diff options
Diffstat (limited to 'drivers/cpufreq')
-rw-r--r-- | drivers/cpufreq/cpufreq_conservative.c | 4 | ||||
-rw-r--r-- | drivers/cpufreq/cpufreq_ondemand.c | 6 | ||||
-rw-r--r-- | drivers/cpufreq/db8500-cpufreq.c | 38 | ||||
-rw-r--r-- | drivers/cpufreq/e_powersaver.c | 135 | ||||
-rw-r--r-- | drivers/cpufreq/exynos4210-cpufreq.c | 129 |
5 files changed, 276 insertions, 36 deletions
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 33b56e5c5c14..c97b468ee9f7 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -120,10 +120,12 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) { - u64 idle_time = get_cpu_idle_time_us(cpu, wall); + u64 idle_time = get_cpu_idle_time_us(cpu, NULL); if (idle_time == -1ULL) return get_cpu_idle_time_jiffy(cpu, wall); + else + idle_time += get_cpu_iowait_time_us(cpu, wall); return idle_time; } diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 891360edecdd..fa8af4ebb1d6 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -144,10 +144,12 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) { - u64 idle_time = get_cpu_idle_time_us(cpu, wall); + u64 idle_time = get_cpu_idle_time_us(cpu, NULL); if (idle_time == -1ULL) return get_cpu_idle_time_jiffy(cpu, wall); + else + idle_time += get_cpu_iowait_time_us(cpu, wall); return idle_time; } @@ -725,7 +727,7 @@ static int __init cpufreq_gov_dbs_init(void) dbs_tuners_ins.down_differential = MICRO_FREQUENCY_DOWN_DIFFERENTIAL; /* - * In no_hz/micro accounting case we set the minimum frequency + * In nohz/micro accounting case we set the minimum frequency * not depending on HZ, but fixed (very low). The deferred * timer might skip some samples if idle/sleeping as needed. */ diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index d90456a809f9..edaa987621ea 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -12,30 +12,35 @@ #include <linux/cpufreq.h> #include <linux/delay.h> #include <linux/slab.h> -#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/dbx500-prcmu.h> #include <mach/id.h> static struct cpufreq_frequency_table freq_table[] = { [0] = { .index = 0, - .frequency = 300000, + .frequency = 200000, }, [1] = { .index = 1, - .frequency = 600000, + .frequency = 300000, }, [2] = { - /* Used for MAX_OPP, if available */ .index = 2, - .frequency = CPUFREQ_TABLE_END, + .frequency = 600000, }, [3] = { + /* Used for MAX_OPP, if available */ .index = 3, .frequency = CPUFREQ_TABLE_END, }, + [4] = { + .index = 4, + .frequency = CPUFREQ_TABLE_END, + }, }; static enum arm_opp idx2opp[] = { + ARM_EXTCLK, ARM_50_OPP, ARM_100_OPP, ARM_MAX_OPP @@ -72,13 +77,13 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, freqs.old = policy->cur; freqs.new = freq_table[idx].frequency; - freqs.cpu = policy->cpu; if (freqs.old == freqs.new) return 0; /* pre-change notification */ - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + for_each_cpu(freqs.cpu, policy->cpus) + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* request the PRCM unit for opp change */ if (prcmu_set_arm_opp(idx2opp[idx])) { @@ -87,7 +92,8 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy, } /* post change notification */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + for_each_cpu(freqs.cpu, policy->cpus) + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); return 0; } @@ -104,16 +110,18 @@ static unsigned int db8500_cpufreq_getspeed(unsigned int cpu) static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) { int res; - int i; BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table)); - if (cpu_is_u8500v2() && !prcmu_is_u8400()) { - freq_table[0].frequency = 400000; - freq_table[1].frequency = 800000; + if (!prcmu_is_u8400()) { + freq_table[1].frequency = 400000; + freq_table[2].frequency = 800000; if (prcmu_has_arm_maxopp()) - freq_table[2].frequency = 1000000; + freq_table[3].frequency = 1000000; } + pr_info("db8500-cpufreq : Available frequencies:\n"); + while (freq_table[i].frequency != CPUFREQ_TABLE_END) + pr_info(" %d Mhz\n", freq_table[i++].frequency/1000); /* get policy fields based on the table */ res = cpufreq_frequency_table_cpuinfo(policy, freq_table); @@ -127,10 +135,6 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy) policy->min = policy->cpuinfo.min_freq; policy->max = policy->cpuinfo.max_freq; policy->cur = db8500_cpufreq_getspeed(policy->cpu); - - for (i = 0; freq_table[i].frequency != policy->cur; i++) - ; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; /* diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 35a257dd4bb7..4bd6815d317b 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -19,6 +19,11 @@ #include <asm/msr.h> #include <asm/tsc.h> +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +#include <linux/acpi.h> +#include <acpi/processor.h> +#endif + #define EPS_BRAND_C7M 0 #define EPS_BRAND_C7 1 #define EPS_BRAND_EDEN 2 @@ -27,11 +32,59 @@ struct eps_cpu_data { u32 fsb; +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + u32 bios_limit; +#endif struct cpufreq_frequency_table freq_table[]; }; static struct eps_cpu_data *eps_cpu[NR_CPUS]; +/* Module parameters */ +static int freq_failsafe_off; +static int voltage_failsafe_off; +static int set_max_voltage; + +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +static int ignore_acpi_limit; + +static struct acpi_processor_performance *eps_acpi_cpu_perf; + +/* Minimum necessary to get acpi_processor_get_bios_limit() working */ +static int eps_acpi_init(void) +{ + eps_acpi_cpu_perf = kzalloc(sizeof(struct acpi_processor_performance), + GFP_KERNEL); + if (!eps_acpi_cpu_perf) + return -ENOMEM; + + if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map, + GFP_KERNEL)) { + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + return -ENOMEM; + } + + if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) { + free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map); + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + return -EIO; + } + return 0; +} + +static int eps_acpi_exit(struct cpufreq_policy *policy) +{ + if (eps_acpi_cpu_perf) { + acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0); + free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map); + kfree(eps_acpi_cpu_perf); + eps_acpi_cpu_perf = NULL; + } + return 0; +} +#endif static unsigned int eps_get(unsigned int cpu) { @@ -164,6 +217,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy) int k, step, voltage; int ret; int states; +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + unsigned int limit; +#endif if (policy->cpu != 0) return -ENODEV; @@ -244,11 +300,62 @@ static int eps_cpu_init(struct cpufreq_policy *policy) return -EINVAL; if (current_voltage > 0x1f || max_voltage > 0x1f) return -EINVAL; - if (max_voltage < min_voltage) + if (max_voltage < min_voltage + || current_voltage < min_voltage + || current_voltage > max_voltage) return -EINVAL; + /* Check for systems using underclocked CPU */ + if (!freq_failsafe_off && max_multiplier != current_multiplier) { + printk(KERN_INFO "eps: Your processor is running at different " + "frequency then its maximum. Aborting.\n"); + printk(KERN_INFO "eps: You can use freq_failsafe_off option " + "to disable this check.\n"); + return -EINVAL; + } + if (!voltage_failsafe_off && max_voltage != current_voltage) { + printk(KERN_INFO "eps: Your processor is running at different " + "voltage then its maximum. Aborting.\n"); + printk(KERN_INFO "eps: You can use voltage_failsafe_off " + "option to disable this check.\n"); + return -EINVAL; + } + /* Calc FSB speed */ fsb = cpu_khz / current_multiplier; + +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + /* Check for ACPI processor speed limit */ + if (!ignore_acpi_limit && !eps_acpi_init()) { + if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) { + printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n", + limit/1000000, + (limit%1000000)/10000); + eps_acpi_exit(policy); + /* Check if max_multiplier is in BIOS limits */ + if (limit && max_multiplier * fsb > limit) { + printk(KERN_INFO "eps: Aborting.\n"); + return -EINVAL; + } + } + } +#endif + + /* Allow user to set lower maximum voltage then that reported + * by processor */ + if (brand == EPS_BRAND_C7M && set_max_voltage) { + u32 v; + + /* Change mV to something hardware can use */ + v = (set_max_voltage - 700) / 16; + /* Check if voltage is within limits */ + if (v >= min_voltage && v <= max_voltage) { + printk(KERN_INFO "eps: Setting %dmV as maximum.\n", + v * 16 + 700); + max_voltage = v; + } + } + /* Calc number of p-states supported */ if (brand == EPS_BRAND_C7M) states = max_multiplier - min_multiplier + 1; @@ -265,6 +372,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Copy basic values */ centaur->fsb = fsb; +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE + centaur->bios_limit = limit; +#endif /* Fill frequency and MSR value table */ f_table = ¢aur->freq_table[0]; @@ -303,17 +413,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) static int eps_cpu_exit(struct cpufreq_policy *policy) { unsigned int cpu = policy->cpu; - struct eps_cpu_data *centaur; - u32 lo, hi; - if (eps_cpu[cpu] == NULL) - return -ENODEV; - centaur = eps_cpu[cpu]; - - /* Get max frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - /* Set max frequency */ - eps_set_state(centaur, cpu, hi & 0xffff); /* Bye */ cpufreq_frequency_table_put_attr(policy->cpu); kfree(eps_cpu[cpu]); @@ -359,6 +459,19 @@ static void __exit eps_exit(void) cpufreq_unregister_driver(&eps_driver); } +/* Allow user to overclock his machine or to change frequency to higher after + * unloading module */ +module_param(freq_failsafe_off, int, 0644); +MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check"); +module_param(voltage_failsafe_off, int, 0644); +MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check"); +#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE +module_param(ignore_acpi_limit, int, 0644); +MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit"); +#endif +module_param(set_max_voltage, int, 0644); +MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only"); + MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); MODULE_LICENSE("GPL"); diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index b7c3a84c4cfa..ab9741fab92e 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -17,6 +17,8 @@ #include <linux/slab.h> #include <linux/regulator/consumer.h> #include <linux/cpufreq.h> +#include <linux/notifier.h> +#include <linux/suspend.h> #include <mach/map.h> #include <mach/regs-clock.h> @@ -36,6 +38,10 @@ static struct regulator *int_regulator; static struct cpufreq_freqs freqs; static unsigned int memtype; +static unsigned int locking_frequency; +static bool frequency_locked; +static DEFINE_MUTEX(cpufreq_lock); + enum exynos4_memory_type { DDR2 = 4, LPDDR2, @@ -405,22 +411,32 @@ static int exynos4_target(struct cpufreq_policy *policy, { unsigned int index, old_index; unsigned int arm_volt, int_volt; + int err = -EINVAL; freqs.old = exynos4_getspeed(policy->cpu); + mutex_lock(&cpufreq_lock); + + if (frequency_locked && target_freq != locking_frequency) { + err = -EAGAIN; + goto out; + } + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, freqs.old, relation, &old_index)) - return -EINVAL; + goto out; if (cpufreq_frequency_table_target(policy, exynos4_freq_table, target_freq, relation, &index)) - return -EINVAL; + goto out; + + err = 0; freqs.new = exynos4_freq_table[index].frequency; freqs.cpu = policy->cpu; if (freqs.new == freqs.old) - return 0; + goto out; /* get the voltage value */ arm_volt = exynos4_volt_table[index].arm_volt; @@ -447,10 +463,16 @@ static int exynos4_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - return 0; +out: + mutex_unlock(&cpufreq_lock); + return err; } #ifdef CONFIG_PM +/* + * These suspend/resume are used as syscore_ops, it is already too + * late to set regulator voltages at this stage. + */ static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy) { return 0; @@ -462,8 +484,82 @@ static int exynos4_cpufreq_resume(struct cpufreq_policy *policy) } #endif +/** + * exynos4_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume + * context + * @notifier + * @pm_event + * @v + * + * While frequency_locked == true, target() ignores every frequency but + * locking_frequency. The locking_frequency value is the initial frequency, + * which is set by the bootloader. In order to eliminate possible + * inconsistency in clock values, we save and restore frequencies during + * suspend and resume and block CPUFREQ activities. Note that the standard + * suspend/resume cannot be used as they are too deep (syscore_ops) for + * regulator actions. + */ +static int exynos4_cpufreq_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, void *v) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */ + static unsigned int saved_frequency; + unsigned int temp; + + mutex_lock(&cpufreq_lock); + switch (pm_event) { + case PM_SUSPEND_PREPARE: + if (frequency_locked) + goto out; + frequency_locked = true; + + if (locking_frequency) { + saved_frequency = exynos4_getspeed(0); + + mutex_unlock(&cpufreq_lock); + exynos4_target(policy, locking_frequency, + CPUFREQ_RELATION_H); + mutex_lock(&cpufreq_lock); + } + + break; + case PM_POST_SUSPEND: + + if (saved_frequency) { + /* + * While frequency_locked, only locking_frequency + * is valid for target(). In order to use + * saved_frequency while keeping frequency_locked, + * we temporarly overwrite locking_frequency. + */ + temp = locking_frequency; + locking_frequency = saved_frequency; + + mutex_unlock(&cpufreq_lock); + exynos4_target(policy, locking_frequency, + CPUFREQ_RELATION_H); + mutex_lock(&cpufreq_lock); + + locking_frequency = temp; + } + + frequency_locked = false; + break; + } +out: + mutex_unlock(&cpufreq_lock); + + return NOTIFY_OK; +} + +static struct notifier_block exynos4_cpufreq_nb = { + .notifier_call = exynos4_cpufreq_pm_notifier, +}; + static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy) { + int ret; + policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu); cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu); @@ -479,16 +575,35 @@ static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy) */ cpumask_setall(policy->cpus); - return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table); + ret = cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table); + if (ret) + return ret; + + cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu); + + return 0; +} + +static int exynos4_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; } +static struct freq_attr *exynos4_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static struct cpufreq_driver exynos4_driver = { .flags = CPUFREQ_STICKY, .verify = exynos4_verify_speed, .target = exynos4_target, .get = exynos4_getspeed, .init = exynos4_cpufreq_cpu_init, + .exit = exynos4_cpufreq_cpu_exit, .name = "exynos4_cpufreq", + .attr = exynos4_cpufreq_attr, #ifdef CONFIG_PM .suspend = exynos4_cpufreq_suspend, .resume = exynos4_cpufreq_resume, @@ -501,6 +616,8 @@ static int __init exynos4_cpufreq_init(void) if (IS_ERR(cpu_clk)) return PTR_ERR(cpu_clk); + locking_frequency = exynos4_getspeed(0); + moutcore = clk_get(NULL, "moutcore"); if (IS_ERR(moutcore)) goto out; @@ -540,6 +657,8 @@ static int __init exynos4_cpufreq_init(void) printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); } + register_pm_notifier(&exynos4_cpufreq_nb); + return cpufreq_register_driver(&exynos4_driver); out: |