diff options
Diffstat (limited to 'arch/x86/kernel/setup_32.c')
| -rw-r--r-- | arch/x86/kernel/setup_32.c | 110 |
1 files changed, 89 insertions, 21 deletions
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2b3e5d45176b..2283422af794 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -39,6 +39,7 @@ #include <linux/efi.h> #include <linux/init.h> #include <linux/edd.h> +#include <linux/iscsi_ibft.h> #include <linux/nodemask.h> #include <linux/kexec.h> #include <linux/crash_dump.h> @@ -46,6 +47,7 @@ #include <linux/pfn.h> #include <linux/pci.h> #include <linux/init_ohci1394_dma.h> +#include <linux/kvm_para.h> #include <video/edid.h> @@ -62,8 +64,9 @@ #include <asm/io.h> #include <asm/vmi.h> #include <setup_arch.h> -#include <bios_ebda.h> +#include <asm/bios_ebda.h> #include <asm/cacheflush.h> +#include <asm/processor.h> /* This value is set up by the early boot code to point to the value immediately after the boot time page tables. It contains a *physical* @@ -154,6 +157,8 @@ struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 }; EXPORT_SYMBOL(boot_cpu_data); +unsigned int def_to_bigsmp; + #ifndef CONFIG_X86_PAE unsigned long mmu_cr4_features; #else @@ -189,7 +194,7 @@ EXPORT_SYMBOL(ist_info); extern void early_cpu_init(void); extern int root_mountflags; -unsigned long saved_videomode; +unsigned long saved_video_mode; #define RAMDISK_IMAGE_START_MASK 0x07FF #define RAMDISK_PROMPT_FLAG 0x8000 @@ -227,7 +232,7 @@ static inline void copy_edd(void) } #endif -int __initdata user_defined_memmap = 0; +int __initdata user_defined_memmap; /* * "mem=nopentium" disables the 4MB page tables. @@ -385,19 +390,58 @@ unsigned long __init find_max_low_pfn(void) return max_low_pfn; } +#define BIOS_LOWMEM_KILOBYTES 0x413 + /* - * workaround for Dell systems that neglect to reserve EBDA + * The BIOS places the EBDA/XBDA at the top of conventional + * memory, and usually decreases the reported amount of + * conventional memory (int 0x12) too. This also contains a + * workaround for Dell systems that neglect to reserve EBDA. + * The same workaround also avoids a problem with the AMD768MPX + * chipset: reserve a page before VGA to prevent PCI prefetch + * into it (errata #56). Usually the page is reserved anyways, + * unless you have no PS/2 mouse plugged in. */ static void __init reserve_ebda_region(void) { - unsigned int addr; - addr = get_bios_ebda(); - if (addr) - reserve_bootmem(addr, PAGE_SIZE, BOOTMEM_DEFAULT); + unsigned int lowmem, ebda_addr; + + /* To determine the position of the EBDA and the */ + /* end of conventional memory, we need to look at */ + /* the BIOS data area. In a paravirtual environment */ + /* that area is absent. We'll just have to assume */ + /* that the paravirt case can handle memory setup */ + /* correctly, without our help. */ + if (paravirt_enabled()) + return; + + /* end of low (conventional) memory */ + lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); + lowmem <<= 10; + + /* start of EBDA area */ + ebda_addr = get_bios_ebda(); + + /* Fixup: bios puts an EBDA in the top 64K segment */ + /* of conventional memory, but does not adjust lowmem. */ + if ((lowmem - ebda_addr) <= 0x10000) + lowmem = ebda_addr; + + /* Fixup: bios does not report an EBDA at all. */ + /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ + if ((ebda_addr == 0) && (lowmem >= 0x9f000)) + lowmem = 0x9f000; + + /* Paranoia: should never happen, but... */ + if ((lowmem == 0) || (lowmem >= 0x100000)) + lowmem = 0x9f000; + + /* reserve all memory between lowmem and the 1MB mark */ + reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT); } #ifndef CONFIG_NEED_MULTIPLE_NODES -void __init setup_bootmem_allocator(void); +static void __init setup_bootmem_allocator(void); static unsigned long __init setup_memory(void) { /* @@ -432,7 +476,7 @@ static unsigned long __init setup_memory(void) return max_low_pfn; } -void __init zone_sizes_init(void) +static void __init zone_sizes_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); @@ -617,16 +661,9 @@ void __init setup_bootmem_allocator(void) */ reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT); - /* reserve EBDA region, it's a 4K region */ + /* reserve EBDA region */ reserve_ebda_region(); - /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent - PCI prefetch into it (errata #56). Usually the page is reserved anyways, - unless you have no PS/2 mouse plugged in. */ - if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 6) - reserve_bootmem(0xa0000 - 4096, 4096, BOOTMEM_DEFAULT); - #ifdef CONFIG_SMP /* * But first pinch a few for the stack/trampoline stuff @@ -652,6 +689,8 @@ void __init setup_bootmem_allocator(void) #endif numa_kva_reserve(); reserve_crashkernel(); + + reserve_ibft_region(); } /* @@ -687,6 +726,18 @@ char * __init __attribute__((weak)) memory_setup(void) return machine_specific_memory_setup(); } +#ifdef CONFIG_NUMA +/* + * In the golden day, when everything among i386 and x86_64 will be + * integrated, this will not live here + */ +void *x86_cpu_to_node_map_early_ptr; +int x86_cpu_to_node_map_init[NR_CPUS] = { + [0 ... NR_CPUS-1] = NUMA_NO_NODE +}; +DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE; +#endif + /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -714,7 +765,7 @@ void __init setup_arch(char **cmdline_p) edid_info = boot_params.edid_info; apm_info.bios = boot_params.apm_bios_info; ist_info = boot_params.ist_info; - saved_videomode = boot_params.hdr.vid_mode; + saved_video_mode = boot_params.hdr.vid_mode; if( boot_params.sys_desc_table.length != 0 ) { set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2); machine_id = boot_params.sys_desc_table.table[0]; @@ -763,13 +814,17 @@ void __init setup_arch(char **cmdline_p) efi_init(); /* update e820 for memory not covered by WB MTRRs */ - find_max_pfn(); + propagate_e820_map(); mtrr_bp_init(); if (mtrr_trim_uncached_memory(max_pfn)) - find_max_pfn(); + propagate_e820_map(); max_low_pfn = setup_memory(); +#ifdef CONFIG_KVM_CLOCK + kvmclock_init(); +#endif + #ifdef CONFIG_VMI /* * Must be after max_low_pfn is determined, and before kernel @@ -777,6 +832,7 @@ void __init setup_arch(char **cmdline_p) */ vmi_init(); #endif + kvm_guest_init(); /* * NOTE: before this point _nobody_ is allowed to allocate @@ -820,6 +876,18 @@ void __init setup_arch(char **cmdline_p) io_delay_init(); +#ifdef CONFIG_X86_SMP + /* + * setup to use the early static init tables during kernel startup + * X86_SMP will exclude sub-arches that don't deal well with it. + */ + x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init; + x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init; +#ifdef CONFIG_NUMA + x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init; +#endif +#endif + #ifdef CONFIG_X86_GENERICARCH generic_apic_probe(); #endif |