summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-ep93xx/Makefile2
-rw-r--r--arch/arm/mach-ep93xx/core.c27
-rw-r--r--arch/arm/mach-ep93xx/gpio.c410
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h1
-rw-r--r--arch/arm/mach-imx/mach-apf9328.c2
-rw-r--r--arch/arm/mach-imx/mach-armadillo5x0.c2
-rw-r--r--arch/arm/mach-imx/mach-bug.c2
-rw-r--r--arch/arm/mach-imx/mach-cpuimx27.c2
-rw-r--r--arch/arm/mach-imx/mach-cpuimx35.c2
-rw-r--r--arch/arm/mach-imx/mach-eukrea_cpuimx25.c2
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c2
-rw-r--r--arch/arm/mach-imx/mach-imx27ipcam.c2
-rw-r--r--arch/arm/mach-imx/mach-imx27lite.c2
-rw-r--r--arch/arm/mach-imx/mach-kzm_arm11_01.c2
-rw-r--r--arch/arm/mach-imx/mach-mx1ads.c2
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c2
-rw-r--r--arch/arm/mach-imx/mach-mx25_3ds.c2
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c2
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c2
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c2
-rw-r--r--arch/arm/mach-imx/mach-mx31ads.c2
-rw-r--r--arch/arm/mach-imx/mach-mx31lilly.c2
-rw-r--r--arch/arm/mach-imx/mach-mx31lite.c2
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c2
-rw-r--r--arch/arm/mach-imx/mach-mx35_3ds.c2
-rw-r--r--arch/arm/mach-imx/mach-mxt_td60.c2
-rw-r--r--arch/arm/mach-imx/mach-pca100.c2
-rw-r--r--arch/arm/mach-imx/mach-pcm037.c2
-rw-r--r--arch/arm/mach-imx/mach-pcm038.c2
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c2
-rw-r--r--arch/arm/mach-imx/mach-qong.c2
-rw-r--r--arch/arm/mach-imx/mach-scb9328.c2
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c2
-rw-r--r--arch/arm/mach-imx/mm-imx1.c21
-rw-r--r--arch/arm/mach-imx/mm-imx21.c21
-rw-r--r--arch/arm/mach-imx/mm-imx25.c17
-rw-r--r--arch/arm/mach-imx/mm-imx27.c22
-rw-r--r--arch/arm/mach-imx/mm-imx31.c15
-rw-r--r--arch/arm/mach-imx/mm-imx35.c16
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51.c2
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51sd.c2
-rw-r--r--arch/arm/mach-mx5/board-mx50_rdp.c2
-rw-r--r--arch/arm/mach-mx5/board-mx51_3ds.c2
-rw-r--r--arch/arm/mach-mx5/board-mx51_babbage.c2
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikamx.c2
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikasb.c2
-rw-r--r--arch/arm/mach-mx5/board-mx53_evk.c2
-rw-r--r--arch/arm/mach-mx5/board-mx53_loco.c2
-rw-r--r--arch/arm/mach-mx5/board-mx53_smd.c2
-rw-r--r--arch/arm/mach-mx5/devices.c64
-rw-r--r--arch/arm/mach-mx5/mm-mx50.c22
-rw-r--r--arch/arm/mach-mx5/mm.c27
-rw-r--r--arch/arm/mach-mxs/Makefile2
-rw-r--r--arch/arm/mach-mxs/devices.c11
-rw-r--r--arch/arm/mach-mxs/devices/Makefile1
-rw-r--r--arch/arm/mach-mxs/devices/platform-gpio-mxs.c53
-rw-r--r--arch/arm/mach-mxs/gpio.c331
-rw-r--r--arch/arm/mach-mxs/gpio.h34
-rw-r--r--arch/arm/mach-mxs/include/mach/devices-common.h2
-rw-r--r--arch/arm/mach-mxs/mach-mx28evk.c1
-rw-r--r--arch/arm/mach-mxs/mm-mx23.c1
-rw-r--r--arch/arm/mach-mxs/mm-mx28.c1
-rw-r--r--arch/arm/mach-omap1/gpio15xx.c22
-rw-r--r--arch/arm/mach-omap1/gpio16xx.c28
-rw-r--r--arch/arm/mach-omap1/gpio7xx.c27
-rw-r--r--arch/arm/mach-omap2/gpio.c32
-rw-r--r--arch/arm/mach-tegra/Makefile1
-rw-r--r--arch/arm/mach-tegra/gpio.c431
-rw-r--r--arch/arm/plat-mxc/Makefile2
-rw-r--r--arch/arm/plat-mxc/devices.c11
-rw-r--r--arch/arm/plat-mxc/devices/Makefile1
-rw-r--r--arch/arm/plat-mxc/devices/platform-gpio-mxc.c32
-rw-r--r--arch/arm/plat-mxc/gpio.c361
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h12
-rw-r--r--arch/arm/plat-mxc/include/mach/devices-common.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/gpio.h27
-rw-r--r--arch/arm/plat-mxc/include/mach/irqs.h21
-rw-r--r--arch/arm/plat-omap/include/plat/gpio.h20
-rw-r--r--arch/powerpc/platforms/52xx/Kconfig8
-rw-r--r--arch/powerpc/platforms/52xx/Makefile1
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_gpio.c380
81 files changed, 446 insertions, 2153 deletions
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 33ee2c863d18..6b7c41d155df 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the linux kernel.
#
-obj-y := core.o clock.o dma-m2p.o gpio.o
+obj-y := core.o clock.o dma-m2p.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6659a0d137a3..c488e4bd61e7 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -174,14 +174,10 @@ struct sys_timer ep93xx_timer = {
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
-extern void ep93xx_gpio_init_irq(void);
-
void __init ep93xx_init_irq(void)
{
vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-
- ep93xx_gpio_init_irq();
}
@@ -241,6 +237,24 @@ unsigned int ep93xx_chip_revision(void)
}
/*************************************************************************
+ * EP93xx GPIO
+ *************************************************************************/
+static struct resource ep93xx_gpio_resource[] = {
+ {
+ .start = EP93XX_GPIO_PHYS_BASE,
+ .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ep93xx_gpio_device = {
+ .name = "gpio-ep93xx",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_gpio_resource),
+ .resource = ep93xx_gpio_resource,
+};
+
+/*************************************************************************
* EP93xx peripheral handling
*************************************************************************/
#define EP93XX_UART_MCR_OFFSET (0x0100)
@@ -870,14 +884,13 @@ void __init ep93xx_register_ac97(void)
platform_device_register(&ep93xx_pcm_device);
}
-extern void ep93xx_gpio_init(void);
-
void __init ep93xx_init_devices(void)
{
/* Disallow access to MaverickCrunch initially */
ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
- ep93xx_gpio_init();
+ /* Get the GPIO working early, other devices need it */
+ platform_device_register(&ep93xx_gpio_device);
amba_device_register(&uart1_device, &iomem_resource);
amba_device_register(&uart2_device, &iomem_resource);
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
deleted file mode 100644
index 415dce37b88c..000000000000
--- a/arch/arm/mach-ep93xx/gpio.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * linux/arch/arm/mach-ep93xx/gpio.c
- *
- * Generic EP93xx GPIO handling
- *
- * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
- *
- * Based on code originally from:
- * linux/arch/arm/mach-ep93xx/core.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/seq_file.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <mach/hardware.h>
-
-/*************************************************************************
- * Interrupt handling for EP93xx on-chip GPIOs
- *************************************************************************/
-static unsigned char gpio_int_unmasked[3];
-static unsigned char gpio_int_enabled[3];
-static unsigned char gpio_int_type1[3];
-static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debounce[3];
-
-/* Port ordering is: A B F */
-static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
-static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
-static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
-static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
-static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
-
-static void ep93xx_gpio_update_int_params(unsigned port)
-{
- BUG_ON(port > 2);
-
- __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
-
- __raw_writeb(gpio_int_type2[port],
- EP93XX_GPIO_REG(int_type2_register_offset[port]));
-
- __raw_writeb(gpio_int_type1[port],
- EP93XX_GPIO_REG(int_type1_register_offset[port]));
-
- __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
- EP93XX_GPIO_REG(int_en_register_offset[port]));
-}
-
-static inline void ep93xx_gpio_int_mask(unsigned line)
-{
- gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-}
-
-static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
-{
- int line = irq_to_gpio(irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if (enable)
- gpio_int_debounce[port] |= port_mask;
- else
- gpio_int_debounce[port] &= ~port_mask;
-
- __raw_writeb(gpio_int_debounce[port],
- EP93XX_GPIO_REG(int_debounce_register_offset[port]));
-}
-
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned char status;
- int i;
-
- status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-
- status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
- for (i = 0; i < 8; i++) {
- if (status & (1 << i)) {
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- generic_handle_irq(gpio_irq);
- }
- }
-}
-
-static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- /*
- * map discontiguous hw irq range to continuous sw irq range:
- *
- * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
- */
- int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
- int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
-
- generic_handle_irq(gpio_irq);
-}
-
-static void ep93xx_gpio_irq_ack(struct irq_data *d)
-{
- int line = irq_to_gpio(d->irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
- ep93xx_gpio_update_int_params(port);
- }
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
-{
- int line = irq_to_gpio(d->irq);
- int port = line >> 3;
- int port_mask = 1 << (line & 7);
-
- if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
- gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-
- gpio_int_unmasked[port] &= ~port_mask;
- ep93xx_gpio_update_int_params(port);
-
- __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
-}
-
-static void ep93xx_gpio_irq_mask(struct irq_data *d)
-{
- int line = irq_to_gpio(d->irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
- ep93xx_gpio_update_int_params(port);
-}
-
-static void ep93xx_gpio_irq_unmask(struct irq_data *d)
-{
- int line = irq_to_gpio(d->irq);
- int port = line >> 3;
-
- gpio_int_unmasked[port] |= 1 << (line & 7);
- ep93xx_gpio_update_int_params(port);
-}
-
-/*
- * gpio_int_type1 controls whether the interrupt is level (0) or
- * edge (1) triggered, while gpio_int_type2 controls whether it
- * triggers on low/falling (0) or high/rising (1).
- */
-static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
-{
- const int gpio = irq_to_gpio(d->irq);
- const int port = gpio >> 3;
- const int port_mask = 1 << (gpio & 7);
- irq_flow_handler_t handler;
-
- gpio_direction_input(gpio);
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] |= port_mask;
- handler = handle_edge_irq;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- gpio_int_type1[port] |= port_mask;
- gpio_int_type2[port] &= ~port_mask;
- handler = handle_edge_irq;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] |= port_mask;
- handler = handle_level_irq;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- gpio_int_type1[port] &= ~port_mask;
- gpio_int_type2[port] &= ~port_mask;
- handler = handle_level_irq;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- gpio_int_type1[port] |= port_mask;
- /* set initial polarity based on current input level */
- if (gpio_get_value(gpio))
- gpio_int_type2[port] &= ~port_mask; /* falling */
- else
- gpio_int_type2[port] |= port_mask; /* rising */
- handler = handle_edge_irq;
- break;
- default:
- pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
- return -EINVAL;
- }
-
- __irq_set_handler_locked(d->irq, handler);
-
- gpio_int_enabled[port] |= port_mask;
-
- ep93xx_gpio_update_int_params(port);
-
- return 0;
-}
-
-static struct irq_chip ep93xx_gpio_irq_chip = {
- .name = "GPIO",
- .irq_ack = ep93xx_gpio_irq_ack,
- .irq_mask_ack = ep93xx_gpio_irq_mask_ack,
- .irq_mask = ep93xx_gpio_irq_mask,
- .irq_unmask = ep93xx_gpio_irq_unmask,
- .irq_set_type = ep93xx_gpio_irq_type,
-};
-
-void __init ep93xx_gpio_init_irq(void)
-{
- int gpio_irq;
-
- for (gpio_irq = gpio_to_irq(0);
- gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
- irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip,
- handle_level_irq);
- set_irq_flags(gpio_irq, IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EP93XX_GPIO_AB,
- ep93xx_gpio_ab_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX,
- ep93xx_gpio_f_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX,
- ep93xx_gpio_f_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX,
- ep93xx_gpio_f_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX,
- ep93xx_gpio_f_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX,
- ep93xx_gpio_f_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX,
- ep93xx_gpio_f_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX,
- ep93xx_gpio_f_irq_handler);
- irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX,
- ep93xx_gpio_f_irq_handler);
-}
-
-
-/*************************************************************************
- * gpiolib interface for EP93xx on-chip GPIOs
- *************************************************************************/
-struct ep93xx_gpio_chip {
- struct gpio_chip chip;
-
- void __iomem *data_reg;
- void __iomem *data_dir_reg;
-};
-
-#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-
-static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
- unsigned long flags;
- u8 v;
-
- local_irq_save(flags);
- v = __raw_readb(ep93xx_chip->data_dir_reg);
- v &= ~(1 << offset);
- __raw_writeb(v, ep93xx_chip->data_dir_reg);
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int ep93xx_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int val)
-{
- struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
- unsigned long flags;
- int line;
- u8 v;
-
- local_irq_save(flags);
-
- /* Set the value */
- v = __raw_readb(ep93xx_chip->data_reg);
- if (val)
- v |= (1 << offset);
- else
- v &= ~(1 << offset);
- __raw_writeb(v, ep93xx_chip->data_reg);
-
- /* Drive as an output */
- line = chip->base + offset;
- if (line <= EP93XX_GPIO_LINE_MAX_IRQ) {
- /* Ports A/B/F */
- ep93xx_gpio_int_mask(line);
- ep93xx_gpio_update_int_params(line >> 3);
- }
-
- v = __raw_readb(ep93xx_chip->data_dir_reg);
- v |= (1 << offset);
- __raw_writeb(v, ep93xx_chip->data_dir_reg);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-
- return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset));
-}
-
-static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
- struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
- unsigned long flags;
- u8 v;
-
- local_irq_save(flags);
- v = __raw_readb(ep93xx_chip->data_reg);
- if (val)
- v |= (1 << offset);
- else
- v &= ~(1 << offset);
- __raw_writeb(v, ep93xx_chip->data_reg);
- local_irq_restore(flags);
-}
-
-static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
- unsigned offset, unsigned debounce)
-{
- int gpio = chip->base + offset;
- int irq = gpio_to_irq(gpio);
-
- if (irq < 0)
- return -EINVAL;
-
- ep93xx_gpio_int_debounce(irq, debounce ? true : false);
-
- return 0;
-}
-
-#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \
- { \
- .chip = { \
- .label = name, \
- .direction_input = ep93xx_gpio_direction_input, \
- .direction_output = ep93xx_gpio_direction_output, \
- .get = ep93xx_gpio_get, \
- .set = ep93xx_gpio_set, \
- .base = base_gpio, \
- .ngpio = 8, \
- }, \
- .data_reg = EP93XX_GPIO_REG(dr), \
- .data_dir_reg = EP93XX_GPIO_REG(ddr), \
- }
-
-static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
- EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
- EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
- EP93XX_GPIO_BANK("C", 0x08, 0x18, 40),
- EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
- EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
- EP93XX_GPIO_BANK("F", 0x30, 0x34, 16),
- EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
- EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
-};
-
-void __init ep93xx_gpio_init(void)
-{
- int i;
-
- /* Set Ports C, D, E, G, and H for GPIO use */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
- EP93XX_SYSCON_DEVCFG_GONK |
- EP93XX_SYSCON_DEVCFG_EONIDE |
- EP93XX_SYSCON_DEVCFG_GONIDE |
- EP93XX_SYSCON_DEVCFG_HONIDE);
-
- for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
- struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
-
- /*
- * Ports A, B, and F support input debouncing when
- * used as interrupts.
- */
- if (!strcmp(chip->label, "A") ||
- !strcmp(chip->label, "B") ||
- !strcmp(chip->label, "F"))
- chip->set_debounce = ep93xx_gpio_set_debounce;
-
- gpiochip_add(chip);
- }
-}
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 9ac4d1055097..c4a7b84ef06d 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -98,6 +98,7 @@
#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
+#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000)
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 15e45c84e371..59d2a3b137d9 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = {
static void __init apf9328_init(void)
{
+ imx1_soc_init();
+
mxc_gpio_setup_multiple_pins(apf9328_pins,
ARRAY_SIZE(apf9328_pins),
"APF9328");
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ffb40ff619b1..ede2710f8b76 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = {
*/
static void __init armadillo5x0_init(void)
{
+ imx31_soc_init();
+
mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 42e4f078a19c..f49470553bdf 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = {
static void __init bug_board_init(void)
{
+ imx31_soc_init();
+
mxc_iomux_setup_multiple_pins(bug_pins,
ARRAY_SIZE(bug_pins), "uart-4");
imx31_add_imx_uart4(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 46a2e41d43d2..87887ac5806b 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode);
static void __init eukrea_cpuimx27_init(void)
{
+ imx27_soc_init();
+
mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 3f8ef825fa6f..f39a478ba1a6 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
*/
static void __init eukrea_cpuimx35_init(void)
{
+ imx35_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
ARRAY_SIZE(eukrea_cpuimx35_pads));
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 148cff2819b9..da36da52969d 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode);
static void __init eukrea_cpuimx25_init(void)
{
+ imx25_soc_init();
+
if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads)))
printk(KERN_ERR "error setting cpuimx25 pads !\n");
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 7ae43b1ec517..c6269d60ddbc 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void)
{
int ret;
+ imx27_soc_init();
+
ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
if (ret)
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 9be6cd6fbf8c..272f793e9247 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = {
static void __init mx27ipcam_init(void)
{
+ imx27_soc_init();
+
mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
"mx27ipcam");
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 841140516ede..d81a769fe895 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
static void __init mx27lite_init(void)
{
+ imx27_soc_init();
+
mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
"imx27lite");
imx27_add_imx_uart0(&uart_pdata);
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 1ecae20cf4e3..e472a1d88058 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = {
*/
static void __init kzm_board_init(void)
{
+ imx31_soc_init();
+
mxc_iomux_setup_multiple_pins(kzm_pins,
ARRAY_SIZE(kzm_pins), "kzm");
kzm_init_ext_uart();
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 38ec5cbbda9b..5cd8bee46960 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = {
*/
static void __init mx1ads_init(void)
{
+ imx1_soc_init();
+
mxc_gpio_setup_multiple_pins(mx1ads_pins,
ARRAY_SIZE(mx1ads_pins), "mx1ads");
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 74ac88978ddd..d389ecf9b5a8 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = {
static void __init mx21ads_board_init(void)
{
+ imx21_soc_init();
+
mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
"mx21ads");
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 58ea3fdf0911..01534bb61305 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
static void __init mx25pdk_init(void)
{
+ imx25_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6e1accf93f81..117ce0a50f4e 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
static void __init mx27pdk_init(void)
{
+ imx27_soc_init();
+
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
mx27_3ds_sdhc1_enable_level_translator();
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 1db79506f5e4..fc26ed71b9ed 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
static void __init mx27ads_board_init(void)
{
+ imx27_soc_init();
+
mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
"mx27ads");
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index b5ecc26d08a4..441fbb83f39c 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -690,6 +690,8 @@ static void __init mx31_3ds_init(void)
{
int ret;
+ imx31_soc_init();
+
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
"mx31_3ds");
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index f4dee0254634..0ce49478a479 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void)
static void __init mx31ads_init(void)
{
+ imx31_soc_init();
+
mxc_init_extuart();
mxc_init_imx_uart();
mxc_init_i2c();
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 410e676ae087..750368ddf0f9 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
static void __init mx31lilly_board_init(void)
{
+ imx31_soc_init();
+
switch (mx31lilly_baseboard) {
case MX31LILLY_NOBOARD:
break;
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index ac9b4cad320e..4b47fd9fdd89 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -230,6 +230,8 @@ static void __init mx31lite_init(void)
{
int ret;
+ imx31_soc_init();
+
switch (mx31lite_baseboard) {
case MX31LITE_NOBOARD:
break;
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index eaa51e49ca95..a52fd36e2b52 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
*/
static void __init mx31moboard_init(void)
{
+ imx31_soc_init();
+
mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
"moboard");
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 882880ac1bbc..48b3c6fd5cf0 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
*/
static void __init mx35_3ds_init(void)
{
+ imx35_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
imx35_add_fec(NULL);
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 2774541511e7..c85876fed663 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
static void __init mxt_td60_board_init(void)
{
+ imx27_soc_init();
+
mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
"MXT_TD60");
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index bbddc5a11c43..71083aa16038 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -357,6 +357,8 @@ static void __init pca100_init(void)
{
int ret;
+ imx27_soc_init();
+
/* SSI unit */
mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 89c213b81295..f45b7cd72c8a 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -576,6 +576,8 @@ static void __init pcm037_init(void)
{
int ret;
+ imx31_soc_init();
+
mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 853bb871c7ed..2d6a64bbac44 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
static void __init pcm038_init(void)
{
+ imx27_soc_init();
+
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
"PCM038");
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 026441628dfa..163cc318cafb 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = {
*/
static void __init pcm043_init(void)
{
+ imx35_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
mxc_audmux_v2_configure_port(3,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index c16328715939..3626f486498a 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -244,6 +244,8 @@ static void __init qong_init_fpga(void)
*/
static void __init qong_init(void)
{
+ imx31_soc_init();
+
mxc_init_imx_uart();
qong_init_nor_mtd();
qong_init_fpga();
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index dcaee043628e..82805260e19c 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = {
*/
static void __init scb9328_init(void)
{
+ imx1_soc_init();
+
imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index d74e3473d236..7d8e012a6335 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = {
*/
static void __init vpr200_board_init(void)
{
+ imx35_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
imx35_add_fec(NULL);
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 2e482ba5a0e7..2bded591d5c2 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -23,7 +23,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include <mach/iomux-v1.h>
@@ -44,15 +43,19 @@ void __init imx1_init_early(void)
MX1_NUM_GPIO_PORT);
}
-static struct mxc_gpio_port imx1_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
- DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
- DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
- DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
-};
-
void __init mx1_init_irq(void)
{
mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
- mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports));
+}
+
+void __init imx1_soc_init(void)
+{
+ mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
+ MX1_GPIO_INT_PORTA, 0);
+ mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
+ MX1_GPIO_INT_PORTB, 0);
+ mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
+ MX1_GPIO_INT_PORTC, 0);
+ mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
+ MX1_GPIO_INT_PORTD, 0);
}
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 7a0c500ac2c8..6d7d518686a5 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -24,7 +24,6 @@
#include <mach/common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include <mach/iomux-v1.h>
@@ -70,17 +69,17 @@ void __init imx21_init_early(void)
MX21_NUM_GPIO_PORT);
}
-static struct mxc_gpio_port imx21_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
- DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
- DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
- DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
- DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
- DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
-};
-
void __init mx21_init_irq(void)
{
mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
- mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
+
+void __init imx21_soc_init(void)
+{
+ mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
}
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 02f7b5c7fa8e..9a1591c2508d 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -27,7 +27,6 @@
#include <mach/hardware.h>
#include <mach/mx25.h>
#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
/*
@@ -57,16 +56,16 @@ void __init imx25_init_early(void)
mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
}
-static struct mxc_gpio_port imx25_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
- DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
- DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
- DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
-};
-
void __init mx25_init_irq(void)
{
mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
- mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports));
}
+void __init imx25_soc_init(void)
+{
+ /* i.mx25 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
+ mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
+ mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
+ mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
+}
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index a6761a39f08c..133b30003ddb 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -24,7 +24,6 @@
#include <mach/common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
#include <mach/iomux-v1.h>
@@ -70,17 +69,18 @@ void __init imx27_init_early(void)
MX27_NUM_GPIO_PORT);
}
-static struct mxc_gpio_port imx27_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
- DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
- DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
- DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
- DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
- DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
-};
-
void __init mx27_init_irq(void)
{
mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
- mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+}
+
+void __init imx27_soc_init(void)
+{
+ /* i.mx27 has the i.mx21 type gpio */
+ mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
+ mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
}
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
index 86b9b45864d2..6d103c01b8b9 100644
--- a/arch/arm/mach-imx/mm-imx31.c
+++ b/arch/arm/mach-imx/mm-imx31.c
@@ -26,7 +26,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
static struct map_desc mx31_io_desc[] __initdata = {
@@ -53,14 +52,14 @@ void __init imx31_init_early(void)
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
}
-static struct mxc_gpio_port imx31_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
- DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
-};
-
void __init mx31_init_irq(void)
{
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
- mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports));
+}
+
+void __init imx31_soc_init(void)
+{
+ mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+ mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+ mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
index c880e6d1ae55..bb068bc8dab7 100644
--- a/arch/arm/mach-imx/mm-imx35.c
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -27,7 +27,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
static struct map_desc mx35_io_desc[] __initdata = {
@@ -50,14 +49,15 @@ void __init imx35_init_early(void)
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
}
-static struct mxc_gpio_port imx35_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
- DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
-};
-
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
- mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports));
+}
+
+void __init imx35_soc_init(void)
+{
+ /* i.mx35 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+ mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+ mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
}
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 4efa02ee1639..add0d42de7af 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode);
*/
static void __init eukrea_cpuimx51_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
ARRAY_SIZE(eukrea_cpuimx51_pads));
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 5ef25a596143..ff096d587299 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = {
static void __init eukrea_cpuimx51sd_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
ARRAY_SIZE(eukrea_cpuimx51sd_pads));
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index 11210e1ae42a..7de25c6712eb 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = {
*/
static void __init mx50_rdp_board_init(void)
{
+ imx50_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
ARRAY_SIZE(mx50_rdp_pads));
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 63dfbeafbc1e..3112d15feebc 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = {
*/
static void __init mx51_3ds_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
ARRAY_SIZE(mx51_3ds_pads));
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index c7b3fabf50f9..6021dd00ec75 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void)
iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ imx51_soc_init();
+
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 6e362315291b..3be603b9075a 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init);
static void __init mx51_efikamx_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 474fc6e4c6df..4b2e522de0f8 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void)
static void __init efikasb_board_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
ARRAY_SIZE(mx51efikasb_pads));
efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index f87d571882c6..0d9218a6e2d2 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = {
static void __init mx53_evk_board_init(void)
{
+ imx53_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 1b947e8c9c0c..359c3e248add 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
static void __init mx53_loco_board_init(void)
{
+ imx53_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
ARRAY_SIZE(mx53_loco_pads));
imx53_add_imx_uart(0, NULL);
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 817c08938f55..bc02894eafef 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
static void __init mx53_smd_board_init(void)
{
+ imx53_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
ARRAY_SIZE(mx53_smd_pads));
mx53_smd_init_uart();
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 153ada53e575..371ca8c8414c 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
@@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
-
-static struct mxc_gpio_port mxc_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO1_LOW,
- .irq_high = MX51_MXC_INT_GPIO1_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START
- },
- {
- .chip.label = "gpio-1",
- .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO2_LOW,
- .irq_high = MX51_MXC_INT_GPIO2_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
- },
- {
- .chip.label = "gpio-2",
- .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO3_LOW,
- .irq_high = MX51_MXC_INT_GPIO3_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
- },
- {
- .chip.label = "gpio-3",
- .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO4_LOW,
- .irq_high = MX51_MXC_INT_GPIO4_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
- },
- {
- .chip.label = "gpio-4",
- .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
- .irq = MX53_INT_GPIO5_LOW,
- .irq_high = MX53_INT_GPIO5_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
- },
- {
- .chip.label = "gpio-5",
- .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
- .irq = MX53_INT_GPIO6_LOW,
- .irq_high = MX53_INT_GPIO6_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
- },
- {
- .chip.label = "gpio-6",
- .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
- .irq = MX53_INT_GPIO7_LOW,
- .irq_high = MX53_INT_GPIO7_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
- },
-};
-
-int __init imx51_register_gpios(void)
-{
- return mxc_gpio_init(mxc_gpio_ports, 4);
-}
-
-int __init imx53_register_gpios(void)
-{
- return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
index b9c363b514a9..77e374c726fa 100644
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ b/arch/arm/mach-mx5/mm-mx50.c
@@ -26,7 +26,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
/*
@@ -56,17 +55,18 @@ void __init imx50_init_early(void)
mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
}
-static struct mxc_gpio_port imx50_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-};
-
void __init mx50_init_irq(void)
{
tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
- mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports));
+}
+
+void __init imx50_soc_init(void)
+{
+ /* i.mx50 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+ mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index ff557301b42b..665843d6c2b2 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -69,8 +69,6 @@ void __init imx53_init_early(void)
mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
}
-int imx51_register_gpios(void);
-
void __init mx51_init_irq(void)
{
unsigned long tzic_addr;
@@ -86,11 +84,8 @@ void __init mx51_init_irq(void)
panic("unable to map TZIC interrupt controller\n");
tzic_init_irq(tzic_virt);
- imx51_register_gpios();
}
-int imx53_register_gpios(void);
-
void __init mx53_init_irq(void)
{
unsigned long tzic_addr;
@@ -103,5 +98,25 @@ void __init mx53_init_irq(void)
panic("unable to map TZIC interrupt controller\n");
tzic_init_irq(tzic_virt);
- imx53_register_gpios();
+}
+
+void __init imx51_soc_init(void)
+{
+ /* i.mx51 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+}
+
+void __init imx53_soc_init(void)
+{
+ /* i.mx53 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+ mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+ mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
}
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 58e892376bf2..6c38262a3aaa 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,5 +1,5 @@
# Common support
-obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index cfdb6b284702..fe3e847930c9 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -88,3 +88,14 @@ int __init mxs_add_amba_device(const struct amba_device *dev)
return amba_device_register(adev, &iomem_resource);
}
+
+struct device mxs_apbh_bus = {
+ .init_name = "mxs_apbh",
+ .parent = &platform_bus,
+};
+
+static int __init mxs_device_init(void)
+{
+ return device_register(&mxs_apbh_bus);
+}
+core_initcall(mxs_device_init);
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 324f2824d38d..351915c683ff 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
+obj-y += platform-gpio-mxs.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
new file mode 100644
index 000000000000..ed0885e414e0
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxs_add_gpio(
+ int id, resource_size_t iobase, int irq)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return platform_device_register_resndata(&mxs_apbh_bus,
+ "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0);
+}
+
+static int __init mxs_add_mxs_gpio(void)
+{
+ if (cpu_is_mx23()) {
+ mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
+ mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
+ mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
+ }
+
+ if (cpu_is_mx28()) {
+ mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
+ mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
+ mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
+ mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
+ mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
+ }
+
+ return 0;
+}
+postcore_initcall(mxs_add_mxs_gpio);
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
deleted file mode 100644
index 2c950fef71a8..000000000000
--- a/arch/arm/mach-mxs/gpio.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <asm-generic/bug.h>
-
-#include "gpio.h"
-
-static struct mxs_gpio_port *mxs_gpio_ports;
-static int gpio_table_size;
-
-#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
-#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
-#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
-#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
-#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
-#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
-#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
-#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
-
-#define GPIO_INT_FALL_EDGE 0x0
-#define GPIO_INT_LOW_LEV 0x1
-#define GPIO_INT_RISE_EDGE 0x2
-#define GPIO_INT_HIGH_LEV 0x3
-#define GPIO_INT_LEV_MASK (1 << 0)
-#define GPIO_INT_POL_MASK (1 << 1)
-
-/* Note: This driver assumes 32 GPIOs are handled in one register */
-
-static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
-{
- __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
-}
-
-static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
- int enable)
-{
- if (enable) {
- __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
- __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
- } else {
- __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
- }
-}
-
-static void mxs_gpio_ack_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
-}
-
-static void mxs_gpio_mask_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
-}
-
-static void mxs_gpio_unmask_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
-
-static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
-{
- u32 gpio = irq_to_gpio(d->irq);
- u32 pin_mask = 1 << (gpio & 31);
- struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
- void __iomem *pin_addr;
- int edge;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- edge = GPIO_INT_RISE_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- edge = GPIO_INT_FALL_EDGE;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- edge = GPIO_INT_LOW_LEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- edge = GPIO_INT_HIGH_LEV;
- break;
- default:
- return -EINVAL;
- }
-
- /* set level or edge */
- pin_addr = port->base + PINCTRL_IRQLEV(port->id);
- if (edge & GPIO_INT_LEV_MASK)
- __mxs_setl(pin_mask, pin_addr);
- else
- __mxs_clrl(pin_mask, pin_addr);
-
- /* set polarity */
- pin_addr = port->base + PINCTRL_IRQPOL(port->id);
- if (edge & GPIO_INT_POL_MASK)
- __mxs_setl(pin_mask, pin_addr);
- else
- __mxs_clrl(pin_mask, pin_addr);
-
- clear_gpio_irqstatus(port, gpio & 0x1f);
-
- return 0;
-}
-
-/* MXS has one interrupt *per* gpio port */
-static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
- u32 irq_stat;
- struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq);
- u32 gpio_irq_no_base = port->virtual_irq_start;
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
- __raw_readl(port->base + PINCTRL_IRQEN(port->id));
-
- while (irq_stat != 0) {
- int irqoffset = fls(irq_stat) - 1;
- generic_handle_irq(gpio_irq_no_base + irqoffset);
- irq_stat &= ~(1 << irqoffset);
- }
-}
-
-/*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param irq interrupt source number
- * @param enable enable as wake-up if equal to non-zero
- * @return This function returns 0 on success.
- */
-static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
-{
- u32 gpio = irq_to_gpio(d->irq);
- u32 gpio_idx = gpio & 0x1f;
- struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
-
- if (enable) {
- if (port->irq_high && (gpio_idx >= 16))
- enable_irq_wake(port->irq_high);
- else
- enable_irq_wake(port->irq);
- } else {
- if (port->irq_high && (gpio_idx >= 16))
- disable_irq_wake(port->irq_high);
- else
- disable_irq_wake(port->irq);
- }
-
- return 0;
-}
-
-static struct irq_chip gpio_irq_chip = {
- .name = "mxs gpio",
- .irq_ack = mxs_gpio_ack_irq,
- .irq_mask = mxs_gpio_mask_irq,
- .irq_unmask = mxs_gpio_unmask_irq,
- .irq_set_type = mxs_gpio_set_irq_type,
- .irq_set_wake = mxs_gpio_set_wake_irq,
-};
-
-static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
- int dir)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
- void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
-
- if (dir)
- __mxs_setl(1 << offset, pin_addr);
- else
- __mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
-
- return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
-}
-
-static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
- void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
-
- if (value)
- __mxs_setl(1 << offset, pin_addr);
- else
- __mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct mxs_gpio_port *port =
- container_of(chip, struct mxs_gpio_port, chip);
-
- return port->virtual_irq_start + offset;
-}
-
-static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- mxs_set_gpio_direction(chip, offset, 0);
- return 0;
-}
-
-static int mxs_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- mxs_gpio_set(chip, offset, value);
- mxs_set_gpio_direction(chip, offset, 1);
- return 0;
-}
-
-int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
-{
- int i, j;
-
- /* save for local usage */
- mxs_gpio_ports = port;
- gpio_table_size = cnt;
-
- pr_info("MXS GPIO hardware\n");
-
- for (i = 0; i < cnt; i++) {
- /* disable the interrupt and clear the status */
- __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
- __raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
-
- /* clear address has to be used to clear IRQSTAT bits */
- __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
-
- for (j = port[i].virtual_irq_start;
- j < port[i].virtual_irq_start + 32; j++) {
- irq_set_chip_and_handler(j, &gpio_irq_chip,
- handle_level_irq);
- set_irq_flags(j, IRQF_VALID);
- }
-
- /* setup one handler for each entry */
- irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler);
- irq_set_handler_data(port[i].irq, &port[i]);
-
- /* register gpio chip */
- port[i].chip.direction_input = mxs_gpio_direction_input;
- port[i].chip.direction_output = mxs_gpio_direction_output;
- port[i].chip.get = mxs_gpio_get;
- port[i].chip.set = mxs_gpio_set;
- port[i].chip.to_irq = mxs_gpio_to_irq;
- port[i].chip.base = i * 32;
- port[i].chip.ngpio = 32;
-
- /* its a serious configuration bug when it fails */
- BUG_ON(gpiochip_add(&port[i].chip) < 0);
- }
-
- return 0;
-}
-
-#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR)
-#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR)
-
-#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \
- { \
- .chip.label = "gpio-" #_id, \
- .id = _id, \
- .irq = _irq, \
- .base = _base, \
- .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \
- }
-
-#ifdef CONFIG_SOC_IMX23
-static struct mxs_gpio_port mx23_gpio_ports[] = {
- DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0),
- DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1),
- DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2),
-};
-
-int __init mx23_register_gpios(void)
-{
- return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-static struct mxs_gpio_port mx28_gpio_ports[] = {
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3),
- DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4),
-};
-
-int __init mx28_register_gpios(void)
-{
- return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports));
-}
-#endif
diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h
deleted file mode 100644
index 005bb06630b1..000000000000
--- a/arch/arm/mach-mxs/gpio.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MXS_GPIO_H__
-#define __MXS_GPIO_H__
-
-struct mxs_gpio_port {
- void __iomem *base;
- int id;
- int irq;
- int irq_high;
- int virtual_irq_start;
- struct gpio_chip chip;
-};
-
-int mxs_gpio_init(struct mxs_gpio_port*, int);
-
-#endif /* __MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 7a37469ed5bf..812d7a813a78 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -11,6 +11,8 @@
#include <linux/init.h>
#include <linux/amba/bus.h>
+extern struct device mxs_apbh_bus;
+
struct platform_device *mxs_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index eacdc6b0e70a..56767a5cce0e 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -26,7 +26,6 @@
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
-#include "gpio.h"
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c
index 5148cd64a6b7..1b2345ac1a87 100644
--- a/arch/arm/mach-mxs/mm-mx23.c
+++ b/arch/arm/mach-mxs/mm-mx23.c
@@ -41,5 +41,4 @@ void __init mx23_map_io(void)
void __init mx23_init_irq(void)
{
icoll_init_irq();
- mx23_register_gpios();
}
diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c
index 7e4cea32ebc6..b6e18ddb92c0 100644
--- a/arch/arm/mach-mxs/mm-mx28.c
+++ b/arch/arm/mach-mxs/mm-mx28.c
@@ -41,5 +41,4 @@ void __init mx28_map_io(void)
void __init mx28_init_irq(void)
{
icoll_init_irq();
- mx28_register_gpios();
}
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 364137c2042c..399da4ce017b 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -34,11 +34,22 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
+ .revision = USHRT_MAX,
+ .direction = OMAP_MPUIO_IO_CNTL,
+ .datain = OMAP_MPUIO_INPUT_LATCH,
+ .dataout = OMAP_MPUIO_OUTPUT,
+ .irqstatus = OMAP_MPUIO_GPIO_INT,
+ .irqenable = OMAP_MPUIO_GPIO_MASKIT,
+ .irqenable_inv = true,
+};
+
static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 16,
.bank_stride = 1,
+ .regs = &omap15xx_mpuio_regs,
};
static struct platform_device omap15xx_mpu_gpio = {
@@ -64,10 +75,21 @@ static struct __initdata resource omap15xx_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
+ .revision = USHRT_MAX,
+ .direction = OMAP1510_GPIO_DIR_CONTROL,
+ .datain = OMAP1510_GPIO_DATA_INPUT,
+ .dataout = OMAP1510_GPIO_DATA_OUTPUT,
+ .irqstatus = OMAP1510_GPIO_INT_STATUS,
+ .irqenable = OMAP1510_GPIO_INT_MASK,
+ .irqenable_inv = true,
+};
+
static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_1510,
.bank_width = 16,
+ .regs = &omap15xx_gpio_regs,
};
static struct platform_device omap15xx_gpio = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 293a246e2824..0f399bd0e70e 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -37,11 +37,22 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
+ .revision = USHRT_MAX,
+ .direction = OMAP_MPUIO_IO_CNTL,
+ .datain = OMAP_MPUIO_INPUT_LATCH,
+ .dataout = OMAP_MPUIO_OUTPUT,
+ .irqstatus = OMAP_MPUIO_GPIO_INT,
+ .irqenable = OMAP_MPUIO_GPIO_MASKIT,
+ .irqenable_inv = true,
+};
+
static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 16,
.bank_stride = 1,
+ .regs = &omap16xx_mpuio_regs,
};
static struct platform_device omap16xx_mpu_gpio = {
@@ -67,10 +78,24 @@ static struct __initdata resource omap16xx_gpio1_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
+ .revision = OMAP1610_GPIO_REVISION,
+ .direction = OMAP1610_GPIO_DIRECTION,
+ .set_dataout = OMAP1610_GPIO_SET_DATAOUT,
+ .clr_dataout = OMAP1610_GPIO_CLEAR_DATAOUT,
+ .datain = OMAP1610_GPIO_DATAIN,
+ .dataout = OMAP1610_GPIO_DATAOUT,
+ .irqstatus = OMAP1610_GPIO_IRQSTATUS1,
+ .irqenable = OMAP1610_GPIO_IRQENABLE1,
+ .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1,
+ .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1,
+};
+
static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct platform_device omap16xx_gpio1 = {
@@ -100,6 +125,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 16,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct platform_device omap16xx_gpio2 = {
@@ -129,6 +155,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct platform_device omap16xx_gpio3 = {
@@ -158,6 +185,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 48,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
+ .regs = &omap16xx_gpio_regs,
};
static struct platform_device omap16xx_gpio4 = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index c6ad248d63a6..5ab63eab0ff5 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -39,11 +39,22 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
+ .revision = USHRT_MAX,
+ .direction = OMAP_MPUIO_IO_CNTL / 2,
+ .datain = OMAP_MPUIO_INPUT_LATCH / 2,
+ .dataout = OMAP_MPUIO_OUTPUT / 2,
+ .irqstatus = OMAP_MPUIO_GPIO_INT / 2,
+ .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2,
+ .irqenable_inv = true,
+};
+
static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 32,
.bank_stride = 2,
+ .regs = &omap7xx_mpuio_regs,
};
static struct platform_device omap7xx_mpu_gpio = {
@@ -69,10 +80,21 @@ static struct __initdata resource omap7xx_gpio1_resources[] = {
},
};
+static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
+ .revision = USHRT_MAX,
+ .direction = OMAP7XX_GPIO_DIR_CONTROL,
+ .datain = OMAP7XX_GPIO_DATA_INPUT,
+ .dataout = OMAP7XX_GPIO_DATA_OUTPUT,
+ .irqstatus = OMAP7XX_GPIO_INT_STATUS,
+ .irqenable = OMAP7XX_GPIO_INT_MASK,
+ .irqenable_inv = true,
+};
+
static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct platform_device omap7xx_gpio1 = {
@@ -102,6 +124,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct platform_device omap7xx_gpio2 = {
@@ -131,6 +154,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 64,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct platform_device omap7xx_gpio3 = {
@@ -160,6 +184,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 96,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct platform_device omap7xx_gpio4 = {
@@ -189,6 +214,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
.virtual_irq_start = IH_GPIO_BASE + 128,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct platform_device omap7xx_gpio5 = {
@@ -218,6 +244,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
.virtual_irq_start = IH_GPIO_BASE + 160,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
+ .regs = &omap7xx_gpio_regs,
};
static struct platform_device omap7xx_gpio6 = {
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9529842ae054..9a46d7773a48 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -61,13 +61,45 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
pdata->dbck_flag = dev_attr->dbck_flag;
pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
+ pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("gpio%d: Memory allocation failed\n", id);
+ return -ENOMEM;
+ }
+
switch (oh->class->rev) {
case 0:
case 1:
pdata->bank_type = METHOD_GPIO_24XX;
+ pdata->regs->revision = OMAP24XX_GPIO_REVISION;
+ pdata->regs->direction = OMAP24XX_GPIO_OE;
+ pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
+ pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
+ pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
+ pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
+ pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
+ pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
+ pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
+ pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
+ pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
+ pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
+ pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
break;
case 2:
pdata->bank_type = METHOD_GPIO_44XX;
+ pdata->regs->revision = OMAP4_GPIO_REVISION;
+ pdata->regs->direction = OMAP4_GPIO_OE;
+ pdata->regs->datain = OMAP4_GPIO_DATAIN;
+ pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
+ pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
+ pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
+ pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
+ pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
+ pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+ pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+ pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
+ pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
+ pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
break;
default:
WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 823c703e573c..ed58ef9019b5 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -4,7 +4,6 @@ obj-y += io.o
obj-y += irq.o
obj-y += clock.o
obj-y += timer.o
-obj-y += gpio.o
obj-y += pinmux.o
obj-y += powergate.o
obj-y += fuse.o
diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c
deleted file mode 100644
index 919d63837736..000000000000
--- a/arch/arm/mach-tegra/gpio.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * arch/arm/mach-tegra/gpio.c
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#define GPIO_BANK(x) ((x) >> 5)
-#define GPIO_PORT(x) (((x) >> 3) & 0x3)
-#define GPIO_BIT(x) ((x) & 0x7)
-
-#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \
- GPIO_BANK(x) * 0x80 + \
- GPIO_PORT(x) * 4)
-
-#define GPIO_CNF(x) (GPIO_REG(x) + 0x00)
-#define GPIO_OE(x) (GPIO_REG(x) + 0x10)
-#define GPIO_OUT(x) (GPIO_REG(x) + 0X20)
-#define GPIO_IN(x) (GPIO_REG(x) + 0x30)
-#define GPIO_INT_STA(x) (GPIO_REG(x) + 0x40)
-#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50)
-#define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60)
-#define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70)
-
-#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800)
-#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810)
-#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820)
-#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840)
-#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850)
-#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860)
-
-#define GPIO_INT_LVL_MASK 0x010101
-#define GPIO_INT_LVL_EDGE_RISING 0x000101
-#define GPIO_INT_LVL_EDGE_FALLING 0x000100
-#define GPIO_INT_LVL_EDGE_BOTH 0x010100
-#define GPIO_INT_LVL_LEVEL_HIGH 0x000001
-#define GPIO_INT_LVL_LEVEL_LOW 0x000000
-
-struct tegra_gpio_bank {
- int bank;
- int irq;
- spinlock_t lvl_lock[4];
-#ifdef CONFIG_PM
- u32 cnf[4];
- u32 out[4];
- u32 oe[4];
- u32 int_enb[4];
- u32 int_lvl[4];
-#endif
-};
-
-
-static struct tegra_gpio_bank tegra_gpio_banks[] = {
- {.bank = 0, .irq = INT_GPIO1},
- {.bank = 1, .irq = INT_GPIO2},
- {.bank = 2, .irq = INT_GPIO3},
- {.bank = 3, .irq = INT_GPIO4},
- {.bank = 4, .irq = INT_GPIO5},
- {.bank = 5, .irq = INT_GPIO6},
- {.bank = 6, .irq = INT_GPIO7},
-};
-
-static int tegra_gpio_compose(int bank, int port, int bit)
-{
- return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7);
-}
-
-static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
-{
- u32 val;
-
- val = 0x100 << GPIO_BIT(gpio);
- if (value)
- val |= 1 << GPIO_BIT(gpio);
- __raw_writel(val, reg);
-}
-
-void tegra_gpio_enable(int gpio)
-{
- tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
-}
-
-void tegra_gpio_disable(int gpio)
-{
- tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
-}
-
-static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value);
-}
-
-static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
-}
-
-static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0);
- return 0;
-}
-
-static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- tegra_gpio_set(chip, offset, value);
- tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1);
- return 0;
-}
-
-
-
-static struct gpio_chip tegra_gpio_chip = {
- .label = "tegra-gpio",
- .direction_input = tegra_gpio_direction_input,
- .get = tegra_gpio_get,
- .direction_output = tegra_gpio_direction_output,
- .set = tegra_gpio_set,
- .base = 0,
- .ngpio = TEGRA_NR_GPIOS,
-};
-
-static void tegra_gpio_irq_ack(struct irq_data *d)
-{
- int gpio = d->irq - INT_GPIO_BASE;
-
- __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
-}
-
-static void tegra_gpio_irq_mask(struct irq_data *d)
-{
- int gpio = d->irq - INT_GPIO_BASE;
-
- tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0);
-}
-
-static void tegra_gpio_irq_unmask(struct irq_data *d)
-{
- int gpio = d->irq - INT_GPIO_BASE;
-
- tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1);
-}
-
-static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
-{
- int gpio = d->irq - INT_GPIO_BASE;
- struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
- int port = GPIO_PORT(gpio);
- int lvl_type;
- int val;
- unsigned long flags;
-
- switch (type & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_EDGE_RISING:
- lvl_type = GPIO_INT_LVL_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- lvl_type = GPIO_INT_LVL_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- lvl_type = GPIO_INT_LVL_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- lvl_type = GPIO_INT_LVL_LEVEL_HIGH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- lvl_type = GPIO_INT_LVL_LEVEL_LOW;
- break;
-
- default:
- return -EINVAL;
- }
-
- spin_lock_irqsave(&bank->lvl_lock[port], flags);
-
- val = __raw_readl(GPIO_INT_LVL(gpio));
- val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
- val |= lvl_type << GPIO_BIT(gpio);
- __raw_writel(val, GPIO_INT_LVL(gpio));
-
- spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
-
- if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
- __irq_set_handler_locked(d->irq, handle_level_irq);
- else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
- __irq_set_handler_locked(d->irq, handle_edge_irq);
-
- return 0;
-}
-
-static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- struct tegra_gpio_bank *bank;
- int port;
- int pin;
- int unmasked = 0;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- chained_irq_enter(chip, desc);
-
- bank = irq_get_handler_data(irq);
-
- for (port = 0; port < 4; port++) {
- int gpio = tegra_gpio_compose(bank->bank, port, 0);
- unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
- __raw_readl(GPIO_INT_ENB(gpio));
- u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
-
- for_each_set_bit(pin, &sta, 8) {
- __raw_writel(1 << pin, GPIO_INT_CLR(gpio));
-
- /* if gpio is edge triggered, clear condition
- * before executing the hander so that we don't
- * miss edges
- */
- if (lvl & (0x100 << pin)) {
- unmasked = 1;
- chained_irq_exit(chip, desc);
- }
-
- generic_handle_irq(gpio_to_irq(gpio + pin));
- }
- }
-
- if (!unmasked)
- chained_irq_exit(chip, desc);
-
-}
-
-#ifdef CONFIG_PM
-void tegra_gpio_resume(void)
-{
- unsigned long flags;
- int b;
- int p;
-
- local_irq_save(flags);
-
- for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
- struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
-
- for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
- unsigned int gpio = (b<<5) | (p<<3);
- __raw_writel(bank->cnf[p], GPIO_CNF(gpio));
- __raw_writel(bank->out[p], GPIO_OUT(gpio));
- __raw_writel(bank->oe[p], GPIO_OE(gpio));
- __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
- __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
- }
- }
-
- local_irq_restore(flags);
-}
-
-void tegra_gpio_suspend(void)
-{
- unsigned long flags;
- int b;
- int p;
-
- local_irq_save(flags);
- for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
- struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
-
- for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
- unsigned int gpio = (b<<5) | (p<<3);
- bank->cnf[p] = __raw_readl(GPIO_CNF(gpio));
- bank->out[p] = __raw_readl(GPIO_OUT(gpio));
- bank->oe[p] = __raw_readl(GPIO_OE(gpio));
- bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio));
- bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio));
- }
- }
- local_irq_restore(flags);
-}
-
-static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable)
-{
- struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
- return irq_set_irq_wake(bank->irq, enable);
-}
-#endif
-
-static struct irq_chip tegra_gpio_irq_chip = {
- .name = "GPIO",
- .irq_ack = tegra_gpio_irq_ack,
- .irq_mask = tegra_gpio_irq_mask,
- .irq_unmask = tegra_gpio_irq_unmask,
- .irq_set_type = tegra_gpio_irq_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = tegra_gpio_wake_enable,
-#endif
-};
-
-
-/* This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-static int __init tegra_gpio_init(void)
-{
- struct tegra_gpio_bank *bank;
- int i;
- int j;
-
- for (i = 0; i < 7; i++) {
- for (j = 0; j < 4; j++) {
- int gpio = tegra_gpio_compose(i, j, 0);
- __raw_writel(0x00, GPIO_INT_ENB(gpio));
- }
- }
-
- gpiochip_add(&tegra_gpio_chip);
-
- for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
- bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
-
- irq_set_lockdep_class(i, &gpio_lock_class);
- irq_set_chip_data(i, bank);
- irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
- handle_simple_irq);
- set_irq_flags(i, IRQF_VALID);
- }
-
- for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
- bank = &tegra_gpio_banks[i];
-
- irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler);
- irq_set_handler_data(bank->irq, bank);
-
- for (j = 0; j < 4; j++)
- spin_lock_init(&bank->lvl_lock[j]);
- }
-
- return 0;
-}
-
-postcore_initcall(tegra_gpio_init);
-
-void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
-{
- int i;
-
- for (i = 0; i < num; i++) {
- int gpio = table[i].gpio;
-
- if (table[i].enable)
- tegra_gpio_enable(gpio);
- else
- tegra_gpio_disable(gpio);
- }
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int dbg_gpio_show(struct seq_file *s, void *unused)
-{
- int i;
- int j;
-
- for (i = 0; i < 7; i++) {
- for (j = 0; j < 4; j++) {
- int gpio = tegra_gpio_compose(i, j, 0);
- seq_printf(s,
- "%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
- i, j,
- __raw_readl(GPIO_CNF(gpio)),
- __raw_readl(GPIO_OE(gpio)),
- __raw_readl(GPIO_OUT(gpio)),
- __raw_readl(GPIO_IN(gpio)),
- __raw_readl(GPIO_INT_STA(gpio)),
- __raw_readl(GPIO_INT_ENB(gpio)),
- __raw_readl(GPIO_INT_LVL(gpio)));
- }
- }
- return 0;
-}
-
-static int dbg_gpio_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dbg_gpio_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
- .open = dbg_gpio_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init tegra_gpio_debuginit(void)
-{
- (void) debugfs_create_file("tegra_gpio", S_IRUGO,
- NULL, NULL, &debug_fops);
- return 0;
-}
-late_initcall(tegra_gpio_debuginit);
-#endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index a1387875a491..d53c35fe2ea7 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o
+obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
# MX51 uses the TZIC interrupt controller, older platforms use AVIC
obj-$(CONFIG_MXC_TZIC) += tzic.o
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index eee1b6096a08..fb166b20f60f 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -89,3 +89,14 @@ err:
return pdev;
}
+
+struct device mxc_aips_bus = {
+ .init_name = "mxc_aips",
+ .parent = &platform_bus,
+};
+
+static int __init mxc_device_init(void)
+{
+ return device_register(&mxc_aips_bus);
+}
+core_initcall(mxc_device_init);
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index ad2922acf480..b41bf972b54b 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-y += platform-gpio-mxc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
new file mode 100644
index 000000000000..a7919a241032
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxc_register_gpio(char *name, int id,
+ resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = irq_high,
+ .end = irq_high,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return platform_device_register_resndata(&mxc_aips_bus,
+ name, id, res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
deleted file mode 100644
index 6cd6d7f686f6..000000000000
--- a/arch/arm/plat-mxc/gpio.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <asm-generic/bug.h>
-
-static struct mxc_gpio_port *mxc_gpio_ports;
-static int gpio_table_size;
-
-#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2())
-
-#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
-#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
-#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
-#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
-#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
-#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
-#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
-
-#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
-#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
-#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
-#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
-#define GPIO_INT_NONE 0x4
-
-/* Note: This driver assumes 32 GPIOs are handled in one register */
-
-static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
-{
- __raw_writel(1 << index, port->base + GPIO_ISR);
-}
-
-static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
- int enable)
-{
- u32 l;
-
- l = __raw_readl(port->base + GPIO_IMR);
- l = (l & (~(1 << index))) | (!!enable << index);
- __raw_writel(l, port->base + GPIO_IMR);
-}
-
-static void gpio_ack_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
- u32 gpio = irq_to_gpio(d->irq);
- _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
-}
-
-static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
-
-static int gpio_set_irq_type(struct irq_data *d, u32 type)
-{
- u32 gpio = irq_to_gpio(d->irq);
- struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
- u32 bit, val;
- int edge;
- void __iomem *reg = port->base;
-
- port->both_edges &= ~(1 << (gpio & 31));
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- edge = GPIO_INT_RISE_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- edge = GPIO_INT_FALL_EDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- val = mxc_gpio_get(&port->chip, gpio & 31);
- if (val) {
- edge = GPIO_INT_LOW_LEV;
- pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
- } else {
- edge = GPIO_INT_HIGH_LEV;
- pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
- }
- port->both_edges |= 1 << (gpio & 31);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- edge = GPIO_INT_LOW_LEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- edge = GPIO_INT_HIGH_LEV;
- break;
- default:
- return -EINVAL;
- }
-
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
- val = __raw_readl(reg) & ~(0x3 << (bit << 1));
- __raw_writel(val | (edge << (bit << 1)), reg);
- _clear_gpio_irqstatus(port, gpio & 0x1f);
-
- return 0;
-}
-
-static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
-{
- void __iomem *reg = port->base;
- u32 bit, val;
- int edge;
-
- reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
- bit = gpio & 0xf;
- val = __raw_readl(reg);
- edge = (val >> (bit << 1)) & 3;
- val &= ~(0x3 << (bit << 1));
- if (edge == GPIO_INT_HIGH_LEV) {
- edge = GPIO_INT_LOW_LEV;
- pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
- } else if (edge == GPIO_INT_LOW_LEV) {
- edge = GPIO_INT_HIGH_LEV;
- pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
- } else {
- pr_err("mxc: invalid configuration for GPIO %d: %x\n",
- gpio, edge);
- return;
- }
- __raw_writel(val | (edge << (bit << 1)), reg);
-}
-
-/* handle 32 interrupts in one status register */
-static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
-{
- u32 gpio_irq_no_base = port->virtual_irq_start;
-
- while (irq_stat != 0) {
- int irqoffset = fls(irq_stat) - 1;
-
- if (port->both_edges & (1 << irqoffset))
- mxc_flip_edge(port, irqoffset);
-
- generic_handle_irq(gpio_irq_no_base + irqoffset);
-
- irq_stat &= ~(1 << irqoffset);
- }
-}
-
-/* MX1 and MX3 has one interrupt *per* gpio port */
-static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
- u32 irq_stat;
- struct mxc_gpio_port *port = irq_get_handler_data(irq);
-
- irq_stat = __raw_readl(port->base + GPIO_ISR) &
- __raw_readl(port->base + GPIO_IMR);
-
- mxc_gpio_irq_handler(port, irq_stat);
-}
-
-/* MX2 has one interrupt *for all* gpio ports */
-static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
- int i;
- u32 irq_msk, irq_stat;
- struct mxc_gpio_port *port = irq_get_handler_data(irq);
-
- /* walk through all interrupt status registers */
- for (i = 0; i < gpio_table_size; i++) {
- irq_msk = __raw_readl(port[i].base + GPIO_IMR);
- if (!irq_msk)
- continue;
-
- irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
- if (irq_stat)
- mxc_gpio_irq_handler(&port[i], irq_stat);
- }
-}
-
-/*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param irq interrupt source number
- * @param enable enable as wake-up if equal to non-zero
- * @return This function returns 0 on success.
- */
-static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
-{
- u32 gpio = irq_to_gpio(d->irq);
- u32 gpio_idx = gpio & 0x1F;
- struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
-
- if (enable) {
- if (port->irq_high && (gpio_idx >= 16))
- enable_irq_wake(port->irq_high);
- else
- enable_irq_wake(port->irq);
- } else {
- if (port->irq_high && (gpio_idx >= 16))
- disable_irq_wake(port->irq_high);
- else
- disable_irq_wake(port->irq);
- }
-
- return 0;
-}
-
-static struct irq_chip gpio_irq_chip = {
- .name = "GPIO",
- .irq_ack = gpio_ack_irq,
- .irq_mask = gpio_mask_irq,
- .irq_unmask = gpio_unmask_irq,
- .irq_set_type = gpio_set_irq_type,
- .irq_set_wake = gpio_set_wake_irq,
-};
-
-static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
- int dir)
-{
- struct mxc_gpio_port *port =
- container_of(chip, struct mxc_gpio_port, chip);
- u32 l;
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
- l = __raw_readl(port->base + GPIO_GDIR);
- if (dir)
- l |= 1 << offset;
- else
- l &= ~(1 << offset);
- __raw_writel(l, port->base + GPIO_GDIR);
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- struct mxc_gpio_port *port =
- container_of(chip, struct mxc_gpio_port, chip);
- void __iomem *reg = port->base + GPIO_DR;
- u32 l;
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
- l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
- __raw_writel(l, reg);
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct mxc_gpio_port *port =
- container_of(chip, struct mxc_gpio_port, chip);
-
- return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
-}
-
-static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- _set_gpio_direction(chip, offset, 0);
- return 0;
-}
-
-static int mxc_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- mxc_gpio_set(chip, offset, value);
- _set_gpio_direction(chip, offset, 1);
- return 0;
-}
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
-{
- int i, j;
-
- /* save for local usage */
- mxc_gpio_ports = port;
- gpio_table_size = cnt;
-
- printk(KERN_INFO "MXC GPIO hardware\n");
-
- for (i = 0; i < cnt; i++) {
- /* disable the interrupt and clear the status */
- __raw_writel(0, port[i].base + GPIO_IMR);
- __raw_writel(~0, port[i].base + GPIO_ISR);
- for (j = port[i].virtual_irq_start;
- j < port[i].virtual_irq_start + 32; j++) {
- irq_set_lockdep_class(j, &gpio_lock_class);
- irq_set_chip_and_handler(j, &gpio_irq_chip,
- handle_level_irq);
- set_irq_flags(j, IRQF_VALID);
- }
-
- /* register gpio chip */
- port[i].chip.direction_input = mxc_gpio_direction_input;
- port[i].chip.direction_output = mxc_gpio_direction_output;
- port[i].chip.get = mxc_gpio_get;
- port[i].chip.set = mxc_gpio_set;
- port[i].chip.base = i * 32;
- port[i].chip.ngpio = 32;
-
- spin_lock_init(&port[i].lock);
-
- /* its a serious configuration bug when it fails */
- BUG_ON( gpiochip_add(&port[i].chip) < 0 );
-
- if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
- /* setup one handler for each entry */
- irq_set_chained_handler(port[i].irq,
- mx3_gpio_irq_handler);
- irq_set_handler_data(port[i].irq, &port[i]);
- if (port[i].irq_high) {
- /* setup handler for GPIO 16 to 31 */
- irq_set_chained_handler(port[i].irq_high,
- mx3_gpio_irq_handler);
- irq_set_handler_data(port[i].irq_high,
- &port[i]);
- }
- }
- }
-
- if (cpu_is_mx2()) {
- /* setup one handler for all GPIO interrupts */
- irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler);
- irq_set_handler_data(port[0].irq, port);
- }
-
- return 0;
-}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index da7991832af6..4e3d97890d69 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -43,6 +43,15 @@ extern void mx35_init_irq(void);
extern void mx50_init_irq(void);
extern void mx51_init_irq(void);
extern void mx53_init_irq(void);
+extern void imx1_soc_init(void);
+extern void imx21_soc_init(void);
+extern void imx25_soc_init(void);
+extern void imx27_soc_init(void);
+extern void imx31_soc_init(void);
+extern void imx35_soc_init(void);
+extern void imx50_soc_init(void);
+extern void imx51_soc_init(void);
+extern void imx53_soc_init(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
@@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
-extern int mxc_register_gpios(void);
+extern struct platform_device *mxc_register_gpio(char *name, int id,
+ resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_arch_reset_init(void __iomem *);
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index fa8477337f91..03f626645374 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -10,6 +10,8 @@
#include <linux/platform_device.h>
#include <linux/init.h>
+extern struct device mxc_aips_bus;
+
struct platform_device *imx_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index a2747f12813e..31c820c1b796 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -36,31 +36,4 @@
#define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio))
#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
-struct mxc_gpio_port {
- void __iomem *base;
- int irq;
- int irq_high;
- int virtual_irq_start;
- struct gpio_chip chip;
- u32 both_edges;
- spinlock_t lock;
-};
-
-#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \
- { \
- .chip.label = "gpio-" #_id, \
- .irq = _irq, \
- .irq_high = _irq_high, \
- .base = soc ## _IO_ADDRESS( \
- soc ## _GPIO ## _hwid ## _BASE_ADDR), \
- .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \
- }
-
-#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
-#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \
- DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
-
-int mxc_gpio_init(struct mxc_gpio_port*, int);
-
#endif
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 35c89bcdf758..00e812bbd81d 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_MXC_IRQS_H__
#define __ASM_ARCH_MXC_IRQS_H__
+#include <asm-generic/gpio.h>
+
/*
* SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
*/
@@ -22,30 +24,13 @@
#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
-/* these are ordered by size to support multi-SoC kernels */
-#if defined CONFIG_SOC_IMX53
-#define MXC_GPIO_IRQS (32 * 7)
-#elif defined CONFIG_ARCH_MX2
-#define MXC_GPIO_IRQS (32 * 6)
-#elif defined CONFIG_SOC_IMX50
-#define MXC_GPIO_IRQS (32 * 6)
-#elif defined CONFIG_ARCH_MX1
-#define MXC_GPIO_IRQS (32 * 4)
-#elif defined CONFIG_ARCH_MX25
-#define MXC_GPIO_IRQS (32 * 4)
-#elif defined CONFIG_SOC_IMX51
-#define MXC_GPIO_IRQS (32 * 4)
-#elif defined CONFIG_ARCH_MX3
-#define MXC_GPIO_IRQS (32 * 3)
-#endif
-
/*
* The next 16 interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use
* these. If you need more, increase MXC_BOARD_IRQS, but keep it
* within sensible limits.
*/
-#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS)
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
#define MXC_BOARD_IRQS 80
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index ec97e00cb581..91e8de3db085 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -174,12 +174,32 @@ struct omap_gpio_dev_attr {
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
};
+struct omap_gpio_reg_offs {
+ u16 revision;
+ u16 direction;
+ u16 datain;
+ u16 dataout;
+ u16 set_dataout;
+ u16 clr_dataout;
+ u16 irqstatus;
+ u16 irqstatus2;
+ u16 irqenable;
+ u16 set_irqenable;
+ u16 clr_irqenable;
+ u16 debounce;
+ u16 debounce_en;
+
+ bool irqenable_inv;
+};
+
struct omap_gpio_platform_data {
u16 virtual_irq_start;
int bank_type;
int bank_width; /* GPIO bank width */
int bank_stride; /* Only needed for omap1 MPUIO */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+
+ struct omap_gpio_reg_offs *regs;
};
/* TODO: Analyze removing gpio_bank_count usage from driver code */
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 47ea1be1481b..90f4496017e4 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -55,14 +55,6 @@ config PPC_MPC5200_BUGFIX
It is safe to say 'Y' here
-config PPC_MPC5200_GPIO
- bool "MPC5200 GPIO support"
- depends on PPC_MPC52xx
- select ARCH_REQUIRE_GPIOLIB
- select GENERIC_GPIO
- help
- Enable gpiolib support for mpc5200 based boards
-
config PPC_MPC5200_LPBFIFO
tristate "MPC5200 LocalPlus bus FIFO driver"
depends on PPC_MPC52xx
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index 2bc8cd0c5cfc..4e62486791e9 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -14,5 +14,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o
endif
-obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o
obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
deleted file mode 100644
index 1757d1db4b51..000000000000
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * MPC52xx gpio driver
- *
- * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/of.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/of_gpio.h>
-#include <linux/io.h>
-#include <linux/of_platform.h>
-
-#include <asm/gpio.h>
-#include <asm/mpc52xx.h>
-#include <sysdev/fsl_soc.h>
-
-static DEFINE_SPINLOCK(gpio_lock);
-
-struct mpc52xx_gpiochip {
- struct of_mm_gpio_chip mmchip;
- unsigned int shadow_dvo;
- unsigned int shadow_gpioe;
- unsigned int shadow_ddr;
-};
-
-/*
- * GPIO LIB API implementation for wakeup GPIOs.
- *
- * There's a maximum of 8 wakeup GPIOs. Which of these are available
- * for use depends on your board setup.
- *
- * 0 -> GPIO_WKUP_7
- * 1 -> GPIO_WKUP_6
- * 2 -> PSC6_1
- * 3 -> PSC6_0
- * 4 -> ETH_17
- * 5 -> PSC3_9
- * 6 -> PSC2_4
- * 7 -> PSC1_4
- *
- */
-static int mpc52xx_wkup_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
- unsigned int ret;
-
- ret = (in_8(&regs->wkup_ival) >> (7 - gpio)) & 1;
-
- pr_debug("%s: gpio: %d ret: %d\n", __func__, gpio, ret);
-
- return ret;
-}
-
-static inline void
-__mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpiochip *chip = container_of(mm_gc,
- struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
-
- if (val)
- chip->shadow_dvo |= 1 << (7 - gpio);
- else
- chip->shadow_dvo &= ~(1 << (7 - gpio));
-
- out_8(&regs->wkup_dvo, chip->shadow_dvo);
-}
-
-static void
-mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- __mpc52xx_wkup_gpio_set(gc, gpio, val);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
-}
-
-static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpiochip *chip = container_of(mm_gc,
- struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- /* set the direction */
- chip->shadow_ddr &= ~(1 << (7 - gpio));
- out_8(&regs->wkup_ddr, chip->shadow_ddr);
-
- /* and enable the pin */
- chip->shadow_gpioe |= 1 << (7 - gpio);
- out_8(&regs->wkup_gpioe, chip->shadow_gpioe);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return 0;
-}
-
-static int
-mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
- struct mpc52xx_gpiochip *chip = container_of(mm_gc,
- struct mpc52xx_gpiochip, mmchip);
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- __mpc52xx_wkup_gpio_set(gc, gpio, val);
-
- /* Then set direction */
- chip->shadow_ddr |= 1 << (7 - gpio);
- out_8(&regs->wkup_ddr, chip->shadow_ddr);
-
- /* Finally enable the pin */
- chip->shadow_gpioe |= 1 << (7 - gpio);
- out_8(&regs->wkup_gpioe, chip->shadow_gpioe);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
-
- return 0;
-}
-
-static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev)
-{
- struct mpc52xx_gpiochip *chip;
- struct mpc52xx_gpio_wkup __iomem *regs;
- struct gpio_chip *gc;
- int ret;
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
- gc = &chip->mmchip.gc;
-
- gc->ngpio = 8;
- gc->direction_input = mpc52xx_wkup_gpio_dir_in;
- gc->direction_output = mpc52xx_wkup_gpio_dir_out;
- gc->get = mpc52xx_wkup_gpio_get;
- gc->set = mpc52xx_wkup_gpio_set;
-
- ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
- if (ret)
- return ret;
-
- regs = chip->mmchip.regs;
- chip->shadow_gpioe = in_8(&regs->wkup_gpioe);
- chip->shadow_ddr = in_8(&regs->wkup_ddr);
- chip->shadow_dvo = in_8(&regs->wkup_dvo);
-
- return 0;
-}
-
-static int mpc52xx_gpiochip_remove(struct platform_device *ofdev)
-{
- return -EBUSY;
-}
-
-static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = {
- {
- .compatible = "fsl,mpc5200-gpio-wkup",
- },
- {}
-};
-
-static struct platform_driver mpc52xx_wkup_gpiochip_driver = {
- .driver = {
- .name = "gpio_wkup",
- .owner = THIS_MODULE,
- .of_match_table = mpc52xx_wkup_gpiochip_match,
- },
- .probe = mpc52xx_wkup_gpiochip_probe,
- .remove = mpc52xx_gpiochip_remove,
-};
-
-/*
- * GPIO LIB API implementation for simple GPIOs
- *
- * There's a maximum of 32 simple GPIOs. Which of these are available
- * for use depends on your board setup.
- * The numbering reflects the bit numbering in the port registers:
- *
- * 0..1 > reserved
- * 2..3 > IRDA
- * 4..7 > ETHR
- * 8..11 > reserved
- * 12..15 > USB
- * 16..17 > reserved
- * 18..23 > PSC3
- * 24..27 > PSC2
- * 28..31 > PSC1
- */
-static int mpc52xx_simple_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
- unsigned int ret;
-
- ret = (in_be32(&regs->simple_ival) >> (31 - gpio)) & 1;
-
- return ret;
-}
-
-static inline void
-__mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpiochip *chip = container_of(mm_gc,
- struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
-
- if (val)
- chip->shadow_dvo |= 1 << (31 - gpio);
- else
- chip->shadow_dvo &= ~(1 << (31 - gpio));
- out_be32(&regs->simple_dvo, chip->shadow_dvo);
-}
-
-static void
-mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- __mpc52xx_simple_gpio_set(gc, gpio, val);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
-}
-
-static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpiochip *chip = container_of(mm_gc,
- struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- /* set the direction */
- chip->shadow_ddr &= ~(1 << (31 - gpio));
- out_be32(&regs->simple_ddr, chip->shadow_ddr);
-
- /* and enable the pin */
- chip->shadow_gpioe |= 1 << (31 - gpio);
- out_be32(&regs->simple_gpioe, chip->shadow_gpioe);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- return 0;
-}
-
-static int
-mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpiochip *chip = container_of(mm_gc,
- struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
- unsigned long flags;
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- /* First set initial value */
- __mpc52xx_simple_gpio_set(gc, gpio, val);
-
- /* Then set direction */
- chip->shadow_ddr |= 1 << (31 - gpio);
- out_be32(&regs->simple_ddr, chip->shadow_ddr);
-
- /* Finally enable the pin */
- chip->shadow_gpioe |= 1 << (31 - gpio);
- out_be32(&regs->simple_gpioe, chip->shadow_gpioe);
-
- spin_unlock_irqrestore(&gpio_lock, flags);
-
- pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
-
- return 0;
-}
-
-static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev)
-{
- struct mpc52xx_gpiochip *chip;
- struct gpio_chip *gc;
- struct mpc52xx_gpio __iomem *regs;
- int ret;
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
- gc = &chip->mmchip.gc;
-
- gc->ngpio = 32;
- gc->direction_input = mpc52xx_simple_gpio_dir_in;
- gc->direction_output = mpc52xx_simple_gpio_dir_out;
- gc->get = mpc52xx_simple_gpio_get;
- gc->set = mpc52xx_simple_gpio_set;
-
- ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
- if (ret)
- return ret;
-
- regs = chip->mmchip.regs;
- chip->shadow_gpioe = in_be32(&regs->simple_gpioe);
- chip->shadow_ddr = in_be32(&regs->simple_ddr);
- chip->shadow_dvo = in_be32(&regs->simple_dvo);
-
- return 0;
-}
-
-static const struct of_device_id mpc52xx_simple_gpiochip_match[] = {
- {
- .compatible = "fsl,mpc5200-gpio",
- },
- {}
-};
-
-static struct platform_driver mpc52xx_simple_gpiochip_driver = {
- .driver = {
- .name = "gpio",
- .owner = THIS_MODULE,
- .of_match_table = mpc52xx_simple_gpiochip_match,
- },
- .probe = mpc52xx_simple_gpiochip_probe,
- .remove = mpc52xx_gpiochip_remove,
-};
-
-static int __init mpc52xx_gpio_init(void)
-{
- if (platform_driver_register(&mpc52xx_wkup_gpiochip_driver))
- printk(KERN_ERR "Unable to register wakeup GPIO driver\n");
-
- if (platform_driver_register(&mpc52xx_simple_gpiochip_driver))
- printk(KERN_ERR "Unable to register simple GPIO driver\n");
-
- return 0;
-}
-
-
-/* Make sure we get initialised before anyone else tries to use us */
-subsys_initcall(mpc52xx_gpio_init);
-
-/* No exit call at the moment as we cannot unregister of gpio chips */
-
-MODULE_DESCRIPTION("Freescale MPC52xx gpio driver");
-MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de");
-MODULE_LICENSE("GPL v2");
-