diff options
| -rw-r--r-- | drivers/hwmon/ds1621.c | 51 |
1 files changed, 19 insertions, 32 deletions
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index d5ac422d73b2..ccf0fe617e5f 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -63,10 +63,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") #define DS1621_ALARM_TEMP_HIGH 0x40 #define DS1621_ALARM_TEMP_LOW 0x20 -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ +/* Conversions */ #define ALARMS_FROM_REG(val) ((val) & \ (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW)) @@ -101,7 +98,7 @@ static struct i2c_driver ds1621_driver = { /* All registers are word-sized, except for the configuration register. DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ + the SMBus standard. */ static int ds1621_read_value(struct i2c_client *client, u8 reg) { if (reg == DS1621_REG_CONF) @@ -110,9 +107,6 @@ static int ds1621_read_value(struct i2c_client *client, u8 reg) return swab16(i2c_smbus_read_word_data(client, reg)); } -/* All registers are word-sized, except for the configuration register. - DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value) { if (reg == DS1621_REG_CONF) @@ -204,7 +198,7 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, int kind) { int conf, temp; - struct i2c_client *new_client; + struct i2c_client *client; struct ds1621_data *data; int err = 0; @@ -221,55 +215,48 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &ds1621_driver; - new_client->flags = 0; - + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &ds1621_driver; /* Now, we do the remaining detection. It is lousy. */ if (kind < 0) { /* The NVB bit should be low if no EEPROM write has been requested during the latest 10ms, which is highly improbable in our case. */ - conf = ds1621_read_value(new_client, DS1621_REG_CONF); + conf = ds1621_read_value(client, DS1621_REG_CONF); if (conf & DS1621_REG_CONFIG_NVB) goto exit_free; /* The 7 lowest bits of a temperature should always be 0. */ - temp = ds1621_read_value(new_client, DS1621_REG_TEMP); + temp = ds1621_read_value(client, DS1621_REG_TEMP); if (temp & 0x007f) goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN); + temp = ds1621_read_value(client, DS1621_REG_TEMP_MIN); if (temp & 0x007f) goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX); + temp = ds1621_read_value(client, DS1621_REG_TEMP_MAX); if (temp & 0x007f) goto exit_free; } - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = ds1621; - /* Fill in remaining client fields and put it into the global list */ - strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE); - data->valid = 0; + strlcpy(client->name, "ds1621", I2C_NAME_SIZE); mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto exit_free; /* Initialize the DS1621 chip */ - ds1621_init_client(new_client); + ds1621_init_client(client); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group))) + if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group))) goto exit_detach; - data->class_dev = hwmon_device_register(&new_client->dev); + data->class_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto exit_remove_files; @@ -278,9 +265,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, return 0; exit_remove_files: - sysfs_remove_group(&new_client->dev.kobj, &ds1621_group); + sysfs_remove_group(&client->dev.kobj, &ds1621_group); exit_detach: - i2c_detach_client(new_client); + i2c_detach_client(client); exit_free: kfree(data); exit: |