err);
goto exit_device_put;
}
@@ -2514,11 +2571,12 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
(unsigned short)res->start,
(unsigned short)res->start + DME1737_EXTENT - 1);
- err = -EBUSY;
- goto exit;
- }
+ err = -EBUSY;
+ goto exit;
+ }
- if (!(data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL))) {
+ data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL);
+ if (!data) {
err = -ENOMEM;
goto exit_release_region;
}
@@ -2565,13 +2623,15 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr);
/* Initialize the chip */
- if ((err = dme1737_init_device(dev))) {
+ err = dme1737_init_device(dev);
+ if (err) {
dev_err(dev, "Failed to initialize device.\n");
goto exit_kfree;
}
/* Create sysfs files */
- if ((err = dme1737_create_files(dev))) {
+ err = dme1737_create_files(dev);
+ if (err) {
dev_err(dev, "Failed to create sysfs files.\n");
goto exit_kfree;
}
@@ -2628,7 +2688,8 @@ static int __init dme1737_init(void)
int err;
unsigned short addr;
- if ((err = i2c_add_driver(&dme1737_i2c_driver))) {
+ err = i2c_add_driver(&dme1737_i2c_driver);
+ if (err) {
goto exit;
}
@@ -2641,12 +2702,14 @@ static int __init dme1737_init(void)
return 0;
}
- if ((err = platform_driver_register(&dme1737_isa_driver))) {
+ err = platform_driver_register(&dme1737_isa_driver);
+ if (err) {
goto exit_del_i2c_driver;
}
/* Sets global pdev as a side effect */
- if ((err = dme1737_isa_device_add(addr))) {
+ err = dme1737_isa_device_add(addr);
+ if (err) {
goto exit_del_isa_driver;
}
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
new file mode 100644
index 000000000000..257957c69d92
--- /dev/null
+++ b/drivers/hwmon/ds620.c
@@ -0,0 +1,337 @@
+/*
+ * ds620.c - Support for temperature sensor and thermostat DS620
+ *
+ * Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
+ *
+ * based on ds1621.c by Christian W. Zuckschwerdt <zany@triq.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/i2c/ds620.h>
+
+/*
+ * Many DS620 constants specified below
+ * 15 14 13 12 11 10 09 08
+ * |Done|NVB |THF |TLF |R1 |R0 |AUTOC|1SHOT|
+ *
+ * 07 06 05 04 03 02 01 00
+ * |PO2 |PO1 |A2 |A1 |A0 | | | |
+ */
+#define DS620_REG_CONFIG_DONE 0x8000
+#define DS620_REG_CONFIG_NVB 0x4000
+#define DS620_REG_CONFIG_THF 0x2000
+#define DS620_REG_CONFIG_TLF 0x1000
+#define DS620_REG_CONFIG_R1 0x0800
+#define DS620_REG_CONFIG_R0 0x0400
+#define DS620_REG_CONFIG_AUTOC 0x0200
+#define DS620_REG_CONFIG_1SHOT 0x0100
+#define DS620_REG_CONFIG_PO2 0x0080
+#define DS620_REG_CONFIG_PO1 0x0040
+#define DS620_REG_CONFIG_A2 0x0020
+#define DS620_REG_CONFIG_A1 0x0010
+#define DS620_REG_CONFIG_A0 0x0008
+
+/* The DS620 registers */
+static const u8 DS620_REG_TEMP[3] = {
+ 0xAA, /* input, word, RO */
+ 0xA2, /* min, word, RW */
+ 0xA0, /* max, word, RW */
+};
+
+#define DS620_REG_CONF 0xAC /* word, RW */
+#define DS620_COM_START 0x51 /* no data */
+#define DS620_COM_STOP 0x22 /* no data */
+
+/* Each client has this additional data */
+struct ds620_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ u16 temp[3]; /* Register values, word */
+};
+
+/*
+ * Temperature registers are word-sized.
+ * DS620 uses a high-byte first convention, which is exactly opposite to
+ * the SMBus standard.
+ */
+static int ds620_read_temp(struct i2c_client *client, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_word_data(client, reg);
+ if (ret < 0)
+ return ret;
+ return swab16(ret);
+}
+
+static int ds620_write_temp(struct i2c_client *client, u8 reg, u16 value)
+{
+ return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void ds620_init_client(struct i2c_client *client)
+{
+ struct ds620_platform_data *ds620_info = client->dev.platform_data;
+ u16 conf, new_conf;
+
+ new_conf = conf =
+ swab16(i2c_smbus_read_word_data(client, DS620_REG_CONF));
+
+ /* switch to continuous conversion mode */
+ new_conf &= ~DS620_REG_CONFIG_1SHOT;
+ /* already high at power-on, but don't trust the BIOS! */
+ new_conf |= DS620_REG_CONFIG_PO2;
+ /* thermostat mode according to platform data */
+ if (ds620_info && ds620_info->pomode == 1)
+ new_conf &= ~DS620_REG_CONFIG_PO1; /* PO_LOW */
+ else if (ds620_info && ds620_info->pomode == 2)
+ new_conf |= DS620_REG_CONFIG_PO1; /* PO_HIGH */
+ else
+ new_conf &= ~DS620_REG_CONFIG_PO2; /* always low */
+ /* with highest precision */
+ new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0;
+
+ if (conf != new_conf)
+ i2c_smbus_write_word_data(client, DS620_REG_CONF,
+ swab16(new_conf));
+
+ /* start conversion */
+ i2c_smbus_write_byte(client, DS620_COM_START);
+}
+
+static struct ds620_data *ds620_update_client(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds620_data *data = i2c_get_clientdata(client);
+ struct ds620_data *ret = data;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ int i;
+ int res;
+
+ dev_dbg(&client->dev, "Starting ds620 update\n");
+
+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+ res = ds620_read_temp(client,
+ DS620_REG_TEMP[i]);
+ if (res < 0) {
+ ret = ERR_PTR(res);
+ goto abort;
+ }
+
+ data->temp[i] = res;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+abort:
+ mutex_unlock(&data->update_lock);
+
+ return ret;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ds620_data *data = ds620_update_client(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return sprintf(buf, "%d\n", ((data->temp[attr->index] / 8) * 625) / 10);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ int res;
+ long val;
+
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds620_data *data = i2c_get_clientdata(client);
+
+ res = strict_strtol(buf, 10, &val);
+
+ if (res)
+ return res;
+
+ val = (val * 10 / 625) * 8;
+
+ mutex_lock(&data->update_lock);
+ data->temp[attr->index] = val;
+ ds620_write_temp(client, DS620_REG_TEMP[attr->index],
+ data->temp[attr->index]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct ds620_data *data = ds620_update_client(dev);
+ struct i2c_client *client = to_i2c_client(dev);
+ u16 conf, new_conf;
+ int res;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ /* reset alarms if necessary */
+ res = i2c_smbus_read_word_data(client, DS620_REG_CONF);
+ if (res < 0)
+ return res;
+
+ conf = swab16(res);
+ new_conf = conf;
+ new_conf &= ~attr->index;
+ if (conf != new_conf) {
+ res = i2c_smbus_write_word_data(client, DS620_REG_CONF,
+ swab16(new_conf));
+ if (res < 0)
+ return res;
+ }
+
+ return sprintf(buf, "%d\n", !!(conf & attr->index));
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
+ DS620_REG_CONFIG_TLF);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+ DS620_REG_CONFIG_THF);
+
+static struct attribute *ds620_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group ds620_group = {
+ .attrs = ds620_attributes,
+};
+
+static int ds620_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds620_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct ds620_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /* Initialize the DS620 chip */
+ ds620_init_client(client);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &ds620_group);
+ if (err)
+ goto exit_free;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
+
+ dev_info(&client->dev, "temperature sensor found\n");
+
+ return 0;
+
+exit_remove_files:
+ sysfs_remove_group(&client->dev.kobj, &ds620_group);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int ds620_remove(struct i2c_client *client)
+{
+ struct ds620_data *data = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &ds620_group);
+
+ kfree(data);
+
+ return 0;
+}
+
+static const struct i2c_device_id ds620_id[] = {
+ {"ds620", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, ds620_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ds620_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "ds620",
+ },
+ .probe = ds620_probe,
+ .remove = ds620_remove,
+ .id_table = ds620_id,
+};
+
+static int __init ds620_init(void)
+{
+ return i2c_add_driver(&ds620_driver);
+}
+
+static void __exit ds620_exit(void)
+{
+ i2c_del_driver(&ds620_driver);
+}
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("DS620 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds620_init);
+module_exit(ds620_exit);
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index 8dee3f38fdfb..5dea9faa1656 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -269,23 +269,30 @@ static int emc1403_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
int id;
- /* Check if thermal chip is SMSC and EMC1403 */
+ /* Check if thermal chip is SMSC and EMC1403 or EMC1423 */
id = i2c_smbus_read_byte_data(client, THERMAL_SMSC_ID_REG);
if (id != 0x5d)
return -ENODEV;
+ id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
+ switch (id) {
+ case 0x21:
+ strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
+ break;
+ case 0x23:
+ strlcpy(info->type, "emc1423", I2C_NAME_SIZE);
+ break;
/* Note: 0x25 is the 1404 which is very similar and this
driver could be extended */
- id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
- if (id != 0x21)
+ default:
return -ENODEV;
+ }
id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
if (id != 0x01)
return -ENODEV;
- strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
return 0;
}
@@ -342,6 +349,7 @@ static const unsigned short emc1403_address_list[] = {
static const struct i2c_device_id emc1403_idtable[] = {
{ "emc1403", 0 },
+ { "emc1423", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 525a00bd70b1..92f949767ece 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -28,6 +28,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1309,7 +1311,7 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Out of memory\n");
+ pr_err("Out of memory\n");
goto exit;
}
@@ -1451,7 +1453,7 @@ static int __init f71805f_device_add(unsigned short address,
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
@@ -1462,22 +1464,20 @@ static int __init f71805f_device_add(unsigned short address,
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct f71805f_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
@@ -1516,30 +1516,27 @@ static int __init f71805f_find(int sioaddr, unsigned short *address,
sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1);
break;
default:
- printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
- "skipping\n");
+ pr_info("Unsupported Fintek device, skipping\n");
goto exit;
}
superio_select(sioaddr, F71805F_LD_HWM);
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
- printk(KERN_WARNING DRVNAME ": Device not activated, "
- "skipping\n");
+ pr_warn("Device not activated, skipping\n");
goto exit;
}
*address = superio_inw(sioaddr, SIO_REG_ADDR);
if (*address == 0) {
- printk(KERN_WARNING DRVNAME ": Base address not set, "
- "skipping\n");
+ pr_warn("Base address not set, skipping\n");
goto exit;
}
*address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
err = 0;
- printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %u\n",
- names[sio_data->kind], *address,
- superio_inb(sioaddr, SIO_REG_DEVREV));
+ pr_info("Found %s chip at %#x, revision %u\n",
+ names[sio_data->kind], *address,
+ superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 75afb3b0e076..3f49dd376f02 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -18,6 +18,8 @@
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -865,8 +867,7 @@ static inline int superio_enter(int base)
{
/* Don't step on other drivers' I/O space by accident */
if (!request_muxed_region(base, 2, DRVNAME)) {
- printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
- base);
+ pr_err("I/O address 0x%04x already in use\n", base);
return -EBUSY;
}
@@ -2192,7 +2193,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
- pr_debug(DRVNAME ": Not a Fintek device\n");
+ pr_debug("Not a Fintek device\n");
err = -ENODEV;
goto exit;
}
@@ -2215,8 +2216,8 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
sio_data->type = f8000;
break;
default:
- printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
- (unsigned int)devid);
+ pr_info("Unsupported Fintek device: %04x\n",
+ (unsigned int)devid);
err = -ENODEV;
goto exit;
}
@@ -2227,21 +2228,21 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
superio_select(sioaddr, SIO_F71882FG_LD_HWM);
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
- printk(KERN_WARNING DRVNAME ": Device not activated\n");
+ pr_warn("Device not activated\n");
err = -ENODEV;
goto exit;
}
*address = superio_inw(sioaddr, SIO_REG_ADDR);
if (*address == 0) {
- printk(KERN_WARNING DRVNAME ": Base address not set\n");
+ pr_warn("Base address not set\n");
err = -ENODEV;
goto exit;
}
*address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
err = 0;
- printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n",
+ pr_info("Found %s chip at %#x, revision %d\n",
f71882fg_names[sio_data->type], (unsigned int)*address,
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
@@ -2270,20 +2271,20 @@ static int __init f71882fg_device_add(unsigned short address,
err = platform_device_add_resources(f71882fg_pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed\n");
+ pr_err("Device resource addition failed\n");
goto exit_device_put;
}
err = platform_device_add_data(f71882fg_pdev, sio_data,
sizeof(struct f71882fg_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(f71882fg_pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed\n");
+ pr_err("Device addition failed\n");
goto exit_device_put;
}
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index d4d4ca65d371..aa6d8b686f82 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -49,7 +49,6 @@
#include <linux/kref.h>
/* Addresses to scan */
-static DEFINE_MUTEX(watchdog_mutex);
static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
/* Insmod parameters */
@@ -850,7 +849,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
- static struct watchdog_info ident = {
+ struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
WDIOF_CARDRESET,
.identity = "FSC watchdog"
@@ -858,7 +857,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
int i, ret = 0;
struct fschmd_data *data = filp->private_data;
- mutex_lock(&watchdog_mutex);
switch (cmd) {
case WDIOC_GETSUPPORT:
ident.firmware_version = data->revision;
@@ -915,7 +913,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
default:
ret = -ENOTTY;
}
- mutex_unlock(&watchdog_mutex);
return ret;
}
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index a56a78412fcb..3d21fa2b97cd 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dmi.h>
@@ -147,7 +149,7 @@ int lis3lv02d_acpi_write(struct lis3lv02d *lis3, int reg, u8 val)
static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi)
{
lis3_dev.ac = *((union axis_conversion *)dmi->driver_data);
- printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident);
+ pr_info("hardware type %s found\n", dmi->ident);
return 1;
}
@@ -303,11 +305,10 @@ static int lis3lv02d_add(struct acpi_device *device)
/* If possible use a "standard" axes order */
if (lis3_dev.ac.x && lis3_dev.ac.y && lis3_dev.ac.z) {
- printk(KERN_INFO DRIVER_NAME ": Using custom axes %d,%d,%d\n",
- lis3_dev.ac.x, lis3_dev.ac.y, lis3_dev.ac.z);
+ pr_info("Using custom axes %d,%d,%d\n",
+ lis3_dev.ac.x, lis3_dev.ac.y, lis3_dev.ac.z);
} else if (dmi_check_system(lis3lv02d_dmi_ids) == 0) {
- printk(KERN_INFO DRIVER_NAME ": laptop model unknown, "
- "using default axes configuration\n");
+ pr_info("laptop model unknown, using default axes configuration\n");
lis3_dev.ac = lis3lv02d_axis_normal;
}
@@ -385,7 +386,7 @@ static int __init lis3lv02d_init_module(void)
if (ret < 0)
return ret;
- printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
+ pr_info("driver loaded\n");
return 0;
}
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 2b2ca1694f95..2582bfef6ccb 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -22,6 +22,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/hwmon-vid.h>
@@ -146,8 +148,8 @@ int vid_from_reg(int val, u8 vrm)
return(val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000);
default: /* report 0 for unknown */
if (vrm)
- printk(KERN_WARNING "hwmon-vid: Requested unsupported "
- "VRM version (%u)\n", (unsigned int)vrm);
+ pr_warn("Requested unsupported VRM version (%u)\n",
+ (unsigned int)vrm);
return 0;
}
}
@@ -246,8 +248,7 @@ u8 vid_which_vrm(void)
}
vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor);
if (vrm_ret == 0)
- printk(KERN_INFO "hwmon-vid: Unknown VRM version of your "
- "x86 CPU\n");
+ pr_info("Unknown VRM version of your x86 CPU\n");
return vrm_ret;
}
@@ -255,7 +256,7 @@ u8 vid_which_vrm(void)
#else
u8 vid_which_vrm(void)
{
- printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n");
+ pr_info("Unknown VRM version of your CPU\n");
return 0;
}
#endif
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 29ea6753f3bb..a61e7815a2a9 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -10,6 +10,8 @@
the Free Software Foundation; version 2 of the License.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
@@ -119,7 +121,7 @@ static int __init hwmon_init(void)
hwmon_class = class_create(THIS_MODULE, "hwmon");
if (IS_ERR(hwmon_class)) {
- printk(KERN_ERR "hwmon.c: couldn't create sysfs class\n");
+ pr_err("couldn't create sysfs class\n");
return PTR_ERR(hwmon_class);
}
return 0;
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index eaee546af19a..bc6e2ab3a361 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/ipmi.h>
#include <linux/module.h>
#include <linux/hwmon.h>
@@ -1090,7 +1092,7 @@ static int __init aem_init(void)
res = driver_register(&aem_driver.driver);
if (res) {
- printk(KERN_ERR "Can't register aem driver\n");
+ pr_err("Can't register aem driver\n");
return res;
}
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a428a9264195..316b64823f7b 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -38,6 +38,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1570,26 +1572,25 @@ static int __init it87_find(unsigned short *address,
case 0xffff: /* No device at all */
goto exit;
default:
- pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
- chip_type);
+ pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
goto exit;
}
superio_select(PME);
if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
- pr_info("it87: Device not activated, skipping\n");
+ pr_info("Device not activated, skipping\n");
goto exit;
}
*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
if (*address == 0) {
- pr_info("it87: Base address not set, skipping\n");
+ pr_info("Base address not set, skipping\n");
goto exit;
}
err = 0;
sio_data->revision = superio_inb(DEVREV) & 0x0f;
- pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+ pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
chip_type, *address, sio_data->revision);
/* in8 (Vbat) is always internal */
@@ -1615,7 +1616,7 @@ static int __init it87_find(unsigned short *address,
} else {
/* We need at least 4 VID pins */
if (reg & 0x0f) {
- pr_info("it87: VID is disabled (pins used for GPIO)\n");
+ pr_info("VID is disabled (pins used for GPIO)\n");
sio_data->skip_vid = 1;
}
}
@@ -1651,7 +1652,7 @@ static int __init it87_find(unsigned short *address,
if (sio_data->type == it8720 && !(reg & (1 << 1))) {
reg |= (1 << 1);
superio_outb(IT87_SIO_PINX2_REG, reg);
- pr_notice("it87: Routing internal VCCH to in7\n");
+ pr_notice("Routing internal VCCH to in7\n");
}
if (reg & (1 << 0))
sio_data->internal |= (1 << 0);
@@ -1661,7 +1662,7 @@ static int __init it87_find(unsigned short *address,
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
if (sio_data->beep_pin)
- pr_info("it87: Beeping is supported\n");
+ pr_info("Beeping is supported\n");
/* Disable specific features based on DMI strings */
board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1675,8 +1676,7 @@ static int __init it87_find(unsigned short *address,
the PWM2 duty cycle, so we disable it.
I use the board name string as the trigger in case
the same board is ever used in other systems. */
- pr_info("it87: Disabling pwm2 due to "
- "hardware constraints\n");
+ pr_info("Disabling pwm2 due to hardware constraints\n");
sio_data->skip_pwm = (1 << 1);
}
}
@@ -2189,28 +2189,26 @@ static int __init it87_device_add(unsigned short address,
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct it87_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 0cee73a6124e..1b674b7d4584 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -20,6 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dmi.h>
@@ -860,8 +862,7 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
(p->irq_flags2 & IRQF_TRIGGER_MASK),
DRIVER_NAME, &lis3_dev);
if (err < 0)
- printk(KERN_ERR DRIVER_NAME
- "No second IRQ. Limited functionality\n");
+ pr_err("No second IRQ. Limited functionality\n");
}
}
@@ -879,7 +880,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
switch (dev->whoami) {
case WAI_12B:
- printk(KERN_INFO DRIVER_NAME ": 12 bits sensor found\n");
+ pr_info("12 bits sensor found\n");
dev->read_data = lis3lv02d_read_12;
dev->mdps_max_val = 2048;
dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
@@ -890,7 +891,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
dev->regs_size = ARRAY_SIZE(lis3_wai12_regs);
break;
case WAI_8B:
- printk(KERN_INFO DRIVER_NAME ": 8 bits sensor found\n");
+ pr_info("8 bits sensor found\n");
dev->read_data = lis3lv02d_read_8;
dev->mdps_max_val = 128;
dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
@@ -901,7 +902,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
dev->regs_size = ARRAY_SIZE(lis3_wai8_regs);
break;
case WAI_3DC:
- printk(KERN_INFO DRIVER_NAME ": 8 bits 3DC sensor found\n");
+ pr_info("8 bits 3DC sensor found\n");
dev->read_data = lis3lv02d_read_8;
dev->mdps_max_val = 128;
dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
@@ -910,8 +911,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
dev->scale = LIS3_SENSITIVITY_8B;
break;
default:
- printk(KERN_ERR DRIVER_NAME
- ": unknown sensor type 0x%X\n", dev->whoami);
+ pr_err("unknown sensor type 0x%X\n", dev->whoami);
return -EINVAL;
}
@@ -935,7 +935,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
}
if (lis3lv02d_joystick_enable())
- printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+ pr_err("joystick initialization failed\n");
/* passing in platform specific data is purely optional and only
* used by the SPI transport layer at the moment */
@@ -957,8 +957,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
/* bail if we did not get an IRQ from the bus layer */
if (!dev->irq) {
- printk(KERN_ERR DRIVER_NAME
- ": No IRQ. Disabling /dev/freefall\n");
+ pr_err("No IRQ. Disabling /dev/freefall\n");
goto out;
}
@@ -985,12 +984,12 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
DRIVER_NAME, &lis3_dev);
if (err < 0) {
- printk(KERN_ERR DRIVER_NAME "Cannot get IRQ\n");
+ pr_err("Cannot get IRQ\n");
goto out;
}
if (misc_register(&lis3lv02d_misc_device))
- printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+ pr_err("misc_register failed\n");
out:
return 0;
}
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index fd108cfc05c7..3b84fb503053 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -24,6 +24,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -67,8 +69,7 @@ static ssize_t lm70_sense_temp(struct device *dev,
*/
status = spi_write_then_read(spi, NULL, 0, &rxbuf[0], 2);
if (status < 0) {
- printk(KERN_WARNING
- "spi_write_then_read failed with status %d\n", status);
+ pr_warn("spi_write_then_read failed with status %d\n", status);
goto out;
}
raw = (rxbuf[0] << 8) + rxbuf[1];
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 72ff2c4e757d..4cb24eafe318 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -19,6 +19,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -858,7 +860,7 @@ static int __init lm78_isa_found(unsigned short address)
* individually for the probing phase. */
for (port = address; port < address + LM78_EXTENT; port++) {
if (!request_region(port, 1, "lm78")) {
- pr_debug("lm78: Failed to request port 0x%x\n", port);
+ pr_debug("Failed to request port 0x%x\n", port);
goto release;
}
}
@@ -920,7 +922,7 @@ static int __init lm78_isa_found(unsigned short address)
found = 1;
if (found)
- pr_info("lm78: Found an %s chip at %#x\n",
+ pr_info("Found an %s chip at %#x\n",
val & 0x80 ? "LM79" : "LM78", (int)address);
release:
@@ -942,21 +944,19 @@ static int __init lm78_isa_device_add(unsigned short address)
pdev = platform_device_alloc("lm78", address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR "lm78: Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR "lm78: Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR "lm78: Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index c9ed14eba5a6..3b43df418613 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -135,6 +135,11 @@
#define LM93_MFR_ID 0x73
#define LM93_MFR_ID_PROTOTYPE 0x72
+/* LM94 REGISTER VALUES */
+#define LM94_MFR_ID_2 0x7a
+#define LM94_MFR_ID 0x79
+#define LM94_MFR_ID_PROTOTYPE 0x78
+
/* SMBus capabilities */
#define LM93_SMBUS_FUNC_FULL (I2C_FUNC_SMBUS_BYTE_DATA | \
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA)
@@ -2504,6 +2509,7 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
int mfr, ver;
+ const char *name;
if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
return -ENODEV;
@@ -2517,13 +2523,23 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info)
}
ver = lm93_read_byte(client, LM93_REG_VER);
- if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) {
+ switch (ver) {
+ case LM93_MFR_ID:
+ case LM93_MFR_ID_PROTOTYPE:
+ name = "lm93";
+ break;
+ case LM94_MFR_ID_2:
+ case LM94_MFR_ID:
+ case LM94_MFR_ID_PROTOTYPE:
+ name = "lm94";
+ break;
+ default:
dev_dbg(&adapter->dev,
"detect failed, bad version id 0x%02x!\n", ver);
return -ENODEV;
}
- strlcpy(info->type, "lm93", I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
client->name, i2c_adapter_id(client->adapter),
client->addr);
@@ -2602,6 +2618,7 @@ static int lm93_remove(struct i2c_client *client)
static const struct i2c_device_id lm93_id[] = {
{ "lm93", 0 },
+ { "lm94", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm93_id);
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 4546d82f024a..1a6dfb6df1e7 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -1,13 +1,9 @@
/*
- * lm95241.c - Part of lm_sensors, Linux kernel modules for hardware
- * monitoring
- * Copyright (C) 2008 Davide Rizzo <elpa-rizzo@gmail.com>
+ * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
*
- * Based on the max1619 driver. The LM95241 is a sensor chip made by National
- * Semiconductors.
- * It reports up to three temperatures (its own plus up to
- * two external ones). Complete datasheet can be
- * obtained from National's website at:
+ * The LM95241 is a sensor chip made by National Semiconductors.
+ * It reports up to three temperatures (its own plus up to two external ones).
+ * Complete datasheet can be obtained from National's website at:
* http://www.national.com/ds.cgi/LM/LM95241.pdf
*
* This program is free software; you can redistribute it and/or modify
@@ -36,8 +32,10 @@
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#define DEVNAME "lm95241"
+
static const unsigned short normal_i2c[] = {
- 0x19, 0x2a, 0x2b, I2C_CLIENT_END};
+ 0x19, 0x2a, 0x2b, I2C_CLIENT_END };
/* LM95241 registers */
#define LM95241_REG_R_MAN_ID 0xFE
@@ -46,7 +44,7 @@ static const unsigned short normal_i2c[] = {
#define LM95241_REG_RW_CONFIG 0x03
#define LM95241_REG_RW_REM_FILTER 0x06
#define LM95241_REG_RW_TRUTHERM 0x07
-#define LM95241_REG_W_ONE_SHOT 0x0F
+#define LM95241_REG_W_ONE_SHOT 0x0F
#define LM95241_REG_R_LOCAL_TEMPH 0x10
#define LM95241_REG_R_REMOTE1_TEMPH 0x11
#define LM95241_REG_R_REMOTE2_TEMPH 0x12
@@ -79,235 +77,246 @@ static const unsigned short normal_i2c[] = {
#define MANUFACTURER_ID 0x01
#define DEFAULT_REVISION 0xA4
-/* Conversions and various macros */
-#define TEMP_FROM_REG(val_h, val_l) (((val_h) & 0x80 ? (val_h) - 0x100 : \
- (val_h)) * 1000 + (val_l) * 1000 / 256)
-
-/* Functions declaration */
-static void lm95241_init_client(struct i2c_client *client);
-static struct lm95241_data *lm95241_update_device(struct device *dev);
+static const u8 lm95241_reg_address[] = {
+ LM95241_REG_R_LOCAL_TEMPH,
+ LM95241_REG_R_LOCAL_TEMPL,
+ LM95241_REG_R_REMOTE1_TEMPH,
+ LM95241_REG_R_REMOTE1_TEMPL,
+ LM95241_REG_R_REMOTE2_TEMPH,
+ LM95241_REG_R_REMOTE2_TEMPL
+};
/* Client data (each client gets its own) */
struct lm95241_data {
struct device *hwmon_dev;
struct mutex update_lock;
- unsigned long last_updated, interval; /* in jiffies */
- char valid; /* zero until following fields are valid */
+ unsigned long last_updated, interval; /* in jiffies */
+ char valid; /* zero until following fields are valid */
/* registers values */
- u8 local_h, local_l; /* local */
- u8 remote1_h, remote1_l; /* remote1 */
- u8 remote2_h, remote2_l; /* remote2 */
+ u8 temp[ARRAY_SIZE(lm95241_reg_address)];
u8 config, model, trutherm;
};
+/* Conversions */
+static int TempFromReg(u8 val_h, u8 val_l)
+{
+ if (val_h & 0x80)
+ return val_h - 0x100;
+ return val_h * 1000 + val_l * 1000 / 256;
+}
+
+static struct lm95241_data *lm95241_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm95241_data *data = i2c_get_clientdata(client);
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + data->interval) ||
+ !data->valid) {
+ int i;
+
+ dev_dbg(&client->dev, "Updating lm95241 data.\n");
+ for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++)
+ data->temp[i]
+ = i2c_smbus_read_byte_data(client,
+ lm95241_reg_address[i]);
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
/* Sysfs stuff */
-#define show_temp(value) \
-static ssize_t show_##value(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct lm95241_data *data = lm95241_update_device(dev); \
- snprintf(buf, PAGE_SIZE - 1, "%d\n", \
- TEMP_FROM_REG(data->value##_h, data->value##_l)); \
- return strlen(buf); \
+static ssize_t show_input(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lm95241_data *data = lm95241_update_device(dev);
+
+ return snprintf(buf, PAGE_SIZE - 1, "%d\n",
+ TempFromReg(data->temp[to_sensor_dev_attr(attr)->index],
+ data->temp[to_sensor_dev_attr(attr)->index + 1]));
}
-show_temp(local);
-show_temp(remote1);
-show_temp(remote2);
-static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
+static ssize_t show_type(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct lm95241_data *data = lm95241_update_device(dev);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm95241_data *data = i2c_get_clientdata(client);
- snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval / HZ);
- return strlen(buf);
+ return snprintf(buf, PAGE_SIZE - 1,
+ data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n");
}
-static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
+static ssize_t set_type(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct lm95241_data *data = i2c_get_clientdata(client);
unsigned long val;
+ int shift;
+ u8 mask = to_sensor_dev_attr(attr)->index;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
+ if (val != 1 && val != 2)
+ return -EINVAL;
- data->interval = val * HZ / 1000;
+ shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT;
+
+ mutex_lock(&data->update_lock);
+
+ data->trutherm &= ~(TT_MASK << shift);
+ if (val == 1) {
+ data->model |= mask;
+ data->trutherm |= (TT_ON << shift);
+ } else {
+ data->model &= ~mask;
+ data->trutherm |= (TT_OFF << shift);
+ }
+ data->valid = 0;
+
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
+ data->model);
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
+ data->trutherm);
+
+ mutex_unlock(&data->update_lock);
return count;
}
-#define show_type(flag) \
-static ssize_t show_type##flag(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm95241_data *data = i2c_get_clientdata(client); \
-\
- snprintf(buf, PAGE_SIZE - 1, \
- data->model & R##flag##MS_MASK ? "1\n" : "2\n"); \
- return strlen(buf); \
+static ssize_t show_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm95241_data *data = i2c_get_clientdata(client);
+
+ return snprintf(buf, PAGE_SIZE - 1,
+ data->config & to_sensor_dev_attr(attr)->index ?
+ "-127000\n" : "0\n");
}
-show_type(1);
-show_type(2);
-
-#define show_min(flag) \
-static ssize_t show_min##flag(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm95241_data *data = i2c_get_clientdata(client); \
-\
- snprintf(buf, PAGE_SIZE - 1, \
- data->config & R##flag##DF_MASK ? \
- "-127000\n" : "0\n"); \
- return strlen(buf); \
+
+static ssize_t set_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm95241_data *data = i2c_get_clientdata(client);
+ long val;
+
+ if (strict_strtol(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val < -128000)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+
+ if (val < 0)
+ data->config |= to_sensor_dev_attr(attr)->index;
+ else
+ data->config &= ~to_sensor_dev_attr(attr)->index;
+ data->valid = 0;
+
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
}
-show_min(1);
-show_min(2);
-
-#define show_max(flag) \
-static ssize_t show_max##flag(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm95241_data *data = i2c_get_clientdata(client); \
-\
- snprintf(buf, PAGE_SIZE - 1, \
- data->config & R##flag##DF_MASK ? \
- "127000\n" : "255000\n"); \
- return strlen(buf); \
+
+static ssize_t show_max(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm95241_data *data = i2c_get_clientdata(client);
+
+ return snprintf(buf, PAGE_SIZE - 1,
+ data->config & to_sensor_dev_attr(attr)->index ?
+ "127000\n" : "255000\n");
}
-show_max(1);
-show_max(2);
-
-#define set_type(flag) \
-static ssize_t set_type##flag(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm95241_data *data = i2c_get_clientdata(client); \
-\
- long val; \
-\
- if (strict_strtol(buf, 10, &val) < 0) \
- return -EINVAL; \
-\
- if ((val == 1) || (val == 2)) { \
-\
- mutex_lock(&data->update_lock); \
-\
- data->trutherm &= ~(TT_MASK << TT##flag##_SHIFT); \
- if (val == 1) { \
- data->model |= R##flag##MS_MASK; \
- data->trutherm |= (TT_ON << TT##flag##_SHIFT); \
- } \
- else { \
- data->model &= ~R##flag##MS_MASK; \
- data->trutherm |= (TT_OFF << TT##flag##_SHIFT); \
- } \
-\
- data->valid = 0; \
-\
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, \
- data->model); \
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, \
- data->trutherm); \
-\
- mutex_unlock(&data->update_lock); \
-\
- } \
- return count; \
+
+static ssize_t set_max(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm95241_data *data = i2c_get_clientdata(client);
+ long val;
+
+ if (strict_strtol(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val >= 256000)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+
+ if (val <= 127000)
+ data->config |= to_sensor_dev_attr(attr)->index;
+ else
+ data->config &= ~to_sensor_dev_attr(attr)->index;
+ data->valid = 0;
+
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
}
-set_type(1);
-set_type(2);
-
-#define set_min(flag) \
-static ssize_t set_min##flag(struct device *dev, \
- struct device_attribute *devattr, const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm95241_data *data = i2c_get_clientdata(client); \
-\
- long val; \
-\
- if (strict_strtol(buf, 10, &val) < 0) \
- return -EINVAL;\
-\
- mutex_lock(&data->update_lock); \
-\
- if (val < 0) \
- data->config |= R##flag##DF_MASK; \
- else \
- data->config &= ~R##flag##DF_MASK; \
-\
- data->valid = 0; \
-\
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
- data->config); \
-\
- mutex_unlock(&data->update_lock); \
-\
- return count; \
+
+static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lm95241_data *data = lm95241_update_device(dev);
+
+ return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval
+ / HZ);
}
-set_min(1);
-set_min(2);
-
-#define set_max(flag) \
-static ssize_t set_max##flag(struct device *dev, \
- struct device_attribute *devattr, const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct lm95241_data *data = i2c_get_clientdata(client); \
-\
- long val; \
-\
- if (strict_strtol(buf, 10, &val) < 0) \
- return -EINVAL; \
-\
- mutex_lock(&data->update_lock); \
-\
- if (val <= 127000) \
- data->config |= R##flag##DF_MASK; \
- else \
- data->config &= ~R##flag##DF_MASK; \
-\
- data->valid = 0; \
-\
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
- data->config); \
-\
- mutex_unlock(&data->update_lock); \
-\
- return count; \
+
+static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm95241_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ data->interval = val * HZ / 1000;
+
+ return count;
}
-set_max(1);
-set_max(2);
-
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_local, NULL);
-static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote1, NULL);
-static DEVICE_ATTR(temp3_input, S_IRUGO, show_remote2, NULL);
-static DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type1, set_type1);
-static DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type2, set_type2);
-static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1);
-static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2);
-static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1);
-static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type,
+ R1MS_MASK);
+static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type,
+ R2MS_MASK);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min,
+ R1DF_MASK);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min,
+ R2DF_MASK);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max,
+ R1DF_MASK);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max,
+ R2DF_MASK);
static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
set_interval);
static struct attribute *lm95241_attributes[] = {
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp3_input.attr,
- &dev_attr_temp2_type.attr,
- &dev_attr_temp3_type.attr,
- &dev_attr_temp2_min.attr,
- &dev_attr_temp3_min.attr,
- &dev_attr_temp2_max.attr,
- &dev_attr_temp3_max.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_type.dev_attr.attr,
+ &sensor_dev_attr_temp3_type.dev_attr.attr,
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
&dev_attr_update_interval.attr,
NULL
};
@@ -329,9 +338,9 @@ static int lm95241_detect(struct i2c_client *new_client,
if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
== MANUFACTURER_ID)
- && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
- >= DEFAULT_REVISION)) {
- name = "lm95241";
+ && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
+ >= DEFAULT_REVISION)) {
+ name = DEVNAME;
} else {
dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
address);
@@ -343,6 +352,25 @@ static int lm95241_detect(struct i2c_client *new_client,
return 0;
}
+static void lm95241_init_client(struct i2c_client *client)
+{
+ struct lm95241_data *data = i2c_get_clientdata(client);
+
+ data->interval = HZ; /* 1 sec default */
+ data->valid = 0;
+ data->config = CFG_CR0076;
+ data->model = 0;
+ data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
+
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
+ R1FE_MASK | R2FE_MASK);
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
+ data->trutherm);
+ i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
+ data->model);
+}
+
static int lm95241_probe(struct i2c_client *new_client,
const struct i2c_device_id *id)
{
@@ -382,26 +410,6 @@ exit:
return err;
}
-static void lm95241_init_client(struct i2c_client *client)
-{
- struct lm95241_data *data = i2c_get_clientdata(client);
-
- data->interval = HZ; /* 1 sec default */
- data->valid = 0;
- data->config = CFG_CR0076;
- data->model = 0;
- data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
-
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG,
- data->config);
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
- R1FE_MASK | R2FE_MASK);
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
- data->trutherm);
- i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
- data->model);
-}
-
static int lm95241_remove(struct i2c_client *client)
{
struct lm95241_data *data = i2c_get_clientdata(client);
@@ -413,46 +421,9 @@ static int lm95241_remove(struct i2c_client *client)
return 0;
}
-static struct lm95241_data *lm95241_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct lm95241_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + data->interval) ||
- !data->valid) {
- dev_dbg(&client->dev, "Updating lm95241 data.\n");
- data->local_h =
- i2c_smbus_read_byte_data(client,
- LM95241_REG_R_LOCAL_TEMPH);
- data->local_l =
- i2c_smbus_read_byte_data(client,
- LM95241_REG_R_LOCAL_TEMPL);
- data->remote1_h =
- i2c_smbus_read_byte_data(client,
- LM95241_REG_R_REMOTE1_TEMPH);
- data->remote1_l =
- i2c_smbus_read_byte_data(client,
- LM95241_REG_R_REMOTE1_TEMPL);
- data->remote2_h =
- i2c_smbus_read_byte_data(client,
- LM95241_REG_R_REMOTE2_TEMPH);
- data->remote2_l =
- i2c_smbus_read_byte_data(client,
- LM95241_REG_R_REMOTE2_TEMPL);
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
-
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95241_id[] = {
- { "lm95241", 0 },
+ { DEVNAME, 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95241_id);
@@ -460,7 +431,7 @@ MODULE_DEVICE_TABLE(i2c, lm95241_id);
static struct i2c_driver lm95241_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
- .name = "lm95241",
+ .name = DEVNAME,
},
.probe = lm95241_probe,
.remove = lm95241_remove,
@@ -479,7 +450,7 @@ static void __exit sensors_lm95241_exit(void)
i2c_del_driver(&lm95241_driver);
}
-MODULE_AUTHOR("Davide Rizzo <elpa-rizzo@gmail.com>");
+MODULE_AUTHOR("Davide Rizzo <elpa.rizzo@gmail.com>");
MODULE_DESCRIPTION("LM95241 sensor driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 68e69a49633c..3d99b8854d7c 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -33,6 +33,8 @@
* the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1031,16 +1033,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
val = superio_inb(sioaddr, ACT);
if (!(val & 0x01)) {
- printk(KERN_INFO "pc87360: Device 0x%02x not "
- "activated\n", logdev[i]);
+ pr_info("Device 0x%02x not activated\n", logdev[i]);
continue;
}
val = (superio_inb(sioaddr, BASE) << 8)
| superio_inb(sioaddr, BASE + 1);
if (!val) {
- printk(KERN_INFO "pc87360: Base address not set for "
- "device 0x%02x\n", logdev[i]);
+ pr_info("Base address not set for device 0x%02x\n",
+ logdev[i]);
continue;
}
@@ -1050,17 +1051,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
confreg[0] = superio_inb(sioaddr, 0xF0);
confreg[1] = superio_inb(sioaddr, 0xF1);
-#ifdef DEBUG
- printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
- "ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
- (confreg[0]>>3)&1, (confreg[0]>>4)&1);
- printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
- "ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
- (confreg[0]>>6)&1, (confreg[0]>>7)&1);
- printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
- "ctrl=%d inv=%d\n", confreg[1]&1,
- (confreg[1]>>1)&1, (confreg[1]>>2)&1);
-#endif
+ pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 1,
+ (confreg[0] >> 2) & 1, (confreg[0] >> 3) & 1,
+ (confreg[0] >> 4) & 1);
+ pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 2,
+ (confreg[0] >> 5) & 1, (confreg[0] >> 6) & 1,
+ (confreg[0] >> 7) & 1);
+ pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 3,
+ confreg[1] & 1, (confreg[1] >> 1) & 1,
+ (confreg[1] >> 2) & 1);
} else if (i==1) { /* Voltages */
/* Are we using thermistors? */
if (*devid == 0xE9) { /* PC87366 */
@@ -1071,14 +1070,12 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
confreg[3] = superio_inb(sioaddr, 0x25);
if (confreg[2] & 0x40) {
- printk(KERN_INFO "pc87360: Using "
- "thermistors for temperature "
- "monitoring\n");
+ pr_info("Using thermistors for "
+ "temperature monitoring\n");
}
if (confreg[3] & 0xE0) {
- printk(KERN_INFO "pc87360: VID "
- "inputs routed (mode %u)\n",
- confreg[3] >> 5);
+ pr_info("VID inputs routed (mode %u)\n",
+ confreg[3] >> 5);
}
}
}
@@ -1616,7 +1613,7 @@ static int __init pc87360_device_add(unsigned short address)
pdev = platform_device_alloc("pc87360", address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR "pc87360: Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
@@ -1639,15 +1636,13 @@ static int __init pc87360_device_add(unsigned short address)
err = platform_device_add_resources(pdev, res, res_count);
if (err) {
- printk(KERN_ERR "pc87360: Device resources addition failed "
- "(%d)\n", err);
+ pr_err("Device resources addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR "pc87360: Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
@@ -1666,8 +1661,7 @@ static int __init pc87360_init(void)
if (pc87360_find(0x2e, &devid, extra_isa)
&& pc87360_find(0x4e, &devid, extra_isa)) {
- printk(KERN_WARNING "pc87360: PC8736x not detected, "
- "module not inserted.\n");
+ pr_warn("PC8736x not detected, module not inserted\n");
return -ENODEV;
}
@@ -1680,8 +1674,7 @@ static int __init pc87360_init(void)
}
if (address == 0x0000) {
- printk(KERN_WARNING "pc87360: No active logical device, "
- "module not inserted.\n");
+ pr_warn("No active logical device, module not inserted\n");
return -ENODEV;
}
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
index 9ec4daaf6ca6..8da2181630b1 100644
--- a/drivers/hwmon/pc87427.c
+++ b/drivers/hwmon/pc87427.c
@@ -22,6 +22,8 @@
* mode, and voltages aren't supported at all.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1077,7 +1079,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Out of memory\n");
+ pr_err("Out of memory\n");
goto exit;
}
@@ -1196,28 +1198,26 @@ static int __init pc87427_device_add(const struct pc87427_sio_data *sio_data)
pdev = platform_device_alloc(DRVNAME, res[0].start);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, res, res_count);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct pc87427_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
@@ -1249,23 +1249,23 @@ static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data)
val = superio_inb(sioaddr, SIOREG_ACT);
if (!(val & 0x01)) {
- printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
- "not activated\n", logdev[i]);
+ pr_info("Logical device 0x%02x not activated\n",
+ logdev[i]);
continue;
}
val = superio_inb(sioaddr, SIOREG_MAP);
if (val & 0x01) {
- printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
- "is memory-mapped, can't use\n", logdev[i]);
+ pr_warn("Logical device 0x%02x is memory-mapped, "
+ "can't use\n", logdev[i]);
continue;
}
val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
| superio_inb(sioaddr, SIOREG_IOBASE + 1);
if (!val) {
- printk(KERN_INFO DRVNAME ": I/O base address not set "
- "for logical device 0x%02x\n", logdev[i]);
+ pr_info("I/O base address not set for logical device "
+ "0x%02x\n", logdev[i]);
continue;
}
sio_data->address[i] = val;
diff --git a/drivers/hwmon/pcf8591.c b/drivers/hwmon/pcf8591.c
index dc7259d69812..731b09af76b9 100644
--- a/drivers/hwmon/pcf8591.c
+++ b/drivers/hwmon/pcf8591.c
@@ -18,6 +18,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -290,8 +292,7 @@ static struct i2c_driver pcf8591_driver = {
static int __init pcf8591_init(void)
{
if (input_mode < 0 || input_mode > 3) {
- printk(KERN_WARNING "pcf8591: invalid input_mode (%d)\n",
- input_mode);
+ pr_warn("invalid input_mode (%d)\n", input_mode);
input_mode = 0;
}
return i2c_add_driver(&pcf8591_driver);
diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
index 0798210590bc..21c817d98123 100644
--- a/drivers/hwmon/pkgtemp.c
+++ b/drivers/hwmon/pkgtemp.c
@@ -20,6 +20,8 @@
* 02110-1301 USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -303,7 +305,7 @@ static int __cpuinit pkgtemp_device_add(unsigned int cpu)
pdev = platform_device_alloc(DRVNAME, cpu);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
@@ -315,8 +317,7 @@ static int __cpuinit pkgtemp_device_add(unsigned int cpu)
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_free;
}
diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
new file mode 100644
index 000000000000..1c8c9812f244
--- /dev/null
+++ b/drivers/hwmon/sht21.c
@@ -0,0 +1,307 @@
+/* Sensirion SHT21 humidity and temperature sensor driver
+ *
+ * Copyright (C) 2010 Urs Fleisch <urs.fleisch@sensirion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Data sheet available (5/2010) at
+ * http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT21.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+
+/* I2C command bytes */
+#define SHT21_TRIG_T_MEASUREMENT_HM 0xe3
+#define SHT21_TRIG_RH_MEASUREMENT_HM 0xe5
+
+/**
+ * struct sht21 - SHT21 device specific data
+ * @hwmon_dev: device registered with hwmon
+ * @lock: mutex to protect measurement values
+ * @valid: only 0 before first measurement is taken
+ * @last_update: time of last update (jiffies)
+ * @temperature: cached temperature measurement value
+ * @humidity: cached humidity measurement value
+ */
+struct sht21 {
+ struct device *hwmon_dev;
+ struct mutex lock;
+ char valid;
+ unsigned long last_update;
+ int temperature;
+ int humidity;
+};
+
+/**
+ * sht21_temp_ticks_to_millicelsius() - convert raw temperature ticks to
+ * milli celsius
+ * @ticks: temperature ticks value received from sensor
+ */
+static inline int sht21_temp_ticks_to_millicelsius(int ticks)
+{
+ ticks &= ~0x0003; /* clear status bits */
+ /*
+ * Formula T = -46.85 + 175.72 * ST / 2^16 from data sheet 6.2,
+ * optimized for integer fixed point (3 digits) arithmetic
+ */
+ return ((21965 * ticks) >> 13) - 46850;
+}
+
+/**
+ * sht21_rh_ticks_to_per_cent_mille() - convert raw humidity ticks to
+ * one-thousandths of a percent relative humidity
+ * @ticks: humidity ticks value received from sensor
+ */
+static inline int sht21_rh_ticks_to_per_cent_mille(int ticks)
+{
+ ticks &= ~0x0003; /* clear status bits */
+ /*
+ * Formula RH = -6 + 125 * SRH / 2^16 from data sheet 6.1,
+ * optimized for integer fixed point (3 digits) arithmetic
+ */
+ return ((15625 * ticks) >> 13) - 6000;
+}
+
+/**
+ * sht21_read_word_data() - read word from register
+ * @client: I2C client device
+ * @reg: I2C command byte
+ *
+ * Returns value, negative errno on error.
+ */
+static inline int sht21_read_word_data(struct i2c_client *client, u8 reg)
+{
+ int ret = i2c_smbus_read_word_data(client, reg);
+ if (ret < 0)
+ return ret;
+ /*
+ * SMBus specifies low byte first, but the SHT21 returns MSB
+ * first, so we have to swab16 the values
+ */
+ return swab16(ret);
+}
+
+/**
+ * sht21_update_measurements() - get updated measurements from device
+ * @client: I2C client device
+ *
+ * Returns 0 on success, else negative errno.
+ */
+static int sht21_update_measurements(struct i2c_client *client)
+{
+ int ret = 0;
+ struct sht21 *sht21 = i2c_get_clientdata(client);
+
+ mutex_lock(&sht21->lock);
+ /*
+ * Data sheet 2.4:
+ * SHT2x should not be active for more than 10% of the time - e.g.
+ * maximum two measurements per second at 12bit accuracy shall be made.
+ */
+ if (time_after(jiffies, sht21->last_update + HZ / 2) || !sht21->valid) {
+ ret = sht21_read_word_data(client, SHT21_TRIG_T_MEASUREMENT_HM);
+ if (ret < 0)
+ goto out;
+ sht21->temperature = sht21_temp_ticks_to_millicelsius(ret);
+ ret = sht21_read_word_data(client,
+ SHT21_TRIG_RH_MEASUREMENT_HM);
+ if (ret < 0)
+ goto out;
+ sht21->humidity = sht21_rh_ticks_to_per_cent_mille(ret);
+ sht21->last_update = jiffies;
+ sht21->valid = 1;
+ }
+out:
+ mutex_unlock(&sht21->lock);
+
+ return ret >= 0 ? 0 : ret;
+}
+
+/**
+ * sht21_show_temperature() - show temperature measurement value in sysfs
+ * @dev: device
+ * @attr: device attribute
+ * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
+ *
+ * Will be called on read access to temp1_input sysfs attribute.
+ * Returns number of bytes written into buffer, negative errno on error.
+ */
+static ssize_t sht21_show_temperature(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sht21 *sht21 = i2c_get_clientdata(client);
+ int ret = sht21_update_measurements(client);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%d\n", sht21->temperature);
+}
+
+/**
+ * sht21_show_humidity() - show humidity measurement value in sysfs
+ * @dev: device
+ * @attr: device attribute
+ * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
+ *
+ * Will be called on read access to humidity1_input sysfs attribute.
+ * Returns number of bytes written into buffer, negative errno on error.
+ */
+static ssize_t sht21_show_humidity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sht21 *sht21 = i2c_get_clientdata(client);
+ int ret = sht21_update_measurements(client);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%d\n", sht21->humidity);
+}
+
+/* sysfs attributes */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sht21_show_temperature,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO, sht21_show_humidity,
+ NULL, 0);
+
+static struct attribute *sht21_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_humidity1_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group sht21_attr_group = {
+ .attrs = sht21_attributes,
+};
+
+/**
+ * sht21_probe() - probe device
+ * @client: I2C client device
+ * @id: device ID
+ *
+ * Called by the I2C core when an entry in the ID table matches a
+ * device's name.
+ * Returns 0 on success.
+ */
+static int __devinit sht21_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sht21 *sht21;
+ int err;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_err(&client->dev,
+ "adapter does not support SMBus word transactions\n");
+ return -ENODEV;
+ }
+
+ sht21 = kzalloc(sizeof(*sht21), GFP_KERNEL);
+ if (!sht21) {
+ dev_dbg(&client->dev, "kzalloc failed\n");
+ return -ENOMEM;
+ }
+ i2c_set_clientdata(client, sht21);
+
+ mutex_init(&sht21->lock);
+
+ err = sysfs_create_group(&client->dev.kobj, &sht21_attr_group);
+ if (err) {
+ dev_dbg(&client->dev, "could not create sysfs files\n");
+ goto fail_free;
+ }
+ sht21->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(sht21->hwmon_dev)) {
+ dev_dbg(&client->dev, "unable to register hwmon device\n");
+ err = PTR_ERR(sht21->hwmon_dev);
+ goto fail_remove_sysfs;
+ }
+
+ dev_info(&client->dev, "initialized\n");
+
+ return 0;
+
+fail_remove_sysfs:
+ sysfs_remove_group(&client->dev.kobj, &sht21_attr_group);
+fail_free:
+ kfree(sht21);
+
+ return err;
+}
+
+/**
+ * sht21_remove() - remove device
+ * @client: I2C client device
+ */
+static int __devexit sht21_remove(struct i2c_client *client)
+{
+ struct sht21 *sht21 = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(sht21->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &sht21_attr_group);
+ kfree(sht21);
+
+ return 0;
+}
+
+/* Device ID table */
+static const struct i2c_device_id sht21_id[] = {
+ { "sht21", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sht21_id);
+
+static struct i2c_driver sht21_driver = {
+ .driver.name = "sht21",
+ .probe = sht21_probe,
+ .remove = __devexit_p(sht21_remove),
+ .id_table = sht21_id,
+};
+
+/**
+ * sht21_init() - initialize driver
+ *
+ * Called when kernel is booted or module is inserted.
+ * Returns 0 on success.
+ */
+static int __init sht21_init(void)
+{
+ return i2c_add_driver(&sht21_driver);
+}
+module_init(sht21_init);
+
+/**
+ * sht21_init() - clean up driver
+ *
+ * Called when module is removed.
+ */
+static void __exit sht21_exit(void)
+{
+ i2c_del_driver(&sht21_driver);
+}
+module_exit(sht21_exit);
+
+MODULE_AUTHOR("Urs Fleisch <urs.fleisch@sensirion.com>");
+MODULE_DESCRIPTION("Sensirion SHT21 humidity and temperature sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 79c2931e3008..47d7ce9af8fb 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -50,6 +50,8 @@
735 0008 0735
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
@@ -735,21 +737,19 @@ static int __devinit sis5595_device_add(unsigned short address)
pdev = platform_device_alloc("sis5595", address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR "sis5595: Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR "sis5595: Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR "sis5595: Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index f46d936c12da..9fb7516e6f45 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -26,6 +26,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
@@ -311,21 +313,19 @@ static int __init smsc47b397_device_add(unsigned short address)
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
@@ -367,8 +367,7 @@ static int __init smsc47b397_find(unsigned short *addr)
*addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
| superio_inb(SUPERIO_REG_BASE_LSB);
- printk(KERN_INFO DRVNAME ": found SMSC %s "
- "(base address 0x%04x, revision %u)\n",
+ pr_info("found SMSC %s (base address 0x%04x, revision %u)\n",
name, *addr, rev);
superio_exit();
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 8fa462f2b570..f44a89aac381 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -26,6 +26,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
@@ -435,30 +437,29 @@ static int __init smsc47m1_find(unsigned short *addr,
*/
switch (val) {
case 0x51:
- pr_info(DRVNAME ": Found SMSC LPC47B27x\n");
+ pr_info("Found SMSC LPC47B27x\n");
sio_data->type = smsc47m1;
break;
case 0x59:
- pr_info(DRVNAME ": Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
+ pr_info("Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
sio_data->type = smsc47m1;
break;
case 0x5F:
- pr_info(DRVNAME ": Found SMSC LPC47M14x\n");
+ pr_info("Found SMSC LPC47M14x\n");
sio_data->type = smsc47m1;
break;
case 0x60:
- pr_info(DRVNAME ": Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
+ pr_info("Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
sio_data->type = smsc47m1;
break;
case 0x6B:
if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
- pr_debug(DRVNAME ": "
- "Found SMSC LPC47M233, unsupported\n");
+ pr_debug("Found SMSC LPC47M233, unsupported\n");
superio_exit();
return -ENODEV;
}
- pr_info(DRVNAME ": Found SMSC LPC47M292\n");
+ pr_info("Found SMSC LPC47M292\n");
sio_data->type = smsc47m2;
break;
default:
@@ -470,7 +471,7 @@ static int __init smsc47m1_find(unsigned short *addr,
*addr = (superio_inb(SUPERIO_REG_BASE) << 8)
| superio_inb(SUPERIO_REG_BASE + 1);
if (*addr == 0) {
- pr_info(DRVNAME ": Device address not set, will not use\n");
+ pr_info("Device address not set, will not use\n");
superio_exit();
return -ENODEV;
}
@@ -479,7 +480,7 @@ static int __init smsc47m1_find(unsigned short *addr,
* Compaq Presario S4000NX) */
sio_data->activate = superio_inb(SUPERIO_REG_ACT);
if ((sio_data->activate & 0x01) == 0) {
- pr_info(DRVNAME ": Enabling device\n");
+ pr_info("Enabling device\n");
superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01);
}
@@ -494,7 +495,7 @@ static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
superio_enter();
superio_select();
- pr_info(DRVNAME ": Disabling device\n");
+ pr_info("Disabling device\n");
superio_outb(SUPERIO_REG_ACT, sio_data->activate);
superio_exit();
@@ -823,28 +824,26 @@ static int __init smsc47m1_device_add(unsigned short address,
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct smsc47m1_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c
index ec7fad747adc..0d18de424c66 100644
--- a/drivers/hwmon/via-cputemp.c
+++ b/drivers/hwmon/via-cputemp.c
@@ -21,6 +21,8 @@
* 02110-1301 USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -202,7 +204,7 @@ static int __cpuinit via_cputemp_device_add(unsigned int cpu)
pdev = platform_device_alloc(DRVNAME, cpu);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
@@ -214,8 +216,7 @@ static int __cpuinit via_cputemp_device_add(unsigned int cpu)
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_free;
}
@@ -237,13 +238,16 @@ exit:
static void __cpuinit via_cputemp_device_remove(unsigned int cpu)
{
- struct pdev_entry *p, *n;
+ struct pdev_entry *p;
+
mutex_lock(&pdev_list_mutex);
- list_for_each_entry_safe(p, n, &pdev_list, list) {
+ list_for_each_entry(p, &pdev_list, list) {
if (p->cpu == cpu) {
platform_device_unregister(p->pdev);
list_del(&p->list);
+ mutex_unlock(&pdev_list_mutex);
kfree(p);
+ return;
}
}
mutex_unlock(&pdev_list_mutex);
@@ -273,7 +277,6 @@ static struct notifier_block via_cputemp_cpu_notifier __refdata = {
static int __init via_cputemp_init(void)
{
int i, err;
- struct pdev_entry *p, *n;
if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) {
printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n");
@@ -295,33 +298,27 @@ static int __init via_cputemp_init(void)
continue;
if (c->x86_model > 0x0f) {
- printk(KERN_WARNING DRVNAME ": Unknown CPU "
- "model 0x%x\n", c->x86_model);
+ pr_warn("Unknown CPU model 0x%x\n", c->x86_model);
continue;
}
- err = via_cputemp_device_add(i);
- if (err)
- goto exit_devices_unreg;
+ via_cputemp_device_add(i);
}
+
+#ifndef CONFIG_HOTPLUG_CPU
if (list_empty(&pdev_list)) {
err = -ENODEV;
goto exit_driver_unreg;
}
+#endif
register_hotcpu_notifier(&via_cputemp_cpu_notifier);
return 0;
-exit_devices_unreg:
- mutex_lock(&pdev_list_mutex);
- list_for_each_entry_safe(p, n, &pdev_list, list) {
- platform_device_unregister(p->pdev);
- list_del(&p->list);
- kfree(p);
- }
- mutex_unlock(&pdev_list_mutex);
+#ifndef CONFIG_HOTPLUG_CPU
exit_driver_unreg:
platform_driver_unregister(&via_cputemp_driver);
+#endif
exit:
return err;
}
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index f397ce7ad598..25e91665a0a2 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -30,6 +30,8 @@
Warning - only supports a single device.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
@@ -687,6 +689,13 @@ static int __devexit via686a_remove(struct platform_device *pdev)
return 0;
}
+static void via686a_update_fan_div(struct via686a_data *data)
+{
+ int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+ data->fan_div[0] = (reg >> 4) & 0x03;
+ data->fan_div[1] = reg >> 6;
+}
+
static void __devinit via686a_init_device(struct via686a_data *data)
{
u8 reg;
@@ -700,6 +709,9 @@ static void __devinit via686a_init_device(struct via686a_data *data)
via686a_write_value(data, VIA686A_REG_TEMP_MODE,
(reg & ~VIA686A_TEMP_MODE_MASK)
| VIA686A_TEMP_MODE_CONTINUOUS);
+
+ /* Pre-read fan clock divisor values */
+ via686a_update_fan_div(data);
}
static struct via686a_data *via686a_update_device(struct device *dev)
@@ -751,9 +763,7 @@ static struct via686a_data *via686a_update_device(struct device *dev)
(via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0xc0) >> 6;
- i = via686a_read_value(data, VIA686A_REG_FANDIV);
- data->fan_div[0] = (i >> 4) & 0x03;
- data->fan_div[1] = i >> 6;
+ via686a_update_fan_div(data);
data->alarms =
via686a_read_value(data,
VIA686A_REG_ALARM1) |
@@ -791,21 +801,19 @@ static int __devinit via686a_device_add(unsigned short address)
pdev = platform_device_alloc("via686a", address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR "via686a: Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR "via686a: Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR "via686a: Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index ae33bbb577c7..49163d48e966 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -21,6 +21,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1254,8 +1256,7 @@ static int __init vt1211_device_add(unsigned short address)
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed (%d)\n",
- err);
+ pr_err("Device allocation failed (%d)\n", err);
goto EXIT;
}
@@ -1266,15 +1267,13 @@ static int __init vt1211_device_add(unsigned short address)
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto EXIT_DEV_PUT;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto EXIT_DEV_PUT;
}
@@ -1301,23 +1300,20 @@ static int __init vt1211_find(int sio_cip, unsigned short *address)
superio_select(sio_cip, SIO_VT1211_LDN_HWMON);
if ((superio_inb(sio_cip, SIO_VT1211_ACTIVE) & 1) == 0) {
- printk(KERN_WARNING DRVNAME ": HW monitor is disabled, "
- "skipping\n");
+ pr_warn("HW monitor is disabled, skipping\n");
goto EXIT;
}
*address = ((superio_inb(sio_cip, SIO_VT1211_BADDR) << 8) |
(superio_inb(sio_cip, SIO_VT1211_BADDR + 1))) & 0xff00;
if (*address == 0) {
- printk(KERN_WARNING DRVNAME ": Base address is not set, "
- "skipping\n");
+ pr_warn("Base address is not set, skipping\n");
goto EXIT;
}
err = 0;
- printk(KERN_INFO DRVNAME ": Found VT1211 chip at 0x%04x, "
- "revision %u\n", *address,
- superio_inb(sio_cip, SIO_VT1211_DEVREV));
+ pr_info("Found VT1211 chip at 0x%04x, revision %u\n",
+ *address, superio_inb(sio_cip, SIO_VT1211_DEVREV));
EXIT:
superio_exit(sio_cip);
@@ -1336,15 +1332,15 @@ static int __init vt1211_init(void)
if ((uch_config < -1) || (uch_config > 31)) {
err = -EINVAL;
- printk(KERN_WARNING DRVNAME ": Invalid UCH configuration %d. "
- "Choose a value between 0 and 31.\n", uch_config);
+ pr_warn("Invalid UCH configuration %d. "
+ "Choose a value between 0 and 31.\n", uch_config);
goto EXIT;
}
if ((int_mode < -1) || (int_mode > 0)) {
err = -EINVAL;
- printk(KERN_WARNING DRVNAME ": Invalid interrupt mode %d. "
- "Only mode 0 is supported.\n", int_mode);
+ pr_warn("Invalid interrupt mode %d. "
+ "Only mode 0 is supported.\n", int_mode);
goto EXIT;
}
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index e6078c9f0e27..db3b2e8d2a67 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -24,6 +24,8 @@
/* Supports VIA VT8231 South Bridge embedded sensors
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -902,21 +904,19 @@ static int __devinit vt8231_device_add(unsigned short address)
pdev = platform_device_alloc("vt8231", address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR "vt8231: Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR "vt8231: Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR "vt8231: Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 072c58008a63..073eabedc432 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -42,6 +42,8 @@
w83667hg-b 9 5 3 3 0xb350 0xc1 0x5ca3
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1668,8 +1670,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
break;
default:
if (val != 0xffff)
- pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n",
- val);
+ pr_debug("unsupported chip ID: 0x%04x\n", val);
superio_exit(sioaddr);
return -ENODEV;
}
@@ -1680,8 +1681,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
| superio_inb(sioaddr, SIO_REG_ADDR + 1);
*addr = val & IOREGION_ALIGNMENT;
if (*addr == 0) {
- printk(KERN_ERR DRVNAME ": Refusing to enable a Super-I/O "
- "device with a base I/O port 0.\n");
+ pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
superio_exit(sioaddr);
return -ENODEV;
}
@@ -1689,13 +1689,12 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
/* Activate logical device if needed */
val = superio_inb(sioaddr, SIO_REG_ENABLE);
if (!(val & 0x01)) {
- printk(KERN_WARNING DRVNAME ": Forcibly enabling Super-I/O. "
- "Sensor is probably unusable.\n");
+ pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
}
superio_exit(sioaddr);
- pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, *addr);
+ pr_info("Found %s chip at %#x\n", sio_name, *addr);
sio_data->sioreg = sioaddr;
return 0;
@@ -1729,14 +1728,14 @@ static int __init sensors_w83627ehf_init(void)
if (!(pdev = platform_device_alloc(DRVNAME, address))) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit_unregister;
}
err = platform_device_add_data(pdev, &sio_data,
sizeof(struct w83627ehf_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
@@ -1752,16 +1751,14 @@ static int __init sensors_w83627ehf_init(void)
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
/* platform_device_add calls probe() */
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 38e280523071..bde50e34d013 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -39,6 +39,8 @@
supported yet.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1166,14 +1168,13 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
superio_inb(sio_data, WINB_BASE_REG + 1);
*addr = val & WINB_ALIGNMENT;
if (*addr == 0) {
- printk(KERN_WARNING DRVNAME ": Base address not set, "
- "skipping\n");
+ pr_warn("Base address not set, skipping\n");
goto exit;
}
val = superio_inb(sio_data, WINB_ACT_REG);
if (!(val & 0x01)) {
- printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
+ pr_warn("Enabling HWM logical device\n");
superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
}
@@ -1789,28 +1790,26 @@ static int __init w83627hf_device_add(unsigned short address,
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct w83627hf_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index c84b9b4e6960..eed43a008be1 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -33,6 +33,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1798,8 +1800,7 @@ w83781d_isa_found(unsigned short address)
* individually for the probing phase. */
for (port = address; port < address + W83781D_EXTENT; port++) {
if (!request_region(port, 1, "w83781d")) {
- pr_debug("w83781d: Failed to request port 0x%x\n",
- port);
+ pr_debug("Failed to request port 0x%x\n", port);
goto release;
}
}
@@ -1811,7 +1812,7 @@ w83781d_isa_found(unsigned short address)
if (inb_p(address + 2) != val
|| inb_p(address + 3) != val
|| inb_p(address + 7) != val) {
- pr_debug("w83781d: Detection failed at step 1\n");
+ pr_debug("Detection failed at step %d\n", 1);
goto release;
}
#undef REALLY_SLOW_IO
@@ -1820,14 +1821,14 @@ w83781d_isa_found(unsigned short address)
MSB (busy flag) should be clear initially, set after the write. */
save = inb_p(address + W83781D_ADDR_REG_OFFSET);
if (save & 0x80) {
- pr_debug("w83781d: Detection failed at step 2\n");
+ pr_debug("Detection failed at step %d\n", 2);
goto release;
}
val = ~save & 0x7f;
outb_p(val, address + W83781D_ADDR_REG_OFFSET);
if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
outb_p(save, address + W83781D_ADDR_REG_OFFSET);
- pr_debug("w83781d: Detection failed at step 3\n");
+ pr_debug("Detection failed at step %d\n", 3);
goto release;
}
@@ -1835,7 +1836,7 @@ w83781d_isa_found(unsigned short address)
outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if (val & 0x80) {
- pr_debug("w83781d: Detection failed at step 4\n");
+ pr_debug("Detection failed at step %d\n", 4);
goto release;
}
outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
@@ -1844,19 +1845,19 @@ w83781d_isa_found(unsigned short address)
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if ((!(save & 0x80) && (val != 0xa3))
|| ((save & 0x80) && (val != 0x5c))) {
- pr_debug("w83781d: Detection failed at step 5\n");
+ pr_debug("Detection failed at step %d\n", 5);
goto release;
}
outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
- pr_debug("w83781d: Detection failed at step 6\n");
+ pr_debug("Detection failed at step %d\n", 6);
goto release;
}
/* The busy flag should be clear again */
if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
- pr_debug("w83781d: Detection failed at step 7\n");
+ pr_debug("Detection failed at step %d\n", 7);
goto release;
}
@@ -1871,7 +1872,7 @@ w83781d_isa_found(unsigned short address)
found = 1;
if (found)
- pr_info("w83781d: Found a %s chip at %#x\n",
+ pr_info("Found a %s chip at %#x\n",
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release:
@@ -1894,21 +1895,19 @@ w83781d_isa_device_add(unsigned short address)
pdev = platform_device_alloc("w83781d", address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR "w83781d: Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR "w83781d: Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 679718e6b017..63841f8cec07 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -691,7 +691,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
}
static ssize_t
-show_regs_chassis(struct device *dev, struct device_attribute *attr,
+show_chassis(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct w83792d_data *data = w83792d_update_device(dev);
@@ -699,6 +699,16 @@ show_regs_chassis(struct device *dev, struct device_attribute *attr,
}
static ssize_t
+show_regs_chassis(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ dev_warn(dev,
+ "Attribute %s is deprecated, use intrusion0_alarm instead\n",
+ "chassis");
+ return show_chassis(dev, attr, buf);
+}
+
+static ssize_t
show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83792d_data *data = w83792d_update_device(dev);
@@ -706,7 +716,7 @@ show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
}
static ssize_t
-store_chassis_clear(struct device *dev, struct device_attribute *attr,
+store_chassis_clear_legacy(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -714,6 +724,10 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
u32 val;
u8 temp1 = 0, temp2 = 0;
+ dev_warn(dev,
+ "Attribute %s is deprecated, use intrusion0_alarm instead\n",
+ "chassis_clear");
+
val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->chassis_clear = SENSORS_LIMIT(val, 0 ,1);
@@ -726,6 +740,27 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
return count;
}
+static ssize_t
+store_chassis_clear(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83792d_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+ u8 reg;
+
+ if (strict_strtoul(buf, 10, &val) || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR);
+ w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80);
+ data->valid = 0; /* Force cache refresh */
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
/* For Smart Fan I / Thermal Cruise */
static ssize_t
show_thermal_cruise(struct device *dev, struct device_attribute *attr,
@@ -1012,7 +1047,9 @@ static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
- show_chassis_clear, store_chassis_clear);
+ show_chassis_clear, store_chassis_clear_legacy);
+static DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
+ show_chassis, store_chassis_clear);
static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
@@ -1214,6 +1251,7 @@ static struct attribute *w83792d_attributes[] = {
&dev_attr_alarms.attr,
&dev_attr_chassis.attr,
&dev_attr_chassis_clear.attr,
+ &dev_attr_intrusion0_alarm.attr,
&sensor_dev_attr_tolerance1.dev_attr.attr,
&sensor_dev_attr_thermal_cruise1.dev_attr.attr,
&sensor_dev_attr_tolerance2.dev_attr.attr,
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 8e540ada47d2..e3bdedfb5347 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -51,7 +51,6 @@
#define WATCHDOG_TIMEOUT 2 /* 2 minute default timeout */
/* Addresses to scan */
-static DEFINE_MUTEX(watchdog_mutex);
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
I2C_CLIENT_END };
@@ -421,14 +420,17 @@ store_beep_enable(struct device *dev, struct device_attribute *attr,
/* Write any value to clear chassis alarm */
static ssize_t
-store_chassis_clear(struct device *dev,
- struct device_attribute *attr, const char *buf,
- size_t count)
+store_chassis_clear_legacy(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83793_data *data = i2c_get_clientdata(client);
u8 val;
+ dev_warn(dev, "Attribute chassis is deprecated, "
+ "use intrusion0_alarm instead\n");
+
mutex_lock(&data->update_lock);
val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
val |= 0x80;
@@ -437,6 +439,28 @@ store_chassis_clear(struct device *dev,
return count;
}
+/* Write 0 to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83793_data *data = i2c_get_clientdata(client);
+ unsigned long val;
+ u8 reg;
+
+ if (strict_strtoul(buf, 10, &val) || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ reg = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
+ w83793_write_value(client, W83793_REG_CLR_CHASSIS, reg | 0x80);
+ data->valid = 0; /* Force cache refresh */
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
#define FAN_INPUT 0
#define FAN_MIN 1
static ssize_t
@@ -1102,6 +1126,8 @@ static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
static struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+ store_chassis_clear_legacy, ALARM_STATUS, 30),
+ SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 30),
SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
store_beep_enable, NOT_USED, NOT_USED),
@@ -1323,7 +1349,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
static long watchdog_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
- static struct watchdog_info ident = {
+ struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT |
WDIOF_CARDRESET,
@@ -1333,7 +1359,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
int val, ret = 0;
struct w83793_data *data = filp->private_data;
- mutex_lock(&watchdog_mutex);
switch (cmd) {
case WDIOC_GETSUPPORT:
if (!nowayout)
@@ -1387,7 +1412,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
default:
ret = -ENOTTY;
}
- mutex_unlock(&watchdog_mutex);
return ret;
}
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index cdbc7448491e..845232d7f611 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -458,6 +458,7 @@ static void w83795_update_limits(struct i2c_client *client)
{
struct w83795_data *data = i2c_get_clientdata(client);
int i, limit;
+ u8 lsb;
/* Read the voltage limits */
for (i = 0; i < ARRAY_SIZE(data->in); i++) {
@@ -479,9 +480,8 @@ static void w83795_update_limits(struct i2c_client *client)
}
/* Read the fan limits */
+ lsb = 0; /* Silent false gcc warning */
for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
- u8 lsb;
-
/* Each register contains LSB for 2 fans, but we want to
* read it only once to save time */
if ((i & 1) == 0 && (data->has_fan & (3 << i)))