summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mvebu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-mvebu')
-rw-r--r--arch/arm/mach-mvebu/Makefile2
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.h6
-rw-r--r--arch/arm/mach-mvebu/board-v7.c122
-rw-r--r--arch/arm/mach-mvebu/coherency.c221
-rw-r--r--arch/arm/mach-mvebu/coherency_ll.S21
-rw-r--r--arch/arm/mach-mvebu/common.h2
-rw-r--r--arch/arm/mach-mvebu/cpu-reset.c1
-rw-r--r--arch/arm/mach-mvebu/headsmp-a9.S1
-rw-r--r--arch/arm/mach-mvebu/platsmp-a9.c53
-rw-r--r--arch/arm/mach-mvebu/platsmp.c33
-rw-r--r--arch/arm/mach-mvebu/pm-board.c141
-rw-r--r--arch/arm/mach-mvebu/pm.c218
-rw-r--r--arch/arm/mach-mvebu/pmsu.c11
-rw-r--r--arch/arm/mach-mvebu/pmsu.h3
-rw-r--r--arch/arm/mach-mvebu/pmsu_ll.S28
15 files changed, 575 insertions, 288 deletions
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index e24136b42765..b4f01497ce0b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -7,7 +7,7 @@ CFLAGS_pmsu.o := -march=armv7-a
obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o
ifeq ($(CONFIG_MACH_MVEBU_V7),y)
-obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
+obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o pm.o pm-board.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
endif
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 84cd90d9b860..c55bbf81de0e 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -16,14 +16,8 @@
#define __MACH_ARMADA_370_XP_H
#ifdef CONFIG_SMP
-#include <linux/cpumask.h>
-
-#define ARMADA_XP_MAX_CPUS 4
-
void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif
-int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
-
#endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index d0d39f150fab..89a139ed7d5b 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -16,10 +16,12 @@
#include <linux/init.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
+#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
#include <linux/mbus.h>
#include <linux/signal.h>
#include <linux/slab.h>
@@ -57,6 +59,54 @@ void __iomem *mvebu_get_scu_base(void)
}
/*
+ * When returning from suspend, the platform goes through the
+ * bootloader, which executes its DDR3 training code. This code has
+ * the unfortunate idea of using the first 10 KB of each DRAM bank to
+ * exercise the RAM and calculate the optimal timings. Therefore, this
+ * area of RAM is overwritten, and shouldn't be used by the kernel if
+ * suspend/resume is supported.
+ */
+
+#ifdef CONFIG_SUSPEND
+#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K)
+static int __init mvebu_scan_mem(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ const __be32 *reg, *endp;
+ int l;
+
+ if (type == NULL || strcmp(type, "memory"))
+ return 0;
+
+ reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(__be32));
+ while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+ u64 base, size;
+
+ base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+ size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+ memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
+ }
+
+ return 0;
+}
+
+static void __init mvebu_memblock_reserve(void)
+{
+ of_scan_flat_dt(mvebu_scan_mem, NULL);
+}
+#else
+static void __init mvebu_memblock_reserve(void) {}
+#endif
+
+/*
* Early versions of Armada 375 SoC have a bug where the BootROM
* leaves an external data abort pending. The kernel is hit by this
* data abort as soon as it enters userspace, because it unmasks the
@@ -124,76 +174,12 @@ static void __init i2c_quirk(void)
return;
}
-#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc
-
-static void __init thermal_quirk(void)
-{
- struct device_node *np;
- u32 dev, rev;
- int res;
-
- /*
- * The early SoC Z1 revision needs a quirk to be applied in order
- * for the thermal controller to work properly. This quirk breaks
- * the thermal support if applied on a SoC that doesn't need it,
- * so we enforce the SoC revision to be known.
- */
- res = mvebu_get_soc_id(&dev, &rev);
- if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV))
- return;
-
- for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
- struct property *prop;
- __be32 newval, *newprop, *oldprop;
- int len;
-
- /*
- * The register offset is at a wrong location. This quirk
- * creates a new reg property as a clone of the previous
- * one and corrects the offset.
- */
- oldprop = (__be32 *)of_get_property(np, "reg", &len);
- if (!oldprop)
- continue;
-
- /* Create a duplicate of the 'reg' property */
- prop = kzalloc(sizeof(*prop), GFP_KERNEL);
- prop->length = len;
- prop->name = kstrdup("reg", GFP_KERNEL);
- prop->value = kzalloc(len, GFP_KERNEL);
- memcpy(prop->value, oldprop, len);
-
- /* Fixup the register offset of the second entry */
- oldprop += 2;
- newprop = (__be32 *)prop->value + 2;
- newval = cpu_to_be32(be32_to_cpu(*oldprop) -
- A375_Z1_THERMAL_FIXUP_OFFSET);
- *newprop = newval;
- of_update_property(np, prop);
-
- /*
- * The thermal controller needs some quirk too, so let's change
- * the compatible string to reflect this and allow the driver
- * the take the necessary action.
- */
- prop = kzalloc(sizeof(*prop), GFP_KERNEL);
- prop->name = kstrdup("compatible", GFP_KERNEL);
- prop->length = sizeof("marvell,armada375-z1-thermal");
- prop->value = kstrdup("marvell,armada375-z1-thermal",
- GFP_KERNEL);
- of_update_property(np, prop);
- }
- return;
-}
-
static void __init mvebu_dt_init(void)
{
if (of_machine_is_compatible("marvell,armadaxp"))
i2c_quirk();
- if (of_machine_is_compatible("marvell,a375-db")) {
+ if (of_machine_is_compatible("marvell,a375-db"))
external_abort_quirk();
- thermal_quirk();
- }
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -206,10 +192,16 @@ static const char * const armada_370_xp_dt_compat[] = {
DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
+/*
+ * The following field (.smp) is still needed to ensure backward
+ * compatibility with old Device Trees that were not specifying the
+ * cpus enable-method property.
+ */
.smp = smp_ops(armada_xp_smp_ops),
.init_machine = mvebu_dt_init,
.init_irq = mvebu_init_irq,
.restart = mvebu_restart,
+ .reserve = mvebu_memblock_reserve,
.dt_compat = armada_370_xp_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 044b51185fcc..3585cb394e9b 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -1,5 +1,6 @@
/*
- * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ * Coherency fabric (Aurora) support for Armada 370, 375, 38x and XP
+ * platforms.
*
* Copyright (C) 2012 Marvell
*
@@ -11,7 +12,7 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
- * The Armada 370 and Armada XP SOCs have a coherency fabric which is
+ * The Armada 370, 375, 38x and XP SOCs have a coherency fabric which is
* responsible for ensuring hardware coherency between all CPUs and between
* CPUs and I/O masters. This file initializes the coherency fabric and
* supplies basic routines for configuring and controlling hardware coherency
@@ -28,12 +29,10 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mbus.h>
-#include <linux/clk.h>
#include <linux/pci.h>
#include <asm/smp_plat.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
-#include "armada-370-xp.h"
#include "coherency.h"
#include "mvebu-soc-id.h"
@@ -42,8 +41,6 @@ void __iomem *coherency_base;
static void __iomem *coherency_cpu_base;
/* Coherency fabric registers */
-#define COHERENCY_FABRIC_CFG_OFFSET 0x4
-
#define IO_SYNC_BARRIER_CTL_OFFSET 0x0
enum {
@@ -79,157 +76,8 @@ int set_cpu_coherent(void)
return ll_enable_coherency();
}
-/*
- * The below code implements the I/O coherency workaround on Armada
- * 375. This workaround consists in using the two channels of the
- * first XOR engine to trigger a XOR transaction that serves as the
- * I/O coherency barrier.
- */
-
-static void __iomem *xor_base, *xor_high_base;
-static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS];
-static void *coherency_wa_buf[CONFIG_NR_CPUS];
-static bool coherency_wa_enabled;
-
-#define XOR_CONFIG(chan) (0x10 + (chan * 4))
-#define XOR_ACTIVATION(chan) (0x20 + (chan * 4))
-#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2))
-#define WINDOW_BASE(w) (0x250 + ((w) << 2))
-#define WINDOW_SIZE(w) (0x270 + ((w) << 2))
-#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2))
-#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2))
-#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4))
-#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4))
-#define XOR_INIT_VALUE_LOW 0x2E0
-#define XOR_INIT_VALUE_HIGH 0x2E4
-
-static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void)
-{
- int idx = smp_processor_id();
-
- /* Write '1' to the first word of the buffer */
- writel(0x1, coherency_wa_buf[idx]);
-
- /* Wait until the engine is idle */
- while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3)
- ;
-
- dmb();
-
- /* Trigger channel */
- writel(0x1, xor_base + XOR_ACTIVATION(idx));
-
- /* Poll the data until it is cleared by the XOR transaction */
- while (readl(coherency_wa_buf[idx]))
- ;
-}
-
-static void __init armada_375_coherency_init_wa(void)
-{
- const struct mbus_dram_target_info *dram;
- struct device_node *xor_node;
- struct property *xor_status;
- struct clk *xor_clk;
- u32 win_enable = 0;
- int i;
-
- pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n");
-
- /*
- * Since the workaround uses one XOR engine, we grab a
- * reference to its Device Tree node first.
- */
- xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor");
- BUG_ON(!xor_node);
-
- /*
- * Then we mark it as disabled so that the real XOR driver
- * will not use it.
- */
- xor_status = kzalloc(sizeof(struct property), GFP_KERNEL);
- BUG_ON(!xor_status);
-
- xor_status->value = kstrdup("disabled", GFP_KERNEL);
- BUG_ON(!xor_status->value);
-
- xor_status->length = 8;
- xor_status->name = kstrdup("status", GFP_KERNEL);
- BUG_ON(!xor_status->name);
-
- of_update_property(xor_node, xor_status);
-
- /*
- * And we remap the registers, get the clock, and do the
- * initial configuration of the XOR engine.
- */
- xor_base = of_iomap(xor_node, 0);
- xor_high_base = of_iomap(xor_node, 1);
-
- xor_clk = of_clk_get_by_name(xor_node, NULL);
- BUG_ON(!xor_clk);
-
- clk_prepare_enable(xor_clk);
-
- dram = mv_mbus_dram_info();
-
- for (i = 0; i < 8; i++) {
- writel(0, xor_base + WINDOW_BASE(i));
- writel(0, xor_base + WINDOW_SIZE(i));
- if (i < 4)
- writel(0, xor_base + WINDOW_REMAP_HIGH(i));
- }
-
- for (i = 0; i < dram->num_cs; i++) {
- const struct mbus_dram_window *cs = dram->cs + i;
- writel((cs->base & 0xffff0000) |
- (cs->mbus_attr << 8) |
- dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i));
- writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i));
-
- win_enable |= (1 << i);
- win_enable |= 3 << (16 + (2 * i));
- }
-
- writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0));
- writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1));
- writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0));
- writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1));
-
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
- coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL);
- BUG_ON(!coherency_wa_buf[i]);
-
- /*
- * We can't use the DMA mapping API, since we don't
- * have a valid 'struct device' pointer
- */
- coherency_wa_buf_phys[i] =
- virt_to_phys(coherency_wa_buf[i]);
- BUG_ON(!coherency_wa_buf_phys[i]);
-
- /*
- * Configure the XOR engine for memset operation, with
- * a 128 bytes block size
- */
- writel(0x444, xor_base + XOR_CONFIG(i));
- writel(128, xor_base + XOR_BLOCK_SIZE(i));
- writel(coherency_wa_buf_phys[i],
- xor_base + XOR_DEST_POINTER(i));
- }
-
- writel(0x0, xor_base + XOR_INIT_VALUE_LOW);
- writel(0x0, xor_base + XOR_INIT_VALUE_HIGH);
-
- coherency_wa_enabled = true;
-}
-
static inline void mvebu_hwcc_sync_io_barrier(void)
{
- if (coherency_wa_enabled) {
- mvebu_hwcc_armada375_sync_io_barrier_wa();
- return;
- }
-
writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
}
@@ -361,25 +209,41 @@ static int coherency_type(void)
{
struct device_node *np;
const struct of_device_id *match;
+ int type;
- np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
- if (np) {
- int type = (int) match->data;
+ /*
+ * The coherency fabric is needed:
+ * - For coherency between processors on Armada XP, so only
+ * when SMP is enabled.
+ * - For coherency between the processor and I/O devices, but
+ * this coherency requires many pre-requisites (write
+ * allocate cache policy, shareable pages, SMP bit set) that
+ * are only meant in SMP situations.
+ *
+ * Note that this means that on Armada 370, there is currently
+ * no way to use hardware I/O coherency, because even when
+ * CONFIG_SMP is enabled, is_smp() returns false due to the
+ * Armada 370 being a single-core processor. To lift this
+ * limitation, we would have to find a way to make the cache
+ * policy set to write-allocate (on all Armada SoCs), and to
+ * set the shareable attribute in page tables (on all Armada
+ * SoCs except the Armada 370). Unfortunately, such decisions
+ * are taken very early in the kernel boot process, at a point
+ * where we don't know yet on which SoC we are running.
- /* Armada 370/XP coherency works in both UP and SMP */
- if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
- return type;
+ */
+ if (!is_smp())
+ return COHERENCY_FABRIC_TYPE_NONE;
- /* Armada 375 coherency works only on SMP */
- else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp())
- return type;
+ np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
+ if (!np)
+ return COHERENCY_FABRIC_TYPE_NONE;
- /* Armada 380 coherency works only on SMP */
- else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp())
- return type;
- }
+ type = (int) match->data;
- return COHERENCY_FABRIC_TYPE_NONE;
+ of_node_put(np);
+
+ return type;
}
int coherency_available(void)
@@ -407,22 +271,9 @@ int __init coherency_init(void)
static int __init coherency_late_init(void)
{
- int type = coherency_type();
-
- if (type == COHERENCY_FABRIC_TYPE_NONE)
- return 0;
-
- if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) {
- u32 dev, rev;
-
- if (mvebu_get_soc_id(&dev, &rev) == 0 &&
- rev == ARMADA_375_Z1_REV)
- armada_375_coherency_init_wa();
- }
-
- bus_register_notifier(&platform_bus_type,
- &mvebu_hwcc_nb);
-
+ if (coherency_available())
+ bus_register_notifier(&platform_bus_type,
+ &mvebu_hwcc_nb);
return 0;
}
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index f5d881b5d0f7..8b2fbc8b6bc6 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -24,7 +24,10 @@
#include <asm/cp15.h>
.text
-/* Returns the coherency base address in r1 (r0 is untouched) */
+/*
+ * Returns the coherency base address in r1 (r0 is untouched), or 0 if
+ * the coherency fabric is not enabled.
+ */
ENTRY(ll_get_coherency_base)
mrc p15, 0, r1, c1, c0, 0
tst r1, #CR_M @ Check MMU bit enabled
@@ -32,8 +35,13 @@ ENTRY(ll_get_coherency_base)
/*
* MMU is disabled, use the physical address of the coherency
- * base address.
+ * base address. However, if the coherency fabric isn't mapped
+ * (i.e its virtual address is zero), it means coherency is
+ * not enabled, so we return 0.
*/
+ ldr r1, =coherency_base
+ cmp r1, #0
+ beq 2f
adr r1, 3f
ldr r3, [r1]
ldr r1, [r1, r3]
@@ -85,6 +93,9 @@ ENTRY(ll_add_cpu_to_smp_group)
*/
mov r0, lr
bl ll_get_coherency_base
+ /* Bail out if the coherency is not enabled */
+ cmp r1, #0
+ reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
@@ -107,6 +118,9 @@ ENTRY(ll_enable_coherency)
*/
mov r0, lr
bl ll_get_coherency_base
+ /* Bail out if the coherency is not enabled */
+ cmp r1, #0
+ reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
@@ -131,6 +145,9 @@ ENTRY(ll_disable_coherency)
*/
mov r0, lr
bl ll_get_coherency_base
+ /* Bail out if the coherency is not enabled */
+ cmp r1, #0
+ reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 3ccb40c3bf94..3e0aca1f288a 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -25,4 +25,6 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev);
void __iomem *mvebu_get_scu_base(void);
+int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd));
+
#endif
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
index 60fb53787004..4a2cadd6b48e 100644
--- a/arch/arm/mach-mvebu/cpu-reset.c
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -15,7 +15,6 @@
#include <linux/of_address.h>
#include <linux/io.h>
#include <linux/resource.h>
-#include "armada-370-xp.h"
static void __iomem *cpu_reset_base;
static size_t cpu_reset_size;
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
index be51c998c0cd..08d5ed46b996 100644
--- a/arch/arm/mach-mvebu/headsmp-a9.S
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -22,5 +22,6 @@
ENTRY(mvebu_cortex_a9_secondary_startup)
ARM_BE8(setend be)
bl v7_invalidate_l1
+ bl armada_38x_scu_power_up
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 47a71a924b96..2ec1a42b4321 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -43,21 +43,70 @@ static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu,
else
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cortex_a9_secondary_startup);
smp_wmb();
+
+ /*
+ * Doing this before deasserting the CPUs is needed to wake up CPUs
+ * in the offline state after using CPU hotplug.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
ret = mvebu_cpu_reset_deassert(hw_cpu);
if (ret) {
pr_err("Could not start the secondary CPU: %d\n", ret);
return ret;
}
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
+/*
+ * When a CPU is brought back online, either through CPU hotplug, or
+ * because of the boot of a kexec'ed kernel, the PMSU configuration
+ * for this CPU might be in the deep idle state, preventing this CPU
+ * from receiving interrupts. Here, we therefore take out the current
+ * CPU from this state, which was entered by armada_38x_cpu_die()
+ * below.
+ */
+static void armada_38x_secondary_init(unsigned int cpu)
+{
+ mvebu_v7_pmsu_idle_exit();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void armada_38x_cpu_die(unsigned int cpu)
+{
+ /*
+ * CPU hotplug is implemented by putting offline CPUs into the
+ * deep idle sleep state.
+ */
+ armada_38x_do_cpu_suspend(true);
+}
+
+/*
+ * We need a dummy function, so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline can enter the deep idle state
+ * by themselves, without any help from a still alive CPU.
+ */
+static int armada_38x_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+#endif
static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
.smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
};
+static struct smp_operations armada_38x_smp_ops __initdata = {
+ .smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
+ .smp_secondary_init = armada_38x_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = armada_38x_cpu_die,
+ .cpu_kill = armada_38x_cpu_kill,
+#endif
+};
+
CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
&mvebu_cortex_a9_smp_ops);
CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
- &mvebu_cortex_a9_smp_ops);
+ &armada_38x_smp_ops);
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 895dc373c8a1..58cc8c1575eb 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -30,10 +30,12 @@
#include "pmsu.h"
#include "coherency.h"
+#define ARMADA_XP_MAX_CPUS 4
+
#define AXP_BOOTROM_BASE 0xfff00000
#define AXP_BOOTROM_SIZE 0x100000
-static struct clk *__init get_cpu_clk(int cpu)
+static struct clk *get_cpu_clk(int cpu)
{
struct clk *cpu_clk;
struct device_node *np = of_get_cpu_node(cpu, NULL);
@@ -46,29 +48,28 @@ static struct clk *__init get_cpu_clk(int cpu)
return cpu_clk;
}
-static void __init set_secondary_cpus_clock(void)
+static void set_secondary_cpu_clock(unsigned int cpu)
{
- int thiscpu, cpu;
+ int thiscpu;
unsigned long rate;
struct clk *cpu_clk;
- thiscpu = smp_processor_id();
+ thiscpu = get_cpu();
+
cpu_clk = get_cpu_clk(thiscpu);
if (!cpu_clk)
- return;
+ goto out;
clk_prepare_enable(cpu_clk);
rate = clk_get_rate(cpu_clk);
- /* set all the other CPU clk to the same rate than the boot CPU */
- for_each_possible_cpu(cpu) {
- if (cpu == thiscpu)
- continue;
- cpu_clk = get_cpu_clk(cpu);
- if (!cpu_clk)
- return;
- clk_set_rate(cpu_clk, rate);
- clk_prepare_enable(cpu_clk);
- }
+ cpu_clk = get_cpu_clk(cpu);
+ if (!cpu_clk)
+ goto out;
+ clk_set_rate(cpu_clk, rate);
+ clk_prepare_enable(cpu_clk);
+
+out:
+ put_cpu();
}
static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -78,6 +79,7 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
pr_info("Booting CPU %d\n", cpu);
hw_cpu = cpu_logical_map(cpu);
+ set_secondary_cpu_clock(hw_cpu);
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
/*
@@ -126,7 +128,6 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
struct resource res;
int err;
- set_secondary_cpus_clock();
flush_cache_all();
set_cpu_coherent();
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
new file mode 100644
index 000000000000..6dfd4ab97b2a
--- /dev/null
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -0,0 +1,141 @@
+/*
+ * Board-level suspend/resume support.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include "common.h"
+
+#define ARMADA_XP_GP_PIC_NR_GPIOS 3
+
+static void __iomem *gpio_ctrl;
+static int pic_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
+static int pic_raw_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
+
+static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
+{
+ u32 reg, ackcmd;
+ int i;
+
+ /* Put 001 as value on the GPIOs */
+ reg = readl(gpio_ctrl);
+ for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+ reg &= ~BIT(pic_raw_gpios[i]);
+ reg |= BIT(pic_raw_gpios[0]);
+ writel(reg, gpio_ctrl);
+
+ /* Prepare writing 111 to the GPIOs */
+ ackcmd = readl(gpio_ctrl);
+ for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+ ackcmd |= BIT(pic_raw_gpios[i]);
+
+ /*
+ * Wait a while, the PIC needs quite a bit of time between the
+ * two GPIO commands.
+ */
+ mdelay(3000);
+
+ asm volatile (
+ /* Align to a cache line */
+ ".balign 32\n\t"
+
+ /* Enter self refresh */
+ "str %[srcmd], [%[sdram_reg]]\n\t"
+
+ /*
+ * Wait 100 cycles for DDR to enter self refresh, by
+ * doing 50 times two instructions.
+ */
+ "mov r1, #50\n\t"
+ "1: subs r1, r1, #1\n\t"
+ "bne 1b\n\t"
+
+ /* Issue the command ACK */
+ "str %[ackcmd], [%[gpio_ctrl]]\n\t"
+
+ /* Trap the processor */
+ "b .\n\t"
+ : : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg),
+ [ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1");
+}
+
+static int mvebu_armada_xp_gp_pm_init(void)
+{
+ struct device_node *np;
+ struct device_node *gpio_ctrl_np;
+ int ret = 0, i;
+
+ if (!of_machine_is_compatible("marvell,axp-gp"))
+ return -ENODEV;
+
+ np = of_find_node_by_name(NULL, "pm_pic");
+ if (!np)
+ return -ENODEV;
+
+ for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++) {
+ char *name;
+ struct of_phandle_args args;
+
+ pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
+ if (pic_gpios[i] < 0) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
+ if (!name) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = gpio_request(pic_gpios[i], name);
+ if (ret < 0) {
+ kfree(name);
+ goto out;
+ }
+
+ ret = gpio_direction_output(pic_gpios[i], 0);
+ if (ret < 0) {
+ gpio_free(pic_gpios[i]);
+ kfree(name);
+ goto out;
+ }
+
+ ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
+ i, &args);
+ if (ret < 0) {
+ gpio_free(pic_gpios[i]);
+ kfree(name);
+ goto out;
+ }
+
+ gpio_ctrl_np = args.np;
+ pic_raw_gpios[i] = args.args[0];
+ }
+
+ gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
+ if (!gpio_ctrl)
+ return -ENOMEM;
+
+ mvebu_pm_init(mvebu_armada_xp_gp_pm_enter);
+
+out:
+ of_node_put(np);
+ return ret;
+}
+
+late_initcall(mvebu_armada_xp_gp_pm_init);
diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c
new file mode 100644
index 000000000000..6573a8f11f70
--- /dev/null
+++ b/arch/arm/mach-mvebu/pm.c
@@ -0,0 +1,218 @@
+/*
+ * Suspend/resume support. Currently supporting Armada XP only.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mbus.h>
+#include <linux/of_address.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/outercache.h>
+#include <asm/suspend.h>
+
+#include "coherency.h"
+#include "pmsu.h"
+
+#define SDRAM_CONFIG_OFFS 0x0
+#define SDRAM_CONFIG_SR_MODE_BIT BIT(24)
+#define SDRAM_OPERATION_OFFS 0x18
+#define SDRAM_OPERATION_SELF_REFRESH 0x7
+#define SDRAM_DLB_EVICTION_OFFS 0x30c
+#define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff
+
+static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
+static void __iomem *sdram_ctrl;
+
+static int mvebu_pm_powerdown(unsigned long data)
+{
+ u32 reg, srcmd;
+
+ flush_cache_all();
+ outer_flush_all();
+
+ /*
+ * Issue a Data Synchronization Barrier instruction to ensure
+ * that all state saving has been completed.
+ */
+ dsb();
+
+ /* Flush the DLB and wait ~7 usec */
+ reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+ reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
+ writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+
+ udelay(7);
+
+ /* Set DRAM in battery backup mode */
+ reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
+ reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
+ writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);
+
+ /* Prepare to go to self-refresh */
+
+ srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
+ srcmd &= ~0x1F;
+ srcmd |= SDRAM_OPERATION_SELF_REFRESH;
+
+ mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);
+
+ return 0;
+}
+
+#define BOOT_INFO_ADDR 0x3000
+#define BOOT_MAGIC_WORD 0xdeadb002
+#define BOOT_MAGIC_LIST_END 0xffffffff
+
+/*
+ * Those registers are accessed before switching the internal register
+ * base, which is why we hardcode the 0xd0000000 base address, the one
+ * used by the SoC out of reset.
+ */
+#define MBUS_WINDOW_12_CTRL 0xd00200b0
+#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080
+
+#define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x))
+#define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x))
+
+static phys_addr_t mvebu_internal_reg_base(void)
+{
+ struct device_node *np;
+ __be32 in_addr[2];
+
+ np = of_find_node_by_name(NULL, "internal-regs");
+ BUG_ON(!np);
+
+ /*
+ * Ask the DT what is the internal register address on this
+ * platform. In the mvebu-mbus DT binding, 0xf0010000
+ * corresponds to the internal register window.
+ */
+ in_addr[0] = cpu_to_be32(0xf0010000);
+ in_addr[1] = 0x0;
+
+ return of_translate_address(np, in_addr);
+}
+
+static void mvebu_pm_store_bootinfo(void)
+{
+ u32 *store_addr;
+ phys_addr_t resume_pc;
+
+ store_addr = phys_to_virt(BOOT_INFO_ADDR);
+ resume_pc = virt_to_phys(armada_370_xp_cpu_resume);
+
+ /*
+ * The bootloader expects the first two words to be a magic
+ * value (BOOT_MAGIC_WORD), followed by the address of the
+ * resume code to jump to. Then, it expects a sequence of
+ * (address, value) pairs, which can be used to restore the
+ * value of certain registers. This sequence must end with the
+ * BOOT_MAGIC_LIST_END magic value.
+ */
+
+ writel(BOOT_MAGIC_WORD, store_addr++);
+ writel(resume_pc, store_addr++);
+
+ /*
+ * Some platforms remap their internal register base address
+ * to 0xf1000000. However, out of reset, window 12 starts at
+ * 0xf0000000 and ends at 0xf7ffffff, which would overlap with
+ * the internal registers. Therefore, disable window 12.
+ */
+ writel(MBUS_WINDOW_12_CTRL, store_addr++);
+ writel(0x0, store_addr++);
+
+ /*
+ * Set the internal register base address to the value
+ * expected by Linux, as read from the Device Tree.
+ */
+ writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
+ writel(mvebu_internal_reg_base(), store_addr++);
+
+ /*
+ * Ask the mvebu-mbus driver to store the SDRAM window
+ * configuration, which has to be restored by the bootloader
+ * before re-entering the kernel on resume.
+ */
+ store_addr += mvebu_mbus_save_cpu_target(store_addr);
+
+ writel(BOOT_MAGIC_LIST_END, store_addr);
+}
+
+static int mvebu_pm_enter(suspend_state_t state)
+{
+ if (state != PM_SUSPEND_MEM)
+ return -EINVAL;
+
+ cpu_pm_enter();
+
+ mvebu_pm_store_bootinfo();
+ cpu_suspend(0, mvebu_pm_powerdown);
+
+ outer_resume();
+
+ mvebu_v7_pmsu_idle_exit();
+
+ set_cpu_coherent();
+
+ cpu_pm_exit();
+
+ return 0;
+}
+
+static const struct platform_suspend_ops mvebu_pm_ops = {
+ .enter = mvebu_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd))
+{
+ struct device_node *np;
+ struct resource res;
+
+ if (!of_machine_is_compatible("marvell,armadaxp"))
+ return -ENODEV;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-xp-sdram-controller");
+ if (!np)
+ return -ENODEV;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ if (!request_mem_region(res.start, resource_size(&res),
+ np->full_name)) {
+ of_node_put(np);
+ return -EBUSY;
+ }
+
+ sdram_ctrl = ioremap(res.start, resource_size(&res));
+ if (!sdram_ctrl) {
+ release_mem_region(res.start, resource_size(&res));
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ of_node_put(np);
+
+ mvebu_board_pm_enter = board_pm_enter;
+
+ suspend_set_ops(&mvebu_pm_ops);
+
+ return 0;
+}
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index bbd8664d1bac..d8ab605a44fa 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -20,6 +20,7 @@
#include <linux/clk.h>
#include <linux/cpu_pm.h>
+#include <linux/cpufreq-dt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -39,7 +40,6 @@
#include <asm/suspend.h>
#include <asm/tlbflush.h>
#include "common.h"
-#include "armada-370-xp.h"
#define PMSU_BASE_OFFSET 0x100
@@ -312,7 +312,7 @@ static int armada_370_xp_cpu_suspend(unsigned long deepidle)
return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
}
-static int armada_38x_do_cpu_suspend(unsigned long deepidle)
+int armada_38x_do_cpu_suspend(unsigned long deepidle)
{
unsigned long flags = 0;
@@ -572,6 +572,10 @@ int mvebu_pmsu_dfs_request(int cpu)
return 0;
}
+struct cpufreq_dt_platform_data cpufreq_dt_pd = {
+ .independent_clocks = true,
+};
+
static int __init armada_xp_pmsu_cpufreq_init(void)
{
struct device_node *np;
@@ -644,7 +648,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
}
}
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ platform_device_register_data(NULL, "cpufreq-dt", -1,
+ &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
return 0;
}
diff --git a/arch/arm/mach-mvebu/pmsu.h b/arch/arm/mach-mvebu/pmsu.h
index 6b58c1fe2b0d..ea79269c2702 100644
--- a/arch/arm/mach-mvebu/pmsu.h
+++ b/arch/arm/mach-mvebu/pmsu.h
@@ -17,5 +17,8 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
phys_addr_t resume_addr_reg);
void mvebu_v7_pmsu_idle_exit(void);
+void armada_370_xp_cpu_resume(void);
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
+int armada_38x_do_cpu_suspend(unsigned long deepidle);
#endif /* __MACH_370_XP_PMSU_H */
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
index a945756cfb45..88651221dbdd 100644
--- a/arch/arm/mach-mvebu/pmsu_ll.S
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -12,12 +12,32 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+
+ENTRY(armada_38x_scu_power_up)
+ mrc p15, 4, r1, c15, c0 @ get SCU base address
+ orr r1, r1, #0x8 @ SCU CPU Power Status Register
+ mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
+ and r0, r0, #15
+ add r1, r1, r0
+ mov r0, #0x0
+ strb r0, [r1] @ switch SCU power state to Normal mode
+ ret lr
+ENDPROC(armada_38x_scu_power_up)
+
/*
* This is the entry point through which CPUs exiting cpuidle deep
* idle state are going.
*/
ENTRY(armada_370_xp_cpu_resume)
ARM_BE8(setend be ) @ go BE8 if entered LE
+ /*
+ * Disable the MMU that might have been enabled in BootROM if
+ * this code is used in the resume path of a suspend/resume
+ * cycle.
+ */
+ mrc p15, 0, r1, c1, c0, 0
+ bic r1, #1
+ mcr p15, 0, r1, c1, c0, 0
bl ll_add_cpu_to_smp_group
bl ll_enable_coherency
b cpu_resume
@@ -27,13 +47,7 @@ ENTRY(armada_38x_cpu_resume)
/* do we need it for Armada 38x*/
ARM_BE8(setend be ) @ go BE8 if entered LE
bl v7_invalidate_l1
- mrc p15, 4, r1, c15, c0 @ get SCU base address
- orr r1, r1, #0x8 @ SCU CPU Power Status Register
- mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
- and r0, r0, #15
- add r1, r1, r0
- mov r0, #0x0
- strb r0, [r1] @ switch SCU power state to Normal mode
+ bl armada_38x_scu_power_up
b cpu_resume
ENDPROC(armada_38x_cpu_resume)