summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/board-mackerel.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-shmobile/board-mackerel.c')
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c1200
1 files changed, 1200 insertions, 0 deletions
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
new file mode 100644
index 000000000000..5bcf5c1e1399
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -0,0 +1,1200 @@
+/*
+ * mackerel board support
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on ap4evb
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/smsc911x.h>
+#include <linux/sh_intc.h>
+#include <linux/tca6416_keypad.h>
+#include <linux/usb/r8a66597.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
+#include <media/soc_camera_platform.h>
+#include <sound/sh_fsi.h>
+
+#include <mach/common.h>
+#include <mach/sh7372.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+/*
+ * Address Interface BusWidth note
+ * ------------------------------------------------------------------
+ * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
+ * 0x0800_0000 user area -
+ * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
+ * 0x1400_0000 Ether (LAN9220) 16bit
+ * 0x1600_0000 user area - cannot use with NAND
+ * 0x1800_0000 user area -
+ * 0x1A00_0000 -
+ * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
+ */
+
+/*
+ * CPU mode
+ *
+ * SW4 | Boot Area| Master | Remarks
+ * 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor|
+ * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
+ * ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM
+ * ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug
+ * ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug
+ * X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM
+ * OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM
+ * X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM
+ * OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone
+ * ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone
+*/
+
+/*
+ * NOR Flash ROM
+ *
+ * SW1 | SW2 | SW7 | NOR Flash ROM
+ * bit1 | bit1 bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ * OFF | ON OFF | ON | Area 0
+ * OFF | ON OFF | OFF | Area 4
+ */
+
+/*
+ * SMSC 9220
+ *
+ * SW1 SMSC 9220
+ * -----------------------
+ * ON access disable
+ * OFF access enable
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ * SW1 | SW2 | SW7 | NAND Flash ROM
+ * bit1 | bit1 bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ * OFF | ON OFF | ON | FCE 0
+ * OFF | ON OFF | OFF | FCE 1
+ */
+
+/*
+ * External interrupt pin settings
+ *
+ * IRQX | pin setting | device | level
+ * ------+--------------------+--------------------+-------
+ * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
+ * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
+ * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low
+ * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
+ * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
+ * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
+ * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High
+ */
+
+/*
+ * USB
+ *
+ * USB0 : CN22 : Function
+ * USB1 : CN31 : Function/Host *1
+ *
+ * J30 (for CN31) *1
+ * ----------+---------------+-------------
+ * 1-2 short | VBUS 5V | Host
+ * open | external VBUS | Function
+ *
+ * *1
+ * CN31 is used as Host in Linux.
+ */
+
+/*
+ * SDHI0 (CN12)
+ *
+ * SW56 : OFF
+ *
+ */
+
+/* MMC /SDHI1 (CN7)
+ *
+ * I/O voltage : 1.8v
+ *
+ * Power voltage : 1.8v or 3.3v
+ * J22 : select power voltage *1
+ * 1-2 pin : 1.8v
+ * 2-3 pin : 3.3v
+ *
+ * *1
+ * Please change J22 depends the card to be used.
+ * MMC's OCR field set to support either voltage for the card inserted.
+ *
+ * SW1 | SW33
+ * | bit1 | bit2 | bit3 | bit4
+ * -------------+------+------+------+-------
+ * MMC0 OFF | OFF | ON | ON | X
+ * MMC1 ON | OFF | ON | X | ON
+ * SDHI1 OFF | ON | X | OFF | ON
+ *
+ */
+
+/*
+ * SDHI2 (CN23)
+ *
+ * microSD card sloct
+ *
+ */
+
+/*
+ * FIXME !!
+ *
+ * gpio_no_direction
+ * are quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_no_direction(u32 addr)
+{
+ __raw_writeb(0x00, addr);
+}
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel_ro",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 8 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = 0x00000000,
+ .end = 0x08000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+/* SMSC */
+static struct resource smc911x_resources[] = {
+ {
+ .start = 0x14000000,
+ .end = 0x16000000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = evt2irq(0x02c0) /* IRQ6A */,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+ .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_info,
+ },
+};
+
+/* LCDC */
+static struct fb_videomode mackerel_lcdc_modes[] = {
+ {
+ .name = "WVGA Panel",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 70,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0,
+ },
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .lcd_cfg = mackerel_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
+ .interface_type = RGB24,
+ .clock_divider = 2,
+ .flags = 0,
+ .lcd_size_cfg.width = 152,
+ .lcd_size_cfg.height = 91,
+ }
+};
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000,
+ .end = 0xfe943fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x580),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ .resource = lcdc_resources,
+ .dev = {
+ .platform_data = &lcdc_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/* HDMI */
+static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
+ .clock_source = LCDC_CLK_EXTERNAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = RGB24,
+ .clock_divider = 1,
+ .flags = LCDC_FLAGS_DWPOL,
+ }
+};
+
+static struct resource hdmi_lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC1",
+ .start = 0xfe944000,
+ .end = 0xfe947fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x1780),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device hdmi_lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(hdmi_lcdc_resources),
+ .resource = hdmi_lcdc_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &hdmi_lcdc_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+static struct sh_mobile_hdmi_info hdmi_info = {
+ .lcd_chan = &hdmi_lcdc_info.ch[0],
+ .lcd_dev = &hdmi_lcdc_device.dev,
+ .flags = HDMI_SND_SRC_SPDIF,
+};
+
+static struct resource hdmi_resources[] = {
+ [0] = {
+ .name = "HDMI",
+ .start = 0xe6be0000,
+ .end = 0xe6be00ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* There's also an HDMI interrupt on INTCS @ 0x18e0 */
+ .start = evt2irq(0x17e0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device hdmi_device = {
+ .name = "sh-mobile-hdmi",
+ .num_resources = ARRAY_SIZE(hdmi_resources),
+ .resource = hdmi_resources,
+ .id = -1,
+ .dev = {
+ .platform_data = &hdmi_info,
+ },
+};
+
+static int __init hdmi_init_pm_clock(void)
+{
+ struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
+ int ret;
+ long rate;
+
+ if (IS_ERR(hdmi_ick)) {
+ ret = PTR_ERR(hdmi_ick);
+ pr_err("Cannot get HDMI ICK: %d\n", ret);
+ goto out;
+ }
+
+ ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
+ if (ret < 0) {
+ pr_err("Cannot set PLLC2 parent: %d, %d users\n",
+ ret, sh7372_pllc2_clk.usecount);
+ goto out;
+ }
+
+ pr_debug("PLLC2 initial frequency %lu\n",
+ clk_get_rate(&sh7372_pllc2_clk));
+
+ rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
+ if (rate < 0) {
+ pr_err("Cannot get suitable rate: %ld\n", rate);
+ ret = rate;
+ goto out;
+ }
+
+ ret = clk_set_rate(&sh7372_pllc2_clk, rate);
+ if (ret < 0) {
+ pr_err("Cannot set rate %ld: %d\n", rate, ret);
+ goto out;
+ }
+
+ ret = clk_enable(&sh7372_pllc2_clk);
+ if (ret < 0) {
+ pr_err("Cannot enable pllc2 clock\n");
+ goto out;
+ }
+
+ pr_debug("PLLC2 set frequency %lu\n", rate);
+
+ ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
+ if (ret < 0) {
+ pr_err("Cannot set HDMI parent: %d\n", ret);
+ goto out;
+ }
+
+out:
+ if (!IS_ERR(hdmi_ick))
+ clk_put(hdmi_ick);
+ return ret;
+}
+device_initcall(hdmi_init_pm_clock);
+
+/* USB1 (Host) */
+static void usb1_host_port_power(int port, int power)
+{
+ if (!power) /* only power-on is supported for now */
+ return;
+
+ /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
+ __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+ .on_chip = 1,
+ .port_power = usb1_host_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+ [0] = {
+ .name = "USBHS",
+ .start = 0xE68B0000,
+ .end = 0xE68B00E6 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb1_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 1,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usb1_host_data,
+ },
+ .num_resources = ARRAY_SIZE(usb1_host_resources),
+ .resource = usb1_host_resources,
+};
+
+/* LED */
+static struct gpio_led mackerel_leds[] = {
+ {
+ .name = "led0",
+ .gpio = GPIO_PORT0,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "led1",
+ .gpio = GPIO_PORT1,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "led2",
+ .gpio = GPIO_PORT2,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+ {
+ .name = "led3",
+ .gpio = GPIO_PORT159,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }
+};
+
+static struct gpio_led_platform_data mackerel_leds_pdata = {
+ .leds = mackerel_leds,
+ .num_leds = ARRAY_SIZE(mackerel_leds),
+};
+
+static struct platform_device leds_device = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &mackerel_leds_pdata,
+ },
+};
+
+/* FSI */
+#define IRQ_FSI evt2irq(0x1840)
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+ int ret;
+
+ if (rate <= 0)
+ return 0;
+
+ if (!enable) {
+ clk_disable(clk);
+ return 0;
+ }
+
+ ret = clk_set_rate(clk, clk_round_rate(clk, rate));
+ if (ret < 0)
+ return ret;
+
+ return clk_enable(clk);
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+ struct clk *fsib_clk;
+ struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+ long fsib_rate = 0;
+ long fdiv_rate = 0;
+ int ackmd_bpfmd;
+ int ret;
+
+ /* FSIA is slave mode. nothing to do here */
+ if (is_porta)
+ return 0;
+
+ /* clock start */
+ switch (rate) {
+ case 44100:
+ fsib_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ case 48000:
+ fsib_rate = 85428000; /* around 48kHz x 256 x 7 */
+ fdiv_rate = rate * 256;
+ ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+ break;
+ default:
+ pr_err("unsupported rate in FSI2 port B\n");
+ return -EINVAL;
+ }
+
+ /* FSI B setting */
+ fsib_clk = clk_get(dev, "ickb");
+ if (IS_ERR(fsib_clk))
+ return -EIO;
+
+ /* fsib */
+ ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
+ if (ret < 0)
+ goto fsi_set_rate_end;
+
+ /* FSI DIV */
+ ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+ if (ret < 0) {
+ /* disable FSI B */
+ if (enable)
+ __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+ goto fsi_set_rate_end;
+ }
+
+ ret = ackmd_bpfmd;
+
+fsi_set_rate_end:
+ clk_put(fsib_clk);
+ return ret;
+}
+
+static struct sh_fsi_platform_info fsi_info = {
+ .porta_flags = SH_FSI_BRS_INV |
+ SH_FSI_OUT_SLAVE_MODE |
+ SH_FSI_IN_SLAVE_MODE |
+ SH_FSI_OFMT(PCM) |
+ SH_FSI_IFMT(PCM),
+
+ .portb_flags = SH_FSI_BRS_INV |
+ SH_FSI_BRM_INV |
+ SH_FSI_LRS_INV |
+ SH_FSI_OFMT(SPDIF),
+
+ .set_rate = fsi_set_rate,
+};
+
+static struct resource fsi_resources[] = {
+ [0] = {
+ .name = "FSI",
+ .start = 0xFE3C0000,
+ .end = 0xFE3C0400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FSI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device fsi_device = {
+ .name = "sh_fsi2",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fsi_resources),
+ .resource = fsi_resources,
+ .dev = {
+ .platform_data = &fsi_info,
+ },
+};
+
+static struct platform_device fsi_ak4643_device = {
+ .name = "sh_fsi2_a_ak4643",
+};
+
+/*
+ * The card detect pin of the top SD/MMC slot (CN7) is active low and is
+ * connected to GPIO A22 of SH7372 (GPIO_PORT41).
+ */
+static int slot_cn7_get_cd(struct platform_device *pdev)
+{
+ if (gpio_is_valid(GPIO_PORT41))
+ return !gpio_get_value(GPIO_PORT41);
+ else
+ return -ENXIO;
+}
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0xe6850000,
+ .end = 0xe68501ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e00) /* SDHI0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+};
+
+#if !defined(CONFIG_MMC_SH_MMCIF)
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
+ .tmio_ocr_mask = MMC_VDD_165_195,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_NEEDS_POLL,
+ .get_cd = slot_cn7_get_cd,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xe6860000,
+ .end = 0xe68601ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0e80),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+};
+#endif
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_NEEDS_POLL,
+};
+
+static struct resource sdhi2_resources[] = {
+ [0] = {
+ .name = "SDHI2",
+ .start = 0xe6870000,
+ .end = 0xe68701ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1200),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi2_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi2_resources),
+ .resource = sdhi2_resources,
+ .id = 2,
+ .dev = {
+ .platform_data = &sdhi2_info,
+ },
+};
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+ [0] = {
+ .name = "MMCIF",
+ .start = 0xE6BD0000,
+ .end = 0xE6BD00FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* MMC ERR */
+ .start = evt2irq(0x1ac0),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* MMC NOR */
+ .start = evt2irq(0x1ae0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .sup_pclk = 0,
+ .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NEEDS_POLL,
+ .get_cd = slot_cn7_get_cd,
+};
+
+static struct platform_device sh_mmcif_device = {
+ .name = "sh_mmcif",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh_mmcif_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_mmcif_resources),
+ .resource = sh_mmcif_resources,
+};
+
+
+static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev);
+static void mackerel_camera_del(struct soc_camera_link *icl);
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+ int enable)
+{
+ return 0; /* camera sensor always enabled */
+}
+
+static struct soc_camera_platform_info camera_info = {
+ .format_name = "UYVY",
+ .format_depth = 16,
+ .format = {
+ .code = V4L2_MBUS_FMT_UYVY8_2X8,
+ .colorspace = V4L2_COLORSPACE_SMPTE170M,
+ .field = V4L2_FIELD_NONE,
+ .width = 640,
+ .height = 480,
+ },
+ .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
+ SOCAM_DATA_ACTIVE_HIGH,
+ .set_capture = camera_set_capture,
+};
+
+static struct soc_camera_link camera_link = {
+ .bus_id = 0,
+ .add_device = mackerel_camera_add,
+ .del_device = mackerel_camera_del,
+ .module_name = "soc_camera_platform",
+ .priv = &camera_info,
+};
+
+static void dummy_release(struct device *dev)
+{
+}
+
+static struct platform_device camera_device = {
+ .name = "soc_camera_platform",
+ .dev = {
+ .platform_data = &camera_info,
+ .release = dummy_release,
+ },
+};
+
+static int mackerel_camera_add(struct soc_camera_link *icl,
+ struct device *dev)
+{
+ if (icl != &camera_link)
+ return -ENODEV;
+
+ camera_info.dev = dev;
+
+ return platform_device_register(&camera_device);
+}
+
+static void mackerel_camera_del(struct soc_camera_link *icl)
+{
+ if (icl != &camera_link)
+ return;
+
+ platform_device_unregister(&camera_device);
+ memset(&camera_device.dev.kobj, 0,
+ sizeof(camera_device.dev.kobj));
+}
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x880),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(ceu_resources),
+ .resource = ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+};
+
+static struct platform_device mackerel_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &camera_link,
+ },
+};
+
+static struct platform_device *mackerel_devices[] __initdata = {
+ &nor_flash_device,
+ &smc911x_device,
+ &lcdc_device,
+ &usb1_host_device,
+ &leds_device,
+ &fsi_device,
+ &fsi_ak4643_device,
+ &sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
+ &sdhi1_device,
+#endif
+ &sdhi2_device,
+ &sh_mmcif_device,
+ &ceu_device,
+ &mackerel_camera,
+ &hdmi_lcdc_device,
+ &hdmi_device,
+};
+
+/* Keypad Initialization */
+#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
+{ \
+ .type = ev_type, \
+ .code = ev_code, \
+ .active_low = act_low, \
+}
+
+#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
+
+static struct tca6416_button mackerel_gpio_keys[] = {
+ KEYPAD_BUTTON_LOW(KEY_HOME),
+ KEYPAD_BUTTON_LOW(KEY_MENU),
+ KEYPAD_BUTTON_LOW(KEY_BACK),
+ KEYPAD_BUTTON_LOW(KEY_POWER),
+};
+
+static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
+ .buttons = mackerel_gpio_keys,
+ .nbuttons = ARRAY_SIZE(mackerel_gpio_keys),
+ .rep = 1,
+ .use_polling = 0,
+ .pinmask = 0x000F,
+};
+
+/* I2C */
+#define IRQ9 evt2irq(0x0320)
+
+static struct i2c_board_info i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("ak4643", 0x13),
+ },
+ /* Keypad */
+ {
+ I2C_BOARD_INFO("tca6408-keys", 0x20),
+ .platform_data = &mackerel_tca6416_keys_info,
+ .irq = IRQ9,
+ },
+};
+
+#define IRQ21 evt2irq(0x32a0)
+
+static struct i2c_board_info i2c1_devices[] = {
+ /* Accelerometer */
+ {
+ I2C_BOARD_INFO("adxl34x", 0x53),
+ .irq = IRQ21,
+ },
+};
+
+static struct map_desc mackerel_io_desc[] __initdata = {
+ /* create a 1:1 entity map for 0xe6xxxxxx
+ * used by CPGA, INTC and PFC.
+ */
+ {
+ .virtual = 0xe6000000,
+ .pfn = __phys_to_pfn(0xe6000000),
+ .length = 256 << 20,
+ .type = MT_DEVICE_NONSHARED
+ },
+};
+
+static void __init mackerel_map_io(void)
+{
+ iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+
+ /* setup early devices and console here as well */
+ sh7372_add_early_devices();
+ shmobile_setup_console();
+}
+
+#define GPIO_PORT9CR 0xE6051009
+#define GPIO_PORT10CR 0xE605100A
+#define SRCR4 0xe61580bc
+#define USCCR1 0xE6058144
+static void __init mackerel_init(void)
+{
+ u32 srcr4;
+ struct clk *clk;
+
+ sh7372_pinmux_init();
+
+ /* enable SCIFA0 */
+ gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+ /* enable SMSC911X */
+ gpio_request(GPIO_FN_CS5A, NULL);
+ gpio_request(GPIO_FN_IRQ6_39, NULL);
+
+ /* LCDC */
+ gpio_request(GPIO_FN_LCDD23, NULL);
+ gpio_request(GPIO_FN_LCDD22, NULL);
+ gpio_request(GPIO_FN_LCDD21, NULL);
+ gpio_request(GPIO_FN_LCDD20, NULL);
+ gpio_request(GPIO_FN_LCDD19, NULL);
+ gpio_request(GPIO_FN_LCDD18, NULL);
+ gpio_request(GPIO_FN_LCDD17, NULL);
+ gpio_request(GPIO_FN_LCDD16, NULL);
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD9, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDD0, NULL);
+ gpio_request(GPIO_FN_LCDDISP, NULL);
+ gpio_request(GPIO_FN_LCDDCK, NULL);
+
+ gpio_request(GPIO_PORT31, NULL); /* backlight */
+ gpio_direction_output(GPIO_PORT31, 1);
+
+ gpio_request(GPIO_PORT151, NULL); /* LCDDON */
+ gpio_direction_output(GPIO_PORT151, 1);
+
+ /* USB enable */
+ gpio_request(GPIO_FN_VBUS0_1, NULL);
+ gpio_request(GPIO_FN_IDIN_1_18, NULL);
+ gpio_request(GPIO_FN_PWEN_1_115, NULL);
+ gpio_request(GPIO_FN_OVCN_1_114, NULL);
+ gpio_request(GPIO_FN_EXTLP_1, NULL);
+ gpio_request(GPIO_FN_OVCN2_1, NULL);
+
+ /* setup USB phy */
+ __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */
+
+ /* enable FSI2 port A (ak4643) */
+ gpio_request(GPIO_FN_FSIAIBT, NULL);
+ gpio_request(GPIO_FN_FSIAILR, NULL);
+ gpio_request(GPIO_FN_FSIAISLD, NULL);
+ gpio_request(GPIO_FN_FSIAOSLD, NULL);
+ gpio_request(GPIO_PORT161, NULL);
+ gpio_direction_output(GPIO_PORT161, 0); /* slave */
+
+ gpio_request(GPIO_PORT9, NULL);
+ gpio_request(GPIO_PORT10, NULL);
+ gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
+ gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+
+ intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
+
+ /* setup FSI2 port B (HDMI) */
+ gpio_request(GPIO_FN_FSIBCK, NULL);
+ __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
+ /* set SPU2 clock to 119.6 MHz */
+ clk = clk_get(NULL, "spu_clk");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, clk_round_rate(clk, 119600000));
+ clk_put(clk);
+ }
+
+ /* enable Keypad */
+ gpio_request(GPIO_FN_IRQ9_42, NULL);
+ set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
+
+ /* enable Accelerometer */
+ gpio_request(GPIO_FN_IRQ21, NULL);
+ set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
+
+ /* enable SDHI0 */
+ gpio_request(GPIO_FN_SDHICD0, NULL);
+ gpio_request(GPIO_FN_SDHIWP0, NULL);
+ gpio_request(GPIO_FN_SDHICMD0, NULL);
+ gpio_request(GPIO_FN_SDHICLK0, NULL);
+ gpio_request(GPIO_FN_SDHID0_3, NULL);
+ gpio_request(GPIO_FN_SDHID0_2, NULL);
+ gpio_request(GPIO_FN_SDHID0_1, NULL);
+ gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+#if !defined(CONFIG_MMC_SH_MMCIF)
+ /* enable SDHI1 */
+ gpio_request(GPIO_FN_SDHICMD1, NULL);
+ gpio_request(GPIO_FN_SDHICLK1, NULL);
+ gpio_request(GPIO_FN_SDHID1_3, NULL);
+ gpio_request(GPIO_FN_SDHID1_2, NULL);
+ gpio_request(GPIO_FN_SDHID1_1, NULL);
+ gpio_request(GPIO_FN_SDHID1_0, NULL);
+#endif
+ /* card detect pin for MMC slot (CN7) */
+ gpio_request(GPIO_PORT41, NULL);
+ gpio_direction_input(GPIO_PORT41);
+
+ /* enable SDHI2 */
+ gpio_request(GPIO_FN_SDHICMD2, NULL);
+ gpio_request(GPIO_FN_SDHICLK2, NULL);
+ gpio_request(GPIO_FN_SDHID2_3, NULL);
+ gpio_request(GPIO_FN_SDHID2_2, NULL);
+ gpio_request(GPIO_FN_SDHID2_1, NULL);
+ gpio_request(GPIO_FN_SDHID2_0, NULL);
+
+ /* MMCIF */
+ gpio_request(GPIO_FN_MMCD0_0, NULL);
+ gpio_request(GPIO_FN_MMCD0_1, NULL);
+ gpio_request(GPIO_FN_MMCD0_2, NULL);
+ gpio_request(GPIO_FN_MMCD0_3, NULL);
+ gpio_request(GPIO_FN_MMCD0_4, NULL);
+ gpio_request(GPIO_FN_MMCD0_5, NULL);
+ gpio_request(GPIO_FN_MMCD0_6, NULL);
+ gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCCMD0, NULL);
+ gpio_request(GPIO_FN_MMCCLK0, NULL);
+
+ /* enable GPS module (GT-720F) */
+ gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+ gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+
+ /* CEU */
+ gpio_request(GPIO_FN_VIO_CLK, NULL);
+ gpio_request(GPIO_FN_VIO_VD, NULL);
+ gpio_request(GPIO_FN_VIO_HD, NULL);
+ gpio_request(GPIO_FN_VIO_FIELD, NULL);
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+ gpio_request(GPIO_FN_VIO_D7, NULL);
+ gpio_request(GPIO_FN_VIO_D6, NULL);
+ gpio_request(GPIO_FN_VIO_D5, NULL);
+ gpio_request(GPIO_FN_VIO_D4, NULL);
+ gpio_request(GPIO_FN_VIO_D3, NULL);
+ gpio_request(GPIO_FN_VIO_D2, NULL);
+ gpio_request(GPIO_FN_VIO_D1, NULL);
+ gpio_request(GPIO_FN_VIO_D0, NULL);
+
+ /* HDMI */
+ gpio_request(GPIO_FN_HDMI_HPD, NULL);
+ gpio_request(GPIO_FN_HDMI_CEC, NULL);
+
+ /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
+ srcr4 = __raw_readl(SRCR4);
+ __raw_writel(srcr4 | (1 << 13), SRCR4);
+ udelay(50);
+ __raw_writel(srcr4 & ~(1 << 13), SRCR4);
+
+ i2c_register_board_info(0, i2c0_devices,
+ ARRAY_SIZE(i2c0_devices));
+ i2c_register_board_info(1, i2c1_devices,
+ ARRAY_SIZE(i2c1_devices));
+
+ sh7372_add_standard_devices();
+
+ platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+}
+
+static void __init mackerel_timer_init(void)
+{
+ sh7372_clock_init();
+ shmobile_timer.init();
+
+ /* External clock source */
+ clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+}
+
+static struct sys_timer mackerel_timer = {
+ .init = mackerel_timer_init,
+};
+
+MACHINE_START(MACKEREL, "mackerel")
+ .map_io = mackerel_map_io,
+ .init_irq = sh7372_init_irq,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = mackerel_init,
+ .timer = &mackerel_timer,
+MACHINE_END