summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,esai.txt50
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,ssi.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/simple-card.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320aic3x.txt1
4 files changed, 58 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
new file mode 100644
index 000000000000..d7b99fa637b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -0,0 +1,50 @@
+Freescale Enhanced Serial Audio Interface (ESAI) Controller
+
+The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
+for serial communication with a variety of serial devices, including industry
+standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
+other DSPs. It has up to six transmitters and four receivers.
+
+Required properties:
+
+ - compatible : Compatible list, must contain "fsl,imx35-esai".
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+ - clocks: Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "core" The core clock used to access registers
+ "extal" The esai baud clock for esai controller used to derive
+ HCK, SCK and FS.
+ "fsys" The system clock derived from ahb clock used to derive
+ HCK, SCK and FS.
+
+ - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
+ This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM].
+
+ - fsl,esai-synchronous: This is a boolean property. If present, indicating
+ that ESAI would work in the synchronous mode, which means all the settings
+ for Receiving would be duplicated from Transmition related registers.
+
+Example:
+
+esai: esai@02024000 {
+ compatible = "fsl,imx35-esai";
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ clocks = <&clks 208>, <&clks 118>, <&clks 208>;
+ clock-names = "core", "extal", "fsys";
+ dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <128>;
+ fsl,esai-synchronous;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 4303b6ab6208..b93e9a91e30e 100644
--- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -4,7 +4,12 @@ The SSI is a serial device that communicates with audio codecs. It can
be programmed in AC97, I2S, left-justified, or right-justified modes.
Required properties:
-- compatible: Compatible list, contains "fsl,ssi".
+- compatible: Compatible list, should contain one of the following
+ compatibles:
+ fsl,mpc8610-ssi
+ fsl,imx51-ssi
+ fsl,imx35-ssi
+ fsl,imx21-ssi
- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
- reg: Offset and length of the register set for the device.
- interrupts: <a b> where a is the interrupt number and b is a
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index 2ee80c76ca64..e9e20ec67d62 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -11,7 +11,7 @@ Optional properties:
- simple-audio-card,format : CPU/CODEC common audio format.
"i2s", "right_j", "left_j" , "dsp_a"
"dsp_b", "ac97", "pdm", "msb", "lsb"
-- simple-audio-routing : A list of the connections between audio components.
+- simple-audio-card,routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the
connection's sink, the second being the connection's
source.
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
index 5e6040c2c2e9..9d8ea14db490 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible - "string" - One of:
"ti,tlv320aic3x" - Generic TLV320AIC3x device
+ "ti,tlv320aic32x4" - TLV320AIC32x4
"ti,tlv320aic33" - TLV320AIC33
"ti,tlv320aic3007" - TLV320AIC3007
"ti,tlv320aic3106" - TLV320AIC3106