summaryrefslogtreecommitdiff
path: root/Documentation/media/uapi/v4l/buffer.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/media/uapi/v4l/buffer.rst')
-rw-r--r--Documentation/media/uapi/v4l/buffer.rst982
1 files changed, 982 insertions, 0 deletions
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
new file mode 100644
index 000000000000..5deb4a46f992
--- /dev/null
+++ b/Documentation/media/uapi/v4l/buffer.rst
@@ -0,0 +1,982 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _buffer:
+
+*******
+Buffers
+*******
+
+A buffer contains data exchanged by application and driver using one of
+the Streaming I/O methods. In the multi-planar API, the data is held in
+planes, while the buffer structure acts as a container for the planes.
+Only pointers to buffers (planes) are exchanged, the data itself is not
+copied. These pointers, together with meta-information like timestamps
+or field parity, are stored in a struct :ref:`struct v4l2_buffer <v4l2-buffer>`,
+argument to the :ref:`VIDIOC_QUERYBUF`,
+:ref:`VIDIOC_QBUF` and
+:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. In the multi-planar API,
+some plane-specific members of struct :ref:`struct v4l2_buffer <v4l2-buffer>`,
+such as pointers and sizes for each plane, are stored in struct
+:ref:`struct v4l2_plane <v4l2-plane>` instead. In that case, struct
+:ref:`struct v4l2_buffer <v4l2-buffer>` contains an array of plane structures.
+
+Dequeued video buffers come with timestamps. The driver decides at which
+part of the frame and with which clock the timestamp is taken. Please
+see flags in the masks ``V4L2_BUF_FLAG_TIMESTAMP_MASK`` and
+``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` in :ref:`buffer-flags`. These flags
+are always valid and constant across all buffers during the whole video
+stream. Changes in these flags may take place as a side effect of
+:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` or
+:ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` however. The
+``V4L2_BUF_FLAG_TIMESTAMP_COPY`` timestamp type which is used by e.g. on
+mem-to-mem devices is an exception to the rule: the timestamp source
+flags are copied from the OUTPUT video buffer to the CAPTURE video
+buffer.
+
+
+.. _v4l2-buffer:
+
+struct v4l2_buffer
+==================
+
+.. flat-table:: struct v4l2_buffer
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 1 2
+
+
+ - .. row 1
+
+ - __u32
+
+ - ``index``
+
+ -
+ - Number of the buffer, set by the application except when calling
+ :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, then it is set by the
+ driver. This field can range from zero to the number of buffers
+ allocated with the :ref:`VIDIOC_REQBUFS` ioctl
+ (struct :ref:`v4l2_requestbuffers <v4l2-requestbuffers>`
+ ``count``), plus any buffers allocated with
+ :ref:`VIDIOC_CREATE_BUFS` minus one.
+
+ - .. row 2
+
+ - __u32
+
+ - ``type``
+
+ -
+ - Type of the buffer, same as struct
+ :ref:`v4l2_format <v4l2-format>` ``type`` or struct
+ :ref:`v4l2_requestbuffers <v4l2-requestbuffers>` ``type``, set
+ by the application. See :ref:`v4l2-buf-type`
+
+ - .. row 3
+
+ - __u32
+
+ - ``bytesused``
+
+ -
+ - The number of bytes occupied by the data in the buffer. It depends
+ on the negotiated data format and may change with each buffer for
+ compressed variable size data like JPEG images. Drivers must set
+ this field when ``type`` refers to a capture stream, applications
+ when it refers to an output stream. If the application sets this
+ to 0 for an output stream, then ``bytesused`` will be set to the
+ size of the buffer (see the ``length`` field of this struct) by
+ the driver. For multiplanar formats this field is ignored and the
+ ``planes`` pointer is used instead.
+
+ - .. row 4
+
+ - __u32
+
+ - ``flags``
+
+ -
+ - Flags set by the application or driver, see :ref:`buffer-flags`.
+
+ - .. row 5
+
+ - __u32
+
+ - ``field``
+
+ -
+ - Indicates the field order of the image in the buffer, see
+ :ref:`v4l2-field`. This field is not used when the buffer
+ contains VBI data. Drivers must set it when ``type`` refers to a
+ capture stream, applications when it refers to an output stream.
+
+ - .. row 6
+
+ - struct timeval
+
+ - ``timestamp``
+
+ -
+ - For capture streams this is time when the first data byte was
+ captured, as returned by the :c:func:`clock_gettime()` function
+ for the relevant clock id; see ``V4L2_BUF_FLAG_TIMESTAMP_*`` in
+ :ref:`buffer-flags`. For output streams the driver stores the
+ time at which the last data byte was actually sent out in the
+ ``timestamp`` field. This permits applications to monitor the
+ drift between the video and system clock. For output streams that
+ use ``V4L2_BUF_FLAG_TIMESTAMP_COPY`` the application has to fill
+ in the timestamp which will be copied by the driver to the capture
+ stream.
+
+ - .. row 7
+
+ - struct :ref:`v4l2_timecode <v4l2-timecode>`
+
+ - ``timecode``
+
+ -
+ - When ``type`` is ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` and the
+ ``V4L2_BUF_FLAG_TIMECODE`` flag is set in ``flags``, this
+ structure contains a frame timecode. In
+ :ref:`V4L2_FIELD_ALTERNATE <v4l2-field>` mode the top and
+ bottom field contain the same timecode. Timecodes are intended to
+ help video editing and are typically recorded on video tapes, but
+ also embedded in compressed formats like MPEG. This field is
+ independent of the ``timestamp`` and ``sequence`` fields.
+
+ - .. row 8
+
+ - __u32
+
+ - ``sequence``
+
+ -
+ - Set by the driver, counting the frames (not fields!) in sequence.
+ This field is set for both input and output devices.
+
+ - .. row 9
+
+ - :cspan:`3`
+
+ In :ref:`V4L2_FIELD_ALTERNATE <v4l2-field>` mode the top and
+ bottom field have the same sequence number. The count starts at
+ zero and includes dropped or repeated frames. A dropped frame was
+ received by an input device but could not be stored due to lack of
+ free buffer space. A repeated frame was displayed again by an
+ output device because the application did not pass new data in
+ time.
+
+ .. note:: This may count the frames received e.g. over USB, without
+ taking into account the frames dropped by the remote hardware due
+ to limited compression throughput or bus bandwidth. These devices
+ identify by not enumerating any video standards, see
+ :ref:`standard`.
+
+ - .. row 10
+
+ - __u32
+
+ - ``memory``
+
+ -
+ - This field must be set by applications and/or drivers in
+ accordance with the selected I/O method. See :ref:`v4l2-memory`
+
+ - .. row 11
+
+ - union
+
+ - ``m``
+
+ - .. row 12
+
+ -
+ - __u32
+
+ - ``offset``
+
+ - For the single-planar API and when ``memory`` is
+ ``V4L2_MEMORY_MMAP`` this is the offset of the buffer from the
+ start of the device memory. The value is returned by the driver
+ and apart of serving as parameter to the
+ :ref:`mmap() <func-mmap>` function not useful for applications.
+ See :ref:`mmap` for details
+
+ - .. row 13
+
+ -
+ - unsigned long
+
+ - ``userptr``
+
+ - For the single-planar API and when ``memory`` is
+ ``V4L2_MEMORY_USERPTR`` this is a pointer to the buffer (casted to
+ unsigned long type) in virtual memory, set by the application. See
+ :ref:`userp` for details.
+
+ - .. row 14
+
+ -
+ - struct v4l2_plane
+
+ - ``*planes``
+
+ - When using the multi-planar API, contains a userspace pointer to
+ an array of struct :ref:`v4l2_plane <v4l2-plane>`. The size of
+ the array should be put in the ``length`` field of this
+ :ref:`struct v4l2_buffer <v4l2-buffer>` structure.
+
+ - .. row 15
+
+ -
+ - int
+
+ - ``fd``
+
+ - For the single-plane API and when ``memory`` is
+ ``V4L2_MEMORY_DMABUF`` this is the file descriptor associated with
+ a DMABUF buffer.
+
+ - .. row 16
+
+ - __u32
+
+ - ``length``
+
+ -
+ - Size of the buffer (not the payload) in bytes for the
+ single-planar API. This is set by the driver based on the calls to
+ :ref:`VIDIOC_REQBUFS` and/or
+ :ref:`VIDIOC_CREATE_BUFS`. For the
+ multi-planar API the application sets this to the number of
+ elements in the ``planes`` array. The driver will fill in the
+ actual number of valid elements in that array.
+
+ - .. row 17
+
+ - __u32
+
+ - ``reserved2``
+
+ -
+ - A place holder for future extensions. Drivers and applications
+ must set this to 0.
+
+ - .. row 18
+
+ - __u32
+
+ - ``reserved``
+
+ -
+ - A place holder for future extensions. Drivers and applications
+ must set this to 0.
+
+
+
+.. _v4l2-plane:
+
+struct v4l2_plane
+=================
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 1 2
+
+
+ - .. row 1
+
+ - __u32
+
+ - ``bytesused``
+
+ -
+ - The number of bytes occupied by data in the plane (its payload).
+ Drivers must set this field when ``type`` refers to a capture
+ stream, applications when it refers to an output stream. If the
+ application sets this to 0 for an output stream, then
+ ``bytesused`` will be set to the size of the plane (see the
+ ``length`` field of this struct) by the driver.
+
+ .. note:: Note that the actual image data starts at ``data_offset``
+ which may not be 0.
+
+ - .. row 2
+
+ - __u32
+
+ - ``length``
+
+ -
+ - Size in bytes of the plane (not its payload). This is set by the
+ driver based on the calls to
+ :ref:`VIDIOC_REQBUFS` and/or
+ :ref:`VIDIOC_CREATE_BUFS`.
+
+ - .. row 3
+
+ - union
+
+ - ``m``
+
+ -
+ -
+
+ - .. row 4
+
+ -
+ - __u32
+
+ - ``mem_offset``
+
+ - When the memory type in the containing struct
+ :ref:`v4l2_buffer <v4l2-buffer>` is ``V4L2_MEMORY_MMAP``, this
+ is the value that should be passed to :ref:`mmap() <func-mmap>`,
+ similar to the ``offset`` field in struct
+ :ref:`v4l2_buffer <v4l2-buffer>`.
+
+ - .. row 5
+
+ -
+ - unsigned long
+
+ - ``userptr``
+
+ - When the memory type in the containing struct
+ :ref:`v4l2_buffer <v4l2-buffer>` is ``V4L2_MEMORY_USERPTR``,
+ this is a userspace pointer to the memory allocated for this plane
+ by an application.
+
+ - .. row 6
+
+ -
+ - int
+
+ - ``fd``
+
+ - When the memory type in the containing struct
+ :ref:`v4l2_buffer <v4l2-buffer>` is ``V4L2_MEMORY_DMABUF``,
+ this is a file descriptor associated with a DMABUF buffer, similar
+ to the ``fd`` field in struct :ref:`v4l2_buffer <v4l2-buffer>`.
+
+ - .. row 7
+
+ - __u32
+
+ - ``data_offset``
+
+ -
+ - Offset in bytes to video data in the plane. Drivers must set this
+ field when ``type`` refers to a capture stream, applications when
+ it refers to an output stream.
+
+ .. note:: That data_offset is included in ``bytesused``. So the
+ size of the image in the plane is ``bytesused``-``data_offset``
+ at offset ``data_offset`` from the start of the plane.
+
+ - .. row 8
+
+ - __u32
+
+ - ``reserved[11]``
+
+ -
+ - Reserved for future use. Should be zeroed by drivers and
+ applications.
+
+
+
+.. _v4l2-buf-type:
+
+enum v4l2_buf_type
+==================
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 4
+
+
+ - .. row 1
+
+ - ``V4L2_BUF_TYPE_VIDEO_CAPTURE``
+
+ - 1
+
+ - Buffer of a single-planar video capture stream, see
+ :ref:`capture`.
+
+ - .. row 2
+
+ - ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``
+
+ - 9
+
+ - Buffer of a multi-planar video capture stream, see
+ :ref:`capture`.
+
+ - .. row 3
+
+ - ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
+
+ - 2
+
+ - Buffer of a single-planar video output stream, see
+ :ref:`output`.
+
+ - .. row 4
+
+ - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
+
+ - 10
+
+ - Buffer of a multi-planar video output stream, see :ref:`output`.
+
+ - .. row 5
+
+ - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``
+
+ - 3
+
+ - Buffer for video overlay, see :ref:`overlay`.
+
+ - .. row 6
+
+ - ``V4L2_BUF_TYPE_VBI_CAPTURE``
+
+ - 4
+
+ - Buffer of a raw VBI capture stream, see :ref:`raw-vbi`.
+
+ - .. row 7
+
+ - ``V4L2_BUF_TYPE_VBI_OUTPUT``
+
+ - 5
+
+ - Buffer of a raw VBI output stream, see :ref:`raw-vbi`.
+
+ - .. row 8
+
+ - ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE``
+
+ - 6
+
+ - Buffer of a sliced VBI capture stream, see :ref:`sliced`.
+
+ - .. row 9
+
+ - ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``
+
+ - 7
+
+ - Buffer of a sliced VBI output stream, see :ref:`sliced`.
+
+ - .. row 10
+
+ - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY``
+
+ - 8
+
+ - Buffer for video output overlay (OSD), see :ref:`osd`.
+
+ - .. row 11
+
+ - ``V4L2_BUF_TYPE_SDR_CAPTURE``
+
+ - 11
+
+ - Buffer for Software Defined Radio (SDR) capture stream, see
+ :ref:`sdr`.
+
+ - .. row 12
+
+ - ``V4L2_BUF_TYPE_SDR_OUTPUT``
+
+ - 12
+
+ - Buffer for Software Defined Radio (SDR) output stream, see
+ :ref:`sdr`.
+
+
+
+.. _buffer-flags:
+
+Buffer Flags
+============
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 4
+
+
+ - .. _`V4L2-BUF-FLAG-MAPPED`:
+
+ - ``V4L2_BUF_FLAG_MAPPED``
+
+ - 0x00000001
+
+ - The buffer resides in device memory and has been mapped into the
+ application's address space, see :ref:`mmap` for details.
+ Drivers set or clear this flag when the
+ :ref:`VIDIOC_QUERYBUF`,
+ :ref:`VIDIOC_QBUF` or
+ :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Set by the
+ driver.
+
+ - .. _`V4L2-BUF-FLAG-QUEUED`:
+
+ - ``V4L2_BUF_FLAG_QUEUED``
+
+ - 0x00000002
+
+ - Internally drivers maintain two buffer queues, an incoming and
+ outgoing queue. When this flag is set, the buffer is currently on
+ the incoming queue. It automatically moves to the outgoing queue
+ after the buffer has been filled (capture devices) or displayed
+ (output devices). Drivers set or clear this flag when the
+ ``VIDIOC_QUERYBUF`` ioctl is called. After (successful) calling
+ the ``VIDIOC_QBUF``\ ioctl it is always set and after
+ ``VIDIOC_DQBUF`` always cleared.
+
+ - .. _`V4L2-BUF-FLAG-DONE`:
+
+ - ``V4L2_BUF_FLAG_DONE``
+
+ - 0x00000004
+
+ - When this flag is set, the buffer is currently on the outgoing
+ queue, ready to be dequeued from the driver. Drivers set or clear
+ this flag when the ``VIDIOC_QUERYBUF`` ioctl is called. After
+ calling the ``VIDIOC_QBUF`` or ``VIDIOC_DQBUF`` it is always
+ cleared. Of course a buffer cannot be on both queues at the same
+ time, the ``V4L2_BUF_FLAG_QUEUED`` and ``V4L2_BUF_FLAG_DONE`` flag
+ are mutually exclusive. They can be both cleared however, then the
+ buffer is in "dequeued" state, in the application domain so to
+ say.
+
+ - .. _`V4L2-BUF-FLAG-ERROR`:
+
+ - ``V4L2_BUF_FLAG_ERROR``
+
+ - 0x00000040
+
+ - When this flag is set, the buffer has been dequeued successfully,
+ although the data might have been corrupted. This is recoverable,
+ streaming may continue as normal and the buffer may be reused
+ normally. Drivers set this flag when the ``VIDIOC_DQBUF`` ioctl is
+ called.
+
+ - .. _`V4L2-BUF-FLAG-KEYFRAME`:
+
+ - ``V4L2_BUF_FLAG_KEYFRAME``
+
+ - 0x00000008
+
+ - Drivers set or clear this flag when calling the ``VIDIOC_DQBUF``
+ ioctl. It may be set by video capture devices when the buffer
+ contains a compressed image which is a key frame (or field), i. e.
+ can be decompressed on its own. Also known as an I-frame.
+ Applications can set this bit when ``type`` refers to an output
+ stream.
+
+ - .. _`V4L2-BUF-FLAG-PFRAME`:
+
+ - ``V4L2_BUF_FLAG_PFRAME``
+
+ - 0x00000010
+
+ - Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags predicted frames
+ or fields which contain only differences to a previous key frame.
+ Applications can set this bit when ``type`` refers to an output
+ stream.
+
+ - .. _`V4L2-BUF-FLAG-BFRAME`:
+
+ - ``V4L2_BUF_FLAG_BFRAME``
+
+ - 0x00000020
+
+ - Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags a bi-directional
+ predicted frame or field which contains only the differences
+ between the current frame and both the preceding and following key
+ frames to specify its content. Applications can set this bit when
+ ``type`` refers to an output stream.
+
+ - .. _`V4L2-BUF-FLAG-TIMECODE`:
+
+ - ``V4L2_BUF_FLAG_TIMECODE``
+
+ - 0x00000100
+
+ - The ``timecode`` field is valid. Drivers set or clear this flag
+ when the ``VIDIOC_DQBUF`` ioctl is called. Applications can set
+ this bit and the corresponding ``timecode`` structure when
+ ``type`` refers to an output stream.
+
+ - .. _`V4L2-BUF-FLAG-PREPARED`:
+
+ - ``V4L2_BUF_FLAG_PREPARED``
+
+ - 0x00000400
+
+ - The buffer has been prepared for I/O and can be queued by the
+ application. Drivers set or clear this flag when the
+ :ref:`VIDIOC_QUERYBUF`,
+ :ref:`VIDIOC_PREPARE_BUF <VIDIOC_QBUF>`,
+ :ref:`VIDIOC_QBUF` or
+ :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called.
+
+ - .. _`V4L2-BUF-FLAG-NO-CACHE-INVALIDATE`:
+
+ - ``V4L2_BUF_FLAG_NO_CACHE_INVALIDATE``
+
+ - 0x00000800
+
+ - Caches do not have to be invalidated for this buffer. Typically
+ applications shall use this flag if the data captured in the
+ buffer is not going to be touched by the CPU, instead the buffer
+ will, probably, be passed on to a DMA-capable hardware unit for
+ further processing or output.
+
+ - .. _`V4L2-BUF-FLAG-NO-CACHE-CLEAN`:
+
+ - ``V4L2_BUF_FLAG_NO_CACHE_CLEAN``
+
+ - 0x00001000
+
+ - Caches do not have to be cleaned for this buffer. Typically
+ applications shall use this flag for output buffers if the data in
+ this buffer has not been created by the CPU but by some
+ DMA-capable unit, in which case caches have not been used.
+
+ - .. _`V4L2-BUF-FLAG-LAST`:
+
+ - ``V4L2_BUF_FLAG_LAST``
+
+ - 0x00100000
+
+ - Last buffer produced by the hardware. mem2mem codec drivers set
+ this flag on the capture queue for the last buffer when the
+ :ref:`VIDIOC_QUERYBUF` or
+ :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Due to
+ hardware limitations, the last buffer may be empty. In this case
+ the driver will set the ``bytesused`` field to 0, regardless of
+ the format. Any Any subsequent call to the
+ :ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore,
+ but return an ``EPIPE`` error code.
+
+ - .. _`V4L2-BUF-FLAG-TIMESTAMP-MASK`:
+
+ - ``V4L2_BUF_FLAG_TIMESTAMP_MASK``
+
+ - 0x0000e000
+
+ - Mask for timestamp types below. To test the timestamp type, mask
+ out bits not belonging to timestamp type by performing a logical
+ and operation with buffer flags and timestamp mask.
+
+ - .. _`V4L2-BUF-FLAG-TIMESTAMP-UNKNOWN`:
+
+ - ``V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN``
+
+ - 0x00000000
+
+ - Unknown timestamp type. This type is used by drivers before Linux
+ 3.9 and may be either monotonic (see below) or realtime (wall
+ clock). Monotonic clock has been favoured in embedded systems
+ whereas most of the drivers use the realtime clock. Either kinds
+ of timestamps are available in user space via
+ :c:func:`clock_gettime(2)` using clock IDs ``CLOCK_MONOTONIC``
+ and ``CLOCK_REALTIME``, respectively.
+
+ - .. _`V4L2-BUF-FLAG-TIMESTAMP-MONOTONIC`:
+
+ - ``V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC``
+
+ - 0x00002000
+
+ - The buffer timestamp has been taken from the ``CLOCK_MONOTONIC``
+ clock. To access the same clock outside V4L2, use
+ :c:func:`clock_gettime(2)`.
+
+ - .. _`V4L2-BUF-FLAG-TIMESTAMP-COPY`:
+
+ - ``V4L2_BUF_FLAG_TIMESTAMP_COPY``
+
+ - 0x00004000
+
+ - The CAPTURE buffer timestamp has been taken from the corresponding
+ OUTPUT buffer. This flag applies only to mem2mem devices.
+
+ - .. _`V4L2-BUF-FLAG-TSTAMP-SRC-MASK`:
+
+ - ``V4L2_BUF_FLAG_TSTAMP_SRC_MASK``
+
+ - 0x00070000
+
+ - Mask for timestamp sources below. The timestamp source defines the
+ point of time the timestamp is taken in relation to the frame.
+ Logical 'and' operation between the ``flags`` field and
+ ``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` produces the value of the
+ timestamp source. Applications must set the timestamp source when
+ ``type`` refers to an output stream and
+ ``V4L2_BUF_FLAG_TIMESTAMP_COPY`` is set.
+
+ - .. _`V4L2-BUF-FLAG-TSTAMP-SRC-EOF`:
+
+ - ``V4L2_BUF_FLAG_TSTAMP_SRC_EOF``
+
+ - 0x00000000
+
+ - End Of Frame. The buffer timestamp has been taken when the last
+ pixel of the frame has been received or the last pixel of the
+ frame has been transmitted. In practice, software generated
+ timestamps will typically be read from the clock a small amount of
+ time after the last pixel has been received or transmitten,
+ depending on the system and other activity in it.
+
+ - .. _`V4L2-BUF-FLAG-TSTAMP-SRC-SOE`:
+
+ - ``V4L2_BUF_FLAG_TSTAMP_SRC_SOE``
+
+ - 0x00010000
+
+ - Start Of Exposure. The buffer timestamp has been taken when the
+ exposure of the frame has begun. This is only valid for the
+ ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` buffer type.
+
+
+
+.. _v4l2-memory:
+
+enum v4l2_memory
+================
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 4
+
+
+ - .. row 1
+
+ - ``V4L2_MEMORY_MMAP``
+
+ - 1
+
+ - The buffer is used for :ref:`memory mapping <mmap>` I/O.
+
+ - .. row 2
+
+ - ``V4L2_MEMORY_USERPTR``
+
+ - 2
+
+ - The buffer is used for :ref:`user pointer <userp>` I/O.
+
+ - .. row 3
+
+ - ``V4L2_MEMORY_OVERLAY``
+
+ - 3
+
+ - [to do]
+
+ - .. row 4
+
+ - ``V4L2_MEMORY_DMABUF``
+
+ - 4
+
+ - The buffer is used for :ref:`DMA shared buffer <dmabuf>` I/O.
+
+
+
+Timecodes
+=========
+
+The :ref:`struct v4l2_timecode <v4l2-timecode>` structure is designed to hold a
+:ref:`smpte12m` or similar timecode. (struct
+:c:type:`struct timeval` timestamps are stored in struct
+:ref:`v4l2_buffer <v4l2-buffer>` field ``timestamp``.)
+
+
+.. _v4l2-timecode:
+
+struct v4l2_timecode
+--------------------
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+
+ - .. row 1
+
+ - __u32
+
+ - ``type``
+
+ - Frame rate the timecodes are based on, see :ref:`timecode-type`.
+
+ - .. row 2
+
+ - __u32
+
+ - ``flags``
+
+ - Timecode flags, see :ref:`timecode-flags`.
+
+ - .. row 3
+
+ - __u8
+
+ - ``frames``
+
+ - Frame count, 0 ... 23/24/29/49/59, depending on the type of
+ timecode.
+
+ - .. row 4
+
+ - __u8
+
+ - ``seconds``
+
+ - Seconds count, 0 ... 59. This is a binary, not BCD number.
+
+ - .. row 5
+
+ - __u8
+
+ - ``minutes``
+
+ - Minutes count, 0 ... 59. This is a binary, not BCD number.
+
+ - .. row 6
+
+ - __u8
+
+ - ``hours``
+
+ - Hours count, 0 ... 29. This is a binary, not BCD number.
+
+ - .. row 7
+
+ - __u8
+
+ - ``userbits``\ [4]
+
+ - The "user group" bits from the timecode.
+
+
+
+.. _timecode-type:
+
+Timecode Types
+--------------
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 4
+
+
+ - .. row 1
+
+ - ``V4L2_TC_TYPE_24FPS``
+
+ - 1
+
+ - 24 frames per second, i. e. film.
+
+ - .. row 2
+
+ - ``V4L2_TC_TYPE_25FPS``
+
+ - 2
+
+ - 25 frames per second, i. e. PAL or SECAM video.
+
+ - .. row 3
+
+ - ``V4L2_TC_TYPE_30FPS``
+
+ - 3
+
+ - 30 frames per second, i. e. NTSC video.
+
+ - .. row 4
+
+ - ``V4L2_TC_TYPE_50FPS``
+
+ - 4
+
+ -
+
+ - .. row 5
+
+ - ``V4L2_TC_TYPE_60FPS``
+
+ - 5
+
+ -
+
+
+
+.. _timecode-flags:
+
+Timecode Flags
+--------------
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 4
+
+
+ - .. row 1
+
+ - ``V4L2_TC_FLAG_DROPFRAME``
+
+ - 0x0001
+
+ - Indicates "drop frame" semantics for counting frames in 29.97 fps
+ material. When set, frame numbers 0 and 1 at the start of each
+ minute, except minutes 0, 10, 20, 30, 40, 50 are omitted from the
+ count.
+
+ - .. row 2
+
+ - ``V4L2_TC_FLAG_COLORFRAME``
+
+ - 0x0002
+
+ - The "color frame" flag.
+
+ - .. row 3
+
+ - ``V4L2_TC_USERBITS_field``
+
+ - 0x000C
+
+ - Field mask for the "binary group flags".
+
+ - .. row 4
+
+ - ``V4L2_TC_USERBITS_USERDEFINED``
+
+ - 0x0000
+
+ - Unspecified format.
+
+ - .. row 5
+
+ - ``V4L2_TC_USERBITS_8BITCHARS``
+
+ - 0x0008
+
+ - 8-bit ISO characters.