summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt7
-rw-r--r--Documentation/powerpc/dts-bindings/ecm.txt64
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt3
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/esdhc.txt5
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/mcm.txt64
-rw-r--r--arch/powerpc/Kconfig16
-rw-r--r--arch/powerpc/Kconfig.debug13
-rw-r--r--arch/powerpc/Makefile1
-rw-r--r--arch/powerpc/boot/dts/gef_ppc9a.dts14
-rw-r--r--arch/powerpc/boot/dts/gef_sbc310.dts14
-rw-r--r--arch/powerpc/boot/dts/gef_sbc610.dts14
-rw-r--r--arch/powerpc/boot/dts/ksi8560.dts13
-rw-r--r--arch/powerpc/boot/dts/mpc832x_mds.dts3
-rw-r--r--arch/powerpc/boot/dts/mpc832x_rdb.dts3
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitx.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitxgp.dts1
-rw-r--r--arch/powerpc/boot/dts/mpc834x_mds.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc836x_mds.dts3
-rw-r--r--arch/powerpc/boot/dts/mpc836x_rdk.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8377_mds.dts1
-rw-r--r--arch/powerpc/boot/dts/mpc8378_mds.dts1
-rw-r--r--arch/powerpc/boot/dts/mpc8379_mds.dts1
-rw-r--r--arch/powerpc/boot/dts/mpc8536ds.dts18
-rw-r--r--arch/powerpc/boot/dts/mpc8540ads.dts15
-rw-r--r--arch/powerpc/boot/dts/mpc8541cds.dts16
-rw-r--r--arch/powerpc/boot/dts/mpc8544ds.dts18
-rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dts17
-rw-r--r--arch/powerpc/boot/dts/mpc8555cds.dts16
-rw-r--r--arch/powerpc/boot/dts/mpc8560ads.dts15
-rw-r--r--arch/powerpc/boot/dts/mpc8568mds.dts51
-rw-r--r--arch/powerpc/boot/dts/mpc8569mds.dts583
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds.dts17
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds_36b.dts39
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts16
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts2
-rw-r--r--arch/powerpc/boot/dts/mpc8610_hpcd.dts16
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn.dts16
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts609
-rw-r--r--arch/powerpc/boot/dts/p2020ds.dts704
-rw-r--r--arch/powerpc/boot/dts/sbc8349.dts1
-rw-r--r--arch/powerpc/boot/dts/sbc8548.dts16
-rw-r--r--arch/powerpc/boot/dts/sbc8560.dts15
-rw-r--r--arch/powerpc/boot/dts/sbc8641d.dts16
-rw-r--r--arch/powerpc/boot/dts/sequoia.dts22
-rw-r--r--arch/powerpc/boot/dts/socrates.dts15
-rw-r--r--arch/powerpc/boot/dts/stx_gp3_8560.dts15
-rw-r--r--arch/powerpc/boot/dts/tqm8540.dts15
-rw-r--r--arch/powerpc/boot/dts/tqm8541.dts15
-rw-r--r--arch/powerpc/boot/dts/tqm8548-bigflash.dts16
-rw-r--r--arch/powerpc/boot/dts/tqm8548.dts16
-rw-r--r--arch/powerpc/boot/dts/tqm8555.dts15
-rw-r--r--arch/powerpc/boot/dts/tqm8560.dts15
-rw-r--r--arch/powerpc/boot/dts/virtex440-ml510.dts465
-rw-r--r--arch/powerpc/boot/dts/warp.dts27
-rw-r--r--arch/powerpc/configs/40x/acadia_defconfig2
-rw-r--r--arch/powerpc/configs/40x/ep405_defconfig2
-rw-r--r--arch/powerpc/configs/40x/kilauea_defconfig81
-rw-r--r--arch/powerpc/configs/40x/makalu_defconfig81
-rw-r--r--arch/powerpc/configs/40x/virtex_defconfig2
-rw-r--r--arch/powerpc/configs/44x/arches_defconfig2
-rw-r--r--arch/powerpc/configs/44x/bamboo_defconfig2
-rw-r--r--arch/powerpc/configs/44x/canyonlands_defconfig6
-rw-r--r--arch/powerpc/configs/44x/ebony_defconfig2
-rw-r--r--arch/powerpc/configs/44x/katmai_defconfig2
-rw-r--r--arch/powerpc/configs/44x/rainier_defconfig2
-rw-r--r--arch/powerpc/configs/44x/redwood_defconfig2
-rw-r--r--arch/powerpc/configs/44x/sam440ep_defconfig2
-rw-r--r--arch/powerpc/configs/44x/sequoia_defconfig111
-rw-r--r--arch/powerpc/configs/44x/taishan_defconfig2
-rw-r--r--arch/powerpc/configs/44x/virtex5_defconfig2
-rw-r--r--arch/powerpc/include/asm/cpm2.h4
-rw-r--r--arch/powerpc/include/asm/dma-mapping.h11
-rw-r--r--arch/powerpc/include/asm/elf.h4
-rw-r--r--arch/powerpc/include/asm/emulated_ops.h73
-rw-r--r--arch/powerpc/include/asm/feature-fixups.h25
-rw-r--r--arch/powerpc/include/asm/lppaca.h6
-rw-r--r--arch/powerpc/include/asm/machdep.h4
-rw-r--r--arch/powerpc/include/asm/mmu.h9
-rw-r--r--arch/powerpc/include/asm/mpc86xx.h33
-rw-r--r--arch/powerpc/include/asm/paca.h12
-rw-r--r--arch/powerpc/include/asm/page.h5
-rw-r--r--arch/powerpc/include/asm/pci-bridge.h13
-rw-r--r--arch/powerpc/include/asm/pgtable-ppc64.h5
-rw-r--r--arch/powerpc/include/asm/ppc-opcode.h25
-rw-r--r--arch/powerpc/include/asm/ppc_asm.h10
-rw-r--r--arch/powerpc/include/asm/ptrace.h4
-rw-r--r--arch/powerpc/include/asm/qe.h21
-rw-r--r--arch/powerpc/include/asm/scatterlist.h6
-rw-r--r--arch/powerpc/include/asm/swiotlb.h27
-rw-r--r--arch/powerpc/include/asm/system.h2
-rw-r--r--arch/powerpc/include/asm/xilinx_pci.h21
-rw-r--r--arch/powerpc/kernel/Makefile4
-rw-r--r--arch/powerpc/kernel/align.c20
-rw-r--r--arch/powerpc/kernel/asm-offsets.c32
-rw-r--r--arch/powerpc/kernel/cputable.c6
-rw-r--r--arch/powerpc/kernel/dma-swiotlb.c163
-rw-r--r--arch/powerpc/kernel/dma.c2
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S978
-rw-r--r--arch/powerpc/kernel/ftrace.c29
-rw-r--r--arch/powerpc/kernel/head_32.S101
-rw-r--r--arch/powerpc/kernel/head_64.S1095
-rw-r--r--arch/powerpc/kernel/head_booke.h10
-rw-r--r--arch/powerpc/kernel/irq.c123
-rw-r--r--arch/powerpc/kernel/lparcfg.c40
-rw-r--r--arch/powerpc/kernel/misc_64.S92
-rw-r--r--arch/powerpc/kernel/paca.c14
-rw-r--r--arch/powerpc/kernel/pci-common.c3
-rw-r--r--arch/powerpc/kernel/pci_32.c19
-rw-r--r--arch/powerpc/kernel/pci_64.c17
-rw-r--r--arch/powerpc/kernel/pci_dn.c28
-rw-r--r--arch/powerpc/kernel/process.c2
-rw-r--r--arch/powerpc/kernel/prom.c2
-rw-r--r--arch/powerpc/kernel/ptrace.c23
-rw-r--r--arch/powerpc/kernel/rtas_pci.c10
-rw-r--r--arch/powerpc/kernel/setup_32.c6
-rw-r--r--arch/powerpc/kernel/setup_64.c11
-rw-r--r--arch/powerpc/kernel/time.c21
-rw-r--r--arch/powerpc/kernel/traps.c130
-rw-r--r--arch/powerpc/kernel/vector.S210
-rw-r--r--arch/powerpc/mm/Makefile7
-rw-r--r--arch/powerpc/mm/hash_native_64.c13
-rw-r--r--arch/powerpc/mm/init_64.c2
-rw-r--r--arch/powerpc/mm/mmu_context_nohash.c19
-rw-r--r--arch/powerpc/mm/numa.c2
-rw-r--r--arch/powerpc/oprofile/op_model_fsl_emb.c14
-rw-r--r--arch/powerpc/platforms/40x/Kconfig2
-rw-r--r--arch/powerpc/platforms/40x/Makefile2
-rw-r--r--arch/powerpc/platforms/40x/kilauea.c60
-rw-r--r--arch/powerpc/platforms/40x/makalu.c60
-rw-r--r--arch/powerpc/platforms/40x/ppc40x_simple.c5
-rw-r--r--arch/powerpc/platforms/40x/virtex.c2
-rw-r--r--arch/powerpc/platforms/44x/Kconfig13
-rw-r--r--arch/powerpc/platforms/44x/Makefile1
-rw-r--r--arch/powerpc/platforms/44x/virtex.c2
-rw-r--r--arch/powerpc/platforms/44x/virtex_ml510.c29
-rw-r--r--arch/powerpc/platforms/44x/warp.c76
-rw-r--r--arch/powerpc/platforms/52xx/efika.c4
-rw-r--r--arch/powerpc/platforms/52xx/mpc52xx_pci.c4
-rw-r--r--arch/powerpc/platforms/82xx/pq2ads.h13
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ds.c43
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c52
-rw-r--r--arch/powerpc/platforms/86xx/gef_ppc9a.c1
-rw-r--r--arch/powerpc/platforms/86xx/gef_sbc310.c1
-rw-r--r--arch/powerpc/platforms/86xx/gef_sbc610.c1
-rw-r--r--arch/powerpc/platforms/86xx/mpc8610_hpcd.c1
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c1
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_smp.c8
-rw-r--r--arch/powerpc/platforms/86xx/sbc8641d.c1
-rw-r--r--arch/powerpc/platforms/8xx/mpc885ads.h4
-rw-r--r--arch/powerpc/platforms/Kconfig4
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype26
-rw-r--r--arch/powerpc/platforms/cell/celleb_pci.c10
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc_epci.c13
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc_pciex.c12
-rw-r--r--arch/powerpc/platforms/cell/spufs/inode.c6
-rw-r--r--arch/powerpc/platforms/chrp/pci.c8
-rw-r--r--arch/powerpc/platforms/fsl_uli1575.c24
-rw-r--r--arch/powerpc/platforms/iseries/iommu.c2
-rw-r--r--arch/powerpc/platforms/iseries/pci.c8
-rw-r--r--arch/powerpc/platforms/powermac/pic.c2
-rw-r--r--arch/powerpc/platforms/powermac/setup.c2
-rw-r--r--arch/powerpc/platforms/ps3/smp.c16
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c4
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c52
-rw-r--r--arch/powerpc/platforms/pseries/rtasd.c76
-rw-r--r--arch/powerpc/platforms/pseries/setup.c25
-rw-r--r--arch/powerpc/sysdev/Makefile1
-rw-r--r--arch/powerpc/sysdev/cpm2.c2
-rw-r--r--arch/powerpc/sysdev/fsl_msi.c9
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c138
-rw-r--r--arch/powerpc/sysdev/fsl_pci.h6
-rw-r--r--arch/powerpc/sysdev/fsl_rio.c15
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c14
-rw-r--r--arch/powerpc/sysdev/indirect_pci.c4
-rw-r--r--arch/powerpc/sysdev/mpic.c23
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.c4
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c75
-rw-r--r--arch/powerpc/sysdev/tsi108_pci.c4
-rw-r--r--arch/powerpc/sysdev/xilinx_intc.c81
-rw-r--r--arch/powerpc/sysdev/xilinx_pci.c132
-rw-r--r--arch/powerpc/xmon/xmon.c47
-rw-r--r--drivers/char/viotape.c2
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c6
-rw-r--r--drivers/macintosh/therm_adt746x.c4
-rw-r--r--drivers/net/ucc_geth.c24
-rw-r--r--drivers/net/ucc_geth.h4
-rw-r--r--drivers/of/base.c1
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/rapidio/rio-scan.c6
-rw-r--r--drivers/video/xilinxfb.c290
-rw-r--r--include/linux/pci_ids.h4
192 files changed, 6189 insertions, 2355 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5f66ba295c5d..ad3800630772 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -491,6 +491,13 @@ and is between 256 and 4096 characters. It is defined in the file
Also note the kernel might malfunction if you disable
some critical bits.
+ cmo_free_hint= [PPC] Format: { yes | no }
+ Specify whether pages are marked as being inactive
+ when they are freed. This is used in CMO environments
+ to determine OS memory pressure for page stealing by
+ a hypervisor.
+ Default: yes
+
code_bytes [X86] How many bytes of object code to print
in an oops report.
Range: 0 - 8192
diff --git a/Documentation/powerpc/dts-bindings/ecm.txt b/Documentation/powerpc/dts-bindings/ecm.txt
new file mode 100644
index 000000000000..f514f29c67d6
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/ecm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+E500 LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured. For ECM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,ecm-law"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - fsl,num-laws
+ Usage: required
+ Value type: <u32>
+ Definition: The value specifies the number of local access
+ windows for this device.
+
+=====================================================================
+
+E500 Coherency Module Node
+
+The E500 LAW node represents the region of CCSR space where ECM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where
+ CHIP is the processor (mpc8572, mpc8544, etc.)
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ - interrupt-parent
+ Usage: required
+ Value type: <phandle>
+
+=====================================================================
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 78790d58dc2c..6e37be1eeb2d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -17,6 +17,9 @@ Required properties:
- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
- reg : offset and length of the device registers.
- bus-frequency : the clock frequency for QUICC Engine.
+- fsl,qe-num-riscs: define how many RISC engines the QE has.
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
+ threads.
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 600846557763..5093ddf900da 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -5,8 +5,7 @@ for MMC, SD, and SDIO types of memory cards.
Required properties:
- compatible : should be
- "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
- "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+ "fsl,<chip>-esdhc", "fsl,esdhc"
- reg : should contain eSDHC registers location and length.
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
@@ -15,7 +14,7 @@ Required properties:
Example:
sdhci@2e000 {
- compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+ compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
diff --git a/Documentation/powerpc/dts-bindings/fsl/mcm.txt b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
new file mode 100644
index 000000000000..4ceda9b3b413
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+MPX LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured. For MCM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,mcm-law"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - fsl,num-laws
+ Usage: required
+ Value type: <u32>
+ Definition: The value specifies the number of local access
+ windows for this device.
+
+=====================================================================
+
+MPX Coherency Module Node
+
+The MPX LAW node represents the region of CCSR space where MCM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where
+ CHIP is the processor (mpc8641, mpc8610, etc.)
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ - interrupt-parent
+ Usage: required
+ Value type: <phandle>
+
+=====================================================================
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index cdc9a6ff4be8..93a61898b259 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,10 @@ config GENERIC_HARDIRQS
bool
default y
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ bool
+ default y
+
config HAVE_SETUP_PER_CPU_AREA
def_bool PPC64
@@ -296,9 +300,19 @@ config IOMMU_VMERGE
config IOMMU_HELPER
def_bool PPC64
+config SWIOTLB
+ bool "SWIOTLB support"
+ default n
+ select IOMMU_HELPER
+ ---help---
+ Support for IO bounce buffering for systems without an IOMMU.
+ This allows us to DMA to the full physical address space on
+ platforms where the size of a physical address is larger
+ than the bus address. Not all platforms support this.
+
config PPC_NEED_DMA_SYNC_OPS
def_bool y
- depends on NOT_COHERENT_CACHE
+ depends on (NOT_COHERENT_CACHE || SWIOTLB)
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index a1098e23221f..d79a902d155a 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,6 +41,19 @@ config HCALL_STATS
This option will add a small amount of overhead to all hypervisor
calls.
+config PPC_EMULATED_STATS
+ bool "Emulated instructions tracking"
+ depends on DEBUG_FS
+ help
+ Adds code to keep track of the number of instructions that are
+ emulated by the in-kernel emulator. Counters for the various classes
+ of emulated instructions are available under
+ powerpc/emulated_instructions/ in the root of the debugfs file
+ system. Optionally (controlled by
+ powerpc/emulated_instructions/do_warn in debugfs), rate-limited
+ warnings can be printed to the console when instructions are
+ emulated.
+
config CODE_PATCHING_SELFTEST
bool "Run self-tests of the code-patching code."
depends on DEBUG_KERNEL
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 551fc58c05cf..bc35f4e2b81c 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -142,6 +142,7 @@ head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o
head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
+head-$(CONFIG_ALTIVEC) += arch/powerpc/kernel/vector.o
core-y += arch/powerpc/kernel/ \
arch/powerpc/mm/ \
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 53a7a6255909..910944edd886 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -164,9 +164,21 @@
device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
- reg = <0xfef00000 0x100000>; // CCSRBAR 1M
bus-frequency = <33333333>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c1: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 1569117e5ddc..0f4c9ec2c3a6 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -163,9 +163,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
- reg = <0xfef00000 0x100000>; // CCSRBAR 1M
bus-frequency = <33333333>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c1: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 6582dbd36da7..217f8aa66725 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -128,9 +128,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
- reg = <0xfef00000 0x100000>; // CCSRBAR 1M
bus-frequency = <33333333>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c1: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index c9cfd374bffb..bdb7fc0fa332 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -56,6 +56,19 @@
ranges = <0x00000000 0xfdf00000 0x00100000>;
bus-frequency = <0>; /* Fixed by bootwrapper */
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 57c595bf1071..436c9c671dd9 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -249,6 +249,8 @@
reg = <0xe0100000 0x480>;
brg-frequency = <0>;
bus-frequency = <198000000>;
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
@@ -369,7 +371,6 @@
};
pci0: pci@e0008500 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 4319bd70a580..9a0952f74b81 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -221,6 +221,8 @@
reg = <0xe0100000 0x480>;
brg-frequency = <0>;
bus-frequency = <198000000>;
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
@@ -327,7 +329,6 @@
};
pci0: pci@e0008500 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 1ae38f0ddef8..e3eeaeda9187 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -278,7 +278,6 @@
};
pci0: pci@e0008500 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 - SATA */
@@ -301,7 +300,6 @@
};
pci1: pci@e0008600 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0E - MiniPCI Slot */
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 662abe1fb804..eb732115f016 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -227,7 +227,6 @@
};
pci0: pci@e0008600 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0F - PCI Slot */
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index d9f0a2325fa4..a2553a6f9009 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -286,7 +286,6 @@
};
pci0: pci@e0008500 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
@@ -348,7 +347,6 @@
};
pci1: pci@e0008600 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 6e34f170fa62..39ff4c829caf 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -289,6 +289,8 @@
reg = <0xe0100000 0x480>;
brg-frequency = <0>;
bus-frequency = <396000000>;
+ fsl,qe-num-riscs = <2>;
+ fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
@@ -410,7 +412,6 @@
};
pci0: pci@e0008500 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 37b789510d68..6315d6fcc58a 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -198,6 +198,8 @@
clock-frequency = <0>;
bus-frequency = <0>;
brg-frequency = <0>;
+ fsl,qe-num-riscs = <2>;
+ fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 963708017e6c..67bb372c9451 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -383,7 +383,6 @@
};
pci0: pci@e0008500 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 651ff2f9db2d..a955a577db81 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -367,7 +367,6 @@
};
pci0: pci@e0008500 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index d6f208b8297a..d266ddbfc28d 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -397,7 +397,6 @@
};
pci0: pci@e0008500 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index b31c5041350b..e781ad2f1f8a 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -51,9 +51,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
- reg = <0xffe00000 0x1000>;
bus-frequency = <0>; // Filled out by uboot.
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8536-memory-controller";
reg = <0x2000 0x1000>;
@@ -321,7 +333,6 @@
};
pci0: pci@ffe08000 {
- cell-index = <0>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
@@ -346,7 +357,6 @@
};
pci1: pcie@ffe09000 {
- cell-index = <1>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -383,7 +393,6 @@
};
pci2: pcie@ffe0a000 {
- cell-index = <2>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -420,7 +429,6 @@
};
pci3: pcie@ffe0b000 {
- cell-index = <3>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index ddd67be10b03..9dc292962a9a 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -55,9 +55,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x100000>; // CCSRBAR 1M
bus-frequency = <0>;
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
reg = <0x2000 0x1000>;
@@ -258,7 +270,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index e45097f44fbd..9a3ad311aedf 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -55,9 +55,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,8541-memory-controller";
reg = <0x2000 0x1000>;
@@ -272,7 +284,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
@@ -344,7 +355,6 @@
};
pci1: pci@e0009000 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 7c6932be0197..98e94b465662 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -57,9 +57,21 @@
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled out by uboot.
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,8544-memory-controller";
reg = <0x2000 0x1000>;
@@ -274,7 +286,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
@@ -306,7 +317,6 @@
};
pci1: pcie@e0009000 {
- cell-index = <1>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -343,7 +353,6 @@
};
pci2: pcie@e000a000 {
- cell-index = <2>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -380,7 +389,6 @@
};
pci3: pcie@e000b000 {
- cell-index = <3>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 804e90353293..475be1433fe1 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -60,9 +60,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
reg = <0x2000 0x1000>;
@@ -328,7 +340,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
@@ -478,7 +489,6 @@
};
pci1: pci@e0009000 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
@@ -503,7 +513,6 @@
};
pci2: pcie@e000a000 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 9484f0729b10..065b2f093de2 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -55,9 +55,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x1000>; // CCSRBAR 1M
bus-frequency = <0>;
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,8555-memory-controller";
reg = <0x2000 0x1000>;
@@ -272,7 +284,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
@@ -344,7 +355,6 @@
};
pci1: pci@e0009000 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index cc2acf87d02f..a5bb1ec70a5a 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -55,9 +55,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x200>;
bus-frequency = <330000000>;
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,8540-memory-controller";
reg = <0x2000 0x1000>;
@@ -291,7 +303,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 9d52e3b25047..00c2bbda7013 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -26,6 +26,7 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
+ rapidio0 = &rio0;
};
cpus {
@@ -62,9 +63,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,8568-memory-controller";
reg = <0x2000 0x1000>;
@@ -275,6 +288,22 @@
device_type = "open-pic";
};
+ msi@41600 {
+ compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
par_io@e0100 {
reg = <0xe0100 0x100>;
device_type = "par_io";
@@ -349,6 +378,8 @@
reg = <0xe0080000 0x480>;
brg-frequency = <0>;
bus-frequency = <396000000>;
+ fsl,qe-num-riscs = <2>;
+ fsl,qe-num-snums = <28>;
muram@10000 {
#address-cells = <1>;
@@ -459,7 +490,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
@@ -490,7 +520,6 @@
/* PCI Express */
pci1: pcie@e000a000 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
@@ -526,4 +555,20 @@
0x0 0x800000>;
};
};
+
+ rio0: rapidio@e00c00000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
+ reg = <0xe00c0000 0x20000>;
+ ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
+ interrupts = <48 2 /* error */
+ 49 2 /* bell_outb */
+ 50 2 /* bell_inb */
+ 53 2 /* msg1_tx */
+ 54 2 /* msg1_rx */
+ 55 2 /* msg2_tx */
+ 56 2 /* msg2_rx */>;
+ interrupt-parent = <&mpic>;
+ };
};
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
new file mode 100644
index 000000000000..39c2927503cf
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -0,0 +1,583 @@
+/*
+ * MPC8569E MDS Device Tree Source
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MPC8569EMDS";
+ compatible = "fsl,MPC8569EMDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci1 = &pci1;
+ rapidio0 = &rio0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8569@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0xfe000000 0x02000000
+ 0x1 0x0 0xf8000000 0x00008000
+ 0x2 0x0 0xf0000000 0x04000000
+ 0x3 0x0 0xfc000000 0x00008000
+ 0x4 0x0 0xf8008000 0x00008000
+ 0x5 0x0 0xf8010000 0x00008000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x02000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ bcsr@1,0 {
+ compatible = "fsl,mpc8569mds-bcsr";
+ reg = <1 0 0x8000>;
+ };
+
+ nand@3,0 {
+ compatible = "fsl,mpc8569-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <3 0 0x8000>;
+ };
+
+ pib@4,0 {
+ compatible = "fsl,mpc8569mds-pib";
+ reg = <4 0 0x8000>;
+ };
+
+ pib@5,0 {
+ compatible = "fsl,mpc8569mds-pib";
+ reg = <5 0 0x8000>;
+ };
+ };
+
+ soc@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8569-immr", "simple-bus";
+ ranges = <0x0 0xe0000000 0x100000>;
+ bus-frequency = <0>;
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8569-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8569-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x8>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8569-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ par_io@e0100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe0100 0x100>;
+ ranges = <0x0 0xe0100 0x100>;
+ device_type = "par_io";
+ num-ports = <7>;
+
+ qe_pio_e: gpio-controller@80 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8569-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x80 0x18>;
+ gpio-controller;
+ };
+
+ pio1: ucc_pin@01 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
+ 0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */
+ 0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */
+ 0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */
+ 0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
+ 0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */
+ 0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */
+ 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
+ 0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
+ 0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
+ 0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */
+ 0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */
+ 0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */
+ };
+
+ pio2: ucc_pin@02 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
+ 0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */
+ 0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */
+ 0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */
+ 0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */
+ 0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */
+ 0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */
+ 0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */
+ 0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */
+ 0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */
+ 0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */
+ 0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */
+ 0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */
+ };
+
+ pio3: ucc_pin@03 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
+ 0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */
+ 0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */
+ 0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */
+ 0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */
+ 0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */
+ 0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */
+ 0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */
+ 0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */
+ 0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */
+ 0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */
+ 0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */
+ 0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */
+ };
+
+ pio4: ucc_pin@04 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
+ 0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */
+ 0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */
+ 0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */
+ 0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */
+ 0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */
+ 0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */
+ 0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */
+ 0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */
+ 0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */
+ 0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */
+ 0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */
+ 0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */
+ };
+ };
+ };
+
+ qe@e0080000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ ranges = <0x0 0xe0080000 0x40000>;
+ reg = <0xe0080000 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ fsl,qe-num-riscs = <4>;
+ fsl,qe-num-snums = <46>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 46 2>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+ reg = <0x4c0 0x40>;
+ cell-index = <0>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ gpios = <&qe_pio_e 30 0>;
+ mode = "cpu-qe";
+
+ serial-flash@0 {
+ compatible = "stm,m25p40";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ spi@500 {
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu";
+ };
+
+ enet0: ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk12";
+ pio-handle = <&pio1>;
+ phy-handle = <&qe_phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+
+ qe_phy0: ethernet-phy@07 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1>;
+ reg = <0x7>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy1: ethernet-phy@01 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy2: ethernet-phy@02 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy3: ethernet-phy@03 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet2: ucc@2200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk12";
+ pio-handle = <&pio3>;
+ phy-handle = <&qe_phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ucc@3000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk17";
+ pio-handle = <&pio2>;
+ phy-handle = <&qe_phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet3: ucc@3200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <4>;
+ reg = <0x3200 0x200>;
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk17";
+ pio-handle = <&pio4>;
+ phy-handle = <&qe_phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x20000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x20000>;
+ };
+ };
+
+ };
+
+ /* PCI Express */
+ pci1: pcie@e000a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe000a000 0x1000>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 (PEX) */
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+ clock-frequency = <33333333>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x10000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x800000>;
+ };
+ };
+
+ rio0: rapidio@e00c00000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
+ reg = <0xe00c0000 0x20000>;
+ ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
+ interrupts = <48 2 /* error */
+ 49 2 /* bell_outb */
+ 50 2 /* bell_inb */
+ 53 2 /* msg1_tx */
+ 54 2 /* msg1_rx */
+ 55 2 /* msg2_tx */
+ 56 2 /* msg2_rx */>;
+ interrupt-parent = <&mpic>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 6e79a4169088..cafc1285c140 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -182,9 +182,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0 0xffe00000 0x100000>;
- reg = <0 0xffe00000 0 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
@@ -514,7 +526,6 @@
};
pci0: pcie@ffe08000 {
- cell-index = <0>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -724,7 +735,6 @@
};
pci1: pcie@ffe09000 {
- cell-index = <1>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -761,7 +771,6 @@
};
pci2: pcie@ffe0a000 {
- cell-index = <2>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index dbd81a764742..f6365db3b97d 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -182,9 +182,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xf 0xffe00000 0x100000>;
- reg = <0xf 0xffe00000 0 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
@@ -514,7 +526,6 @@
};
pci0: pcie@fffe08000 {
- cell-index = <0>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -522,7 +533,7 @@
#address-cells = <3>;
reg = <0xf 0xffe08000 0 0x1000>;
bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x00000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
@@ -649,8 +660,8 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
@@ -660,8 +671,8 @@
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
@@ -724,7 +735,6 @@
};
pci1: pcie@fffe09000 {
- cell-index = <1>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -732,7 +742,7 @@
#address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
@@ -750,8 +760,8 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
@@ -761,7 +771,6 @@
};
pci2: pcie@fffe0a000 {
- cell-index = <2>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -769,7 +778,7 @@
#address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
@@ -787,8 +796,8 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 2bc0c7189653..5bd1011fde96 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -59,9 +59,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
- reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
@@ -238,7 +250,6 @@
};
pci0: pcie@ffe08000 {
- cell-index = <0>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -448,7 +459,6 @@
};
pci1: pcie@ffe09000 {
- cell-index = <1>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 159cb3a875f0..0efc3456e297 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -58,7 +58,6 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
- reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
bus-frequency = <0>; // Filled out by uboot.
L2: l2-cache-controller@20000 {
@@ -196,7 +195,6 @@
};
pci2: pcie@ffe0a000 {
- cell-index = <2>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1bd3ebe11437..cfc2c60d1f5f 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -112,9 +112,21 @@
device_type = "soc";
compatible = "fsl,mpc8610-immr", "simple-bus";
ranges = <0x0 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8610-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -316,7 +328,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
compatible = "fsl,mpc8610-pci";
device_type = "pci";
#interrupt-cells = <1>;
@@ -346,7 +357,6 @@
};
pci1: pcie@e000a000 {
- cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index d72beb192460..848320e4d3c4 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -114,9 +114,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x00000000 0xffe00000 0x00100000>;
- reg = <0xffe00000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -357,7 +369,6 @@
};
pci0: pcie@ffe08000 {
- cell-index = <0>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -566,7 +577,6 @@
};
pci1: pcie@ffe09000 {
- cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
new file mode 100644
index 000000000000..8be8e701e1d3
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -0,0 +1,609 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MPC8641HPCN";
+ compatible = "fsl,mpc8641hpcn";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8641@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ PowerPC,8641@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <32768>; // L1, 32K
+ i-cache-size = <32768>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // From uboot
+ clock-frequency = <0>; // From uboot
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0
+ };
+
+ localbus@fffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-localbus", "simple-bus";
+ reg = <0x0f 0xffe05000 0x0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0 0 0xf 0xef800000 0x00800000
+ 2 0 0xf 0xffdf8000 0x00008000
+ 3 0 0xf 0xffdf0000 0x00008000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00300000>;
+ };
+ partition@300000 {
+ label = "firmware b";
+ reg = <0x00300000 0x00100000>;
+ read-only;
+ };
+ partition@400000 {
+ label = "fs";
+ reg = <0x00400000 0x00300000>;
+ };
+ partition@700000 {
+ label = "firmware a";
+ reg = <0x00700000 0x00100000>;
+ read-only;
+ };
+ };
+ };
+
+ soc8641@fffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
+ bus-frequency = <0>;
+
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8641-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet3: ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <28 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8641-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@fffe08000 {
+ cell-index = <0>;
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x0f 0xffe08000 0x0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0 0 1 &mpic 2 1
+ 0x8800 0 0 2 &mpic 3 1
+ 0x8800 0 0 3 &mpic 4 1
+ 0x8800 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0 0 1 &mpic 2 1
+ 0x8900 0 0 2 &mpic 3 1
+ 0x8900 0 0 3 &mpic 4 1
+ 0x8900 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0 0 1 &mpic 2 1
+ 0x8a00 0 0 2 &mpic 3 1
+ 0x8a00 0 0 3 &mpic 4 1
+ 0x8a00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0 0 1 &mpic 2 1
+ 0x8b00 0 0 2 &mpic 3 1
+ 0x8b00 0 0 3 &mpic 4 1
+ 0x8b00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0 0 1 &mpic 2 1
+ 0x8c00 0 0 2 &mpic 3 1
+ 0x8c00 0 0 3 &mpic 4 1
+ 0x8c00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0 0 1 &mpic 2 1
+ 0x8d00 0 0 2 &mpic 3 1
+ 0x8d00 0 0 3 &mpic 4 1
+ 0x8d00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0 0 1 &mpic 2 1
+ 0x8e00 0 0 2 &mpic 3 1
+ 0x8e00 0 0 3 &mpic 4 1
+ 0x8e00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0 0 1 &mpic 2 1
+ 0x8f00 0 0 2 &mpic 3 1
+ 0x8f00 0 0 3 &mpic 4 1
+ 0x8f00 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0 0 1 &mpic 3 1
+ 0x9000 0 0 2 &mpic 4 1
+ 0x9000 0 0 3 &mpic 1 1
+ 0x9000 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0 0 1 &mpic 3 1
+ 0x9100 0 0 2 &mpic 4 1
+ 0x9100 0 0 3 &mpic 1 1
+ 0x9100 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0 0 1 &mpic 3 1
+ 0x9200 0 0 2 &mpic 4 1
+ 0x9200 0 0 3 &mpic 1 1
+ 0x9200 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0 0 1 &mpic 3 1
+ 0x9300 0 0 2 &mpic 4 1
+ 0x9300 0 0 3 &mpic 1 1
+ 0x9300 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0 0 1 &mpic 3 1
+ 0x9400 0 0 2 &mpic 4 1
+ 0x9400 0 0 3 &mpic 1 1
+ 0x9400 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0 0 1 &mpic 3 1
+ 0x9500 0 0 2 &mpic 4 1
+ 0x9500 0 0 3 &mpic 1 1
+ 0x9500 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0 0 1 &mpic 3 1
+ 0x9600 0 0 2 &mpic 4 1
+ 0x9600 0 0 3 &mpic 1 1
+ 0x9600 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0 0 1 &mpic 3 1
+ 0x9700 0 0 2 &mpic 4 1
+ 0x9700 0 0 3 &mpic 1 1
+ 0x9700 0 0 4 &mpic 2 1
+
+ // IDSEL 0x1c USB
+ 0xe000 0 0 1 &i8259 12 2
+ 0xe100 0 0 2 &i8259 9 2
+ 0xe200 0 0 3 &i8259 10 2
+ 0xe300 0 0 4 &i8259 11 2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0 0 1 &i8259 6 2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0 0 1 &i8259 7 2
+ 0xf100 0 0 1 &i8259 7 2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0 0 1 &i8259 14 2
+ 0xf900 0 0 1 &i8259 5 2
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xe0000000
+ 0x02000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ uli1575@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x02000000 0x0 0xe0000000
+ 0x02000000 0x0 0xe0000000
+ 0x0 0x20000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0 0 0 0>;
+ ranges = <1 0 0x01000000 0 0
+ 0x00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <1 0x60 1 1 0x64 1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible =
+ "pnpPNP,b00";
+ reg = <1 0x70 2>;
+ };
+
+ gpio@400 {
+ reg = <1 0x400 0x80>;
+ };
+ };
+ };
+ };
+
+ };
+
+ pci1: pcie@fffe09000 {
+ cell-index = <1>;
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x0f 0xffe09000 0x0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0xe0000000
+ 0x02000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00010000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
new file mode 100644
index 000000000000..11019142813c
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -0,0 +1,704 @@
+/*
+ * P2020 DS Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020DS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+ 0x1 0x0 0x0 0xe0000000 0x08000000
+ 0x2 0x0 0x0 0xffa00000 0x00040000
+ 0x3 0x0 0x0 0xffdf0000 0x00008000
+ 0x4 0x0 0x0 0xffa40000 0x00040000
+ 0x5 0x0 0x0 0xffa80000 0x00040000
+ 0x6 0x0 0x0 0xffac0000 0x00040000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ ranges = <0x0 0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@7000 {
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512k
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe08000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe08000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+
+ pci1: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ // IDSEL 0x11 func 0 - PCI slot 1
+ 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 1 - PCI slot 1
+ 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 2 - PCI slot 1
+ 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 3 - PCI slot 1
+ 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 4 - PCI slot 1
+ 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 5 - PCI slot 1
+ 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 6 - PCI slot 1
+ 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 7 - PCI slot 1
+ 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <4 1>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+
+ };
+
+ pci2: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index a36dbbc48694..5fb6f6684b0e 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -278,7 +278,6 @@
};
pci0: pci@e0008500 {
- cell-index = <1>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index b1f1416ac998..9eefe00ed253 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -151,10 +151,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x00000000 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
compatible = "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8548-memory-controller";
reg = <0x2000 0x1000>;
@@ -350,7 +362,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x01 (PCI-X slot) @66MHz */
@@ -380,7 +391,6 @@
};
pci2: pcie@e000a000 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index c4564b81e473..239d57a55cf4 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -57,9 +57,21 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xff700000 0x00100000>;
- reg = <0xff700000 0x00100000>;
clock-frequency = <0>;
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8560-memory-controller";
reg = <0x2000 0x1000>;
@@ -296,7 +308,6 @@
};
pci0: pci@ff708000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index e3e914e78caa..ee5538feb455 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -126,9 +126,21 @@
device_type = "soc";
compatible = "simple-bus";
ranges = <0x00000000 0xf8000000 0x00100000>;
- reg = <0xf8000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ mcm-law@0 {
+ compatible = "fsl,mcm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ mcm@1000 {
+ compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -371,7 +383,6 @@
};
pci0: pcie@f8008000 {
- cell-index = <0>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
@@ -410,7 +421,6 @@
};
pci1: pcie@f8009000 {
- cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 43cc68bd3192..739dd0da2416 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -199,6 +199,28 @@
};
};
+ ndfc@3,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000003 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00084000>;
+ };
+ partition@84000 {
+ label = "user";
+ reg = <0x00000000 0x01f7c000>;
+ };
+ };
+ };
};
UART0: serial@ef600300 {
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
index 7a6ae75a1e57..feb4ef6bd144 100644
--- a/arch/powerpc/boot/dts/socrates.dts
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -55,10 +55,22 @@
device_type = "soc";
ranges = <0x00000000 0xe0000000 0x00100000>;
- reg = <0xe0000000 0x00001000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled in by U-Boot
compatible = "fsl,mpc8544-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8544-memory-controller";
reg = <0x2000 0x1000>;
@@ -314,7 +326,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index ea6b15152de3..b670d03fbcd9 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -52,10 +52,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0 0xfdf00000 0x100000>;
- reg = <0xfdf00000 0x1000>;
bus-frequency = <0>;
compatible = "fsl,mpc8560-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
@@ -251,7 +263,6 @@
};
pci0: pci@fdf08000 {
- cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index b6f1fc6eb960..71347537b83e 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -54,10 +54,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x200>;
bus-frequency = <0>;
compatible = "fsl,mpc8540-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
@@ -266,7 +278,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index fa6a3d54a8a5..b30f63753d41 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -53,10 +53,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x200>;
bus-frequency = <0>;
compatible = "fsl,mpc8541-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
@@ -288,7 +300,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 00f7ed7a2455..61f25e15fd66 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -55,10 +55,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xa0000000 0x100000>;
- reg = <0xa0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
compatible = "fsl,mpc8548-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8548-memory-controller";
reg = <0x2000 0x1000>;
@@ -419,7 +431,6 @@
};
pci0: pci@a0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -441,7 +452,6 @@
};
pci1: pcie@a000a000 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 673e4a778ac8..025759c7c955 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -55,10 +55,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
compatible = "fsl,mpc8548-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8548-memory-controller";
reg = <0x2000 0x1000>;
@@ -419,7 +431,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -441,7 +452,6 @@
};
pci1: pcie@e000a000 {
- cell-index = <2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 6a99f1eef7ad..95e287381836 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -53,10 +53,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x200>;
bus-frequency = <0>;
compatible = "fsl,mpc8555-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
@@ -288,7 +300,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index b6c2d71defd3..ff70580a8f4c 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -55,10 +55,22 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xe0000000 0x100000>;
- reg = <0xe0000000 0x200>;
bus-frequency = <0>;
compatible = "fsl,mpc8560-immr", "simple-bus";
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <8>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
memory-controller@2000 {
compatible = "fsl,mpc8540-memory-controller";
reg = <0x2000 0x1000>;
@@ -359,7 +371,6 @@
};
pci0: pci@e0008000 {
- cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
diff --git a/arch/powerpc/boot/dts/virtex440-ml510.dts b/arch/powerpc/boot/dts/virtex440-ml510.dts
new file mode 100644
index 000000000000..81a8dc2c6365
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml510.dts
@@ -0,0 +1,465 @@
+/*
+ * Xilinx ML510 Reference Design support
+ *
+ * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
+ * The reference design contains a bug which prevent PCI DMA from working
+ * properly. A description of the bug is given in the plbv46_pci section. It
+ * needs to be fixed by the user until Xilinx updates their reference design.
+ *
+ * Copyright 2009, Roderick Colenbrander
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,ml510-ref-design", "xlnx,virtex440";
+ dcr-parent = <&ppc440_0>;
+ DDR2_SDRAM_DIMM0: memory@0 {
+ device_type = "memory";
+ reg = < 0x0 0x20000000 >;
+ } ;
+ alias {
+ ethernet0 = &Hard_Ethernet_MAC;
+ serial0 = &RS232_Uart_1;
+ } ;
+ chosen {
+ bootargs = "console=ttyS0 root=/dev/ram";
+ linux,stdout-path = "/plb@0/serial@83e00000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ ppc440_0: cpu@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clock-frequency = <300000000>;
+ compatible = "PowerPC,440", "ibm,ppc440";
+ d-cache-line-size = <0x20>;
+ d-cache-size = <0x8000>;
+ dcr-access-method = "native";
+ dcr-controller ;
+ device_type = "cpu";
+ i-cache-line-size = <0x20>;
+ i-cache-size = <0x8000>;
+ model = "PowerPC,440";
+ reg = <0>;
+ timebase-frequency = <300000000>;
+ xlnx,apu-control = <0x2000>;
+ xlnx,apu-udi-0 = <0x0>;
+ xlnx,apu-udi-1 = <0x0>;
+ xlnx,apu-udi-10 = <0x0>;
+ xlnx,apu-udi-11 = <0x0>;
+ xlnx,apu-udi-12 = <0x0>;
+ xlnx,apu-udi-13 = <0x0>;
+ xlnx,apu-udi-14 = <0x0>;
+ xlnx,apu-udi-15 = <0x0>;
+ xlnx,apu-udi-2 = <0x0>;
+ xlnx,apu-udi-3 = <0x0>;
+ xlnx,apu-udi-4 = <0x0>;
+ xlnx,apu-udi-5 = <0x0>;
+ xlnx,apu-udi-6 = <0x0>;
+ xlnx,apu-udi-7 = <0x0>;
+ xlnx,apu-udi-8 = <0x0>;
+ xlnx,apu-udi-9 = <0x0>;
+ xlnx,dcr-autolock-enable = <0x1>;
+ xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
+ xlnx,dcu-rd-noncache-plb-prio = <0x0>;
+ xlnx,dcu-rd-touch-plb-prio = <0x0>;
+ xlnx,dcu-rd-urgent-plb-prio = <0x0>;
+ xlnx,dcu-wr-flush-plb-prio = <0x0>;
+ xlnx,dcu-wr-store-plb-prio = <0x0>;
+ xlnx,dcu-wr-urgent-plb-prio = <0x0>;
+ xlnx,dma0-control = <0x0>;
+ xlnx,dma0-plb-prio = <0x0>;
+ xlnx,dma0-rxchannelctrl = <0x1010000>;
+ xlnx,dma0-rxirqtimer = <0x3ff>;
+ xlnx,dma0-txchannelctrl = <0x1010000>;
+ xlnx,dma0-txirqtimer = <0x3ff>;
+ xlnx,dma1-control = <0x0>;
+ xlnx,dma1-plb-prio = <0x0>;
+ xlnx,dma1-rxchannelctrl = <0x1010000>;
+ xlnx,dma1-rxirqtimer = <0x3ff>;
+ xlnx,dma1-txchannelctrl = <0x1010000>;
+ xlnx,dma1-txirqtimer = <0x3ff>;
+ xlnx,dma2-control = <0x0>;
+ xlnx,dma2-plb-prio = <0x0>;
+ xlnx,dma2-rxchannelctrl = <0x1010000>;
+ xlnx,dma2-rxirqtimer = <0x3ff>;
+ xlnx,dma2-txchannelctrl = <0x1010000>;
+ xlnx,dma2-txirqtimer = <0x3ff>;
+ xlnx,dma3-control = <0x0>;
+ xlnx,dma3-plb-prio = <0x0>;
+ xlnx,dma3-rxchannelctrl = <0x1010000>;
+ xlnx,dma3-rxirqtimer = <0x3ff>;
+ xlnx,dma3-txchannelctrl = <0x1010000>;
+ xlnx,dma3-txirqtimer = <0x3ff>;
+ xlnx,endian-reset = <0x0>;
+ xlnx,generate-plb-timespecs = <0x1>;
+ xlnx,icu-rd-fetch-plb-prio = <0x0>;
+ xlnx,icu-rd-spec-plb-prio = <0x0>;
+ xlnx,icu-rd-touch-plb-prio = <0x0>;
+ xlnx,interconnect-imask = <0xffffffff>;
+ xlnx,mplb-allow-lock-xfer = <0x1>;
+ xlnx,mplb-arb-mode = <0x0>;
+ xlnx,mplb-awidth = <0x20>;
+ xlnx,mplb-counter = <0x500>;
+ xlnx,mplb-dwidth = <0x80>;
+ xlnx,mplb-max-burst = <0x8>;
+ xlnx,mplb-native-dwidth = <0x80>;
+ xlnx,mplb-p2p = <0x0>;
+ xlnx,mplb-prio-dcur = <0x2>;
+ xlnx,mplb-prio-dcuw = <0x3>;
+ xlnx,mplb-prio-icu = <0x4>;
+ xlnx,mplb-prio-splb0 = <0x1>;
+ xlnx,mplb-prio-splb1 = <0x0>;
+ xlnx,mplb-read-pipe-enable = <0x1>;
+ xlnx,mplb-sync-tattribute = <0x0>;
+ xlnx,mplb-wdog-enable = <0x1>;
+ xlnx,mplb-write-pipe-enable = <0x1>;
+ xlnx,mplb-write-post-enable = <0x1>;
+ xlnx,num-dma = <0x0>;
+ xlnx,pir = <0xf>;
+ xlnx,ppc440mc-addr-base = <0x0>;
+ xlnx,ppc440mc-addr-high = <0x1fffffff>;
+ xlnx,ppc440mc-arb-mode = <0x0>;
+ xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
+ xlnx,ppc440mc-control = <0xf810008f>;
+ xlnx,ppc440mc-max-burst = <0x8>;
+ xlnx,ppc440mc-prio-dcur = <0x2>;
+ xlnx,ppc440mc-prio-dcuw = <0x3>;
+ xlnx,ppc440mc-prio-icu = <0x4>;
+ xlnx,ppc440mc-prio-splb0 = <0x1>;
+ xlnx,ppc440mc-prio-splb1 = <0x0>;
+ xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
+ xlnx,ppcdm-asyncmode = <0x0>;
+ xlnx,ppcds-asyncmode = <0x0>;
+ xlnx,user-reset = <0x0>;
+ } ;
+ } ;
+ plb_v46_0: plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+ ranges ;
+ FLASH: flash@fc000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xfc000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x2710>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x2>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x1adb0>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ethernet@81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b";
+ device_type = "network";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 2 >;
+ llink-connected = <&Hard_Ethernet_MAC_fifo>;
+ local-mac-address = [ 02 00 00 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x3>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x8000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x8000>;
+ } ;
+ } ;
+ Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 {
+ compatible = "xlnx,xps-ll-fifo-1.01.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81a00000 0x10000 >;
+ xlnx,family = "virtex5";
+ } ;
+ IIC_EEPROM: i2c@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 9 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x5f5e100>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x5>;
+ xlnx,sda-inertial-delay = <0x5>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LCD_OPTIONAL: gpio@81420000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ reg = < 0x81420000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0xb>;
+ xlnx,interrupt-present = <0x0>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ } ;
+ LEDs_4Bit: gpio@81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x4>;
+ xlnx,interrupt-present = <0x0>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ } ;
+ RS232_Uart_1: serial@83e00000 {
+ clock-frequency = <100000000>;
+ compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+ current-speed = <9600>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 11 2 >;
+ reg = < 0x83e00000 0x10000 >;
+ reg-offset = <0x1003>;
+ reg-shift = <2>;
+ xlnx,family = "virtex5";
+ xlnx,has-external-rclk = <0x0>;
+ xlnx,has-external-xin = <0x0>;
+ xlnx,is-a-16550 = <0x1>;
+ } ;
+ SPI_EEPROM: xps-spi@feff8000 {
+ compatible = "xlnx,xps-spi-2.00.b";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 10 2 >;
+ reg = < 0xfeff8000 0x80 >;
+ xlnx,family = "virtex5";
+ xlnx,fifo-exist = <0x1>;
+ xlnx,num-ss-bits = <0x1>;
+ xlnx,num-transfer-bits = <0x8>;
+ xlnx,sck-ratio = <0x80>;
+ } ;
+ SysACE_CompactFlash: sysace@83600000 {
+ compatible = "xlnx,xps-sysace-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x83600000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,mem-width = <0x10>;
+ } ;
+ plbv46_pci_0: plbv46-pci@85e00000 {
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "xlnx,plbv46-pci-1.03.a";
+ device_type = "pci";
+ reg = < 0x85e00000 0x10000 >;
+
+ /*
+ * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to
+ * 0 which means that a read/write to the memory mapped
+ * i/o region (which starts at 0xa0000000) for pci
+ * bar 0 on the plb side translates to 0.
+ * It is important to set this value to 0xa0000000, so
+ * that inbound and outbound pci transactions work
+ * properly including DMA.
+ */
+ ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf0000000 0 0x00010000>;
+
+ #interrupt-cells = <1>;
+ interrupt-parent = <&xps_intc_0>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IRQ mapping for pci slots and ALI M1533
+ * periperhals. In total there are 5 interrupt
+ * lines connected to a xps_intc controller.
+ * Four of them are PCI IRQ A, B, C, D and
+ * which correspond to respectively xpx_intc
+ * 5, 4, 3 and 2. The fifth interrupt line is
+ * connected to the south bridge and this one
+ * uses irq 1 and is active high instead of
+ * active low.
+ *
+ * The M1533 contains various peripherals
+ * including AC97 audio, a modem, USB, IDE and
+ * some power management stuff. The modem
+ * isn't connected on the ML510 and the power
+ * management core also isn't used.
+ */
+
+ /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
+ 0x3000 0 0 1 &xps_intc_0 3 2
+ 0x3000 0 0 2 &xps_intc_0 2 2
+ 0x3000 0 0 3 &xps_intc_0 5 2
+ 0x3000 0 0 4 &xps_intc_0 4 2
+
+ /* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
+ /*
+ 0x11800 0 0 1 &xps_intc_0 5 0 2
+ 0x11800 0 0 2 &xps_intc_0 4 0 2
+ 0x11800 0 0 3 &xps_intc_0 3 0 2
+ 0x11800 0 0 4 &xps_intc_0 2 0 2
+ */
+
+ /* According to the datasheet + schematic
+ * ABCD [FPGA] of slot 5 is mapped to DABC.
+ * Testing showed that at least A maps to B,
+ * the mapping of the other pins is a guess
+ * and for that reason the lines have been
+ * commented out.
+ */
+ /* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
+ 0x2800 0 0 1 &xps_intc_0 4 2
+ /*
+ 0x2800 0 0 2 &xps_intc_0 3 2
+ 0x2800 0 0 3 &xps_intc_0 2 2
+ 0x2800 0 0 4 &xps_intc_0 5 2
+ */
+
+ /* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
+ /*
+ 0x11000 0 0 1 &xps_intc_0 4 0 2
+ 0x11000 0 0 2 &xps_intc_0 3 0 2
+ 0x11000 0 0 3 &xps_intc_0 2 0 2
+ 0x11000 0 0 4 &xps_intc_0 5 0 2
+ */
+
+ /* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
+ 0x0800 0 0 1 &i8259 7 2
+
+ /* IDSEL 0x1b / dev=11, bus=0 / IDE */
+ 0x5800 0 0 1 &i8259 14 2
+
+ /* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
+ 0x7800 0 0 1 &i8259 7 2
+ >;
+ ali_m1533 {
+ #size-cells = <1>;
+ #address-cells = <2>;
+ i8259: interrupt-controller@20 {
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+
+ /* south bridge irq is active high */
+ interrupts = <1 3>;
+ interrupt-parent = <&xps_intc_0>;
+ };
+ };
+ } ;
+ xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+ compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+ reg = < 0xffff0000 0x10000 >;
+ xlnx,family = "virtex5";
+ } ;
+ xps_intc_0: interrupt-controller@81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,num-intr-inputs = <0xc>;
+ } ;
+ xps_tft_0: tft@86e00000 {
+ compatible = "xlnx,xps-tft-1.00.a";
+ reg = < 0x86e00000 0x10000 >;
+ xlnx,dcr-splb-slave-if = <0x1>;
+ xlnx,default-tft-base-addr = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,i2c-slave-addr = <0x76>;
+ xlnx,mplb-awidth = <0x20>;
+ xlnx,mplb-dwidth = <0x80>;
+ xlnx,mplb-native-dwidth = <0x40>;
+ xlnx,mplb-smallest-slave = <0x20>;
+ xlnx,tft-interface = <0x1>;
+ } ;
+ } ;
+} ;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 7e183ff9a317..01bfb56bbe80 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for PIKA Warp
*
- * Copyright (c) 2008 PIKA Technologies
+ * Copyright (c) 2008-2009 PIKA Technologies
* Sean MacLennan <smaclennan@pikatech.com>
*
* This file is licensed under the terms of the GNU General Public
@@ -158,7 +158,7 @@
partition@0 {
label = "splash";
- reg = <0x00000000 0x00020000>;
+ reg = <0x00000000 0x00010000>;
};
partition@300000 {
label = "fpga";
@@ -244,28 +244,27 @@
};
GPIO0: gpio@ef600b00 {
- compatible = "ibm,gpio-440ep";
+ compatible = "ibm,ppc4xx-gpio";
reg = <0xef600b00 0x00000048>;
#gpio-cells = <2>;
gpio-controller;
};
GPIO1: gpio@ef600c00 {
- compatible = "ibm,gpio-440ep";
+ compatible = "ibm,ppc4xx-gpio";
reg = <0xef600c00 0x00000048>;
#gpio-cells = <2>;
gpio-controller;
+ };
- led@31 {
- compatible = "linux,gpio-led";
- linux,name = ":green:";
- gpios = <&GPIO1 31 0>;
- };
-
- led@30 {
- compatible = "linux,gpio-led";
- linux,name = ":red:";
- gpios = <&GPIO1 30 0>;
+ power-leds {
+ compatible = "gpio-leds";
+ green {
+ gpios = <&GPIO1 0 0>;
+ default-state = "on";
+ };
+ red {
+ gpios = <&GPIO1 1 0>;
};
};
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index a32ec8d323a0..173a5bb77ca1 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -252,7 +252,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 4e9d85f39da0..e9b8495cde0c 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -254,7 +254,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 9917a09bad3a..865725effe93 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:52 2009
+# Linux kernel version: 2.6.30-rc7
+# Wed Jun 3 10:18:16 2009
#
# CONFIG_PPC64 is not set
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
@@ -49,10 +50,12 @@ CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -67,9 +70,19 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -84,22 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,10 +124,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -132,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -148,11 +165,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
@@ -170,7 +182,7 @@ CONFIG_KILAUEA=y
# CONFIG_MAKALU is not set
# CONFIG_WALNUT is not set
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_PPC40x_SIMPLE=y
CONFIG_405EX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -228,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -252,9 +267,10 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +288,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -329,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -341,7 +356,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -445,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -498,6 +511,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -512,6 +526,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +556,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -706,6 +722,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -749,6 +770,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -760,7 +782,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -776,6 +797,7 @@ CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -790,11 +812,12 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -812,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -841,9 +867,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -851,17 +880,21 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -892,10 +925,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -964,6 +999,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -972,5 +1008,6 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 58bf2ac2e0dd..146747547873 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Wed Jun 3 09:11:02 2009
#
# CONFIG_PPC64 is not set
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
@@ -49,10 +50,12 @@ CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -67,9 +70,19 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -84,22 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,10 +124,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -132,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -148,11 +165,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
@@ -170,7 +182,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
CONFIG_MAKALU=y
# CONFIG_WALNUT is not set
# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_PPC40x_SIMPLE=y
CONFIG_405EX=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -228,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -252,9 +267,10 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -272,14 +288,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -329,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -341,7 +356,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -445,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -498,6 +511,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -512,6 +526,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
@@ -540,7 +556,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -678,6 +693,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -706,6 +722,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -749,6 +770,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -760,7 +782,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -776,6 +797,7 @@ CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -790,11 +812,12 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -812,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -841,9 +867,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -851,17 +880,21 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -892,10 +925,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -964,6 +999,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -972,5 +1008,6 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index f5698f962e58..416e79ac0711 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -258,7 +258,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 1d72b0ac3f25..f7fd32c09424 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -258,7 +258,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 959bdc43a491..e57f1e4c1795 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index f9a08ee49b96..5e85412eb9fa 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
@@ -716,7 +716,7 @@ CONFIG_SSB_POSSIBLE=y
#
# Multimedia drivers
#
-CONFIG_DAB=y
+# CONFIG_DAB is not set
# CONFIG_USB_DABUSB is not set
#
@@ -725,7 +725,7 @@ CONFIG_DAB=y
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index be64aa644d15..b652f7dcab5a 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -261,7 +261,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index f67250b24ec5..c23a4ef13e45 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -256,7 +256,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 9348c12bd7a6..b25fad1343dc 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -260,7 +260,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index e665433762ba..ed31d4f17b5a 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -265,7 +265,7 @@ CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 70d5c3fa3283..e14e89a5e06b 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -262,7 +262,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index a921fe3c3711..6400aae04dda 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:45 2009
+# Linux kernel version: 2.6.29
+# Tue Apr 7 17:04:52 2009
#
# CONFIG_PPC64 is not set
@@ -57,6 +57,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_PPC_DCR_NATIVE=y
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -74,6 +75,15 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -88,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
@@ -99,10 +113,8 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -112,10 +124,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -123,6 +137,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -135,7 +150,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -151,11 +165,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
@@ -176,6 +185,7 @@ CONFIG_SEQUOIA=y
# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
# CONFIG_YOSEMITE is not set
# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
CONFIG_PPC44x_SIMPLE=y
@@ -238,9 +248,13 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -262,9 +276,10 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -278,18 +293,16 @@ CONFIG_PCI_LEGACY=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -339,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -351,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -448,14 +461,23 @@ CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -483,12 +505,16 @@ CONFIG_BLK_DEV_RAM_SIZE=35000
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -515,6 +541,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -529,6 +556,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBM_NEW_EMAC=y
@@ -568,6 +597,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -577,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -586,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -593,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -734,7 +765,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -750,6 +781,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -778,6 +810,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -842,7 +879,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -858,6 +894,7 @@ CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -873,11 +910,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -924,9 +962,12 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -934,17 +975,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -952,20 +996,7 @@ CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-CONFIG_PPC_EARLY_DEBUG_44x=y
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
@@ -988,10 +1019,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1060,6 +1093,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1068,5 +1102,6 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 826700872d26..ef32cc4f82eb 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -260,7 +260,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 1bf0a63614b1..2518b8568c70 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -263,7 +263,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 0f5e8ff59a85..990ff191da8b 100644
--- a/arch/powerpc/include/asm/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -14,10 +14,6 @@
#include <asm/cpm.h>
#include <sysdev/fsl_soc.h>
-#ifdef CONFIG_PPC_85xx
-#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
-#endif
-
/* CPM Command register.
*/
#define CPM_CR_RST ((uint)0x80000000)
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index cb448d68452c..3d9e887c3c0c 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -15,9 +15,18 @@
#include <linux/scatterlist.h>
#include <linux/dma-attrs.h>
#include <asm/io.h>
+#include <asm/swiotlb.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0x0)
+/* Some dma direct funcs must be visible for use in other dma_ops */
+extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag);
+extern void dma_direct_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+extern unsigned long get_dma_direct_offset(struct device *dev);
+
#ifdef CONFIG_NOT_COHERENT_CACHE
/*
* DMA-consistent mapping functions for PowerPCs that don't support
@@ -78,6 +87,8 @@ struct dma_mapping_ops {
dma_addr_t dma_address, size_t size,
enum dma_data_direction direction,
struct dma_attrs *attrs);
+ int (*addr_needs_map)(struct device *dev, dma_addr_t addr,
+ size_t size);
#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
void (*sync_single_range_for_cpu)(struct device *hwdev,
dma_addr_t dma_handle, unsigned long offset,
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index d6b4a12cdeff..014a624f4c8e 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -256,11 +256,11 @@ do { \
* even if we have an executable stack.
*/
# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
- (exec_stk != EXSTACK_DISABLE_X) : 0)
+ (exec_stk == EXSTACK_DEFAULT) : 0)
#else
# define SET_PERSONALITY(ex) \
set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X)
+# define elf_read_implies_exec(ex, exec_stk) (exec_stk == EXSTACK_DEFAULT)
#endif /* __powerpc64__ */
extern int dcache_bsize;
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
new file mode 100644
index 000000000000..9154e8526732
--- /dev/null
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2007 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ASM_POWERPC_EMULATED_OPS_H
+#define _ASM_POWERPC_EMULATED_OPS_H
+
+#include <asm/atomic.h>
+
+
+#ifdef CONFIG_PPC_EMULATED_STATS
+
+struct ppc_emulated_entry {
+ const char *name;
+ atomic_t val;
+};
+
+extern struct ppc_emulated {
+#ifdef CONFIG_ALTIVEC
+ struct ppc_emulated_entry altivec;
+#endif
+ struct ppc_emulated_entry dcba;
+ struct ppc_emulated_entry dcbz;
+ struct ppc_emulated_entry fp_pair;
+ struct ppc_emulated_entry isel;
+ struct ppc_emulated_entry mcrxr;
+ struct ppc_emulated_entry mfpvr;
+ struct ppc_emulated_entry multiple;
+ struct ppc_emulated_entry popcntb;
+ struct ppc_emulated_entry spe;
+ struct ppc_emulated_entry string;
+ struct ppc_emulated_entry unaligned;
+#ifdef CONFIG_MATH_EMULATION
+ struct ppc_emulated_entry math;
+#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
+ struct ppc_emulated_entry 8xx;
+#endif
+#ifdef CONFIG_VSX
+ struct ppc_emulated_entry vsx;
+#endif
+} ppc_emulated;
+
+extern u32 ppc_warn_emulated;
+
+extern void ppc_warn_emulated_print(const char *type);
+
+#define PPC_WARN_EMULATED(type) \
+ do { \
+ atomic_inc(&ppc_emulated.type.val); \
+ if (ppc_warn_emulated) \
+ ppc_warn_emulated_print(ppc_emulated.type.name); \
+ } while (0)
+
+#else /* !CONFIG_PPC_EMULATED_STATS */
+
+#define PPC_WARN_EMULATED(type) do { } while (0)
+
+#endif /* !CONFIG_PPC_EMULATED_STATS */
+
+#endif /* _ASM_POWERPC_EMULATED_OPS_H */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index e4094a5cb05b..cbd4dfa4bce2 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -8,8 +8,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#ifdef __ASSEMBLY__
-
/*
* Feature section common macros
*
@@ -23,10 +21,12 @@
/* 64 bits kernel, 32 bits code (ie. vdso32) */
#define FTR_ENTRY_LONG .llong
#define FTR_ENTRY_OFFSET .long 0xffffffff; .long
+#elif defined(CONFIG_PPC64)
+#define FTR_ENTRY_LONG .llong
+#define FTR_ENTRY_OFFSET .llong
#else
-/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
-#define FTR_ENTRY_LONG PPC_LONG
-#define FTR_ENTRY_OFFSET PPC_LONG
+#define FTR_ENTRY_LONG .long
+#define FTR_ENTRY_OFFSET .long
#endif
#define START_FTR_SECTION(label) label##1:
@@ -141,6 +141,21 @@ label##5: \
#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \
ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+#ifndef __ASSEMBLY__
+
+#define ASM_MMU_FTR_IF(section_if, section_else, msk, val) \
+ stringify_in_c(BEGIN_MMU_FTR_SECTION) \
+ section_if "; " \
+ stringify_in_c(MMU_FTR_SECTION_ELSE) \
+ section_else "; " \
+ stringify_in_c(ALT_MMU_FTR_SECTION_END((msk), (val)))
+
+#define ASM_MMU_FTR_IFSET(section_if, section_else, msk) \
+ ASM_MMU_FTR_IF(section_if, section_else, (msk), (msk))
+
+#define ASM_MMU_FTR_IFCLR(section_if, section_else, msk) \
+ ASM_MMU_FTR_IF(section_if, section_else, (msk), 0)
+
#endif /* __ASSEMBLY__ */
/* LWSYNC feature sections */
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index d2a65e8ca6ae..f78f65c38f05 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -20,6 +20,11 @@
#define _ASM_POWERPC_LPPACA_H
#ifdef __KERNEL__
+/* These definitions relate to hypervisors that only exist when using
+ * a server type processor
+ */
+#ifdef CONFIG_PPC_BOOK3S
+
//=============================================================================
//
// This control block contains the data that is shared between the
@@ -158,5 +163,6 @@ struct slb_shadow {
extern struct slb_shadow slb_shadow[];
+#endif /* CONFIG_PPC_BOOK3S */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 0efdb1dfdc5f..11d1fc3a8962 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -110,6 +110,10 @@ struct machdep_calls {
void (*show_percpuinfo)(struct seq_file *m, int i);
void (*init_IRQ)(void);
+
+ /* Return an irq, or NO_IRQ to indicate there are none pending.
+ * If for some reason there is no irq, but the interrupt
+ * shouldn't be counted as spurious, return NO_IRQ_IGNORE. */
unsigned int (*get_irq)(void);
#ifdef CONFIG_KEXEC
void (*kexec_cpu_down)(int crash_shutdown, int secondary);
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cbf154387091..fb57ded592f9 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,6 +52,11 @@
*/
#define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000)
+/* This indicates that the processor uses the ISA 2.06 server tlbie
+ * mnemonics
+ */
+#define MMU_FTR_TLBIE_206 ASM_CONST(0x00400000)
+
#ifndef __ASSEMBLY__
#include <asm/cputable.h>
@@ -69,10 +74,10 @@ extern void early_init_mmu_secondary(void);
#endif /* !__ASSEMBLY__ */
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC_STD_MMU_64)
/* 64-bit classic hash table MMU */
# include <asm/mmu-hash64.h>
-#elif defined(CONFIG_PPC_STD_MMU)
+#elif defined(CONFIG_PPC_STD_MMU_32)
/* 32-bit classic hash table MMU */
# include <asm/mmu-hash32.h>
#elif defined(CONFIG_40x)
diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
deleted file mode 100644
index 15f650f987e7..000000000000
--- a/arch/powerpc/include/asm/mpc86xx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * MPC86xx definitions
- *
- * Author: Jeff Brown
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_POWERPC_MPC86xx_H__
-#define __ASM_POWERPC_MPC86xx_H__
-
-#include <asm/mmu.h>
-
-#ifdef CONFIG_PPC_86xx
-
-#define CPU0_BOOT_RELEASE 0x01000000
-#define CPU1_BOOT_RELEASE 0x02000000
-#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
-#define MCM_PORT_CONFIG_OFFSET 0x1010
-
-/* Offset from CCSRBAR */
-#define MPC86xx_MCM_OFFSET (0x00000)
-#define MPC86xx_MCM_SIZE (0x02000)
-
-#endif /* CONFIG_PPC_86xx */
-#endif /* __ASM_POWERPC_MPC86xx_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 6ef055723019..c8a3cbfe02ff 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -43,6 +43,7 @@ struct task_struct;
* processor.
*/
struct paca_struct {
+#ifdef CONFIG_PPC_BOOK3S
/*
* Because hw_cpu_id, unlike other paca fields, is accessed
* routinely from other CPUs (from the IRQ code), we stick to
@@ -51,7 +52,7 @@ struct paca_struct {
*/
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
-
+#endif /* CONFIG_PPC_BOOK3S */
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
* load lock_token and paca_index with a single lwz
@@ -64,13 +65,16 @@ struct paca_struct {
u64 kernel_toc; /* Kernel TOC address */
u64 kernelbase; /* Base address of kernel */
u64 kernel_msr; /* MSR while running in kernel */
+#ifdef CONFIG_PPC_STD_MMU_64
u64 stab_real; /* Absolute address of segment table */
u64 stab_addr; /* Virtual address of segment table */
+#endif /* CONFIG_PPC_STD_MMU_64 */
void *emergency_sp; /* pointer to emergency stack */
u64 data_offset; /* per cpu data offset */
s16 hw_cpu_id; /* Physical processor number */
u8 cpu_start; /* At startup, processor spins until */
/* this becomes non-zero. */
+#ifdef CONFIG_PPC_STD_MMU_64
struct slb_shadow *slb_shadow_ptr;
/*
@@ -81,11 +85,13 @@ struct paca_struct {
u64 exmc[10]; /* used for machine checks */
u64 exslb[10]; /* used for SLB/segment table misses
* on the linear mapping */
-
- mm_context_t context;
+ /* SLB related definitions */
u16 vmalloc_sllp;
u16 slb_cache_ptr;
u16 slb_cache[SLB_CACHE_ENTRIES];
+#endif /* CONFIG_PPC_STD_MMU_64 */
+
+ mm_context_t context;
/*
* then miscellaneous read-write fields
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 32cbf16f10ea..4940662ee87e 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -231,6 +231,11 @@ extern void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *p);
extern int page_is_ram(unsigned long pfn);
+#ifdef CONFIG_PPC_SMLPAR
+void arch_free_page(struct page *page, int order);
+#define HAVE_ARCH_FREE_PAGE
+#endif
+
struct vm_area_struct;
typedef struct page *pgtable_t;
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 84007afabdb5..4c61fa0b8d75 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -86,17 +86,12 @@ struct pci_controller {
void *io_base_alloc;
#endif
resource_size_t io_base_phys;
-#ifndef CONFIG_PPC64
resource_size_t pci_io_size;
-#endif
/* Some machines (PReP) have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
resource_size_t pci_mem_offset;
-#ifdef CONFIG_PPC64
- unsigned long pci_io_size;
-#endif
/* Some machines have a special region to forward the ISA
* "memory" cycles such as VGA memory regions. Left to 0
@@ -140,10 +135,12 @@ struct pci_controller {
struct resource io_resource;
struct resource mem_resources[3];
int global_number; /* PCI domain number */
+
+ resource_size_t dma_window_base_cur;
+ resource_size_t dma_window_size;
+
#ifdef CONFIG_PPC64
unsigned long buid;
- unsigned long dma_window_base_cur;
- unsigned long dma_window_size;
void *private_data;
#endif /* CONFIG_PPC64 */
@@ -185,7 +182,6 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
extern void setup_indirect_pci(struct pci_controller* hose,
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags);
-extern void setup_grackle(struct pci_controller *hose);
#else /* CONFIG_PPC64 */
/*
@@ -221,6 +217,7 @@ struct pci_dn {
#define PCI_DN(dn) ((struct pci_dn *) (dn)->data)
extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
+extern void * update_dn_pci_info(struct device_node *dn, void *data);
/* Get a device_node from a pci_dev. This code must be fast except
* in the case where the sysdata is incorrect and needs to be fixed
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index c40db05f21e0..8cd083c61503 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -31,9 +31,11 @@
#error TASK_SIZE_USER64 exceeds pagetable range
#endif
+#ifdef CONFIG_PPC_STD_MMU_64
#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
+#endif
/*
* Define the address range of the vmalloc VM area.
@@ -199,8 +201,11 @@ static inline unsigned long pte_update(struct mm_struct *mm,
if (!huge)
assert_pte_locked(mm, addr);
+#ifdef CONFIG_PPC_STD_MMU_64
if (old & _PAGE_HASHPTE)
hpte_need_flush(mm, addr, ptep, old, huge);
+#endif
+
return old;
}
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 640ccbbc0977..b74f16d45cb4 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -25,6 +25,7 @@
#define PPC_INST_LSWI 0x7c0004aa
#define PPC_INST_LSWX 0x7c00042a
#define PPC_INST_LWSYNC 0x7c2004ac
+#define PPC_INST_LXVD2X 0x7c000698
#define PPC_INST_MCRXR 0x7c000400
#define PPC_INST_MCRXR_MASK 0xfc0007fe
#define PPC_INST_MFSPR_PVR 0x7c1f42a6
@@ -43,14 +44,18 @@
#define PPC_INST_STSWI 0x7c0005aa
#define PPC_INST_STSWX 0x7c00052a
+#define PPC_INST_STXVD2X 0x7c000798
+#define PPC_INST_TLBIE 0x7c000264
#define PPC_INST_TLBILX 0x7c000024
#define PPC_INST_WAIT 0x7c00007c
/* macros to insert fields into opcodes */
-#define __PPC_RA(a) ((a & 0x1f) << 16)
-#define __PPC_RB(b) ((b & 0x1f) << 11)
-#define __PPC_T_TLB(t) ((t & 0x3) << 21)
-#define __PPC_WC(w) ((w & 0x3) << 21)
+#define __PPC_RA(a) (((a) & 0x1f) << 16)
+#define __PPC_RB(b) (((b) & 0x1f) << 11)
+#define __PPC_RS(s) (((s) & 0x1f) << 21)
+#define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
+#define __PPC_T_TLB(t) (((t) & 0x3) << 21)
+#define __PPC_WC(w) (((w) & 0x3) << 21)
/* Deal with instructions that older assemblers aren't aware of */
#define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \
@@ -69,5 +74,17 @@
#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b)
#define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \
__PPC_WC(w))
+#define PPC_TLBIE(lp,a) stringify_in_c(.long PPC_INST_TLBIE | \
+ __PPC_RB(a) | __PPC_RS(lp))
+
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(s, a, b) (__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b))
+#define STXVD2X(s, a, b) stringify_in_c(.long PPC_INST_STXVD2X | \
+ VSX_XX1((s), (a), (b)))
+#define LXVD2X(s, a, b) stringify_in_c(.long PPC_INST_LXVD2X | \
+ VSX_XX1((s), (a), (b)))
#endif /* _ASM_POWERPC_PPC_OPCODE_H */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 384d90c9c272..f9729529c20d 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -76,16 +76,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \
REST_10GPRS(22, base)
#endif
-/*
- * Define what the VSX XX1 form instructions will look like, then add
- * the 128 bit load store instructions based on that.
- */
-#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \
- ((rb) << 11) | (((xs) >> 5)))
-
-#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
-#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
-
#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index c9c678fb2538..8c341490cfc5 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -135,7 +135,9 @@ do { \
* These are defined as per linux/ptrace.h, which see.
*/
#define arch_has_single_step() (1)
+#define arch_has_block_step() (!cpu_has_feature(CPU_FTR_601))
extern void user_enable_single_step(struct task_struct *);
+extern void user_enable_block_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
#endif /* __ASSEMBLY__ */
@@ -288,4 +290,6 @@ extern void user_disable_single_step(struct task_struct *);
#define PPC_PTRACE_PEEKUSR_3264 0x91
#define PPC_PTRACE_POKEUSR_3264 0x90
+#define PTRACE_SINGLEBLOCK 0x100 /* resume execution until next branch */
+
#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 2701753d9937..e0faf332c9c9 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -22,7 +22,7 @@
#include <asm/cpm.h>
#include <asm/immap_qe.h>
-#define QE_NUM_OF_SNUM 28
+#define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */
#define QE_NUM_OF_BRGS 16
#define QE_NUM_OF_PORTS 1024
@@ -152,6 +152,9 @@ unsigned int qe_get_brg_clk(void);
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
+
/* we actually use cpm_muram implementation, define this for convenience */
#define qe_muram_init cpm_muram_init
#define qe_muram_alloc cpm_muram_alloc
@@ -231,12 +234,16 @@ struct qe_bd {
#define QE_ALIGNMENT_OF_PRAM 64
/* RISC allocation */
-enum qe_risc_allocation {
- QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */
- QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */
- QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose
- RISC 1 or RISC 2 */
-};
+#define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \
+ QE_RISC_ALLOCATION_RISC2 | \
+ QE_RISC_ALLOCATION_RISC3 | \
+ QE_RISC_ALLOCATION_RISC4)
/* QE extended filtering Table Lookup Key Size */
enum qe_fltr_tbl_lookup_key_size {
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
index fcf7d55afe45..912bf597870f 100644
--- a/arch/powerpc/include/asm/scatterlist.h
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -21,7 +21,7 @@ struct scatterlist {
unsigned int offset;
unsigned int length;
- /* For TCE support */
+ /* For TCE or SWIOTLB support */
dma_addr_t dma_address;
u32 dma_length;
};
@@ -34,11 +34,7 @@ struct scatterlist {
* is 0.
*/
#define sg_dma_address(sg) ((sg)->dma_address)
-#ifdef __powerpc64__
#define sg_dma_len(sg) ((sg)->dma_length)
-#else
-#define sg_dma_len(sg) ((sg)->length)
-#endif
#ifdef __powerpc64__
#define ISA_DMA_THRESHOLD (~0UL)
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
new file mode 100644
index 000000000000..30891d6e2bc1
--- /dev/null
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_SWIOTLB_H
+#define __ASM_SWIOTLB_H
+
+#include <linux/swiotlb.h>
+
+extern struct dma_mapping_ops swiotlb_dma_ops;
+extern struct dma_mapping_ops swiotlb_pci_dma_ops;
+
+int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t,
+ size_t size);
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+extern unsigned int ppc_swiotlb_enable;
+int __init swiotlb_setup_bus_notifier(void);
+
+#endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index 2b2420a49884..bb8e006a47c6 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -211,7 +211,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
-extern int init_bootmem_done; /* set on !NUMA once bootmem is available */
+extern int init_bootmem_done; /* set once bootmem is available */
extern phys_addr_t memory_limit;
extern unsigned long klimit;
diff --git a/arch/powerpc/include/asm/xilinx_pci.h b/arch/powerpc/include/asm/xilinx_pci.h
new file mode 100644
index 000000000000..7a8275caf6af
--- /dev/null
+++ b/arch/powerpc/include/asm/xilinx_pci.h
@@ -0,0 +1,21 @@
+/*
+ * Xilinx pci external definitions
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef INCLUDE_XILINX_PCI
+#define INCLUDE_XILINX_PCI
+
+#ifdef CONFIG_XILINX_PCI
+extern void __init xilinx_pci_init(void);
+#else
+static inline void __init xilinx_pci_init(void) { return; }
+#endif
+
+#endif /* INCLUDE_XILINX_PCI */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index a2c683403c2b..a7def5f90cad 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
firmware.o nvram_64.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC64) += vdso64/
-obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
+obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
@@ -82,6 +82,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
+obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
@@ -111,6 +112,7 @@ obj-y += ppc_save_regs.o
endif
extra-$(CONFIG_PPC_FPU) += fpu.o
+extra-$(CONFIG_ALTIVEC) += vector.o
extra-$(CONFIG_PPC64) += entry_64.o
extra-y += systbl_chk.i
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 5ffcfaa77d6a..a5b632e52fae 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -24,6 +24,7 @@
#include <asm/system.h>
#include <asm/cache.h>
#include <asm/cputable.h>
+#include <asm/emulated_ops.h>
struct aligninfo {
unsigned char len;
@@ -730,8 +731,10 @@ int fix_alignment(struct pt_regs *regs)
areg = dsisr & 0x1f; /* register to update */
#ifdef CONFIG_SPE
- if ((instr >> 26) == 0x4)
+ if ((instr >> 26) == 0x4) {
+ PPC_WARN_EMULATED(spe);
return emulate_spe(regs, reg, instr);
+ }
#endif
instr = (dsisr >> 10) & 0x7f;
@@ -783,23 +786,28 @@ int fix_alignment(struct pt_regs *regs)
flags |= SPLT;
nb = 8;
}
+ PPC_WARN_EMULATED(vsx);
return emulate_vsx(addr, reg, areg, regs, flags, nb);
}
#endif
/* A size of 0 indicates an instruction we don't support, with
* the exception of DCBZ which is handled as a special case here
*/
- if (instr == DCBZ)
+ if (instr == DCBZ) {
+ PPC_WARN_EMULATED(dcbz);
return emulate_dcbz(regs, addr);
+ }
if (unlikely(nb == 0))
return 0;
/* Load/Store Multiple instructions are handled in their own
* function
*/
- if (flags & M)
+ if (flags & M) {
+ PPC_WARN_EMULATED(multiple);
return emulate_multiple(regs, addr, reg, nb,
flags, instr, swiz);
+ }
/* Verify the address of the operand */
if (unlikely(user_mode(regs) &&
@@ -816,8 +824,12 @@ int fix_alignment(struct pt_regs *regs)
}
/* Special case for 16-byte FP loads and stores */
- if (nb == 16)
+ if (nb == 16) {
+ PPC_WARN_EMULATED(fp_pair);
return emulate_fp_pair(addr, reg, flags);
+ }
+
+ PPC_WARN_EMULATED(unaligned);
/* If we are loading, get the data from user space, else
* get it from register values
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index e981d1ce1914..561b64652311 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -122,8 +122,6 @@ int main(void)
DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
DEFINE(PACACURRENT, offsetof(struct paca_struct, __current));
DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
- DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
- DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
@@ -132,35 +130,30 @@ int main(void)
DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending));
- DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
- DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
- DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
#ifdef CONFIG_PPC_MM_SLICES
DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,
context.low_slices_psize));
DEFINE(PACAHIGHSLICEPSIZE, offsetof(struct paca_struct,
context.high_slices_psize));
DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
+#endif /* CONFIG_PPC_MM_SLICES */
+#ifdef CONFIG_PPC_STD_MMU_64
+ DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
+ DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
+ DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
+ DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
+ DEFINE(PACAVMALLOCSLLP, offsetof(struct paca_struct, vmalloc_sllp));
+#ifdef CONFIG_PPC_MM_SLICES
DEFINE(MMUPSIZESLLP, offsetof(struct mmu_psize_def, sllp));
#else
DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp));
-
#endif /* CONFIG_PPC_MM_SLICES */
DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
- DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
DEFINE(PACALPPACAPTR, offsetof(struct paca_struct, lppaca_ptr));
- DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
- DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
- DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
- DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
- DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(PACA_SLBSHADOWPTR, offsetof(struct paca_struct, slb_shadow_ptr));
- DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
- DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
-
DEFINE(SLBSHADOW_STACKVSID,
offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid));
DEFINE(SLBSHADOW_STACKESID,
@@ -170,6 +163,15 @@ int main(void)
DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
DEFINE(SLBSHADOW_SAVEAREA, offsetof(struct slb_shadow, save_area));
+#endif /* CONFIG_PPC_STD_MMU_64 */
+ DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
+ DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+ DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
+ DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
+ DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
+ DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
+ DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
+ DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
#endif /* CONFIG_PPC64 */
/* RTAS */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 3e33fb933d99..4a24a2fc4574 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -427,7 +427,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER7 (architected)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTR_HPTE_TABLE |
+ MMU_FTR_TLBIE_206,
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
@@ -441,7 +442,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER7 (raw)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTR_HPTE_TABLE |
+ MMU_FTR_TLBIE_206,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
new file mode 100644
index 000000000000..68ccf11e4f19
--- /dev/null
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -0,0 +1,163 @@
+/*
+ * Contains routines needed to support swiotlb for ppc.
+ *
+ * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/pfn.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+
+#include <asm/machdep.h>
+#include <asm/swiotlb.h>
+#include <asm/dma.h>
+#include <asm/abs_addr.h>
+
+int swiotlb __read_mostly;
+unsigned int ppc_swiotlb_enable;
+
+void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr)
+{
+ unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr));
+ void *pageaddr = page_address(pfn_to_page(pfn));
+
+ if (pageaddr != NULL)
+ return pageaddr + (addr % PAGE_SIZE);
+ return NULL;
+}
+
+dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
+{
+ return paddr + get_dma_direct_offset(hwdev);
+}
+
+phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
+
+{
+ return baddr - get_dma_direct_offset(hwdev);
+}
+
+/*
+ * Determine if an address needs bounce buffering via swiotlb.
+ * Going forward I expect the swiotlb code to generalize on using
+ * a dma_ops->addr_needs_map, and this function will move from here to the
+ * generic swiotlb code.
+ */
+int
+swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr,
+ size_t size)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
+
+ BUG_ON(!dma_ops);
+ return dma_ops->addr_needs_map(hwdev, addr, size);
+}
+
+/*
+ * Determine if an address is reachable by a pci device, or if we must bounce.
+ */
+static int
+swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
+{
+ u64 mask = dma_get_mask(hwdev);
+ dma_addr_t max;
+ struct pci_controller *hose;
+ struct pci_dev *pdev = to_pci_dev(hwdev);
+
+ hose = pci_bus_to_host(pdev->bus);
+ max = hose->dma_window_base_cur + hose->dma_window_size;
+
+ /* check that we're within mapped pci window space */
+ if ((addr + size > max) | (addr < hose->dma_window_base_cur))
+ return 1;
+
+ return !is_buffer_dma_capable(mask, addr, size);
+}
+
+static int
+swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
+{
+ return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+}
+
+
+/*
+ * At the moment, all platforms that use this code only require
+ * swiotlb to be used if we're operating on HIGHMEM. Since
+ * we don't ever call anything other than map_sg, unmap_sg,
+ * map_page, and unmap_page on highmem, use normal dma_ops
+ * for everything else.
+ */
+struct dma_mapping_ops swiotlb_dma_ops = {
+ .alloc_coherent = dma_direct_alloc_coherent,
+ .free_coherent = dma_direct_free_coherent,
+ .map_sg = swiotlb_map_sg_attrs,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .dma_supported = swiotlb_dma_supported,
+ .map_page = swiotlb_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .addr_needs_map = swiotlb_addr_needs_map,
+ .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+ .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+struct dma_mapping_ops swiotlb_pci_dma_ops = {
+ .alloc_coherent = dma_direct_alloc_coherent,
+ .free_coherent = dma_direct_free_coherent,
+ .map_sg = swiotlb_map_sg_attrs,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .dma_supported = swiotlb_dma_supported,
+ .map_page = swiotlb_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .addr_needs_map = swiotlb_pci_addr_needs_map,
+ .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
+ .sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = swiotlb_sync_sg_for_device
+};
+
+static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+
+ /* We are only intereted in device addition */
+ if (action != BUS_NOTIFY_ADD_DEVICE)
+ return 0;
+
+ /* May need to bounce if the device can't address all of DRAM */
+ if (dma_get_mask(dev) < lmb_end_of_DRAM())
+ set_dma_ops(dev, &swiotlb_dma_ops);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
+ .notifier_call = ppc_swiotlb_bus_notify,
+ .priority = 0,
+};
+
+static struct notifier_block ppc_swiotlb_of_bus_notifier = {
+ .notifier_call = ppc_swiotlb_bus_notify,
+ .priority = 0,
+};
+
+int __init swiotlb_setup_bus_notifier(void)
+{
+ bus_register_notifier(&platform_bus_type,
+ &ppc_swiotlb_plat_bus_notifier);
+ bus_register_notifier(&of_platform_bus_type,
+ &ppc_swiotlb_of_bus_notifier);
+
+ return 0;
+}
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 6b02793dc75b..20a60d661ba8 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -19,7 +19,7 @@
* default the offset is PCI_DRAM_OFFSET.
*/
-static unsigned long get_dma_direct_offset(struct device *dev)
+unsigned long get_dma_direct_offset(struct device *dev)
{
if (dev)
return (unsigned long)dev->archdata.dma_data;
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
new file mode 100644
index 000000000000..eb898112e577
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -0,0 +1,978 @@
+/*
+ * This file contains the 64-bit "server" PowerPC variant
+ * of the low level exception handling including exception
+ * vectors, exception return, part of the slb and stab
+ * handling and other fixed offset specific things.
+ *
+ * This file is meant to be #included from head_64.S due to
+ * position dependant assembly.
+ *
+ * Most of this originates from head_64.S and thus has the same
+ * copyright history.
+ *
+ */
+
+/*
+ * We layout physical memory as follows:
+ * 0x0000 - 0x00ff : Secondary processor spin code
+ * 0x0100 - 0x2fff : pSeries Interrupt prologs
+ * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x7000 - 0x7fff : FWNMI data area
+ * 0x8000 - : Early init and support code
+ */
+
+
+/*
+ * SPRG Usage
+ *
+ * Register Definition
+ *
+ * SPRG0 reserved for hypervisor
+ * SPRG1 temp - used to save gpr
+ * SPRG2 temp - used to save gpr
+ * SPRG3 virt addr of paca
+ */
+
+/*
+ * This is the start of the interrupt handlers for pSeries
+ * This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
+ */
+ . = 0x100
+ .globl __start_interrupts
+__start_interrupts:
+
+ STD_EXCEPTION_PSERIES(0x100, system_reset)
+
+ . = 0x200
+_machine_check_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+ . = 0x300
+ .globl data_access_pSeries
+data_access_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13
+BEGIN_FTR_SECTION
+ mtspr SPRN_SPRG2,r12
+ mfspr r13,SPRN_DAR
+ mfspr r12,SPRN_DSISR
+ srdi r13,r13,60
+ rlwimi r13,r12,16,0x20
+ mfcr r12
+ cmpwi r13,0x2c
+ beq do_stab_bolted_pSeries
+ mtcrf 0x80,r12
+ mfspr r12,SPRN_SPRG2
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+
+ . = 0x380
+ .globl data_access_slb_pSeries
+data_access_slb_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13
+ mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_DAR
+ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ mfcr r9
+#ifdef __DISABLED__
+ /* Keep that around for when we re-implement dynamic VSIDs */
+ cmpdi r3,0
+ bge slb_miss_user_pseries
+#endif /* __DISABLED__ */
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ /*
+ * We can't just use a direct branch to .slb_miss_realmode
+ * because the distance from here to there depends on where
+ * the kernel ends up being put.
+ */
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ STD_EXCEPTION_PSERIES(0x400, instruction_access)
+
+ . = 0x480
+ .globl instruction_access_slb_pSeries
+instruction_access_slb_pSeries:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13
+ mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
+ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ mfcr r9
+#ifdef __DISABLED__
+ /* Keep that around for when we re-implement dynamic VSIDs */
+ cmpdi r3,0
+ bge slb_miss_user_pseries
+#endif /* __DISABLED__ */
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ mfspr r10,SPRN_SPRG1
+ std r10,PACA_EXSLB+EX_R13(r13)
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+#ifndef CONFIG_RELOCATABLE
+ b .slb_miss_realmode
+#else
+ mfctr r11
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10, .slb_miss_realmode)
+ mtctr r10
+ bctr
+#endif
+
+ MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
+ STD_EXCEPTION_PSERIES(0x600, alignment)
+ STD_EXCEPTION_PSERIES(0x700, program_check)
+ STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
+ MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
+ STD_EXCEPTION_PSERIES(0xa00, trap_0a)
+ STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+
+ . = 0xc00
+ .globl system_call_pSeries
+system_call_pSeries:
+ HMT_MEDIUM
+BEGIN_FTR_SECTION
+ cmpdi r0,0x1ebe
+ beq- 1f
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
+ mr r9,r13
+ mfspr r13,SPRN_SPRG3
+ mfspr r11,SPRN_SRR0
+ ld r12,PACAKBASE(r13)
+ ld r10,PACAKMSR(r13)
+ LOAD_HANDLER(r12, system_call_entry)
+ mtspr SPRN_SRR0,r12
+ mfspr r12,SPRN_SRR1
+ mtspr SPRN_SRR1,r10
+ rfid
+ b . /* prevent speculative execution */
+
+/* Fast LE/BE switch system call */
+1: mfspr r12,SPRN_SRR1
+ xori r12,r12,MSR_LE
+ mtspr SPRN_SRR1,r12
+ rfid /* return to userspace */
+ b .
+
+ STD_EXCEPTION_PSERIES(0xd00, single_step)
+ STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+
+ /* We need to deal with the Altivec unavailable exception
+ * here which is at 0xf20, thus in the middle of the
+ * prolog code of the PerformanceMonitor one. A little
+ * trickery is thus necessary
+ */
+ . = 0xf00
+ b performance_monitor_pSeries
+
+ . = 0xf20
+ b altivec_unavailable_pSeries
+
+ . = 0xf40
+ b vsx_unavailable_pSeries
+
+#ifdef CONFIG_CBE_RAS
+ HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
+#endif /* CONFIG_CBE_RAS */
+ STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+#ifdef CONFIG_CBE_RAS
+ HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
+#endif /* CONFIG_CBE_RAS */
+ STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+#ifdef CONFIG_CBE_RAS
+ HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
+#endif /* CONFIG_CBE_RAS */
+
+ . = 0x3000
+
+/*** pSeries interrupt support ***/
+
+ /* moved from 0xf00 */
+ STD_EXCEPTION_PSERIES(., performance_monitor)
+ STD_EXCEPTION_PSERIES(., altivec_unavailable)
+ STD_EXCEPTION_PSERIES(., vsx_unavailable)
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt:
+ stb r10,PACAHARDIRQEN(r13)
+ mtcrf 0x80,r9
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ mfspr r10,SPRN_SRR1
+ rldicl r10,r10,48,1 /* clear MSR_EE */
+ rotldi r10,r10,16
+ mtspr SPRN_SRR1,r10
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ mfspr r13,SPRN_SPRG1
+ rfid
+ b .
+
+ .align 7
+do_stab_bolted_pSeries:
+ mtcrf 0x80,r12
+ mfspr r12,SPRN_SPRG2
+ EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Vectors for the FWNMI option. Share common code.
+ */
+ .globl system_reset_fwnmi
+ .align 7
+system_reset_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+
+ .globl machine_check_fwnmi
+ .align 7
+machine_check_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRN_SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+#endif /* CONFIG_PPC_PSERIES */
+
+#ifdef __DISABLED__
+/*
+ * This is used for when the SLB miss handler has to go virtual,
+ * which doesn't happen for now anymore but will once we re-implement
+ * dynamic VSIDs for shared page tables
+ */
+slb_miss_user_pseries:
+ std r10,PACA_EXGEN+EX_R10(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfspr r10,SPRG1
+ ld r11,PACA_EXSLB+EX_R9(r13)
+ ld r12,PACA_EXSLB+EX_R3(r13)
+ std r10,PACA_EXGEN+EX_R13(r13)
+ std r11,PACA_EXGEN+EX_R9(r13)
+ std r12,PACA_EXGEN+EX_R3(r13)
+ clrrdi r12,r13,32
+ mfmsr r10
+ mfspr r11,SRR0 /* save SRR0 */
+ ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
+ ori r10,r10,MSR_IR|MSR_DR|MSR_RI
+ mtspr SRR0,r12
+ mfspr r12,SRR1 /* and SRR1 */
+ mtspr SRR1,r10
+ rfid
+ b . /* prevent spec. execution */
+#endif /* __DISABLED__ */
+
+ .align 7
+ .globl __end_interrupts
+__end_interrupts:
+
+/*
+ * Code from here down to __end_handlers is invoked from the
+ * exception prologs above. Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an addi instruction, these handlers must be in
+ * the first 32k of the kernel image.
+ */
+
+/*** Common interrupt handlers ***/
+
+ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+
+ /*
+ * Machine check is different because we use a different
+ * save area: PACA_EXMC instead of PACA_EXGEN.
+ */
+ .align 7
+ .globl machine_check_common
+machine_check_common:
+ EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+ FINISH_NAP
+ DISABLE_INTS
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .machine_check_exception
+ b .ret_from_except
+
+ STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
+ STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
+ STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+ STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
+ STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
+#ifdef CONFIG_ALTIVEC
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+#else
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+#endif
+#ifdef CONFIG_CBE_RAS
+ STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
+ STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
+ STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
+#endif /* CONFIG_CBE_RAS */
+
+ .align 7
+system_call_entry:
+ b system_call_common
+
+/*
+ * Here we have detected that the kernel stack pointer is bad.
+ * R9 contains the saved CR, r13 points to the paca,
+ * r10 contains the (bad) kernel stack pointer,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * We switch to using an emergency stack, save the registers there,
+ * and call kernel_bad_stack(), which panics.
+ */
+bad_stack:
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,64+INT_FRAME_SIZE
+ std r9,_CCR(r1)
+ std r10,GPR1(r1)
+ std r11,_NIP(r1)
+ std r12,_MSR(r1)
+ mfspr r11,SPRN_DAR
+ mfspr r12,SPRN_DSISR
+ std r11,_DAR(r1)
+ std r12,_DSISR(r1)
+ mflr r10
+ mfctr r11
+ mfxer r12
+ std r10,_LINK(r1)
+ std r11,_CTR(r1)
+ std r12,_XER(r1)
+ SAVE_GPR(0,r1)
+ SAVE_GPR(2,r1)
+ SAVE_4GPRS(3,r1)
+ SAVE_2GPRS(7,r1)
+ SAVE_10GPRS(12,r1)
+ SAVE_10GPRS(22,r1)
+ lhz r12,PACA_TRAP_SAVE(r13)
+ std r12,_TRAP(r1)
+ addi r11,r1,INT_FRAME_SIZE
+ std r11,0(r1)
+ li r12,0
+ std r12,0(r11)
+ ld r2,PACATOC(r13)
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .kernel_bad_stack
+ b 1b
+
+/*
+ * Here r13 points to the paca, r9 contains the saved CR,
+ * SRR0 and SRR1 are saved in r11 and r12,
+ * r9 - r13 are saved in paca->exgen.
+ */
+ .align 7
+ .globl data_access_common
+data_access_common:
+ mfspr r10,SPRN_DAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,SPRN_DSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
+ ld r3,PACA_EXGEN+EX_DAR(r13)
+ lwz r4,PACA_EXGEN+EX_DSISR(r13)
+ li r5,0x300
+ b .do_hash_page /* Try to handle as hpte fault */
+
+ .align 7
+ .globl instruction_access_common
+instruction_access_common:
+ EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
+ ld r3,_NIP(r1)
+ andis. r4,r12,0x5820
+ li r5,0x400
+ b .do_hash_page /* Try to handle as hpte fault */
+
+/*
+ * Here is the common SLB miss user that is used when going to virtual
+ * mode for SLB misses, that is currently not used
+ */
+#ifdef __DISABLED__
+ .align 7
+ .globl slb_miss_user_common
+slb_miss_user_common:
+ mflr r10
+ std r3,PACA_EXGEN+EX_DAR(r13)
+ stw r9,PACA_EXGEN+EX_CCR(r13)
+ std r10,PACA_EXGEN+EX_LR(r13)
+ std r11,PACA_EXGEN+EX_SRR0(r13)
+ bl .slb_allocate_user
+
+ ld r10,PACA_EXGEN+EX_LR(r13)
+ ld r3,PACA_EXGEN+EX_R3(r13)
+ lwz r9,PACA_EXGEN+EX_CCR(r13)
+ ld r11,PACA_EXGEN+EX_SRR0(r13)
+ mtlr r10
+ beq- slb_miss_fault
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- unrecov_user_slb
+ mfmsr r10
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+.machine pop
+
+ clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
+ mtmsrd r10,1
+
+ mtspr SRR0,r11
+ mtspr SRR1,r12
+
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ rfid
+ b .
+
+slb_miss_fault:
+ EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
+ ld r4,PACA_EXGEN+EX_DAR(r13)
+ li r5,0
+ std r4,_DAR(r1)
+ std r5,_DSISR(r1)
+ b handle_page_fault
+
+unrecov_user_slb:
+ EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+#endif /* __DISABLED__ */
+
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ ld r11,PACALPPACAPTR(r13)
+ ld r11,LPPACASRR0(r11) /* get SRR0 value */
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- 2f
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ mtspr SPRN_SRR0,r11
+ mtspr SPRN_SRR1,r12
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+2:
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ b unrecov_slb
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+ mfspr r11,SPRN_SRR0
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+ .align 7
+ .globl hardware_interrupt_common
+ .globl hardware_interrupt_entry
+hardware_interrupt_common:
+ EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+ FINISH_NAP
+hardware_interrupt_entry:
+ DISABLE_INTS
+BEGIN_FTR_SECTION
+ bl .ppc64_runlatch_on
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_IRQ
+ b .ret_from_except_lite
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
+ .align 7
+ .globl alignment_common
+alignment_common:
+ mfspr r10,SPRN_DAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,SPRN_DSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
+ ld r3,PACA_EXGEN+EX_DAR(r13)
+ lwz r4,PACA_EXGEN+EX_DSISR(r13)
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .alignment_exception
+ b .ret_from_except
+
+ .align 7
+ .globl program_check_common
+program_check_common:
+ EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .program_check_exception
+ b .ret_from_except
+
+ .align 7
+ .globl fp_unavailable_common
+fp_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
+ bne 1f /* if from user, just load it up */
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .kernel_fp_unavailable_exception
+ BUG_OPCODE
+1: bl .load_up_fpu
+ b fast_exception_return
+
+ .align 7
+ .globl altivec_unavailable_common
+altivec_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+ beq 1f
+ bl .load_up_altivec
+ b fast_exception_return
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .altivec_unavailable_exception
+ b .ret_from_except
+
+ .align 7
+ .globl vsx_unavailable_common
+vsx_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ bne .load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .vsx_unavailable_exception
+ b .ret_from_except
+
+ .align 7
+ .globl __end_handlers
+__end_handlers:
+
+/*
+ * Return from an exception with minimal checks.
+ * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
+ * If interrupts have been enabled, or anything has been
+ * done that might have changed the scheduling status of
+ * any task or sent any task a signal, you should use
+ * ret_from_except or ret_from_except_lite instead of this.
+ */
+fast_exc_return_irq: /* restores irq state too */
+ ld r3,SOFTE(r1)
+ TRACE_AND_RESTORE_IRQ(r3);
+ ld r12,_MSR(r1)
+ rldicl r4,r12,49,63 /* get MSR_EE to LSB */
+ stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
+ b 1f
+
+ .globl fast_exception_return
+fast_exception_return:
+ ld r12,_MSR(r1)
+1: ld r11,_NIP(r1)
+ andi. r3,r12,MSR_RI /* check if RI is set */
+ beq- unrecov_fer
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ andi. r3,r12,MSR_PR
+ beq 2f
+ ACCOUNT_CPU_USER_EXIT(r3, r4)
+2:
+#endif
+
+ ld r3,_CCR(r1)
+ ld r4,_LINK(r1)
+ ld r5,_CTR(r1)
+ ld r6,_XER(r1)
+ mtcr r3
+ mtlr r4
+ mtctr r5
+ mtxer r6
+ REST_GPR(0, r1)
+ REST_8GPRS(2, r1)
+
+ mfmsr r10
+ rldicl r10,r10,48,1 /* clear EE */
+ rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
+ mtmsrd r10,1
+
+ mtspr SPRN_SRR1,r12
+ mtspr SPRN_SRR0,r11
+ REST_4GPRS(10, r1)
+ ld r1,GPR1(r1)
+ rfid
+ b . /* prevent speculative execution */
+
+unrecov_fer:
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+
+/*
+ * Hash table stuff
+ */
+ .align 7
+_STATIC(do_hash_page)
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+
+ andis. r0,r4,0xa450 /* weird error? */
+ bne- handle_page_fault /* if not, try to insert a HPTE */
+BEGIN_FTR_SECTION
+ andis. r0,r4,0x0020 /* Is it a segment table fault? */
+ bne- do_ste_alloc /* If so handle it */
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+
+ /*
+ * On iSeries, we soft-disable interrupts here, then
+ * hard-enable interrupts so that the hash_page code can spin on
+ * the hash_table_lock without problems on a shared processor.
+ */
+ DISABLE_INTS
+
+ /*
+ * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
+ * and will clobber volatile registers when irq tracing is enabled
+ * so we need to reload them. It may be possible to be smarter here
+ * and move the irq tracing elsewhere but let's keep it simple for
+ * now
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ ld r3,_DAR(r1)
+ ld r4,_DSISR(r1)
+ ld r5,_TRAP(r1)
+ ld r12,_MSR(r1)
+ clrrdi r5,r5,4
+#endif /* CONFIG_TRACE_IRQFLAGS */
+ /*
+ * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
+ * accessing a userspace segment (even from the kernel). We assume
+ * kernel addresses always have the high bit set.
+ */
+ rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
+ rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
+ orc r0,r12,r0 /* MSR_PR | ~high_bit */
+ rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
+ ori r4,r4,1 /* add _PAGE_PRESENT */
+ rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
+
+ /*
+ * r3 contains the faulting address
+ * r4 contains the required access permissions
+ * r5 contains the trap number
+ *
+ * at return r3 = 0 for success
+ */
+ bl .hash_page /* build HPTE if possible */
+ cmpdi r3,0 /* see if hash_page succeeded */
+
+BEGIN_FW_FTR_SECTION
+ /*
+ * If we had interrupts soft-enabled at the point where the
+ * DSI/ISI occurred, and an interrupt came in during hash_page,
+ * handle it now.
+ * We jump to ret_from_except_lite rather than fast_exception_return
+ * because ret_from_except_lite will check for and handle pending
+ * interrupts if necessary.
+ */
+ beq 13f
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+
+BEGIN_FW_FTR_SECTION
+ /*
+ * Here we have interrupts hard-disabled, so it is sufficient
+ * to restore paca->{soft,hard}_enable and get out.
+ */
+ beq fast_exc_return_irq /* Return from exception on success */
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+
+ /* For a hash failure, we don't bother re-enabling interrupts */
+ ble- 12f
+
+ /*
+ * hash_page couldn't handle it, set soft interrupt enable back
+ * to what it was before the trap. Note that .raw_local_irq_restore
+ * handles any interrupts pending at this point.
+ */
+ ld r3,SOFTE(r1)
+ TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
+ bl .raw_local_irq_restore
+ b 11f
+
+/* Here we have a page fault that hash_page can't handle. */
+handle_page_fault:
+ ENABLE_INTS
+11: ld r4,_DAR(r1)
+ ld r5,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_page_fault
+ cmpdi r3,0
+ beq+ 13f
+ bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ lwz r4,_DAR(r1)
+ bl .bad_page_fault
+ b .ret_from_except
+
+13: b .ret_from_except_lite
+
+/* We have a page fault that hash_page could handle but HV refused
+ * the PTE insertion
+ */
+12: bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ld r4,_DAR(r1)
+ bl .low_hash_fault
+ b .ret_from_except
+
+ /* here we have a segment miss */
+do_ste_alloc:
+ bl .ste_allocate /* try to insert stab entry */
+ cmpdi r3,0
+ bne- handle_page_fault
+ b fast_exception_return
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * r9 - r13 are saved in paca->exslb.
+ * We assume we aren't going to take any exceptions during this procedure.
+ * We assume (DAR >> 60) == 0xc.
+ */
+ .align 7
+_GLOBAL(do_stab_bolted)
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+
+ /* Hash to the primary group */
+ ld r10,PACASTABVIRT(r13)
+ mfspr r11,SPRN_DAR
+ srdi r11,r11,28
+ rldimi r10,r11,7,52 /* r10 = first ste of the group */
+
+ /* Calculate VSID */
+ /* This is a kernel address, so protovsid = ESID */
+ ASM_VSID_SCRAMBLE(r11, r9, 256M)
+ rldic r9,r11,12,16 /* r9 = vsid << 12 */
+
+ /* Search the primary group for a free entry */
+1: ld r11,0(r10) /* Test valid bit of the current ste */
+ andi. r11,r11,0x80
+ beq 2f
+ addi r10,r10,16
+ andi. r11,r10,0x70
+ bne 1b
+
+ /* Stick for only searching the primary group for now. */
+ /* At least for now, we use a very simple random castout scheme */
+ /* Use the TB as a random number ; OR in 1 to avoid entry 0 */
+ mftb r11
+ rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
+ ori r11,r11,0x10
+
+ /* r10 currently points to an ste one past the group of interest */
+ /* make it point to the randomly selected entry */
+ subi r10,r10,128
+ or r10,r10,r11 /* r10 is the entry to invalidate */
+
+ isync /* mark the entry invalid */
+ ld r11,0(r10)
+ rldicl r11,r11,56,1 /* clear the valid bit */
+ rotldi r11,r11,8
+ std r11,0(r10)
+ sync
+
+ clrrdi r11,r11,28 /* Get the esid part of the ste */
+ slbie r11
+
+2: std r9,8(r10) /* Store the vsid part of the ste */
+ eieio
+
+ mfspr r11,SPRN_DAR /* Get the new esid */
+ clrrdi r11,r11,28 /* Permits a full 32b of ESID */
+ ori r11,r11,0x90 /* Turn on valid and kp */
+ std r11,0(r10) /* Put new entry back into the stab */
+
+ sync
+
+ /* All done -- return from exception. */
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+ ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
+
+ andi. r10,r12,MSR_RI
+ beq- unrecov_slb
+
+ mtcrf 0x80,r9 /* restore CR */
+
+ mfmsr r10
+ clrrdi r10,r10,2
+ mtmsrd r10,1
+
+ mtspr SPRN_SRR0,r11
+ mtspr SPRN_SRR1,r12
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on). The address is given to the hv
+ * as a page number (see xLparMap below), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+ . = STAB0_OFFSET /* 0x6000 */
+ .globl initial_stab
+initial_stab:
+ .space 4096
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ */
+ .= 0x7000
+ .globl fwnmi_data_area
+fwnmi_data_area:
+#endif /* CONFIG_PPC_PSERIES */
+
+ /* iSeries does not use the FWNMI stuff, so it is safe to put
+ * this here, even if we later allow kernels that will boot on
+ * both pSeries and iSeries */
+#ifdef CONFIG_PPC_ISERIES
+ . = LPARMAP_PHYS
+ .globl xLparMap
+xLparMap:
+ .quad HvEsidsToMap /* xNumberEsids */
+ .quad HvRangesToMap /* xNumberRanges */
+ .quad STAB0_PAGE /* xSegmentTableOffs */
+ .zero 40 /* xRsvd */
+ /* xEsids (HvEsidsToMap entries of 2 quads) */
+ .quad PAGE_OFFSET_ESID /* xKernelEsid */
+ .quad PAGE_OFFSET_VSID /* xKernelVsid */
+ .quad VMALLOC_START_ESID /* xKernelEsid */
+ .quad VMALLOC_START_VSID /* xKernelVsid */
+ /* xRanges (HvRangesToMap entries of 3 quads) */
+ .quad HvPagesToMap /* xPages */
+ .quad 0 /* xOffset */
+ .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */
+
+#endif /* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_PPC_PSERIES
+ . = 0x8000
+#endif /* CONFIG_PPC_PSERIES */
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 2d182f119d1d..1b12696cca06 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -23,25 +23,14 @@
#include <asm/code-patching.h>
#include <asm/ftrace.h>
-#ifdef CONFIG_PPC32
-# define GET_ADDR(addr) addr
-#else
-/* PowerPC64's functions are data that points to the functions */
-# define GET_ADDR(addr) (*(unsigned long *)addr)
-#endif
#ifdef CONFIG_DYNAMIC_FTRACE
-static unsigned int ftrace_nop_replace(void)
-{
- return PPC_INST_NOP;
-}
-
static unsigned int
ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
{
unsigned int op;
- addr = GET_ADDR(addr);
+ addr = ppc_function_entry((void *)addr);
/* if (link) set op to 'bl' else 'b' */
op = create_branch((unsigned int *)ip, addr, link ? 1 : 0);
@@ -49,14 +38,6 @@ ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
return op;
}
-#ifdef CONFIG_PPC64
-# define _ASM_ALIGN " .align 3 "
-# define _ASM_PTR " .llong "
-#else
-# define _ASM_ALIGN " .align 2 "
-# define _ASM_PTR " .long "
-#endif
-
static int
ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new)
{
@@ -197,7 +178,7 @@ __ftrace_make_nop(struct module *mod,
ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
/* This should match what was called */
- if (ptr != GET_ADDR(addr)) {
+ if (ptr != ppc_function_entry((void *)addr)) {
printk(KERN_ERR "addr does not match %lx\n", ptr);
return -EINVAL;
}
@@ -328,7 +309,7 @@ int ftrace_make_nop(struct module *mod,
if (test_24bit_addr(ip, addr)) {
/* within range */
old = ftrace_call_replace(ip, addr, 1);
- new = ftrace_nop_replace();
+ new = PPC_INST_NOP;
return ftrace_modify_code(ip, old, new);
}
@@ -466,7 +447,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
*/
if (test_24bit_addr(ip, addr)) {
/* within range */
- old = ftrace_nop_replace();
+ old = PPC_INST_NOP;
new = ftrace_call_replace(ip, addr, 1);
return ftrace_modify_code(ip, old, new);
}
@@ -570,7 +551,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
return_hooker = (unsigned long)&mod_return_to_handler;
#endif
- return_hooker = GET_ADDR(return_hooker);
+ return_hooker = ppc_function_entry((void *)return_hooker);
/*
* Protect against fault, even if it shouldn't
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index c01467f952d3..48469463f89e 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -733,9 +733,11 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
AltiVecUnavailable:
EXCEPTION_PROLOG
#ifdef CONFIG_ALTIVEC
- bne load_up_altivec /* if from user, just load it up */
+ beq 1f
+ bl load_up_altivec /* if from user, just load it up */
+ b fast_exception_return
#endif /* CONFIG_ALTIVEC */
- addi r3,r1,STACK_FRAME_OVERHEAD
+1: addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
PerformanceMonitor:
@@ -743,101 +745,6 @@ PerformanceMonitor:
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_STD(0xf00, performance_monitor_exception)
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support. Changes to one are likely to be applicable to the
- * other! */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch. -- Kumar
- */
- mfmsr r5
- oris r5,r5,MSR_VEC@h
- MTMSRD(r5) /* enable use of AltiVec now */
- isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
- tophys(r6,0)
- addis r3,r6,last_task_used_altivec@ha
- lwz r4,last_task_used_altivec@l(r3)
- cmpwi 0,r4,0
- beq 1f
- add r4,r4,r6
- addi r4,r4,THREAD /* want THREAD of last_task_used_altivec */
- SAVE_32VRS(0,r10,r4)
- mfvscr vr0
- li r10,THREAD_VSCR
- stvx vr0,r10,r4
- lwz r5,PT_REGS(r4)
- add r5,r5,r6
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r10,MSR_VEC@h
- andc r4,r4,r10 /* disable altivec for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* enable use of AltiVec after return */
- oris r9,r9,MSR_VEC@h
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
- li r4,1
- li r10,THREAD_VSCR
- stw r4,THREAD_USED_VR(r5)
- lvx vr0,r10,r5
- mtvscr vr0
- REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
- subi r4,r5,THREAD
- sub r4,r4,r6
- stw r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- /* we haven't used ctr or xer or lr */
- b fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
- .globl giveup_altivec
-giveup_altivec:
- mfmsr r5
- oris r5,r5,MSR_VEC@h
- SYNC
- MTMSRD(r5) /* enable use of AltiVec now */
- isync
- cmpwi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- lwz r5,PT_REGS(r3)
- cmpwi 0,r5,0
- SAVE_32VRS(0, r4, r3)
- mfvscr vr0
- li r4,THREAD_VSCR
- stvx vr0,r4,r3
- beq 1f
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r3,MSR_VEC@h
- andc r4,r4,r3 /* disable AltiVec for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- lis r4,last_task_used_altivec@ha
- stw r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
- blr
-#endif /* CONFIG_ALTIVEC */
/*
* This code is jumped to from the startup code to copy
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 50ef505b8fb6..012505ebd9f9 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -12,8 +12,9 @@
* Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
*
- * This file contains the low-level support and setup for the
- * PowerPC-64 platform, including trap and interrupt dispatch.
+ * This file contains the entry point for the 64-bit kernel along
+ * with some early initialization code common to all 64-bit powerpc
+ * variants.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -38,36 +39,25 @@
#include <asm/exception.h>
#include <asm/irqflags.h>
-/*
- * We layout physical memory as follows:
- * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
- * 0x6000 - 0x6fff : Initial (CPU0) segment table
- * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - : Early init and support code
- */
-
-/*
- * SPRG Usage
- *
- * Register Definition
- *
- * SPRG0 reserved for hypervisor
- * SPRG1 temp - used to save gpr
- * SPRG2 temp - used to save gpr
- * SPRG3 virt addr of paca
+/* The physical memory is layed out such that the secondary processor
+ * spin code sits at 0x0000...0x00ff. On server, the vectors follow
+ * using the layout described in exceptions-64s.S
*/
/*
* Entering into this code we make the following assumptions:
- * For pSeries:
+ *
+ * For pSeries or server processors:
* 1. The MMU is off & open firmware is running in real mode.
* 2. The kernel is entered at __start
*
* For iSeries:
* 1. The MMU is on (as it always is for iSeries)
* 2. The kernel is entered at system_reset_iSeries
+ *
+ * For Book3E processors:
+ * 1. The MMU is on running in AS0 in a state defined in ePAPR
+ * 2. The kernel is entered at __start
*/
.text
@@ -166,1065 +156,14 @@ exception_marker:
.text
/*
- * This is the start of the interrupt handlers for pSeries
- * This code runs with relocation off.
- * Code from here to __end_interrupts gets copied down to real
- * address 0x100 when we are running a relocatable kernel.
- * Therefore any relative branches in this section must only
- * branch to labels in this section.
- */
- . = 0x100
- .globl __start_interrupts
-__start_interrupts:
-
- STD_EXCEPTION_PSERIES(0x100, system_reset)
-
- . = 0x200
-_machine_check_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
- . = 0x300
- .globl data_access_pSeries
-data_access_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
-BEGIN_FTR_SECTION
- mtspr SPRN_SPRG2,r12
- mfspr r13,SPRN_DAR
- mfspr r12,SPRN_DSISR
- srdi r13,r13,60
- rlwimi r13,r12,16,0x20
- mfcr r12
- cmpwi r13,0x2c
- beq do_stab_bolted_pSeries
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
-
- . = 0x380
- .globl data_access_slb_pSeries
-data_access_slb_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r3,SPRN_DAR
- std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
- mfcr r9
-#ifdef __DISABLED__
- /* Keep that around for when we re-implement dynamic VSIDs */
- cmpdi r3,0
- bge slb_miss_user_pseries
-#endif /* __DISABLED__ */
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- mfspr r12,SPRN_SRR1 /* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
-#else
- /*
- * We can't just use a direct branch to .slb_miss_realmode
- * because the distance from here to there depends on where
- * the kernel ends up being put.
- */
- mfctr r11
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
- mtctr r10
- bctr
-#endif
-
- STD_EXCEPTION_PSERIES(0x400, instruction_access)
-
- . = 0x480
- .globl instruction_access_slb_pSeries
-instruction_access_slb_pSeries:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13
- mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
- std r3,PACA_EXSLB+EX_R3(r13)
- mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
- std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
- mfcr r9
-#ifdef __DISABLED__
- /* Keep that around for when we re-implement dynamic VSIDs */
- cmpdi r3,0
- bge slb_miss_user_pseries
-#endif /* __DISABLED__ */
- std r10,PACA_EXSLB+EX_R10(r13)
- std r11,PACA_EXSLB+EX_R11(r13)
- std r12,PACA_EXSLB+EX_R12(r13)
- mfspr r10,SPRN_SPRG1
- std r10,PACA_EXSLB+EX_R13(r13)
- mfspr r12,SPRN_SRR1 /* and SRR1 */
-#ifndef CONFIG_RELOCATABLE
- b .slb_miss_realmode
-#else
- mfctr r11
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10, .slb_miss_realmode)
- mtctr r10
- bctr
-#endif
-
- MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
- STD_EXCEPTION_PSERIES(0x600, alignment)
- STD_EXCEPTION_PSERIES(0x700, program_check)
- STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
- MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
- STD_EXCEPTION_PSERIES(0xa00, trap_0a)
- STD_EXCEPTION_PSERIES(0xb00, trap_0b)
-
- . = 0xc00
- .globl system_call_pSeries
-system_call_pSeries:
- HMT_MEDIUM
-BEGIN_FTR_SECTION
- cmpdi r0,0x1ebe
- beq- 1f
-END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
- mr r9,r13
- mfspr r13,SPRN_SPRG3
- mfspr r11,SPRN_SRR0
- ld r12,PACAKBASE(r13)
- ld r10,PACAKMSR(r13)
- LOAD_HANDLER(r12, system_call_entry)
- mtspr SPRN_SRR0,r12
- mfspr r12,SPRN_SRR1
- mtspr SPRN_SRR1,r10
- rfid
- b . /* prevent speculative execution */
-
-/* Fast LE/BE switch system call */
-1: mfspr r12,SPRN_SRR1
- xori r12,r12,MSR_LE
- mtspr SPRN_SRR1,r12
- rfid /* return to userspace */
- b .
-
- STD_EXCEPTION_PSERIES(0xd00, single_step)
- STD_EXCEPTION_PSERIES(0xe00, trap_0e)
-
- /* We need to deal with the Altivec unavailable exception
- * here which is at 0xf20, thus in the middle of the
- * prolog code of the PerformanceMonitor one. A little
- * trickery is thus necessary
- */
- . = 0xf00
- b performance_monitor_pSeries
-
- . = 0xf20
- b altivec_unavailable_pSeries
-
- . = 0xf40
- b vsx_unavailable_pSeries
-
-#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
-#endif /* CONFIG_CBE_RAS */
- STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
-#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
-#endif /* CONFIG_CBE_RAS */
- STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
-#ifdef CONFIG_CBE_RAS
- HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
-#endif /* CONFIG_CBE_RAS */
-
- . = 0x3000
-
-/*** pSeries interrupt support ***/
-
- /* moved from 0xf00 */
- STD_EXCEPTION_PSERIES(., performance_monitor)
- STD_EXCEPTION_PSERIES(., altivec_unavailable)
- STD_EXCEPTION_PSERIES(., vsx_unavailable)
-
-/*
- * An interrupt came in while soft-disabled; clear EE in SRR1,
- * clear paca->hard_enabled and return.
- */
-masked_interrupt:
- stb r10,PACAHARDIRQEN(r13)
- mtcrf 0x80,r9
- ld r9,PACA_EXGEN+EX_R9(r13)
- mfspr r10,SPRN_SRR1
- rldicl r10,r10,48,1 /* clear MSR_EE */
- rotldi r10,r10,16
- mtspr SPRN_SRR1,r10
- ld r10,PACA_EXGEN+EX_R10(r13)
- mfspr r13,SPRN_SPRG1
- rfid
- b .
-
- .align 7
-do_stab_bolted_pSeries:
- mtcrf 0x80,r12
- mfspr r12,SPRN_SPRG2
- EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Vectors for the FWNMI option. Share common code.
- */
- .globl system_reset_fwnmi
- .align 7
-system_reset_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
-
- .globl machine_check_fwnmi
- .align 7
-machine_check_fwnmi:
- HMT_MEDIUM
- mtspr SPRN_SPRG1,r13 /* save r13 */
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
-#endif /* CONFIG_PPC_PSERIES */
-
-#ifdef __DISABLED__
-/*
- * This is used for when the SLB miss handler has to go virtual,
- * which doesn't happen for now anymore but will once we re-implement
- * dynamic VSIDs for shared page tables
- */
-slb_miss_user_pseries:
- std r10,PACA_EXGEN+EX_R10(r13)
- std r11,PACA_EXGEN+EX_R11(r13)
- std r12,PACA_EXGEN+EX_R12(r13)
- mfspr r10,SPRG1
- ld r11,PACA_EXSLB+EX_R9(r13)
- ld r12,PACA_EXSLB+EX_R3(r13)
- std r10,PACA_EXGEN+EX_R13(r13)
- std r11,PACA_EXGEN+EX_R9(r13)
- std r12,PACA_EXGEN+EX_R3(r13)
- clrrdi r12,r13,32
- mfmsr r10
- mfspr r11,SRR0 /* save SRR0 */
- ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
- ori r10,r10,MSR_IR|MSR_DR|MSR_RI
- mtspr SRR0,r12
- mfspr r12,SRR1 /* and SRR1 */
- mtspr SRR1,r10
- rfid
- b . /* prevent spec. execution */
-#endif /* __DISABLED__ */
-
- .align 7
- .globl __end_interrupts
-__end_interrupts:
-
-/*
- * Code from here down to __end_handlers is invoked from the
- * exception prologs above. Because the prologs assemble the
- * addresses of these handlers using the LOAD_HANDLER macro,
- * which uses an addi instruction, these handlers must be in
- * the first 32k of the kernel image.
- */
-
-/*** Common interrupt handlers ***/
-
- STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
-
- /*
- * Machine check is different because we use a different
- * save area: PACA_EXMC instead of PACA_EXGEN.
- */
- .align 7
- .globl machine_check_common
-machine_check_common:
- EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
- FINISH_NAP
- DISABLE_INTS
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .machine_check_exception
- b .ret_from_except
-
- STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
- STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
- STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
- STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
- STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
- STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
-#ifdef CONFIG_ALTIVEC
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
-#else
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
-#endif
-#ifdef CONFIG_CBE_RAS
- STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
- STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
- STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
-#endif /* CONFIG_CBE_RAS */
-
- .align 7
-system_call_entry:
- b system_call_common
-
-/*
- * Here we have detected that the kernel stack pointer is bad.
- * R9 contains the saved CR, r13 points to the paca,
- * r10 contains the (bad) kernel stack pointer,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * We switch to using an emergency stack, save the registers there,
- * and call kernel_bad_stack(), which panics.
- */
-bad_stack:
- ld r1,PACAEMERGSP(r13)
- subi r1,r1,64+INT_FRAME_SIZE
- std r9,_CCR(r1)
- std r10,GPR1(r1)
- std r11,_NIP(r1)
- std r12,_MSR(r1)
- mfspr r11,SPRN_DAR
- mfspr r12,SPRN_DSISR
- std r11,_DAR(r1)
- std r12,_DSISR(r1)
- mflr r10
- mfctr r11
- mfxer r12
- std r10,_LINK(r1)
- std r11,_CTR(r1)
- std r12,_XER(r1)
- SAVE_GPR(0,r1)
- SAVE_GPR(2,r1)
- SAVE_4GPRS(3,r1)
- SAVE_2GPRS(7,r1)
- SAVE_10GPRS(12,r1)
- SAVE_10GPRS(22,r1)
- lhz r12,PACA_TRAP_SAVE(r13)
- std r12,_TRAP(r1)
- addi r11,r1,INT_FRAME_SIZE
- std r11,0(r1)
- li r12,0
- std r12,0(r11)
- ld r2,PACATOC(r13)
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
- b 1b
-
-/*
- * Here r13 points to the paca, r9 contains the saved CR,
- * SRR0 and SRR1 are saved in r11 and r12,
- * r9 - r13 are saved in paca->exgen.
- */
- .align 7
- .globl data_access_common
-data_access_common:
- mfspr r10,SPRN_DAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_DSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
- ld r3,PACA_EXGEN+EX_DAR(r13)
- lwz r4,PACA_EXGEN+EX_DSISR(r13)
- li r5,0x300
- b .do_hash_page /* Try to handle as hpte fault */
-
- .align 7
- .globl instruction_access_common
-instruction_access_common:
- EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
- ld r3,_NIP(r1)
- andis. r4,r12,0x5820
- li r5,0x400
- b .do_hash_page /* Try to handle as hpte fault */
-
-/*
- * Here is the common SLB miss user that is used when going to virtual
- * mode for SLB misses, that is currently not used
- */
-#ifdef __DISABLED__
- .align 7
- .globl slb_miss_user_common
-slb_miss_user_common:
- mflr r10
- std r3,PACA_EXGEN+EX_DAR(r13)
- stw r9,PACA_EXGEN+EX_CCR(r13)
- std r10,PACA_EXGEN+EX_LR(r13)
- std r11,PACA_EXGEN+EX_SRR0(r13)
- bl .slb_allocate_user
-
- ld r10,PACA_EXGEN+EX_LR(r13)
- ld r3,PACA_EXGEN+EX_R3(r13)
- lwz r9,PACA_EXGEN+EX_CCR(r13)
- ld r11,PACA_EXGEN+EX_SRR0(r13)
- mtlr r10
- beq- slb_miss_fault
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_user_slb
- mfmsr r10
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
-.machine pop
-
- clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
- mtmsrd r10,1
-
- mtspr SRR0,r11
- mtspr SRR1,r12
-
- ld r9,PACA_EXGEN+EX_R9(r13)
- ld r10,PACA_EXGEN+EX_R10(r13)
- ld r11,PACA_EXGEN+EX_R11(r13)
- ld r12,PACA_EXGEN+EX_R12(r13)
- ld r13,PACA_EXGEN+EX_R13(r13)
- rfid
- b .
-
-slb_miss_fault:
- EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
- ld r4,PACA_EXGEN+EX_DAR(r13)
- li r5,0
- std r4,_DAR(r1)
- std r5,_DSISR(r1)
- b handle_page_fault
-
-unrecov_user_slb:
- EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-#endif /* __DISABLED__ */
-
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-#ifdef CONFIG_RELOCATABLE
- mtctr r11
-#endif
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- ld r11,PACALPPACAPTR(r13)
- ld r11,LPPACASRR0(r11) /* get SRR0 value */
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- 2f
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-2:
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- b unrecov_slb
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
- mfspr r11,SPRN_SRR0
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10,unrecov_slb)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b .
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
- .align 7
- .globl hardware_interrupt_common
- .globl hardware_interrupt_entry
-hardware_interrupt_common:
- EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
- FINISH_NAP
-hardware_interrupt_entry:
- DISABLE_INTS
-BEGIN_FTR_SECTION
- bl .ppc64_runlatch_on
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_IRQ
- b .ret_from_except_lite
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
- andc r9,r9,r10
- std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
- blr
-#endif
-
- .align 7
- .globl alignment_common
-alignment_common:
- mfspr r10,SPRN_DAR
- std r10,PACA_EXGEN+EX_DAR(r13)
- mfspr r10,SPRN_DSISR
- stw r10,PACA_EXGEN+EX_DSISR(r13)
- EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
- ld r3,PACA_EXGEN+EX_DAR(r13)
- lwz r4,PACA_EXGEN+EX_DSISR(r13)
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .alignment_exception
- b .ret_from_except
-
- .align 7
- .globl program_check_common
-program_check_common:
- EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .program_check_exception
- b .ret_from_except
-
- .align 7
- .globl fp_unavailable_common
-fp_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
- bne 1f /* if from user, just load it up */
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .kernel_fp_unavailable_exception
- BUG_OPCODE
-1: bl .load_up_fpu
- b fast_exception_return
-
- .align 7
- .globl altivec_unavailable_common
-altivec_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
- beq 1f
- bl .load_up_altivec
- b fast_exception_return
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .altivec_unavailable_exception
- b .ret_from_except
-
- .align 7
- .globl vsx_unavailable_common
-vsx_unavailable_common:
- EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
- bne .load_up_vsx
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
- bl .save_nvgprs
- addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
- bl .vsx_unavailable_exception
- b .ret_from_except
-
- .align 7
- .globl __end_handlers
-__end_handlers:
-
-/*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
+ * On server, we include the exception vectors code here as it
+ * relies on absolute addressing which is only possible within
+ * this compilation unit
*/
-fast_exc_return_irq: /* restores irq state too */
- ld r3,SOFTE(r1)
- TRACE_AND_RESTORE_IRQ(r3);
- ld r12,_MSR(r1)
- rldicl r4,r12,49,63 /* get MSR_EE to LSB */
- stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
- b 1f
-
- .globl fast_exception_return
-fast_exception_return:
- ld r12,_MSR(r1)
-1: ld r11,_NIP(r1)
- andi. r3,r12,MSR_RI /* check if RI is set */
- beq- unrecov_fer
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- andi. r3,r12,MSR_PR
- beq 2f
- ACCOUNT_CPU_USER_EXIT(r3, r4)
-2:
+#ifdef CONFIG_PPC_BOOK3S
+#include "exceptions-64s.S"
#endif
- ld r3,_CCR(r1)
- ld r4,_LINK(r1)
- ld r5,_CTR(r1)
- ld r6,_XER(r1)
- mtcr r3
- mtlr r4
- mtctr r5
- mtxer r6
- REST_GPR(0, r1)
- REST_8GPRS(2, r1)
-
- mfmsr r10
- rldicl r10,r10,48,1 /* clear EE */
- rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
- mtmsrd r10,1
-
- mtspr SPRN_SRR1,r12
- mtspr SPRN_SRR0,r11
- REST_4GPRS(10, r1)
- ld r1,GPR1(r1)
- rfid
- b . /* prevent speculative execution */
-
-unrecov_fer:
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-#ifdef CONFIG_ALTIVEC
-/*
- * load_up_altivec(unused, unused, tsk)
- * Disable VMX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- * On SMP we know the VMX is free, since we give it up every
- * switch (ie, no lazy save of the vector registers).
- * On entry: r13 == 'current' && last_task_used_altivec != 'current'
- */
-_STATIC(load_up_altivec)
- mfmsr r5 /* grab the current MSR */
- oris r5,r5,MSR_VEC@h
- mtmsrd r5 /* enable use of VMX now */
- isync
-
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
- ld r3,last_task_used_altivec@got(r2)
- ld r4,0(r3)
- cmpdi 0,r4,0
- beq 1f
- /* Save VMX state to last_task_used_altivec's THREAD struct */
- addi r4,r4,THREAD
- SAVE_32VRS(0,r5,r4)
- mfvscr vr0
- li r10,THREAD_VSCR
- stvx vr0,r10,r4
- /* Disable VMX for last_task_used_altivec */
- ld r5,PT_REGS(r4)
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r6,MSR_VEC@h
- andc r4,r4,r6
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* Hack: if we get an altivec unavailable trap with VRSAVE
- * set to all zeros, we assume this is a broken application
- * that fails to set it properly, and thus we switch it to
- * all 1's
- */
- mfspr r4,SPRN_VRSAVE
- cmpdi 0,r4,0
- bne+ 1f
- li r4,-1
- mtspr SPRN_VRSAVE,r4
-1:
- /* enable use of VMX after return */
- ld r4,PACACURRENT(r13)
- addi r5,r4,THREAD /* Get THREAD */
- oris r12,r12,MSR_VEC@h
- std r12,_MSR(r1)
- li r4,1
- li r10,THREAD_VSCR
- stw r4,THREAD_USED_VR(r5)
- lvx vr0,r10,r5
- mtvscr vr0
- REST_32VRS(0,r4,r5)
-#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
- subi r4,r5,THREAD /* Back to 'current' */
- std r4,0(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- blr
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_VSX
-/*
- * load_up_vsx(unused, unused, tsk)
- * Disable VSX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Reuse the fp and vsx saves, but first check to see if they have
- * been saved already.
- * On entry: r13 == 'current' && last_task_used_vsx != 'current'
- */
-_STATIC(load_up_vsx)
-/* Load FP and VSX registers if they haven't been done yet */
- andi. r5,r12,MSR_FP
- beql+ load_up_fpu /* skip if already loaded */
- andis. r5,r12,MSR_VEC@h
- beql+ load_up_altivec /* skip if already loaded */
-
-#ifndef CONFIG_SMP
- ld r3,last_task_used_vsx@got(r2)
- ld r4,0(r3)
- cmpdi 0,r4,0
- beq 1f
- /* Disable VSX for last_task_used_vsx */
- addi r4,r4,THREAD
- ld r5,PT_REGS(r4)
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r6,MSR_VSX@h
- andc r6,r4,r6
- std r6,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- ld r4,PACACURRENT(r13)
- addi r4,r4,THREAD /* Get THREAD */
- li r6,1
- stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
- /* enable use of VSX after return */
- oris r12,r12,MSR_VSX@h
- std r12,_MSR(r1)
-#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
- ld r4,PACACURRENT(r13)
- std r4,0(r3)
-#endif /* CONFIG_SMP */
- b fast_exception_return
-#endif /* CONFIG_VSX */
-
-/*
- * Hash table stuff
- */
- .align 7
-_STATIC(do_hash_page)
- std r3,_DAR(r1)
- std r4,_DSISR(r1)
-
- andis. r0,r4,0xa450 /* weird error? */
- bne- handle_page_fault /* if not, try to insert a HPTE */
-BEGIN_FTR_SECTION
- andis. r0,r4,0x0020 /* Is it a segment table fault? */
- bne- do_ste_alloc /* If so handle it */
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-
- /*
- * On iSeries, we soft-disable interrupts here, then
- * hard-enable interrupts so that the hash_page code can spin on
- * the hash_table_lock without problems on a shared processor.
- */
- DISABLE_INTS
-
- /*
- * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
- * and will clobber volatile registers when irq tracing is enabled
- * so we need to reload them. It may be possible to be smarter here
- * and move the irq tracing elsewhere but let's keep it simple for
- * now
- */
-#ifdef CONFIG_TRACE_IRQFLAGS
- ld r3,_DAR(r1)
- ld r4,_DSISR(r1)
- ld r5,_TRAP(r1)
- ld r12,_MSR(r1)
- clrrdi r5,r5,4
-#endif /* CONFIG_TRACE_IRQFLAGS */
- /*
- * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
- * accessing a userspace segment (even from the kernel). We assume
- * kernel addresses always have the high bit set.
- */
- rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
- rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
- orc r0,r12,r0 /* MSR_PR | ~high_bit */
- rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
- ori r4,r4,1 /* add _PAGE_PRESENT */
- rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
-
- /*
- * r3 contains the faulting address
- * r4 contains the required access permissions
- * r5 contains the trap number
- *
- * at return r3 = 0 for success
- */
- bl .hash_page /* build HPTE if possible */
- cmpdi r3,0 /* see if hash_page succeeded */
-
-BEGIN_FW_FTR_SECTION
- /*
- * If we had interrupts soft-enabled at the point where the
- * DSI/ISI occurred, and an interrupt came in during hash_page,
- * handle it now.
- * We jump to ret_from_except_lite rather than fast_exception_return
- * because ret_from_except_lite will check for and handle pending
- * interrupts if necessary.
- */
- beq 13f
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
-BEGIN_FW_FTR_SECTION
- /*
- * Here we have interrupts hard-disabled, so it is sufficient
- * to restore paca->{soft,hard}_enable and get out.
- */
- beq fast_exc_return_irq /* Return from exception on success */
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-
- /* For a hash failure, we don't bother re-enabling interrupts */
- ble- 12f
-
- /*
- * hash_page couldn't handle it, set soft interrupt enable back
- * to what it was before the trap. Note that .raw_local_irq_restore
- * handles any interrupts pending at this point.
- */
- ld r3,SOFTE(r1)
- TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
- bl .raw_local_irq_restore
- b 11f
-
-/* Here we have a page fault that hash_page can't handle. */
-handle_page_fault:
- ENABLE_INTS
-11: ld r4,_DAR(r1)
- ld r5,_DSISR(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_page_fault
- cmpdi r3,0
- beq+ 13f
- bl .save_nvgprs
- mr r5,r3
- addi r3,r1,STACK_FRAME_OVERHEAD
- lwz r4,_DAR(r1)
- bl .bad_page_fault
- b .ret_from_except
-
-13: b .ret_from_except_lite
-
-/* We have a page fault that hash_page could handle but HV refused
- * the PTE insertion
- */
-12: bl .save_nvgprs
- mr r5,r3
- addi r3,r1,STACK_FRAME_OVERHEAD
- ld r4,_DAR(r1)
- bl .low_hash_fault
- b .ret_from_except
-
- /* here we have a segment miss */
-do_ste_alloc:
- bl .ste_allocate /* try to insert stab entry */
- cmpdi r3,0
- bne- handle_page_fault
- b fast_exception_return
-
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r11 and r12 contain the saved SRR0 and SRR1.
- * r9 - r13 are saved in paca->exslb.
- * We assume we aren't going to take any exceptions during this procedure.
- * We assume (DAR >> 60) == 0xc.
- */
- .align 7
-_GLOBAL(do_stab_bolted)
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
-
- /* Hash to the primary group */
- ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
- rldimi r10,r11,7,52 /* r10 = first ste of the group */
-
- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID */
- ASM_VSID_SCRAMBLE(r11, r9, 256M)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
- /* Search the primary group for a free entry */
-1: ld r11,0(r10) /* Test valid bit of the current ste */
- andi. r11,r11,0x80
- beq 2f
- addi r10,r10,16
- andi. r11,r10,0x70
- bne 1b
-
- /* Stick for only searching the primary group for now. */
- /* At least for now, we use a very simple random castout scheme */
- /* Use the TB as a random number ; OR in 1 to avoid entry 0 */
- mftb r11
- rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
- ori r11,r11,0x10
-
- /* r10 currently points to an ste one past the group of interest */
- /* make it point to the randomly selected entry */
- subi r10,r10,128
- or r10,r10,r11 /* r10 is the entry to invalidate */
-
- isync /* mark the entry invalid */
- ld r11,0(r10)
- rldicl r11,r11,56,1 /* clear the valid bit */
- rotldi r11,r11,8
- std r11,0(r10)
- sync
-
- clrrdi r11,r11,28 /* Get the esid part of the ste */
- slbie r11
-
-2: std r9,8(r10) /* Store the vsid part of the ste */
- eieio
-
- mfspr r11,SPRN_DAR /* Get the new esid */
- clrrdi r11,r11,28 /* Permits a full 32b of ESID */
- ori r11,r11,0x90 /* Turn on valid and kp */
- std r11,0(r10) /* Put new entry back into the stab */
-
- sync
-
- /* All done -- return from exception. */
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
- ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
-
- andi. r10,r12,MSR_RI
- beq- unrecov_slb
-
- mtcrf 0x80,r9 /* restore CR */
-
- mfmsr r10
- clrrdi r10,r10,2
- mtmsrd r10,1
-
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on). The address is given to the hv
- * as a page number (see xLparMap below), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
- . = STAB0_OFFSET /* 0x6000 */
- .globl initial_stab
-initial_stab:
- .space 4096
-
-#ifdef CONFIG_PPC_PSERIES
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
- .= 0x7000
- .globl fwnmi_data_area
-fwnmi_data_area:
-#endif /* CONFIG_PPC_PSERIES */
-
- /* iSeries does not use the FWNMI stuff, so it is safe to put
- * this here, even if we later allow kernels that will boot on
- * both pSeries and iSeries */
-#ifdef CONFIG_PPC_ISERIES
- . = LPARMAP_PHYS
- .globl xLparMap
-xLparMap:
- .quad HvEsidsToMap /* xNumberEsids */
- .quad HvRangesToMap /* xNumberRanges */
- .quad STAB0_PAGE /* xSegmentTableOffs */
- .zero 40 /* xRsvd */
- /* xEsids (HvEsidsToMap entries of 2 quads) */
- .quad PAGE_OFFSET_ESID /* xKernelEsid */
- .quad PAGE_OFFSET_VSID /* xKernelVsid */
- .quad VMALLOC_START_ESID /* xKernelEsid */
- .quad VMALLOC_START_VSID /* xKernelVsid */
- /* xRanges (HvRangesToMap entries of 3 quads) */
- .quad HvPagesToMap /* xPages */
- .quad 0 /* xOffset */
- .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */
-
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_PSERIES
- . = 0x8000
-#endif /* CONFIG_PPC_PSERIES */
/*
* On pSeries and most other platforms, secondary processors spin
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 95f39f1e68d4..5f9febc8d143 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -256,7 +256,7 @@ label:
* off DE in the DSRR1 value and clearing the debug status. \
*/ \
mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
- andis. r10,r10,DBSR_IC@h; \
+ andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
beq+ 2f; \
\
lis r10,KERNELBASE@h; /* check if exception in vectors */ \
@@ -271,7 +271,7 @@ label:
\
/* here it looks like we got an inappropriate debug exception. */ \
1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
- lis r10,DBSR_IC@h; /* clear the IC event */ \
+ lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
mtspr SPRN_DBSR,r10; \
/* restore state and get out */ \
lwz r10,_CCR(r11); \
@@ -309,7 +309,7 @@ label:
* off DE in the CSRR1 value and clearing the debug status. \
*/ \
mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
- andis. r10,r10,DBSR_IC@h; \
+ andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
beq+ 2f; \
\
lis r10,KERNELBASE@h; /* check if exception in vectors */ \
@@ -317,14 +317,14 @@ label:
cmplw r12,r10; \
blt+ 2f; /* addr below exception vectors */ \
\
- lis r10,DebugCrit@h; \
+ lis r10,DebugCrit@h; \
ori r10,r10,DebugCrit@l; \
cmplw r12,r10; \
bgt+ 2f; /* addr above exception vectors */ \
\
/* here it looks like we got an inappropriate debug exception. */ \
1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
- lis r10,DBSR_IC@h; /* clear the IC event */ \
+ lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
mtspr SPRN_DBSR,r10; \
/* restore state and get out */ \
lwz r10,_CCR(r11); \
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 844d3f882a15..f7f376ea7b17 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -118,6 +118,7 @@ notrace void raw_local_irq_restore(unsigned long en)
if (!en)
return;
+#ifdef CONFIG_PPC_STD_MMU_64
if (firmware_has_feature(FW_FEATURE_ISERIES)) {
/*
* Do we need to disable preemption here? Not really: in the
@@ -135,6 +136,7 @@ notrace void raw_local_irq_restore(unsigned long en)
if (local_paca->lppaca_ptr->int_dword.any_int)
iseries_handle_interrupts();
}
+#endif /* CONFIG_PPC_STD_MMU_64 */
if (test_perf_counter_pending()) {
clear_perf_counter_pending();
@@ -254,77 +256,84 @@ void fixup_irqs(cpumask_t map)
}
#endif
-void do_IRQ(struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
- unsigned int irq;
#ifdef CONFIG_IRQSTACKS
+static inline void handle_one_irq(unsigned int irq)
+{
struct thread_info *curtp, *irqtp;
-#endif
+ unsigned long saved_sp_limit;
+ struct irq_desc *desc;
- irq_enter();
+ /* Switch to the irq stack to handle this */
+ curtp = current_thread_info();
+ irqtp = hardirq_ctx[smp_processor_id()];
+
+ if (curtp == irqtp) {
+ /* We're already on the irq stack, just handle it */
+ generic_handle_irq(irq);
+ return;
+ }
+
+ desc = irq_desc + irq;
+ saved_sp_limit = current->thread.ksp_limit;
+
+ irqtp->task = curtp->task;
+ irqtp->flags = 0;
+
+ /* Copy the softirq bits in preempt_count so that the
+ * softirq checks work in the hardirq context. */
+ irqtp->preempt_count = (irqtp->preempt_count & ~SOFTIRQ_MASK) |
+ (curtp->preempt_count & SOFTIRQ_MASK);
+
+ current->thread.ksp_limit = (unsigned long)irqtp +
+ _ALIGN_UP(sizeof(struct thread_info), 16);
+
+ call_handle_irq(irq, desc, irqtp, desc->handle_irq);
+ current->thread.ksp_limit = saved_sp_limit;
+ irqtp->task = NULL;
+
+ /* Set any flag that may have been set on the
+ * alternate stack
+ */
+ if (irqtp->flags)
+ set_bits(irqtp->flags, &curtp->flags);
+}
+#else
+static inline void handle_one_irq(unsigned int irq)
+{
+ generic_handle_irq(irq);
+}
+#endif
+static inline void check_stack_overflow(void)
+{
#ifdef CONFIG_DEBUG_STACKOVERFLOW
- /* Debugging check for stack overflow: is there less than 2KB free? */
- {
- long sp;
+ long sp;
- sp = __get_SP() & (THREAD_SIZE-1);
+ sp = __get_SP() & (THREAD_SIZE-1);
- if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
- printk("do_IRQ: stack overflow: %ld\n",
- sp - sizeof(struct thread_info));
- dump_stack();
- }
+ /* check for stack overflow: is there less than 2KB free? */
+ if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
+ printk("do_IRQ: stack overflow: %ld\n",
+ sp - sizeof(struct thread_info));
+ dump_stack();
}
#endif
+}
- /*
- * Every platform is required to implement ppc_md.get_irq.
- * This function will either return an irq number or NO_IRQ to
- * indicate there are no more pending.
- * The value NO_IRQ_IGNORE is for buggy hardware and means that this
- * IRQ has already been handled. -- Tom
- */
- irq = ppc_md.get_irq();
+void do_IRQ(struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ unsigned int irq;
- if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
-#ifdef CONFIG_IRQSTACKS
- /* Switch to the irq stack to handle this */
- curtp = current_thread_info();
- irqtp = hardirq_ctx[smp_processor_id()];
- if (curtp != irqtp) {
- struct irq_desc *desc = irq_desc + irq;
- void *handler = desc->handle_irq;
- unsigned long saved_sp_limit = current->thread.ksp_limit;
- if (handler == NULL)
- handler = &__do_IRQ;
- irqtp->task = curtp->task;
- irqtp->flags = 0;
-
- /* Copy the softirq bits in preempt_count so that the
- * softirq checks work in the hardirq context.
- */
- irqtp->preempt_count =
- (irqtp->preempt_count & ~SOFTIRQ_MASK) |
- (curtp->preempt_count & SOFTIRQ_MASK);
+ irq_enter();
- current->thread.ksp_limit = (unsigned long)irqtp +
- _ALIGN_UP(sizeof(struct thread_info), 16);
- call_handle_irq(irq, desc, irqtp, handler);
- current->thread.ksp_limit = saved_sp_limit;
- irqtp->task = NULL;
+ check_stack_overflow();
+ irq = ppc_md.get_irq();
- /* Set any flag that may have been set on the
- * alternate stack
- */
- if (irqtp->flags)
- set_bits(irqtp->flags, &curtp->flags);
- } else
-#endif
- generic_handle_irq(irq);
- } else if (irq != NO_IRQ_IGNORE)
+ if (irq != NO_IRQ && irq != NO_IRQ_IGNORE)
+ handle_one_irq(irq);
+ else if (irq != NO_IRQ_IGNORE)
/* That's not SMP safe ... but who cares ? */
ppc_spurious_interrupts++;
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 78b3f7840ade..2419cc706ff1 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -169,6 +169,9 @@ struct hvcall_ppp_data {
u8 unallocated_weight;
u16 active_procs_in_pool;
u16 active_system_procs;
+ u16 phys_platform_procs;
+ u32 max_proc_cap_avail;
+ u32 entitled_proc_cap_avail;
};
/*
@@ -190,13 +193,18 @@ struct hvcall_ppp_data {
* XX - Unallocated Variable Processor Capacity Weight.
* XXXX - Active processors in Physical Processor Pool.
* XXXX - Processors active on platform.
+ * R8 (QQQQRRRRRRSSSSSS). if ibm,partition-performance-parameters-level >= 1
+ * XXXX - Physical platform procs allocated to virtualization.
+ * XXXXXX - Max procs capacity % available to the partitions pool.
+ * XXXXXX - Entitled procs capacity % available to the
+ * partitions pool.
*/
static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
{
unsigned long rc;
- unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+ unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
- rc = plpar_hcall(H_GET_PPP, retbuf);
+ rc = plpar_hcall9(H_GET_PPP, retbuf);
ppp_data->entitlement = retbuf[0];
ppp_data->unallocated_entitlement = retbuf[1];
@@ -210,6 +218,10 @@ static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
ppp_data->active_system_procs = retbuf[3] & 0xffff;
+ ppp_data->phys_platform_procs = retbuf[4] >> 6 * 8;
+ ppp_data->max_proc_cap_avail = (retbuf[4] >> 3 * 8) & 0xffffff;
+ ppp_data->entitled_proc_cap_avail = retbuf[4] & 0xffffff;
+
return rc;
}
@@ -234,6 +246,8 @@ static unsigned h_pic(unsigned long *pool_idle_time,
static void parse_ppp_data(struct seq_file *m)
{
struct hvcall_ppp_data ppp_data;
+ struct device_node *root;
+ const int *perf_level;
int rc;
rc = h_get_ppp(&ppp_data);
@@ -267,6 +281,28 @@ static void parse_ppp_data(struct seq_file *m)
seq_printf(m, "capped=%d\n", ppp_data.capped);
seq_printf(m, "unallocated_capacity=%lld\n",
ppp_data.unallocated_entitlement);
+
+ /* The last bits of information returned from h_get_ppp are only
+ * valid if the ibm,partition-performance-parameters-level
+ * property is >= 1.
+ */
+ root = of_find_node_by_path("/");
+ if (root) {
+ perf_level = of_get_property(root,
+ "ibm,partition-performance-parameters-level",
+ NULL);
+ if (perf_level && (*perf_level >= 1)) {
+ seq_printf(m,
+ "physical_procs_allocated_to_virtualization=%d\n",
+ ppp_data.phys_platform_procs);
+ seq_printf(m, "max_proc_capacity_available=%d\n",
+ ppp_data.max_proc_cap_avail);
+ seq_printf(m, "entitled_proc_capacity_available=%d\n",
+ ppp_data.entitled_proc_cap_avail);
+ }
+
+ of_node_put(root);
+ }
}
/**
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index b9530b2395a2..a5cf9c1356a6 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -457,98 +457,6 @@ _GLOBAL(disable_kernel_fp)
isync
blr
-#ifdef CONFIG_ALTIVEC
-
-#if 0 /* this has no callers for now */
-/*
- * disable_kernel_altivec()
- * Disable the VMX.
- */
-_GLOBAL(disable_kernel_altivec)
- mfmsr r3
- rldicl r0,r3,(63-MSR_VEC_LG),1
- rldicl r3,r0,(MSR_VEC_LG+1),0
- mtmsrd r3 /* disable use of VMX now */
- isync
- blr
-#endif /* 0 */
-
-/*
- * giveup_altivec(tsk)
- * Disable VMX for the task given as the argument,
- * and save the vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- */
-_GLOBAL(giveup_altivec)
- mfmsr r5
- oris r5,r5,MSR_VEC@h
- mtmsrd r5 /* enable use of VMX now */
- isync
- cmpdi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- ld r5,PT_REGS(r3)
- cmpdi 0,r5,0
- SAVE_32VRS(0,r4,r3)
- mfvscr vr0
- li r4,THREAD_VSCR
- stvx vr0,r4,r3
- beq 1f
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
- lis r3,(MSR_VEC|MSR_VSX)@h
-FTR_SECTION_ELSE
- lis r3,MSR_VEC@h
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
-#else
- lis r3,MSR_VEC@h
-#endif
- andc r4,r4,r3 /* disable FP for previous task */
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- ld r4,last_task_used_altivec@got(r2)
- std r5,0(r4)
-#endif /* CONFIG_SMP */
- blr
-
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_VSX
-/*
- * __giveup_vsx(tsk)
- * Disable VSX for the task given as the argument.
- * Does NOT save vsx registers.
- * Enables the VSX for use in the kernel on return.
- */
-_GLOBAL(__giveup_vsx)
- mfmsr r5
- oris r5,r5,MSR_VSX@h
- mtmsrd r5 /* enable use of VSX now */
- isync
-
- cmpdi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- ld r5,PT_REGS(r3)
- cmpdi 0,r5,0
- beq 1f
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r3,MSR_VSX@h
- andc r4,r4,r3 /* disable VSX for previous task */
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- ld r4,last_task_used_vsx@got(r2)
- std r5,0(r4)
-#endif /* CONFIG_SMP */
- blr
-
-#endif /* CONFIG_VSX */
-
/* kexec_wait(phys_cpu)
*
* wait for the flag to change, indicating this kernel is going away but
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index c744b327bcab..e9962c7f8a09 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -18,6 +18,8 @@
* field correctly */
extern unsigned long __toc_start;
+#ifdef CONFIG_PPC_BOOK3S
+
/*
* The structure which the hypervisor knows about - this structure
* should not cross a page boundary. The vpa_init/register_vpa call
@@ -41,6 +43,10 @@ struct lppaca lppaca[] = {
},
};
+#endif /* CONFIG_PPC_BOOK3S */
+
+#ifdef CONFIG_PPC_STD_MMU_64
+
/*
* 3 persistent SLBs are registered here. The buffer will be zero
* initially, hence will all be invaild until we actually write them.
@@ -52,6 +58,8 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
},
};
+#endif /* CONFIG_PPC_STD_MMU_64 */
+
/* The Paca is an array with one entry per processor. Each contains an
* lppaca, which contains the information shared between the
* hypervisor and Linux.
@@ -77,15 +85,19 @@ void __init initialise_pacas(void)
for (cpu = 0; cpu < NR_CPUS; cpu++) {
struct paca_struct *new_paca = &paca[cpu];
+#ifdef CONFIG_PPC_BOOK3S
new_paca->lppaca_ptr = &lppaca[cpu];
+#endif
new_paca->lock_token = 0x8000;
new_paca->paca_index = cpu;
new_paca->kernel_toc = kernel_toc;
new_paca->kernelbase = (unsigned long) _stext;
new_paca->kernel_msr = MSR_KERNEL;
new_paca->hw_cpu_id = 0xffff;
- new_paca->slb_shadow_ptr = &slb_shadow[cpu];
new_paca->__current = &init_task;
+#ifdef CONFIG_PPC_STD_MMU_64
+ new_paca->slb_shadow_ptr = &slb_shadow[cpu];
+#endif /* CONFIG_PPC_STD_MMU_64 */
}
}
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 4fee63cb53ff..5a56e97c5ac0 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1505,7 +1505,7 @@ void __init pcibios_resource_survey(void)
* rest of the code later, for now, keep it as-is as our main
* resource allocation function doesn't deal with sub-trees yet.
*/
-void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
+void pcibios_claim_one_bus(struct pci_bus *bus)
{
struct pci_dev *dev;
struct pci_bus *child_bus;
@@ -1533,7 +1533,6 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
list_for_each_entry(child_bus, &bus->children, node)
pcibios_claim_one_bus(child_bus);
}
-EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
/* pcibios_finish_adding_to_bus
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index d473634e39e3..3ae1c666ff92 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -33,7 +33,6 @@ int pcibios_assign_bus_offset = 1;
void pcibios_make_OF_bus_map(void);
-static void fixup_broken_pcnet32(struct pci_dev* dev);
static void fixup_cpc710_pci64(struct pci_dev* dev);
#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;
@@ -72,16 +71,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_res
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
static void
-fixup_broken_pcnet32(struct pci_dev* dev)
-{
- if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
- dev->vendor = PCI_VENDOR_ID_AMD;
- pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
-
-static void
fixup_cpc710_pci64(struct pci_dev* dev)
{
/* Hide the PCI64 BARs from the kernel as their content doesn't
@@ -447,14 +436,6 @@ static int __init pcibios_init(void)
subsys_initcall(pcibios_init);
-/* the next one is stolen from the alpha port... */
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
- /* XXX FIXME - update OF device tree node interrupt property */
-}
-
static struct pci_controller*
pci_bus_to_hose(int bus)
{
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 96edb6f8babb..9e8902fa14c7 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,16 +43,6 @@ unsigned long pci_probe_only = 1;
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
-static void fixup_broken_pcnet32(struct pci_dev* dev)
-{
- if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
- dev->vendor = PCI_VENDOR_ID_AMD;
- pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
-
-
static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
{
const u32 *prop;
@@ -430,6 +420,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
* so flushing the hash table is the only sane way to make sure
* that no hash entries are covering that removed bridge area
* while still allowing other busses overlapping those pages
+ *
+ * Note: If we ever support P2P hotplug on Book3E, we'll have
+ * to do an appropriate TLB flush here too
*/
if (bus->self) {
struct resource *res = bus->resource[0];
@@ -437,8 +430,10 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
pr_debug("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
+#ifdef CONFIG_PPC_STD_MMU_64
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
res->end + _IO_BASE + 1);
+#endif
return 0;
}
@@ -511,7 +506,7 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
pr_debug(" phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
- pr_debug(" size=0x%016lx (alloc=0x%016lx)\n",
+ pr_debug(" size=0x%016llx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
/* Establish the mapping */
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 1c67de52e3ce..d5e36e5dc7c2 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -27,7 +27,6 @@
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
-#include <asm/pSeries_reconfig.h>
#include <asm/ppc-pci.h>
#include <asm/firmware.h>
@@ -35,7 +34,7 @@
* Traverse_func that inits the PCI fields of the device node.
* NOTE: this *must* be done before read/write config to the device.
*/
-static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
+void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
{
struct pci_controller *phb = data;
const int *type =
@@ -184,29 +183,6 @@ struct device_node *fetch_dev_dn(struct pci_dev *dev)
}
EXPORT_SYMBOL(fetch_dev_dn);
-static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
- struct device_node *np = node;
- struct pci_dn *pci = NULL;
- int err = NOTIFY_OK;
-
- switch (action) {
- case PSERIES_RECONFIG_ADD:
- pci = np->parent->data;
- if (pci)
- update_dn_pci_info(np, pci->phb);
- break;
- default:
- err = NOTIFY_DONE;
- break;
- }
- return err;
-}
-
-static struct notifier_block pci_dn_reconfig_nb = {
- .notifier_call = pci_dn_reconfig_notifier,
-};
-
/**
* pci_devs_phb_init - Initialize phbs and pci devs under them.
*
@@ -223,6 +199,4 @@ void __init pci_devs_phb_init(void)
/* This must be done first so the device nodes have valid pci info! */
list_for_each_entry_safe(phb, tmp, &hose_list, list_node)
pci_devs_phb_init_dynamic(phb);
-
- pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
}
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7b44a33f03c2..3e7135bbe40f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -650,7 +650,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
p->thread.ksp_limit = (unsigned long)task_stack_page(p) +
_ALIGN_UP(sizeof(struct thread_info), 16);
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
if (cpu_has_feature(CPU_FTR_SLB)) {
unsigned long sp_vsid;
unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index ce01ff2474da..d4405b95bfaa 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -585,7 +585,7 @@ static void __init check_cpu_pa_features(unsigned long node)
ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
}
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_STD_MMU_64
static void __init check_cpu_slb_size(unsigned long node)
{
u32 *slb_size_ptr;
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 3635be61f899..9fa2c7dcd05a 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -704,15 +704,34 @@ void user_enable_single_step(struct task_struct *task)
if (regs != NULL) {
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+ task->thread.dbcr0 &= ~DBCR0_BT;
task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
regs->msr |= MSR_DE;
#else
+ regs->msr &= ~MSR_BE;
regs->msr |= MSR_SE;
#endif
}
set_tsk_thread_flag(task, TIF_SINGLESTEP);
}
+void user_enable_block_step(struct task_struct *task)
+{
+ struct pt_regs *regs = task->thread.regs;
+
+ if (regs != NULL) {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+ task->thread.dbcr0 &= ~DBCR0_IC;
+ task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT;
+ regs->msr |= MSR_DE;
+#else
+ regs->msr &= ~MSR_SE;
+ regs->msr |= MSR_BE;
+#endif
+ }
+ set_tsk_thread_flag(task, TIF_SINGLESTEP);
+}
+
void user_disable_single_step(struct task_struct *task)
{
struct pt_regs *regs = task->thread.regs;
@@ -726,10 +745,10 @@ void user_disable_single_step(struct task_struct *task)
if (regs != NULL) {
#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
- task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
+ task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
regs->msr &= ~MSR_DE;
#else
- regs->msr &= ~MSR_SE;
+ regs->msr &= ~(MSR_SE | MSR_BE);
#endif
}
clear_tsk_thread_flag(task, TIF_SINGLESTEP);
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 8869001ab5d7..54e66da8f743 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -93,10 +93,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
{
struct device_node *busdn, *dn;
- if (bus->self)
- busdn = pci_device_to_OF_node(bus->self);
- else
- busdn = bus->sysdata; /* must be a phb */
+ busdn = pci_bus_to_OF_node(bus);
/* Search only direct children of the bus */
for (dn = busdn->child; dn; dn = dn->sibling) {
@@ -140,10 +137,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
{
struct device_node *busdn, *dn;
- if (bus->self)
- busdn = pci_device_to_OF_node(bus->self);
- else
- busdn = bus->sysdata; /* must be a phb */
+ busdn = pci_bus_to_OF_node(bus);
/* Search only direct children of the bus */
for (dn = busdn->child; dn; dn = dn->sibling) {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 9e1ca745d8f0..1d154248cf40 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -39,6 +39,7 @@
#include <asm/serial.h>
#include <asm/udbg.h>
#include <asm/mmu_context.h>
+#include <asm/swiotlb.h>
#include "setup.h"
@@ -332,6 +333,11 @@ void __init setup_arch(char **cmdline_p)
ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
+#ifdef CONFIG_SWIOTLB
+ if (ppc_swiotlb_enable)
+ swiotlb_init();
+#endif
+
paging_init();
/* Initialize the MMU context management stuff */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index c410c606955d..f46548e66045 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -61,6 +61,7 @@
#include <asm/xmon.h>
#include <asm/udbg.h>
#include <asm/kexec.h>
+#include <asm/swiotlb.h>
#include "setup.h"
@@ -417,9 +418,11 @@ void __init setup_system(void)
if (ppc64_caches.iline_size != 0x80)
printk("ppc64_caches.icache_line_size = 0x%x\n",
ppc64_caches.iline_size);
+#ifdef CONFIG_PPC_STD_MMU_64
if (htab_address)
printk("htab_address = 0x%p\n", htab_address);
printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
+#endif /* CONFIG_PPC_STD_MMU_64 */
if (PHYSICAL_START > 0)
printk("physical_start = 0x%lx\n",
PHYSICAL_START);
@@ -511,8 +514,9 @@ void __init setup_arch(char **cmdline_p)
irqstack_early_init();
emergency_stack_init();
+#ifdef CONFIG_PPC_STD_MMU_64
stabs_alloc();
-
+#endif
/* set up the bootmem stuff with available memory */
do_init_bootmem();
sparse_init();
@@ -524,6 +528,11 @@ void __init setup_arch(char **cmdline_p)
if (ppc_md.setup_arch)
ppc_md.setup_arch();
+#ifdef CONFIG_SWIOTLB
+ if (ppc_swiotlb_enable)
+ swiotlb_init();
+#endif
+
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
}
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 48571ac56fb7..bee1443da763 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -109,7 +109,7 @@ static void decrementer_set_mode(enum clock_event_mode mode,
static struct clock_event_device decrementer_clockevent = {
.name = "decrementer",
.rating = 200,
- .shift = 16,
+ .shift = 0, /* To be filled in */
.mult = 0, /* To be filled in */
.irq = 0,
.set_next_event = decrementer_set_next_event,
@@ -843,6 +843,22 @@ static void decrementer_set_mode(enum clock_event_mode mode,
decrementer_set_next_event(DECREMENTER_MAX, dev);
}
+static void __init setup_clockevent_multiplier(unsigned long hz)
+{
+ u64 mult, shift = 32;
+
+ while (1) {
+ mult = div_sc(hz, NSEC_PER_SEC, shift);
+ if (mult && (mult >> 32UL) == 0UL)
+ break;
+
+ shift--;
+ }
+
+ decrementer_clockevent.shift = shift;
+ decrementer_clockevent.mult = mult;
+}
+
static void register_decrementer_clockevent(int cpu)
{
struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
@@ -860,8 +876,7 @@ static void __init init_decrementer_clockevent(void)
{
int cpu = smp_processor_id();
- decrementer_clockevent.mult = div_sc(ppc_tb_freq, NSEC_PER_SEC,
- decrementer_clockevent.shift);
+ setup_clockevent_multiplier(ppc_tb_freq);
decrementer_clockevent.max_delta_ns =
clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
decrementer_clockevent.min_delta_ns =
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 678fbff0d206..6f0ae1a9bfae 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -33,7 +33,9 @@
#include <linux/backlight.h>
#include <linux/bug.h>
#include <linux/kdebug.h>
+#include <linux/debugfs.h>
+#include <asm/emulated_ops.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -757,36 +759,44 @@ static int emulate_instruction(struct pt_regs *regs)
/* Emulate the mfspr rD, PVR. */
if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) {
+ PPC_WARN_EMULATED(mfpvr);
rd = (instword >> 21) & 0x1f;
regs->gpr[rd] = mfspr(SPRN_PVR);
return 0;
}
/* Emulating the dcba insn is just a no-op. */
- if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA)
+ if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) {
+ PPC_WARN_EMULATED(dcba);
return 0;
+ }
/* Emulate the mcrxr insn. */
if ((instword & PPC_INST_MCRXR_MASK) == PPC_INST_MCRXR) {
int shift = (instword >> 21) & 0x1c;
unsigned long msk = 0xf0000000UL >> shift;
+ PPC_WARN_EMULATED(mcrxr);
regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
regs->xer &= ~0xf0000000UL;
return 0;
}
/* Emulate load/store string insn. */
- if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING)
+ if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) {
+ PPC_WARN_EMULATED(string);
return emulate_string_inst(regs, instword);
+ }
/* Emulate the popcntb (Population Count Bytes) instruction. */
if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) {
+ PPC_WARN_EMULATED(popcntb);
return emulate_popcntb_inst(regs, instword);
}
/* Emulate isel (Integer Select) instruction */
if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) {
+ PPC_WARN_EMULATED(isel);
return emulate_isel(regs, instword);
}
@@ -984,6 +994,8 @@ void SoftwareEmulation(struct pt_regs *regs)
#ifdef CONFIG_MATH_EMULATION
errcode = do_mathemu(regs);
+ if (errcode >= 0)
+ PPC_WARN_EMULATED(math);
switch (errcode) {
case 0:
@@ -1005,6 +1017,9 @@ void SoftwareEmulation(struct pt_regs *regs)
#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
errcode = Soft_emulate_8xx(regs);
+ if (errcode >= 0)
+ PPC_WARN_EMULATED(8xx);
+
switch (errcode) {
case 0:
emulate_single_step(regs);
@@ -1026,7 +1041,34 @@ void SoftwareEmulation(struct pt_regs *regs)
void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
{
- if (debug_status & DBSR_IC) { /* instruction completion */
+ /* Hack alert: On BookE, Branch Taken stops on the branch itself, while
+ * on server, it stops on the target of the branch. In order to simulate
+ * the server behaviour, we thus restart right away with a single step
+ * instead of stopping here when hitting a BT
+ */
+ if (debug_status & DBSR_BT) {
+ regs->msr &= ~MSR_DE;
+
+ /* Disable BT */
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_BT);
+ /* Clear the BT event */
+ mtspr(SPRN_DBSR, DBSR_BT);
+
+ /* Do the single step trick only when coming from userspace */
+ if (user_mode(regs)) {
+ current->thread.dbcr0 &= ~DBCR0_BT;
+ current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+ regs->msr |= MSR_DE;
+ return;
+ }
+
+ if (notify_die(DIE_SSTEP, "block_step", regs, 5,
+ 5, SIGTRAP) == NOTIFY_STOP) {
+ return;
+ }
+ if (debugger_sstep(regs))
+ return;
+ } else if (debug_status & DBSR_IC) { /* Instruction complete */
regs->msr &= ~MSR_DE;
/* Disable instruction completion */
@@ -1042,9 +1084,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
if (debugger_sstep(regs))
return;
- if (user_mode(regs)) {
- current->thread.dbcr0 &= ~DBCR0_IC;
- }
+ if (user_mode(regs))
+ current->thread.dbcr0 &= ~(DBCR0_IC);
_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
@@ -1088,6 +1129,7 @@ void altivec_assist_exception(struct pt_regs *regs)
flush_altivec_to_thread(current);
+ PPC_WARN_EMULATED(altivec);
err = emulate_altivec(regs);
if (err == 0) {
regs->nip += 4; /* skip emulated instruction */
@@ -1286,3 +1328,79 @@ void kernel_bad_stack(struct pt_regs *regs)
void __init trap_init(void)
{
}
+
+
+#ifdef CONFIG_PPC_EMULATED_STATS
+
+#define WARN_EMULATED_SETUP(type) .type = { .name = #type }
+
+struct ppc_emulated ppc_emulated = {
+#ifdef CONFIG_ALTIVEC
+ WARN_EMULATED_SETUP(altivec),
+#endif
+ WARN_EMULATED_SETUP(dcba),
+ WARN_EMULATED_SETUP(dcbz),
+ WARN_EMULATED_SETUP(fp_pair),
+ WARN_EMULATED_SETUP(isel),
+ WARN_EMULATED_SETUP(mcrxr),
+ WARN_EMULATED_SETUP(mfpvr),
+ WARN_EMULATED_SETUP(multiple),
+ WARN_EMULATED_SETUP(popcntb),
+ WARN_EMULATED_SETUP(spe),
+ WARN_EMULATED_SETUP(string),
+ WARN_EMULATED_SETUP(unaligned),
+#ifdef CONFIG_MATH_EMULATION
+ WARN_EMULATED_SETUP(math),
+#elif defined(CONFIG_8XX_MINIMAL_FPEMU)
+ WARN_EMULATED_SETUP(8xx),
+#endif
+#ifdef CONFIG_VSX
+ WARN_EMULATED_SETUP(vsx),
+#endif
+};
+
+u32 ppc_warn_emulated;
+
+void ppc_warn_emulated_print(const char *type)
+{
+ if (printk_ratelimit())
+ pr_warning("%s used emulated %s instruction\n", current->comm,
+ type);
+}
+
+static int __init ppc_warn_emulated_init(void)
+{
+ struct dentry *dir, *d;
+ unsigned int i;
+ struct ppc_emulated_entry *entries = (void *)&ppc_emulated;
+
+ if (!powerpc_debugfs_root)
+ return -ENODEV;
+
+ dir = debugfs_create_dir("emulated_instructions",
+ powerpc_debugfs_root);
+ if (!dir)
+ return -ENOMEM;
+
+ d = debugfs_create_u32("do_warn", S_IRUGO | S_IWUSR, dir,
+ &ppc_warn_emulated);
+ if (!d)
+ goto fail;
+
+ for (i = 0; i < sizeof(ppc_emulated)/sizeof(*entries); i++) {
+ d = debugfs_create_u32(entries[i].name, S_IRUGO | S_IWUSR, dir,
+ (u32 *)&entries[i].val.counter);
+ if (!d)
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ debugfs_remove_recursive(dir);
+ return -ENOMEM;
+}
+
+device_initcall(ppc_warn_emulated_init);
+
+#endif /* CONFIG_PPC_EMULATED_STATS */
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 49ac3d6e1399..ef36cbbc5882 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -1,5 +1,215 @@
+#include <asm/processor.h>
#include <asm/ppc_asm.h>
#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+/*
+ * load_up_altivec(unused, unused, tsk)
+ * Disable VMX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ * On SMP we know the VMX is free, since we give it up every
+ * switch (ie, no lazy save of the vector registers).
+ */
+_GLOBAL(load_up_altivec)
+ mfmsr r5 /* grab the current MSR */
+ oris r5,r5,MSR_VEC@h
+ MTMSRD(r5) /* enable use of AltiVec now */
+ isync
+
+/*
+ * For SMP, we don't do lazy VMX switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_altvec in switch_to.
+ * VRSAVE isn't dealt with here, that is done in the normal context
+ * switch code. Note that we could rely on vrsave value to eventually
+ * avoid saving all of the VREGs here...
+ */
+#ifndef CONFIG_SMP
+ LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
+ toreal(r3)
+ PPC_LL r4,ADDROFF(last_task_used_altivec)(r3)
+ PPC_LCMPI 0,r4,0
+ beq 1f
+
+ /* Save VMX state to last_task_used_altivec's THREAD struct */
+ toreal(r4)
+ addi r4,r4,THREAD
+ SAVE_32VRS(0,r5,r4)
+ mfvscr vr0
+ li r10,THREAD_VSCR
+ stvx vr0,r10,r4
+ /* Disable VMX for last_task_used_altivec */
+ PPC_LL r5,PT_REGS(r4)
+ toreal(r5)
+ PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r10,MSR_VEC@h
+ andc r4,r4,r10
+ PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+
+ /* Hack: if we get an altivec unavailable trap with VRSAVE
+ * set to all zeros, we assume this is a broken application
+ * that fails to set it properly, and thus we switch it to
+ * all 1's
+ */
+ mfspr r4,SPRN_VRSAVE
+ cmpdi 0,r4,0
+ bne+ 1f
+ li r4,-1
+ mtspr SPRN_VRSAVE,r4
+1:
+ /* enable use of VMX after return */
+#ifdef CONFIG_PPC32
+ mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ oris r9,r9,MSR_VEC@h
+#else
+ ld r4,PACACURRENT(r13)
+ addi r5,r4,THREAD /* Get THREAD */
+ oris r12,r12,MSR_VEC@h
+ std r12,_MSR(r1)
+#endif
+ li r4,1
+ li r10,THREAD_VSCR
+ stw r4,THREAD_USED_VR(r5)
+ lvx vr0,r10,r5
+ mtvscr vr0
+ REST_32VRS(0,r4,r5)
+#ifndef CONFIG_SMP
+ /* Update last_task_used_math to 'current' */
+ subi r4,r5,THREAD /* Back to 'current' */
+ fromreal(r4)
+ PPC_STL r4,ADDROFF(last_task_used_math)(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+ blr
+
+/*
+ * giveup_altivec(tsk)
+ * Disable VMX for the task given as the argument,
+ * and save the vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ */
+_GLOBAL(giveup_altivec)
+ mfmsr r5
+ oris r5,r5,MSR_VEC@h
+ SYNC
+ MTMSRD(r5) /* enable use of VMX now */
+ isync
+ PPC_LCMPI 0,r3,0
+ beqlr- /* if no previous owner, done */
+ addi r3,r3,THREAD /* want THREAD of task */
+ PPC_LL r5,PT_REGS(r3)
+ PPC_LCMPI 0,r5,0
+ SAVE_32VRS(0,r4,r3)
+ mfvscr vr0
+ li r4,THREAD_VSCR
+ stvx vr0,r4,r3
+ beq 1f
+ PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ lis r3,(MSR_VEC|MSR_VSX)@h
+FTR_SECTION_ELSE
+ lis r3,MSR_VEC@h
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
+#else
+ lis r3,MSR_VEC@h
+#endif
+ andc r4,r4,r3 /* disable FP for previous task */
+ PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+ li r5,0
+ LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
+ PPC_STL r5,ADDROFF(last_task_used_altivec)(r4)
+#endif /* CONFIG_SMP */
+ blr
+
+#ifdef CONFIG_VSX
+
+#ifdef CONFIG_PPC32
+#error This asm code isn't ready for 32-bit kernels
+#endif
+
+/*
+ * load_up_vsx(unused, unused, tsk)
+ * Disable VSX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Reuse the fp and vsx saves, but first check to see if they have
+ * been saved already.
+ */
+_GLOBAL(load_up_vsx)
+/* Load FP and VSX registers if they haven't been done yet */
+ andi. r5,r12,MSR_FP
+ beql+ load_up_fpu /* skip if already loaded */
+ andis. r5,r12,MSR_VEC@h
+ beql+ load_up_altivec /* skip if already loaded */
+
+#ifndef CONFIG_SMP
+ ld r3,last_task_used_vsx@got(r2)
+ ld r4,0(r3)
+ cmpdi 0,r4,0
+ beq 1f
+ /* Disable VSX for last_task_used_vsx */
+ addi r4,r4,THREAD
+ ld r5,PT_REGS(r4)
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r6,MSR_VSX@h
+ andc r6,r4,r6
+ std r6,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ ld r4,PACACURRENT(r13)
+ addi r4,r4,THREAD /* Get THREAD */
+ li r6,1
+ stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
+ /* enable use of VSX after return */
+ oris r12,r12,MSR_VSX@h
+ std r12,_MSR(r1)
+#ifndef CONFIG_SMP
+ /* Update last_task_used_math to 'current' */
+ ld r4,PACACURRENT(r13)
+ std r4,0(r3)
+#endif /* CONFIG_SMP */
+ b fast_exception_return
+
+/*
+ * __giveup_vsx(tsk)
+ * Disable VSX for the task given as the argument.
+ * Does NOT save vsx registers.
+ * Enables the VSX for use in the kernel on return.
+ */
+_GLOBAL(__giveup_vsx)
+ mfmsr r5
+ oris r5,r5,MSR_VSX@h
+ mtmsrd r5 /* enable use of VSX now */
+ isync
+
+ cmpdi 0,r3,0
+ beqlr- /* if no previous owner, done */
+ addi r3,r3,THREAD /* want THREAD of task */
+ ld r5,PT_REGS(r3)
+ cmpdi 0,r5,0
+ beq 1f
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r3,MSR_VSX@h
+ andc r4,r4,r3 /* disable VSX for previous task */
+ std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+ li r5,0
+ ld r4,last_task_used_vsx@got(r2)
+ std r5,0(r4)
+#endif /* CONFIG_SMP */
+ blr
+
+#endif /* CONFIG_VSX */
+
/*
* The routines below are in assembler so we can closely control the
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index b746f4ca4209..c4bcf072cb3c 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -11,10 +11,11 @@ obj-y := fault.o mem.o pgtable.o gup.o \
pgtable_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
tlb_nohash_low.o
-hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o
-obj-$(CONFIG_PPC64) += hash_utils_64.o \
+obj-$(CONFIG_PPC64) += mmap_64.o
+hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o
+obj-$(CONFIG_PPC_STD_MMU_64) += hash_utils_64.o \
slb_low.o slb.o stab.o \
- mmap_64.o $(hash-y)
+ mmap_64.o $(hash64-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_hash$(CONFIG_WORD_SIZE).o \
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 34e5c0b219b9..056d23a1b105 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -27,6 +27,7 @@
#include <asm/cputable.h>
#include <asm/udbg.h>
#include <asm/kexec.h>
+#include <asm/ppc-opcode.h>
#ifdef DEBUG_LOW
#define DBG_LOW(fmt...) udbg_printf(fmt)
@@ -49,14 +50,21 @@ static inline void __tlbie(unsigned long va, int psize, int ssize)
case MMU_PAGE_4K:
va &= ~0xffful;
va |= ssize << 8;
- asm volatile("tlbie %0,0" : : "r" (va) : "memory");
+ asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,0", PPC_TLBIE(%1,%0),
+ %2)
+ : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+ : "memory");
break;
default:
penc = mmu_psize_defs[psize].penc;
va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
va |= penc << 12;
va |= ssize << 8;
- asm volatile("tlbie %0,1" : : "r" (va) : "memory");
+ va |= 1; /* L */
+ asm volatile(ASM_MMU_FTR_IFCLR("tlbie %0,1", PPC_TLBIE(%1,%0),
+ %2)
+ : : "r" (va), "r"(0), "i" (MMU_FTR_TLBIE_206)
+ : "memory");
break;
}
}
@@ -80,6 +88,7 @@ static inline void __tlbiel(unsigned long va, int psize, int ssize)
va &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
va |= penc << 12;
va |= ssize << 8;
+ va |= 1; /* L */
asm volatile(".long 0x7c000224 | (%0 << 11) | (1 << 21)"
: : "r"(va) : "memory");
break;
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 3e6a6543f53a..68a821add28d 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -66,6 +66,7 @@
#include "mmu_decl.h"
+#ifdef CONFIG_PPC_STD_MMU_64
#if PGTABLE_RANGE > USER_VSID_RANGE
#warning Limited user VSID range means pagetable space is wasted
#endif
@@ -73,6 +74,7 @@
#if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
#warning TASK_SIZE is smaller than it needs to be.
#endif
+#endif /* CONFIG_PPC_STD_MMU_64 */
phys_addr_t memstart_addr = ~0;
phys_addr_t kernstart_addr;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 030d0005b4d2..8343986809c0 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -46,7 +46,7 @@ static unsigned int next_context, nr_free_contexts;
static unsigned long *context_map;
static unsigned long *stale_map[NR_CPUS];
static struct mm_struct **context_mm;
-static spinlock_t context_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(context_lock);
#define CTX_MAP_SIZE \
(sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
@@ -73,7 +73,6 @@ static unsigned int steal_context_smp(unsigned int id)
struct mm_struct *mm;
unsigned int cpu, max;
- again:
max = last_context - first_context;
/* Attempt to free next_context first and then loop until we manage */
@@ -108,7 +107,9 @@ static unsigned int steal_context_smp(unsigned int id)
spin_unlock(&context_lock);
cpu_relax();
spin_lock(&context_lock);
- goto again;
+
+ /* This will cause the caller to try again */
+ return MMU_NO_CONTEXT;
}
#endif /* CONFIG_SMP */
@@ -194,6 +195,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
WARN_ON(prev->context.active < 1);
prev->context.active--;
}
+
+ again:
#endif /* CONFIG_SMP */
/* If we already have a valid assigned context, skip all that */
@@ -212,7 +215,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
id = steal_context_smp(id);
- goto stolen;
+ if (id == MMU_NO_CONTEXT)
+ goto again;
}
#endif /* CONFIG_SMP */
id = steal_context_up(id);
@@ -272,6 +276,7 @@ int init_new_context(struct task_struct *t, struct mm_struct *mm)
*/
void destroy_context(struct mm_struct *mm)
{
+ unsigned long flags;
unsigned int id;
if (mm->context.id == MMU_NO_CONTEXT)
@@ -279,18 +284,18 @@ void destroy_context(struct mm_struct *mm)
WARN_ON(mm->context.active != 0);
- spin_lock(&context_lock);
+ spin_lock_irqsave(&context_lock, flags);
id = mm->context.id;
if (id != MMU_NO_CONTEXT) {
__clear_bit(id, context_map);
mm->context.id = MMU_NO_CONTEXT;
#ifdef DEBUG_MAP_CONSISTENCY
mm->context.active = 0;
- context_mm[id] = NULL;
#endif
+ context_mm[id] = NULL;
nr_free_contexts++;
}
- spin_unlock(&context_lock);
+ spin_unlock_irqrestore(&context_lock, flags);
}
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 9047145095aa..b037d95eeadc 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -981,6 +981,8 @@ void __init do_init_bootmem(void)
mark_reserved_regions_for_nid(nid);
sparse_memory_present_with_active_regions(nid);
}
+
+ init_bootmem_done = 1;
}
void __init paging_init(void)
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
index 91596f6ba1f4..62312abffa28 100644
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ b/arch/powerpc/oprofile/op_model_fsl_emb.c
@@ -228,20 +228,6 @@ static void pmc_stop_ctrs(void)
mtpmr(PMRN_PMGC0, pmgc0);
}
-static void dump_pmcs(void)
-{
- printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0));
- printk("pmc\t\tpmlca\t\tpmlcb\n");
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0),
- mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0));
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1),
- mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1));
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2),
- mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2));
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3),
- mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
-}
-
static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
{
int i;
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index f39c953d5353..a6e43cb6f825 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -45,6 +45,7 @@ config KILAUEA
depends on 40x
default n
select 405EX
+ select PPC40x_SIMPLE
select PPC4xx_PCI_EXPRESS
help
This option enables support for the AMCC PPC405EX evaluation board.
@@ -56,6 +57,7 @@ config MAKALU
select 405EX
select PCI
select PPC4xx_PCI_EXPRESS
+ select PPC40x_SIMPLE
help
This option enables support for the AMCC PPC405EX board.
diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
index 9bab76a652a6..56e89004c468 100644
--- a/arch/powerpc/platforms/40x/Makefile
+++ b/arch/powerpc/platforms/40x/Makefile
@@ -1,6 +1,4 @@
-obj-$(CONFIG_KILAUEA) += kilauea.o
obj-$(CONFIG_HCU4) += hcu4.o
-obj-$(CONFIG_MAKALU) += makalu.o
obj-$(CONFIG_WALNUT) += walnut.o
obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o
obj-$(CONFIG_EP405) += ep405.o
diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
deleted file mode 100644
index fd7d934dac8b..000000000000
--- a/arch/powerpc/platforms/40x/kilauea.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Kilauea board specific routines
- *
- * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Walnut code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id kilauea_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init kilauea_device_probe(void)
-{
- of_platform_bus_probe(NULL, kilauea_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(kilauea, kilauea_device_probe);
-
-static int __init kilauea_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,kilauea"))
- return 0;
-
- ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
-
- return 1;
-}
-
-define_machine(kilauea) {
- .name = "Kilauea",
- .probe = kilauea_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c
deleted file mode 100644
index a6a1d6017b71..000000000000
--- a/arch/powerpc/platforms/40x/makalu.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Makalu board specific routines
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * Based on the Walnut code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright 2007 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id makalu_of_bus[] = {
- { .compatible = "ibm,plb4", },
- { .compatible = "ibm,opb", },
- { .compatible = "ibm,ebc", },
- {},
-};
-
-static int __init makalu_device_probe(void)
-{
- of_platform_bus_probe(NULL, makalu_of_bus, NULL);
-
- return 0;
-}
-machine_device_initcall(makalu, makalu_device_probe);
-
-static int __init makalu_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- if (!of_flat_dt_is_compatible(root, "amcc,makalu"))
- return 0;
-
- ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
-
- return 1;
-}
-
-define_machine(makalu) {
- .name = "Makalu",
- .probe = makalu_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc4xx_reset_system,
- .calibrate_decr = generic_calibrate_decr,
-};
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index f40ac9b8f99f..5fd5a5974001 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -51,7 +51,10 @@ machine_device_initcall(ppc40x_simple, ppc40x_device_probe);
* board.c file for it rather than adding it to this list.
*/
static char *board[] __initdata = {
- "amcc,acadia"
+ "amcc,acadia",
+ "amcc,haleakala",
+ "amcc,kilauea",
+ "amcc,makalu"
};
static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index fc7fb001276c..d0fc6866b00c 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -14,6 +14,7 @@
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
#include <asm/ppc4xx.h>
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
@@ -47,6 +48,7 @@ static int __init virtex_probe(void)
define_machine(virtex) {
.name = "Xilinx Virtex",
.probe = virtex_probe,
+ .setup_arch = xilinx_pci_init,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
.restart = ppc4xx_reset_system,
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 0d83a6a0397d..90e3192611a4 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -156,7 +156,7 @@ config YOSEMITE
# This option enables support for the IBM PPC440GX evaluation board.
config XILINX_VIRTEX440_GENERIC_BOARD
- bool "Generic Xilinx Virtex 440 board"
+ bool "Generic Xilinx Virtex 5 FXT board support"
depends on 44x
default n
select XILINX_VIRTEX_5_FXT
@@ -171,6 +171,17 @@ config XILINX_VIRTEX440_GENERIC_BOARD
Most Virtex 5 designs should use this unless it needs to do some
special configuration at board probe time.
+config XILINX_ML510
+ bool "Xilinx ML510 extra support"
+ depends on XILINX_VIRTEX440_GENERIC_BOARD
+ select PPC_PCI_CHOICE
+ select XILINX_PCI if PCI
+ select PPC_INDIRECT_PCI if PCI
+ select PPC_I8259 if PCI
+ help
+ This option enables extra support for features on the Xilinx ML510
+ board. The ML510 has a PCI bus with ALI south bridge.
+
config PPC44x_SIMPLE
bool "Simple PowerPC 44x board support"
depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 01f51daace13..ee6185aeaa3b 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_SAM440EP) += sam440ep.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c
index 68637faf70ae..cf96ccaa760c 100644
--- a/arch/powerpc/platforms/44x/virtex.c
+++ b/arch/powerpc/platforms/44x/virtex.c
@@ -16,6 +16,7 @@
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include <asm/xilinx_pci.h>
#include <asm/reg.h>
#include <asm/ppc4xx.h>
#include "44x.h"
@@ -53,6 +54,7 @@ static int __init virtex_probe(void)
define_machine(virtex) {
.name = "Xilinx Virtex440",
.probe = virtex_probe,
+ .setup_arch = xilinx_pci_init,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
.calibrate_decr = generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/44x/virtex_ml510.c b/arch/powerpc/platforms/44x/virtex_ml510.c
new file mode 100644
index 000000000000..ba4a6e388a46
--- /dev/null
+++ b/arch/powerpc/platforms/44x/virtex_ml510.c
@@ -0,0 +1,29 @@
+#include <asm/i8259.h>
+#include <linux/pci.h>
+#include "44x.h"
+
+/**
+ * ml510_ail_quirk
+ */
+static void __devinit ml510_ali_quirk(struct pci_dev *dev)
+{
+ /* Enable the IDE controller */
+ pci_write_config_byte(dev, 0x58, 0x4c);
+ /* Assign irq 14 to the primary ide channel */
+ pci_write_config_byte(dev, 0x44, 0x0d);
+ /* Assign irq 15 to the secondary ide channel */
+ pci_write_config_byte(dev, 0x75, 0x0f);
+ /* Set the ide controller in native mode */
+ pci_write_config_byte(dev, 0x09, 0xff);
+
+ /* INTB = disabled, INTA = disabled */
+ pci_write_config_byte(dev, 0x48, 0x00);
+ /* INTD = disabled, INTC = disabled */
+ pci_write_config_byte(dev, 0x4a, 0x00);
+ /* Audio = INT7, Modem = disabled. */
+ pci_write_config_byte(dev, 0x4b, 0x60);
+ /* USB = INT7 */
+ pci_write_config_byte(dev, 0x74, 0x06);
+}
+DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ml510_ali_quirk);
+
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 960edf89be51..c5118802a281 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -1,7 +1,7 @@
/*
* PIKA Warp(tm) board specific routines
*
- * Copyright (c) 2008 PIKA Technologies
+ * Copyright (c) 2008-2009 PIKA Technologies
* Sean MacLennan <smaclennan@pikatech.com>
*
* This program is free software; you can redistribute it and/or modify it
@@ -15,6 +15,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/of_gpio.h>
#include <asm/machdep.h>
#include <asm/prom.h>
@@ -23,6 +24,7 @@
#include <asm/uic.h>
#include <asm/ppc4xx.h>
+
static __initdata struct of_device_id warp_of_bus[] = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
@@ -55,6 +57,8 @@ define_machine(warp) {
};
+static u32 post_info;
+
/* I am not sure this is the best place for this... */
static int __init warp_post_info(void)
{
@@ -77,21 +81,21 @@ static int __init warp_post_info(void)
iounmap(fpga);
- if (post1 || post2)
+ if (post1 || post2) {
printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
- else
+ post_info = 1;
+ } else
printk(KERN_INFO "Warp POST OK\n");
return 0;
}
-machine_late_initcall(warp, warp_post_info);
#ifdef CONFIG_SENSORS_AD7414
static LIST_HEAD(dtm_shutdown_list);
static void __iomem *dtm_fpga;
-static void __iomem *gpio_base;
+static unsigned green_led, red_led;
struct dtm_shutdown {
@@ -134,14 +138,17 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
static irqreturn_t temp_isr(int irq, void *context)
{
struct dtm_shutdown *shutdown;
+ int value = 1;
local_irq_disable();
+ gpio_set_value(green_led, 0);
+
/* Run through the shutdown list. */
list_for_each_entry(shutdown, &dtm_shutdown_list, list)
shutdown->func(shutdown->arg);
- printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+ printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n");
while (1) {
if (dtm_fpga) {
@@ -149,52 +156,34 @@ static irqreturn_t temp_isr(int irq, void *context)
out_be32(dtm_fpga + 0x14, reset);
}
- if (gpio_base) {
- unsigned leds = in_be32(gpio_base);
-
- /* green off, red toggle */
- leds &= ~0x80000000;
- leds ^= 0x40000000;
-
- out_be32(gpio_base, leds);
- }
-
+ gpio_set_value(red_led, value);
+ value ^= 1;
mdelay(500);
}
}
static int pika_setup_leds(void)
{
- struct device_node *np;
- const u32 *gpios;
- int len;
+ struct device_node *np, *child;
- np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+ np = of_find_compatible_node(NULL, NULL, "gpio-leds");
if (!np) {
- printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
- return -ENOENT;
- }
-
- gpios = of_get_property(np, "gpios", &len);
- of_node_put(np);
- if (!gpios || len < 4) {
- printk(KERN_ERR __FILE__
- ": Unable to get gpios property (%d)\n", len);
+ printk(KERN_ERR __FILE__ ": Unable to find leds\n");
return -ENOENT;
}
- np = of_find_node_by_phandle(gpios[0]);
- if (!np) {
- printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
- return -ENOENT;
- }
+ for_each_child_of_node(np, child)
+ if (strcmp(child->name, "green") == 0) {
+ green_led = of_get_gpio(child, 0);
+ /* Turn back on the green LED */
+ gpio_set_value(green_led, 1);
+ } else if (strcmp(child->name, "red") == 0) {
+ red_led = of_get_gpio(child, 0);
+ /* Set based on post */
+ gpio_set_value(red_led, post_info);
+ }
- gpio_base = of_iomap(np, 0);
of_node_put(np);
- if (!gpio_base) {
- printk(KERN_ERR __FILE__ ": Unable to map gpio");
- return -ENOMEM;
- }
return 0;
}
@@ -270,10 +259,10 @@ static int pika_dtm_thread(void __iomem *fpga)
}
found_it:
- i2c_put_adapter(adap);
-
pika_setup_critical_temp(client);
+ i2c_put_adapter(adap);
+
printk(KERN_INFO "PIKA DTM thread running.\n");
while (!kthread_should_stop()) {
@@ -311,6 +300,9 @@ static int __init pika_dtm_start(void)
if (dtm_fpga == NULL)
return -ENOENT;
+ /* Must get post info before thread starts. */
+ warp_post_info();
+
dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
if (IS_ERR(dtm_thread)) {
iounmap(dtm_fpga);
@@ -333,6 +325,8 @@ int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
return 0;
}
+machine_late_initcall(warp, warp_post_info);
+
#endif
EXPORT_SYMBOL(pika_dtm_register_shutdown);
diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
index a2068faef6ea..bcc69e1f77c1 100644
--- a/arch/powerpc/platforms/52xx/efika.c
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -34,7 +34,7 @@
static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 * val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
| (((bus->number - hose->first_busno) & 0xff) << 16)
| (hose->global_number << 24);
@@ -49,7 +49,7 @@ static int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
| (((bus->number - hose->first_busno) & 0xff) << 16)
| (hose->global_number << 24);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 87ff522f28b5..dd43114e9684 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -107,7 +107,7 @@ static int
mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
u32 value;
if (ppc_md.pci_exclude_device)
@@ -164,7 +164,7 @@ static int
mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
u32 value, mask;
if (ppc_md.pci_exclude_device)
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
index 984db42cc8e7..6cf0f97486e2 100644
--- a/arch/powerpc/platforms/82xx/pq2ads.h
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -24,10 +24,6 @@
#include <linux/seq_file.h>
-/* Backword-compatibility stuff for the drivers */
-#define CPM_MAP_ADDR ((uint)0xf0000000)
-#define CPM_IRQ_OFFSET 0
-
/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
* only on word boundaries.
* Not all are used (yet), or are interesting to us (yet).
@@ -44,14 +40,5 @@
#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/
#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
-/* cpm serial driver works with constants below */
-
-#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
-#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
-
#endif /* __MACH_ADS8260_DEFS */
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7f066adc068c..43d385cedcd7 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -34,6 +34,7 @@ config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
select PHYLIB
+ select HAS_RAPIDIO
help
This option enables support for the MPC85xx MDS board
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index de66de7a9ca2..53d5851a6c97 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -163,7 +163,8 @@ static void __init mpc85xx_ds_setup_arch(void)
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
- of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+ of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+ of_device_is_compatible(np, "fsl,p2020-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == primary_phb_addr)
@@ -195,9 +196,9 @@ static int __init mpc8544_ds_probe(void)
primary_phb_addr = 0xb000;
#endif
return 1;
- } else {
- return 0;
}
+
+ return 0;
}
static struct of_device_id __initdata mpc85xxds_ids[] = {
@@ -214,6 +215,7 @@ static int __init mpc85xxds_publish_devices(void)
}
machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
/*
* Called very early, device-tree isn't unflattened
@@ -227,9 +229,26 @@ static int __init mpc8572_ds_probe(void)
primary_phb_addr = 0x8000;
#endif
return 1;
- } else {
- return 0;
}
+
+ return 0;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2020_ds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
+#ifdef CONFIG_PCI
+ primary_phb_addr = 0x9000;
+#endif
+ return 1;
+ }
+
+ return 0;
}
define_machine(mpc8544_ds) {
@@ -259,3 +278,17 @@ define_machine(mpc8572_ds) {
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p2020_ds) {
+ .name = "P2020 DS",
+ .probe = p2020_ds_probe,
+ .setup_arch = mpc85xx_ds_setup_arch,
+ .init_IRQ = mpc85xx_ds_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 7dd029034aec..b2c0a4319973 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -206,23 +206,24 @@ static void __init mpc85xx_mds_setup_arch(void)
}
if (bcsr_regs) {
+ if (machine_is(mpc8568_mds)) {
#define BCSR_UCC1_GETH_EN (0x1 << 7)
#define BCSR_UCC2_GETH_EN (0x1 << 7)
#define BCSR_UCC1_MODE_MSK (0x3 << 4)
#define BCSR_UCC2_MODE_MSK (0x3 << 0)
- /* Turn off UCC1 & UCC2 */
- clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
- clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+ /* Turn off UCC1 & UCC2 */
+ clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+ clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
- /* Mode is RGMII, all bits clear */
- clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
- BCSR_UCC2_MODE_MSK);
-
- /* Turn UCC1 & UCC2 on */
- setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
- setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+ /* Mode is RGMII, all bits clear */
+ clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
+ BCSR_UCC2_MODE_MSK);
+ /* Turn UCC1 & UCC2 on */
+ setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+ setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+ }
iounmap(bcsr_regs);
}
#endif /* CONFIG_QUICC_ENGINE */
@@ -257,7 +258,8 @@ static int __init board_fixups(void)
return 0;
}
-machine_arch_initcall(mpc85xx_mds, board_fixups);
+machine_arch_initcall(mpc8568_mds, board_fixups);
+machine_arch_initcall(mpc8569_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
@@ -276,7 +278,8 @@ static int __init mpc85xx_publish_devices(void)
return 0;
}
-machine_device_initcall(mpc85xx_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
static void __init mpc85xx_mds_pic_init(void)
{
@@ -321,8 +324,8 @@ static int __init mpc85xx_mds_probe(void)
return of_flat_dt_is_compatible(root, "MPC85xxMDS");
}
-define_machine(mpc85xx_mds) {
- .name = "MPC85xx MDS",
+define_machine(mpc8568_mds) {
+ .name = "MPC8568 MDS",
.probe = mpc85xx_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
@@ -334,3 +337,24 @@ define_machine(mpc85xx_mds) {
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
+
+static int __init mpc8569_mds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
+}
+
+define_machine(mpc8569_mds) {
+ .name = "MPC8569 MDS",
+ .probe = mpc8569_mds_probe,
+ .setup_arch = mpc85xx_mds_setup_arch,
+ .init_IRQ = mpc85xx_mds_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index d79104669cdc..2efa052975e6 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -28,7 +28,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index af14f852d747..90754e752bd8 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -28,7 +28,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index ea2360639652..72b31a6010a0 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -28,7 +28,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 3f49a6f893a3..51eec0cd5519 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -28,7 +28,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index c4ec49b5f7f8..7e9e83c04a8a 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -24,7 +24,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index 014e26cda08d..d84bbb508ee7 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -20,7 +20,6 @@
#include <asm/pgtable.h>
#include <asm/pci-bridge.h>
#include <asm/mpic.h>
-#include <asm/mpc86xx.h>
#include <asm/cacheflush.h>
#include <sysdev/fsl_soc.h>
@@ -30,6 +29,11 @@
extern void __secondary_start_mpc86xx(void);
extern unsigned long __secondary_hold_acknowledge;
+#define MCM_PORT_CONFIG_OFFSET 0x10
+
+/* Offset from CCSRBAR */
+#define MPC86xx_MCM_OFFSET (0x1000)
+#define MPC86xx_MCM_SIZE (0x1000)
static void __init
smp_86xx_release_core(int nr)
@@ -48,6 +52,8 @@ smp_86xx_release_core(int nr)
pcr = in_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2));
pcr |= 1 << (nr + 24);
out_be32(mcm_vaddr + (MCM_PORT_CONFIG_OFFSET >> 2), pcr);
+
+ iounmap(mcm_vaddr);
}
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 2886a36fc085..51c8f331b671 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -25,7 +25,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
-#include <asm/mpc86xx.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index a5076668bad6..19412f76fa3b 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -17,10 +17,6 @@
#include <sysdev/fsl_soc.h>
-#define MPC8xx_CPM_OFFSET (0x9c0)
-#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET)
-#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver
-
/* Bits of interest in the BCSRs.
*/
#define BCSR1_ETHEN ((uint)0x20000000)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index e3e87078d03f..04a8061045c4 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -329,4 +329,8 @@ config MCU_MPC8349EMITX
also register MCU GPIOs with the generic GPIO API, so you'll able
to use MCU pins as GPIOs.
+config XILINX_PCI
+ bool "Xilinx PCI host bridge support"
+ depends on PCI && XILINX_VIRTEX
+
endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 732ee93a8e98..cca6b4fc719a 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -10,7 +10,6 @@ menu "Processor support"
choice
prompt "Processor Type"
depends on PPC32
- default 6xx
help
There are five families of 32 bit PowerPC chips supported.
The most common ones are the desktop and server CPUs (601, 603,
@@ -22,7 +21,7 @@ choice
If unsure, select 52xx/6xx/7xx/74xx/82xx/83xx/86xx.
-config 6xx
+config PPC_BOOK3S
bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
select PPC_FPU
@@ -58,13 +57,11 @@ config E200
endchoice
-# Until we have a choice of exclusive CPU types on 64-bit, we always
-# use PPC_BOOK3S. On 32-bit, this is equivalent to 6xx which is
-# "classic" MMU
-
config PPC_BOOK3S
- def_bool y
- depends on PPC64 || 6xx
+ default y
+ depends on PPC64
+ select PPC_FPU
+
config POWER4_ONLY
bool "Optimize for POWER4"
@@ -75,6 +72,10 @@ config POWER4_ONLY
The resulting binary will not work on POWER3 or RS64 processors
when compiled with binutils 2.15 or later.
+config 6xx
+ def_bool y
+ depends on PPC32 && PPC_BOOK3S
+
config POWER3
bool
depends on PPC64 && PPC_BOOK3S
@@ -203,9 +204,8 @@ config SPE
If in doubt, say Y here.
config PPC_STD_MMU
- bool
- depends on 6xx || PPC64
- default y
+ def_bool y
+ depends on PPC_BOOK3S
config PPC_STD_MMU_32
def_bool y
@@ -263,8 +263,8 @@ config SMP
If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-1024)"
- range 2 1024
+ int "Maximum number of CPUs (2-8192)"
+ range 2 8192
depends on SMP
default "32" if PPC64
default "4"
diff --git a/arch/powerpc/platforms/cell/celleb_pci.c b/arch/powerpc/platforms/cell/celleb_pci.c
index f39a3b2a1667..00eaaa71630f 100644
--- a/arch/powerpc/platforms/cell/celleb_pci.c
+++ b/arch/powerpc/platforms/cell/celleb_pci.c
@@ -162,8 +162,7 @@ static int celleb_fake_pci_read_config(struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 *val)
{
char *config;
- struct device_node *node;
- struct pci_controller *hose;
+ struct pci_controller *hose = pci_bus_to_host(bus);
unsigned int devno = devfn >> 3;
unsigned int fn = devfn & 0x7;
@@ -171,8 +170,6 @@ static int celleb_fake_pci_read_config(struct pci_bus *bus,
BUG_ON(where % size);
pr_debug(" fake read: bus=0x%x, ", bus->number);
- node = (struct device_node *)bus->sysdata;
- hose = pci_find_hose_for_OF_device(node);
config = get_fake_config_start(hose, devno, fn);
pr_debug("devno=0x%x, where=0x%x, size=0x%x, ", devno, where, size);
@@ -192,8 +189,7 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus,
unsigned int devfn, int where, int size, u32 val)
{
char *config;
- struct device_node *node;
- struct pci_controller *hose;
+ struct pci_controller *hose = pci_bus_to_host(bus);
struct celleb_pci_resource *res;
unsigned int devno = devfn >> 3;
unsigned int fn = devfn & 0x7;
@@ -201,8 +197,6 @@ static int celleb_fake_pci_write_config(struct pci_bus *bus,
/* allignment check */
BUG_ON(where % size);
- node = (struct device_node *)bus->sysdata;
- hose = pci_find_hose_for_OF_device(node);
config = get_fake_config_start(hose, devno, fn);
if (!config)
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c
index 48ec88a38a12..05b0db3ef638 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_epci.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c
@@ -134,15 +134,11 @@ static int celleb_epci_read_config(struct pci_bus *bus,
{
PCI_IO_ADDR epci_base;
PCI_IO_ADDR addr;
- struct device_node *node;
- struct pci_controller *hose;
+ struct pci_controller *hose = pci_bus_to_host(bus);
/* allignment check */
BUG_ON(where % size);
- node = (struct device_node *)bus->sysdata;
- hose = pci_find_hose_for_OF_device(node);
-
if (!celleb_epci_get_epci_cfg(hose))
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -198,16 +194,11 @@ static int celleb_epci_write_config(struct pci_bus *bus,
{
PCI_IO_ADDR epci_base;
PCI_IO_ADDR addr;
- struct device_node *node;
- struct pci_controller *hose;
+ struct pci_controller *hose = pci_bus_to_host(bus);
/* allignment check */
BUG_ON(where % size);
- node = (struct device_node *)bus->sysdata;
- hose = pci_find_hose_for_OF_device(node);
-
-
if (!celleb_epci_get_epci_cfg(hose))
return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 3e7e0f1568ef..7fca09f990ba 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -366,11 +366,7 @@ static void config_write_pciex_rc(unsigned int __iomem *base, uint32_t where,
static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, unsigned int *val)
{
- struct device_node *dn;
- struct pci_controller *phb;
-
- dn = bus->sysdata;
- phb = pci_find_hose_for_OF_device(dn);
+ struct pci_controller *phb = pci_bus_to_host(bus);
if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1) {
*val = ~0;
@@ -389,11 +385,7 @@ static int scc_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
static int scc_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, unsigned int val)
{
- struct device_node *dn;
- struct pci_controller *phb;
-
- dn = bus->sysdata;
- phb = pci_find_hose_for_OF_device(dn);
+ struct pci_controller *phb = pci_bus_to_host(bus);
if (bus->number == phb->first_busno && PCI_SLOT(devfn) != 1)
return PCIBIOS_DEVICE_NOT_FOUND;
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 706eb5c7e2ee..24b30b6909c4 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -631,10 +631,6 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
if (IS_ERR(dentry))
goto out_dir;
- ret = -EEXIST;
- if (dentry->d_inode)
- goto out_dput;
-
mode &= ~current_umask();
if (flags & SPU_CREATE_GANG)
@@ -648,8 +644,6 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
fsnotify_mkdir(nd->path.dentry->d_inode, dentry);
return ret;
-out_dput:
- dput(dentry);
out_dir:
mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
out:
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index f6b0c519d5a2..8f67a394b2d0 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -34,7 +34,7 @@ int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
int len, u32 *val)
{
volatile void __iomem *cfg_data;
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
if (bus->number > 7)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -61,7 +61,7 @@ int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
int len, u32 val)
{
volatile void __iomem *cfg_data;
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
if (bus->number > 7)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -96,7 +96,7 @@ static struct pci_ops gg2_pci_ops =
int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 *val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
| (((bus->number - hose->first_busno) & 0xff) << 16)
| (hose->global_number << 24);
@@ -111,7 +111,7 @@ int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
| (((bus->number - hose->first_busno) & 0xff) << 16)
| (hose->global_number << 24);
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 65a35f38e062..fd23a1d4b39d 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,13 +51,20 @@ u8 uli_pirq_to_irq[8] = {
ULI_8259_NONE, /* PIRQH */
};
+static inline bool is_quirk_valid(void)
+{
+ return (machine_is(mpc86xx_hpcn) ||
+ machine_is(mpc8544_ds) ||
+ machine_is(p2020_ds) ||
+ machine_is(mpc8572_ds));
+}
+
/* Bridge */
static void __devinit early_uli5249(struct pci_dev *dev)
{
unsigned char temp;
- if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
- !machine_is(mpc8572_ds))
+ if (!is_quirk_valid())
return;
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -80,8 +87,7 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
{
int i;
- if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
- !machine_is(mpc8572_ds))
+ if (!is_quirk_valid())
return;
/*
@@ -149,8 +155,7 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
* IRQ 14: Edge
* IRQ 15: Edge
*/
- if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
- !machine_is(mpc8572_ds))
+ if (!is_quirk_valid())
return;
outb(0xfa, 0x4d0);
@@ -176,8 +181,7 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
unsigned char c;
unsigned int d;
- if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
- !machine_is(mpc8572_ds))
+ if (!is_quirk_valid())
return;
/* read/write lock */
@@ -201,8 +205,7 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
{
unsigned short temp;
- if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
- !machine_is(mpc8572_ds))
+ if (!is_quirk_valid())
return;
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -270,7 +273,6 @@ static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
{
unsigned char c;
- unsigned short temp;
if (!machine_is(mpc86xx_hpcd))
return;
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 40219823d9b0..6c1e1011959e 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -177,7 +177,7 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
{
struct iommu_table *tbl;
- struct device_node *dn = pdev->sysdata;
+ struct device_node *dn = pci_device_to_OF_node(pdev);
struct pci_dn *pdn = PCI_DN(dn);
const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 21cddc30220b..175aac8ca7e5 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -318,6 +318,7 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
{
struct resource *bar_res = &dev->resource[bar_num];
long bar_size = pci_resource_len(dev, bar_num);
+ struct device_node *dn = pci_device_to_OF_node(dev);
/*
* No space to allocate, quick exit, skip Allocation.
@@ -335,9 +336,9 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
* Allocate the number of table entries needed for BAR.
*/
while (bar_size > 0 ) {
- iomm_table[current_iomm_table_entry] = dev->sysdata;
+ iomm_table[current_iomm_table_entry] = dn;
ds_addr_table[current_iomm_table_entry] =
- iseries_ds_addr(dev->sysdata) | (bar_num << 24);
+ iseries_ds_addr(dn) | (bar_num << 24);
bar_size -= IOMM_TABLE_ENTRY_SIZE;
++current_iomm_table_entry;
}
@@ -410,7 +411,7 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
struct device_node *node;
int i;
- node = find_device_node(bus, pdev->devfn);
+ node = pci_device_to_OF_node(pdev);
pr_debug("PCI: iSeries %s, pdev %p, node %p\n",
pci_name(pdev), pdev, node);
if (!node) {
@@ -441,7 +442,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
}
}
- pdev->sysdata = node;
allocate_device_bars(pdev);
iseries_device_information(pdev, bus, *sub_bus);
}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 7039d8f1d3ba..dce736349107 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -221,7 +221,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
continue;
irq += __ilog2(bits);
spin_unlock_irqrestore(&pmac_pic_lock, flags);
- __do_IRQ(irq);
+ generic_handle_irq(irq);
spin_lock_irqsave(&pmac_pic_lock, flags);
rc = IRQ_HANDLED;
}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 45936c9ed0ec..86f69a4eb49b 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -655,7 +655,7 @@ static int __init pmac_probe(void)
/* Move that to pci.c */
static int pmac_pci_probe_mode(struct pci_bus *bus)
{
- struct device_node *node = bus->sysdata;
+ struct device_node *node = pci_bus_to_OF_node(bus);
/* We need to use normal PCI probing for the AGP bus,
* since the device for the AGP bridge isn't in the tree.
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index a0927a3bacb7..f6e04bcc70ef 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -32,12 +32,6 @@
#define DBG pr_debug
#endif
-static irqreturn_t ipi_function_handler(int irq, void *msg)
-{
- smp_message_recv((int)(long)msg);
- return IRQ_HANDLED;
-}
-
/**
* ps3_ipi_virqs - a per cpu array of virqs for ipi use
*/
@@ -45,13 +39,6 @@ static irqreturn_t ipi_function_handler(int irq, void *msg)
#define MSG_COUNT 4
static DEFINE_PER_CPU(unsigned int, ps3_ipi_virqs[MSG_COUNT]);
-static const char *names[MSG_COUNT] = {
- "ipi call",
- "ipi reschedule",
- "ipi migrate",
- "ipi debug brk"
-};
-
static void do_message_pass(int target, int msg)
{
int result;
@@ -119,8 +106,7 @@ static void __init ps3_smp_setup_cpu(int cpu)
DBG("%s:%d: (%d, %d) => virq %u\n",
__func__, __LINE__, cpu, i, virqs[i]);
- result = request_irq(virqs[i], ipi_function_handler,
- IRQF_DISABLED, names[i], (void*)(long)i);
+ result = smp_request_message_ipi(virqs[i], i);
if (result)
virqs[i] = NO_IRQ;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 3ee01b4f4257..661c8e02bcba 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -388,7 +388,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
while (pci->phb->dma_window_size * children > 0x80000000ul)
pci->phb->dma_window_size >>= 1;
- pr_debug("No ISA/IDE, window size is 0x%lx\n",
+ pr_debug("No ISA/IDE, window size is 0x%llx\n",
pci->phb->dma_window_size);
pci->phb->dma_window_base_cur = 0;
@@ -414,7 +414,7 @@ static void pci_dma_bus_setup_pSeries(struct pci_bus *bus)
while (pci->phb->dma_window_size * children > 0x70000000ul)
pci->phb->dma_window_size >>= 1;
- pr_debug("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size);
+ pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size);
}
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 52a80e5840e8..e3139fa5e556 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -609,3 +609,55 @@ void __init hpte_init_lpar(void)
ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range;
ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear;
}
+
+#ifdef CONFIG_PPC_SMLPAR
+#define CMO_FREE_HINT_DEFAULT 1
+static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT;
+
+static int __init cmo_free_hint(char *str)
+{
+ char *parm;
+ parm = strstrip(str);
+
+ if (strcasecmp(parm, "no") == 0 || strcasecmp(parm, "off") == 0) {
+ printk(KERN_INFO "cmo_free_hint: CMO free page hinting is not active.\n");
+ cmo_free_hint_flag = 0;
+ return 1;
+ }
+
+ cmo_free_hint_flag = 1;
+ printk(KERN_INFO "cmo_free_hint: CMO free page hinting is active.\n");
+
+ if (strcasecmp(parm, "yes") == 0 || strcasecmp(parm, "on") == 0)
+ return 1;
+
+ return 0;
+}
+
+__setup("cmo_free_hint=", cmo_free_hint);
+
+static void pSeries_set_page_state(struct page *page, int order,
+ unsigned long state)
+{
+ int i, j;
+ unsigned long cmo_page_sz, addr;
+
+ cmo_page_sz = cmo_get_page_size();
+ addr = __pa((unsigned long)page_address(page));
+
+ for (i = 0; i < (1 << order); i++, addr += PAGE_SIZE) {
+ for (j = 0; j < PAGE_SIZE; j += cmo_page_sz)
+ plpar_hcall_norets(H_PAGE_INIT, state, addr + j, 0);
+ }
+}
+
+void arch_free_page(struct page *page, int order)
+{
+ if (!cmo_free_hint_flag || !firmware_has_feature(FW_FEATURE_CMO))
+ return;
+
+ pSeries_set_page_state(page, order, H_PAGE_SET_UNUSED);
+}
+EXPORT_SYMBOL(arch_free_page);
+
+#endif
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index afad9f5ac0ac..b3cbac855924 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -19,7 +19,7 @@
#include <linux/vmalloc.h>
#include <linux/spinlock.h>
#include <linux/cpu.h>
-#include <linux/delay.h>
+#include <linux/workqueue.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -387,36 +387,51 @@ static void do_event_scan(void)
} while(error == 0);
}
-static void do_event_scan_all_cpus(long delay)
+static void rtas_event_scan(struct work_struct *w);
+DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan);
+
+/*
+ * Delay should be at least one second since some machines have problems if
+ * we call event-scan too quickly.
+ */
+static unsigned long event_scan_delay = 1*HZ;
+static int first_pass = 1;
+
+static void rtas_event_scan(struct work_struct *w)
{
- int cpu;
+ unsigned int cpu;
+
+ do_event_scan();
get_online_cpus();
- cpu = first_cpu(cpu_online_map);
- for (;;) {
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
- do_event_scan();
- set_cpus_allowed(current, CPU_MASK_ALL);
-
- /* Drop hotplug lock, and sleep for the specified delay */
- put_online_cpus();
- msleep_interruptible(delay);
- get_online_cpus();
-
- cpu = next_cpu(cpu, cpu_online_map);
- if (cpu == NR_CPUS)
- break;
+
+ cpu = next_cpu(smp_processor_id(), cpu_online_map);
+ if (cpu == NR_CPUS) {
+ cpu = first_cpu(cpu_online_map);
+
+ if (first_pass) {
+ first_pass = 0;
+ event_scan_delay = 30*HZ/rtas_event_scan_rate;
+
+ if (surveillance_timeout != -1) {
+ pr_debug("rtasd: enabling surveillance\n");
+ enable_surveillance(surveillance_timeout);
+ pr_debug("rtasd: surveillance enabled\n");
+ }
+ }
}
+
+ schedule_delayed_work_on(cpu, &event_scan_work,
+ __round_jiffies_relative(event_scan_delay, cpu));
+
put_online_cpus();
}
-static int rtasd(void *unused)
+static void start_event_scan(void)
{
unsigned int err_type;
int rc;
- daemonize("rtasd");
-
printk(KERN_DEBUG "RTAS daemon started\n");
pr_debug("rtasd: will sleep for %d milliseconds\n",
(30000 / rtas_event_scan_rate));
@@ -434,22 +449,8 @@ static int rtasd(void *unused)
}
}
- /* First pass. */
- do_event_scan_all_cpus(1000);
-
- if (surveillance_timeout != -1) {
- pr_debug("rtasd: enabling surveillance\n");
- enable_surveillance(surveillance_timeout);
- pr_debug("rtasd: surveillance enabled\n");
- }
-
- /* Delay should be at least one second since some
- * machines have problems if we call event-scan too
- * quickly. */
- for (;;)
- do_event_scan_all_cpus(30000/rtas_event_scan_rate);
-
- return -EINVAL;
+ schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
+ event_scan_delay);
}
static int __init rtas_init(void)
@@ -487,8 +488,7 @@ static int __init rtas_init(void)
if (!entry)
printk(KERN_ERR "Failed to create error_log proc entry\n");
- if (kernel_thread(rtasd, NULL, CLONE_FS) < 0)
- printk(KERN_ERR "Failed to start RTAS daemon\n");
+ start_event_scan();
return 0;
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ec341707e41b..8d75ea21296f 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -63,6 +63,7 @@
#include <asm/smp.h>
#include <asm/firmware.h>
#include <asm/eeh.h>
+#include <asm/pSeries_reconfig.h>
#include "plpar_wrappers.h"
#include "pseries.h"
@@ -254,6 +255,29 @@ static void __init pseries_discover_pic(void)
" interrupt-controller\n");
}
+static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
+{
+ struct device_node *np = node;
+ struct pci_dn *pci = NULL;
+ int err = NOTIFY_OK;
+
+ switch (action) {
+ case PSERIES_RECONFIG_ADD:
+ pci = np->parent->data;
+ if (pci)
+ update_dn_pci_info(np, pci->phb);
+ break;
+ default:
+ err = NOTIFY_DONE;
+ break;
+ }
+ return err;
+}
+
+static struct notifier_block pci_dn_reconfig_nb = {
+ .notifier_call = pci_dn_reconfig_notifier,
+};
+
static void __init pSeries_setup_arch(void)
{
/* Discover PIC type and setup ppc_md accordingly */
@@ -271,6 +295,7 @@ static void __init pSeries_setup_arch(void)
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
find_and_init_phbs();
+ pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
eeh_init();
pSeries_nvram_init();
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index b33b28a6fe12..2d1c87dd5d14 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_IPIC) += ipic.o
obj-$(CONFIG_4xx) += uic.o
obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
+obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index fd969f0e3121..eb5927212fab 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -61,7 +61,7 @@ EXPORT_SYMBOL(cpm2_immr);
void __init cpm2_reset(void)
{
#ifdef CONFIG_PPC_85xx
- cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+ cpm2_immr = ioremap(get_immrbase() + 0x80000, CPM_MAP_SIZE);
#else
cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
#endif
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index f25ce818d40a..da38a1ff97bb 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -113,8 +113,13 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
struct msi_msg *msg)
{
struct fsl_msi *msi_data = fsl_msi;
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ u32 base = 0;
- msg->address_lo = msi_data->msi_addr_lo;
+ pci_bus_read_config_dword(hose->bus,
+ PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base);
+
+ msg->address_lo = msi_data->msi_addr_lo + base;
msg->address_hi = msi_data->msi_addr_hi;
msg->data = hwirq;
@@ -271,7 +276,7 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev,
msi->irqhost->host_data = msi;
msi->msi_addr_hi = 0x0;
- msi->msi_addr_lo = res.start + features->msiir_offset;
+ msi->msi_addr_lo = features->msiir_offset + (res.start & 0xfffff);
rc = fsl_msi_init_allocator(msi);
if (rc) {
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 78021d8afc53..ae88b1448018 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -23,6 +23,8 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/lmb.h>
+#include <linux/log2.h>
#include <asm/io.h>
#include <asm/prom.h>
@@ -96,7 +98,13 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
- int i, j, n;
+ int i, j, n, mem_log, win_idx = 2;
+ u64 mem, sz, paddr_hi = 0;
+ u64 paddr_lo = ULLONG_MAX;
+ u32 pcicsrbar = 0, pcicsrbar_sz;
+ u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
+ char *name = hose->dn->full_name;
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
@@ -117,6 +125,9 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
continue;
+ paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start);
+ paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end);
+
n = setup_one_atmu(pci, j, &hose->mem_resources[i],
hose->pci_mem_offset);
@@ -147,10 +158,105 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
}
}
- /* Setup 2G inbound Memory Window @ 1 */
- out_be32(&pci->piw[2].pitar, 0x00000000);
- out_be32(&pci->piw[2].piwbar,0x00000000);
- out_be32(&pci->piw[2].piwar, PIWAR_2G);
+ /* convert to pci address space */
+ paddr_hi -= hose->pci_mem_offset;
+ paddr_lo -= hose->pci_mem_offset;
+
+ if (paddr_hi == paddr_lo) {
+ pr_err("%s: No outbound window space\n", name);
+ return ;
+ }
+
+ if (paddr_lo == 0) {
+ pr_err("%s: No space for inbound window\n", name);
+ return ;
+ }
+
+ /* setup PCSRBAR/PEXCSRBAR */
+ early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff);
+ early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
+ pcicsrbar_sz = ~pcicsrbar_sz + 1;
+
+ if (paddr_hi < (0x100000000ull - pcicsrbar_sz) ||
+ (paddr_lo > 0x100000000ull))
+ pcicsrbar = 0x100000000ull - pcicsrbar_sz;
+ else
+ pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz;
+ early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar);
+
+ paddr_lo = min(paddr_lo, (u64)pcicsrbar);
+
+ pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar);
+
+ /* Setup inbound mem window */
+ mem = lmb_end_of_DRAM();
+ sz = min(mem, paddr_lo);
+ mem_log = __ilog2_u64(sz);
+
+ /* PCIe can overmap inbound & outbound since RX & TX are separated */
+ if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+ /* Size window to exact size if power-of-two or one size up */
+ if ((1ull << mem_log) != mem) {
+ if ((1ull << mem_log) > mem)
+ pr_info("%s: Setting PCI inbound window "
+ "greater than memory size\n", name);
+ mem_log++;
+ }
+
+ piwar |= (mem_log - 1);
+
+ /* Setup inbound memory window */
+ out_be32(&pci->piw[win_idx].pitar, 0x00000000);
+ out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
+ out_be32(&pci->piw[win_idx].piwar, piwar);
+ win_idx--;
+
+ hose->dma_window_base_cur = 0x00000000;
+ hose->dma_window_size = (resource_size_t)sz;
+ } else {
+ u64 paddr = 0;
+
+ /* Setup inbound memory window */
+ out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwar, (piwar | (mem_log - 1)));
+ win_idx--;
+
+ paddr += 1ull << mem_log;
+ sz -= 1ull << mem_log;
+
+ if (sz) {
+ mem_log = __ilog2_u64(sz);
+ piwar |= (mem_log - 1);
+
+ out_be32(&pci->piw[win_idx].pitar, paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+ out_be32(&pci->piw[win_idx].piwar, piwar);
+ win_idx--;
+
+ paddr += 1ull << mem_log;
+ }
+
+ hose->dma_window_base_cur = 0x00000000;
+ hose->dma_window_size = (resource_size_t)paddr;
+ }
+
+ if (hose->dma_window_size < mem) {
+#ifndef CONFIG_SWIOTLB
+ pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to "
+ "map - enable CONFIG_SWIOTLB to avoid dma errors.\n",
+ name);
+#endif
+ /* adjusting outbound windows could reclaim space in mem map */
+ if (paddr_hi < 0xffffffffull)
+ pr_warning("%s: WARNING: Outbound window cfg leaves "
+ "gaps in memory map. Adjusting the memory map "
+ "could reduce unnecessary bounce buffering.\n",
+ name);
+
+ pr_info("%s: DMA window size is 0x%llx\n", name,
+ (u64)hose->dma_window_size);
+ }
iounmap(pci);
}
@@ -176,19 +282,9 @@ static void __init setup_pci_cmd(struct pci_controller *hose)
}
}
-static void __init setup_pci_pcsrbar(struct pci_controller *hose)
-{
-#ifdef CONFIG_PCI_MSI
- phys_addr_t immr_base;
-
- immr_base = get_immrbase();
- early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
-#endif
-}
-
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
- struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
int i;
if ((bus->parent == hose->bus) &&
@@ -269,8 +365,6 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
/* Setup PEX window registers */
setup_pci_atmu(hose, &rsrc);
- /* Setup PEXCSRBAR */
- setup_pci_pcsrbar(hose);
return 0;
}
@@ -281,6 +375,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8569, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
@@ -296,6 +392,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
@@ -324,7 +422,7 @@ struct mpc83xx_pcie_priv {
static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -350,7 +448,7 @@ static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
unsigned int devfn, int offset)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
struct mpc83xx_pcie_priv *pcie = hose->dn->data;
u8 bus_no = bus->number - hose->first_busno;
u32 dev_base = bus_no << 24 | devfn << 16;
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 13f30c2a61e7..a9d8bbebed80 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -16,7 +16,11 @@
#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */
#define PCIE_LTSSM_L0 0x16 /* L0 state */
-#define PIWAR_2G 0xa0f5501e /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+#define PIWAR_EN 0x80000000 /* Enable */
+#define PIWAR_PF 0x20000000 /* prefetch */
+#define PIWAR_TGI_LOCAL 0x00f00000 /* target - local memory */
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
/* PCI/PCI Express outbound window reg */
struct pci_outbound_window_regs {
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index abdb124e1e2f..39db9d1155d2 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1026,8 +1026,7 @@ int fsl_rio_setup(struct of_device *dev)
return -EFAULT;
}
dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name);
- dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n", regs.start,
- regs.end - regs.start + 1);
+ dev_info(&dev->dev, "Regs: %pR\n", &regs);
dt_range = of_get_property(dev->node, "ranges", &rlen);
if (!dt_range) {
@@ -1077,8 +1076,9 @@ int fsl_rio_setup(struct of_device *dev)
INIT_LIST_HEAD(&port->dbells);
port->iores.start = law_start;
- port->iores.end = law_start + law_size;
+ port->iores.end = law_start + law_size - 1;
port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
priv->bellirq = irq_of_parse_and_map(dev->node, 2);
priv->txirq = irq_of_parse_and_map(dev->node, 3);
@@ -1156,14 +1156,15 @@ int fsl_rio_setup(struct of_device *dev)
out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
/* Configure maintenance transaction window */
- out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
- out_be32(&priv->maint_atmu_regs->rowar, 0x80077015);
+ out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
+ out_be32(&priv->maint_atmu_regs->rowar, 0x80077015); /* 4M */
priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
/* Configure outbound doorbell window */
- out_be32(&priv->dbell_atmu_regs->rowbar, 0x000c0400);
- out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b);
+ out_be32(&priv->dbell_atmu_regs->rowbar,
+ (law_start + RIO_MAINT_WIN_SIZE) >> 12);
+ out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */
fsl_rio_doorbell_init(port);
return 0;
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 5c64ccd402e2..95dbc643c4fc 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -379,16 +379,10 @@ static int __init setup_rstcr(void)
struct device_node *np;
np = of_find_node_by_name(NULL, "global-utilities");
if ((np && of_get_property(np, "fsl,has-rstcr", NULL))) {
- const u32 *prop = of_get_property(np, "reg", NULL);
- if (prop) {
- /* map reset control register
- * 0xE00B0 is offset of reset control register
- */
- rstcr = ioremap(get_immrbase() + *prop + 0xB0, 0xff);
- if (!rstcr)
- printk (KERN_EMERG "Error: reset control "
- "register not mapped!\n");
- }
+ rstcr = of_iomap(np, 0) + 0xb0;
+ if (!rstcr)
+ printk (KERN_EMERG "Error: reset control register "
+ "not mapped!\n");
} else
printk (KERN_INFO "rstcr compatible register does not exist!\n");
if (np)
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index 7fd49c97501a..7ed809676642 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -24,7 +24,7 @@ static int
indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 *val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
volatile void __iomem *cfg_data;
u8 cfg_type = 0;
u32 bus_no, reg;
@@ -82,7 +82,7 @@ static int
indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 val)
{
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
volatile void __iomem *cfg_data;
u8 cfg_type = 0;
u32 bus_no, reg;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 352d8c3ef526..9c3af5045495 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -613,23 +613,23 @@ static int irq_choose_cpu(unsigned int virt_irq)
#define mpic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
/* Find an mpic associated with a given linux interrupt */
-static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
+static struct mpic *mpic_find(unsigned int irq)
{
- unsigned int src = mpic_irq_to_hw(irq);
- struct mpic *mpic;
-
if (irq < NUM_ISA_INTERRUPTS)
return NULL;
- mpic = irq_desc[irq].chip_data;
+ return irq_desc[irq].chip_data;
+}
- if (is_ipi)
- *is_ipi = (src >= mpic->ipi_vecs[0] &&
- src <= mpic->ipi_vecs[3]);
+/* Determine if the linux irq is an IPI */
+static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
+{
+ unsigned int src = mpic_irq_to_hw(irq);
- return mpic;
+ return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
}
+
/* Convert a cpu mask from logical to physical cpu numbers. */
static inline u32 mpic_physmask(u32 cpumask)
{
@@ -1383,8 +1383,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable)
void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
{
- unsigned int is_ipi;
- struct mpic *mpic = mpic_find(irq, &is_ipi);
+ struct mpic *mpic = mpic_find(irq);
unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
u32 reg;
@@ -1393,7 +1392,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
return;
spin_lock_irqsave(&mpic_lock, flags);
- if (is_ipi) {
+ if (mpic_is_ipi(mpic, irq)) {
reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
~MPIC_VECPRI_PRIORITY_MASK;
mpic_ipi_write(src - mpic->ipi_vecs[0],
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 6a2d473c345a..daefc93ddffe 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1295,7 +1295,7 @@ static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port
static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
- struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
struct ppc4xx_pciex_port *port =
&ppc4xx_pciex_ports[hose->indirect_type];
void __iomem *addr;
@@ -1352,7 +1352,7 @@ static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn,
static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
- struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
struct ppc4xx_pciex_port *port =
&ppc4xx_pciex_ports[hose->indirect_type];
void __iomem *addr;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 01bce3784b0a..b28b0e512d67 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -61,6 +61,7 @@ struct qe_immap __iomem *qe_immr;
EXPORT_SYMBOL(qe_immr);
static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */
+static unsigned int qe_num_of_snum;
static phys_addr_t qebase = -1;
@@ -264,10 +265,14 @@ static void qe_snums_init(void)
0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
- 0xD8, 0xD9, 0xE8, 0xE9,
+ 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
+ 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
+ 0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
};
- for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ qe_num_of_snum = qe_get_num_of_snums();
+
+ for (i = 0; i < qe_num_of_snum; i++) {
snums[i].num = snum_init[i];
snums[i].state = QE_SNUM_STATE_FREE;
}
@@ -280,7 +285,7 @@ int qe_get_snum(void)
int i;
spin_lock_irqsave(&qe_lock, flags);
- for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ for (i = 0; i < qe_num_of_snum; i++) {
if (snums[i].state == QE_SNUM_STATE_FREE) {
snums[i].state = QE_SNUM_STATE_USED;
snum = snums[i].num;
@@ -297,7 +302,7 @@ void qe_put_snum(u8 snum)
{
int i;
- for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+ for (i = 0; i < qe_num_of_snum; i++) {
if (snums[i].num == snum) {
snums[i].state = QE_SNUM_STATE_FREE;
break;
@@ -575,3 +580,65 @@ struct qe_firmware_info *qe_get_firmware_info(void)
}
EXPORT_SYMBOL(qe_get_firmware_info);
+unsigned int qe_get_num_of_risc(void)
+{
+ struct device_node *qe;
+ int size;
+ unsigned int num_of_risc = 0;
+ const u32 *prop;
+
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ /* Older devices trees did not have an "fsl,qe"
+ * compatible property, so we need to look for
+ * the QE node by name.
+ */
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return num_of_risc;
+ }
+
+ prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
+ if (prop && size == sizeof(*prop))
+ num_of_risc = *prop;
+
+ of_node_put(qe);
+
+ return num_of_risc;
+}
+EXPORT_SYMBOL(qe_get_num_of_risc);
+
+unsigned int qe_get_num_of_snums(void)
+{
+ struct device_node *qe;
+ int size;
+ unsigned int num_of_snums;
+ const u32 *prop;
+
+ num_of_snums = 28; /* The default number of snum for threads is 28 */
+ qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+ if (!qe) {
+ /* Older devices trees did not have an "fsl,qe"
+ * compatible property, so we need to look for
+ * the QE node by name.
+ */
+ qe = of_find_node_by_type(NULL, "qe");
+ if (!qe)
+ return num_of_snums;
+ }
+
+ prop = of_get_property(qe, "fsl,qe-num-snums", &size);
+ if (prop && size == sizeof(*prop)) {
+ num_of_snums = *prop;
+ if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
+ /* No QE ever has fewer than 28 SNUMs */
+ pr_err("QE: number of snum is invalid\n");
+ return -EINVAL;
+ }
+ }
+
+ of_node_put(qe);
+
+ return num_of_snums;
+}
+EXPORT_SYMBOL(qe_get_num_of_snums);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 24e1f5a197ae..cf244a419e96 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -63,7 +63,7 @@ tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc,
int offset, int len, u32 val)
{
volatile unsigned char *cfg_addr;
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
if (ppc_md.pci_exclude_device)
if (ppc_md.pci_exclude_device(hose, bus->number, devfunc))
@@ -149,7 +149,7 @@ tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 * val)
{
volatile unsigned char *cfg_addr;
- struct pci_controller *hose = bus->sysdata;
+ struct pci_controller *hose = pci_bus_to_host(bus);
u32 temp;
if (ppc_md.pci_exclude_device)
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index c658b413c9b4..3ee1fd37bbfc 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -25,6 +25,7 @@
#include <linux/of.h>
#include <asm/io.h>
#include <asm/processor.h>
+#include <asm/i8259.h>
#include <asm/irq.h>
/*
@@ -191,20 +192,14 @@ struct irq_host * __init
xilinx_intc_init(struct device_node *np)
{
struct irq_host * irq;
- struct resource res;
void * regs;
- int rc;
/* Find and map the intc registers */
- rc = of_address_to_resource(np, 0, &res);
- if (rc) {
- printk(KERN_ERR __FILE__ ": of_address_to_resource() failed\n");
+ regs = of_iomap(np, 0);
+ if (!regs) {
+ pr_err("xilinx_intc: could not map registers\n");
return NULL;
}
- regs = ioremap(res.start, 32);
-
- printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
- (unsigned long long) res.start, regs);
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
@@ -217,6 +212,7 @@ xilinx_intc_init(struct device_node *np)
if (!irq)
panic(__FILE__ ": Cannot allocate IRQ host\n");
irq->host_data = regs;
+
return irq;
}
@@ -227,23 +223,70 @@ int xilinx_intc_get_irq(void)
return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
}
+#if defined(CONFIG_PPC_I8259)
+/*
+ * Support code for cascading to 8259 interrupt controllers
+ */
+static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq = i8259_irq();
+ if (cascade_irq)
+ generic_handle_irq(cascade_irq);
+
+ /* Let xilinx_intc end the interrupt */
+ desc->chip->ack(irq);
+ desc->chip->unmask(irq);
+}
+
+static void __init xilinx_i8259_setup_cascade(void)
+{
+ struct device_node *cascade_node;
+ int cascade_irq;
+
+ /* Initialize i8259 controller */
+ cascade_node = of_find_compatible_node(NULL, NULL, "chrp,iic");
+ if (!cascade_node)
+ return;
+
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+ if (!cascade_irq) {
+ pr_err("virtex_ml510: Failed to map cascade interrupt\n");
+ goto out;
+ }
+
+ i8259_init(cascade_node, 0);
+ set_irq_chained_handler(cascade_irq, xilinx_i8259_cascade);
+
+ /* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
+ /* This looks like a dirty hack to me --gcl */
+ outb(0xc0, 0x4d0);
+ outb(0xc0, 0x4d1);
+
+ out:
+ of_node_put(cascade_node);
+}
+#else
+static inline void xilinx_i8259_setup_cascade(void) { return; }
+#endif /* defined(CONFIG_PPC_I8259) */
+
+static struct of_device_id xilinx_intc_match[] __initconst = {
+ { .compatible = "xlnx,opb-intc-1.00.c", },
+ { .compatible = "xlnx,xps-intc-1.00.a", },
+ {}
+};
+
+/*
+ * Initialize master Xilinx interrupt controller
+ */
void __init xilinx_intc_init_tree(void)
{
struct device_node *np;
/* find top level interrupt controller */
- for_each_compatible_node(np, NULL, "xlnx,opb-intc-1.00.c") {
+ for_each_matching_node(np, xilinx_intc_match) {
if (!of_get_property(np, "interrupts", NULL))
break;
}
- if (!np) {
- for_each_compatible_node(np, NULL, "xlnx,xps-intc-1.00.a") {
- if (!of_get_property(np, "interrupts", NULL))
- break;
- }
- }
-
- /* xilinx interrupt controller needs to be top level */
BUG_ON(!np);
master_irqhost = xilinx_intc_init(np);
@@ -251,4 +294,6 @@ void __init xilinx_intc_init_tree(void)
irq_set_default_host(master_irqhost);
of_node_put(np);
+
+ xilinx_i8259_setup_cascade();
}
diff --git a/arch/powerpc/sysdev/xilinx_pci.c b/arch/powerpc/sysdev/xilinx_pci.c
new file mode 100644
index 000000000000..1453b0eed220
--- /dev/null
+++ b/arch/powerpc/sysdev/xilinx_pci.c
@@ -0,0 +1,132 @@
+/*
+ * PCI support for Xilinx plbv46_pci soft-core which can be used on
+ * Xilinx Virtex ML410 / ML510 boards.
+ *
+ * Copyright 2009 Roderick Colenbrander
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ *
+ * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
+ * by Benjamin Herrenschmidt.
+ * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <mm/mmu_decl.h>
+#include <asm/io.h>
+#include <asm/xilinx_pci.h>
+
+#define XPLB_PCI_ADDR 0x10c
+#define XPLB_PCI_DATA 0x110
+#define XPLB_PCI_BUS 0x114
+
+#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+
+static struct of_device_id xilinx_pci_match[] = {
+ { .compatible = "xlnx,plbv46-pci-1.03.a", },
+ {}
+};
+
+/**
+ * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
+ */
+static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
+{
+ struct pci_controller *hose;
+ int i;
+
+ if (dev->devfn || dev->bus->self)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (!hose)
+ return;
+
+ if (!of_match_node(xilinx_pci_match, hose->dn))
+ return;
+
+ /* Hide the PCI host BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+
+ dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
+
+/**
+ * xilinx_pci_exclude_device - Don't do config access for non-root bus
+ *
+ * This is a hack. Config access to any bus other than bus 0 does not
+ * currently work on the ML510 so we prevent it here.
+ */
+static int
+xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+ return (bus != 0);
+}
+
+/**
+ * xilinx_pci_init - Find and register a Xilinx PCI host bridge
+ */
+void __init xilinx_pci_init(void)
+{
+ struct pci_controller *hose;
+ struct resource r;
+ void __iomem *pci_reg;
+ struct device_node *pci_node;
+
+ pci_node = of_find_matching_node(NULL, xilinx_pci_match);
+ if(!pci_node)
+ return;
+
+ if (of_address_to_resource(pci_node, 0, &r)) {
+ pr_err("xilinx-pci: cannot resolve base address\n");
+ return;
+ }
+
+ hose = pcibios_alloc_controller(pci_node);
+ if (!hose) {
+ pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
+ return;
+ }
+
+ /* Setup config space */
+ setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
+ r.start + XPLB_PCI_DATA,
+ PPC_INDIRECT_TYPE_SET_CFG_TYPE);
+
+ /* According to the xilinx plbv46_pci documentation the soft-core starts
+ * a self-init when the bus master enable bit is set. Without this bit
+ * set the pci bus can't be scanned.
+ */
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
+
+ /* Set the max latency timer to 255 */
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
+
+ /* Set the max bus number to 255 */
+ pci_reg = of_iomap(pci_node, 0);
+ out_8(pci_reg + XPLB_PCI_BUS, 0xff);
+ iounmap(pci_reg);
+
+ /* Nothing past the root bridge is working right now. By default
+ * exclude config access to anything except bus 0 */
+ if (!ppc_md.pci_exclude_device)
+ ppc_md.pci_exclude_device = xilinx_pci_exclude_device;
+
+ /* Register the host bridge with the linux kernel! */
+ pci_process_bridge_OF_ranges(hose, pci_node, 1);
+
+ pr_info("xilinx-pci: Registered PCI host bridge\n");
+}
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 8dfad7d9a004..e1f33a81e5e1 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -110,6 +110,7 @@ static int bsesc(void);
static void dump(void);
static void prdump(unsigned long, long);
static int ppc_inst_dump(unsigned long, long, int);
+static void dump_log_buf(void);
static void backtrace(struct pt_regs *);
static void excprint(struct pt_regs *);
static void prregs(struct pt_regs *);
@@ -197,6 +198,7 @@ Commands:\n\
di dump instructions\n\
df dump float values\n\
dd dump double values\n\
+ dl dump the kernel log buffer\n\
dr dump stream of raw bytes\n\
e print exception information\n\
f flush cache\n\
@@ -2009,6 +2011,8 @@ dump(void)
nidump = MAX_DUMP;
adrs += ppc_inst_dump(adrs, nidump, 1);
last_cmd = "di\n";
+ } else if (c == 'l') {
+ dump_log_buf();
} else if (c == 'r') {
scanhex(&ndump);
if (ndump == 0)
@@ -2122,6 +2126,49 @@ print_address(unsigned long addr)
xmon_print_symbol(addr, "\t# ", "");
}
+void
+dump_log_buf(void)
+{
+ const unsigned long size = 128;
+ unsigned long end, addr;
+ unsigned char buf[size + 1];
+
+ addr = 0;
+ buf[size] = '\0';
+
+ if (setjmp(bus_error_jmp) != 0) {
+ printf("Unable to lookup symbol __log_buf!\n");
+ return;
+ }
+
+ catch_memory_errors = 1;
+ sync();
+ addr = kallsyms_lookup_name("__log_buf");
+
+ if (! addr)
+ printf("Symbol __log_buf not found!\n");
+ else {
+ end = addr + (1 << CONFIG_LOG_BUF_SHIFT);
+ while (addr < end) {
+ if (! mread(addr, buf, size)) {
+ printf("Can't read memory at address 0x%lx\n", addr);
+ break;
+ }
+
+ printf("%s", buf);
+
+ if (strlen(buf) < size)
+ break;
+
+ addr += size;
+ }
+ }
+
+ sync();
+ /* wait a little while to see if we get a machine check */
+ __delay(200);
+ catch_memory_errors = 0;
+}
/*
* Memory operations - move, set, print differences
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index ffc9254f7e02..042c8149a6d1 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -867,7 +867,7 @@ static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id)
int j;
struct device_node *node = vdev->dev.archdata.of_node;
- if (i > VIOTAPE_MAX_TAPE)
+ if (i >= VIOTAPE_MAX_TAPE)
return -ENODEV;
if (!node)
return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 8b92a4666e02..e4476743f203 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -756,12 +756,12 @@ static int __devinit iic_probe(struct of_device *ofdev,
goto error_cleanup;
}
- /* Now register all the child nodes */
- of_register_i2c_devices(adap, np);
-
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+ /* Now register all the child nodes */
+ of_register_i2c_devices(adap, np);
+
return 0;
error_cleanup:
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index c0621d50c8a0..0ddf9044948a 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -37,6 +37,7 @@
#define CONFIG_REG 0x40
#define MANUAL_MASK 0xe0
#define AUTO_MASK 0x20
+#define INVERT_MASK 0x10
static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
@@ -229,7 +230,8 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
if (speed >= 0) {
manual = read_reg(th, MANUAL_MODE[fan]);
- write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK);
+ write_reg(th, MANUAL_MODE[fan],
+ (manual|MANUAL_MASK) & (~INVERT_MASK));
write_reg(th, FAN_SPD_SET[fan], speed);
} else {
/* back to automatic */
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 44f8392da117..9dd16c9b1a10 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -270,7 +270,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
u8 num_entries,
u32 thread_size,
u32 thread_alignment,
- enum qe_risc_allocation risc,
+ unsigned int risc,
int skip_page_for_first_entry)
{
u32 init_enet_offset;
@@ -307,7 +307,7 @@ static int fill_init_enet_entries(struct ucc_geth_private *ugeth,
static int return_init_enet_entries(struct ucc_geth_private *ugeth,
u32 *p_start,
u8 num_entries,
- enum qe_risc_allocation risc,
+ unsigned int risc,
int skip_page_for_first_entry)
{
u32 init_enet_offset;
@@ -342,7 +342,7 @@ static int dump_init_enet_entries(struct ucc_geth_private *ugeth,
u32 __iomem *p_start,
u8 num_entries,
u32 thread_size,
- enum qe_risc_allocation risc,
+ unsigned int risc,
int skip_page_for_first_entry)
{
u32 init_enet_offset;
@@ -2135,6 +2135,14 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
return -ENOMEM;
}
+ /* read the number of risc engines, update the riscTx and riscRx
+ * if there are 4 riscs in QE
+ */
+ if (qe_get_num_of_risc() == 4) {
+ ug_info->riscTx = QE_RISC_ALLOCATION_FOUR_RISCS;
+ ug_info->riscRx = QE_RISC_ALLOCATION_FOUR_RISCS;
+ }
+
ugeth->ug_regs = ioremap(uf_info->regs, sizeof(*ugeth->ug_regs));
if (!ugeth->ug_regs) {
if (netif_msg_probe(ugeth))
@@ -3702,7 +3710,15 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.utfet = UCC_GETH_UTFET_GIGA_INIT;
ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
- ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
+
+ /* If QE's snum number is 46 which means we need to support
+ * 4 UECs at 1000Base-T simultaneously, we need to allocate
+ * more Threads to Rx.
+ */
+ if (qe_get_num_of_snums() == 46)
+ ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
+ else
+ ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
}
if (netif_msg_probe(&debug))
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 2f8ee7c87efe..46bb1d233597 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -1120,8 +1120,8 @@ struct ucc_geth_info {
enum ucc_geth_maccfg2_pad_and_crc_mode padAndCrc;
enum ucc_geth_num_of_threads numThreadsTx;
enum ucc_geth_num_of_threads numThreadsRx;
- enum qe_risc_allocation riscTx;
- enum qe_risc_allocation riscRx;
+ unsigned int riscTx;
+ unsigned int riscRx;
};
/* structure representing UCC GETH */
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 41c5dfd85358..391f91c0bf55 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -447,6 +447,7 @@ struct of_modalias_table {
static struct of_modalias_table of_modalias_table[] = {
{ "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
{ "mmc-spi-slot", "mmc_spi" },
+ { "stm,m25p40", "m25p80" },
};
/**
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ba6af162fd39..b77ae6794275 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -39,7 +39,6 @@ obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
obj-$(CONFIG_PARISC) += setup-bus.o
obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
-obj-$(CONFIG_PPC32) += setup-irq.o
obj-$(CONFIG_PPC) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 74d0bfa3f310..3b78540288c7 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -290,7 +290,7 @@ static void __devinit rio_add_device(struct rio_dev *rdev)
* to a RIO device on success or NULL on failure.
*
*/
-static struct rio_dev *rio_setup_device(struct rio_net *net,
+static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
struct rio_mport *port, u16 destid,
u8 hopcount, int do_enum)
{
@@ -559,7 +559,7 @@ static void rio_net_add_mport(struct rio_net *net, struct rio_mport *port)
* Recursively enumerates a RIO network. Transactions are sent via the
* master port passed in @port.
*/
-static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
u8 hopcount)
{
int port_num;
@@ -718,7 +718,7 @@ static int rio_enum_complete(struct rio_mport *port)
* Recursively discovers a RIO network. Transactions are sent via the
* master port passed in @port.
*/
-static int
+static int __devinit
rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
u8 hopcount)
{
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 40a3a2afbfe7..7a868bd16e0e 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -1,13 +1,12 @@
/*
- * xilinxfb.c
- *
- * Xilinx TFT LCD frame buffer driver
+ * Xilinx TFT frame buffer driver
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2002-2007 (c) MontaVista Software, Inc.
* 2007 (c) Secret Lab Technologies, Ltd.
+ * 2009 (c) Xilinx Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -24,33 +23,38 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/version.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#if defined(CONFIG_OF)
#include <linux/of_device.h>
#include <linux/of_platform.h>
-#endif
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/xilinxfb.h>
+#include <asm/dcr.h>
#define DRIVER_NAME "xilinxfb"
-#define DRIVER_DESCRIPTION "Xilinx TFT LCD frame buffer driver"
+
/*
* Xilinx calls it "PLB TFT LCD Controller" though it can also be used for
- * the VGA port on the Xilinx ML40x board. This is a hardware display controller
- * for a 640x480 resolution TFT or VGA screen.
+ * the VGA port on the Xilinx ML40x board. This is a hardware display
+ * controller for a 640x480 resolution TFT or VGA screen.
*
* The interface to the framebuffer is nice and simple. There are two
* control registers. The first tells the LCD interface where in memory
* the frame buffer is (only the 11 most significant bits are used, so
* don't start thinking about scrolling). The second allows the LCD to
* be turned on or off as well as rotated 180 degrees.
+ *
+ * In case of direct PLB access the second control register will be at
+ * an offset of 4 as compared to the DCR access where the offset is 1
+ * i.e. REG_CTRL. So this is taken care in the function
+ * xilinx_fb_out_be32 where it left shifts the offset 2 times in case of
+ * direct PLB access.
*/
#define NUM_REGS 2
#define REG_FB_ADDR 0
@@ -107,17 +111,28 @@ static struct fb_var_screeninfo xilinx_fb_var = {
.activate = FB_ACTIVATE_NOW
};
+
+#define PLB_ACCESS_FLAG 0x1 /* 1 = PLB, 0 = DCR */
+
struct xilinxfb_drvdata {
struct fb_info info; /* FB driver info record */
- u32 regs_phys; /* phys. address of the control registers */
- u32 __iomem *regs; /* virt. address of the control registers */
+ phys_addr_t regs_phys; /* phys. address of the control
+ registers */
+ void __iomem *regs; /* virt. address of the control
+ registers */
+
+ dcr_host_t dcr_host;
+ unsigned int dcr_start;
+ unsigned int dcr_len;
void *fb_virt; /* virt. address of the frame buffer */
dma_addr_t fb_phys; /* phys. address of the frame buffer */
int fb_alloced; /* Flag, was the fb memory alloced? */
+ u8 flags; /* features of the driver */
+
u32 reg_ctrl_default;
u32 pseudo_palette[PALETTE_ENTRIES_NO];
@@ -128,14 +143,19 @@ struct xilinxfb_drvdata {
container_of(_info, struct xilinxfb_drvdata, info)
/*
- * The LCD controller has DCR interface to its registers, but all
- * the boards and configurations the driver has been tested with
- * use opb2dcr bridge. So the registers are seen as memory mapped.
- * This macro is to make it simple to add the direct DCR access
- * when it's needed.
+ * The XPS TFT Controller can be accessed through PLB or DCR interface.
+ * To perform the read/write on the registers we need to check on
+ * which bus its connected and call the appropriate write API.
*/
-#define xilinx_fb_out_be32(driverdata, offset, val) \
- out_be32(driverdata->regs + offset, val)
+static void xilinx_fb_out_be32(struct xilinxfb_drvdata *drvdata, u32 offset,
+ u32 val)
+{
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ out_be32(drvdata->regs + (offset << 2), val);
+ else
+ dcr_write(drvdata->dcr_host, offset, val);
+
+}
static int
xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
@@ -203,35 +223,34 @@ static struct fb_ops xilinxfb_ops =
* Bus independent setup/teardown
*/
-static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
+static int xilinxfb_assign(struct device *dev,
+ struct xilinxfb_drvdata *drvdata,
+ unsigned long physaddr,
struct xilinxfb_platform_data *pdata)
{
- struct xilinxfb_drvdata *drvdata;
int rc;
int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
- /* Allocate the driver data region */
- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
- if (!drvdata) {
- dev_err(dev, "Couldn't allocate device private record\n");
- return -ENOMEM;
- }
- dev_set_drvdata(dev, drvdata);
-
- /* Map the control registers in */
- if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
- physaddr);
- rc = -ENODEV;
- goto err_region;
- }
- drvdata->regs_phys = physaddr;
- drvdata->regs = ioremap(physaddr, 8);
- if (!drvdata->regs) {
- dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
- physaddr);
- rc = -ENODEV;
- goto err_map;
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ /*
+ * Map the control registers in if the controller
+ * is on direct PLB interface.
+ */
+ if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
+ dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+ physaddr);
+ rc = -ENODEV;
+ goto err_region;
+ }
+
+ drvdata->regs_phys = physaddr;
+ drvdata->regs = ioremap(physaddr, 8);
+ if (!drvdata->regs) {
+ dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
+ physaddr);
+ rc = -ENODEV;
+ goto err_map;
+ }
}
/* Allocate the framebuffer memory */
@@ -247,7 +266,10 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
if (!drvdata->fb_virt) {
dev_err(dev, "Could not allocate frame buffer memory\n");
rc = -ENOMEM;
- goto err_fbmem;
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ goto err_fbmem;
+ else
+ goto err_region;
}
/* Clear (turn to black) the framebuffer */
@@ -260,7 +282,8 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
if (pdata->rotate_screen)
drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
- xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
+ xilinx_fb_out_be32(drvdata, REG_CTRL,
+ drvdata->reg_ctrl_default);
/* Fill struct fb_info */
drvdata->info.device = dev;
@@ -296,11 +319,14 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
goto err_regfb;
}
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ /* Put a banner in the log (for DEBUG) */
+ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr,
+ drvdata->regs);
+ }
/* Put a banner in the log (for DEBUG) */
- dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
- dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
- (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
- fbsize);
+ dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
+ (void *)drvdata->fb_phys, drvdata->fb_virt, fbsize);
return 0; /* success */
@@ -311,14 +337,19 @@ err_cmap:
if (drvdata->fb_alloced)
dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
drvdata->fb_phys);
+ else
+ iounmap(drvdata->fb_virt);
+
/* Turn off the display */
xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
err_fbmem:
- iounmap(drvdata->regs);
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ iounmap(drvdata->regs);
err_map:
- release_mem_region(physaddr, 8);
+ if (drvdata->flags & PLB_ACCESS_FLAG)
+ release_mem_region(physaddr, 8);
err_region:
kfree(drvdata);
@@ -342,12 +373,18 @@ static int xilinxfb_release(struct device *dev)
if (drvdata->fb_alloced)
dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
drvdata->fb_virt, drvdata->fb_phys);
+ else
+ iounmap(drvdata->fb_virt);
/* Turn off the display */
xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
- iounmap(drvdata->regs);
- release_mem_region(drvdata->regs_phys, 8);
+ /* Release the resources, as allocated based on interface */
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ iounmap(drvdata->regs);
+ release_mem_region(drvdata->regs_phys, 8);
+ } else
+ dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
kfree(drvdata);
dev_set_drvdata(dev, NULL);
@@ -356,77 +393,57 @@ static int xilinxfb_release(struct device *dev)
}
/* ---------------------------------------------------------------------
- * Platform bus binding
- */
-
-static int
-xilinxfb_platform_probe(struct platform_device *pdev)
-{
- struct xilinxfb_platform_data *pdata;
- struct resource *res;
-
- /* Find the registers address */
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!res) {
- dev_err(&pdev->dev, "Couldn't get registers resource\n");
- return -ENODEV;
- }
-
- /* If a pdata structure is provided, then extract the parameters */
- pdata = &xilinx_fb_default_pdata;
- if (pdev->dev.platform_data) {
- pdata = pdev->dev.platform_data;
- if (!pdata->xres)
- pdata->xres = xilinx_fb_default_pdata.xres;
- if (!pdata->yres)
- pdata->yres = xilinx_fb_default_pdata.yres;
- if (!pdata->xvirt)
- pdata->xvirt = xilinx_fb_default_pdata.xvirt;
- if (!pdata->yvirt)
- pdata->yvirt = xilinx_fb_default_pdata.yvirt;
- }
-
- return xilinxfb_assign(&pdev->dev, res->start, pdata);
-}
-
-static int
-xilinxfb_platform_remove(struct platform_device *pdev)
-{
- return xilinxfb_release(&pdev->dev);
-}
-
-
-static struct platform_driver xilinxfb_platform_driver = {
- .probe = xilinxfb_platform_probe,
- .remove = xilinxfb_platform_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = DRIVER_NAME,
- },
-};
-
-/* ---------------------------------------------------------------------
* OF bus binding
*/
-#if defined(CONFIG_OF)
static int __devinit
xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
{
- struct resource res;
const u32 *prop;
+ u32 *p;
+ u32 tft_access;
struct xilinxfb_platform_data pdata;
+ struct resource res;
int size, rc;
+ int start = 0, len = 0;
+ dcr_host_t dcr_host;
+ struct xilinxfb_drvdata *drvdata;
/* Copy with the default pdata (not a ptr reference!) */
pdata = xilinx_fb_default_pdata;
dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
- rc = of_address_to_resource(op->node, 0, &res);
- if (rc) {
- dev_err(&op->dev, "invalid address\n");
- return rc;
+ /*
+ * To check whether the core is connected directly to DCR or PLB
+ * interface and initialize the tft_access accordingly.
+ */
+ p = (u32 *)of_get_property(op->node, "xlnx,dcr-splb-slave-if", NULL);
+
+ if (p)
+ tft_access = *p;
+ else
+ tft_access = 0; /* For backward compatibility */
+
+ /*
+ * Fill the resource structure if its direct PLB interface
+ * otherwise fill the dcr_host structure.
+ */
+ if (tft_access) {
+ rc = of_address_to_resource(op->node, 0, &res);
+ if (rc) {
+ dev_err(&op->dev, "invalid address\n");
+ return -ENODEV;
+ }
+
+ } else {
+ start = dcr_resource_start(op->node, 0);
+ len = dcr_resource_len(op->node, 0);
+ dcr_host = dcr_map(op->node, start, len);
+ if (!DCR_MAP_OK(dcr_host)) {
+ dev_err(&op->dev, "invalid address\n");
+ return -ENODEV;
+ }
}
prop = of_get_property(op->node, "phys-size", &size);
@@ -450,7 +467,26 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
if (of_find_property(op->node, "rotate-display", NULL))
pdata.rotate_screen = 1;
- return xilinxfb_assign(&op->dev, res.start, &pdata);
+ /* Allocate the driver data region */
+ drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata) {
+ dev_err(&op->dev, "Couldn't allocate device private record\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(&op->dev, drvdata);
+
+ if (tft_access)
+ drvdata->flags |= PLB_ACCESS_FLAG;
+
+ /* Arguments are passed based on the interface */
+ if (drvdata->flags & PLB_ACCESS_FLAG) {
+ return xilinxfb_assign(&op->dev, drvdata, res.start, &pdata);
+ } else {
+ drvdata->dcr_start = start;
+ drvdata->dcr_len = len;
+ drvdata->dcr_host = dcr_host;
+ return xilinxfb_assign(&op->dev, drvdata, 0, &pdata);
+ }
}
static int __devexit xilinxfb_of_remove(struct of_device *op)
@@ -460,7 +496,9 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
/* Match table for of_platform binding */
static struct of_device_id xilinxfb_of_match[] __devinitdata = {
+ { .compatible = "xlnx,xps-tft-1.00.a", },
{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
+ { .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
{},
};
MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
@@ -476,22 +514,6 @@ static struct of_platform_driver xilinxfb_of_driver = {
},
};
-/* Registration helpers to keep the number of #ifdefs to a minimum */
-static inline int __init xilinxfb_of_register(void)
-{
- pr_debug("xilinxfb: calling of_register_platform_driver()\n");
- return of_register_platform_driver(&xilinxfb_of_driver);
-}
-
-static inline void __exit xilinxfb_of_unregister(void)
-{
- of_unregister_platform_driver(&xilinxfb_of_driver);
-}
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
-static inline int __init xilinxfb_of_register(void) { return 0; }
-static inline void __exit xilinxfb_of_unregister(void) { }
-#endif /* CONFIG_OF */
/* ---------------------------------------------------------------------
* Module setup and teardown
@@ -500,28 +522,18 @@ static inline void __exit xilinxfb_of_unregister(void) { }
static int __init
xilinxfb_init(void)
{
- int rc;
- rc = xilinxfb_of_register();
- if (rc)
- return rc;
-
- rc = platform_driver_register(&xilinxfb_platform_driver);
- if (rc)
- xilinxfb_of_unregister();
-
- return rc;
+ return of_register_platform_driver(&xilinxfb_of_driver);
}
static void __exit
xilinxfb_cleanup(void)
{
- platform_driver_unregister(&xilinxfb_platform_driver);
- xilinxfb_of_unregister();
+ of_unregister_platform_driver(&xilinxfb_of_driver);
}
module_init(xilinxfb_init);
module_exit(xilinxfb_cleanup);
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
MODULE_LICENSE("GPL");
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9f36e1cdbf01..a3df4a2bba63 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2289,6 +2289,8 @@
#define PCI_DEVICE_ID_MPC8547E 0x0018
#define PCI_DEVICE_ID_MPC8545E 0x0019
#define PCI_DEVICE_ID_MPC8545 0x001a
+#define PCI_DEVICE_ID_MPC8569E 0x0061
+#define PCI_DEVICE_ID_MPC8569 0x0060
#define PCI_DEVICE_ID_MPC8568E 0x0020
#define PCI_DEVICE_ID_MPC8568 0x0021
#define PCI_DEVICE_ID_MPC8567E 0x0022
@@ -2301,6 +2303,8 @@
#define PCI_DEVICE_ID_MPC8572 0x0041
#define PCI_DEVICE_ID_MPC8536E 0x0050
#define PCI_DEVICE_ID_MPC8536 0x0051
+#define PCI_DEVICE_ID_P2020E 0x0070
+#define PCI_DEVICE_ID_P2020 0x0071
#define PCI_DEVICE_ID_MPC8641 0x7010
#define PCI_DEVICE_ID_MPC8641D 0x7011
#define PCI_DEVICE_ID_MPC8610 0x7018