summaryrefslogtreecommitdiff
path: root/arch/ppc/boot/simple/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/boot/simple/pci.c')
-rw-r--r--arch/ppc/boot/simple/pci.c274
1 files changed, 0 insertions, 274 deletions
diff --git a/arch/ppc/boot/simple/pci.c b/arch/ppc/boot/simple/pci.c
deleted file mode 100644
index b0f673c8b7d9..000000000000
--- a/arch/ppc/boot/simple/pci.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* Stand alone funtions for QSpan Tundra support.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-extern void puthex(unsigned long val);
-extern void puts(const char *);
-
-/* To map PCI devices, you first write 0xffffffff into the device
- * base address registers. When the register is read back, the
- * number of most significant '1' bits describes the amount of address
- * space needed for mapping. If the most significant bit is not set,
- * either the device does not use that address register, or it has
- * a fixed address that we can't change. After the address is assigned,
- * the command register has to be written to enable the card.
- */
-typedef struct {
- u_char pci_bus;
- u_char pci_devfn;
- ushort pci_command;
- uint pci_addrs[6];
-} pci_map_t;
-
-/* We should probably dynamically allocate these structures.
-*/
-#define MAX_PCI_DEVS 32
-int pci_dev_cnt;
-pci_map_t pci_map[MAX_PCI_DEVS];
-
-void pci_conf_write(int bus, int device, int func, int reg, uint writeval);
-void pci_conf_read(int bus, int device, int func, int reg, void *readval);
-void probe_addresses(int bus, int devfn);
-void map_pci_addrs(void);
-
-extern int
-qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned char *val);
-extern int
-qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned short *val);
-extern int
-qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned int *val);
-extern int
-qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned char val);
-extern int
-qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned short val);
-extern int
-qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned int val);
-
-
-/* This is a really stripped version of PCI bus scan. All we are
- * looking for are devices that exist.
- */
-void
-pci_scanner(int addr_probe)
-{
- unsigned int devfn, l, class, bus_number;
- unsigned char hdr_type, is_multi;
-
- is_multi = 0;
- bus_number = 0;
- for (devfn = 0; devfn < 0xff; ++devfn) {
- /* The device numbers are comprised of upper 5 bits of
- * device number and lower 3 bits of multi-function number.
- */
- if ((devfn & 7) && !is_multi) {
- /* Don't scan multifunction addresses if this is
- * not a multifunction device.
- */
- continue;
- }
-
- /* Read the header to determine card type.
- */
- qs_pci_read_config_byte(bus_number, devfn, PCI_HEADER_TYPE,
- &hdr_type);
-
- /* If this is a base device number, check the header to
- * determine if it is mulifunction.
- */
- if ((devfn & 7) == 0)
- is_multi = hdr_type & 0x80;
-
- /* Check to see if the board is really in the slot.
- */
- qs_pci_read_config_dword(bus_number, devfn, PCI_VENDOR_ID, &l);
- /* some broken boards return 0 if a slot is empty: */
- if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff ||
- l == 0xffff0000) {
- /* Nothing there.
- */
- is_multi = 0;
- continue;
- }
-
- /* If we are not performing an address probe,
- * just simply print out some information.
- */
- if (!addr_probe) {
- qs_pci_read_config_dword(bus_number, devfn,
- PCI_CLASS_REVISION, &class);
-
- class >>= 8; /* upper 3 bytes */
-
-#if 0
- printf("Found (%3d:%d): vendor 0x%04x, device 0x%04x, class 0x%06x\n",
- (devfn >> 3), (devfn & 7),
- (l & 0xffff), (l >> 16) & 0xffff, class);
-#else
- puts("Found ("); puthex(devfn >> 3);
- puts(":"); puthex(devfn & 7);
- puts("): vendor "); puthex(l & 0xffff);
- puts(", device "); puthex((l >> 16) & 0xffff);
- puts(", class "); puthex(class); puts("\n");
-#endif
- }
- else {
- /* If this is a "normal" device, build address list.
- */
- if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL)
- probe_addresses(bus_number, devfn);
- }
- }
-
- /* Now map the boards.
- */
- if (addr_probe)
- map_pci_addrs();
-}
-
-/* Probe addresses for the specified device. This is a destructive
- * operation because it writes the registers.
- */
-void
-probe_addresses(bus, devfn)
-{
- int i;
- uint pciaddr;
- ushort pcicmd;
- pci_map_t *pm;
-
- if (pci_dev_cnt >= MAX_PCI_DEVS) {
- puts("Too many PCI devices\n");
- return;
- }
-
- pm = &pci_map[pci_dev_cnt++];
-
- pm->pci_bus = bus;
- pm->pci_devfn = devfn;
-
- for (i=0; i<6; i++) {
- qs_pci_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), -1);
- qs_pci_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4),
- &pciaddr);
- pm->pci_addrs[i] = pciaddr;
- qs_pci_read_config_word(bus, devfn, PCI_COMMAND, &pcicmd);
- pm->pci_command = pcicmd;
- }
-}
-
-/* Map the cards into the PCI space. The PCI has separate memory
- * and I/O spaces. In addition, some memory devices require mapping
- * below 1M. The least significant 4 bits of the address register
- * provide information. If this is an I/O device, only the LS bit
- * is used to indicate that, so I/O devices can be mapped to a two byte
- * boundard. Memory addresses can be mapped to a 32 byte boundary.
- * The QSpan implementations usually have a 1Gbyte space for each
- * memory and I/O spaces.
- *
- * This isn't a terribly fancy algorithm. I just map the spaces from
- * the top starting with the largest address space. When finished,
- * the registers are written and the card enabled.
- *
- * While the Tundra can map a large address space on most boards, we
- * need to be careful because it may overlap other devices (like IMMR).
- */
-#define MEMORY_SPACE_SIZE 0x20000000
-#define IO_SPACE_SIZE 0x20000000
-
-void
-map_pci_addrs()
-{
- uint pci_mem_top, pci_mem_low;
- uint pci_io_top;
- uint addr_mask, reg_addr, space;
- int i, j;
- pci_map_t *pm;
-
- pci_mem_top = MEMORY_SPACE_SIZE;
- pci_io_top = IO_SPACE_SIZE;
- pci_mem_low = (1 * 1024 * 1024); /* Below one meg addresses */
-
- /* We can't map anything more than the maximum space, but test
- * for it anyway to catch devices out of range.
- */
- addr_mask = 0x80000000;
-
- do {
- space = (~addr_mask) + 1; /* Size of the space */
- for (i=0; i<pci_dev_cnt; i++) {
- pm = &pci_map[i];
- for (j=0; j<6; j++) {
- /* If the MS bit is not set, this has either
- * already been mapped, or is not used.
- */
- reg_addr = pm->pci_addrs[j];
- if ((reg_addr & 0x80000000) == 0)
- continue;
- if (reg_addr & PCI_BASE_ADDRESS_SPACE_IO) {
- if ((reg_addr & PCI_BASE_ADDRESS_IO_MASK) != addr_mask)
- continue;
- if (pci_io_top < space) {
- puts("Out of PCI I/O space\n");
- }
- else {
- pci_io_top -= space;
- pm->pci_addrs[j] = pci_io_top;
- pm->pci_command |= PCI_COMMAND_IO;
- }
- }
- else {
- if ((reg_addr & PCI_BASE_ADDRESS_MEM_MASK) != addr_mask)
- continue;
-
- /* Memory space. Test if below 1M.
- */
- if (reg_addr & PCI_BASE_ADDRESS_MEM_TYPE_1M) {
- if (pci_mem_low < space) {
- puts("Out of PCI 1M space\n");
- }
- else {
- pci_mem_low -= space;
- pm->pci_addrs[j] = pci_mem_low;
- }
- }
- else {
- if (pci_mem_top < space) {
- puts("Out of PCI Mem space\n");
- }
- else {
- pci_mem_top -= space;
- pm->pci_addrs[j] = pci_mem_top;
- }
- }
- pm->pci_command |= PCI_COMMAND_MEMORY;
- }
- }
- }
- addr_mask >>= 1;
- addr_mask |= 0x80000000;
- } while (addr_mask != 0xfffffffe);
-
- /* Now, run the list one more time and map everything.
- */
- for (i=0; i<pci_dev_cnt; i++) {
- pm = &pci_map[i];
- for (j=0; j<6; j++) {
- qs_pci_write_config_dword(pm->pci_bus, pm->pci_devfn,
- PCI_BASE_ADDRESS_0 + (j * 4), pm->pci_addrs[j]);
- }
-
- /* Enable memory or address mapping.
- */
- qs_pci_write_config_word(pm->pci_bus, pm->pci_devfn, PCI_COMMAND,
- pm->pci_command);
- }
-}
-