summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_optidma.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_optidma.c')
-rw-r--r--drivers/ata/pata_optidma.c32
1 files changed, 16 insertions, 16 deletions
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 74d2e7a28da0..067fca1fa8a1 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -91,12 +91,12 @@ static void optidma_error_handler(struct ata_port *ap)
static void optidma_unlock(struct ata_port *ap)
{
- unsigned long regio = ap->ioaddr.cmd_addr;
+ void __iomem *regio = ap->ioaddr.cmd_addr;
/* These 3 unlock the control register access */
- inw(regio + 1);
- inw(regio + 1);
- outb(3, regio + 2);
+ ioread16(regio + 1);
+ ioread16(regio + 1);
+ iowrite8(3, regio + 2);
}
/**
@@ -108,10 +108,10 @@ static void optidma_unlock(struct ata_port *ap)
static void optidma_lock(struct ata_port *ap)
{
- unsigned long regio = ap->ioaddr.cmd_addr;
+ void __iomem *regio = ap->ioaddr.cmd_addr;
/* Relock */
- outb(0x83, regio + 2);
+ iowrite8(0x83, regio + 2);
}
/**
@@ -133,7 +133,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
struct ata_device *pair = ata_dev_pair(adev);
int pio = adev->pio_mode - XFER_PIO_0;
int dma = adev->dma_mode - XFER_MW_DMA_0;
- unsigned long regio = ap->ioaddr.cmd_addr;
+ void __iomem *regio = ap->ioaddr.cmd_addr;
u8 addr;
/* Address table precomputed with a DCLK of 2 */
@@ -178,20 +178,20 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
/* Commence primary programming sequence */
/* First we load the device number into the timing select */
- outb(adev->devno, regio + MISC_REG);
+ iowrite8(adev->devno, regio + MISC_REG);
/* Now we load the data timings into read data/write data */
if (mode < XFER_MW_DMA_0) {
- outb(data_rec_timing[pci_clock][pio], regio + READ_REG);
- outb(data_rec_timing[pci_clock][pio], regio + WRITE_REG);
+ iowrite8(data_rec_timing[pci_clock][pio], regio + READ_REG);
+ iowrite8(data_rec_timing[pci_clock][pio], regio + WRITE_REG);
} else if (mode < XFER_UDMA_0) {
- outb(dma_data_rec_timing[pci_clock][dma], regio + READ_REG);
- outb(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG);
+ iowrite8(dma_data_rec_timing[pci_clock][dma], regio + READ_REG);
+ iowrite8(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG);
}
/* Finally we load the address setup into the misc register */
- outb(addr | adev->devno, regio + MISC_REG);
+ iowrite8(addr | adev->devno, regio + MISC_REG);
/* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */
- outb(0x85, regio + CNTRL_REG);
+ iowrite8(0x85, regio + CNTRL_REG);
/* Switch back to IDE mode */
optidma_lock(ap);
@@ -389,7 +389,7 @@ static struct ata_port_operations optidma_port_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -422,7 +422,7 @@ static struct ata_port_operations optiplus_port_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,