summaryrefslogtreecommitdiff
path: root/arch/m68k/coldfire/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/coldfire/head.S')
-rw-r--r--arch/m68k/coldfire/head.S298
1 files changed, 298 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S
new file mode 100644
index 000000000000..fa31be297b85
--- /dev/null
+++ b/arch/m68k/coldfire/head.S
@@ -0,0 +1,298 @@
+/*****************************************************************************/
+
+/*
+ * head.S -- common startup code for ColdFire CPUs.
+ *
+ * (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
+ */
+
+/*****************************************************************************/
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfmmu.h>
+#include <asm/thread_info.h>
+
+/*****************************************************************************/
+
+/*
+ * If we don't have a fixed memory size, then lets build in code
+ * to auto detect the DRAM size. Obviously this is the preferred
+ * method, and should work for most boards. It won't work for those
+ * that do not have their RAM starting at address 0, and it only
+ * works on SDRAM (not boards fitted with SRAM).
+ */
+#if CONFIG_RAMSIZE != 0
+.macro GET_MEM_SIZE
+ movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */
+.endm
+
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+/*
+ * Not all these devices have exactly the same DRAM controller,
+ * but the DCMR register is virtually identical - give or take
+ * a couple of bits. The only exception is the 5272 devices, their
+ * DRAM controller is quite different.
+ */
+.macro GET_MEM_SIZE
+ movel MCFSIM_DMR0,%d0 /* get mask for 1st bank */
+ btst #0,%d0 /* check if region enabled */
+ beq 1f
+ andl #0xfffc0000,%d0
+ beq 1f
+ addl #0x00040000,%d0 /* convert mask to size */
+1:
+ movel MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
+ btst #0,%d1 /* check if region enabled */
+ beq 2f
+ andl #0xfffc0000,%d1
+ beq 2f
+ addl #0x00040000,%d1
+ addl %d1,%d0 /* total mem size in d0 */
+2:
+.endm
+
+#elif defined(CONFIG_M5272)
+.macro GET_MEM_SIZE
+ movel MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
+ andil #0xfffff000,%d0 /* mask out chip select options */
+ negl %d0 /* negate bits */
+.endm
+
+#elif defined(CONFIG_M520x)
+.macro GET_MEM_SIZE
+ clrl %d0
+ movel MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */
+ andl #0x1f, %d2 /* Get only the chip select size */
+ beq 3f /* Check if it is enabled */
+ addql #1, %d2 /* Form exponent */
+ moveql #1, %d0
+ lsll %d2, %d0 /* 2 ^ exponent */
+3:
+ movel MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */
+ andl #0x1f, %d2 /* Get only the chip select size */
+ beq 4f /* Check if it is enabled */
+ addql #1, %d2 /* Form exponent */
+ moveql #1, %d1
+ lsll %d2, %d1 /* 2 ^ exponent */
+ addl %d1, %d0 /* Total size of SDRAM in d0 */
+4:
+.endm
+
+#else
+#error "ERROR: I don't know how to probe your boards memory size?"
+#endif
+
+/*****************************************************************************/
+
+/*
+ * Boards and platforms can do specific early hardware setup if
+ * they need to. Most don't need this, define away if not required.
+ */
+#ifndef PLATFORM_SETUP
+#define PLATFORM_SETUP
+#endif
+
+/*****************************************************************************/
+
+.global _start
+.global _rambase
+.global _ramvec
+.global _ramstart
+.global _ramend
+#if defined(CONFIG_UBOOT)
+.global _init_sp
+#endif
+
+/*****************************************************************************/
+
+.data
+
+/*
+ * During startup we store away the RAM setup. These are not in the
+ * bss, since their values are determined and written before the bss
+ * has been cleared.
+ */
+_rambase:
+.long 0
+_ramvec:
+.long 0
+_ramstart:
+.long 0
+_ramend:
+.long 0
+#if defined(CONFIG_UBOOT)
+_init_sp:
+.long 0
+#endif
+
+/*****************************************************************************/
+
+__HEAD
+
+#ifdef CONFIG_MMU
+_start0:
+ jmp _start
+.global kernel_pg_dir
+.equ kernel_pg_dir,_start0
+.equ .,_start0+0x1000
+#endif
+
+/*
+ * This is the codes first entry point. This is where it all
+ * begins...
+ */
+
+_start:
+ nop /* filler */
+ movew #0x2700, %sr /* no interrupts */
+ movel #CACHE_INIT,%d0 /* disable cache */
+ movec %d0,%CACR
+ nop
+#if defined(CONFIG_UBOOT)
+ movel %sp,_init_sp /* save initial stack pointer */
+#endif
+#ifdef CONFIG_MBAR
+ movel #CONFIG_MBAR+1,%d0 /* configured MBAR address */
+ movec %d0,%MBAR /* set it */
+#endif
+
+ /*
+ * Do any platform or board specific setup now. Most boards
+ * don't need anything. Those exceptions are define this in
+ * their board specific includes.
+ */
+ PLATFORM_SETUP
+
+ /*
+ * Create basic memory configuration. Set VBR accordingly,
+ * and size memory.
+ */
+ movel #CONFIG_VECTORBASE,%a7
+ movec %a7,%VBR /* set vectors addr */
+ movel %a7,_ramvec
+
+ movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */
+ movel %a7,_rambase
+
+ GET_MEM_SIZE /* macro code determines size */
+ addl %a7,%d0
+ movel %d0,_ramend /* set end ram addr */
+
+ /*
+ * Now that we know what the memory is, lets enable cache
+ * and get things moving. This is Coldfire CPU specific. Not
+ * all version cores have identical cache register setup. But
+ * it is very similar. Define the exact settings in the headers
+ * then the code here is the same for all.
+ */
+ movel #ACR0_MODE,%d0 /* set RAM region for caching */
+ movec %d0,%ACR0
+ movel #ACR1_MODE,%d0 /* anything else to cache? */
+ movec %d0,%ACR1
+#ifdef ACR2_MODE
+ movel #ACR2_MODE,%d0
+ movec %d0,%ACR2
+ movel #ACR3_MODE,%d0
+ movec %d0,%ACR3
+#endif
+ movel #CACHE_MODE,%d0 /* enable cache */
+ movec %d0,%CACR
+ nop
+
+#ifdef CONFIG_MMU
+ /*
+ * Identity mapping for the kernel region.
+ */
+ movel #(MMUBASE+1),%d0 /* enable MMUBAR registers */
+ movec %d0,%MMUBAR
+ movel #MMUOR_CA,%d0 /* clear TLB entries */
+ movel %d0,MMUOR
+ movel #0,%d0 /* set ASID to 0 */
+ movec %d0,%asid
+
+ movel #MMUCR_EN,%d0 /* Enable the identity map */
+ movel %d0,MMUCR
+ nop /* sync i-pipeline */
+
+ movel #_vstart,%a0 /* jump to "virtual" space */
+ jmp %a0@
+_vstart:
+#endif /* CONFIG_MMU */
+
+#ifdef CONFIG_ROMFS_FS
+ /*
+ * Move ROM filesystem above bss :-)
+ */
+ lea __bss_start,%a0 /* get start of bss */
+ lea __bss_stop,%a1 /* set up destination */
+ movel %a0,%a2 /* copy of bss start */
+
+ movel 8(%a0),%d0 /* get size of ROMFS */
+ addql #8,%d0 /* allow for rounding */
+ andl #0xfffffffc, %d0 /* whole words */
+
+ addl %d0,%a0 /* copy from end */
+ addl %d0,%a1 /* copy from end */
+ movel %a1,_ramstart /* set start of ram */
+
+_copy_romfs:
+ movel -(%a0),%d0 /* copy dword */
+ movel %d0,-(%a1)
+ cmpl %a0,%a2 /* check if at end */
+ bne _copy_romfs
+
+#else /* CONFIG_ROMFS_FS */
+ lea __bss_stop,%a1
+ movel %a1,_ramstart
+#endif /* CONFIG_ROMFS_FS */
+
+
+ /*
+ * Zero out the bss region.
+ */
+ lea __bss_start,%a0 /* get start of bss */
+ lea __bss_stop,%a1 /* get end of bss */
+ clrl %d0 /* set value */
+_clear_bss:
+ movel %d0,(%a0)+ /* clear each word */
+ cmpl %a0,%a1 /* check if at end */
+ bne _clear_bss
+
+ /*
+ * Load the current task pointer and stack.
+ */
+ lea init_thread_union,%a0
+ lea THREAD_SIZE(%a0),%sp
+
+#ifdef CONFIG_MMU
+.global m68k_cputype
+.global m68k_mmutype
+.global m68k_fputype
+.global m68k_machtype
+ movel #CPU_COLDFIRE,%d0
+ movel %d0,m68k_cputype /* Mark us as a ColdFire */
+ movel #MMU_COLDFIRE,%d0
+ movel %d0,m68k_mmutype
+ movel #FPU_COLDFIRE,%d0
+ movel %d0,m68k_fputype
+ movel #MACH_M54XX,%d0
+ movel %d0,m68k_machtype /* Mark us as a 54xx machine */
+ lea init_task,%a2 /* Set "current" init task */
+#endif
+
+ /*
+ * Assember start up done, start code proper.
+ */
+ jsr start_kernel /* start Linux kernel */
+
+_exit:
+ jmp _exit /* should never get here */
+
+/*****************************************************************************/