summaryrefslogtreecommitdiff
path: root/arch/mips/txx9/rbtx4938/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/txx9/rbtx4938/setup.c')
-rw-r--r--arch/mips/txx9/rbtx4938/setup.c63
1 files changed, 55 insertions, 8 deletions
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index 9ab48dec0fe8..e077cc4d3a59 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/mtd/physmap.h>
#include <asm/reboot.h>
#include <asm/io.h>
@@ -110,6 +111,7 @@ static void __init rbtx4938_pci_setup(void)
#define SEEPROM2_CS 0 /* IOC */
#define SEEPROM3_CS 1 /* IOC */
#define SRTC_CS 2 /* IOC */
+#define SPI_BUSNO 0
static int __init rbtx4938_ethaddr_init(void)
{
@@ -119,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void)
int i;
/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
- if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+ if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
printk(KERN_ERR "seeprom: read error.\n");
return -ENODEV;
} else {
@@ -173,23 +175,30 @@ static void __init rbtx4938_mem_setup(void)
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
- printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
+ pr_info("PIOSEL: disabling both ATA and NAND selection\n");
txx9_clear64(&tx4938_ccfgptr->pcfg,
TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
- printk(KERN_INFO "PIOSEL: enabling nand selection\n");
+ pr_info("PIOSEL: enabling NAND selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
- printk(KERN_INFO "PIOSEL: enabling ata selection\n");
+ pr_info("PIOSEL: enabling ATA selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
+ pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+ pr_info("PIOSEL: NAND %s, ATA %s\n",
+ (pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
+ (pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
+#endif
+
rbtx4938_spi_setup();
pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */
/* fixup piosel */
@@ -279,9 +288,9 @@ static int __init rbtx4938_spi_init(void)
.mode = SPI_MODE_1 | SPI_CS_HIGH,
};
spi_register_board_info(&srtc_info, 1);
- spi_eeprom_register(SEEPROM1_CS);
- spi_eeprom_register(16 + SEEPROM2_CS);
- spi_eeprom_register(16 + SEEPROM3_CS);
+ spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
+ spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
+ spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
gpio_request(16 + SRTC_CS, "rtc-rs5c348");
gpio_direction_output(16 + SRTC_CS, 0);
gpio_request(SEEPROM1_CS, "seeprom1");
@@ -290,10 +299,46 @@ static int __init rbtx4938_spi_init(void)
gpio_direction_output(16 + SEEPROM2_CS, 1);
gpio_request(16 + SEEPROM3_CS, "seeprom3");
gpio_direction_output(16 + SEEPROM3_CS, 1);
- tx4938_spi_init(0);
+ tx4938_spi_init(SPI_BUSNO);
return 0;
}
+static void __init rbtx4938_mtd_init(void)
+{
+ struct physmap_flash_data pdata = {
+ .width = 4,
+ };
+
+ switch (readb(rbtx4938_bdipsw_addr) & 7) {
+ case 0:
+ /* Boot */
+ txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+ break;
+ case 1:
+ /* System */
+ txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+ /* Boot */
+ txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
+ break;
+ case 2:
+ /* Ext */
+ txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
+ /* Boot */
+ txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
+ break;
+ case 3:
+ /* Boot */
+ txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
+ /* System */
+ txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
+ break;
+ }
+}
+
static void __init rbtx4938_arch_init(void)
{
gpiochip_add(&rbtx4938_spi_gpio_chip);
@@ -306,6 +351,8 @@ static void __init rbtx4938_device_init(void)
rbtx4938_ethaddr_init();
rbtx4938_ne_init();
tx4938_wdt_init();
+ rbtx4938_mtd_init();
+ txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
}
struct txx9_board_vec rbtx4938_vec __initdata = {