diff options
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r-- | arch/blackfin/mach-bf533/Makefile | 4 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/boards/cm_bf533.c | 14 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/boards/ezkit.c | 8 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/boards/generic_board.c | 6 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/boards/stamp.c | 30 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/cpu.c | 3 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/head.S | 5 | ||||
-rw-r--r-- | arch/blackfin/mach-bf533/ints-priority.c | 2 |
8 files changed, 38 insertions, 34 deletions
diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile index 76d2c2b8579a..8cce1736360d 100644 --- a/arch/blackfin/mach-bf533/Makefile +++ b/arch/blackfin/mach-bf533/Makefile @@ -4,6 +4,6 @@ extra-y := head.o -obj-y := ints-priority.o +obj-y := ints-priority.o dma.o -obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o +obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index edd31ce4f8d2..4545f363e641 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -34,7 +34,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -51,11 +51,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -98,7 +98,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, - },{ + }, { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ .bus_num = 1, /* Framework bus number */ @@ -145,7 +145,7 @@ static struct resource smc91x_resources[] = { .start = 0x20200300, .end = 0x20200300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF0, .end = IRQ_PF0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -194,11 +194,11 @@ static struct resource isp1362_hcd_resources[] = { .start = 0x20308000, .end = 0x20308000, .flags = IORESOURCE_MEM, - },{ + }, { .start = 0x20308004, .end = 0x20308004, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ, diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 0b522d95160d..0000b8f1239c 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -35,7 +35,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -61,7 +61,7 @@ static struct resource smc91x_resources[] = { .start = 0x20310300, .end = 0x20310300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF9, .end = IRQ_PF9, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -85,11 +85,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index c0f43ccfbfb5..9bc1f0d0ab50 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -30,7 +30,7 @@ #include <linux/device.h> #include <linux/platform_device.h> -#include <asm/irq.h> +#include <linux/irq.h> /* * Name the Board for the /proc/cpuinfo @@ -53,11 +53,11 @@ static struct resource smc91x_resources[] = { .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PROG_INTB, .end = IRQ_PROG_INTB, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - },{ + }, { /* * denotes the flag pin and is used directly if * CONFIG_IRQCHIP_DEMUX_GPIO is defined. diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 9a472fe15833..a9143c4cbdcd 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -37,7 +37,7 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> #endif -#include <asm/irq.h> +#include <linux/irq.h> #include <asm/bfin5xx_spi.h> /* @@ -62,7 +62,7 @@ static struct resource smc91x_resources[] = { .start = 0x20300300, .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -83,7 +83,7 @@ static struct resource net2272_bfin_resources[] = { .start = 0x20300000, .end = 0x20300000 + 0x100, .flags = IORESOURCE_MEM, - },{ + }, { .start = IRQ_PF10, .end = IRQ_PF10, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -108,11 +108,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM - },{ + }, { .name = "kernel", .size = 0xe0000, .offset = 0x20000 - },{ + }, { .name = "file system", .size = 0x700000, .offset = 0x00100000, @@ -229,19 +229,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_PBX) { - .modalias = "fxs-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, - .controller_data= &spi_si3xxx_chip_info, + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 3, + .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { - .modalias = "fxo-spi", - .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, - .controller_data= &spi_si3xxx_chip_info, + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, #endif diff --git a/arch/blackfin/mach-bf533/cpu.c b/arch/blackfin/mach-bf533/cpu.c index 99547c4c290e..6fd9cfd0a31b 100644 --- a/arch/blackfin/mach-bf533/cpu.c +++ b/arch/blackfin/mach-bf533/cpu.c @@ -79,8 +79,7 @@ static int bf533_target(struct cpufreq_policy *policy, int i; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target - (policy, bf533_freq_table, target_freq, relation, &index)) + if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index)) return -EINVAL; cclk_mhz = bf533_freq_table[index].frequency; vco_mhz = bf533_freq_table[index].index; diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 7e2aa8d0f44f..7dd0e9c3a936 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -30,6 +30,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> +#include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach/mem_init.h> #endif @@ -96,6 +97,10 @@ ENTRY(__start) M2 = r0; M3 = r0; + trace_buffer_start(p0,r0); + P0 = R1; + R0 = R1; + #if CONFIG_DEBUG_KERNEL_START /* diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c index a3e1789167be..7d79e0f9503d 100644 --- a/arch/blackfin/mach-bf533/ints-priority.c +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -28,8 +28,8 @@ */ #include <linux/module.h> +#include <linux/irq.h> #include <asm/blackfin.h> -#include <asm/irq.h> void program_IAR(void) { |