1 files changed, 2 insertions, 47 deletions

diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 07dba888f450..517701aae3ca 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 
 #include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/wl12xx.h>
@@ -52,6 +51,7 @@
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
+#include "common-board-devices.h"
 
 #define PANDORA_WIFI_IRQ_GPIO		21
 #define PANDORA_WIFI_NRESET_GPIO	23
@@ -570,53 +570,8 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3pandora_ads7846_init(void)
-{
-	int gpio = OMAP3_PANDORA_TS_GPIO;
-	int ret;
-
-	ret = gpio_request(gpio, "ads7846_pen_down");
-	if (ret < 0) {
-		printk(KERN_ERR "Failed to request GPIO %d for "
-				"ads7846 pen down IRQ\n", gpio);
-		return;
-	}
-
-	gpio_direction_input(gpio);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_PANDORA_TS_GPIO);
-}
-
-static struct ads7846_platform_data ads7846_config = {
-	.x_max			= 0x0fff,
-	.y_max			= 0x0fff,
-	.x_plate_ohms		= 180,
-	.pressure_max		= 255,
-	.debounce_max		= 10,
-	.debounce_tol		= 3,
-	.debounce_rep		= 1,
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
-	.turbo_mode	= 0,
-	.single_channel	= 1,	/* 0: slave, 1: master */
-};
-
 static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	{
-		.modalias		= "ads7846",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 1500000,
-		.controller_data	= &ads7846_mcspi_config,
-		.irq			= OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
-		.platform_data		= &ads7846_config,
-	}, {
 		.modalias		= "tpo_td043mtea1_panel_spi",
 		.bus_num		= 1,
 		.chip_select		= 1,
@@ -705,7 +660,7 @@ static void __init omap3pandora_init(void)
 	omap_serial_init();
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
-	omap3pandora_ads7846_init();
+	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
 	usb_musb_init(&musb_board_data);
 	gpmc_nand_init(&pandora_nand_data);