diff options
Diffstat (limited to 'Documentation/devicetree/bindings/reset/nxp,dispmix-clk-en.txt')
-rw-r--r-- | Documentation/devicetree/bindings/reset/nxp,dispmix-clk-en.txt | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/nxp,dispmix-clk-en.txt b/Documentation/devicetree/bindings/reset/nxp,dispmix-clk-en.txt new file mode 100644 index 000000000000..4375039eb072 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/nxp,dispmix-clk-en.txt @@ -0,0 +1,58 @@ +NXP Display Mix clk-en Reset Controller +======================================= + +This binding describes a reset controller device that is used to enable +or disable the internal clocks for all the submodules(such as, LCDIF, +MIPI DSI, MIPI CSI, ISI and etc) included by the Display Mix subsystem +on IMX8MM and IMX8MN platforms. Like sft-rstn, only assert and deassert +functions are required for submodule internal clocks enable or disable, +that means the clk-en can be treated as a real reset controller. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "fsl,imx8mm-dispmix-clk-en" or + "fsl,imx8mn-dispmix-clk-en". +- reg: should be register base and length as documented in the datasheet. +- clocks: phandle and clock specifier to disp apb clock for register access. +- clock-names: should be "disp-apb". +- power-domains: phandle to dispmix power domain. +- reset-cells: 1, see below. + +example: + + dispmix_clk_en: dispmix-clk-en@32e28004 { + compatible = "fsl,imx8mn-dispmix-clk-en"; + reg = <0x0 0x32e28004 0x0 0x4>; + clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>; + clock-names = "disp-apb"; + power-domains = <&dispmix_pd>; + #reset-cells = <1>; + }; + +Specifying clk-en control of devices +==================================== + +Device nodes in Display Mix should specify the reset channel required in +their "resets" property, containing a phandle to the clk-en device node +and an index to specify which channel to use, as described in +Documentation/devicetree/bindings/reset/reset.txt. + +example: + + lcdif_resets: lcdif-resets { + #address-cells = <1>; + #size-cells = <0>; + #reset-cells = <0>; + + lcdif-clk-enable { + compatible = "lcdif,clk-enable"; + resets = <&dispmix_clk_en IMX8MN_LCDIF_APB_CLK_EN>, + <&dispmix_clk_en IMX8MN_LCDIF_PIXEL_CLK_EN>; + }; + }; + +Macro definitions for the supported reset channels can be found in: +include/dt-bindings/reset/imx8mm-dispmix.h and +include/dt-bindings/reset/imx8mn-dispmix.h. |