summaryrefslogtreecommitdiff
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig47
-rw-r--r--arch/mips/Makefile13
-rw-r--r--arch/mips/configs/it8172_defconfig964
-rw-r--r--arch/mips/configs/ivr_defconfig920
-rw-r--r--arch/mips/ite-boards/Kconfig8
-rw-r--r--arch/mips/ite-boards/generic/Makefile15
-rw-r--r--arch/mips/ite-boards/generic/dbg_io.c124
-rw-r--r--arch/mips/ite-boards/generic/irq.c308
-rw-r--r--arch/mips/ite-boards/generic/it8172_cir.c170
-rw-r--r--arch/mips/ite-boards/generic/it8172_setup.c352
-rw-r--r--arch/mips/ite-boards/generic/lpc.c144
-rw-r--r--arch/mips/ite-boards/generic/pmon_prom.c135
-rw-r--r--arch/mips/ite-boards/generic/puts.c139
-rw-r--r--arch/mips/ite-boards/generic/reset.c60
-rw-r--r--arch/mips/ite-boards/generic/time.c249
-rw-r--r--arch/mips/ite-boards/ivr/Makefile10
-rw-r--r--arch/mips/ite-boards/ivr/README3
-rw-r--r--arch/mips/ite-boards/ivr/init.c81
-rw-r--r--arch/mips/ite-boards/qed-4n-s01b/Makefile10
-rw-r--r--arch/mips/ite-boards/qed-4n-s01b/README2
-rw-r--r--arch/mips/ite-boards/qed-4n-s01b/init.c82
-rw-r--r--arch/mips/pci/Makefile3
-rw-r--r--arch/mips/pci/fixup-ite8172g.c80
-rw-r--r--arch/mips/pci/fixup-ivr.c75
-rw-r--r--arch/mips/pci/ops-it8172.c213
25 files changed, 0 insertions, 4207 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 87cee341eb54..9fe90507e6c7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -203,39 +203,6 @@ config MIPS_EV64120
<http://www.marvell.com/>. Say Y here if you wish to build a
kernel for this platform.
-config MIPS_IVR
- bool "Globespan IVR board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select ITE_BOARD_GEN
- select SYS_HAS_CPU_NEVADA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This is an evaluation board built by Globespan to showcase thir
- iVR (Internet Video Recorder) design. It utilizes a QED RM5231
- R5000 MIPS core. More information can be found out their website
- located at <http://www.globespan.net/>. Say Y here if you wish to
- build a kernel for this platform.
-
-config MIPS_ITE8172
- bool "ITE 8172G board"
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select ITE_BOARD_GEN
- select SYS_HAS_CPU_R5432
- select SYS_HAS_CPU_NEVADA
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
- with ATX form factor that utilizes a MIPS R5000 to work with its
- ITE8172G companion internet appliance chip. The MIPS core can be
- either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
- a kernel for this platform.
-
config MACH_JAZZ
bool "Jazz family of machines"
select ARC
@@ -804,7 +771,6 @@ endchoice
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
-source "arch/mips/ite-boards/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/momentum/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
@@ -964,9 +930,6 @@ config MIPS_RM9122
config PCI_MARVELL
bool
-config ITE_BOARD_GEN
- bool
-
config SOC_AU1000
bool
select SOC_AU1X00
@@ -1050,16 +1013,6 @@ config AU1X00_USB_DEVICE
depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
default n
-config IT8172_CIR
- bool
- depends on MIPS_ITE8172 || MIPS_IVR
- default y
-
-config IT8712
- bool
- depends on MIPS_ITE8172
- default y
-
config BOOT_ELF32
bool
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index e521826b4234..2124350ab94d 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -287,19 +287,6 @@ cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc
load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
#
-# Globespan IVR eval board with QED 5231 CPU
-#
-core-$(CONFIG_ITE_BOARD_GEN) += arch/mips/ite-boards/generic/
-core-$(CONFIG_MIPS_IVR) += arch/mips/ite-boards/ivr/
-load-$(CONFIG_MIPS_IVR) += 0xffffffff80100000
-
-#
-# ITE 8172 eval board with QED 5231 CPU
-#
-core-$(CONFIG_MIPS_ITE8172) += arch/mips/ite-boards/qed-4n-s01b/
-load-$(CONFIG_MIPS_ITE8172) += 0xffffffff80100000
-
-#
# For all MIPS, Inc. eval boards
#
core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
deleted file mode 100644
index 18d20fb7d5f0..000000000000
--- a/arch/mips/configs/it8172_defconfig
+++ /dev/null
@@ -1,964 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul 6 10:04:11 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-CONFIG_MIPS_ITE8172=y
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_IT8172_REVC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_ITE_BOARD_GEN=y
-CONFIG_IT8172_CIR=y
-CONFIG_IT8712=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-CONFIG_CPU_NEVADA=y
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5432=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-# CONFIG_PCI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x2000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_QTRONIX_KEYBOARD is not set
-# CONFIG_IT8172_SCR0 is not set
-# CONFIG_IT8172_SCR1 is not set
-# CONFIG_ITE_GPIO is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=y
-CONFIG_SOUND_IT8172=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
deleted file mode 100644
index 99831d0bf76b..000000000000
--- a/arch/mips/configs/ivr_defconfig
+++ /dev/null
@@ -1,920 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul 6 10:04:12 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-CONFIG_MIPS_IVR=y
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_ITE_BOARD_GEN=y
-CONFIG_IT8172_CIR=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-CONFIG_CPU_NEVADA=y
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_QTRONIX_KEYBOARD=y
-CONFIG_IT8172_SCR0=y
-CONFIG_IT8172_SCR1=y
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
diff --git a/arch/mips/ite-boards/Kconfig b/arch/mips/ite-boards/Kconfig
deleted file mode 100644
index a6d59ad8f846..000000000000
--- a/arch/mips/ite-boards/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config IT8172_REVC
- bool "Support for older IT8172 (Rev C)"
- depends on MIPS_ITE8172
- help
- Say Y here to support the older, Revision C version of the Integrated
- Technology Express, Inc. ITE8172 SBC. Vendor page at
- <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/partners/semiconductor/ite.html>.
diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile
deleted file mode 100644
index 63431538d0ec..000000000000
--- a/arch/mips/ite-boards/generic/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
-#
-# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
-#
-
-obj-y += it8172_setup.o irq.o pmon_prom.o \
- time.o lpc.o puts.o reset.o
-
-obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o
-obj-$(CONFIG_KGDB) += dbg_io.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
deleted file mode 100644
index 8e9cd8a9670a..000000000000
--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ /dev/null
@@ -1,124 +0,0 @@
-
-
-#ifdef CONFIG_KGDB
-
-/* --- CONFIG --- */
-
-/* we need uint32 uint8 */
-/* #include "types.h" */
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-/* --- END OF CONFIG --- */
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-
-/* [stevel] we use the IT8712 serial port for kgdb */
-#define DEBUG_BASE 0xB40003F8 /* 8712 serial port 1 base address */
-#define MAX_BAUD 115200
-
-/* === END OF CONFIG === */
-
-/* register offset */
-#define OFS_RCV_BUFFER 0
-#define OFS_TRANS_HOLD 0
-#define OFS_SEND_BUFFER 0
-#define OFS_INTR_ENABLE 1
-#define OFS_INTR_ID 2
-#define OFS_DATA_FORMAT 3
-#define OFS_LINE_CONTROL 3
-#define OFS_MODEM_CONTROL 4
-#define OFS_RS232_OUTPUT 4
-#define OFS_LINE_STATUS 5
-#define OFS_MODEM_STATUS 6
-#define OFS_RS232_INPUT 6
-#define OFS_SCRATCH_PAD 7
-
-#define OFS_DIVISOR_LSB 0
-#define OFS_DIVISOR_MSB 1
-
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (*((volatile uint8*)(DEBUG_BASE + y)))
-#define UART16550_WRITE(y,z) ((*((volatile uint8*)(DEBUG_BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
- /* disable interrupts */
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- /* set up baud rate */
- {
- uint32 divisor;
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- divisor = MAX_BAUD / baud;
- UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
- UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
- /* clear DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
- }
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-uint8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_115200,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_115200,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
- return 1;
-}
-
-#endif
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
deleted file mode 100644
index cb59ca4f76f0..000000000000
--- a/arch/mips/ite-boards/generic/irq.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * ITE 8172G interrupt/setup routines.
- *
- * Copyright 2000,2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * Part of this file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/atlas/atlas_int.c.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/serial_reg.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#include <asm/it8172/it8172_dbg.h>
-
-/* revisit */
-#define EXT_IRQ0_TO_IP 2 /* IP 2 */
-#define EXT_IRQ5_TO_IP 7 /* IP 7 */
-
-#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
-
-extern void set_debug_traps(void);
-extern void mips_timer_interrupt(int irq, struct pt_regs *regs);
-
-struct it8172_intc_regs volatile *it8172_hw0_icregs =
- (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));
-
-static void disable_it8172_irq(unsigned int irq_nr)
-{
- if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
- /* LPC interrupt */
- it8172_hw0_icregs->lpc_mask |=
- (1 << (irq_nr - IT8172_LPC_IRQ_BASE));
- } else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
- /* Local Bus interrupt */
- it8172_hw0_icregs->lb_mask |=
- (1 << (irq_nr - IT8172_LB_IRQ_BASE));
- } else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
- /* PCI and other interrupts */
- it8172_hw0_icregs->pci_mask |=
- (1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
- } else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
- /* NMI interrupts */
- it8172_hw0_icregs->nmi_mask |=
- (1 << (irq_nr - IT8172_NMI_IRQ_BASE));
- } else {
- panic("disable_it8172_irq: bad irq %d", irq_nr);
- }
-}
-
-static void enable_it8172_irq(unsigned int irq_nr)
-{
- if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
- /* LPC interrupt */
- it8172_hw0_icregs->lpc_mask &=
- ~(1 << (irq_nr - IT8172_LPC_IRQ_BASE));
- }
- else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
- /* Local Bus interrupt */
- it8172_hw0_icregs->lb_mask &=
- ~(1 << (irq_nr - IT8172_LB_IRQ_BASE));
- }
- else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
- /* PCI and other interrupts */
- it8172_hw0_icregs->pci_mask &=
- ~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
- }
- else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
- /* NMI interrupts */
- it8172_hw0_icregs->nmi_mask &=
- ~(1 << (irq_nr - IT8172_NMI_IRQ_BASE));
- }
- else {
- panic("enable_it8172_irq: bad irq %d", irq_nr);
- }
-}
-
-static unsigned int startup_ite_irq(unsigned int irq)
-{
- enable_it8172_irq(irq);
- return 0;
-}
-
-#define shutdown_ite_irq disable_it8172_irq
-#define mask_and_ack_ite_irq disable_it8172_irq
-
-static void end_ite_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_it8172_irq(irq);
-}
-
-static struct irq_chip it8172_irq_type = {
- .typename = "ITE8172",
- .startup = startup_ite_irq,
- .shutdown = shutdown_ite_irq,
- .enable = enable_it8172_irq,
- .disable = disable_it8172_irq,
- .ack = mask_and_ack_ite_irq,
- .end = end_ite_irq,
-};
-
-
-static void enable_none(unsigned int irq) { }
-static unsigned int startup_none(unsigned int irq) { return 0; }
-static void disable_none(unsigned int irq) { }
-static void ack_none(unsigned int irq) { }
-
-/* startup is the same as "enable", shutdown is same as "disable" */
-#define shutdown_none disable_none
-#define end_none enable_none
-
-static struct irq_chip cp0_irq_type = {
- .typename = "CP0 Count",
- .startup = startup_none,
- .shutdown = shutdown_none,
- .enable = enable_none,
- .disable = disable_none,
- .ack = ack_none,
- .end = end_none
-};
-
-void enable_cpu_timer(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- set_c0_status(0x100 << EXT_IRQ5_TO_IP);
- local_irq_restore(flags);
-}
-
-void __init arch_init_irq(void)
-{
- int i;
- unsigned long flags;
-
- /* mask all interrupts */
- it8172_hw0_icregs->lb_mask = 0xffff;
- it8172_hw0_icregs->lpc_mask = 0xffff;
- it8172_hw0_icregs->pci_mask = 0xffff;
- it8172_hw0_icregs->nmi_mask = 0xffff;
-
- /* make all interrupts level triggered */
- it8172_hw0_icregs->lb_trigger = 0;
- it8172_hw0_icregs->lpc_trigger = 0;
- it8172_hw0_icregs->pci_trigger = 0;
- it8172_hw0_icregs->nmi_trigger = 0;
-
- /* active level setting */
- /* uart, keyboard, and mouse are active high */
- it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000);
- it8172_hw0_icregs->lb_level |= 0x20;
-
- /* keyboard and mouse are edge triggered */
- it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000);
-
-
-#if 0
- // Enable this piece of code to make internal USB interrupt
- // edge triggered.
- it8172_hw0_icregs->pci_trigger |=
- (1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
- it8172_hw0_icregs->pci_level &=
- ~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
-#endif
-
- for (i = 0; i <= IT8172_LAST_IRQ; i++) {
- irq_desc[i].chip = &it8172_irq_type;
- spin_lock_init(&irq_desc[i].lock);
- }
- irq_desc[MIPS_CPU_TIMER_IRQ].chip = &cp0_irq_type;
- set_c0_status(ALLINTS_NOTIMER);
-}
-
-void mips_spurious_interrupt(struct pt_regs *regs)
-{
-#if 1
- return;
-#else
- unsigned long status, cause;
-
- printk("got spurious interrupt\n");
- status = read_c0_status();
- cause = read_c0_cause();
- printk("status %x cause %x\n", status, cause);
- printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr);
-#endif
-}
-
-void it8172_hw0_irqdispatch(struct pt_regs *regs)
-{
- int irq;
- unsigned short intstatus = 0, status = 0;
-
- intstatus = it8172_hw0_icregs->intstatus;
- if (intstatus & 0x8) {
- panic("Got NMI interrupt");
- } else if (intstatus & 0x4) {
- /* PCI interrupt */
- irq = 0;
- status |= it8172_hw0_icregs->pci_req;
- while (!(status & 0x1)) {
- irq++;
- status >>= 1;
- }
- irq += IT8172_PCI_DEV_IRQ_BASE;
- } else if (intstatus & 0x1) {
- /* Local Bus interrupt */
- irq = 0;
- status |= it8172_hw0_icregs->lb_req;
- while (!(status & 0x1)) {
- irq++;
- status >>= 1;
- }
- irq += IT8172_LB_IRQ_BASE;
- } else if (intstatus & 0x2) {
- /* LPC interrupt */
- /* Since some lpc interrupts are edge triggered,
- * we could lose an interrupt this way because
- * we acknowledge all ints at onces. Revisit.
- */
- status |= it8172_hw0_icregs->lpc_req;
- it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */
- irq = 0;
- while (!(status & 0x1)) {
- irq++;
- status >>= 1;
- }
- irq += IT8172_LPC_IRQ_BASE;
- } else
- return;
-
- do_IRQ(irq, regs);
-}
-
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
-{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
- if (!pending)
- mips_spurious_interrupt(regs);
- else if (pending & CAUSEF_IP7)
- ll_timer_interrupt(127, regs);
- else if (pending & CAUSEF_IP2)
- it8172_hw0_irqdispatch(regs);
-}
-
-void show_pending_irqs(void)
-{
- fputs("intstatus: ");
- put32(it8172_hw0_icregs->intstatus);
- puts("");
-
- fputs("pci_req: ");
- put32(it8172_hw0_icregs->pci_req);
- puts("");
-
- fputs("lb_req: ");
- put32(it8172_hw0_icregs->lb_req);
- puts("");
-
- fputs("lpc_req: ");
- put32(it8172_hw0_icregs->lpc_req);
- puts("");
-}
diff --git a/arch/mips/ite-boards/generic/it8172_cir.c b/arch/mips/ite-boards/generic/it8172_cir.c
deleted file mode 100644
index bfc25adcfec6..000000000000
--- a/arch/mips/ite-boards/generic/it8172_cir.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * IT8172 Consumer IR port generic routines.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#ifdef CONFIG_IT8172_CIR
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_cir.h>
-
-
-volatile struct it8172_cir_regs *cir_regs[NUM_CIR_PORTS] = {
- (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR0_BASE)),
- (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR1_BASE))};
-
-
-/*
- * Initialize Consumer IR Port.
- */
-int cir_port_init(struct cir_port *cir)
-{
- int port = cir->port;
- unsigned char data;
-
- /* set baud rate */
- cir_regs[port]->bdlr = cir->baud_rate & 0xff;
- cir_regs[port]->bdhr = (cir->baud_rate >> 8) & 0xff;
-
- /* set receiver control register */
- cir_regs[port]->rcr = (CIR_SET_RDWOS(cir->rdwos) | CIR_SET_RXDCR(cir->rxdcr));
-
- /* set carrier frequency register */
- cir_regs[port]->cfr = (CIR_SET_CF(cir->cfq) | CIR_SET_HS(cir->hcfs));
-
- /* set fifo threshold */
- data = cir_regs[port]->mstcr & 0xf3;
- data |= CIR_SET_FIFO_TL(cir->fifo_tl);
- cir_regs[port]->mstcr = data;
-
- clear_fifo(cir);
- enable_receiver(cir);
- disable_rx_demodulation(cir);
-
- set_rx_active(cir);
- int_enable(cir);
- rx_int_enable(cir);
-
- return 0;
-}
-
-
-void clear_fifo(struct cir_port *cir)
-{
- cir_regs[cir->port]->mstcr |= CIR_FIFO_CLEAR;
-}
-
-void enable_receiver(struct cir_port *cir)
-{
- cir_regs[cir->port]->rcr |= CIR_RXEN;
-}
-
-void disable_receiver(struct cir_port *cir)
-{
- cir_regs[cir->port]->rcr &= ~CIR_RXEN;
-}
-
-void enable_rx_demodulation(struct cir_port *cir)
-{
- cir_regs[cir->port]->rcr |= CIR_RXEND;
-}
-
-void disable_rx_demodulation(struct cir_port *cir)
-{
- cir_regs[cir->port]->rcr &= ~CIR_RXEND;
-}
-
-void set_rx_active(struct cir_port *cir)
-{
- cir_regs[cir->port]->rcr |= CIR_RXACT;
-}
-
-void int_enable(struct cir_port *cir)
-{
- cir_regs[cir->port]->ier |= CIR_IEC;
-}
-
-void rx_int_enable(struct cir_port *cir)
-{
- cir_regs[cir->port]->ier |= CIR_RDAIE;
-}
-
-void dump_regs(struct cir_port *cir)
-{
- printk("mstcr %x ier %x iir %x cfr %x rcr %x tcr %x tfsr %x rfsr %x\n",
- cir_regs[cir->port]->mstcr,
- cir_regs[cir->port]->ier,
- cir_regs[cir->port]->iir,
- cir_regs[cir->port]->cfr,
- cir_regs[cir->port]->rcr,
- cir_regs[cir->port]->tcr,
- cir_regs[cir->port]->tfsr,
- cir_regs[cir->port]->rfsr);
-
- while (cir_regs[cir->port]->iir & CIR_RDAI) {
- printk("data %x\n", cir_regs[cir->port]->dr);
- }
-}
-
-void dump_reg_addr(struct cir_port *cir)
-{
- printk("dr %x mstcr %x ier %x iir %x cfr %x rcr %x tcr %x bdlr %x bdhr %x tfsr %x rfsr %x\n",
- (unsigned)&cir_regs[cir->port]->dr,
- (unsigned)&cir_regs[cir->port]->mstcr,
- (unsigned)&cir_regs[cir->port]->ier,
- (unsigned)&cir_regs[cir->port]->iir,
- (unsigned)&cir_regs[cir->port]->cfr,
- (unsigned)&cir_regs[cir->port]->rcr,
- (unsigned)&cir_regs[cir->port]->tcr,
- (unsigned)&cir_regs[cir->port]->bdlr,
- (unsigned)&cir_regs[cir->port]->bdhr,
- (unsigned)&cir_regs[cir->port]->tfsr,
- (unsigned)&cir_regs[cir->port]->rfsr);
-}
-
-int cir_get_rx_count(struct cir_port *cir)
-{
- return cir_regs[cir->port]->rfsr & CIR_RXFBC_MASK;
-}
-
-char cir_read_data(struct cir_port *cir)
-{
- return cir_regs[cir->port]->dr;
-}
-
-char get_int_status(struct cir_port *cir)
-{
- return cir_regs[cir->port]->iir;
-}
-#endif
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
deleted file mode 100644
index 07faf3cacff2..000000000000
--- a/arch/mips/ite-boards/generic/it8172_setup.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * IT8172/QED5231 board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/serial_reg.h>
-#include <linux/major.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/traps.h>
-#include <asm/it8172/it8172.h>
-#include <asm/it8712.h>
-
-extern struct resource ioport_resource;
-#ifdef CONFIG_SERIO_I8042
-int init_8712_keyboard(void);
-#endif
-
-extern int SearchIT8712(void);
-extern void InitLPCInterface(void);
-extern char * __init prom_getcmdline(void);
-extern void it8172_restart(char *command);
-extern void it8172_halt(void);
-extern void it8172_power_off(void);
-
-extern void it8172_time_init(void);
-
-#ifdef CONFIG_IT8172_REVC
-struct {
- struct resource ram;
- struct resource pci_mem;
- struct resource pci_io;
- struct resource flash;
- struct resource boot;
-} it8172_resources = {
- {
- .start = 0, /* to be initted */
- .end = 0,
- .name = "RAM",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x10000000,
- .end = 0x13FFFFFF,
- .name = "PCI Mem",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x14000000,
- .end = 0x17FFFFFF
- .name = "PCI I/O",
- }, {
- .start = 0x08000000,
- .end = 0x0CFFFFFF
- .name = "Flash",
- }, {
- .start = 0x1FC00000,
- .end = 0x1FFFFFFF
- .name = "Boot ROM",
- }
-};
-#else
-struct {
- struct resource ram;
- struct resource pci_mem0;
- struct resource pci_mem1;
- struct resource pci_io;
- struct resource pci_mem2;
- struct resource pci_mem3;
- struct resource flash;
- struct resource boot;
-} it8172_resources = {
- {
- .start = 0, /* to be initted */
- .end = 0,
- .name = "RAM",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x0C000000,
- .end = 0x0FFFFFFF,
- .name = "PCI Mem0",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x10000000,
- .end = 0x13FFFFFF,
- .name = "PCI Mem1",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x14000000,
- .end = 0x17FFFFFF
- .name = "PCI I/O",
- }, {
- .start = 0x1A000000,
- .end = 0x1BFFFFFF,
- .name = "PCI Mem2",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x1C000000,
- .end = 0x1FBFFFFF,
- .name = "PCI Mem3",
- .flags = IORESOURCE_MEM
- }, {
- .start = 0x08000000,
- .end = 0x0CFFFFFF
- .name = "Flash",
- }, {
- .start = 0x1FC00000,
- .end = 0x1FFFFFFF
- .name = "Boot ROM",
- }
-};
-#endif
-
-
-void __init it8172_init_ram_resource(unsigned long memsize)
-{
- it8172_resources.ram.end = memsize;
-}
-
-void __init plat_mem_setup(void)
-{
- unsigned short dsr;
- char *argptr;
-
- argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_CONSOLE
- if ((argptr = strstr(argptr, "console=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-
- clear_c0_status(ST0_FR);
-
- board_time_init = it8172_time_init;
-
- _machine_restart = it8172_restart;
- _machine_halt = it8172_halt;
- pm_power_off = it8172_power_off;
-
- /*
- * IO/MEM resources.
- *
- * revisit this area.
- */
- set_io_port_base(KSEG1);
- ioport_resource.start = it8172_resources.pci_io.start;
- ioport_resource.end = it8172_resources.pci_io.end;
-#ifdef CONFIG_IT8172_REVC
- iomem_resource.start = it8172_resources.pci_mem.start;
- iomem_resource.end = it8172_resources.pci_mem.end;
-#else
- iomem_resource.start = it8172_resources.pci_mem0.start;
- iomem_resource.end = it8172_resources.pci_mem3.end;
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
- ROOT_DEV = Root_RAM0;
-#endif
-
- /*
- * Pull enabled devices out of standby
- */
- IT_IO_READ16(IT_PM_DSR, dsr);
-
- /*
- * Fixme: This breaks when these drivers are modules!!!
- */
-#ifdef CONFIG_SOUND_IT8172
- dsr &= ~IT_PM_DSR_ACSB;
-#else
- dsr |= IT_PM_DSR_ACSB;
-#endif
-#ifdef CONFIG_BLK_DEV_IT8172
- dsr &= ~IT_PM_DSR_IDESB;
-#else
- dsr |= IT_PM_DSR_IDESB;
-#endif
- IT_IO_WRITE16(IT_PM_DSR, dsr);
-
- InitLPCInterface();
-
-#ifdef CONFIG_MIPS_ITE8172
- if (SearchIT8712()) {
- printk("Found IT8712 Super IO\n");
- /* enable IT8712 serial port */
- LPCSetConfig(LDN_SERIAL1, 0x30, 0x01); /* enable */
- LPCSetConfig(LDN_SERIAL1, 0x23, 0x01); /* clock selection */
-#ifdef CONFIG_SERIO_I8042
- if (init_8712_keyboard()) {
- printk("Unable to initialize keyboard\n");
- LPCSetConfig(LDN_KEYBOARD, 0x30, 0x0); /* disable keyboard */
- } else {
- LPCSetConfig(LDN_KEYBOARD, 0x30, 0x1); /* enable keyboard */
- LPCSetConfig(LDN_KEYBOARD, 0xf0, 0x2);
- LPCSetConfig(LDN_KEYBOARD, 0x71, 0x3);
-
- LPCSetConfig(LDN_MOUSE, 0x30, 0x1); /* enable mouse */
-
- LPCSetConfig(0x4, 0x30, 0x1);
- LPCSetConfig(0x4, 0xf4, LPCGetConfig(0x4, 0xf4) | 0x80);
-
- if ((LPCGetConfig(LDN_KEYBOARD, 0x30) == 0) ||
- (LPCGetConfig(LDN_MOUSE, 0x30) == 0))
- printk("Error: keyboard or mouse not enabled\n");
-
- }
-#endif
- }
- else {
- printk("IT8712 Super IO not found\n");
- }
-#endif
-
-#ifdef CONFIG_IT8172_CIR
- {
- unsigned long data;
- //printk("Enabling CIR0\n");
- IT_IO_READ16(IT_PM_DSR, data);
- data &= ~IT_PM_DSR_CIR0SB;
- IT_IO_WRITE16(IT_PM_DSR, data);
- //printk("DSR register: %x\n", (unsigned)IT_IO_READ16(IT_PM_DSR, data));
- }
-#endif
-#ifdef CONFIG_IT8172_SCR0
- {
- unsigned i;
- /* Enable Smart Card Reader 0 */
- /* First power it up */
- IT_IO_READ16(IT_PM_DSR, i);
- i &= ~IT_PM_DSR_SCR0SB;
- IT_IO_WRITE16(IT_PM_DSR, i);
- /* Then initialize its registers */
- outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT
- |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
- |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
- |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
- |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT),
- IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SFR);
- outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
- IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SCDR);
- }
-#endif /* CONFIG_IT8172_SCR0 */
-#ifdef CONFIG_IT8172_SCR1
- {
- unsigned i;
- /* Enable Smart Card Reader 1 */
- /* First power it up */
- IT_IO_READ16(IT_PM_DSR, i);
- i &= ~IT_PM_DSR_SCR1SB;
- IT_IO_WRITE16(IT_PM_DSR, i);
- /* Then initialize its registers */
- outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT
- |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
- |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
- |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
- |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT),
- IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SFR);
- outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
- IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SCDR);
- }
-#endif /* CONFIG_IT8172_SCR1 */
-}
-
-#ifdef CONFIG_SERIO_I8042
-/*
- * According to the ITE Special BIOS Note for waking up the
- * keyboard controller...
- */
-static int init_8712_keyboard(void)
-{
- unsigned int cmd_port = 0x14000064;
- unsigned int data_port = 0x14000060;
- ^^^^^^^^^^^
- Somebody here doesn't grok the concept of io ports.
-
- unsigned char data;
- int i;
-
- outb(0xaa, cmd_port); /* send self-test cmd */
- i = 0;
- while (!(inb(cmd_port) & 0x1)) { /* wait output buffer full */
- i++;
- if (i > 0xffffff)
- return 1;
- }
-
- data = inb(data_port);
- outb(0xcb, cmd_port); /* set ps2 mode */
- while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
- i++;
- if (i > 0xffffff)
- return 1;
- }
- outb(0x01, data_port);
- while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
- i++;
- if (i > 0xffffff)
- return 1;
- }
-
- outb(0x60, cmd_port); /* write 8042 command byte */
- while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
- i++;
- if (i > 0xffffff)
- return 1;
- }
- outb(0x45, data_port); /* at interface, keyboard enabled, system flag */
- while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
- i++;
- if (i > 0xffffff)
- return 1;
- }
-
- outb(0xae, cmd_port); /* enable interface */
- return 0;
-}
-#endif
diff --git a/arch/mips/ite-boards/generic/lpc.c b/arch/mips/ite-boards/generic/lpc.c
deleted file mode 100644
index cc7584fbef8a..000000000000
--- a/arch/mips/ite-boards/generic/lpc.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * ITE Semi IT8712 Super I/O functions.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/io.h>
-#include <asm/types.h>
-#include <asm/it8712.h>
-#include <asm/it8172/it8172.h>
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-void LPCEnterMBPnP(void)
-{
- int i;
- unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
-
- for (i = 0; i<4; i++)
- outb(key[i], LPC_KEY_ADDR);
-
-}
-
-void LPCExitMBPnP(void)
-{
- outb(0x02, LPC_KEY_ADDR);
- outb(0x02, LPC_DATA_ADDR);
-}
-
-void LPCSetConfig(char LdnNumber, char Index, char data)
-{
- LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
- outb(0x07, LPC_KEY_ADDR);
- outb(LdnNumber, LPC_DATA_ADDR);
- outb(Index, LPC_KEY_ADDR);
- outb(data, LPC_DATA_ADDR);
- LPCExitMBPnP();
-}
-
-char LPCGetConfig(char LdnNumber, char Index)
-{
- char rtn;
-
- LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
- outb(0x07, LPC_KEY_ADDR);
- outb(LdnNumber, LPC_DATA_ADDR);
- outb(Index, LPC_KEY_ADDR);
- rtn = inb(LPC_DATA_ADDR);
- LPCExitMBPnP();
- return rtn;
-}
-
-int SearchIT8712(void)
-{
- unsigned char Id1, Id2;
- unsigned short Id;
-
- LPCEnterMBPnP();
- outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */
- Id1 = inb(LPC_DATA_ADDR);
- outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */
- Id2 = inb(LPC_DATA_ADDR);
- Id = (Id1 << 8) | Id2;
- LPCExitMBPnP();
- if (Id == 0x8712)
- return TRUE;
- else
- return FALSE;
-}
-
-void InitLPCInterface(void)
-{
- unsigned char bus, dev_fn;
- unsigned long data;
-
- bus = 0;
- dev_fn = 1<<3 | 4;
-
-
- /* pci cmd, SERR# Enable */
- IT_WRITE(IT_CONFADDR,
- (bus << IT_BUSNUM_SHF) |
- (dev_fn << IT_FUNCNUM_SHF) |
- ((0x4 / 4) << IT_REGNUM_SHF));
- IT_READ(IT_CONFDATA, data);
- data |= 0x0100;
- IT_WRITE(IT_CONFADDR,
- (bus << IT_BUSNUM_SHF) |
- (dev_fn << IT_FUNCNUM_SHF) |
- ((0x4 / 4) << IT_REGNUM_SHF));
- IT_WRITE(IT_CONFDATA, data);
-
- /* setup serial irq control register */
- IT_WRITE(IT_CONFADDR,
- (bus << IT_BUSNUM_SHF) |
- (dev_fn << IT_FUNCNUM_SHF) |
- ((0x48 / 4) << IT_REGNUM_SHF));
- IT_READ(IT_CONFDATA, data);
- data = (data & 0xffff00ff) | 0xc400;
- IT_WRITE(IT_CONFADDR,
- (bus << IT_BUSNUM_SHF) |
- (dev_fn << IT_FUNCNUM_SHF) |
- ((0x48 / 4) << IT_REGNUM_SHF));
- IT_WRITE(IT_CONFDATA, data);
-
-
- /* Enable I/O Space Subtractive Decode */
- /* default 0x4C is 0x3f220000 */
- IT_WRITE(IT_CONFADDR,
- (bus << IT_BUSNUM_SHF) |
- (dev_fn << IT_FUNCNUM_SHF) |
- ((0x4C / 4) << IT_REGNUM_SHF));
- IT_WRITE(IT_CONFDATA, 0x3f2200f3);
-}
diff --git a/arch/mips/ite-boards/generic/pmon_prom.c b/arch/mips/ite-boards/generic/pmon_prom.c
deleted file mode 100644
index 7d0a79be34d8..000000000000
--- a/arch/mips/ite-boards/generic/pmon_prom.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * PROM library initialisation code, assuming a version of
- * pmon is the boot code.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/xx files.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-extern int prom_argc;
-extern char **prom_argv, **prom_envp;
-
-typedef struct
-{
- char *name;
-/* char *val; */
-}t_env_var;
-
-
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
-void __init prom_init_cmdline(void)
-{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
-
- cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
- strcpy(cp, prom_argv[actr]);
- cp += strlen(prom_argv[actr]);
- *cp++ = ' ';
- actr++;
- }
- if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
- --cp;
- *cp = '\0';
-
-}
-
-
-char *prom_getenv(char *envname)
-{
- /*
- * Return a pointer to the given environment variable.
- * Environment variables are stored in the form of "memsize=64".
- */
-
- t_env_var *env = (t_env_var *)prom_envp;
- int i;
-
- i = strlen(envname);
-
- while(env->name) {
- if(strncmp(envname, env->name, i) == 0) {
- return(env->name + strlen(envname) + 1);
- }
- env++;
- }
- return(NULL);
-}
-
-static inline unsigned char str2hexnum(unsigned char c)
-{
- if(c >= '0' && c <= '9')
- return c - '0';
- if(c >= 'a' && c <= 'f')
- return c - 'a' + 10;
- return 0; /* foo */
-}
-
-unsigned long __init prom_free_prom_memory(void)
-{
- return 0;
-}
-
-unsigned long __init prom_get_memsize(void)
-{
- char *memsize_str;
- unsigned int memsize;
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
-#ifdef CONFIG_MIPS_ITE8172
- memsize = 32;
-#elif defined(CONFIG_MIPS_IVR)
- memsize = 64;
-#else
- memsize = 8;
-#endif
- printk("memsize unknown: setting to %dMB\n", memsize);
- } else {
- printk("memsize: %s\n", memsize_str);
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
- return memsize;
-}
diff --git a/arch/mips/ite-boards/generic/puts.c b/arch/mips/ite-boards/generic/puts.c
deleted file mode 100644
index 20b02df6b414..000000000000
--- a/arch/mips/ite-boards/generic/puts.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Low level uart routines to directly access a 16550 uart.
- *
- * Copyright 2000,2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-
-#define SERIAL_BASE 0xB4011800 /* it8172 */
-#define SER_CMD 5
-#define SER_DATA 0x00
-#define TX_BUSY 0x20
-
-#define TIMEOUT 0xffff
-#undef SLOW_DOWN
-
-static const char digits[16] = "0123456789abcdef";
-static volatile unsigned char *const com1 = (unsigned char *) SERIAL_BASE;
-
-
-#ifdef SLOW_DOWN
-static inline void slow_down()
-{
- int k;
- for (k = 0; k < 10000; k++);
-}
-#else
-#define slow_down()
-#endif
-
-void putch(const unsigned char c)
-{
- unsigned char ch;
- int i = 0;
-
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = c;
-}
-
-void puts(unsigned char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = *cp++;
- }
- putch('\r');
- putch('\n');
-}
-
-void fputs(unsigned char *cp)
-{
- unsigned char ch;
- int i = 0;
-
- while (*cp) {
-
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = *cp++;
- }
-}
-
-
-void put64(uint64_t ul)
-{
- int cnt;
- unsigned ch;
-
- cnt = 16; /* 16 nibbles in a 64 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char) (ul >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
-
-void put32(unsigned u)
-{
- int cnt;
- unsigned ch;
-
- cnt = 8; /* 8 nibbles in a 32 bit long */
- putch('0');
- putch('x');
- do {
- cnt--;
- ch = (unsigned char) (u >> cnt * 4) & 0x0F;
- putch(digits[ch]);
- } while (cnt > 0);
-}
diff --git a/arch/mips/ite-boards/generic/reset.c b/arch/mips/ite-boards/generic/reset.c
deleted file mode 100644
index 03bd5ba8c913..000000000000
--- a/arch/mips/ite-boards/generic/reset.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * ITE 8172 reset routines.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-
-void it8172_restart()
-{
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void it8172_halt(void)
-{
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-void it8172_power_off(void)
-{
- it8172_halt();
-}
diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c
deleted file mode 100644
index 3dc55569ff7f..000000000000
--- a/arch/mips/ite-boards/generic/time.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * Copyright (C) 2003 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Setting up the clock on the MIPS boards.
- */
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/spinlock.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/ptrace.h>
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#include <asm/debug.h>
-
-#define IT8172_RTC_ADR_REG (IT8172_PCI_IO_BASE + IT_RTC_BASE)
-#define IT8172_RTC_DAT_REG (IT8172_RTC_ADR_REG + 1)
-#define IT8172_RTC_CENTURY_REG (IT8172_PCI_IO_BASE + IT_RTC_CENTURY)
-
-static volatile char *rtc_adr_reg = (char*)KSEG1ADDR(IT8172_RTC_ADR_REG);
-static volatile char *rtc_dat_reg = (char*)KSEG1ADDR(IT8172_RTC_DAT_REG);
-static volatile char *rtc_century_reg = (char*)KSEG1ADDR(IT8172_RTC_CENTURY_REG);
-
-unsigned char it8172_rtc_read_data(unsigned long addr)
-{
- unsigned char retval;
-
- *rtc_adr_reg = addr;
- retval = *rtc_dat_reg;
- return retval;
-}
-
-void it8172_rtc_write_data(unsigned char data, unsigned long addr)
-{
- *rtc_adr_reg = addr;
- *rtc_dat_reg = data;
-}
-
-#undef CMOS_READ
-#undef CMOS_WRITE
-#define CMOS_READ(addr) it8172_rtc_read_data(addr)
-#define CMOS_WRITE(data, addr) it8172_rtc_write_data(data, addr)
-
-static unsigned char saved_control; /* remember rtc control reg */
-static inline int rtc_24h(void) { return saved_control & RTC_24H; }
-static inline int rtc_dm_binary(void) { return saved_control & RTC_DM_BINARY; }
-
-static inline unsigned char
-bin_to_hw(unsigned char c)
-{
- if (rtc_dm_binary())
- return c;
- else
- return ((c/10) << 4) + (c%10);
-}
-
-static inline unsigned char
-hw_to_bin(unsigned char c)
-{
- if (rtc_dm_binary())
- return c;
- else
- return (c>>4)*10 + (c &0xf);
-}
-
-/* 0x80 bit indicates pm in 12-hour format */
-static inline unsigned char
-hour_bin_to_hw(unsigned char c)
-{
- if (rtc_24h())
- return bin_to_hw(c);
- if (c >= 12)
- return 0x80 | bin_to_hw((c==12)?12:c-12); /* 12 is 12pm */
- else
- return bin_to_hw((c==0)?12:c); /* 0 is 12 AM, not 0 am */
-}
-
-static inline unsigned char
-hour_hw_to_bin(unsigned char c)
-{
- unsigned char tmp = hw_to_bin(c&0x3f);
- if (rtc_24h())
- return tmp;
- if (c & 0x80)
- return (tmp==12)?12:tmp+12; /* 12pm is 12, not 24 */
- else
- return (tmp==12)?0:tmp; /* 12am is 0 */
-}
-
-static unsigned long r4k_offset; /* Amount to increment compare reg each time */
-static unsigned long r4k_cur; /* What counter should be at next timer irq */
-extern unsigned int mips_hpt_frequency;
-
-/*
- * Figure out the r4k offset, the amount to increment the compare
- * register for each time tick.
- * Use the RTC to calculate offset.
- */
-static unsigned long __init cal_r4koff(void)
-{
- unsigned int flags;
-
- local_irq_save(flags);
-
- /* Start counter exactly on falling edge of update flag */
- while (CMOS_READ(RTC_REG_A) & RTC_UIP);
- while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
-
- /* Start r4k counter. */
- write_c0_count(0);
-
- /* Read counter exactly on falling edge of update flag */
- while (CMOS_READ(RTC_REG_A) & RTC_UIP);
- while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
-
- mips_hpt_frequency = read_c0_count();
-
- /* restore interrupts */
- local_irq_restore(flags);
-
- return (mips_hpt_frequency / HZ);
-}
-
-static unsigned long
-it8172_rtc_get_time(void)
-{
- unsigned int year, mon, day, hour, min, sec;
- unsigned int flags;
-
- /* avoid update-in-progress. */
- for (;;) {
- local_irq_save(flags);
- if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
- break;
- /* don't hold intr closed all the time */
- local_irq_restore(flags);
- }
-
- /* Read regs. */
- sec = hw_to_bin(CMOS_READ(RTC_SECONDS));
- min = hw_to_bin(CMOS_READ(RTC_MINUTES));
- hour = hour_hw_to_bin(CMOS_READ(RTC_HOURS));
- day = hw_to_bin(CMOS_READ(RTC_DAY_OF_MONTH));
- mon = hw_to_bin(CMOS_READ(RTC_MONTH));
- year = hw_to_bin(CMOS_READ(RTC_YEAR)) +
- hw_to_bin(*rtc_century_reg) * 100;
-
- /* restore interrupts */
- local_irq_restore(flags);
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-static int
-it8172_rtc_set_time(unsigned long t)
-{
- struct rtc_time tm;
- unsigned int flags;
-
- /* convert */
- to_tm(t, &tm);
-
- /* avoid update-in-progress. */
- for (;;) {
- local_irq_save(flags);
- if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
- break;
- /* don't hold intr closed all the time */
- local_irq_restore(flags);
- }
-
- *rtc_century_reg = bin_to_hw(tm.tm_year/100);
- CMOS_WRITE(bin_to_hw(tm.tm_sec), RTC_SECONDS);
- CMOS_WRITE(bin_to_hw(tm.tm_min), RTC_MINUTES);
- CMOS_WRITE(hour_bin_to_hw(tm.tm_hour), RTC_HOURS);
- CMOS_WRITE(bin_to_hw(tm.tm_mday), RTC_DAY_OF_MONTH);
- CMOS_WRITE(bin_to_hw(tm.tm_mon+1), RTC_MONTH); /* tm_mon starts from 0 */
- CMOS_WRITE(bin_to_hw(tm.tm_year%100), RTC_YEAR);
-
- /* restore interrupts */
- local_irq_restore(flags);
-
- return 0;
-}
-
-void __init it8172_time_init(void)
-{
- unsigned int est_freq, flags;
-
- local_irq_save(flags);
-
- saved_control = CMOS_READ(RTC_CONTROL);
-
- printk("calculating r4koff... ");
- r4k_offset = cal_r4koff();
- printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
-
- est_freq = 2*r4k_offset*HZ;
- est_freq += 5000; /* round */
- est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
-
- local_irq_restore(flags);
-
- rtc_mips_get_time = it8172_rtc_get_time;
- rtc_mips_set_time = it8172_rtc_set_time;
-}
-
-#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
- puts("timer_setup\n");
- put32(NR_IRQS);
- puts("");
- /* we are using the cpu counter for timer interrupts */
- setup_irq(MIPS_CPU_TIMER_IRQ, irq);
-
- /* to generate the first timer interrupt */
- r4k_cur = (read_c0_count() + r4k_offset);
- write_c0_compare(r4k_cur);
- set_c0_status(ALLINTS);
-}
diff --git a/arch/mips/ite-boards/ivr/Makefile b/arch/mips/ite-boards/ivr/Makefile
deleted file mode 100644
index e4fa6042b472..000000000000
--- a/arch/mips/ite-boards/ivr/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
-#
-# Makefile for the Globespan IVR board,
-# board-specific files.
-#
-
-obj-y += init.o
diff --git a/arch/mips/ite-boards/ivr/README b/arch/mips/ite-boards/ivr/README
deleted file mode 100644
index aa7d8db855bb..000000000000
--- a/arch/mips/ite-boards/ivr/README
+++ /dev/null
@@ -1,3 +0,0 @@
-This is not really a board made by ITE Semi, but it's very
-similar to the ITE QED-4N-S01B board. The IVR board is made
-by Globespan and it's a reference board for the PVR chip.
diff --git a/arch/mips/ite-boards/ivr/init.c b/arch/mips/ite-boards/ivr/init.c
deleted file mode 100644
index 05cf9218c432..000000000000
--- a/arch/mips/ite-boards/ivr/init.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * IVR board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/sections.h>
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_dbg.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-
-extern void __init prom_init_cmdline(void);
-extern unsigned long __init prom_get_memsize(void);
-extern void __init it8172_init_ram_resource(unsigned long memsize);
-
-const char *get_system_type(void)
-{
- return "Globespan IVR";
-}
-
-void __init prom_init(void)
-{
- unsigned long mem_size;
- unsigned long pcicr;
-
- prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (int *) fw_arg3;
-
- mips_machgroup = MACH_GROUP_GLOBESPAN;
- mips_machtype = MACH_IVR; /* Globespan's iTVC15 reference board */
-
- prom_init_cmdline();
-
- /* pmon does not set memsize */
- mem_size = prom_get_memsize();
- mem_size = mem_size << 20;
-
- /*
- * make the entire physical memory visible to pci bus masters
- */
- IT_READ(IT_MC_PCICR, pcicr);
- pcicr &= ~0x1f;
- pcicr |= (mem_size - 1) >> 22;
- IT_WRITE(IT_MC_PCICR, pcicr);
-
- it8172_init_ram_resource(mem_size);
- add_memory_region(0, mem_size, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/ite-boards/qed-4n-s01b/Makefile b/arch/mips/ite-boards/qed-4n-s01b/Makefile
deleted file mode 100644
index bb9972ad9c45..000000000000
--- a/arch/mips/ite-boards/qed-4n-s01b/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
-#
-# Makefile for the ITE 8172 (qed-4n-s01b) board, board
-# specific files.
-#
-
-obj-y := init.o
diff --git a/arch/mips/ite-boards/qed-4n-s01b/README b/arch/mips/ite-boards/qed-4n-s01b/README
deleted file mode 100644
index fb4b5197e800..000000000000
--- a/arch/mips/ite-boards/qed-4n-s01b/README
+++ /dev/null
@@ -1,2 +0,0 @@
-This is an ITE (www.iteusa.com) eval board for the ITE 8172G
-system controller, with a QED 5231 CPU.
diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c
deleted file mode 100644
index ea2a754cafe5..000000000000
--- a/arch/mips/ite-boards/qed-4n-s01b/init.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * IT8172/QED5231 board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/sections.h>
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_dbg.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-
-extern void __init prom_init_cmdline(void);
-extern unsigned long __init prom_get_memsize(void);
-extern void __init it8172_init_ram_resource(unsigned long memsize);
-
-const char *get_system_type(void)
-{
- return "ITE QED-4N-S01B";
-}
-
-void __init prom_init(void)
-{
- unsigned long mem_size;
- unsigned long pcicr;
-
- prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (int *) fw_arg3;
-
- mips_machgroup = MACH_GROUP_ITE;
- mips_machtype = MACH_QED_4N_S01B; /* ITE board name/number */
-
- prom_init_cmdline();
- mem_size = prom_get_memsize();
-
- printk("Memory size: %dMB\n", (unsigned)mem_size);
-
- mem_size <<= 20; /* MB */
-
- /*
- * make the entire physical memory visible to pci bus masters
- */
- IT_READ(IT_MC_PCICR, pcicr);
- pcicr &= ~0x1f;
- pcicr |= (mem_size - 1) >> 22;
- IT_WRITE(IT_MC_PCICR, pcicr);
-
- it8172_init_ram_resource(mem_size);
- add_memory_region(0, mem_size, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index edefa97b2330..3cf0dd4ba548 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -7,7 +7,6 @@ obj-y += pci.o
#
# PCI bus host bridge specific code
#
-obj-$(CONFIG_ITE_BOARD_GEN) += ops-it8172.o
obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o
obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o
@@ -28,8 +27,6 @@ obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o
-obj-$(CONFIG_MIPS_ITE8172) += fixup-ite8172g.o
-obj-$(CONFIG_MIPS_IVR) += fixup-ivr.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
diff --git a/arch/mips/pci/fixup-ite8172g.c b/arch/mips/pci/fixup-ite8172g.c
deleted file mode 100644
index 2290ea4228dd..000000000000
--- a/arch/mips/pci/fixup-ite8172g.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Board specific pci fixups.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_pci.h>
-#include <asm/it8172/it8172_int.h>
-
-/*
- * Shortcuts
- */
-#define INTA IT8172_PCI_INTA_IRQ
-#define INTB IT8172_PCI_INTB_IRQ
-#define INTC IT8172_PCI_INTC_IRQ
-#define INTD IT8172_PCI_INTD_IRQ
-
-static const int internal_func_irqs[7] __initdata = {
- IT8172_AC97_IRQ,
- IT8172_DMA_IRQ,
- IT8172_CDMA_IRQ,
- IT8172_USB_IRQ,
- IT8172_BRIDGE_MASTER_IRQ,
- IT8172_IDE_IRQ,
- IT8172_MC68K_IRQ
-};
-
-static char irq_tab_ite8172g[][5] __initdata = {
- [0x10] = { 0, INTA, INTB, INTC, INTD },
- [0x11] = { 0, INTA, INTB, INTC, INTD },
- [0x12] = { 0, INTB, INTC, INTD, INTA },
- [0x13] = { 0, INTC, INTD, INTA, INTB },
- [0x14] = { 0, INTD, INTA, INTB, INTC },
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- /*
- * Internal device 1 is actually 7 different internal devices on the
- * IT8172G (a multifunction device).
- */
- if (slot == 1)
- return internal_func_irqs[PCI_FUNC(dev->devfn)];
-
- return irq_tab_ite8172g[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/fixup-ivr.c b/arch/mips/pci/fixup-ivr.c
deleted file mode 100644
index 0c7c16464c11..000000000000
--- a/arch/mips/pci/fixup-ivr.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Globespan IVR board-specific pci fixups.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_pci.h>
-#include <asm/it8172/it8172_int.h>
-
-/*
- * Shortcuts
- */
-#define INTA IT8172_PCI_INTA_IRQ
-#define INTB IT8172_PCI_INTB_IRQ
-#define INTC IT8172_PCI_INTC_IRQ
-#define INTD IT8172_PCI_INTD_IRQ
-
-static const int internal_func_irqs[7] __initdata = {
- IT8172_AC97_IRQ,
- IT8172_DMA_IRQ,
- IT8172_CDMA_IRQ,
- IT8172_USB_IRQ,
- IT8172_BRIDGE_MASTER_IRQ,
- IT8172_IDE_IRQ,
- IT8172_MC68K_IRQ
-};
-
-static char irq_tab_ivr[][5] __initdata = {
- [0x11] = { INTC, INTC, INTD, INTA, INTB }, /* Realtek RTL-8139 */
- [0x12] = { INTB, INTB, INTB, INTC, INTC }, /* IVR slot */
- [0x13] = { INTA, INTA, INTB, INTC, INTD } /* Expansion slot */
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (slot == 1)
- return internal_func_irqs[PCI_FUNC(dev->devfn)];
-
- return irq_tab_ivr[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/ops-it8172.c b/arch/mips/pci/ops-it8172.c
deleted file mode 100644
index ba8328505a0a..000000000000
--- a/arch/mips/pci/ops-it8172.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * IT8172 system controller specific pci support.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_pci.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-static struct resource pci_mem_resource_1;
-
-static struct resource pci_io_resource = {
- .start = 0x14018000,
- .end = 0x17FFFFFF,
- .name = "io pci IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource_0 = {
- .start = 0x10101000,
- .end = 0x13FFFFFF,
- .name = "ext pci memory space 0/1",
- .flags = IORESOURCE_MEM,
- .parent = &pci_mem_resource_0,
- .sibling = NULL,
- .child = &pci_mem_resource_1
-};
-
-static struct resource pci_mem_resource_1 = {
- .start = 0x1A000000,
- .end = 0x1FBFFFFF,
- .name = "ext pci memory space 2/3",
- .flags = IORESOURCE_MEM,
- .parent = &pci_mem_resource_0
-};
-
-extern struct pci_ops it8172_pci_ops;
-
-struct pci_controller it8172_controller = {
- .pci_ops = &it8172_pci_ops,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource_0,
-};
-
-static int it8172_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus,
- unsigned int devfn, int where,
- u32 * data)
-{
- /*
- * config cycles are on 4 byte boundary only
- */
-
- /* Setup address */
- IT_WRITE(IT_CONFADDR, (bus->number << IT_BUSNUM_SHF) |
- (devfn << IT_FUNCNUM_SHF) | (where & ~0x3));
-
- if (access_type == PCI_ACCESS_WRITE) {
- IT_WRITE(IT_CONFDATA, *data);
- } else {
- IT_READ(IT_CONFDATA, *data);
- }
-
- /*
- * Revisit: check for master or target abort.
- */
- return 0;
-}
-
-
-/*
- * We can't address 8 and 16 bit words directly. Instead we have to
- * read/write a 32bit word and mask/modify the data we actually want.
- */
-static write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- u32 data = 0;
-
- switch (size) {
- case 1:
- if (it8172_pcibios_config_access
- (PCI_ACCESS_READ, dev, where, &data))
- return -1;
-
- *val = (data >> ((where & 3) << 3)) & 0xff;
-
- return PCIBIOS_SUCCESSFUL;
-
- case 2:
-
- if (where & 1)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (it8172_pcibios_config_access
- (PCI_ACCESS_READ, dev, where, &data))
- return -1;
-
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- DBG("cfg read word: bus %d dev_fn %x where %x: val %x\n",
- dev->bus->number, dev->devfn, where, *val);
-
- return PCIBIOS_SUCCESSFUL;
-
- case 4:
-
- if (where & 3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (it8172_pcibios_config_access
- (PCI_ACCESS_READ, dev, where, &data))
- return -1;
-
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
- }
-}
-
-
-static write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- u32 data = 0;
-
- switch (size) {
- case 1:
- if (it8172_pcibios_config_access
- (PCI_ACCESS_READ, dev, where, &data))
- return -1;
-
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (it8172_pcibios_config_access
- (PCI_ACCESS_WRITE, dev, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-
- case 2:
- if (where & 1)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (it8172_pcibios_config_access
- (PCI_ACCESS_READ, dev, where, &data))
- eturn - 1;
-
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (it8172_pcibios_config_access
- (PCI_ACCESS_WRITE, dev, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-
- case 4:
- if (where & 3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if (it8172_pcibios_config_access
- (PCI_ACCESS_WRITE, dev, where, &val))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
- }
-}
-
-struct pci_ops it8172_pci_ops = {
- .read = read_config,
- .write = write_config,
-};