diff options
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r-- | arch/arm/mach-at91/pm.c | 46 | ||||
-rw-r--r-- | arch/arm/mach-at91/pm_suspend.S | 24 |
2 files changed, 54 insertions, 16 deletions
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8711d6824c1f..c8cc993ca8ca 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -146,7 +146,7 @@ static const struct wakeup_source_info ws_info[] = { static const struct of_device_id sama5d2_ws_ids[] = { { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] }, - { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,sama5d2-rtc", .data = &ws_info[1] }, { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] }, { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, @@ -157,24 +157,24 @@ static const struct of_device_id sama5d2_ws_ids[] = { }; static const struct of_device_id sam9x60_ws_ids[] = { - { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, + { .compatible = "microchip,sam9x60-rtc", .data = &ws_info[1] }, { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, { .compatible = "usb-ehci", .data = &ws_info[2] }, - { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, + { .compatible = "microchip,sam9x60-rtt", .data = &ws_info[4] }, { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] }, { /* sentinel */ } }; static const struct of_device_id sama7g5_ws_ids[] = { - { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] }, + { .compatible = "microchip,sama7g5-rtc", .data = &ws_info[1] }, { .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] }, { .compatible = "usb-ohci", .data = &ws_info[2] }, { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, { .compatible = "usb-ehci", .data = &ws_info[2] }, { .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] }, - { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] }, + { .compatible = "microchip,sama7g5-rtt", .data = &ws_info[4] }, { /* sentinel */ } }; @@ -350,10 +350,42 @@ extern u32 at91_pm_suspend_in_sram_sz; static int at91_suspend_finish(unsigned long val) { + unsigned char modified_gray_code[] = { + 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d, + 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b, + 0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13, + 0x10, 0x11, + }; + unsigned int tmp, index; int i; if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) { /* + * Bootloader will perform DDR recalibration and will try to + * restore the ZQ0SR0 with the value saved here. But the + * calibration is buggy and restoring some values from ZQ0SR0 + * is forbidden and risky thus we need to provide processed + * values for these (modified gray code values). + */ + tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0); + + /* Store pull-down output impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index]; + + /* Store pull-up output impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* Store pull-down on-die termination impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* Store pull-up on-die termination impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* * The 1st 8 words of memory might get corrupted in the process * of DDR PHY recalibration; it is saved here in securam and it * will be restored later, after recalibration, by bootloader @@ -841,10 +873,6 @@ static int __init at91_pm_backup_init(void) of_scan_flat_dt(at91_pm_backup_scan_memcs, &located); if (!located) goto securam_fail; - - /* DDR3PHY_ZQ0SR0 */ - soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy + - 0x188); } return 0; diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index fdb4f63ecde4..65cfcc19a936 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -172,9 +172,15 @@ sr_ena_2: /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ cmp r7, #AT91_PM_BACKUP beq sr_ena_3 - ldr tmp1, [r3, #DDR3PHY_PIR] - orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + + /* Disable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] sr_ena_3: /* Power down DDR PHY data receivers. */ @@ -221,10 +227,14 @@ sr_ena_3: bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 str tmp1, [r3, #DDR3PHY_DSGCR] - /* Take DDR PHY's DLL out of bypass mode. */ - ldr tmp1, [r3, #DDR3PHY_PIR] - bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + /* Enable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] /* Enable quasi-dynamic programming. */ mov tmp1, #0 |