summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/configs/omap3_evm_defconfig1528
-rw-r--r--arch/arm/configs/omap_4430sdp_defconfig806
-rw-r--r--arch/arm/configs/omap_zoom2_defconfig1211
-rw-r--r--arch/arm/configs/rx51_defconfig2
-rw-r--r--arch/arm/mach-omap1/Kconfig1
-rw-r--r--arch/arm/mach-omap1/Makefile4
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c13
-rw-r--r--arch/arm/mach-omap1/clock.c2
-rw-r--r--arch/arm/mach-omap1/pm.c11
-rw-r--r--arch/arm/mach-omap1/pm.h (renamed from arch/arm/plat-omap/include/mach/pm.h)85
-rw-r--r--arch/arm/mach-omap1/serial.c3
-rw-r--r--arch/arm/mach-omap1/sleep.S2
-rw-r--r--arch/arm/mach-omap2/Kconfig14
-rw-r--r--arch/arm/mach-omap2/Makefile30
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c114
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c87
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c94
-rw-r--r--arch/arm/mach-omap2/board-ldp.c219
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c108
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c329
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c197
-rw-r--r--arch/arm/mach-omap2/board-overo.c79
-rw-r--r--arch/arm/mach-omap2/board-rx51-peripherals.c232
-rw-r--r--arch/arm/mach-omap2/board-zoom-debugboard.c160
-rw-r--r--arch/arm/mach-omap2/board-zoom2.c110
-rw-r--r--arch/arm/mach-omap2/clock.c18
-rw-r--r--arch/arm/mach-omap2/clock24xx.c23
-rw-r--r--arch/arm/mach-omap2/clock24xx.h11
-rw-r--r--arch/arm/mach-omap2/clock34xx.c23
-rw-r--r--arch/arm/mach-omap2/clock34xx.h35
-rw-r--r--arch/arm/mach-omap2/clockdomains.h2
-rw-r--r--arch/arm/mach-omap2/cm-regbits-34xx.h14
-rw-r--r--arch/arm/mach-omap2/cm.h6
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c330
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.c189
-rw-r--r--arch/arm/mach-omap2/gpmc.c6
-rw-r--r--arch/arm/mach-omap2/id.c8
-rw-r--r--arch/arm/mach-omap2/io.c52
-rw-r--r--arch/arm/mach-omap2/irq.c18
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.c280
-rw-r--r--arch/arm/mach-omap2/mmc-twl4030.h3
-rw-r--r--arch/arm/mach-omap2/pm-debug.c152
-rw-r--r--arch/arm/mach-omap2/pm.c111
-rw-r--r--arch/arm/mach-omap2/pm.h38
-rw-r--r--arch/arm/mach-omap2/pm24xx.c549
-rw-r--r--arch/arm/mach-omap2/pm34xx.c710
-rw-r--r--arch/arm/mach-omap2/prcm-common.h2
-rw-r--r--arch/arm/mach-omap2/prm.h207
-rw-r--r--arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h55
-rw-r--r--arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h54
-rw-r--r--arch/arm/mach-omap2/sdrc.c24
-rw-r--r--arch/arm/mach-omap2/sdrc2xxx.c5
-rw-r--r--arch/arm/mach-omap2/serial.c465
-rw-r--r--arch/arm/mach-omap2/sleep24xx.S1
-rw-r--r--arch/arm/mach-omap2/sleep34xx.S436
-rw-r--r--arch/arm/mach-omap2/sram242x.S10
-rw-r--r--arch/arm/mach-omap2/sram243x.S10
-rw-r--r--arch/arm/mach-omap2/sram34xx.S129
-rw-r--r--arch/arm/mach-omap2/timer-gp.c9
-rw-r--r--arch/arm/mach-omap2/usb-musb.c21
-rw-r--r--arch/arm/plat-omap/Kconfig13
-rw-r--r--arch/arm/plat-omap/clock.c37
-rw-r--r--arch/arm/plat-omap/common.c114
-rw-r--r--arch/arm/plat-omap/devices.c2
-rw-r--r--arch/arm/plat-omap/dma.c102
-rw-r--r--arch/arm/plat-omap/dmtimer.c73
-rw-r--r--arch/arm/plat-omap/gpio.c134
-rw-r--r--arch/arm/plat-omap/i2c.c2
-rw-r--r--arch/arm/plat-omap/include/mach/clock.h10
-rw-r--r--arch/arm/plat-omap/include/mach/common.h3
-rw-r--r--arch/arm/plat-omap/include/mach/control.h20
-rw-r--r--arch/arm/plat-omap/include/mach/cpu.h21
-rw-r--r--arch/arm/plat-omap/include/mach/debug-macro.S2
-rw-r--r--arch/arm/plat-omap/include/mach/dma.h4
-rw-r--r--arch/arm/plat-omap/include/mach/entry-macro.S55
-rw-r--r--arch/arm/plat-omap/include/mach/gpmc-smc91x.h42
-rw-r--r--arch/arm/plat-omap/include/mach/hardware.h1
-rw-r--r--arch/arm/plat-omap/include/mach/hwa742.h4
-rw-r--r--arch/arm/plat-omap/include/mach/io.h37
-rw-r--r--arch/arm/plat-omap/include/mach/irqs.h90
-rw-r--r--arch/arm/plat-omap/include/mach/keypad.h4
-rw-r--r--arch/arm/plat-omap/include/mach/memory.h3
-rw-r--r--arch/arm/plat-omap/include/mach/omap24xx.h18
-rw-r--r--arch/arm/plat-omap/include/mach/omap34xx.h13
-rw-r--r--arch/arm/plat-omap/include/mach/omap44xx.h46
-rw-r--r--arch/arm/plat-omap/include/mach/onenand.h22
-rw-r--r--arch/arm/plat-omap/include/mach/serial.h25
-rw-r--r--arch/arm/plat-omap/include/mach/sram.h6
-rw-r--r--arch/arm/plat-omap/include/mach/usb.h6
-rw-r--r--arch/arm/plat-omap/include/mach/vmalloc.h2
-rw-r--r--arch/arm/plat-omap/io.c29
-rw-r--r--arch/arm/plat-omap/mcbsp.c30
-rw-r--r--arch/arm/plat-omap/mux.c3
-rw-r--r--arch/arm/plat-omap/sram.c66
95 files changed, 9389 insertions, 1098 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b6b9f6ee467b..e8ab87750e9b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -138,6 +138,7 @@ machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
machine-$(CONFIG_ARCH_OMAP3) := omap2
+machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PXA) := pxa
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
new file mode 100644
index 000000000000..28be17fbc157
--- /dev/null
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -0,0 +1,1528 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
new file mode 100644
index 000000000000..67a3a770cc2f
--- /dev/null
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -0,0 +1,806 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29
+# Fri April 19 19:58:24 20089
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
new file mode 100644
index 000000000000..213fe9c5eaae
--- /dev/null
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -0,0 +1,1211 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da8cd7..eb2cb31825c0 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89c5fad..55ecc01ea206 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@ config MACH_OMAP_H2
config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
-# select GPIOEXPANDER_OMAP
help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5d7546..6867cd3ad0b4 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
+mailbox_mach-objs := mailbox.o
+
led-y := leds.o
# Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed1365319e..e70fc7c66bbb 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
#include <mach/common.h>
#include <mach/dsp_common.h>
#include <mach/omapfb.h>
+#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
@@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
},
};
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+ .te_connected = 1,
+};
+
+static void hwa742_dev_init(void)
+{
+ clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+ omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
/* assume no Mini-AB port */
@@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap_dsp_init();
+ hwa742_dev_init();
ads7846_dev_init();
mipid_dev_init();
omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 336e51dc6127..436eed22801b 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -776,7 +776,7 @@ int __init omap1_clk_init(void)
arm_idlect1_mask = ~0;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 9774c1f5311e..5218943c91c0 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -53,11 +53,12 @@
#include <mach/clock.h>
#include <mach/sram.h>
#include <mach/tc.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/dma.h>
#include <mach/dmtimer.h>
+#include "pm.h"
+
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
@@ -101,7 +102,7 @@ static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
* going idle we continue to do idle even if we get
* a clock tick interrupt . .
*/
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
{
extern __u32 arm_idlect1_mask;
__u32 use_idlect1 = arm_idlect1_mask;
@@ -222,7 +223,7 @@ static void omap_pm_wakeup_setup(void)
#define EN_APICK 6 /* ARM_IDLECT2 */
#define DSP_EN 1 /* ARM_RSTCT1 */
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
{
unsigned long arg0 = 0, arg1 = 0;
@@ -610,7 +611,7 @@ static int omap_pm_enter(suspend_state_t state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
- omap_pm_suspend();
+ omap1_pm_suspend();
break;
default:
return -EINVAL;
@@ -683,7 +684,7 @@ static int __init omap_pm_init(void)
return -ENODEV;
}
- pm_idle = omap_pm_idle;
+ pm_idle = omap1_pm_idle;
if (cpu_is_omap730())
setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/mach-omap1/pm.h
index ce6ee7927537..9ed5e2c1de4d 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -1,7 +1,7 @@
/*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
*
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
*
* Author: MontaVista Software, Inc.
* support@mvista.com
@@ -31,8 +31,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
/*
* ----------------------------------------------------------------------------
@@ -106,8 +106,7 @@
#if !defined(CONFIG_ARCH_OMAP730) && \
!defined(CONFIG_ARCH_OMAP15XX) && \
- !defined(CONFIG_ARCH_OMAP16XX) && \
- !defined(CONFIG_ARCH_OMAP24XX)
+ !defined(CONFIG_ARCH_OMAP16XX)
#warning "Power management for this processor not implemented yet"
#endif
@@ -115,29 +114,27 @@
#include <linux/clk.h>
+extern struct kset power_subsys;
+
extern void prevent_idle_sleep(void);
extern void allow_idle_sleep(void);
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
- void __iomem *sdrc_power);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
extern unsigned int omap730_cpu_suspend_sz;
extern unsigned int omap1510_cpu_suspend_sz;
extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap730_idle_loop_suspend_sz;
extern unsigned int omap1510_idle_loop_suspend_sz;
extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
#ifdef CONFIG_OMAP_SERIAL_WAKE
extern void omap_serial_wake_trigger(int enable);
@@ -170,10 +167,6 @@ extern void omap_serial_wake_trigger(int enable);
#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
/*
* List of global OMAP registers to preserve.
* More ones like CP and general purpose register values are preserved
@@ -283,63 +276,5 @@ enum mpui1610_save_state {
#endif
};
-enum omap24xx_save_state {
- OMAP24XX_SLEEP_SAVE_START = 0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR1,
- OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
- OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_OE,
- OMAP24XX_SLEEP_SAVE_GPIO4_OE,
- OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
- OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
- OMAP24XX_SLEEP_SAVE_SIZE
-};
-
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 842090b148f1..f754cee4f3c3 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -26,9 +26,6 @@
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
static struct clk * uart1_ck;
static struct clk * uart2_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f3eac932092d..22e8568339b0 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -35,7 +35,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
.text
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 64ab386a65c7..a755eb5e2361 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,7 +25,7 @@ config ARCH_OMAP3430
select ARCH_OMAP_OTG
comment "OMAP Board Type"
- depends on ARCH_OMAP2 || ARCH_OMAP3
+ depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
@@ -56,6 +56,10 @@ config MACH_OVERO
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_OMAP3EVM
+ bool "OMAP 3530 EVM board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -67,3 +71,11 @@ config MACH_OMAP_3430SDP
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+ bool "OMAP3 Zoom2 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+ bool "OMAP 4430 SDP board"
+ depends on ARCH_OMAP4
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 88629a7455a6..6226e64d99a1 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,14 @@
#
# Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
- devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
- clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common = irq.o sdrc.o
+prcm-common = prcm.o powerdomain.o
+clock-common = clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -20,8 +25,10 @@ obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# Clock framework
@@ -45,6 +52,8 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
+ mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
@@ -53,8 +62,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
+ mmc-twl4030.o \
+ board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
obj-y += usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
+obj-y += $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
+obj-y += $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 22143651037e..9c3fdcdf76c3 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
#define SDP2430_CS0_BASE 0x04000000
-#define SDP2430_FLASH_CS 0
-#define SDP2430_SMC91X_CS 5
-
-#define SDP2430_ETHR_GPIO_IRQ 149
+#define SECONDARY_LCD_GPIO 147
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
.resource = &sdp2430_flash_resource,
};
-static struct resource sdp2430_smc91x_resources[] = {
- [0] = {
- .start = SDP2430_CS0_BASE,
- .end = SDP2430_CS0_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp2430_smc91x_device = {
- .name = "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+ .name = "sdp2430_lcd",
.id = -1,
- .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources),
- .resource = sdp2430_smc91x_resources,
};
static struct platform_device *sdp2430_devices[] __initdata = {
- &sdp2430_smc91x_device,
&sdp2430_flash_device,
+ &sdp2430_lcd_device,
};
-static inline void __init sdp2430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- unsigned int rate;
- struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
- eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck)) {
- WARN_ON(1);
- return;
- }
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 5,
+ .gpio_irq = 149,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
- clk_enable(gpmc_fck);
- rate = clk_get_rate(gpmc_fck);
-
- /* Make sure CS1 timings are correct, for 2430 always muxed */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
- if (rate >= 160000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else if (rate >= 130000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else { /* rate = 100000000 */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
- }
+};
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- goto out;
- }
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
- sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
+ gpmc_smc91x_init(&board_smc91x_data);
+}
- if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- SDP2430_ETHR_GPIO_IRQ);
- gpmc_cs_free(eth_cs);
- goto out;
- }
- gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
-out:
- clk_disable(gpmc_fck);
- clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
}
+#endif
+
static void __init omap_2430sdp_init_irq(void)
{
omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
- sdp2430_init_smc91x();
}
static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
+ {OMAP_TAG_LCD, &sdp2430_lcd_config},
};
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
static void __init omap_2430sdp_init(void)
{
+ int ret;
+
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
omap_serial_init();
twl4030_mmc_init(mmc);
usb_musb_init();
+ board_smc91x_init();
+
+ /* Turn off secondary LCD backlight */
+ ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+ if (ret == 0)
+ gpio_direction_output(SECONDARY_LCD_GPIO, 0);
}
static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed9274972122..496a90e4ea7a 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,13 @@
#include <mach/control.h>
#include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
+#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
#define CONFIG_DISABLE_HFCLK 1
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6
-#define SDP3430_SMC91X_CS 3
-
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
#define SDP3430_TS_GPIO_IRQ_SDPV2 2
@@ -56,24 +54,6 @@
#define TWL4030_MSECURE_GPIO 22
-static struct resource sdp3430_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp3430_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources),
- .resource = sdp3430_smc91x_resources,
-};
-
static int sdp3430_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -184,48 +164,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
};
static struct platform_device *sdp3430_devices[] __initdata = {
- &sdp3430_smc91x_device,
&sdp3430_lcd_device,
};
-static inline void __init sdp3430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- int eth_gpio = 0;
-
- eth_cs = SDP3430_SMC91X_CS;
-
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
-
- if (omap_rev() > OMAP3430_REV_ES1_0)
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
- else
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
- sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
- if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- eth_gpio);
- return;
- }
- gpio_direction_input(eth_gpio);
-}
-
static void __init omap_3430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(hyb18m512160af6_sdrc_params);
omap_init_irq();
omap_gpio_init();
- sdp3430_init_smc91x();
}
static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +452,32 @@ static int __init omap3430_i2c_init(void)
return 0;
}
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 3,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
@@ -522,6 +494,7 @@ static void __init omap_3430sdp_init(void)
ads7846_dev_init();
omap_serial_init();
usb_musb_init();
+ board_smc91x_init();
}
static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
new file mode 100644
index 000000000000..57e477bd89c6
--- /dev/null
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -0,0 +1,94 @@
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+ .name = "sdp4430_lcd",
+ .id = -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+ &sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+ { OMAP_TAG_UART, &sdp4430_uart_config },
+ { OMAP_TAG_LCD, &sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+ gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(1);
+#endif
+ gic_init_irq();
+ omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+ platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+ omap_board_config = sdp4430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+ omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+ /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_4430sdp_map_io,
+ .init_irq = omap_4430sdp_init_irq,
+ .init_machine = omap_4430sdp_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index da57b0fcda14..d8bc0a7dcb8d 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,11 +16,13 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
@@ -39,6 +41,7 @@
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
#include "mmc-twl4030.h"
@@ -77,8 +80,163 @@ static struct platform_device ldp_smsc911x_device = {
},
};
-static struct platform_device *ldp_devices[] __initdata = {
- &ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(1, 0, KEY_2),
+ KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(2, 1, KEY_6),
+ KEY(3, 1, KEY_F5),
+ KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(3, 2, KEY_F6),
+ KEY(0, 3, KEY_F7),
+ KEY(1, 3, KEY_0),
+ KEY(2, 3, KEY_F8),
+ PERSISTENT_KEY(4, 5),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ 0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+ .rows = 6,
+ .cols = 6,
+ .keymap = ldp_twl4030_keymap,
+ .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap),
+ .rep = 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+ [0] = {
+ .code = KEY_ENTER,
+ .gpio = 101,
+ .desc = "enter sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [1] = {
+ .code = KEY_F1,
+ .gpio = 102,
+ .desc = "func 1",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [2] = {
+ .code = KEY_F2,
+ .gpio = 103,
+ .desc = "func 2",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [3] = {
+ .code = KEY_F3,
+ .gpio = 104,
+ .desc = "func 3",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [4] = {
+ .code = KEY_F4,
+ .gpio = 105,
+ .desc = "func 4",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [5] = {
+ .code = KEY_LEFT,
+ .gpio = 106,
+ .desc = "left sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [6] = {
+ .code = KEY_RIGHT,
+ .gpio = 107,
+ .desc = "right sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [7] = {
+ .code = KEY_UP,
+ .gpio = 108,
+ .desc = "up sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [8] = {
+ .code = KEY_DOWN,
+ .gpio = 109,
+ .desc = "down sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+ .buttons = ldp_gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
+ .rep = 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &ldp_gpio_keys,
+ },
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ts_gpio);
+ omap_set_gpio_debounce(ts_gpio, 1);
+ omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+ [0] = {
+ /*
+ * TSC2046 operates at a max freqency of 2MHz, so
+ * operate slightly below at 1.5MHz
+ */
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &tsc2046_mcspi_config,
+ .irq = 0,
+ .platform_data = &tsc2046_config,
+ },
};
static inline void __init ldp_init_smsc911x(void)
@@ -122,8 +280,22 @@ static struct omap_uart_config ldp_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct platform_device ldp_lcd_device = {
+ .name = "ldp_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
+ { OMAP_TAG_LCD, &ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data ldp_gpio_data = {
@@ -132,12 +304,39 @@ static struct twl4030_gpio_platform_data ldp_gpio_data = {
.irq_end = TWL4030_GPIO_IRQ_END,
};
+static struct twl4030_madc_platform_data ldp_madc_data = {
+ .irq_line = 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vmmc1_supply,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
+ .madc = &ldp_madc_data,
+ .usb = &ldp_usb_data,
+ .vmmc1 = &ldp_vmmc1,
.gpio = &ldp_gpio_data,
+ .keypad = &ldp_kp_twl4030_data,
};
static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
@@ -168,15 +367,29 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
+static struct platform_device *ldp_devices[] __initdata = {
+ &ldp_smsc911x_device,
+ &ldp_lcd_device,
+ &ldp_gpio_keys_device,
+};
+
static void __init omap_ldp_init(void)
{
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
+ ts_gpio = 54;
+ ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+ spi_register_board_info(ldp_spi_board_info,
+ ARRAY_SIZE(ldp_spi_board_info));
+ ads7846_dev_init();
omap_serial_init();
- twl4030_mmc_init(mmc);
usb_musb_init();
+
+ twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ ldp_vmmc1_supply.dev = mmc[0].dev;
}
static void __init omap_ldp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3a7a29d1f9a7..991ac9c38032 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
@@ -105,6 +106,8 @@ static struct platform_device omap3beagle_nand_device = {
.resource = &omap3beagle_nand_resource,
};
+#include "sdram-micron-mt46h32m32lf-6.h"
+
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
@@ -118,6 +121,23 @@ static struct twl4030_hsmmc_info mmc[] = {
{} /* Terminator */
};
+static struct platform_device omap3_beagle_lcd_device = {
+ .name = "omap3beagle_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
@@ -128,6 +148,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ beagle_vmmc1_supply.dev = mmc[0].dev;
+ beagle_vsim_supply.dev = mmc[0].dev;
+
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
@@ -156,12 +180,85 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = {
.setup = beagle_twl_gpio_setup,
};
+static struct regulator_consumer_supply beagle_vdac_supply = {
+ .supply = "vdac",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdvi_supply,
+};
+
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.gpio = &beagle_gpio_data,
+ .vmmc1 = &beagle_vmmc1,
+ .vsim = &beagle_vsim,
+ .vdac = &beagle_vdac,
+ .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
@@ -185,7 +282,7 @@ static int __init omap3_beagle_i2c_init(void)
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
@@ -193,15 +290,6 @@ static void __init omap3_beagle_init_irq(void)
omap_gpio_init();
}
-static struct platform_device omap3_beagle_lcd_device = {
- .name = "omap3beagle_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct gpio_led gpio_leds[] = {
{
.name = "beagleboard::usr0",
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
new file mode 100644
index 000000000000..d3cc145814d0
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -0,0 +1,329 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO 175
+
+#define OMAP3EVM_ETHR_START 0x2c000000
+#define OMAP3EVM_ETHR_SIZE 1024
+#define OMAP3EVM_ETHR_GPIO_IRQ 176
+#define OMAP3EVM_SMC911X_CS 5
+
+static struct resource omap3evm_smc911x_resources[] = {
+ [0] = {
+ .start = OMAP3EVM_ETHR_START,
+ .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources),
+ .resource = &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+ int eth_cs;
+ struct clk *l3ck;
+ unsigned int rate;
+
+ eth_cs = OMAP3EVM_SMC911X_CS;
+
+ l3ck = clk_get(NULL, "l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+ OMAP3EVM_ETHR_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 63,
+ },
+ {} /* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "omap3evm::ledb",
+ /* normally not visible (board underside) */
+ .default_trigger = "default-on",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ omap_cfg_reg(L8_34XX_GPIO63);
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
+
+ /*
+ * Most GPIOs are for USB OTG. Some are mostly sent to
+ * the P2 connector; notably LEDA for the LCD backlight.
+ */
+
+ /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ platform_device_register(&leds_gpio);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .setup = omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = omap3evm_keymap,
+ .keymapsize = ARRAY_SIZE(omap3evm_keymap),
+ .rep = 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .keypad = &omap3evm_kp_data,
+ .madc = &omap3evm_madc_data,
+ .usb = &omap3evm_usb_data,
+ .gpio = &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3evm_twldata,
+ },
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+ ARRAY_SIZE(omap3evm_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+ .name = "omap3evm_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+ gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+ omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+ .platform_data = &ads7846_config,
+ },
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+ omap_gpio_init();
+ omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+ { OMAP_TAG_UART, &omap3_evm_uart_config },
+ { OMAP_TAG_LCD, &omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+ &omap3_evm_lcd_device,
+ &omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+ omap3_evm_i2c_init();
+
+ platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+ omap_board_config = omap3_evm_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+ spi_register_board_info(omap3evm_spi_board_info,
+ ARRAY_SIZE(omap3evm_spi_board_info));
+
+ omap_serial_init();
+ usb_musb_init();
+ ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+ /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_evm_map_io,
+ .init_irq = omap3_evm_init_irq,
+ .init_machine = omap3_evm_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 402f09c6cf10..e32aa23ce962 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -23,7 +23,11 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,11 +39,154 @@
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OMAP3_PANDORA_TS_GPIO 94
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME 127
+
+static struct gpio_led pandora_gpio_leds[] = {
+ {
+ .name = "pandora::sd1",
+ .default_trigger = "mmc0",
+ .gpio = 128,
+ }, {
+ .name = "pandora::sd2",
+ .default_trigger = "mmc1",
+ .gpio = 129,
+ }, {
+ .name = "pandora::bluetooth",
+ .gpio = 158,
+ }, {
+ .name = "pandora::wifi",
+ .gpio = 159,
+ },
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+ .leds = pandora_gpio_leds,
+ .num_leds = ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_led_data,
+ },
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
+{ \
+ .gpio = gpio_num, \
+ .type = ev_type, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \
+ GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+ GPIO_BUTTON_LOW(110, KEY_UP, "up"),
+ GPIO_BUTTON_LOW(103, KEY_DOWN, "down"),
+ GPIO_BUTTON_LOW(96, KEY_LEFT, "left"),
+ GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"),
+ GPIO_BUTTON_LOW(111, BTN_A, "a"),
+ GPIO_BUTTON_LOW(106, BTN_B, "b"),
+ GPIO_BUTTON_LOW(109, BTN_X, "x"),
+ GPIO_BUTTON_LOW(101, BTN_Y, "y"),
+ GPIO_BUTTON_LOW(102, BTN_TL, "l"),
+ GPIO_BUTTON_LOW(97, BTN_TL2, "l2"),
+ GPIO_BUTTON_LOW(105, BTN_TR, "r"),
+ GPIO_BUTTON_LOW(107, BTN_TR2, "r2"),
+ GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"),
+ GPIO_BUTTON_LOW(99, KEY_MENU, "menu"),
+ GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"),
+ GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+ GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+ .buttons = pandora_gpio_keys,
+ .nbuttons = ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_key_info,
+ },
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+ /* set debounce time for GPIO banks 4 and 6 */
+ omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+ omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+ /* col, row, code */
+ KEY(0, 0, KEY_9),
+ KEY(0, 1, KEY_0),
+ KEY(0, 2, KEY_BACKSPACE),
+ KEY(0, 3, KEY_O),
+ KEY(0, 4, KEY_P),
+ KEY(0, 5, KEY_K),
+ KEY(0, 6, KEY_L),
+ KEY(0, 7, KEY_ENTER),
+ KEY(1, 0, KEY_8),
+ KEY(1, 1, KEY_7),
+ KEY(1, 2, KEY_6),
+ KEY(1, 3, KEY_5),
+ KEY(1, 4, KEY_4),
+ KEY(1, 5, KEY_3),
+ KEY(1, 6, KEY_2),
+ KEY(1, 7, KEY_1),
+ KEY(2, 0, KEY_I),
+ KEY(2, 1, KEY_U),
+ KEY(2, 2, KEY_Y),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_R),
+ KEY(2, 5, KEY_E),
+ KEY(2, 6, KEY_W),
+ KEY(2, 7, KEY_Q),
+ KEY(3, 0, KEY_J),
+ KEY(3, 1, KEY_H),
+ KEY(3, 2, KEY_G),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_D),
+ KEY(3, 5, KEY_S),
+ KEY(3, 6, KEY_A),
+ KEY(3, 7, KEY_LEFTSHIFT),
+ KEY(4, 0, KEY_N),
+ KEY(4, 1, KEY_B),
+ KEY(4, 2, KEY_V),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_X),
+ KEY(4, 5, KEY_Z),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 7, KEY_COMMA),
+ KEY(5, 0, KEY_M),
+ KEY(5, 1, KEY_SPACE),
+ KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+ .rows = 8,
+ .cols = 6,
+ .keymap = pandora_keypad_map,
+ .keymapsize = ARRAY_SIZE(pandora_keypad_map),
+ .rep = 1,
+};
+
static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
@@ -69,6 +216,14 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
.enabled_uarts = (1 << 2), /* UART3 */
};
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -77,6 +232,10 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
omap3pandora_mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(omap3pandora_mmc);
+ /* link regulators to MMC adapters */
+ pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+ pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
return 0;
}
@@ -87,6 +246,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.setup = omap3pandora_twl_gpio_setup,
};
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc2_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -96,6 +285,9 @@ static struct twl4030_platform_data omap3pandora_twldata = {
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
+ .vmmc1 = &pandora_vmmc1,
+ .vmmc2 = &pandora_vmmc2,
+ .keypad = &pandora_kp_data,
};
static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -118,7 +310,7 @@ static int __init omap3pandora_i2c_init(void)
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -188,6 +380,8 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
+ &pandora_leds_gpio,
+ &pandora_keys_gpio,
};
static void __init omap3pandora_init(void)
@@ -201,6 +395,7 @@ static void __init omap3pandora_init(void)
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap3pandora_ads7846_init();
+ pandora_keys_gpio_init();
usb_musb_init();
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b1f23bea863f..dff5528fbfb5 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -27,6 +27,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -45,6 +46,7 @@
#include <mach/nand.h>
#include <mach/usb.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OVERO_GPIO_BT_XGATE 15
@@ -271,21 +273,76 @@ static struct omap_uart_config overo_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .mmc = 2,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .transceiver = true,
+ .ocr_mask = 0x00100000, /* 3.3V */
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ twl4030_mmc_init(mmc);
+
+ overo_vmmc1_supply.dev = mmc[0].dev;
+
+ return 0;
+}
+
static struct twl4030_gpio_platform_data overo_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .setup = overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &overo_vmmc1_supply,
};
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
+ .usb = &overo_usb_data,
+ .vmmc1 = &overo_vmmc1,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
{
- I2C_BOARD_INFO("twl4030", 0x48),
+ I2C_BOARD_INFO("tps65950", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &overo_twldata,
@@ -303,7 +360,7 @@ static int __init overo_i2c_init(void)
static void __init overo_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
@@ -326,23 +383,6 @@ static struct platform_device *overo_devices[] __initdata = {
&overo_lcd_device,
};
-static struct twl4030_hsmmc_info mmc[] __initdata = {
- {
- .mmc = 1,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- {
- .mmc = 2,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .transceiver = true,
- },
- {} /* Terminator */
-};
-
static void __init overo_init(void)
{
overo_i2c_init();
@@ -350,7 +390,6 @@ static void __init overo_init(void)
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap_serial_init();
- twl4030_mmc_init(mmc);
overo_flash_init();
usb_musb_init();
overo_ads7846_init();
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a7381729645c..da93b86234ed 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,30 +27,13 @@
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
-
-#define SMC91X_CS 1
-#define SMC91X_GPIO_IRQ 54
-#define SMC91X_GPIO_RESET 164
-#define SMC91X_GPIO_PWRDWN 86
-
-static struct resource rx51_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device rx51_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(rx51_smc91x_resources),
- .resource = rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3 0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
static int rx51_keymap[] = {
KEY(0, 0, KEY_Q),
@@ -107,98 +90,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
.rep = 1,
};
-static struct platform_device *rx51_peripherals_devices[] = {
- &rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
- struct gpmc_timings t;
- const int t2_r = 45; /* t2 in Figure 12.10 */
- const int t2_w = 30; /* t2 in Figure 12.11 */
- const int t3 = 15; /* t3 in Figure 12.10 */
- const int t5_r = 0; /* t5 in Figure 12.10 */
- const int t6_r = 45; /* t6 in Figure 12.10 */
- const int t6_w = 0; /* t6 in Figure 12.11 */
- const int t7_w = 15; /* t7 in Figure 12.11 */
- const int t15 = 12; /* t15 in Figure 12.2 */
- const int t20 = 185; /* t20 in Figure 12.2 */
-
- memset(&t, 0, sizeof(t));
-
- t.cs_on = t15;
- t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.adv_on = t3; /* Figure 12.10 */
- t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */
- t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */
- t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */
- t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.we_on = t.we_off - t7_w; /* Figure 12.11 */
- t.rd_cycle = t20; /* Figure 12.2 */
- t.wr_cycle = t20; /* Figure 12.4 */
- t.access = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
- return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
- unsigned long cs_mem_base;
- int ret;
-
- omap_cfg_reg(U8_34XX_GPIO54_DOWN);
- omap_cfg_reg(G25_34XX_GPIO86_OUT);
- omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
- if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
- rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
- smc91x_init_gpmc(SMC91X_CS);
-
- if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
- goto free1;
-
- gpio_direction_input(SMC91X_GPIO_IRQ);
- rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
- ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
- if (ret)
- goto free2;
- gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
- ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
- if (ret)
- goto free3;
- gpio_direction_output(SMC91X_GPIO_RESET, 0);
- gpio_set_value(SMC91X_GPIO_RESET, 1);
- msleep(100);
- gpio_set_value(SMC91X_GPIO_RESET, 0);
-
- return;
-
-free3:
- gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
- gpio_free(SMC91X_GPIO_IRQ);
-free1:
- gpmc_cs_free(SMC91X_CS);
-
- printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
@@ -259,7 +150,7 @@ static struct regulator_init_data rx51_vaux2 = {
};
/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
.constraints = {
.name = "VCAM_DIG_18",
.min_uV = 1800000,
@@ -272,6 +163,22 @@ static struct regulator_init_data rx51_vaux3 = {
},
};
+static struct regulator_init_data rx51_vaux3_mmc = {
+ .constraints = {
+ .name = "VMMC2_30",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc2_supply,
+};
+
static struct regulator_init_data rx51_vaux4 = {
.constraints = {
.name = "VCAM_ANA_28",
@@ -382,10 +289,8 @@ static struct twl4030_platform_data rx51_twldata = {
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
- .vaux3 = &rx51_vaux3,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
- .vmmc2 = &rx51_vmmc2,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
};
@@ -401,6 +306,13 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
static int __init rx51_i2c_init(void)
{
+ if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+ system_rev >= SYSTEM_REV_B_USES_VAUX3)
+ rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+ else {
+ rx51_twldata.vaux3 = &rx51_vaux3_cam;
+ rx51_twldata.vmmc2 = &rx51_vmmc2;
+ }
omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
omap_register_i2c_bus(2, 100, NULL, 0);
@@ -408,12 +320,94 @@ static int __init rx51_i2c_init(void)
return 0;
}
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 0x20000,
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x60000,
+ },
+ {
+ .name = "log",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "initfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+ .cs = 0,
+ .gpio_irq = 65,
+ .parts = onenand_partitions,
+ .nr_parts = ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+ gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 1,
+ .gpio_irq = 54,
+ .gpio_pwrdwn = 86,
+ .gpio_reset = 164,
+ .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+ omap_cfg_reg(G25_34XX_GPIO86_OUT);
+ omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
void __init rx51_peripherals_init(void)
{
- platform_add_devices(rx51_peripherals_devices,
- ARRAY_SIZE(rx51_peripherals_devices));
rx51_i2c_init();
- rx51_init_smc91x();
+ board_onenand_init();
+ board_smc91x_init();
}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
new file mode 100644
index 000000000000..bac5c4321ff7
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS 7
+#define ZOOM2_SMSC911X_GPIO 158
+#define ZOOM2_QUADUART_CS 3
+#define ZOOM2_QUADUART_GPIO 102
+#define QUART_CLK 1843200
+#define DEBUG_BASE 0x08000000
+#define ZOOM2_ETHR_START DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+ [0] = {
+ .start = ZOOM2_ETHR_START,
+ .end = ZOOM2_ETHR_START + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources),
+ .resource = zoom2_smsc911x_resources,
+ .dev = {
+ .platform_data = &zoom2_smsc911x_config,
+ },
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ int eth_gpio = 0;
+
+ eth_cs = ZOOM2_SMSC911X_CS;
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+ return;
+ }
+
+ zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+ zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff;
+
+ eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+ zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+ if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+ eth_gpio);
+ return;
+ }
+ gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .mapbase = 0x10000000,
+ .irq = OMAP_GPIO_IRQ(102),
+ .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = QUART_CLK,
+ }, {
+ .flags = 0
+ }
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+ int quart_cs;
+ unsigned long cs_mem_base;
+ int quart_gpio = 0;
+
+ quart_cs = ZOOM2_QUADUART_CS;
+
+ if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem"
+ "for Quad UART(TL16CP754C)\n");
+ return;
+ }
+
+ quart_gpio = ZOOM2_QUADUART_GPIO;
+
+ if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+ quart_gpio);
+ return;
+ }
+ gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+ int debug_board_detect = 0;
+
+ debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+ if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+ "board detect\n", debug_board_detect);
+ return 0;
+ }
+ gpio_direction_input(debug_board_detect);
+
+ if (!gpio_get_value(debug_board_detect)) {
+ gpio_free(debug_board_detect);
+ return 0;
+ }
+ return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+ &zoom2_smsc911x_device,
+ &zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+ if (!omap_zoom2_debugboard_detect())
+ return 0;
+
+ zoom2_init_smsc911x();
+ zoom2_init_quaduart();
+ return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
new file mode 100644
index 000000000000..bcc0f7632dea
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+ { OMAP_TAG_UART, &zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &zoom2_twldata,
+ },
+};
+
+static int __init omap_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+ ARRAY_SIZE(zoom2_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+ omap_i2c_init();
+ omap_board_config = zoom2_config;
+ omap_board_config_size = ARRAY_SIZE(zoom2_config);
+ omap_serial_init();
+ omap_zoom2_debugboard_init();
+ twl4030_mmc_init(mmc);
+ usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_zoom2_map_io,
+ .init_irq = omap_zoom2_init_irq,
+ .init_machine = omap_zoom2_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 4247a1534411..ba528f85749c 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -91,9 +91,9 @@ static void _omap2xxx_clk_commit(struct clk *clk)
return;
prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
/* OCP barrier */
- prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
}
/*
@@ -547,8 +547,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
const struct clksel_rate *clkr;
u32 last_div = 0;
- printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk->name, target_rate);
+ pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+ clk->name, target_rate);
*new_div = 1;
@@ -562,7 +562,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
/* Sanity check */
if (clkr->div <= last_div)
- printk(KERN_ERR "clock: clksel_rate table not sorted "
+ pr_err("clock: clksel_rate table not sorted "
"for clock %s", clk->name);
last_div = clkr->div;
@@ -574,7 +574,7 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
}
if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find divisor for target "
+ pr_err("clock: Could not find divisor for target "
"rate %ld for clock %s parent %s\n", target_rate,
clk->name, clk->parent->name);
return ~0;
@@ -582,8 +582,8 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
*new_div = clkr->div;
- printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
- (clk->parent->rate / clkr->div));
+ pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+ (clk->parent->rate / clkr->div));
return (clk->parent->rate / clkr->div);
}
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)
if ((regval32 & (1 << clk->enable_bit)) == v)
return;
- printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+ printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
if (cpu_is_omap34xx()) {
omap2_clk_enable(clk);
omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e4cef333e291..44de0271fc2f 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -233,6 +233,8 @@ static struct prcm_config *curr_prcm_set;
static struct clk *vclk;
static struct clk *sclk;
+static void __iomem *prcm_clksrc_ctrl;
+
/*-------------------------------------------------------------------------
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
@@ -269,10 +271,9 @@ static int omap2_enable_osc_ck(struct clk *clk)
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
return 0;
}
@@ -281,10 +282,9 @@ static void omap2_disable_osc_ck(struct clk *clk)
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
static const struct clkops clkops_oscck = {
@@ -654,7 +654,7 @@ static u32 omap2_get_sysclkdiv(void)
{
u32 div;
- div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ div = __raw_readl(prcm_clksrc_ctrl);
div &= OMAP_SYSCLKDIV_MASK;
div >>= OMAP_SYSCLKDIV_SHIFT;
@@ -714,15 +714,18 @@ int __init omap2_clk_init(void)
struct omap_clk *c;
u32 clkrate;
- if (cpu_is_omap242x())
+ if (cpu_is_omap242x()) {
+ prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_242X;
- else if (cpu_is_omap2430())
+ } else if (cpu_is_omap2430()) {
+ prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_243X;
+ }
clk_init(&omap2_clk_functions);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 88c5acb40fcf..458f00cdcbea 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -24,6 +24,17 @@
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
static unsigned long omap2_table_mpu_recalc(struct clk *clk);
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ba05aa42bd8e..9e43fe5209d3 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -129,6 +129,9 @@ static struct omap_clk omap34xx_clks[] = {
CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2),
CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2),
CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
+ CLK(NULL, "modem_fck", &modem_fck, CK_343X),
+ CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X),
+ CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X),
CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X),
CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X),
CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2),
@@ -281,6 +284,8 @@ static struct omap_clk omap34xx_clks[] = {
#define MAX_DPLL_WAIT_TRIES 1000000
+#define MIN_SDRC_DLL_LOCK_FREQ 83000000
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
@@ -703,6 +708,7 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
{
u32 new_div = 0;
+ u32 unlock_dll = 0;
unsigned long validrate, sdrcrate;
struct omap_sdrc_params *sp;
@@ -729,17 +735,22 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
if (!sp)
return -EINVAL;
- pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
- validrate);
- pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+ if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+ pr_debug("clock: will unlock SDRC DLL\n");
+ unlock_dll = 1;
+ }
+
+ pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+ validrate);
+ pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+ sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
/* REVISIT: SRAM code doesn't support other M2 divisors yet */
WARN_ON(new_div != 1 && new_div != 2);
/* REVISIT: Add SDRC_MR changing to this code also */
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div);
+ sp->actim_ctrlb, new_div, unlock_dll);
return 0;
}
@@ -956,7 +967,7 @@ int __init omap2_clk_init(void)
clk_init(&omap2_clk_functions);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
if (c->cpu & cpu_clkflg) {
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 017a30e9aa1d..e433aec4efdd 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -27,6 +27,8 @@
#include "prm.h"
#include "prm-regbits-34xx.h"
+#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR
+
static unsigned long omap3_dpll_recalc(struct clk *clk);
static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
@@ -1228,6 +1230,37 @@ static struct clk d2d_26m_fck = {
.recalc = &followparent_recalc,
};
+static struct clk modem_fck = {
+ .name = "modem_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &sys_ck,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_MODEM_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+ .name = "sad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_SAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+ .name = "mad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+ .enable_bit = OMAP3430_EN_MAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static const struct clksel omap343x_gpt_clksel[] = {
{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
{ .parent = &sys_ck, .rates = gpt_sys_rates },
@@ -1945,8 +1978,6 @@ static struct clk usb_l4_ick = {
.recalc = &omap2_clksel_recalc,
};
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
/* SECURITY_L4_ICK2 based clocks */
static struct clk security_l4_ick2 = {
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index 281d5da19188..fe319ae4ca0a 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -195,7 +195,7 @@ static struct clockdomain sgx_clkdm = {
static struct clockdomain d2d_clkdm = {
.name = "d2d_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 6f3f5a36aae6..6923deb98a28 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -145,6 +145,8 @@
#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0)
/* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM (1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT 31
/* CM_ICLKEN1_CORE specific bits */
#define OMAP3430_EN_ICR (1 << 29)
@@ -161,6 +163,8 @@
#define OMAP3430_EN_MAILBOXES_SHIFT 7
#define OMAP3430_EN_OMAPCTRL (1 << 6)
#define OMAP3430_EN_OMAPCTRL_SHIFT 6
+#define OMAP3430_EN_SAD2D (1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT 3
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
@@ -176,6 +180,10 @@
#define OMAP3430_EN_DES1 (1 << 0)
#define OMAP3430_EN_DES1_SHIFT 0
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT 3
+#define OMAP3430_EN_MAD2D (1 << 3)
+
/* CM_FCLKEN3_CORE specific bits */
#define OMAP3430ES2_EN_TS_SHIFT 1
#define OMAP3430ES2_EN_TS_MASK (1 << 1)
@@ -231,6 +239,8 @@
#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM (1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT 31
#define OMAP3430ES2_AUTO_MMC3 (1 << 30)
#define OMAP3430ES2_AUTO_MMC3_SHIFT 30
#define OMAP3430ES2_AUTO_ICR (1 << 29)
@@ -287,6 +297,8 @@
#define OMAP3430_AUTO_HSOTGUSB_SHIFT 4
#define OMAP3430ES1_AUTO_D2D (1 << 3)
#define OMAP3430ES1_AUTO_D2D_SHIFT 3
+#define OMAP3430_AUTO_SAD2D (1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT 3
#define OMAP3430_AUTO_SSI (1 << 0)
#define OMAP3430_AUTO_SSI_SHIFT 0
@@ -308,6 +320,8 @@
#define OMAP3430ES2_AUTO_USBTLL (1 << 2)
#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2
#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT 3
+#define OMAP3430_AUTO_MAD2D (1 << 3)
/* CM_CLKSEL_CORE */
#define OMAP3430_CLKSEL_SSI_SHIFT 8
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 65fdf78c91e1..1d3c93bf86d3 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -16,17 +16,12 @@
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global CM registers
@@ -38,6 +33,7 @@
#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 000000000000..2fd22f9c5f0e
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts: Juha Yrjola
+ * Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+ struct gpmc_timings t;
+
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_aavdh = 7;
+ const int t_ce = 76;
+ const int t_aa = 76;
+ const int t_oe = 20;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = 0;
+ t.cs_on = 0;
+ t.adv_on = 0;
+
+ /* Read */
+ t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+ t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+ t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+ t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Write */
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = t.oe_on;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Configure GPMC for asynchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+ int sync_read, int sync_write, int hf)
+{
+ u32 reg;
+
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+ reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+ ONENAND_SYS_CFG1_BL_16;
+ if (sync_read)
+ reg |= ONENAND_SYS_CFG1_SYNC_READ;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+ if (sync_write)
+ reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ if (hf)
+ reg |= ONENAND_SYS_CFG1_HF;
+ else
+ reg &= ~ONENAND_SYS_CFG1_HF;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+ void __iomem *onenand_base,
+ int freq)
+{
+ struct gpmc_timings t;
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+ int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+ int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+ int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+ int err, ticks_cez;
+ int cs = cfg->cs;
+ u32 reg;
+
+ if (cfg->flags & ONENAND_SYNC_READ) {
+ sync_read = 1;
+ } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+ sync_read = 1;
+ sync_write = 1;
+ }
+
+ if (!freq) {
+ /* Very first call freq is not known */
+ err = omap2_onenand_set_async_mode(cs, onenand_base);
+ if (err)
+ return err;
+ reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+ switch ((reg >> 4) & 0xf) {
+ case 0:
+ freq = 40;
+ break;
+ case 1:
+ freq = 54;
+ break;
+ case 2:
+ freq = 66;
+ break;
+ case 3:
+ freq = 83;
+ break;
+ case 4:
+ freq = 104;
+ break;
+ default:
+ freq = 54;
+ break;
+ }
+ first_time = 1;
+ }
+
+ switch (freq) {
+ case 83:
+ min_gpmc_clk_period = 12; /* 83 MHz */
+ t_ces = 5;
+ t_avds = 4;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 9;
+ break;
+ case 66:
+ min_gpmc_clk_period = 15; /* 66 MHz */
+ t_ces = 6;
+ t_avds = 5;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 11;
+ break;
+ default:
+ min_gpmc_clk_period = 18; /* 54 MHz */
+ t_ces = 7;
+ t_avds = 7;
+ t_avdh = 7;
+ t_ach = 9;
+ t_aavdh = 7;
+ t_rdyo = 15;
+ sync_write = 0;
+ break;
+ }
+
+ tick_ns = gpmc_ticks_to_ns(1);
+ div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+ gpmc_clk_ns = gpmc_ticks_to_ns(div);
+ if (gpmc_clk_ns < 15) /* >66Mhz */
+ hf = 1;
+ if (hf)
+ latency = 6;
+ else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+ latency = 3;
+ else
+ latency = 4;
+
+ if (first_time)
+ set_onenand_cfg(onenand_base, latency,
+ sync_read, sync_write, hf);
+
+ if (div == 1) {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg |= (1 << 7);
+ reg |= (1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ } else {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg &= ~(1 << 7);
+ reg &= ~(1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ }
+
+ /* Set synchronous read timings */
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = min_gpmc_clk_period;
+ t.cs_on = 0;
+ t.adv_on = 0;
+ fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+ fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+ t.page_burst_access = gpmc_clk_ns;
+
+ /* Read */
+ t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+ t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+ t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+ t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+ ticks_cez);
+
+ /* Write */
+ if (sync_write) {
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = 0;
+ t.we_off = t.cs_rd_off;
+ t.cs_wr_off = t.cs_rd_off;
+ t.wr_cycle = t.rd_cycle;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+ gpmc_ns_to_ticks(min_gpmc_clk_period +
+ t_rdyo));
+ t.wr_access = t.access;
+ }
+ } else {
+ t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+ t_avdp, t_cer));
+ t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ }
+
+ /* Configure GPMC for synchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_WRAPBURST_SUPP |
+ GPMC_CONFIG1_READMULTIPLE_SUPP |
+ (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+ GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+ GPMC_CONFIG1_PAGE_LEN(2) |
+ (cpu_is_omap34xx() ? 0 :
+ (GPMC_CONFIG1_WAIT_READ_MON |
+ GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_DEVICETYPE_NOR |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+ return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+ struct device *dev = &gpmc_onenand_device.dev;
+
+ /* Set sync timings in GPMC */
+ if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+ freq) < 0) {
+ dev_err(dev, "Unable to set synchronous mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+ gpmc_onenand_data = _onenand_data;
+ gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+ gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+ if (cpu_is_omap24xx() &&
+ (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+ printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+ gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+ gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+ }
+
+ if (platform_device_register(&gpmc_onenand_device) < 0) {
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ return;
+ }
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 000000000000..df99d31d8b64
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact: Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
+ .resource = gpmc_smc91x_resources,
+ .dev = {
+ .platform_data = &gpmc_smc91x_info,
+ },
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+ struct gpmc_timings t;
+ const int t3 = 10; /* Figure 12.2 read and 12.4 write */
+ const int t4_r = 20; /* Figure 12.2 read */
+ const int t4_w = 5; /* Figure 12.4 write */
+ const int t5 = 25; /* Figure 12.2 read */
+ const int t6 = 15; /* Figure 12.2 read */
+ const int t7 = 5; /* Figure 12.4 write */
+ const int t8 = 5; /* Figure 12.4 write */
+ const int t20 = 185; /* Figure 12.2 read and 12.4 write */
+ u32 l;
+
+ memset(&t, 0, sizeof(t));
+
+ /* Read timings */
+ t.cs_on = 0;
+ t.adv_on = t.cs_on;
+ t.oe_on = t.adv_on + t3;
+ t.access = t.oe_on + t5;
+ t.oe_off = t.access;
+ t.adv_rd_off = t.oe_off + max(t4_r, t6);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t20 - t.oe_on;
+
+ /* Write timings */
+ t.we_on = t.adv_on + t3;
+
+ if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+ t.wr_data_mux_bus = t.we_on;
+ t.we_off = t.wr_data_mux_bus + t7;
+ } else
+ t.we_off = t.we_on + t7;
+ if (cpu_is_omap34xx())
+ t.wr_access = t.we_off;
+ t.adv_wr_off = t.we_off + max(t4_w, t8);
+ t.cs_wr_off = t.we_off + t4_w;
+ t.wr_cycle = t20 - t.we_on;
+
+ l = GPMC_CONFIG1_DEVICESIZE_16;
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ l |= GPMC_CONFIG1_MUXADDDATA;
+ if (gpmc_cfg->flags & GPMC_READ_MON)
+ l |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (gpmc_cfg->flags & GPMC_WRITE_MON)
+ l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (gpmc_cfg->wait_pin)
+ l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+ gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+ /*
+ * FIXME: Calculate the address and data bus muxed timings.
+ * Note that at least adv_rd_off needs to be changed according
+ * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+ * FPGA in between smc91x and omap as the timings are different
+ * from above?
+ */
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ return 0;
+
+ return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+ unsigned long cs_mem_base;
+ int ret;
+
+ gpmc_cfg = board_data;
+
+ if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+ gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+ if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+ gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+ gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+ if (gpmc_cfg->retime) {
+ ret = gpmc_cfg->retime();
+ if (ret != 0)
+ goto free1;
+ }
+
+ if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+ goto free1;
+
+ gpio_direction_input(gpmc_cfg->gpio_irq);
+ gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+ if (gpmc_cfg->gpio_pwrdwn) {
+ ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+ if (ret)
+ goto free2;
+ gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+ }
+
+ if (gpmc_cfg->gpio_reset) {
+ ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+ if (ret)
+ goto free3;
+
+ gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+ gpio_set_value(gpmc_cfg->gpio_reset, 1);
+ msleep(100);
+ gpio_set_value(gpmc_cfg->gpio_reset, 0);
+ }
+
+ if (platform_device_register(&gpmc_smc91x_device) < 0) {
+ printk(KERN_ERR "Unable to register smc91x device\n");
+ gpio_free(gpmc_cfg->gpio_reset);
+ goto free3;
+ }
+
+ return;
+
+free3:
+ if (gpmc_cfg->gpio_pwrdwn)
+ gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+ gpio_free(gpmc_cfg->gpio_irq);
+free1:
+ gpmc_cs_free(gpmc_cfg->cs);
+
+ printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 2249049c1d5a..f91934b2b092 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -5,6 +5,9 @@
*
* Author: Juha Yrjola
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -424,6 +427,9 @@ void __init gpmc_init(void)
} else if (cpu_is_omap34xx()) {
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
+ } else if (cpu_is_omap44xx()) {
+ ck = "gpmc_fck";
+ l = OMAP44XX_GPMC_BASE;
}
gpmc_l3_clk = clk_get(NULL, ck);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 34b5914e0f8b..458990e20c60 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -200,7 +203,10 @@ void __init omap2_check_revision(void)
omap24xx_check_revision();
else if (cpu_is_omap34xx())
omap34xx_check_revision();
- else
+ else if (cpu_is_omap44xx()) {
+ printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+ return;
+ } else
pr_err("OMAP revision unknown, please fix!\n");
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 916fcd3a2328..32afd9448216 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -4,12 +4,14 @@
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -30,6 +32,7 @@
#include <mach/sdrc.h>
#include <mach/gpmc.h>
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/powerdomain.h>
@@ -38,7 +41,7 @@
#include <mach/clockdomain.h>
#include "clockdomains.h"
-
+#endif
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
@@ -166,6 +169,46 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
},
};
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_44XX_VIRT,
+ .pfn = __phys_to_pfn(L3_44XX_PHYS),
+ .length = L3_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_44XX_PHYS),
+ .length = L4_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_WK_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
+ .length = L4_WK_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = OMAP44XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+ .length = OMAP44XX_GPMC_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
+ .length = L4_PER_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_EMU_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
+ .length = L4_EMU_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+#endif
void __init omap2_map_common_io(void)
{
@@ -183,6 +226,9 @@ void __init omap2_map_common_io(void)
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
@@ -198,9 +244,11 @@ void __init omap2_map_common_io(void)
void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap2_sdrc_init(sp);
+#endif
gpmc_init();
}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 998c5c45587e..b82863887f10 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -28,7 +28,6 @@
#define INTC_MIR_CLEAR0 0x0088
#define INTC_MIR_SET0 0x008c
#define INTC_PENDING_IRQ0 0x0098
-
/* Number of IRQ state bits in each MIR register */
#define IRQ_BITS_PER_REG 32
@@ -134,7 +133,6 @@ static struct irq_chip omap_irq_chip = {
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
- .disable = omap_mask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
@@ -157,6 +155,22 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
+int omap_irq_pending(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+ struct omap_irq_bank *bank = irq_banks + i;
+ int irq;
+
+ for (irq = 0; irq < bank->nr_irqs; irq += 32)
+ if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+ ((irq >> 5) << 5)))
+ return 1;
+ }
+ return 0;
+}
+
void __init omap_init_irq(void)
{
unsigned long nr_of_irqs = 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index dc40b3e72206..9756a878fd90 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -16,8 +16,8 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <mach/control.h>
@@ -26,31 +26,9 @@
#include "mmc-twl4030.h"
-#if defined(CONFIG_TWL4030_CORE) && \
- (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-#define LDO_CLR 0x00
-#define VSEL_S2_CLR 0x40
-
-#define VMMC1_DEV_GRP 0x27
-#define VMMC1_CLR 0x00
-#define VMMC1_315V 0x03
-#define VMMC1_300V 0x02
-#define VMMC1_285V 0x01
-#define VMMC1_185V 0x00
-#define VMMC1_DEDICATED 0x2A
-
-#define VMMC2_DEV_GRP 0x2B
-#define VMMC2_CLR 0x40
-#define VMMC2_315V 0x0c
-#define VMMC2_300V 0x0b
-#define VMMC2_285V 0x0a
-#define VMMC2_280V 0x09
-#define VMMC2_260V 0x08
-#define VMMC2_185V 0x06
-#define VMMC2_DEDICATED 0x2E
-
-#define VMMC_DEV_GRP_P1 0x20
+#if defined(CONFIG_REGULATOR) && \
+ (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
@@ -59,19 +37,16 @@ static u16 control_devconf1_offset;
static struct twl_mmc_controller {
struct omap_mmc_platform_data *mmc;
- u8 twl_vmmc_dev_grp;
- u8 twl_mmc_dedicated;
- char name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
- {
- .twl_vmmc_dev_grp = VMMC1_DEV_GRP,
- .twl_mmc_dedicated = VMMC1_DEDICATED,
- },
- {
- .twl_vmmc_dev_grp = VMMC2_DEV_GRP,
- .twl_mmc_dedicated = VMMC2_DEDICATED,
- },
-};
+ /* Vcc == configured supply
+ * Vcc_alt == optional
+ * - MMC1, supply for DAT4..DAT7
+ * - MMC2/MMC2, external level shifter voltage supply, for
+ * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+ */
+ struct regulator *vcc;
+ struct regulator *vcc_aux;
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
static int twl_mmc_card_detect(int irq)
{
@@ -117,16 +92,60 @@ static int twl_mmc_late_init(struct device *dev)
int ret = 0;
int i;
- ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
- if (ret)
- goto done;
- ret = gpio_direction_input(mmc->slots[0].switch_pin);
- if (ret)
- goto err;
+ /* MMC/SD/SDIO doesn't require a card detect switch */
+ if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+ ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+ if (ret)
+ goto done;
+ ret = gpio_direction_input(mmc->slots[0].switch_pin);
+ if (ret)
+ goto err;
+ }
+ /* require at least main regulator */
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
if (hsmmc[i].name == mmc->slots[0].name) {
+ struct regulator *reg;
+
hsmmc[i].mmc = mmc;
+
+ reg = regulator_get(dev, "vmmc");
+ if (IS_ERR(reg)) {
+ dev_dbg(dev, "vmmc regulator missing\n");
+ /* HACK: until fixed.c regulator is usable,
+ * we don't require a main regulator
+ * for MMC2 or MMC3
+ */
+ if (i != 0)
+ break;
+ ret = PTR_ERR(reg);
+ goto err;
+ }
+ hsmmc[i].vcc = reg;
+ mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+ /* allow an aux regulator */
+ reg = regulator_get(dev, "vmmc_aux");
+ hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+ /* UGLY HACK: workaround regulator framework bugs.
+ * When the bootloader leaves a supply active, it's
+ * initialized with zero usecount ... and we can't
+ * disable it without first enabling it. Until the
+ * framework is fixed, we need a workaround like this
+ * (which is safe for MMC, but not in general).
+ */
+ if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+ regulator_enable(hsmmc[i].vcc);
+ regulator_disable(hsmmc[i].vcc);
+ }
+ if (hsmmc[i].vcc_aux) {
+ if (regulator_is_enabled(reg) > 0) {
+ regulator_enable(reg);
+ regulator_disable(reg);
+ }
+ }
+
break;
}
}
@@ -173,96 +192,6 @@ static int twl_mmc_resume(struct device *dev, int slot)
#define twl_mmc_resume NULL
#endif
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR (MMC_VDD_165_195 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR (MMC_VDD_165_195 \
- |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
- int ret;
- u8 vmmc = 0, dev_grp_val;
-
- if (!vdd)
- goto doit;
-
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
- /* VMMC1: max 220 mA. And for 8-bit mode,
- * VSIM: max 50 mA
- */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC1_185V;
- /* and VSIM_180V */
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC1_285V;
- /* and VSIM_280V */
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC1_300V;
- /* and VSIM_300V */
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC1_315V;
- /* error if VSIM needed */
- break;
- default:
- return -EINVAL;
- }
- } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
- /* VMMC2: max 100 mA */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC2_185V;
- break;
- case MMC_VDD_25_26:
- case MMC_VDD_26_27:
- vmmc = VMMC2_260V;
- break;
- case MMC_VDD_27_28:
- vmmc = VMMC2_280V;
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC2_285V;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC2_300V;
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC2_315V;
- break;
- default:
- return -EINVAL;
- }
- } else {
- return -EINVAL;
- }
-
-doit:
- if (vdd)
- dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
- else
- dev_grp_val = LDO_CLR; /* Power down */
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- dev_grp_val, c->twl_vmmc_dev_grp);
- if (ret || !vdd)
- return ret;
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- vmmc, c->twl_mmc_dedicated);
-
- return ret;
-}
-
static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
@@ -273,11 +202,13 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+ * card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
+ *
+ * FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
@@ -300,7 +231,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -316,7 +247,7 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, 0);
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
/* 100ms delay required for PBIAS configuration */
msleep(100);
@@ -329,19 +260,33 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
return ret;
}
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
- int ret;
+ int ret = 0;
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /* If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!c->vcc)
+ return 0;
+
/*
- * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+ * Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
* support cards using voltages other than VDDS (1.8V nominal). When a
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ *
+ * In some cases this regulator won't support enable/disable;
+ * e.g. it's a fixed rail for a WLAN chip.
+ *
+ * In other cases vcc_aux switches interface power. Example, for
+ * eMMC cards it represents VccQ. Sometimes transceivers or SDIO
+ * chips/cards need an interface voltage rail too.
*/
if (power_on) {
+ /* only MMC2 supports a CLKIN */
if (mmc->slots[0].internal_clock) {
u32 reg;
@@ -349,24 +294,23 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
+ /* enable interface voltage rail, if needed */
+ if (ret == 0 && c->vcc_aux) {
+ ret = regulator_enable(c->vcc_aux);
+ if (ret < 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
+ }
} else {
- ret = twl_mmc_set_voltage(c, 0);
+ if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+ ret = regulator_disable(c->vcc_aux);
+ if (ret == 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
}
return ret;
}
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- /*
- * Assume MMC3 has self-powered device connected, for example on-board
- * chip with external power source.
- */
- return 0;
-}
-
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -412,10 +356,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
+ mmc->init = twl_mmc_late_init;
- /* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+ /* note: twl4030 card detect GPIOs can disable VMMCx ... */
if (gpio_is_valid(c->gpio_cd)) {
- mmc->init = twl_mmc_late_init;
mmc->cleanup = twl_mmc_cleanup;
mmc->suspend = twl_mmc_suspend;
mmc->resume = twl_mmc_resume;
@@ -439,26 +383,28 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
} else
mmc->slots[0].gpio_wp = -EINVAL;
- /* NOTE: we assume OMAP's MMC1 and MMC2 use
- * the TWL4030's VMMC1 and VMMC2, respectively;
- * and that MMC3 device has it's own power source.
+ /* NOTE: MMC slots should have a Vcc regulator set up.
+ * This may be from a TWL4030-family chip, another
+ * controllable regulator, or a fixed supply.
+ *
+ * temporary HACK: ocr_mask instead of fixed supply
*/
+ mmc->slots[0].ocr_mask = c->ocr_mask;
switch (c->mmc) {
case 1:
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].set_power = twl_mmc1_set_power;
- mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
- mmc->slots[0].set_power = twl_mmc2_set_power;
- if (c->transceiver)
- mmc->slots[0].ocr_mask = MMC2_OCR;
- else
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
- break;
+ if (c->ext_clock)
+ c->transceiver = 1;
+ if (c->transceiver && c->wires > 4)
+ c->wires = 4;
+ /* FALLTHROUGH */
case 3:
- mmc->slots[0].set_power = twl_mmc3_set_power;
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+ /* off-chip level shifting, or none */
+ mmc->slots[0].set_power = twl_mmc23_set_power;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index ea59e8624290..3807c45c9a6c 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -16,9 +16,10 @@ struct twl4030_hsmmc_info {
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
+ int ocr_mask; /* temporary HACK */
};
-#if defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
new file mode 100644
index 000000000000..6cc375a275be
--- /dev/null
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -0,0 +1,152 @@
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+ struct reg {
+ const char *name;
+ u32 val;
+ } regs[32];
+ int reg_count = 0, i;
+ const char *s1 = NULL, *s2 = NULL;
+
+ if (!resume) {
+#if 0
+ /* MPU */
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+ DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+ /* INTC */
+ DUMP_INTC_REG(INTC_MIR0, 0x0084);
+ DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+ DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+ DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+ }
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+ /* DSP */
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+ }
+#endif
+ } else {
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+ if (cpu_is_omap24xx())
+ DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+ DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+ DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+ DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+ DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+ }
+
+ switch (mode) {
+ case 0:
+ s1 = "full";
+ s2 = "retention";
+ break;
+ case 1:
+ s1 = "MPU";
+ s2 = "retention";
+ break;
+ case 2:
+ s1 = "MPU";
+ s2 = "idle";
+ break;
+ }
+
+ if (!resume)
+#ifdef CONFIG_NO_HZ
+ printk(KERN_INFO
+ "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+ jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+ jiffies));
+#else
+ printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+ else
+ printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+ us / 1000, us % 1000);
+
+ for (i = 0; i < reg_count; i++)
+ printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index ea8ceaed09cb..000000000000
--- a/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
- local_irq_disable();
- local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
-
- omap2_sram_idle();
- local_fiq_enable();
- local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
- /* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
- return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
- return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
- int ret = 0;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- ret = omap2_pm_suspend();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void omap2_pm_finish(void)
-{
- pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
- .prepare = omap2_pm_prepare,
- .enter = omap2_pm_enter,
- .finish = omap2_pm_finish,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
- return 0;
-}
-
-__initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
new file mode 100644
index 000000000000..f7b3baf76678
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_debug 0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
new file mode 100644
index 000000000000..db1025562fb0
--- /dev/null
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -0,0 +1,549 @@
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+ u32 f1, f2;
+
+ f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+ f2 &= ~OMAP24XX_EN_UART3;
+
+ if (f1 | f2)
+ return 1;
+ return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+ u32 l;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* There is 1 reference hold for all children of the oscillator
+ * clock, the following will remove it. If no one else uses the
+ * oscillator itself it will be disabled if/when we enter retention
+ * mode.
+ */
+ clk_disable(osc_ck);
+
+ /* Clear old wake-up events */
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Workaround to kill USB */
+ l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+ omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+ omap2_gpio_prepare_for_retention();
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(0, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ /* One last check for pending IRQs to avoid extra latency due
+ * to sleeping unnecessarily. */
+ if (omap_irq_pending())
+ goto no_sleep;
+
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ /* Jump to SRAM suspend code */
+ omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_POWER));
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+
+no_sleep:
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(0, 1, tmp);
+ }
+ omap2_gpio_resume_after_retention();
+
+ clk_enable(osc_ck);
+
+ /* clear CORE wake-up events */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+ /* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+ prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+ /* MPU domain wake events */
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x01)
+ prm_write_mod_reg(0x01, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x20)
+ prm_write_mod_reg(0x20, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+ /* Mask future PRCM-to-MPU interrupts */
+ prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+ u32 l;
+
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+ u32 l;
+
+ /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+ OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+ OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+ return 0;
+ /* Check for UART3. */
+ l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ if (l & OMAP24XX_EN_UART3)
+ return 0;
+ if (sti_console_enabled)
+ return 0;
+
+ return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+ int only_idle = 0;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* Putting MPU into the WFI state while a transfer is active
+ * seems to cause the I2C block to timeout. Why? Good question. */
+ if (omap2_i2c_active())
+ return;
+
+ /* The peripherals seem not to be able to wake up the MPU when
+ * it is in retention mode. */
+ if (omap2_allow_mpu_retention()) {
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /* Try to enter MPU retention */
+ prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+ OMAP_LOGICRETSTATE,
+ MPU_MOD, PM_PWSTCTRL);
+ } else {
+ /* Block MPU retention */
+
+ prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+ only_idle = 1;
+ }
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ omap2_sram_idle();
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+ }
+}
+
+static int omap2_can_sleep(void)
+{
+ if (omap2_fclks_active())
+ return 0;
+ if (osc_ck->usecount > 1)
+ return 0;
+ if (omap_dma_running())
+ return 0;
+
+ return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap2_can_sleep()) {
+ if (omap_irq_pending())
+ goto out;
+ omap2_enter_mpu_retention();
+ goto out;
+ }
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap2_enter_full_retention();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+ /* We cannot sleep in idle until we have resumed */
+ disable_hlt();
+ return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+ u32 wken_wkup, mir1;
+
+ wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+ prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+ /* Mask GPT1 */
+ mir1 = omap_readl(0x480fe0a4);
+ omap_writel(1 << 5, 0x480fe0ac);
+
+ omap_uart_prepare_suspend();
+ omap2_enter_full_retention();
+
+ omap_writel(mir1, 0x480fe0a4);
+ prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+ return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap2_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap2_pm_prepare,
+ .enter = omap2_pm_enter,
+ .finish = omap2_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+ omap2_clkdm_allow_idle(clkdm);
+ return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+ int i, num_mem_banks;
+ struct powerdomain *pwrdm;
+
+ /* Enable autoidle */
+ prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+ OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+ /* Set all domain wakeup dependencies */
+ prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+ if (cpu_is_omap2430())
+ prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+ /*
+ * Set CORE powerdomain memory banks to retain their contents
+ * during RETENTION
+ */
+ num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+ for (i = 0; i < num_mem_banks; i++)
+ pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+ /* Set CORE powerdomain's next power state to RETENTION */
+ pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Force-power down DSP, GFX powerdomains */
+
+ pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(dsp_clkdm);
+
+ pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(gfx_clkdm);
+
+ /* Enable clockdomain hardware-supervised control for all clkdms */
+ clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+ /* Enable clock autoidle for all domains */
+ cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+ OMAP24XX_AUTO_MAILBOXES |
+ OMAP24XX_AUTO_WDT4 |
+ OMAP2420_AUTO_WDT3 |
+ OMAP24XX_AUTO_MSPRO |
+ OMAP2420_AUTO_MMC |
+ OMAP24XX_AUTO_FAC |
+ OMAP2420_AUTO_EAC |
+ OMAP24XX_AUTO_HDQ |
+ OMAP24XX_AUTO_UART2 |
+ OMAP24XX_AUTO_UART1 |
+ OMAP24XX_AUTO_I2C2 |
+ OMAP24XX_AUTO_I2C1 |
+ OMAP24XX_AUTO_MCSPI2 |
+ OMAP24XX_AUTO_MCSPI1 |
+ OMAP24XX_AUTO_MCBSP2 |
+ OMAP24XX_AUTO_MCBSP1 |
+ OMAP24XX_AUTO_GPT12 |
+ OMAP24XX_AUTO_GPT11 |
+ OMAP24XX_AUTO_GPT10 |
+ OMAP24XX_AUTO_GPT9 |
+ OMAP24XX_AUTO_GPT8 |
+ OMAP24XX_AUTO_GPT7 |
+ OMAP24XX_AUTO_GPT6 |
+ OMAP24XX_AUTO_GPT5 |
+ OMAP24XX_AUTO_GPT4 |
+ OMAP24XX_AUTO_GPT3 |
+ OMAP24XX_AUTO_GPT2 |
+ OMAP2420_AUTO_VLYNQ |
+ OMAP24XX_AUTO_DSS,
+ CORE_MOD, CM_AUTOIDLE1);
+ cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+ OMAP24XX_AUTO_SSI |
+ OMAP24XX_AUTO_USB,
+ CORE_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+ OMAP24XX_AUTO_GPMC |
+ OMAP24XX_AUTO_SDMA,
+ CORE_MOD, CM_AUTOIDLE3);
+ cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+ OMAP24XX_AUTO_AES |
+ OMAP24XX_AUTO_RNG |
+ OMAP24XX_AUTO_SHA |
+ OMAP24XX_AUTO_DES,
+ CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+ cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+ /* Put DPLL and both APLLs into autoidle mode */
+ cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+ PLL_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+ OMAP24XX_AUTO_WDT1 |
+ OMAP24XX_AUTO_MPU_WDT |
+ OMAP24XX_AUTO_GPIOS |
+ OMAP24XX_AUTO_32KSYNC |
+ OMAP24XX_AUTO_GPT1,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+ * stabilisation */
+ prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+ /* Configure automatic voltage transition */
+ prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_VOLTSETUP_OFFSET);
+ prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+ (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+ OMAP24XX_MEMRETCTRL |
+ (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+ (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+ OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+ /* Enable wake-up events */
+ prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+ WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+ u32 l;
+
+ if (!cpu_is_omap24xx())
+ return -ENODEV;
+
+ printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+ printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+ /* Look up important powerdomains, clockdomains */
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (!mpu_pwrdm)
+ pr_err("PM: mpu_pwrdm not found\n");
+
+ core_pwrdm = pwrdm_lookup("core_pwrdm");
+ if (!core_pwrdm)
+ pr_err("PM: core_pwrdm not found\n");
+
+ dsp_clkdm = clkdm_lookup("dsp_clkdm");
+ if (!dsp_clkdm)
+ pr_err("PM: mpu_clkdm not found\n");
+
+ gfx_clkdm = clkdm_lookup("gfx_clkdm");
+ if (!gfx_clkdm)
+ pr_err("PM: gfx_clkdm not found\n");
+
+
+ osc_ck = clk_get(NULL, "osc_ck");
+ if (IS_ERR(osc_ck)) {
+ printk(KERN_ERR "could not get osc_ck\n");
+ return -ENODEV;
+ }
+
+ if (cpu_is_omap242x()) {
+ emul_ck = clk_get(NULL, "emul_ck");
+ if (IS_ERR(emul_ck)) {
+ printk(KERN_ERR "could not get emul_ck\n");
+ clk_put(osc_ck);
+ return -ENODEV;
+ }
+ }
+
+ prcm_setup_regs();
+
+ /* Hack to prevent MPU retention when STI console is enabled. */
+ {
+ const struct omap_sti_console_config *sti;
+
+ sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+ struct omap_sti_console_config);
+ if (sti != NULL && sti->enable)
+ sti_console_enabled = 1;
+ }
+
+ /*
+ * We copy the assembler sleep/wakeup routines to SRAM.
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+ if (cpu_is_omap24xx()) {
+ omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+ omap24xx_idle_loop_suspend_sz);
+
+ omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+ omap24xx_cpu_suspend_sz);
+ }
+
+ suspend_set_ops(&omap_pm_ops);
+ pm_idle = omap2_pm_idle;
+
+ return 0;
+}
+
+late_initcall(omap2_pm_init);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
new file mode 100644
index 000000000000..841d4c5ed8be
--- /dev/null
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -0,0 +1,710 @@
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+ struct powerdomain *pwrdm;
+ u32 next_state;
+ u32 saved_state;
+ struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 wkst, irqstatus_mpu;
+ u32 fclk, iclk;
+
+ /* WKUP */
+ wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+ while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ }
+
+ /* CORE */
+ wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+ fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+ prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+ while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+ cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+ }
+ wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+ fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+ while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+ cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ }
+
+ /* PER */
+ wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+ while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+ }
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ /* USBHOST */
+ wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+ PM_WKST);
+ while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ }
+ }
+
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+ cpu_relax();
+
+ return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+ /* Variable to tell what needs to be saved and restored
+ * in omap_sram_idle*/
+ /* save_state = 0 => Nothing to save and restored */
+ /* save_state = 1 => Only L1 and logic lost */
+ /* save_state = 2 => Only L2 lost */
+ /* save_state = 3 => L1, L2 and logic lost */
+ int save_state = 0, mpu_next_state;
+
+ if (!_omap_sram_idle)
+ return;
+
+ mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+ switch (mpu_next_state) {
+ case PWRDM_POWER_RET:
+ /* No need to save context */
+ save_state = 0;
+ break;
+ default:
+ /* Invalid state */
+ printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+ return;
+ }
+ omap2_gpio_prepare_for_retention();
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ _omap_sram_idle(NULL, save_state);
+ cpu_init();
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+ omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+ u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+ fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+ fck_core1 = cm_read_mod_reg(CORE_MOD,
+ CM_FCLKEN1);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ fck_core3 = cm_read_mod_reg(CORE_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+ CM_FCLKEN);
+ fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ } else
+ fck_sgx = cm_read_mod_reg(GFX_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+ CM_FCLKEN);
+ fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+ CM_FCLKEN);
+ fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+ CM_FCLKEN);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+ fck_per &= ~OMAP3430_EN_UART3;
+
+ if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+ fck_cam | fck_per | fck_usbhost)
+ return 1;
+ return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+ if (!omap_uart_can_sleep())
+ return 0;
+ if (omap3_fclks_active())
+ return 0;
+ return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+ u32 cur_state;
+ int sleep_switch = 0;
+ int ret = 0;
+
+ if (pwrdm == NULL || IS_ERR(pwrdm))
+ return -EINVAL;
+
+ while (!(pwrdm->pwrsts & (1 << state))) {
+ if (state == PWRDM_POWER_OFF)
+ return ret;
+ state--;
+ }
+
+ cur_state = pwrdm_read_next_pwrst(pwrdm);
+ if (cur_state == state)
+ return ret;
+
+ if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+ omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+ sleep_switch = 1;
+ pwrdm_wait_transition(pwrdm);
+ }
+
+ ret = pwrdm_set_next_pwrst(pwrdm, state);
+ if (ret) {
+ printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+ pwrdm->name);
+ goto err;
+ }
+
+ if (sleep_switch) {
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+ pwrdm_wait_transition(pwrdm);
+ }
+
+err:
+ return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap3_can_sleep())
+ goto out;
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap_sram_idle();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+ disable_hlt();
+ return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+ struct power_state *pwrst;
+ int state, ret = 0;
+
+ /* Read current next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node)
+ pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+ /* Set ones wanted by suspend */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+ goto restore;
+ if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+ goto restore;
+ }
+
+ omap_uart_prepare_suspend();
+ omap_sram_idle();
+
+restore:
+ /* Restore next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+ if (state > pwrst->next_state) {
+ printk(KERN_INFO "Powerdomain (%s) didn't enter "
+ "target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
+ ret = -1;
+ }
+ }
+ if (ret)
+ printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+ else
+ printk(KERN_INFO "Successfully put all powerdomains "
+ "to target state\n");
+
+ return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap3_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap3_pm_prepare,
+ .enter = omap3_pm_enter,
+ .finish = omap3_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ * retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle. This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+ /* ensure IVA2 clock is disabled */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* if no clock activity, nothing else to do */
+ if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ OMAP3430_CLKACTIVITY_IVA2_MASK))
+ return;
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Enable IVA2 clock */
+ cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+ OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Set IVA2 boot mode to 'idle' */
+ omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+ OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+ /* Un-reset IVA2 */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Disable IVA2 clock */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+ u16 mask, padconf;
+
+ /* In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+ /* reset modem */
+ prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+ CORE_MOD, RM_RSTCTRL);
+ prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+ /* XXX Reset all wkdeps. This should be done when initializing
+ * powerdomains */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+ } else
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+ /*
+ * Enable interface clock autoidle for all modules.
+ * Note that in the long run this should be done by clockfw
+ */
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MODEM |
+ OMAP3430ES2_AUTO_MMC3 |
+ OMAP3430ES2_AUTO_ICR |
+ OMAP3430_AUTO_AES2 |
+ OMAP3430_AUTO_SHA12 |
+ OMAP3430_AUTO_DES2 |
+ OMAP3430_AUTO_MMC2 |
+ OMAP3430_AUTO_MMC1 |
+ OMAP3430_AUTO_MSPRO |
+ OMAP3430_AUTO_HDQ |
+ OMAP3430_AUTO_MCSPI4 |
+ OMAP3430_AUTO_MCSPI3 |
+ OMAP3430_AUTO_MCSPI2 |
+ OMAP3430_AUTO_MCSPI1 |
+ OMAP3430_AUTO_I2C3 |
+ OMAP3430_AUTO_I2C2 |
+ OMAP3430_AUTO_I2C1 |
+ OMAP3430_AUTO_UART2 |
+ OMAP3430_AUTO_UART1 |
+ OMAP3430_AUTO_GPT11 |
+ OMAP3430_AUTO_GPT10 |
+ OMAP3430_AUTO_MCBSP5 |
+ OMAP3430_AUTO_MCBSP1 |
+ OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+ OMAP3430_AUTO_MAILBOXES |
+ OMAP3430_AUTO_OMAPCTRL |
+ OMAP3430ES1_AUTO_FSHOSTUSB |
+ OMAP3430_AUTO_HSOTGUSB |
+ OMAP3430_AUTO_SAD2D |
+ OMAP3430_AUTO_SSI,
+ CORE_MOD, CM_AUTOIDLE1);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_PKA |
+ OMAP3430_AUTO_AES1 |
+ OMAP3430_AUTO_RNG |
+ OMAP3430_AUTO_SHA11 |
+ OMAP3430_AUTO_DES1,
+ CORE_MOD, CM_AUTOIDLE2);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MAD2D |
+ OMAP3430ES2_AUTO_USBTLL,
+ CORE_MOD, CM_AUTOIDLE3);
+ }
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_WDT2 |
+ OMAP3430_AUTO_WDT1 |
+ OMAP3430_AUTO_GPIO1 |
+ OMAP3430_AUTO_32KSYNC |
+ OMAP3430_AUTO_GPT12 |
+ OMAP3430_AUTO_GPT1 ,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_DSS,
+ OMAP3430_DSS_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_CAM,
+ OMAP3430_CAM_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_GPIO6 |
+ OMAP3430_AUTO_GPIO5 |
+ OMAP3430_AUTO_GPIO4 |
+ OMAP3430_AUTO_GPIO3 |
+ OMAP3430_AUTO_GPIO2 |
+ OMAP3430_AUTO_WDT3 |
+ OMAP3430_AUTO_UART3 |
+ OMAP3430_AUTO_GPT9 |
+ OMAP3430_AUTO_GPT8 |
+ OMAP3430_AUTO_GPT7 |
+ OMAP3430_AUTO_GPT6 |
+ OMAP3430_AUTO_GPT5 |
+ OMAP3430_AUTO_GPT4 |
+ OMAP3430_AUTO_GPT3 |
+ OMAP3430_AUTO_GPT2 |
+ OMAP3430_AUTO_MCBSP4 |
+ OMAP3430_AUTO_MCBSP3 |
+ OMAP3430_AUTO_MCBSP2,
+ OMAP3430_PER_MOD,
+ CM_AUTOIDLE);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430ES2_AUTO_USBHOST,
+ OMAP3430ES2_USBHOST_MOD,
+ CM_AUTOIDLE);
+ }
+
+ /*
+ * Set all plls to autoidle. This is needed until autoidle is
+ * enabled by clockfw
+ */
+ cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+ OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+ MPU_MOD,
+ CM_AUTOIDLE2);
+ cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+ (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+ PLL_MOD,
+ CM_AUTOIDLE);
+ cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+ PLL_MOD,
+ CM_AUTOIDLE2);
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+ OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+ OMAP3430_EN_GPT12,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+ /* For some reason IO doesn't generate wakeup event even if
+ * it is selected to mpu wakeup goup */
+ prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+ OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* Don't attach IVA interrupts */
+ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+ /* Clear any pending 'reset' flags */
+ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ omap3_iva_idle();
+ omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+ struct power_state *pwrst;
+
+ if (!pwrdm->pwrsts)
+ return 0;
+
+ pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+ if (!pwrst)
+ return -ENOMEM;
+ pwrst->pwrdm = pwrdm;
+ pwrst->next_state = PWRDM_POWER_RET;
+ list_add(&pwrst->node, &pwrst_list);
+
+ if (pwrdm_has_hdwr_sar(pwrdm))
+ pwrdm_enable_hdwr_sar(pwrdm);
+
+ return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ omap2_clkdm_allow_idle(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+ atomic_read(&clkdm->usecount) == 0)
+ omap2_clkdm_sleep(clkdm);
+ return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+ struct power_state *pwrst, *tmp;
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+ /* XXX prcm_setup_regs needs to be before enabling hw
+ * supervised mode for powerdomains */
+ prcm_setup_regs();
+
+ ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+ (irq_handler_t)prcm_interrupt_handler,
+ IRQF_DISABLED, "prcm", NULL);
+ if (ret) {
+ printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+ INT_34XX_PRCM_MPU_IRQ);
+ goto err1;
+ }
+
+ ret = pwrdm_for_each(pwrdms_setup);
+ if (ret) {
+ printk(KERN_ERR "Failed to setup powerdomains\n");
+ goto err2;
+ }
+
+ (void) clkdm_for_each(clkdms_setup);
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (mpu_pwrdm == NULL) {
+ printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+ goto err2;
+ }
+
+ _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+ omap34xx_cpu_suspend_sz);
+
+ suspend_set_ops(&omap_pm_ops);
+
+ pm_idle = omap3_pm_idle;
+
+err1:
+ return ret;
+err2:
+ free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+ list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+ list_del(&pwrst->node);
+ kfree(pwrst);
+ }
+ return ret;
+}
+
+late_initcall(omap3_pm_init);
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 812d50ee495d..cb1ae84e0925 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -276,6 +276,8 @@
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP3430_EN_GPIO1 (1 << 3)
#define OMAP3430_EN_GPIO1_SHIFT 3
+#define OMAP3430_EN_GPT12 (1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT 1
#define OMAP3430_EN_GPT1 (1 << 0)
#define OMAP3430_EN_GPT1_SHIFT 0
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 826d326b8062..9937e2814696 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -16,17 +16,12 @@
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global PRM registers
@@ -38,80 +33,132 @@
*
*/
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific PRM registers from PRM_BASE + domain offset
@@ -156,9 +203,11 @@
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
new file mode 100644
index 000000000000..02e1c2d4705f
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -0,0 +1,55 @@
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
new file mode 100644
index 000000000000..3751d293cb1f
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -0,0 +1,54 @@
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2a30060cb4b7..2045441e8385 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -37,6 +37,10 @@ static struct omap_sdrc_params *sdrc_init_params;
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT 3
+#define SDRC_POWER_PWDENA_SHIFT 2
+#define SDRC_POWER_PAGEPOLICY_SHIFT 0
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
@@ -56,9 +60,12 @@ struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
{
struct omap_sdrc_params *sp;
+ if (!sdrc_init_params)
+ return NULL;
+
sp = sdrc_init_params;
- while (sp->rate != r)
+ while (sp->rate && sp->rate != r)
sp++;
if (!sp->rate)
@@ -74,7 +81,14 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
omap2_sms_base = omap2_globals->sms;
}
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
{
u32 l;
@@ -90,4 +104,10 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
sdrc_write_reg(l, SDRC_SYSCONFIG);
sdrc_init_params = sp;
+
+ /* XXX Enable SRFRONIDLEREQ here also? */
+ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+ (1 << SDRC_POWER_PWDENA_SHIFT) |
+ (1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+ sdrc_write_reg(l, SDRC_POWER);
}
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0afdad5ae9fb..feaec7eaf6bd 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -99,7 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
m_type = omap2xxx_sdrc_get_type();
local_irq_save(flags);
- __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+ if (cpu_is_omap2420())
+ __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+ else
+ __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
curr_perf_level = level;
local_irq_restore(flags);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 4dcf39c285b9..b094c15bfe47 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -6,8 +6,13 @@
* Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
+ * Major rework for PM support by Kevin Hilman
+ *
* Based off of arch/arm/mach-omap/omap1/serial.c
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -21,9 +26,50 @@
#include <mach/common.h>
#include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER 0x17 /* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+ int num;
+ int can_sleep;
+ struct timer_list timer;
+ u32 timeout;
+
+ void __iomem *wk_st;
+ void __iomem *wk_en;
+ u32 wk_mask;
+ u32 padconf;
+
+ struct clk *ick;
+ struct clk *fck;
+ int clocked;
+
+ struct plat_serial8250_port *p;
+ struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+ int context_valid;
+
+ /* Registers to be saved/restored for OFF-mode */
+ u16 dll;
+ u16 dlh;
+ u16 ier;
+ u16 sysc;
+ u16 scr;
+ u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
static struct plat_serial8250_port serial_platform_data[] = {
{
@@ -74,33 +120,369 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
+ struct plat_serial8250_port *p = uart->p;
+
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
{
- int i;
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- if (uart_ick[i] && uart_fck[i]) {
- if (enable) {
- clk_enable(uart_ick[i]);
- clk_enable(uart_fck[i]);
- } else {
- clk_disable(uart_ick[i]);
- clk_disable(uart_fck[i]);
+ u16 lcr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ lcr = serial_read_reg(p, UART_LCR);
+ serial_write_reg(p, UART_LCR, 0xBF);
+ uart->dll = serial_read_reg(p, UART_DLL);
+ uart->dlh = serial_read_reg(p, UART_DLM);
+ serial_write_reg(p, UART_LCR, lcr);
+ uart->ier = serial_read_reg(p, UART_IER);
+ uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+ uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+ uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+ uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+ u16 efr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ if (!uart->context_valid)
+ return;
+
+ uart->context_valid = 0;
+
+ serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ efr = serial_read_reg(p, UART_EFR);
+ serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, 0x0);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_DLL, uart->dll);
+ serial_write_reg(p, UART_DLM, uart->dlh);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, uart->ier);
+ serial_write_reg(p, UART_FCR, 0xA1);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_EFR, efr);
+ serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+ serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+ serial_write_reg(p, UART_OMAP_WER, uart->wer);
+ serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+ serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+ if (uart->clocked)
+ return;
+
+ clk_enable(uart->ick);
+ clk_enable(uart->fck);
+ uart->clocked = 1;
+ omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_save_context(uart);
+ uart->clocked = 0;
+ clk_disable(uart->ick);
+ clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+ int enable)
+{
+ struct plat_serial8250_port *p = uart->p;
+ u16 sysc;
+
+ sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+ if (enable)
+ sysc |= 0x2 << 3;
+ else
+ sysc |= 0x1 << 3;
+
+ serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+ omap_uart_enable_clocks(uart);
+
+ omap_uart_smart_idle_enable(uart, 0);
+ uart->can_sleep = 0;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_smart_idle_enable(uart, 1);
+ uart->can_sleep = 1;
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+ struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+ omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num && uart->can_sleep) {
+ omap_uart_disable_clocks(uart);
+ return;
+ }
+ }
+}
+
+void omap_uart_resume_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num) {
+ omap_uart_enable_clocks(uart);
+
+ /* Check for IO pad wakeup */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 p = omap_ctrl_readw(uart->padconf);
+
+ if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+ omap_uart_block_sleep(uart);
}
+
+ /* Check for normal UART wakeup */
+ if (__raw_readl(uart->wk_st) & uart->wk_mask)
+ omap_uart_block_sleep(uart);
+
+ return;
}
}
}
+void omap_uart_prepare_suspend(void)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ omap_uart_allow_sleep(uart);
+ }
+}
+
+int omap_uart_can_sleep(void)
+{
+ struct omap_uart_state *uart;
+ int can_sleep = 1;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (!uart->clocked)
+ continue;
+
+ if (!uart->can_sleep) {
+ can_sleep = 0;
+ continue;
+ }
+
+ /* This UART can now safely sleep. */
+ omap_uart_allow_sleep(uart);
+ }
+
+ return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred. It does _nothing_ to handle the interrupt. Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+ struct omap_uart_state *uart = dev_id;
+
+ omap_uart_block_sleep(uart);
+
+ return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+ u32 v;
+ struct plat_serial8250_port *p = uart->p;
+ int ret;
+
+ uart->can_sleep = 0;
+ uart->timeout = sleep_timeout;
+ setup_timer(&uart->timer, omap_uart_idle_timer,
+ (unsigned long) uart);
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ omap_uart_smart_idle_enable(uart, 0);
+
+ if (cpu_is_omap34xx()) {
+ u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+ u32 wk_mask = 0;
+ u32 padconf = 0;
+
+ uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+ uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP3430_ST_UART1_MASK;
+ padconf = 0x182;
+ break;
+ case 1:
+ wk_mask = OMAP3430_ST_UART2_MASK;
+ padconf = 0x17a;
+ break;
+ case 2:
+ wk_mask = OMAP3430_ST_UART3_MASK;
+ padconf = 0x19e;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ uart->padconf = padconf;
+ } else if (cpu_is_omap24xx()) {
+ u32 wk_mask = 0;
+
+ if (cpu_is_omap2430()) {
+ uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ } else if (cpu_is_omap2420()) {
+ uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ }
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP24XX_ST_UART1_MASK;
+ break;
+ case 1:
+ wk_mask = OMAP24XX_ST_UART2_MASK;
+ break;
+ case 2:
+ wk_mask = OMAP24XX_ST_UART3_MASK;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ } else {
+ uart->wk_en = 0;
+ uart->wk_st = 0;
+ uart->wk_mask = 0;
+ uart->padconf = 0;
+ }
+
+ /* Set wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ v = __raw_readl(uart->wk_en);
+ v |= uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are set */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v;
+
+ v = omap_ctrl_readw(uart->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+
+ p->flags |= UPF_SHARE_IRQ;
+ ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+ "serial idle", (void *)uart);
+ WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ struct omap_uart_state *uart;
+ unsigned int value;
+
+ if (sscanf(buf, "%u", &value) != 1) {
+ printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ return -EINVAL;
+ }
+ sleep_timeout = value * HZ;
+ list_for_each_entry(uart, &uart_list, node) {
+ uart->timeout = sleep_timeout;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ /* A zero value means disable timeout feature */
+ omap_uart_block_sleep(uart);
+ }
+ return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+ __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
void __init omap_serial_init(void)
{
- int i;
+ int i, err;
const struct omap_uart_config *info;
char name[16];
@@ -114,9 +496,14 @@ void __init omap_serial_init(void)
if (info == NULL)
return;
+ if (cpu_is_omap44xx()) {
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+ serial_platform_data[i].irq += 32;
+ }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
+ struct omap_uart_state *uart = &omap_uart[i];
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
@@ -125,35 +512,39 @@ void __init omap_serial_init(void)
}
sprintf(name, "uart%d_ick", i+1);
- uart_ick[i] = clk_get(NULL, name);
- if (IS_ERR(uart_ick[i])) {
+ uart->ick = clk_get(NULL, name);
+ if (IS_ERR(uart->ick)) {
printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
- uart_ick[i] = NULL;
- } else
- clk_enable(uart_ick[i]);
+ uart->ick = NULL;
+ }
sprintf(name, "uart%d_fck", i+1);
- uart_fck[i] = clk_get(NULL, name);
- if (IS_ERR(uart_fck[i])) {
+ uart->fck = clk_get(NULL, name);
+ if (IS_ERR(uart->fck)) {
printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
- uart_fck[i] = NULL;
- } else
- clk_enable(uart_fck[i]);
+ uart->fck = NULL;
+ }
- omap_serial_reset(p);
+ if (!uart->ick || !uart->fck)
+ continue;
+
+ uart->num = i;
+ p->private_data = uart;
+ uart->p = p;
+ list_add(&uart->node, &uart_list);
+
+ omap_uart_enable_clocks(uart);
+ omap_uart_reset(uart);
+ omap_uart_idle_init(uart);
}
-}
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
+ err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+ if (!err)
+ err = sysfs_create_file(&serial_device.dev.kobj,
+ &sleep_timeout_attr.attr);
+#endif
-static int __init omap_init(void)
-{
- return platform_device_register(&serial_device);
}
-arch_initcall(omap_init);
+
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index bf9e96105e11..130aadbfa083 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,7 +28,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
#include <mach/omap24xx.h>
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
new file mode 100644
index 000000000000..e5e2553e79a6
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
+ * available */
+#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\
+ OMAP343X_CONTROL_MEM_WKUP +\
+ SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+ .text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+ .word . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ * wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
+loop:
+ /*b loop*/ @Enable to debug by stepping through code
+ /* r0 contains restore pointer in sdram */
+ /* r1 contains information about saving context */
+ ldr r4, sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+
+ cmp r1, #0x0
+ /* If context save is required, do that and execute wfi */
+ bne save_context_wfi
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+restore:
+ /* b restore*/ @ Enable to debug restore code
+ /* Check what was the reason for mpu reset and store the reason in r9*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost - In this case, we wont be here */
+ /* 3 - Both L1 and L2 lost */
+ ldr r1, pm_pwstctrl_mpu
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if target power state was OFF or RET
+ moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
+ movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
+ bne logic_l1_restore
+ /* Execute smi to invalidate L2 cache */
+ mov r12, #0x1 @ set up to invalide L2
+smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+logic_l1_restore:
+ mov r1, #0
+ /* Invalidate all instruction caches to PoU
+ * and flush branch target cache */
+ mcr p15, 0, r1, c7, c5, 0
+
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldmia r3!, {r4-r6}
+ mov sp, r4
+ msr spsr_cxsf, r5
+ mov lr, r6
+
+ ldmia r3!, {r4-r9}
+ /* Coprocessor access Control Register */
+ mcr p15, 0, r4, c1, c0, 2
+
+ /* TTBR0 */
+ MCR p15, 0, r5, c2, c0, 0
+ /* TTBR1 */
+ MCR p15, 0, r6, c2, c0, 1
+ /* Translation table base control register */
+ MCR p15, 0, r7, c2, c0, 2
+ /*domain access Control Register */
+ MCR p15, 0, r8, c3, c0, 0
+ /* data fault status Register */
+ MCR p15, 0, r9, c5, c0, 0
+
+ ldmia r3!,{r4-r8}
+ /* instruction fault status Register */
+ MCR p15, 0, r4, c5, c0, 1
+ /*Data Auxiliary Fault Status Register */
+ MCR p15, 0, r5, c5, c1, 0
+ /*Instruction Auxiliary Fault Status Register*/
+ MCR p15, 0, r6, c5, c1, 1
+ /*Data Fault Address Register */
+ MCR p15, 0, r7, c6, c0, 0
+ /*Instruction Fault Address Register*/
+ MCR p15, 0, r8, c6, c0, 2
+ ldmia r3!,{r4-r7}
+
+ /* user r/w thread and process ID */
+ MCR p15, 0, r4, c13, c0, 2
+ /* user ro thread and process ID */
+ MCR p15, 0, r5, c13, c0, 3
+ /*Privileged only thread and process ID */
+ MCR p15, 0, r6, c13, c0, 4
+ /* cache size selection */
+ MCR p15, 2, r7, c0, c0, 0
+ ldmia r3!,{r4-r8}
+ /* Data TLB lockdown registers */
+ MCR p15, 0, r4, c10, c0, 0
+ /* Instruction TLB lockdown registers */
+ MCR p15, 0, r5, c10, c0, 1
+ /* Secure or Nonsecure Vector Base Address */
+ MCR p15, 0, r6, c12, c0, 0
+ /* FCSE PID */
+ MCR p15, 0, r7, c13, c0, 0
+ /* Context PID */
+ MCR p15, 0, r8, c13, c0, 1
+
+ ldmia r3!,{r4-r5}
+ /* primary memory remap register */
+ MCR p15, 0, r4, c10, c2, 0
+ /*normal memory remap register */
+ MCR p15, 0, r5, c10, c2, 1
+
+ /* Restore cpsr */
+ ldmia r3!,{r4} /*load CPSR from SDRAM*/
+ msr cpsr, r4 /*store cpsr */
+
+ /* Enabling MMU here */
+ mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+ and r7, #0x7
+ cmp r7, #0x0
+ beq usettbr0
+ttbr_error:
+ /* More work needs to be done to support N[0:2] value other than 0
+ * So looping here so that the error can be detected
+ */
+ b ttbr_error
+usettbr0:
+ mrc p15, 0, r2, c2, c0, 0
+ ldr r5, ttbrbit_mask
+ and r2, r5
+ mov r4, pc
+ ldr r5, table_index_mask
+ and r4, r5 /* r4 = 31 to 20 bits of pc */
+ /* Extract the value to be written to table entry */
+ ldr r1, table_entry
+ add r1, r1, r4 /* r1 has value to be written to table entry*/
+ /* Getting the address of table entry to modify */
+ lsr r4, #18
+ add r2, r4 /* r2 has the location which needs to be modified */
+ /* Storing previous entry of location being modified */
+ ldr r5, scratchpad_base
+ ldr r4, [r2]
+ str r4, [r5, #0xC0]
+ /* Modify the table entry */
+ str r1, [r2]
+ /* Storing address of entry being modified
+ * - will be restored after enabling MMU */
+ ldr r5, scratchpad_base
+ str r2, [r5, #0xC4]
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
+ mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
+ mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
+ /* Restore control register but dont enable caches here*/
+ /* Caches will be enabled after restoring MMU table entry */
+ ldmia r3!, {r4}
+ /* Store previous value of control register in scratchpad */
+ str r4, [r5, #0xC8]
+ ldr r2, cache_pred_disable_mask
+ and r4, r2
+ mcr p15, 0, r4, c1, c0, 0
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+save_context_wfi:
+ /*b save_context_wfi*/ @ enable to debug save code
+ mov r8, r0 /* Store SDRAM address in r8 */
+ /* Check what that target sleep state is:stored in r1*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost */
+ /* 3 - Both L1 and L2 lost */
+ cmp r1, #0x2 /* Only L2 lost */
+ beq clean_l2
+ cmp r1, #0x1 /* L2 retained */
+ /* r9 stores whether to clean L2 or not*/
+ moveq r9, #0x0 /* Dont Clean L2 */
+ movne r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+ /* Store sp and spsr to SDRAM */
+ mov r4, sp
+ mrs r5, spsr
+ mov r6, lr
+ stmia r8!, {r4-r6}
+ /* Save all ARM registers */
+ /* Coprocessor access control register */
+ mrc p15, 0, r6, c1, c0, 2
+ stmia r8!, {r6}
+ /* TTBR0, TTBR1 and Translation table base control */
+ mrc p15, 0, r4, c2, c0, 0
+ mrc p15, 0, r5, c2, c0, 1
+ mrc p15, 0, r6, c2, c0, 2
+ stmia r8!, {r4-r6}
+ /* Domain access control register, data fault status register,
+ and instruction fault status register */
+ mrc p15, 0, r4, c3, c0, 0
+ mrc p15, 0, r5, c5, c0, 0
+ mrc p15, 0, r6, c5, c0, 1
+ stmia r8!, {r4-r6}
+ /* Data aux fault status register, instruction aux fault status,
+ datat fault address register and instruction fault address register*/
+ mrc p15, 0, r4, c5, c1, 0
+ mrc p15, 0, r5, c5, c1, 1
+ mrc p15, 0, r6, c6, c0, 0
+ mrc p15, 0, r7, c6, c0, 2
+ stmia r8!, {r4-r7}
+ /* user r/w thread and process ID, user r/o thread and process ID,
+ priv only thread and process ID, cache size selection */
+ mrc p15, 0, r4, c13, c0, 2
+ mrc p15, 0, r5, c13, c0, 3
+ mrc p15, 0, r6, c13, c0, 4
+ mrc p15, 2, r7, c0, c0, 0
+ stmia r8!, {r4-r7}
+ /* Data TLB lockdown, instruction TLB lockdown registers */
+ mrc p15, 0, r5, c10, c0, 0
+ mrc p15, 0, r6, c10, c0, 1
+ stmia r8!, {r5-r6}
+ /* Secure or non secure vector base address, FCSE PID, Context PID*/
+ mrc p15, 0, r4, c12, c0, 0
+ mrc p15, 0, r5, c13, c0, 0
+ mrc p15, 0, r6, c13, c0, 1
+ stmia r8!, {r4-r6}
+ /* Primary remap, normal remap registers */
+ mrc p15, 0, r4, c10, c2, 0
+ mrc p15, 0, r5, c10, c2, 1
+ stmia r8!,{r4-r5}
+
+ /* Store current cpsr*/
+ mrs r2, cpsr
+ stmia r8!, {r2}
+
+ mrc p15, 0, r4, c1, c0, 0
+ /* save control register */
+ stmia r8!, {r4}
+clean_caches:
+ /* Clean Data or unified cache to POU*/
+ /* How to invalidate only L1 cache???? - #FIX_ME# */
+ /* mcr p15, 0, r11, c7, c11, 1 */
+ cmp r9, #1 /* Check whether L2 inval is required or not*/
+ bne skip_l2_inval
+clean_l2:
+ /* read clidr */
+ mrc p15, 1, r0, c0, c0, 1
+ /* extract loc from clidr */
+ ands r3, r0, #0x7000000
+ /* left align loc bit field */
+ mov r3, r3, lsr #23
+ /* if loc is 0, then no need to clean */
+ beq finished
+ /* start clean at cache level 0 */
+ mov r10, #0
+loop1:
+ /* work out 3x current cache level */
+ add r2, r10, r10, lsr #1
+ /* extract cache type bits from clidr*/
+ mov r1, r0, lsr r2
+ /* mask of the bits for current cache only */
+ and r1, r1, #7
+ /* see what cache we have at this level */
+ cmp r1, #2
+ /* skip if no cache, or just i-cache */
+ blt skip
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ /* isb to sych the new cssr&csidr */
+ isb
+ /* read the new csidr */
+ mrc p15, 1, r1, c0, c0, 0
+ /* extract the length of the cache lines */
+ and r2, r1, #7
+ /* add 4 (line length offset) */
+ add r2, r2, #4
+ ldr r4, assoc_mask
+ /* find maximum number on the way size */
+ ands r4, r4, r1, lsr #3
+ /* find bit position of way size increment */
+ clz r5, r4
+ ldr r7, numset_mask
+ /* extract max number of the index size*/
+ ands r7, r7, r1, lsr #13
+loop2:
+ mov r9, r4
+ /* create working copy of max way size*/
+loop3:
+ /* factor way and cache number into r11 */
+ orr r11, r10, r9, lsl r5
+ /* factor index number into r11 */
+ orr r11, r11, r7, lsl r2
+ /*clean & invalidate by set/way */
+ mcr p15, 0, r11, c7, c10, 2
+ /* decrement the way*/
+ subs r9, r9, #1
+ bge loop3
+ /*decrement the index */
+ subs r7, r7, #1
+ bge loop2
+skip:
+ add r10, r10, #2
+ /* increment cache number */
+ cmp r3, r10
+ bgt loop1
+finished:
+ /*swith back to cache level 0 */
+ mov r10, #0
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ isb
+skip_l2_inval:
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+ /* restore regs and return */
+ ldmfd sp!, {r0-r12, pc}
+
+i_dll_wait:
+ ldr r4, clk_stabilize_delay
+
+i_dll_delay:
+ subs r4, r4, #0x1
+ bne i_dll_delay
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+pm_prepwstst_core:
+ .word PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+ .word PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+ .word PM_PWSTCTRL_MPU_P
+scratchpad_base:
+ .word SCRATCHPAD_BASE_P
+sdrc_power:
+ .word SDRC_POWER_V
+context_mem:
+ .word 0x803E3E14
+clk_stabilize_delay:
+ .word 0x000001FF
+assoc_mask:
+ .word 0x3ff
+numset_mask:
+ .word 0x7fff
+ttbrbit_mask:
+ .word 0xFFFFC000
+table_index_mask:
+ .word 0xFFF00000
+table_entry:
+ .word 0x00000C02
+cache_pred_disable_mask:
+ .word 0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+ .word . - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index af4bd3490227..bb299851116d 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -124,11 +124,11 @@ omap242x_sdi_cm_clksel2_pll:
omap242x_sdi_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap242x_sdi_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap242x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_ddr_init_sz)
.word . - omap242x_sram_ddr_init
@@ -220,11 +220,11 @@ omap242x_srs_sdrc_dlla_ctrl:
omap242x_srs_sdrc_rfr_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap242x_srs_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap242x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_reprogram_sdrc_sz)
.word . - omap242x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap242x_ssp_set_config:
- .word OMAP242X_PRCM_CLKCFG_CTRL
+ .word OMAP2420_PRCM_CLKCFG_CTRL
omap242x_ssp_pll_ctl:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap242x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 84363e269e8c..9955abcaeb31 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -124,11 +124,11 @@ omap243x_sdi_cm_clksel2_pll:
omap243x_sdi_sdrc_dlla_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap243x_sdi_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap243x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_ddr_init_sz)
.word . - omap243x_sram_ddr_init
@@ -220,11 +220,11 @@ omap243x_srs_sdrc_dlla_ctrl:
omap243x_srs_sdrc_rfr_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap243x_srs_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap243x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_reprogram_sdrc_sz)
.word . - omap243x_sram_reprogram_sdrc
@@ -305,7 +305,7 @@ wait_dll_lock:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap243x_ssp_set_config:
- .word OMAP243X_PRCM_CLKCFG_CTRL
+ .word OMAP2430_PRCM_CLKCFG_CTRL
omap243x_ssp_pll_ctl:
.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap243x_ssp_pll_stat:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2c7146136342..c080c82521e1 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -40,69 +40,74 @@
/*
* Change frequency of core dpll
* r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ * SDRC rates < 83MHz
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
+ ldr r4, [sp, #52] @ pull extra args off the stack
+ dsb @ flush buffered writes to interconnect
cmp r3, #0x2
blne configure_sdrc
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq unlock_dll
blne lock_dll
- cmp r3, #0x1
- blne unlock_dll
bl sdram_in_selfrefresh @ put the SDRAM in self refresh
bl configure_core_dpll
bl enable_sdrc
- cmp r3, #0x1
- blne wait_dll_unlock
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #0x1
blne configure_sdrc
+ isb @ prevent speculative exec past here
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
unlock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- orr r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ orr r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
lock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- bic r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ bic r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
- mov r5, #0x0 @ Move 0 to R5
- mcr p15, 0, r5, c7, c10, 5 @ memory barrier
- ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
- ldr r5, [r4] @ read the contents of SDRC_POWER
- orr r5, r5, #0x40 @ enable self refresh on idle req
- str r5, [r4] @ write back to SDRC_POWER register
- ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
- ldr r5, [r4]
- bic r5, r5, #0x2 @ disable iclk bit for SRDC
- str r5, [r4]
+ ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
+ ldr r12, [r11] @ read the contents of SDRC_POWER
+ mov r9, r12 @ keep a copy of SDRC_POWER bits
+ orr r12, r12, #0x40 @ enable self refresh on idle req
+ bic r12, r12, #0x4 @ clear PWDENA
+ str r12, [r11] @ write back to SDRC_POWER register
+ ldr r12, [r11] @ posted-write barrier for SDRC
+ ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r12, [r11]
+ bic r12, r12, #0x2 @ disable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2 @ check for SDRC idle
- cmp r5, #2
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2 @ check for SDRC idle
+ cmp r12, #2
bne wait_sdrc_idle
bx lr
configure_core_dpll:
- ldr r4, omap3_cm_clksel1_pll
- ldr r5, [r4]
- ldr r6, core_m2_mask_val @ modify m2 for core dpll
- and r5, r5, r6
- orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
- str r5, [r4]
- mov r5, #0x800 @ wait for the clock to stabilise
+ ldr r11, omap3_cm_clksel1_pll
+ ldr r12, [r11]
+ ldr r10, core_m2_mask_val @ modify m2 for core dpll
+ and r12, r12, r10
+ orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val
+ str r12, [r11]
+ ldr r12, [r11] @ posted-write barrier for CM
+ mov r12, #0x800 @ wait for the clock to stabilise
cmp r3, #2
bne wait_clk_stable
bx lr
wait_clk_stable:
- subs r5, r5, #1
+ subs r12, r12, #1
bne wait_clk_stable
nop
nop
@@ -116,42 +121,42 @@ wait_clk_stable:
nop
bx lr
enable_sdrc:
- ldr r4, omap3_cm_iclken1_core
- ldr r5, [r4]
- orr r5, r5, #0x2 @ enable iclk bit for SDRC
- str r5, [r4]
+ ldr r11, omap3_cm_iclken1_core
+ ldr r12, [r11]
+ orr r12, r12, #0x2 @ enable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle1:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2
- cmp r5, #0
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2
+ cmp r12, #0
bne wait_sdrc_idle1
- ldr r4, omap3_sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
+restore_sdrc_power_val:
+ ldr r11, omap3_sdrc_power
+ str r9, [r11] @ restore SDRC_POWER, no barrier needed
bx lr
wait_dll_lock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x4
bne wait_dll_lock
bx lr
wait_dll_unlock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x0
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x0
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r4, omap3_sdrc_rfr_ctrl
- str r0, [r4]
- ldr r4, omap3_sdrc_actim_ctrla
- str r1, [r4]
- ldr r4, omap3_sdrc_actim_ctrlb
- str r2, [r4]
+ ldr r11, omap3_sdrc_rfr_ctrl
+ str r0, [r11]
+ ldr r11, omap3_sdrc_actim_ctrla
+ str r1, [r11]
+ ldr r11, omap3_sdrc_actim_ctrlb
+ str r2, [r11]
+ ldr r2, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index f36aba12090e..2ce474a9d2b6 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -17,9 +17,10 @@
*
* Some parts based off of TI's 24xx code:
*
- * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -82,7 +83,8 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_PERIODIC:
period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
period -= 1;
-
+ if (cpu_is_omap44xx())
+ period = 0xff; /* FIXME: */
omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -145,6 +147,9 @@ static void __init omap2_gp_clockevent_init(void)
"timer-gp: omap_dm_timer_set_source() failed\n");
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ if (cpu_is_omap44xx())
+ /* Assuming 32kHz clk is driving GPT1 */
+ tick_rate = 32768; /* FIXME: */
pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
gptimer_id, tick_rate);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 34a56a136efd..d85296dc896c 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,10 +28,20 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+ /* Ensure force-idle mode for OTG controller */
+ if (cpu_is_omap34xx())
+ omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
static struct resource musb_resources[] = {
[0] = { /* start and end set dynamically */
.flags = IORESOURCE_MEM,
@@ -184,4 +194,13 @@ void __init usb_musb_init(void)
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
}
+
+ usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+ usb_musb_pm_init();
}
+#endif /* CONFIG_USB_MUSB_SOC */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index d483b2592ec8..9a6ecc7159b7 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -23,6 +23,11 @@ config ARCH_OMAP3
select CPU_V7
select COMMON_CLKDEV
+config ARCH_OMAP4
+ bool "TI OMAP4"
+ select CPU_V7
+ select ARM_GIC
+
endchoice
comment "OMAP Feature Selections"
@@ -131,13 +136,13 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX and 34XX.
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
endchoice
@@ -152,7 +157,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to use OMAP Dual-Mode timers.
@@ -174,7 +179,7 @@ endchoice
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends on OMAP_MUX
+ depends on ARCH_OMAP1 && OMAP_MUX
default y
help
Select this option if you want to have your system wake up
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 29efc279287a..e8c327a45a55 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,40 @@ static struct clk_functions *arch_clock;
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
int clk_enable(struct clk *clk)
{
unsigned long flags;
int ret = 0;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
@@ -140,6 +170,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
unsigned long flags;
int ret = -EINVAL;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
@@ -240,13 +273,13 @@ void recalculate_root_clocks(void)
}
/**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
* @clk: struct clk * to initialize
*
* Initialize any struct clk fields needed before normal clk initialization
* can run. No return value.
*/
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 433021f3d7cc..ebcf006406f9 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -2,6 +2,10 @@
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/tty.h>
@@ -175,25 +178,70 @@ console_initcall(omap_add_serial_console);
* but systems won't necessarily want to spend resources that way.
*/
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-#ifdef TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
#include <linux/clocksource.h>
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+ return 0;
}
static struct clocksource clocksource_32k = {
.name = "32k_counter",
.rating = 250,
- .read = omap_32k_read,
+ .read = omap_32k_read_dummy,
.mask = CLOCKSOURCE_MASK(32),
.shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -207,7 +255,7 @@ unsigned long long sched_clock(void)
{
unsigned long long ret;
- ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+ ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
return ret;
}
@@ -220,6 +268,19 @@ static int __init omap_init_clocksource_32k(void)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
struct clk *sync_32k_ick;
+ if (cpu_is_omap16xx())
+ clocksource_32k.read = omap16xx_32k_read;
+ else if (cpu_is_omap2420())
+ clocksource_32k.read = omap2420_32k_read;
+ else if (cpu_is_omap2430())
+ clocksource_32k.read = omap2430_32k_read;
+ else if (cpu_is_omap34xx())
+ clocksource_32k.read = omap34xx_32k_read;
+ else if (cpu_is_omap44xx())
+ clocksource_32k.read = omap44xx_32k_read;
+ else
+ return -ENODEV;
+
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick)
clk_enable(sync_32k_ick);
@@ -234,15 +295,13 @@ static int __init omap_init_clocksource_32k(void)
}
arch_initcall(omap_init_clocksource_32k);
-#endif /* TIMER_32K_SYNCHRONIZED */
+#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
omap2_set_globals_sdrc(omap2_globals);
@@ -266,8 +325,7 @@ static struct omap_globals omap242x_globals = {
void __init omap2_set_globals_242x(void)
{
- omap2_globals = &omap242x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap242x_globals);
}
#endif
@@ -285,8 +343,7 @@ static struct omap_globals omap243x_globals = {
void __init omap2_set_globals_243x(void)
{
- omap2_globals = &omap243x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap243x_globals);
}
#endif
@@ -304,8 +361,23 @@ static struct omap_globals omap343x_globals = {
void __init omap2_set_globals_343x(void)
{
- omap2_globals = &omap343x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+ .class = OMAP443X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x4830a000),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+ omap2_set_globals_tap(&omap4_globals);
+ omap2_set_globals_control(&omap4_globals);
}
#endif
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 87fb7ff41794..a64b692a1bfe 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -311,6 +311,8 @@ static void omap_init_wdt(void)
wdt_resources[0].start = 0x49016000; /* WDT2 */
else if (cpu_is_omap343x())
wdt_resources[0].start = 0x48314000; /* WDT2 */
+ else if (cpu_is_omap44xx())
+ wdt_resources[0].start = 0x4a314000;
else
return;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c045ad5d..def14ec265b3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -10,6 +10,9 @@
* Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* Support functions for the OMAP internal DMA channels.
*
* This program is free software; you can redistribute it and/or modify
@@ -310,41 +313,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
- u16 w;
-
BUG_ON(omap_dma_in_1510_mode());
- if (cpu_class_is_omap2()) {
- REVISIT_24XX();
- return;
- }
+ if (cpu_class_is_omap1()) {
+ u16 w;
- w = dma_read(CCR2(lch));
- w &= ~0x03;
+ w = dma_read(CCR2(lch));
+ w &= ~0x03;
- switch (mode) {
- case OMAP_DMA_CONSTANT_FILL:
- w |= 0x01;
- break;
- case OMAP_DMA_TRANSPARENT_COPY:
- w |= 0x02;
- break;
- case OMAP_DMA_COLOR_DIS:
- break;
- default:
- BUG();
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ w |= 0x01;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ w |= 0x02;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(w, CCR2(lch));
+
+ w = dma_read(LCH_CTRL(lch));
+ w &= ~0x0f;
+ /* Default is channel type 2D */
+ if (mode) {
+ dma_write((u16)color, COLOR_L(lch));
+ dma_write((u16)(color >> 16), COLOR_U(lch));
+ w |= 1; /* Channel type G */
+ }
+ dma_write(w, LCH_CTRL(lch));
}
- dma_write(w, CCR2(lch));
- w = dma_read(LCH_CTRL(lch));
- w &= ~0x0f;
- /* Default is channel type 2D */
- if (mode) {
- dma_write((u16)color, COLOR_L(lch));
- dma_write((u16)(color >> 16), COLOR_U(lch));
- w |= 1; /* Channel type G */
+ if (cpu_class_is_omap2()) {
+ u32 val;
+
+ val = dma_read(CCR(lch));
+ val &= ~((1 << 17) | (1 << 16));
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ val |= 1 << 16;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ val |= 1 << 17;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(val, CCR(lch));
+
+ color &= 0xffffff;
+ dma_write(color, COLOR(lch));
}
- dma_write(w, LCH_CTRL(lch));
}
EXPORT_SYMBOL(omap_set_dma_color_mode);
@@ -851,7 +875,7 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
}
l = dma_read(CCR(lch));
l &= ~((1 << 6) | (1 << 26));
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@@ -1199,7 +1223,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans, int chain_mode,
struct omap_dma_channel_params params)
@@ -1823,7 +1847,8 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
#define omap1_dma_irq_handler NULL
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
static int omap2_dma_handle_ch(int ch)
{
@@ -2318,6 +2343,9 @@ static int __init omap_init_dma(void)
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap44xx()) {
+ omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
return -ENODEV;
@@ -2416,12 +2444,18 @@ static int __init omap_init_dma(void)
}
}
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2())
- setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+ if (cpu_class_is_omap2()) {
+ int irq;
+ if (cpu_is_omap44xx())
+ irq = INT_44XX_SDMA_IRQ0;
+ else
+ irq = INT_24XX_SDMA_IRQ0;
+ setup_irq(irq, &omap24xx_dma_irq);
+ }
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 55bb99631292..7f50b6103dee 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -7,6 +7,9 @@
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -150,7 +153,8 @@
struct omap_dm_timer {
unsigned long phys_base;
int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *iclk, *fclk;
#endif
void __iomem *io_base;
@@ -169,6 +173,9 @@ struct omap_dm_timer {
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap1_dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
@@ -191,6 +198,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap2_dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
@@ -214,7 +224,7 @@ static const char *omap2_dm_source_names[] __initdata = {
NULL
};
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
#elif defined(CONFIG_ARCH_OMAP3)
@@ -225,6 +235,9 @@ static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
#define omap2_dm_timers NULL
#define omap2_dm_source_names NULL
#define omap2_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
@@ -247,9 +260,43 @@ static const char *omap3_dm_source_names[] __initdata = {
NULL
};
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x) clk_enable(x)
+#define omap_dm_clk_disable(x) clk_disable(x)
+#define omap1_dm_timers NULL
+#define omap2_dm_timers NULL
+#define omap2_dm_source_names NULL
+#define omap2_dm_source_clocks NULL
+#define omap3_dm_timers NULL
+#define omap3_dm_source_names NULL
+#define omap3_dm_source_clocks NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+ { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+ { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+ { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+ { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+ { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+ { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+ { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+ { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+ { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+ { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+ "sys_ck",
+ "omap_32k_fck",
+ NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
#else
#error OMAP architecture not supported!
@@ -257,7 +304,7 @@ static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
#endif
static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
static struct clk **dm_source_clocks;
static spinlock_t dm_timer_lock;
@@ -459,7 +506,8 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
}
EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
@@ -705,12 +753,16 @@ int __init omap_dm_timer_init(void)
dm_timers = omap1_dm_timers;
else if (cpu_is_omap24xx()) {
dm_timers = omap2_dm_timers;
- dm_source_names = (char **)omap2_dm_source_names;
- dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+ dm_source_names = omap2_dm_source_names;
+ dm_source_clocks = omap2_dm_source_clocks;
} else if (cpu_is_omap34xx()) {
dm_timers = omap3_dm_timers;
- dm_source_names = (char **)omap3_dm_source_names;
- dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+ dm_source_names = omap3_dm_source_names;
+ dm_source_clocks = omap3_dm_source_clocks;
+ } else if (cpu_is_omap44xx()) {
+ dm_timers = omap4_dm_timers;
+ dm_source_names = omap4_dm_source_names;
+ dm_source_clocks = omap4_dm_source_clocks;
}
if (cpu_class_is_omap2())
@@ -723,7 +775,8 @@ int __init omap_dm_timer_init(void)
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {
char clk_name[16];
sprintf(clk_name, "gpt%d_ick", i + 1);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index ee0b21f5b094..7fd89ba8d3b5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -6,6 +6,9 @@
* Copyright (C) 2003-2005 Nokia Corporation
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -146,6 +149,16 @@
#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
+/*
+ * OMAP44XX specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
+
#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
struct gpio_bank {
@@ -153,11 +166,13 @@ struct gpio_bank {
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
@@ -251,6 +266,24 @@ static struct gpio_bank gpio_bank_34xx[6] = {
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+ { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+ METHOD_GPIO_24XX },
+};
+
+#endif
+
static struct gpio_bank *gpio_bank;
static int gpio_bank_count;
@@ -273,7 +306,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
}
if (cpu_is_omap24xx())
return &gpio_bank[gpio >> 5];
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return &gpio_bank[gpio >> 5];
BUG();
return NULL;
@@ -285,7 +318,7 @@ static inline int get_gpio_index(int gpio)
return gpio & 0x1f;
if (cpu_is_omap24xx())
return gpio & 0x1f;
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return gpio & 0x1f;
return gpio & 0x0f;
}
@@ -307,7 +340,7 @@ static inline int gpio_valid(int gpio)
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 192)
+ if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
return 0;
return -1;
}
@@ -353,7 +386,8 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
reg += OMAP850_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
@@ -425,7 +459,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -476,7 +511,8 @@ static int __omap_get_gpio_datain(int gpio)
reg += OMAP850_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
@@ -520,7 +556,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
else
goto done;
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
clk_enable(bank->dbck);
else
@@ -550,7 +586,8 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
@@ -660,7 +697,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
goto bad;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
@@ -745,7 +783,8 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
reg += OMAP850_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
@@ -814,7 +853,8 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
@@ -887,7 +927,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -932,7 +973,8 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
@@ -1017,7 +1059,8 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1069,7 +1112,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (bank->method == METHOD_GPIO_850)
isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
@@ -1346,7 +1390,7 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
/*---------------------------------------------------------------------*/
static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
static struct clk * gpio_ick;
#endif
@@ -1359,7 +1403,7 @@ static struct clk * gpio5_ick;
static struct clk * gpio5_fck;
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
#endif
@@ -1419,8 +1463,8 @@ static int __init _omap_gpio_init(void)
}
#endif
-#if defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
sprintf(clk_name, "gpio%d_ick", i + 1);
gpio_iclks[i] = clk_get(NULL, clk_name);
@@ -1497,6 +1541,17 @@ static int __init _omap_gpio_init(void)
(rev >> 4) & 0x0f, rev & 0x0f);
}
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ int rev;
+
+ gpio_bank_count = OMAP34XX_NR_GPIOS;
+ gpio_bank = gpio_bank_44xx;
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+ }
+#endif
for (i = 0; i < gpio_bank_count; i++) {
int j, gpio_count = 16;
@@ -1520,7 +1575,8 @@ static int __init _omap_gpio_init(void)
gpio_count = 32; /* 730 has 32-bit GPIOs */
}
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
@@ -1577,7 +1633,7 @@ static int __init _omap_gpio_init(void)
set_irq_chained_handler(bank->irq, gpio_irq_handler);
set_irq_data(bank->irq, bank);
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sprintf(clk_name, "gpio%d_dbck", i + 1);
bank->dbck = clk_get(NULL, clk_name);
if (IS_ERR(bank->dbck))
@@ -1599,7 +1655,8 @@ static int __init _omap_gpio_init(void)
return 0;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
@@ -1622,7 +1679,8 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
@@ -1663,7 +1721,8 @@ static int omap_gpio_resume(struct sys_device *dev)
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
@@ -1695,7 +1754,8 @@ static struct sys_device omap_gpio_device = {
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static int workaround_enabled;
@@ -1711,7 +1771,8 @@ void omap2_gpio_prepare_for_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
@@ -1720,7 +1781,8 @@ void omap2_gpio_prepare_for_retention(void)
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
@@ -1745,7 +1807,8 @@ void omap2_gpio_resume_after_retention(void)
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
@@ -1755,14 +1818,16 @@ void omap2_gpio_resume_after_retention(void)
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
#endif
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1798,7 +1863,8 @@ static int __init omap_gpio_sysinit(void)
mpuio_init();
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
@@ -1887,7 +1953,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX)
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071d5e36..8b848391f0c8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2007 Nokia Corporation.
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 073a2c5569f0..f9f65e1ba3f1 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -22,7 +22,8 @@ struct clkops {
void (*disable)(struct clk *);
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clksel_rate {
u32 val;
@@ -51,7 +52,7 @@ struct dpll_data {
u8 max_divider;
u32 max_tolerance;
u16 max_multiplier;
-# if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
u8 modes;
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
@@ -83,7 +84,8 @@ struct clk {
void (*init)(struct clk *);
__u8 enable_bit;
__s8 usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
u8 fixed_div;
void __iomem *clksel_reg;
u32 clksel_mask;
@@ -119,7 +121,7 @@ struct clk_functions {
extern unsigned int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
index 0ecf36deb17b..fdeab421b4dc 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -33,8 +33,6 @@ struct sys_timer;
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
@@ -62,6 +60,7 @@ struct omap_globals {
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 269147f3836f..8140dbccb7bc 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,9 +1,9 @@
/*
* arch/arm/plat-omap/include/mach/control.h
*
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
@@ -144,6 +144,10 @@
#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0)
#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
@@ -189,8 +193,18 @@
#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
#define OMAP2_PBIASLITEVMODE0 (1 << 0)
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT 0
+#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+
#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 98b144252364..fc60c4ebcc28 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -5,8 +5,12 @@
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
+ * Copyright (C) 2009 Texas Instruments.
+ *
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -155,6 +159,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -348,12 +354,21 @@ IS_OMAP_TYPE(3430, 0x3430)
# define cpu_is_omap3430() is_omap3430()
#endif
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx() 1
+# define cpu_is_omap443x() 1
+# endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
+ cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
@@ -370,6 +385,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP443X_CLASS 0x44300034
+
/*
* omap_chip bits
*
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b11f5c6a2d9..ac24050e3416 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -36,7 +36,7 @@
add \rx, \rx, #0x00004000 @ UART 3
#endif
-#elif CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
orr \rx, \rx, #0x0006a000
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe9665b182..8c1eae88737e 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -48,6 +48,7 @@
/* Hardware registers for omap2 and omap3 */
#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000)
#define OMAP_DMA4_REVISION 0x00
#define OMAP_DMA4_GCR 0x78
@@ -144,6 +145,7 @@
#define OMAP_DMA4_CSSA_U(n) 0
#define OMAP_DMA4_CDSA_L(n) 0
#define OMAP_DMA4_CDSA_U(n) 0
+#define OMAP1_DMA_COLOR(n) 0
/*----------------------------------------------------------------------------*/
@@ -531,7 +533,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi);
/* Chaining APIs */
#ifndef CONFIG_ARCH_OMAP1
extern int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans,
int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 2276f89671d8..00f45c01390d 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -3,6 +3,9 @@
*
* Low-level IRQ helper macros for OMAP-based platforms
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -10,6 +13,7 @@
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
#if defined(CONFIG_ARCH_OMAP1)
@@ -56,15 +60,21 @@
.endm
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
-#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
#include <mach/omap34xx.h>
-#endif
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
@@ -77,6 +87,7 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
+#ifndef CONFIG_ARCH_OMAP4
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP2_VA_IC_BASE
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
@@ -92,6 +103,40 @@
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
.endm
+#else
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an
+ * interrupt if it's between 30 and 1020. The test_for_ipi
+ * routine below will pick up on IPIs.
+ * A simple read from the controller will tell us the number
+ * of the highest priority enabled interrupt.
+ * We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =OMAP44XX_VA_GIC_CPU_BASE
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+ .endm
+#endif
.macro irq_prio_table
.endm
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 000000000000..b64fbee4d567
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96 (1 << 4)
+#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+ int cs;
+ int gpio_irq;
+ int gpio_pwrdwn;
+ int gpio_reset;
+ int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
+ u32 flags;
+ int (*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+ defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 3dc423ed3e80..26c1fbff08aa 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -285,5 +285,6 @@
#include "omap16xx.h"
#include "omap24xx.h"
#include "omap34xx.h"
+#include "omap44xx.h"
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492f2d3c..886248d32b49 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
#define _HWA742_H
struct hwa742_platform_data {
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
- unsigned long (*get_clock_rate)(struct device *dev);
-
unsigned te_connected:1;
};
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 0610d7e2b3d7..3b2814720569 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -6,6 +6,9 @@
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -157,6 +160,40 @@
#define DSP_MMU_34XX_VIRT 0xe2000000
#define DSP_MMU_34XX_SIZE SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS L3_44XX_BASE
+#define L3_44XX_VIRT 0xd4000000
+#define L3_44XX_SIZE SZ_1M
+
+#define L4_44XX_PHYS L4_44XX_BASE
+#define L4_44XX_VIRT 0xda000000
+#define L4_44XX_SIZE SZ_4M
+
+
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT 0xda300000
+#define L4_WK_44XX_SIZE SZ_1M
+
+#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT 0xd8000000
+#define L4_PER_44XX_SIZE SZ_4M
+
+#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT 0xe4000000
+#define L4_EMU_44XX_SIZE SZ_64M
+
+#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT 0xe0000000
+#define OMAP44XX_GPMC_SIZE SZ_1M
+
+
+#define IO_OFFSET 0x90000000
+#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
#endif
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 7f57ee66f364..8015fe27c8b0 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -4,6 +4,9 @@
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -422,6 +425,92 @@
#define INT_34XX_BENCH_MPU_EMUL 3
+
+#define IRQ_GIC_START 32
+
+#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START)
+
+
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
@@ -467,6 +556,7 @@
#ifndef __ASSEMBLY__
extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
#endif
#include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 232923aaf61d..45ea3ae3c995 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -33,7 +33,11 @@ struct omap_kp_platform_data {
#define GROUP_3 (3 << 16)
#define GROUP_MASK GROUP_3
+#define KEY_PERSISTENT 0x00800000
+#define KEYNUM_MASK 0x00EFFFFF
#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+ KEY_PERSISTENT)
#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 99ed564d9277..9ad41dc484c1 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,8 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
#define PHYS_OFFSET UL(0x80000000)
#endif
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 24335d4932f5..696edfc145a6 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -85,23 +85,5 @@
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
#endif /* __ASM_ARCH_OMAP24XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
index ab640151d3ec..f8d186a73712 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -31,13 +31,9 @@
#define L4_34XX_BASE 0x48000000
#define L4_WK_34XX_BASE 0x48300000
-#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
#define L4_PER_34XX_BASE 0x49000000
-#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
#define L4_EMU_34XX_BASE 0x54000000
-#define L4_EMU_BASE L4_EMU_34XX_BASE
#define L3_34XX_BASE 0x68000000
-#define L3_OMAP_BASE L3_34XX_BASE
#define OMAP3430_32KSYNCT_BASE 0x48320000
#define OMAP3430_CM_BASE 0x48004800
@@ -83,15 +79,6 @@
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
#define OMAP34XX_DSP_BASE 0x58000000
#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
new file mode 100644
index 000000000000..15dec7f1c7c0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE 0x4a000000
+#define L4_WK_44XX_BASE 0x4a300000
+#define L4_PER_44XX_BASE 0x48000000
+#define L4_EMU_44XX_BASE 0x54000000
+#define L3_44XX_BASE 0x44000000
+#define OMAP4430_32KSYNCT_BASE 0x4a304000
+#define OMAP4430_CM_BASE 0x4a004000
+#define OMAP4430_PRM_BASE 0x48306000
+#define OMAP44XX_GPMC_BASE 0x50000000
+#define OMAP443X_SCM_BASE 0x4a002000
+#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE 0x48200000
+#define OMAP44XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+#define OMAP44XX_GIC_DIST_BASE 0x48241000
+#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE 0x48240000
+#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
+#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d302c263..72f433d7d827 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
* published by the Free Software Foundation.
*/
+#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#define ONENAND_SYNC_READ (1 << 0)
+#define ONENAND_SYNC_READWRITE (1 << 1)
+
struct omap_onenand_platform_data {
int cs;
int gpio_irq;
@@ -18,8 +22,22 @@ struct omap_onenand_platform_data {
int nr_parts;
int (*onenand_setup)(void __iomem *, int freq);
int dma_channel;
+ u8 flags;
};
-int omap2_onenand_rephase(void);
-
#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 8a676a04be48..13abd02d1527 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -1,5 +1,8 @@
/*
- * arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,19 +18,28 @@
#define OMAP_UART1_BASE 0xfffb0000
#define OMAP_UART2_BASE 0xfffb0800
#define OMAP_UART3_BASE 0xfffb9800
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP2)
/* OMAP2 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP3)
/* OMAP3 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x49020000
+#define OMAP_MAX_NR_PORTS 3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x48020000
+#define OMAP_UART4_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 4
#endif
-#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
@@ -40,4 +52,13 @@
__ret; \
})
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index ab35d622dcf5..dca7c16ae903 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -23,7 +23,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -60,7 +61,8 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
index 69f0ceed500b..f337e1761e2c 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -27,13 +27,7 @@
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-#ifdef CONFIG_USB_MUSB_SOC
extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd96197..b97dfafeebda 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index af326efc1ad3..9b42d72d96cf 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -1,3 +1,14 @@
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
@@ -7,6 +18,7 @@
#include <mach/omap16xx.h>
#include <mach/omap24xx.h>
#include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
@@ -92,7 +104,22 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
}
#endif
-
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+ return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+ if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+ return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+ if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+ return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+ if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+ return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+ if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+ return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+ if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+ return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+ }
+#endif
return __arm_ioremap(p, size, type);
}
EXPORT_SYMBOL(omap_ioremap);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a824b8cf..efa0e0111f38 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id)
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_tx = dev_id;
+ u16 irqst_spcr2;
- dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+ dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
- complete(&mcbsp_tx->tx_irq_completion);
+ if (irqst_spcr2 & XSYNC_ERR) {
+ dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+ irqst_spcr2);
+ /* Writing zero to XSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+ irqst_spcr2 & ~(XSYNC_ERR));
+ } else {
+ complete(&mcbsp_tx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
@@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_rx = dev_id;
+ u16 irqst_spcr1;
- dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+ dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
- complete(&mcbsp_rx->rx_irq_completion);
+ if (irqst_spcr1 & RSYNC_ERR) {
+ dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+ irqst_spcr1);
+ /* Writing zero to RSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+ irqst_spcr1 & ~(RSYNC_ERR));
+ } else {
+ complete(&mcbsp_rx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 80b040fd5ca7..8d329fb20740 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,6 +54,9 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
{
struct pin_config *reg;
+ if (cpu_is_omap44xx())
+ return 0;
+
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
return -ENODEV;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index fa5297d643d3..a5b9bcd6b108 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,6 +6,9 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -38,12 +41,14 @@
#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
-#define OMAP2_SRAM_VA VMALLOC_END
-#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA 0xe3000000
+#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xd7000000
#define OMAP3_SRAM_PUB_PA 0x40208000
#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
+#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -87,6 +92,10 @@ static int is_sram_locked(void)
{
int type = 0;
+ if (cpu_is_omap44xx())
+ /* Not yet supported */
+ return 0;
+
if (cpu_is_omap242x())
type = omap_rev() & OMAP2_DEVICETYPE_MASK;
@@ -135,6 +144,10 @@ void __init omap_detect_sram(void)
omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_base = OMAP4_SRAM_VA;
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0x8000; /* 32K */
} else {
omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
@@ -201,8 +214,23 @@ void __init omap_map_sram(void)
base = OMAP3_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
}
+ if (cpu_is_omap44xx()) {
+ omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+ base = OMAP4_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ }
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
@@ -242,20 +270,13 @@ void * omap_sram_push(void * start, unsigned long size)
return (void *)omap_sram_ceil;
}
-static void omap_sram_error(void)
-{
- panic("Uninitialized SRAM function\n");
-}
-
#ifdef CONFIG_ARCH_OMAP1
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
- if (!_omap_sram_reprogram_clock)
- omap_sram_error();
-
+ BUG_ON(!_omap_sram_reprogram_clock);
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
@@ -280,9 +301,7 @@ static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
- if (!_omap2_sram_ddr_init)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_ddr_init);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
@@ -292,9 +311,7 @@ static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
{
- if (!_omap2_sram_reprogram_sdrc)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
@@ -302,9 +319,7 @@ static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
{
- if (!_omap2_set_prcm)
- omap_sram_error();
-
+ BUG_ON(!_omap2_set_prcm);
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
#endif
@@ -356,16 +371,15 @@ static inline int omap243x_sram_init(void)
static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb,
- u32 m2);
+ u32 m2, u32 unlock_dll);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2)
+ u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
{
- if (!_omap3_sram_configure_core_dpll)
- omap_sram_error();
-
+ BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla,
- sdrc_actim_ctrlb, m2);
+ sdrc_actim_ctrlb, m2,
+ unlock_dll);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
@@ -406,6 +420,8 @@ int __init omap_sram_init(void)
omap243x_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
+ else if (cpu_is_omap44xx())
+ omap34xx_sram_init(); /* FIXME: */
return 0;
}