summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/io_32.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/include/asm/io_32.h')
-rw-r--r--arch/x86/include/asm/io_32.h284
1 files changed, 284 insertions, 0 deletions
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
new file mode 100644
index 000000000000..4f7d878bda18
--- /dev/null
+++ b/arch/x86/include/asm/io_32.h
@@ -0,0 +1,284 @@
+#ifndef ASM_X86__IO_32_H
+#define ASM_X86__IO_32_H
+
+#include <linux/string.h>
+#include <linux/compiler.h>
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ * Linus
+ */
+
+ /*
+ * Bit simplified and optimized by Jan Hubicka
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+ *
+ * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+ * isa_read[wl] and isa_write[wl] fixed
+ * - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ */
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/iomap.h>
+
+#include <linux/vmalloc.h>
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+/**
+ * virt_to_phys - map virtual addresses to physical
+ * @address: address to remap
+ *
+ * The returned physical address is the physical (CPU) mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses directly mapped or allocated via kmalloc.
+ *
+ * This function does not give bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+ return __pa(address);
+}
+
+/**
+ * phys_to_virt - map physical address to virtual
+ * @address: address to remap
+ *
+ * The returned virtual address is a current CPU mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses that have a kernel mapping
+ *
+ * This function does not handle bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+
+static inline void *phys_to_virt(unsigned long address)
+{
+ return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/**
+ * ioremap - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * If the area you are trying to map is a PCI BAR you should have a
+ * look at pci_iomap().
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+ unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+ return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+static inline void
+memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *)addr, val, count);
+}
+
+static inline void
+memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+ __memcpy(dst, (const void __force *)src, count);
+}
+
+static inline void
+memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ __memcpy((void __force *)dst, src, count);
+}
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+/*
+ * Cache management
+ *
+ * This needed for two cases
+ * 1. Out of order aware processors
+ * 2. Accidentally out of order processors (PPro errata #51)
+ */
+
+#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
+
+static inline void flush_write_buffers(void)
+{
+ asm volatile("lock; addl $0,0(%%esp)": : :"memory");
+}
+
+#else
+
+#define flush_write_buffers() do { } while (0)
+
+#endif
+
+#endif /* __KERNEL__ */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
+#else
+
+static inline void slow_down_io(void)
+{
+ native_io_delay();
+#ifdef REALLY_SLOW_IO
+ native_io_delay();
+ native_io_delay();
+ native_io_delay();
+#endif
+}
+
+#endif
+
+#define __BUILDIO(bwl, bw, type) \
+static inline void out##bwl(unsigned type value, int port) \
+{ \
+ out##bwl##_local(value, port); \
+} \
+ \
+static inline unsigned type in##bwl(int port) \
+{ \
+ return in##bwl##_local(port); \
+}
+
+#define BUILDIO(bwl, bw, type) \
+static inline void out##bwl##_local(unsigned type value, int port) \
+{ \
+ asm volatile("out" #bwl " %" #bw "0, %w1" \
+ : : "a"(value), "Nd"(port)); \
+} \
+ \
+static inline unsigned type in##bwl##_local(int port) \
+{ \
+ unsigned type value; \
+ asm volatile("in" #bwl " %w1, %" #bw "0" \
+ : "=a"(value) : "Nd"(port)); \
+ return value; \
+} \
+ \
+static inline void out##bwl##_local_p(unsigned type value, int port) \
+{ \
+ out##bwl##_local(value, port); \
+ slow_down_io(); \
+} \
+ \
+static inline unsigned type in##bwl##_local_p(int port) \
+{ \
+ unsigned type value = in##bwl##_local(port); \
+ slow_down_io(); \
+ return value; \
+} \
+ \
+__BUILDIO(bwl, bw, type) \
+ \
+static inline void out##bwl##_p(unsigned type value, int port) \
+{ \
+ out##bwl(value, port); \
+ slow_down_io(); \
+} \
+ \
+static inline unsigned type in##bwl##_p(int port) \
+{ \
+ unsigned type value = in##bwl(port); \
+ slow_down_io(); \
+ return value; \
+} \
+ \
+static inline void outs##bwl(int port, const void *addr, unsigned long count) \
+{ \
+ asm volatile("rep; outs" #bwl \
+ : "+S"(addr), "+c"(count) : "d"(port)); \
+} \
+ \
+static inline void ins##bwl(int port, void *addr, unsigned long count) \
+{ \
+ asm volatile("rep; ins" #bwl \
+ : "+D"(addr), "+c"(count) : "d"(port)); \
+}
+
+BUILDIO(b, b, char)
+BUILDIO(w, w, short)
+BUILDIO(l, , int)
+
+#endif /* ASM_X86__IO_32_H */