summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt23
-rw-r--r--arch/x86/Kconfig108
-rw-r--r--arch/x86/Kconfig.debug2
-rw-r--r--arch/x86/Makefile19
-rw-r--r--arch/x86/boot/compressed/misc.c4
-rw-r--r--arch/x86/boot/memory.c3
-rw-r--r--arch/x86/kernel/Makefile4
-rw-r--r--arch/x86/kernel/acpi/boot.c332
-rw-r--r--arch/x86/kernel/apic_32.c12
-rw-r--r--arch/x86/kernel/apic_64.c6
-rw-r--r--arch/x86/kernel/cpu/mtrr/generic.c38
-rw-r--r--arch/x86/kernel/cpu/mtrr/main.c901
-rw-r--r--arch/x86/kernel/cpu/mtrr/mtrr.h3
-rw-r--r--arch/x86/kernel/e820.c896
-rw-r--r--arch/x86/kernel/e820_32.c536
-rw-r--r--arch/x86/kernel/e820_64.c787
-rw-r--r--arch/x86/kernel/efi.c59
-rw-r--r--arch/x86/kernel/efi_64.c8
-rw-r--r--arch/x86/kernel/genapic_64.c2
-rw-r--r--arch/x86/kernel/head.c73
-rw-r--r--arch/x86/kernel/head32.c27
-rw-r--r--arch/x86/kernel/head64.c68
-rw-r--r--arch/x86/kernel/head_32.S6
-rw-r--r--arch/x86/kernel/io_apic_32.c127
-rw-r--r--arch/x86/kernel/io_apic_64.c82
-rw-r--r--arch/x86/kernel/mpparse.c803
-rw-r--r--arch/x86/kernel/numaq_32.c25
-rw-r--r--arch/x86/kernel/setup.c23
-rw-r--r--arch/x86/kernel/setup_32.c269
-rw-r--r--arch/x86/kernel/setup_64.c42
-rw-r--r--arch/x86/kernel/smpboot.c17
-rw-r--r--arch/x86/kernel/srat_32.c43
-rw-r--r--arch/x86/kernel/summit_32.c2
-rw-r--r--arch/x86/kernel/trampoline.c2
-rw-r--r--arch/x86/lguest/boot.c5
-rw-r--r--arch/x86/mach-default/setup.c7
-rw-r--r--arch/x86/mach-es7000/Makefile1
-rw-r--r--arch/x86/mach-es7000/es7000plat.c49
-rw-r--r--arch/x86/mach-generic/Makefile10
-rw-r--r--arch/x86/mach-generic/bigsmp.c4
-rw-r--r--arch/x86/mach-generic/numaq.c41
-rw-r--r--arch/x86/mach-generic/probe.c15
-rw-r--r--arch/x86/mach-visws/mpparse.c7
-rw-r--r--arch/x86/mach-voyager/setup.c7
-rw-r--r--arch/x86/mach-voyager/voyager_smp.c14
-rw-r--r--arch/x86/mm/discontig_32.c156
-rw-r--r--arch/x86/mm/init_32.c3
-rw-r--r--arch/x86/mm/numa_64.c2
-rw-r--r--arch/x86/pci/Makefile_325
-rw-r--r--arch/x86/pci/k8-bus_64.c4
-rw-r--r--arch/x86/pci/numa.c29
-rw-r--r--arch/x86/xen/enlighten.c3
-rw-r--r--drivers/acpi/Kconfig1
-rw-r--r--drivers/acpi/pci_irq.c5
-rw-r--r--drivers/firmware/dmi_scan.c5
-rw-r--r--include/asm-x86/acpi.h1
-rw-r--r--include/asm-x86/bios_ebda.h2
-rw-r--r--include/asm-x86/bootparam.h3
-rw-r--r--include/asm-x86/e820.h80
-rw-r--r--include/asm-x86/e820_32.h24
-rw-r--r--include/asm-x86/e820_64.h27
-rw-r--r--include/asm-x86/efi.h2
-rw-r--r--include/asm-x86/io_apic.h25
-rw-r--r--include/asm-x86/ipi.h1
-rw-r--r--include/asm-x86/mach-generic/mach_mpparse.h7
-rw-r--r--include/asm-x86/mach-numaq/mach_apic.h39
-rw-r--r--include/asm-x86/mach-numaq/mach_mpparse.h11
-rw-r--r--include/asm-x86/mmzone_32.h26
-rw-r--r--include/asm-x86/mpspec.h30
-rw-r--r--include/asm-x86/numaq.h6
-rw-r--r--include/asm-x86/setup.h11
-rw-r--r--include/asm-x86/smp.h1
-rw-r--r--include/asm-x86/srat.h12
-rw-r--r--include/asm-x86/system.h1
-rw-r--r--include/linux/efi.h4
-rw-r--r--include/linux/mm.h3
-rw-r--r--include/linux/pageblock-flags.h8
-rw-r--r--mm/page_alloc.c49
78 files changed, 3638 insertions, 2460 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b52f47d588b4..e53ff0975573 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -599,6 +599,29 @@ and is between 256 and 4096 characters. It is defined in the file
See drivers/char/README.epca and
Documentation/digiepca.txt.
+ disable_mtrr_cleanup [X86]
+ enable_mtrr_cleanup [X86]
+ The kernel tries to adjust MTRR layout from continuous
+ to discrete, to make X server driver able to add WB
+ entry later. This parameter enables/disables that.
+
+ mtrr_chunk_size=nn[KMG] [X86]
+ used for mtrr cleanup. It is largest continous chunk
+ that could hold holes aka. UC entries.
+
+ mtrr_gran_size=nn[KMG] [X86]
+ Used for mtrr cleanup. It is granularity of mtrr block.
+ Default is 1.
+ Large value could prevent small alignment from
+ using up MTRRs.
+
+ mtrr_spare_reg_nr=n [X86]
+ Format: <integer>
+ Range: 0,7 : spare reg number
+ Default : 1
+ Used for mtrr cleanup. It is spare mtrr entries number.
+ Set to 2 or more if your graphical card needs more.
+
disable_mtrr_trim [X86, Intel and AMD only]
By default the kernel will trim any uncacheable
memory out of your available memory pool based on
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bf07b6f50fa1..07276ac01c20 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -261,36 +261,6 @@ config X86_VOYAGER
If you do not specifically know you have a Voyager based machine,
say N here, otherwise the kernel you build will not be bootable.
-config X86_NUMAQ
- bool "NUMAQ (IBM/Sequent)"
- depends on SMP && X86_32
- select NUMA
- help
- This option is used for getting Linux to run on a (IBM/Sequent) NUMA
- multiquad box. This changes the way that processors are bootstrapped,
- and uses Clustered Logical APIC addressing mode instead of Flat Logical.
- You will need a new lynxer.elf file to flash your firmware with - send
- email to <Martin.Bligh@us.ibm.com>.
-
-config X86_SUMMIT
- bool "Summit/EXA (IBM x440)"
- depends on X86_32 && SMP
- help
- This option is needed for IBM systems that use the Summit/EXA chipset.
- In particular, it is needed for the x440.
-
- If you don't have one of these computers, you should say N here.
- If you want to build a NUMA kernel, you must select ACPI.
-
-config X86_BIGSMP
- bool "Support for other sub-arch SMP systems with more than 8 CPUs"
- depends on X86_32 && SMP
- help
- This option is needed for the systems that have more than 8 CPUs
- and if the system is not of any sub-arch type above.
-
- If you don't have such a system, you should say N here.
-
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
depends on X86_32
@@ -304,12 +274,33 @@ config X86_VISWS
and vice versa. See <file:Documentation/sgi-visws.txt> for details.
config X86_GENERICARCH
- bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+ bool "Generic architecture"
depends on X86_32
help
- This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
- It is intended for a generic binary kernel.
- If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
+ This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+ subarchitectures. It is intended for a generic binary kernel.
+ if you select them all, kernel will probe it one by one. and will
+ fallback to default.
+
+if X86_GENERICARCH
+
+config X86_NUMAQ
+ bool "NUMAQ (IBM/Sequent)"
+ depends on SMP && X86_32
+ select NUMA
+ help
+ This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+ NUMA multiquad box. This changes the way that processors are
+ bootstrapped, and uses Clustered Logical APIC addressing mode instead
+ of Flat Logical. You will need a new lynxer.elf file to flash your
+ firmware with - send email to <Martin.Bligh@us.ibm.com>.
+
+config X86_SUMMIT
+ bool "Summit/EXA (IBM x440)"
+ depends on X86_32 && SMP
+ help
+ This option is needed for IBM systems that use the Summit/EXA chipset.
+ In particular, it is needed for the x440.
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
@@ -317,8 +308,15 @@ config X86_ES7000
help
Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
supposed to run on an IA32-based Unisys ES7000 system.
- Only choose this option if you have such a system, otherwise you
- should say N here.
+
+config X86_BIGSMP
+ bool "Support for big SMP systems with more than 8 CPUs"
+ depends on X86_32 && SMP
+ help
+ This option is needed for the systems that have more than 8 CPUs
+ and if the system is not of any sub-arch type above.
+
+endif
config X86_RDC321X
bool "RDC R-321x SoC"
@@ -911,9 +909,9 @@ config X86_PAE
config NUMA
bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
- default y if (X86_NUMAQ || X86_SUMMIT)
+ default y if (X86_NUMAQ || X86_SUMMIT || X86_GENERICARCH)
help
Enable NUMA (Non Uniform Memory Access) support.
The kernel will try to allocate memory used by a CPU on the
@@ -1090,6 +1088,40 @@ config MTRR
See <file:Documentation/mtrr.txt> for more information.
+config MTRR_SANITIZER
+ def_bool y
+ prompt "MTRR cleanup support"
+ depends on MTRR
+ help
+ Convert MTRR layout from continuous to discrete, so some X driver
+ could add WB entries.
+
+ Say N here if you see bootup problems (boot crash, boot hang,
+ spontaneous reboots).
+
+ Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size
+ could be used to send largest mtrr entry size for continuous block
+ to hold holes (aka. UC entries)
+
+ If unsure, say Y.
+
+config MTRR_SANITIZER_ENABLE_DEFAULT
+ int "MTRR cleanup enable value (0-1)"
+ range 0 1
+ default "0"
+ depends on MTRR_SANITIZER
+ help
+ Enable mtrr cleanup default value
+
+config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
+ int "MTRR cleanup spare reg num (0-7)"
+ range 0 7
+ default "1"
+ depends on MTRR_SANITIZER
+ help
+ mtrr cleanup spare entries default, it can be changed via
+ mtrr_spare_reg_nr=
+
config X86_PAT
bool
prompt "x86 PAT support"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 18363374d51a..253e7a5706d3 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -131,7 +131,7 @@ config 4KSTACKS
config X86_FIND_SMP_CONFIG
def_bool y
- depends on X86_LOCAL_APIC || X86_VOYAGER
+ depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS
depends on X86_32
config X86_MPPARSE
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 3cff3c894cf3..d6650131659e 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -117,29 +117,11 @@ mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager/
mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/
-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default/
-
-# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default/
-
-#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
-mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default/
-
# generic subarchitecture
mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/
-
-# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
-fcore-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
-mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default/
-
# RDC R-321x subarch support
mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x
mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default/
@@ -160,6 +142,7 @@ KBUILD_AFLAGS += $(mflags-y)
head-y := arch/x86/kernel/head_$(BITS).o
head-y += arch/x86/kernel/head$(BITS).o
+head-y += arch/x86/kernel/head.o
head-y += arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 90456cee47c3..ba0be6a25ff7 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -221,10 +221,6 @@ static char *vidmem;
static int vidport;
static int lines, cols;
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
#include "../../../../lib/inflate.c"
static void *malloc(int size)
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index acad32eb4290..53165c97336b 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -13,6 +13,7 @@
*/
#include "boot.h"
+#include <linux/kernel.h>
#define SMAP 0x534d4150 /* ASCII "SMAP" */
@@ -53,7 +54,7 @@ static int detect_memory_e820(void)
count++;
desc++;
- } while (next && count < E820MAX);
+ } while (next && count < ARRAY_SIZE(boot_params.e820_map));
return boot_params.e820_entries = count;
}
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 77807d4769c9..dc3c636d113e 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-extra-y := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
+extra-y := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds
CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
@@ -22,7 +22,7 @@ obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
-obj-y += bootflag.o e820_$(BITS).o
+obj-y += bootflag.o e820_$(BITS).o e820.o
obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
obj-y += alternative.o i8253.o pci-nommu.o
obj-$(CONFIG_X86_64) += bugs_64.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 33c5216fd3e1..caf4ed7ca069 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -338,8 +338,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
#ifdef CONFIG_X86_IO_APIC
-struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-
static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
@@ -860,6 +858,336 @@ static int __init acpi_parse_madt_lapic_entries(void)
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
+#define MP_ISA_BUS 0
+
+#ifdef CONFIG_X86_ES7000
+extern int es7000_plat;
+#endif
+
+static struct {
+ int apic_id;
+ int gsi_base;
+ int gsi_end;
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+static int mp_find_ioapic(int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_ioapic_routing[i].gsi_base)
+ && (gsi <= mp_ioapic_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ return -1;
+}
+
+static u8 __init uniq_ioapic_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return io_apic_get_unique_id(nr_ioapics, id);
+ else
+ return id;
+#else
+ int i;
+ DECLARE_BITMAP(used, 256);
+ bitmap_zero(used, 256);
+ for (i = 0; i < nr_ioapics; i++) {
+ struct mp_config_ioapic *ia = &mp_ioapics[i];
+ __set_bit(ia->mp_apicid, used);
+ }
+ if (!test_bit(id, used))
+ return id;
+ return find_first_zero_bit(used, 256);
+#endif
+}
+
+static int bad_ioapic(unsigned long address)
+{
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+ "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+ panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+ }
+ if (!address) {
+ printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+ " found in table, skipping!\n");
+ return 1;
+ }
+ return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+ int idx = 0;
+
+ if (bad_ioapic(address))
+ return;
+
+ idx = nr_ioapics;
+
+ mp_ioapics[idx].mp_type = MP_IOAPIC;
+ mp_ioapics[idx].mp_flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].mp_apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id);
+#ifdef CONFIG_X86_32
+ mp_ioapics[idx].mp_apicver = io_apic_get_version(idx);
+#else
+ mp_ioapics[idx].mp_apicver = 0;
+#endif
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid;
+ mp_ioapic_routing[idx].gsi_base = gsi_base;
+ mp_ioapic_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid,
+ mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr,
+ mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
+
+ nr_ioapics++;
+}
+
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+{
+ int ioapic = -1;
+ int pin = -1;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ return;
+ pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+ /*
+ * TBD: This check is for faulty timer entries, where the override
+ * erroneously sets the trigger to level, resulting in a HUGE
+ * increase of timer interrupts!
+ */
+ if ((bus_irq == 0) && (trigger == 3))
+ trigger = 1;
+
+ mp_irqs[mp_irq_entries].mp_type = MP_INTSRC;
+ mp_irqs[mp_irq_entries].mp_irqtype = mp_INT;
+ mp_irqs[mp_irq_entries].mp_irqflag = (trigger << 2) | polarity;
+ mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS;
+ mp_irqs[mp_irq_entries].mp_srcbusirq = bus_irq; /* IRQ */
+ mp_irqs[mp_irq_entries].mp_dstapic =
+ mp_ioapics[ioapic].mp_apicid; /* APIC ID */
+ mp_irqs[mp_irq_entries].mp_dstirq = pin; /* INTIN# */
+
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!!\n");
+
+}
+
+void __init mp_config_acpi_legacy_irqs(void)
+{
+ int i = 0;
+ int ioapic = -1;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+ /*
+ * Fabricate the legacy ISA bus (bus #31).
+ */
+ mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+ set_bit(MP_ISA_BUS, mp_bus_not_pci);
+ Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+
+#ifdef CONFIG_X86_ES7000
+ /*
+ * Older generations of ES7000 have no legacy identity mappings
+ */
+ if (es7000_plat == 1)
+ return;
+#endif
+
+ /*
+ * Locate the IOAPIC that manages the ISA IRQs (0-15).
+ */
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ return;
+
+ /*
+ * Use the default configuration for the IRQs 0-15. Unless
+ * overridden by (MADT) interrupt source override entries.
+ */
+ for (i = 0; i < 16; i++) {
+ int idx;
+
+ mp_irqs[mp_irq_entries].mp_type = MP_INTSRC;
+ mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */
+ mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS;
+ mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid;
+
+ for (idx = 0; idx < mp_irq_entries; idx++) {
+ struct mp_config_intsrc *irq = mp_irqs + idx;
+
+ /* Do we already have a mapping for this ISA IRQ? */
+ if (irq->mp_srcbus == MP_ISA_BUS
+ && irq->mp_srcbusirq == i)
+ break;
+
+ /* Do we already have a mapping for this IOAPIC pin */
+ if ((irq->mp_dstapic ==
+ mp_irqs[mp_irq_entries].mp_dstapic) &&
+ (irq->mp_dstirq == i))
+ break;
+ }
+
+ if (idx != mp_irq_entries) {
+ printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+ continue; /* IRQ already used */
+ }
+
+ mp_irqs[mp_irq_entries].mp_irqtype = mp_INT;
+ mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */
+ mp_irqs[mp_irq_entries].mp_dstirq = i;
+
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!!\n");
+ }
+}
+
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
+{
+ int ioapic;
+ int ioapic_pin;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM 4096
+#define IRQ_COMPRESSION_START 64
+
+ static int pci_irq = IRQ_COMPRESSION_START;
+ /*
+ * Mapping between Global System Interrupts, which
+ * represent all possible interrupts, and IRQs
+ * assigned to actual devices.
+ */
+ static int gsi_to_irq[MAX_GSI_NUM];
+#else
+
+ if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+ return gsi;
+#endif
+
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (acpi_gbl_FADT.sci_interrupt == gsi)
+ return gsi;
+
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0) {
+ printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+ return gsi;
+ }
+
+ ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+#ifdef CONFIG_X86_32
+ if (ioapic_renumber_irq)
+ gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
+ printk(KERN_ERR "Invalid reference to IOAPIC pin "
+ "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ ioapic_pin);
+ return gsi;
+ }
+ if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
+ mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
+ return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
+ return gsi;
+#endif
+ }
+
+ set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
+#ifdef CONFIG_X86_32
+ /*
+ * For GSI >= 64, use IRQ compression
+ */
+ if ((gsi >= IRQ_COMPRESSION_START)
+ && (triggering == ACPI_LEVEL_SENSITIVE)) {
+ /*
+ * For PCI devices assign IRQs in order, avoiding gaps
+ * due to unused I/O APIC pins.
+ */
+ int irq = gsi;
+ if (gsi < MAX_GSI_NUM) {
+ /*
+ * Retain the VIA chipset work-around (gsi > 15), but
+ * avoid a problem where the 8254 timer (IRQ0) is setup
+ * via an override (so it's not on pin 0 of the ioapic),
+ * and at the same time, the pin 0 interrupt is a PCI
+ * type. The gsi > 15 test could cause these two pins
+ * to be shared as IRQ0, and they are not shareable.
+ * So test for this condition, and if necessary, avoid
+ * the pin collision.
+ */
+ gsi = pci_irq++;
+ /*
+ * Don't assign IRQ used by ACPI SCI
+ */
+ if (gsi == acpi_gbl_FADT.sci_interrupt)
+ gsi = pci_irq++;
+ gsi_to_irq[irq] = gsi;
+ } else {
+ printk(KERN_ERR "GSI %u is too high\n", gsi);
+ return gsi;
+ }
+ }
+#endif
+ io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ return gsi;
+}
+
+int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+ u32 gsi, int triggering, int polarity)
+{
+ struct mpc_config_intsrc intsrc;
+ int ioapic;
+
+ /* print the entry should happen on mptable identically */
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqtype = mp_INT;
+ intsrc.mpc_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ intsrc.mpc_srcbus = number;
+ intsrc.mpc_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ intsrc.mpc_dstapic = mp_ioapic_routing[ioapic].apic_id;
+ intsrc.mpc_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+ MP_intsrc_info(&intsrc);
+
+ return 0;
+}
+
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 4b99b1bdeb6c..954d67931a50 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -76,6 +76,11 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
*/
int apic_verbosity;
+int pic_mode;
+
+/* Have we found an MP table */
+int smp_found_config;
+
static unsigned int calibration_result;
static int lapic_next_event(unsigned long delta,
@@ -1202,7 +1207,7 @@ void __init init_apic_mappings(void)
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
- ioapic_phys = mp_ioapics[i].mpc_apicaddr;
+ ioapic_phys = mp_ioapics[i].mp_apicaddr;
if (!ioapic_phys) {
printk(KERN_ERR
"WARNING: bogus zero IO-APIC "
@@ -1513,6 +1518,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
*/
cpu = 0;
+ if (apicid > max_physical_apicid)
+ max_physical_apicid = apicid;
+
/*
* Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
* but we need to work other dependencies like SMP_SUSPEND etc
@@ -1520,7 +1528,7 @@ void __cpuinit generic_processor_info(int apicid, int version)
* if (CPU_HOTPLUG_ENABLED || num_processors > 8)
* - Ashok Raj <ashok.raj@intel.com>
*/
- if (num_processors > 8) {
+ if (max_physical_apicid >= 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(version)) {
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 0633cfd0dc29..a4bd8fbb78a9 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -56,6 +56,9 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
*/
int apic_verbosity;
+/* Have we found an MP table */
+int smp_found_config;
+
static struct resource lapic_resource = {
.name = "Local APIC",
.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
@@ -1090,6 +1093,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
*/
cpu = 0;
}
+ if (apicid > max_physical_apicid)
+ max_physical_apicid = apicid;
+
/* are we being called early in kernel startup? */
if (x86_cpu_to_apicid_early_ptr) {
u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 5d241ce94a44..509bd3d9eacd 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -37,7 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = {
static unsigned long smp_changes_mask;
static struct mtrr_state mtrr_state = {};
static int mtrr_state_set;
-static u64 tom2;
+u64 mtrr_tom2;
#undef MODULE_PARAM_PREFIX
#define MODULE_PARAM_PREFIX "mtrr."
@@ -139,8 +139,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
}
}
- if (tom2) {
- if (start >= (1ULL<<32) && (end < tom2))
+ if (mtrr_tom2) {
+ if (start >= (1ULL<<32) && (end < mtrr_tom2))
return MTRR_TYPE_WRBACK;
}
@@ -158,6 +158,20 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
}
+/* fill the MSR pair relating to a var range */
+void fill_mtrr_var_range(unsigned int index,
+ u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi)
+{
+ struct mtrr_var_range *vr;
+
+ vr = mtrr_state.var_ranges;
+
+ vr[index].base_lo = base_lo;
+ vr[index].base_hi = base_hi;
+ vr[index].mask_lo = mask_lo;
+ vr[index].mask_hi = mask_hi;
+}
+
static void
get_fixed_ranges(mtrr_type * frs)
{
@@ -213,13 +227,13 @@ void __init get_mtrr_state(void)
mtrr_state.enabled = (lo & 0xc00) >> 10;
if (amd_special_default_mtrr()) {
- unsigned lo, hi;
+ unsigned low, high;
/* TOP_MEM2 */
- rdmsr(MSR_K8_TOP_MEM2, lo, hi);
- tom2 = hi;
- tom2 <<= 32;
- tom2 |= lo;
- tom2 &= 0xffffff8000000ULL;
+ rdmsr(MSR_K8_TOP_MEM2, low, high);
+ mtrr_tom2 = high;
+ mtrr_tom2 <<= 32;
+ mtrr_tom2 |= low;
+ mtrr_tom2 &= 0xffffff800000ULL;
}
if (mtrr_show) {
int high_width;
@@ -251,9 +265,9 @@ void __init get_mtrr_state(void)
else
printk(KERN_INFO "MTRR %u disabled\n", i);
}
- if (tom2) {
+ if (mtrr_tom2) {
printk(KERN_INFO "TOM2: %016llx aka %lldM\n",
- tom2, tom2>>20);
+ mtrr_tom2, mtrr_tom2>>20);
}
}
mtrr_state_set = 1;
@@ -328,7 +342,7 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
if (lo != msrwords[0] || hi != msrwords[1]) {
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 15 &&
+ (boot_cpu_data.x86 >= 0x0f && boot_cpu_data.x86 <= 0x11) &&
((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK))
k8_enable_fixed_iorrs();
mtrr_wrmsr(msr, msrwords[0], msrwords[1]);
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 6a1e278d9323..0642201784e0 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -37,6 +37,7 @@
#include <linux/smp.h>
#include <linux/cpu.h>
#include <linux/mutex.h>
+#include <linux/sort.h>
#include <asm/e820.h>
#include <asm/mtrr.h>
@@ -609,6 +610,787 @@ static struct sysdev_driver mtrr_sysdev_driver = {
.resume = mtrr_restore,
};
+/* should be related to MTRR_VAR_RANGES nums */
+#define RANGE_NUM 256
+
+struct res_range {
+ unsigned long start;
+ unsigned long end;
+};
+
+static int __init
+add_range(struct res_range *range, int nr_range, unsigned long start,
+ unsigned long end)
+{
+ /* out of slots */
+ if (nr_range >= RANGE_NUM)
+ return nr_range;
+
+ range[nr_range].start = start;
+ range[nr_range].end = end;
+
+ nr_range++;
+
+ return nr_range;
+}
+
+static int __init
+add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
+ unsigned long end)
+{
+ int i;
+
+ /* try to merge it with old one */
+ for (i = 0; i < nr_range; i++) {
+ unsigned long final_start, final_end;
+ unsigned long common_start, common_end;
+
+ if (!range[i].end)
+ continue;
+
+ common_start = max(range[i].start, start);
+ common_end = min(range[i].end, end);
+ if (common_start > common_end + 1)
+ continue;
+
+ final_start = min(range[i].start, start);
+ final_end = max(range[i].end, end);
+
+ range[i].start = final_start;
+ range[i].end = final_end;
+ return nr_range;
+ }
+
+ /* need to add that */
+ return add_range(range, nr_range, start, end);
+}
+
+static void __init
+subtract_range(struct res_range *range, unsigned long start, unsigned long end)
+{
+ int i, j;
+
+ for (j = 0; j < RANGE_NUM; j++) {
+ if (!range[j].end)
+ continue;
+
+ if (start <= range[j].start && end >= range[j].end) {
+ range[j].start = 0;
+ range[j].end = 0;
+ continue;
+ }
+
+ if (start <= range[j].start && end < range[j].end &&
+ range[j].start < end + 1) {
+ range[j].start = end + 1;
+ continue;
+ }
+
+
+ if (start > range[j].start && end >= range[j].end &&
+ range[j].end > start - 1) {
+ range[j].end = start - 1;
+ continue;
+ }
+
+ if (start > range[j].start && end < range[j].end) {
+ /* find the new spare */
+ for (i = 0; i < RANGE_NUM; i++) {
+ if (range[i].end == 0)
+ break;
+ }
+ if (i < RANGE_NUM) {
+ range[i].end = range[j].end;
+ range[i].start = end + 1;
+ } else {
+ printk(KERN_ERR "run of slot in ranges\n");
+ }
+ range[j].end = start - 1;
+ continue;
+ }
+ }
+}
+
+static int __init cmp_range(const void *x1, const void *x2)
+{
+ const struct res_range *r1 = x1;
+ const struct res_range *r2 = x2;
+ long start1, start2;
+
+ start1 = r1->start;
+ start2 = r2->start;
+
+ return start1 - start2;
+}
+
+struct var_mtrr_range_state {
+ unsigned long base_pfn;
+ unsigned long size_pfn;
+ mtrr_type type;
+};
+
+struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+static int __initdata debug_print;
+
+static int __init
+x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
+ unsigned long extra_remove_base,
+ unsigned long extra_remove_size)
+{
+ unsigned long i, base, size;
+ mtrr_type type;
+
+ for (i = 0; i < num_var_ranges; i++) {
+ type = range_state[i].type;
+ if (type != MTRR_TYPE_WRBACK)
+ continue;
+ base = range_state[i].base_pfn;
+ size = range_state[i].size_pfn;
+ nr_range = add_range_with_merge(range, nr_range, base,
+ base + size - 1);
+ }
+ if (debug_print) {
+ printk(KERN_DEBUG "After WB checking\n");
+ for (i = 0; i < nr_range; i++)
+ printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+ range[i].start, range[i].end + 1);
+ }
+
+ /* take out UC ranges */
+ for (i = 0; i < num_var_ranges; i++) {
+ type = range_state[i].type;
+ if (type != MTRR_TYPE_UNCACHABLE)
+ continue;
+ size = range_state[i].size_pfn;
+ if (!size)
+ continue;
+ base = range_state[i].base_pfn;
+ subtract_range(range, base, base + size - 1);
+ }
+ if (extra_remove_size)
+ subtract_range(range, extra_remove_base,
+ extra_remove_base + extra_remove_size - 1);
+
+ /* get new range num */
+ nr_range = 0;
+ for (i = 0; i < RANGE_NUM; i++) {
+ if (!range[i].end)
+ continue;
+ nr_range++;
+ }
+ if (debug_print) {
+ printk(KERN_DEBUG "After UC checking\n");
+ for (i = 0; i < nr_range; i++)
+ printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+ range[i].start, range[i].end + 1);
+ }
+
+ /* sort the ranges */
+ sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+ if (debug_print) {
+ printk(KERN_DEBUG "After sorting\n");
+ for (i = 0; i < nr_range; i++)
+ printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
+ range[i].start, range[i].end + 1);
+ }
+
+ /* clear those is not used */
+ for (i = nr_range; i < RANGE_NUM; i++)
+ memset(&range[i], 0, sizeof(range[i]));
+
+ return nr_range;
+}
+
+static struct res_range __initdata range[RANGE_NUM];
+
+#ifdef CONFIG_MTRR_SANITIZER
+
+static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
+{
+ unsigned long sum;
+ int i;
+
+ sum = 0;
+ for (i = 0; i < nr_range; i++)
+ sum += range[i].end + 1 - range[i].start;
+
+ return sum;
+}
+
+static int enable_mtrr_cleanup __initdata =
+ CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT;
+
+static int __init disable_mtrr_cleanup_setup(char *str)
+{
+ if (enable_mtrr_cleanup != -1)
+ enable_mtrr_cleanup = 0;
+ return 0;
+}
+early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup);
+
+static int __init enable_mtrr_cleanup_setup(char *str)
+{
+ if (enable_mtrr_cleanup != -1)
+ enable_mtrr_cleanup = 1;
+ return 0;
+}
+early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup);
+
+struct var_mtrr_state {
+ unsigned long range_startk;
+ unsigned long range_sizek;
+ unsigned long chunk_sizek;
+ unsigned long gran_sizek;
+ unsigned int reg;
+};
+
+static void __init
+set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
+ unsigned char type, unsigned int address_bits)
+{
+ u32 base_lo, base_hi, mask_lo, mask_hi;
+ u64 base, mask;
+
+ if (!sizek) {
+ fill_mtrr_var_range(reg, 0, 0, 0, 0);
+ return;
+ }
+
+ mask = (1ULL << address_bits) - 1;
+ mask &= ~((((u64)sizek) << 10) - 1);
+
+ base = ((u64)basek) << 10;
+
+ base |= type;
+ mask |= 0x800;
+
+ base_lo = base & ((1ULL<<32) - 1);
+ base_hi = base >> 32;
+
+ mask_lo = mask & ((1ULL<<32) - 1);
+ mask_hi = mask >> 32;
+
+ fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi);
+}
+
+static void __init
+save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
+ unsigned char type)
+{
+ range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10);
+ range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10);
+ range_state[reg].type = type;
+}
+
+static void __init
+set_var_mtrr_all(unsigned int address_bits)
+{
+ unsigned long basek, sizek;
+ unsigned char type;
+ unsigned int reg;
+
+ for (reg = 0; reg < num_var_ranges; reg++) {
+ basek = range_state[reg].base_pfn << (PAGE_SHIFT - 10);
+ sizek = range_state[reg].size_pfn << (PAGE_SHIFT - 10);
+ type = range_state[reg].type;
+
+ set_var_mtrr(reg, basek, sizek, type, address_bits);
+ }
+}
+
+static unsigned int __init
+range_to_mtrr(unsigned int reg, unsigned long range_startk,
+ unsigned long range_sizek, unsigned char type)
+{
+ if (!range_sizek || (reg >= num_var_ranges))
+ return reg;
+
+ while (range_sizek) {
+ unsigned long max_align, align;
+ unsigned long sizek;
+
+ /* Compute the maximum size I can make a range */
+ if (range_startk)
+ max_align = ffs(range_startk) - 1;
+ else
+ max_align = 32;
+ align = fls(range_sizek) - 1;
+ if (align > max_align)
+ align = max_align;
+
+ sizek = 1 << align;
+ if (debug_print)
+ printk(KERN_DEBUG "Setting variable MTRR %d, "
+ "base: %ldMB, range: %ldMB, type %s\n",
+ reg, range_startk >> 10, sizek >> 10,
+ (type == MTRR_TYPE_UNCACHABLE)?"UC":
+ ((type == MTRR_TYPE_WRBACK)?"WB":"Other")
+ );
+ save_var_mtrr(reg++, range_startk, sizek, type);
+ range_startk += sizek;
+ range_sizek -= sizek;
+ if (reg >= num_var_ranges)
+ break;
+ }
+ return reg;
+}
+
+static unsigned __init
+range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
+ unsigned long sizek)
+{
+ unsigned long hole_basek, hole_sizek;
+ unsigned long second_basek, second_sizek;
+ unsigned long range0_basek, range0_sizek;
+ unsigned long range_basek, range_sizek;
+ unsigned long chunk_sizek;
+ unsigned long gran_sizek;
+
+ hole_basek = 0;
+ hole_sizek = 0;
+ second_basek = 0;
+ second_sizek = 0;
+ chunk_sizek = state->chunk_sizek;
+ gran_sizek = state->gran_sizek;
+
+ /* align with gran size, prevent small block used up MTRRs */
+ range_basek = ALIGN(state->range_startk, gran_sizek);
+ if ((range_basek > basek) && basek)
+ return second_sizek;
+ state->range_sizek -= (range_basek - state->range_startk);
+ range_sizek = ALIGN(state->range_sizek, gran_sizek);
+
+ while (range_sizek > state->range_sizek) {
+ range_sizek -= gran_sizek;
+ if (!range_sizek)
+ return 0;
+ }
+ state->range_sizek = range_sizek;
+
+ /* try to append some small hole */
+ range0_basek = state->range_startk;
+ range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
+ if (range0_sizek == state->range_sizek) {
+ if (debug_print)
+ printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
+ range0_basek<<10,
+ (range0_basek + state->range_sizek)<<10);
+ state->reg = range_to_mtrr(state->reg, range0_basek,
+ state->range_sizek, MTRR_TYPE_WRBACK);
+ return 0;
+ }
+
+ range0_sizek -= chunk_sizek;
+ if (range0_sizek && sizek) {
+ while (range0_basek + range0_sizek > (basek + sizek)) {
+ range0_sizek -= chunk_sizek;
+ if (!range0_sizek)
+ break;
+ }
+ }
+
+ if (range0_sizek) {
+ if (debug_print)
+ printk(KERN_DEBUG "range0: %016lx - %016lx\n",
+ range0_basek<<10,
+ (range0_basek + range0_sizek)<<10);
+ state->reg = range_to_mtrr(state->reg, range0_basek,
+ range0_sizek, MTRR_TYPE_WRBACK);
+
+ }
+
+ range_basek = range0_basek + range0_sizek;
+ range_sizek = chunk_sizek;
+
+ if (range_basek + range_sizek > basek &&
+ range_basek + range_sizek <= (basek + sizek)) {
+ /* one hole */
+ second_basek = basek;
+ second_sizek = range_basek + range_sizek - basek;
+ }
+
+ /* if last piece, only could one hole near end */
+ if ((second_basek || !basek) &&
+ range_sizek - (state->range_sizek - range0_sizek) - second_sizek <
+ (chunk_sizek >> 1)) {
+ /*
+ * one hole in middle (second_sizek is 0) or at end
+ * (second_sizek is 0 )
+ */
+ hole_sizek = range_sizek - (state->range_sizek - range0_sizek)
+ - second_sizek;
+ hole_basek = range_basek + range_sizek - hole_sizek
+ - second_sizek;
+ } else {
+ /* fallback for big hole, or several holes */
+ range_sizek = state->range_sizek - range0_sizek;
+ second_basek = 0;
+ second_sizek = 0;
+ }
+
+ if (debug_print)
+ printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10,
+ (range_basek + range_sizek)<<10);
+ state->reg = range_to_mtrr(state->reg, range_basek, range_sizek,
+ MTRR_TYPE_WRBACK);
+ if (hole_sizek) {
+ if (debug_print)
+ printk(KERN_DEBUG "hole: %016lx - %016lx\n",
+ hole_basek<<10, (hole_basek + hole_sizek)<<10);
+ state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek,
+ MTRR_TYPE_UNCACHABLE);
+
+ }
+
+ return second_sizek;
+}
+
+static void __init
+set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn,
+ unsigned long size_pfn)
+{
+ unsigned long basek, sizek;
+ unsigned long second_sizek = 0;
+
+ if (state->reg >= num_var_ranges)
+ return;
+
+ basek = base_pfn << (PAGE_SHIFT - 10);
+ sizek = size_pfn << (PAGE_SHIFT - 10);
+
+ /* See if I can merge with the last range */
+ if ((basek <= 1024) ||
+ (state->range_startk + state->range_sizek == basek)) {
+ unsigned long endk = basek + sizek;
+ state->range_sizek = endk - state->range_startk;
+ return;
+ }
+ /* Write the range mtrrs */
+ if (state->range_sizek != 0)
+ second_sizek = range_to_mtrr_with_hole(state, basek, sizek);
+
+ /* Allocate an msr */
+ state->range_startk = basek + second_sizek;
+ state->range_sizek = sizek - second_sizek;
+}
+
+/* mininum size of mtrr block that can take hole */
+static u64 mtrr_chunk_size __initdata = (256ULL<<20);
+
+static int __init parse_mtrr_chunk_size_opt(char *p)
+{
+ if (!p)
+ return -EINVAL;
+ mtrr_chunk_size = memparse(p, &p);
+ return 0;
+}
+early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt);
+
+/* granity of mtrr of block */
+static u64 mtrr_gran_size __initdata;
+
+static int __init parse_mtrr_gran_size_opt(char *p)
+{
+ if (!p)
+ return -EINVAL;
+ mtrr_gran_size = memparse(p, &p);
+ return 0;
+}
+early_param("mtrr_gran_size", parse_mtrr_gran_size_opt);
+
+static int nr_mtrr_spare_reg __initdata =
+ CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT;
+
+static int __init parse_mtrr_spare_reg(char *arg)
+{
+ if (arg)
+ nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0);
+ return 0;
+}
+
+early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg);
+
+static int __init
+x86_setup_var_mtrrs(struct res_range *range, int nr_range,
+ u64 chunk_size, u64 gran_size)
+{
+ struct var_mtrr_state var_state;
+ int i;
+ int num_reg;
+
+ var_state.range_startk = 0;
+ var_state.range_sizek = 0;
+ var_state.reg = 0;
+ var_state.chunk_sizek = chunk_size >> 10;
+ var_state.gran_sizek = gran_size >> 10;
+
+ memset(range_state, 0, sizeof(range_state));
+
+ /* Write the range etc */
+ for (i = 0; i < nr_range; i++)
+ set_var_mtrr_range(&var_state, range[i].start,
+ range[i].end - range[i].start + 1);
+
+ /* Write the last range */
+ if (var_state.range_sizek != 0)
+ range_to_mtrr_with_hole(&var_state, 0, 0);
+
+ num_reg = var_state.reg;
+ /* Clear out the extra MTRR's */
+ while (var_state.reg < num_var_ranges) {
+ save_var_mtrr(var_state.reg, 0, 0, 0);
+ var_state.reg++;
+ }
+
+ return num_reg;
+}
+
+struct mtrr_cleanup_result {
+ unsigned long gran_sizek;
+ unsigned long chunk_sizek;
+ unsigned long lose_cover_sizek;
+ unsigned int num_reg;
+ int bad;
+};
+
+/*
+ * gran_size: 1M, 2M, ..., 2G
+ * chunk size: gran_size, ..., 4G
+ * so we need (2+13)*6
+ */
+#define NUM_RESULT 90
+#define PSHIFT (PAGE_SHIFT - 10)
+
+static struct mtrr_cleanup_result __initdata result[NUM_RESULT];
+static struct res_range __initdata range_new[RANGE_NUM];
+static unsigned long __initdata min_loss_pfn[RANGE_NUM];
+
+static int __init mtrr_cleanup(unsigned address_bits)
+{
+ unsigned long extra_remove_base, extra_remove_size;
+ unsigned long i, base, size, def, dummy;
+ mtrr_type type;
+ int nr_range, nr_range_new;
+ u64 chunk_size, gran_size;
+ unsigned long range_sums, range_sums_new;
+ int index_good;
+ int num_reg_good;
+
+ /* extra one for all 0 */
+ int num[MTRR_NUM_TYPES + 1];
+
+ if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
+ return 0;
+ rdmsr(MTRRdefType_MSR, def, dummy);
+ def &= 0xff;
+ if (def != MTRR_TYPE_UNCACHABLE)
+ return 0;
+
+ /* get it and store it aside */
+ memset(range_state, 0, sizeof(range_state));
+ for (i = 0; i < num_var_ranges; i++) {
+ mtrr_if->get(i, &base, &size, &type);
+ range_state[i].base_pfn = base;
+ range_state[i].size_pfn = size;
+ range_state[i].type = type;
+ }
+
+ /* check entries number */
+ memset(num, 0, sizeof(num));
+ for (i = 0; i < num_var_ranges; i++) {
+ type = range_state[i].type;
+ size = range_state[i].size_pfn;
+ if (type >= MTRR_NUM_TYPES)
+ continue;
+ if (!size)
+ type = MTRR_NUM_TYPES;
+ num[type]++;
+ }
+
+ /* check if we got UC entries */
+ if (!num[MTRR_TYPE_UNCACHABLE])
+ return 0;
+
+ /* check if we only had WB and UC */
+ if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
+ num_var_ranges - num[MTRR_NUM_TYPES])
+ return 0;
+
+ memset(range, 0, sizeof(range));
+ extra_remove_size = 0;
+ if (mtrr_tom2) {
+ extra_remove_base = 1 << (32 - PAGE_SHIFT);
+ extra_remove_size =
+ (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
+ }
+ nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
+ extra_remove_size);
+ range_sums = sum_ranges(range, nr_range);
+ printk(KERN_INFO "total RAM coverred: %ldM\n",
+ range_sums >> (20 - PAGE_SHIFT));
+
+ if (mtrr_chunk_size && mtrr_gran_size) {
+ int num_reg;
+
+ debug_print = 1;
+ /* convert ranges to var ranges state */
+ num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size,
+ mtrr_gran_size);
+
+ /* we got new setting in range_state, check it */
+ memset(range_new, 0, sizeof(range_new));
+ nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
+ extra_remove_base,
+ extra_remove_size);
+ range_sums_new = sum_ranges(range_new, nr_range_new);
+
+ i = 0;
+ result[i].chunk_sizek = mtrr_chunk_size >> 10;
+ result[i].gran_sizek = mtrr_gran_size >> 10;
+ result[i].num_reg = num_reg;
+ if (range_sums < range_sums_new) {
+ result[i].lose_cover_sizek =
+ (range_sums_new - range_sums) << PSHIFT;
+ result[i].bad = 1;
+ } else
+ result[i].lose_cover_sizek =
+ (range_sums - range_sums_new) << PSHIFT;
+
+ printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
+ result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10,
+ result[i].chunk_sizek >> 10);
+ printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n",
+ result[i].num_reg, result[i].bad?"-":"",
+ result[i].lose_cover_sizek >> 10);
+ if (!result[i].bad) {
+ set_var_mtrr_all(address_bits);
+ return 1;
+ }
+ printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, "
+ "will find optimal one\n");
+ debug_print = 0;
+ memset(result, 0, sizeof(result[0]));
+ }
+
+ i = 0;
+ memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn));
+ memset(result, 0, sizeof(result));
+ for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) {
+ for (chunk_size = gran_size; chunk_size < (1ULL<<33);
+ chunk_size <<= 1) {
+ int num_reg;
+
+ if (debug_print)
+ printk(KERN_INFO
+ "\ngran_size: %lldM chunk_size_size: %lldM\n",
+ gran_size >> 20, chunk_size >> 20);
+ if (i >= NUM_RESULT)
+ continue;
+
+ /* convert ranges to var ranges state */
+ num_reg = x86_setup_var_mtrrs(range, nr_range,
+ chunk_size, gran_size);
+
+ /* we got new setting in range_state, check it */
+ memset(range_new, 0, sizeof(range_new));
+ nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
+ extra_remove_base, extra_remove_size);
+ range_sums_new = sum_ranges(range_new, nr_range_new);
+
+ result[i].chunk_sizek = chunk_size >> 10;
+ result[i].gran_sizek = gran_size >> 10;
+ result[i].num_reg = num_reg;
+ if (range_sums < range_sums_new) {
+ result[i].lose_cover_sizek =
+ (range_sums_new - range_sums) << PSHIFT;
+ result[i].bad = 1;
+ } else
+ result[i].lose_cover_sizek =
+ (range_sums - range_sums_new) << PSHIFT;
+
+ /* double check it */
+ if (!result[i].bad && !result[i].lose_cover_sizek) {
+ if (nr_range_new != nr_range ||
+ memcmp(range, range_new, sizeof(range)))
+ result[i].bad = 1;
+ }
+
+ if (!result[i].bad && (range_sums - range_sums_new <
+ min_loss_pfn[num_reg])) {
+ min_loss_pfn[num_reg] =
+ range_sums - range_sums_new;
+ }
+ i++;
+ }
+ }
+
+ /* print out all */
+ for (i = 0; i < NUM_RESULT; i++) {
+ printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
+ result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10,
+ result[i].chunk_sizek >> 10);
+ printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n",
+ result[i].num_reg, result[i].bad?"-":"",
+ result[i].lose_cover_sizek >> 10);
+ }
+
+ /* try to find the optimal index */
+ if (nr_mtrr_spare_reg >= num_var_ranges)
+ nr_mtrr_spare_reg = num_var_ranges - 1;
+ num_reg_good = -1;
+ for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
+ if (!min_loss_pfn[i]) {
+ num_reg_good = i;
+ break;
+ }
+ }
+
+ index_good = -1;
+ if (num_reg_good != -1) {
+ for (i = 0; i < NUM_RESULT; i++) {
+ if (!result[i].bad &&
+ result[i].num_reg == num_reg_good &&
+ !result[i].lose_cover_sizek) {
+ index_good = i;
+ break;
+ }
+ }
+ }
+
+ if (index_good != -1) {
+ printk(KERN_INFO "Found optimal setting for mtrr clean up\n");
+ i = index_good;
+ printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t",
+ result[i].gran_sizek >> 10,
+ result[i].chunk_sizek >> 10);
+ printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n",
+ result[i].num_reg,
+ result[i].lose_cover_sizek >> 10);
+ /* convert ranges to var ranges state */
+ chunk_size = result[i].chunk_sizek;
+ chunk_size <<= 10;
+ gran_size = result[i].gran_sizek;
+ gran_size <<= 10;
+ debug_print = 1;
+ x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
+ set_var_mtrr_all(address_bits);
+ return 1;
+ }
+
+ printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n");
+ printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n");
+
+ return 0;
+}
+#else
+static int __init mtrr_cleanup(unsigned address_bits)
+{
+ return 0;
+}
+#endif
+
+static int __initdata changed_by_mtrr_cleanup;
+
static int disable_mtrr_trim;
static int __init disable_mtrr_trim_setup(char *str)
@@ -648,6 +1430,19 @@ int __init amd_special_default_mtrr(void)
return 0;
}
+static u64 __init real_trim_memory(unsigned long start_pfn,
+ unsigned long limit_pfn)
+{
+ u64 trim_start, trim_size;
+ trim_start = start_pfn;
+ trim_start <<= PAGE_SHIFT;
+ trim_size = limit_pfn;
+ trim_size <<= PAGE_SHIFT;
+ trim_size -= trim_start;
+
+ return update_memory_range(trim_start, trim_size, E820_RAM,
+ E820_RESERVED);
+}
/**
* mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
* @end_pfn: ending page frame number
@@ -663,8 +1458,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
{
unsigned long i, base, size, highest_pfn = 0, def, dummy;
mtrr_type type;
- u64 trim_start, trim_size;
+ int nr_range;
+ u64 total_trim_size;
+ /* extra one for all 0 */
+ int num[MTRR_NUM_TYPES + 1];
/*
* Make sure we only trim uncachable memory on machines that
* support the Intel MTRR architecture:
@@ -676,14 +1474,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
if (def != MTRR_TYPE_UNCACHABLE)
return 0;
- if (amd_special_default_mtrr())
- return 0;
+ /* get it and store it aside */
+ memset(range_state, 0, sizeof(range_state));
+ for (i = 0; i < num_var_ranges; i++) {
+ mtrr_if->get(i, &base, &size, &type);
+ range_state[i].base_pfn = base;
+ range_state[i].size_pfn = size;
+ range_state[i].type = type;
+ }
/* Find highest cached pfn */
for (i = 0; i < num_var_ranges; i++) {
- mtrr_if->get(i, &base, &size, &type);
+ type = range_state[i].type;
if (type != MTRR_TYPE_WRBACK)
continue;
+ base = range_state[i].base_pfn;
+ size = range_state[i].size_pfn;
if (highest_pfn < base + size)
highest_pfn = base + size;
}
@@ -698,22 +1504,65 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
return 0;
}
- if (highest_pfn < end_pfn) {
+ /* check entries number */
+ memset(num, 0, sizeof(num));
+ for (i = 0; i < num_var_ranges; i++) {
+ type = range_state[i].type;
+ if (type >= MTRR_NUM_TYPES)
+ continue;
+ size = range_state[i].size_pfn;
+ if (!size)
+ type = MTRR_NUM_TYPES;
+ num[type]++;
+ }
+
+ /* no entry for WB? */
+ if (!num[MTRR_TYPE_WRBACK])
+ return 0;
+
+ /* check if we only had WB and UC */
+ if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
+ num_var_ranges - num[MTRR_NUM_TYPES])
+ return 0;
+
+ memset(range, 0, sizeof(range));
+ nr_range = 0;
+ if (mtrr_tom2) {
+ range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT));
+ range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1;
+ if (highest_pfn < range[nr_range].end + 1)
+ highest_pfn = range[nr_range].end + 1;
+ nr_range++;
+ }
+ nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0);
+
+ total_trim_size = 0;
+ /* check the head */
+ if (range[0].start)
+ total_trim_size += real_trim_memory(0, range[0].start);
+ /* check the holes */
+ for (i = 0; i < nr_range - 1; i++) {
+ if (range[i].end + 1 < range[i+1].start)
+ total_trim_size += real_trim_memory(range[i].end + 1,
+ range[i+1].start);
+ }
+ /* check the top */
+ i = nr_range - 1;
+ if (range[i].end + 1 < end_pfn)
+ total_trim_size += real_trim_memory(range[i].end + 1,
+ end_pfn);
+
+ if (total_trim_size) {
printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover"
- " all of memory, losing %luMB of RAM.\n",
- (end_pfn - highest_pfn) >> (20 - PAGE_SHIFT));
+ " all of memory, losing %lluMB of RAM.\n",
+ total_trim_size >> 20);
- WARN_ON(1);
+ if (!changed_by_mtrr_cleanup)
+ WARN_ON(1);
printk(KERN_INFO "update e820 for mtrr\n");
- trim_start = highest_pfn;
- trim_start <<= PAGE_SHIFT;
- trim_size = end_pfn;
- trim_size <<= PAGE_SHIFT;
- trim_size -= trim_start;
- update_memory_range(trim_start, trim_size, E820_RAM,
- E820_RESERVED);
update_e820();
+
return 1;
}
@@ -729,18 +1578,21 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
*/
void __init mtrr_bp_init(void)
{
+ u32 phys_addr;
init_ifs();
+ phys_addr = 32;
+
if (cpu_has_mtrr) {
mtrr_if = &generic_mtrr_ops;
size_or_mask = 0xff000000; /* 36 bits */
size_and_mask = 0x00f00000;
+ phys_addr = 36;
/* This is an AMD specific MSR, but we assume(hope?) that
Intel will implement it to when they extend the address
bus of the Xeon. */
if (cpuid_eax(0x80000000) >= 0x80000008) {
- u32 phys_addr;
phys_addr = cpuid_eax(0x80000008) & 0xff;
/* CPUID workaround for Intel 0F33/0F34 CPU */
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
@@ -758,6 +1610,7 @@ void __init mtrr_bp_init(void)
don't support PAE */
size_or_mask = 0xfff00000; /* 32 bits */
size_and_mask = 0;
+ phys_addr = 32;
}
} else {
switch (boot_cpu_data.x86_vendor) {
@@ -791,8 +1644,15 @@ void __init mtrr_bp_init(void)
if (mtrr_if) {
set_num_var_ranges();
init_table();
- if (use_intel())
+ if (use_intel()) {
get_mtrr_state();
+
+ if (mtrr_cleanup(phys_addr)) {
+ changed_by_mtrr_cleanup = 1;
+ mtrr_if->set_all();
+ }
+
+ }
}
}
@@ -829,9 +1689,10 @@ static int __init mtrr_init_finialize(void)
{
if (!mtrr_if)
return 0;
- if (use_intel())
- mtrr_state_warn();
- else {
+ if (use_intel()) {
+ if (!changed_by_mtrr_cleanup)
+ mtrr_state_warn();
+ } else {
/* The CPUs haven't MTRR and seem to not support SMP. They have
* specific drivers, we use a tricky method to support
* suspend/resume for them.
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 2cc77eb6fea3..2dc4ec656b23 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -81,6 +81,8 @@ void set_mtrr_done(struct set_mtrr_context *ctxt);
void set_mtrr_cache_disable(struct set_mtrr_context *ctxt);
void set_mtrr_prepare_save(struct set_mtrr_context *ctxt);
+void fill_mtrr_var_range(unsigned int index,
+ u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
void get_mtrr_state(void);
extern void set_mtrr_ops(struct mtrr_ops * ops);
@@ -92,6 +94,7 @@ extern struct mtrr_ops * mtrr_if;
#define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1)
extern unsigned int num_var_ranges;
+extern u64 mtrr_tom2;
void mtrr_state_warn(void);
const char *mtrr_attrib_to_str(int x);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
new file mode 100644
index 000000000000..a706e9057ba5
--- /dev/null
+++ b/arch/x86/kernel/e820.c
@@ -0,0 +1,896 @@
+/*
+ * Handle the memory map.
+ * The functions here do the job until bootmem takes over.
+ *
+ * Getting sanitize_e820_map() in sync with i386 version by applying change:
+ * - Provisions for empty E820 memory regions (reported by certain BIOSes).
+ * Alex Achenbach <xela@slit.de>, December 2002.
+ * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/string.h>
+#include <linux/kexec.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <linux/suspend.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/e820.h>
+#include <asm/proto.h>
+#include <asm/setup.h>
+#include <asm/trampoline.h>
+
+struct e820map e820;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0xaeedbabe;
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
+
+/*
+ * This function checks if any part of the range <start,end> is mapped
+ * with type.
+ */
+int
+e820_any_mapped(u64 start, u64 end, unsigned type)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ if (type && ei->type != type)
+ continue;
+ if (ei->addr >= end || ei->addr + ei->size <= start)
+ continue;
+ return 1;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(e820_any_mapped);
+
+/*
+ * This function checks if the entire range <start,end> is mapped with type.
+ *
+ * Note: this function only works correct if the e820 table is sorted and
+ * not-overlapping, which is the case
+ */
+int __init e820_all_mapped(u64 start, u64 end, unsigned type)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ if (type && ei->type != type)
+ continue;
+ /* is the region (part) in overlap with the current region ?*/
+ if (ei->addr >= end || ei->addr + ei->size <= start)
+ continue;
+
+ /* if the region is at the beginning of <start,end> we move
+ * start to the end of the region since it's ok until there
+ */
+ if (ei->addr <= start)
+ start = ei->addr + ei->size;
+ /*
+ * if start is now at or beyond end, we're done, full
+ * coverage
+ */
+ if (start >= end)
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Add a memory region to the kernel e820 map.
+ */
+void __init add_memory_region(u64 start, u64 size, int type)
+{
+ int x = e820.nr_map;
+
+ if (x == ARRAY_SIZE(e820.map)) {
+ printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+ return;
+ }
+
+ e820.map[x].addr = start;
+ e820.map[x].size = size;
+ e820.map[x].type = type;
+ e820.nr_map++;
+}
+
+void __init e820_print_map(char *who)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
+ (unsigned long long) e820.map[i].addr,
+ (unsigned long long)
+ (e820.map[i].addr + e820.map[i].size));
+ switch (e820.map[i].type) {
+ case E820_RAM:
+ printk(KERN_CONT "(usable)\n");
+ break;
+ case E820_RESERVED:
+ printk(KERN_CONT "(reserved)\n");
+ break;
+ case E820_ACPI:
+ printk(KERN_CONT "(ACPI data)\n");
+ break;
+ case E820_NVS:
+ printk(KERN_CONT "(ACPI NVS)\n");
+ break;
+ default:
+ printk(KERN_CONT "type %u\n", e820.map[i].type);
+ break;
+ }
+ }
+}
+
+/*
+ * Sanitize the BIOS e820 map.
+ *
+ * Some e820 responses include overlapping entries. The following
+ * replaces the original e820 map with a new one, removing overlaps,
+ * and resolving conflicting memory types in favor of highest
+ * numbered type.
+ *
+ * The input parameter biosmap points to an array of 'struct
+ * e820entry' which on entry has elements in the range [0, *pnr_map)
+ * valid, and which has space for up to max_nr_map entries.
+ * On return, the resulting sanitized e820 map entries will be in
+ * overwritten in the same location, starting at biosmap.
+ *
+ * The integer pointed to by pnr_map must be valid on entry (the
+ * current number of valid entries located at biosmap) and will
+ * be updated on return, with the new number of valid entries
+ * (something no more than max_nr_map.)
+ *
+ * The return value from sanitize_e820_map() is zero if it
+ * successfully 'sanitized' the map entries passed in, and is -1
+ * if it did nothing, which can happen if either of (1) it was
+ * only passed one map entry, or (2) any of the input map entries
+ * were invalid (start + size < start, meaning that the size was
+ * so big the described memory range wrapped around through zero.)
+ *
+ * Visually we're performing the following
+ * (1,2,3,4 = memory types)...
+ *
+ * Sample memory map (w/overlaps):
+ * ____22__________________
+ * ______________________4_
+ * ____1111________________
+ * _44_____________________
+ * 11111111________________
+ * ____________________33__
+ * ___________44___________
+ * __________33333_________
+ * ______________22________
+ * ___________________2222_
+ * _________111111111______
+ * _____________________11_
+ * _________________4______
+ *
+ * Sanitized equivalent (no overlap):
+ * 1_______________________
+ * _44_____________________
+ * ___1____________________
+ * ____22__________________
+ * ______11________________
+ * _________1______________
+ * __________3_____________
+ * ___________44___________
+ * _____________33_________
+ * _______________2________
+ * ________________1_______
+ * _________________4______
+ * ___________________2____
+ * ____________________33__
+ * ______________________4_
+ */
+
+int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map,
+ int *pnr_map)
+{
+ struct change_member {
+ struct e820entry *pbios; /* pointer to original bios entry */
+ unsigned long long addr; /* address for this change point */
+ };
+static struct change_member change_point_list[2*E820_X_MAX] __initdata;
+static struct change_member *change_point[2*E820_X_MAX] __initdata;
+static struct e820entry *overlap_list[E820_X_MAX] __initdata;
+static struct e820entry new_bios[E820_X_MAX] __initdata;
+ struct change_member *change_tmp;
+ unsigned long current_type, last_type;
+ unsigned long long last_addr;
+ int chgidx, still_changing;
+ int overlap_entries;
+ int new_bios_entry;
+ int old_nr, new_nr, chg_nr;
+ int i;
+
+ /* if there's only one memory region, don't bother */
+ if (*pnr_map < 2)
+ return -1;
+
+ old_nr = *pnr_map;
+ BUG_ON(old_nr > max_nr_map);
+
+ /* bail out if we find any unreasonable addresses in bios map */
+ for (i = 0; i < old_nr; i++)
+ if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
+ return -1;
+
+ /* create pointers for initial change-point information (for sorting) */
+ for (i = 0; i < 2 * old_nr; i++)
+ change_point[i] = &change_point_list[i];
+
+ /* record all known change-points (starting and ending addresses),
+ omitting those that are for empty memory regions */
+ chgidx = 0;
+ for (i = 0; i < old_nr; i++) {
+ if (biosmap[i].size != 0) {
+ change_point[chgidx]->addr = biosmap[i].addr;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ change_point[chgidx]->addr = biosmap[i].addr +
+ biosmap[i].size;
+ change_point[chgidx++]->pbios = &biosmap[i];
+ }
+ }
+ chg_nr = chgidx;
+
+ /* sort change-point list by memory addresses (low -> high) */
+ still_changing = 1;
+ while (still_changing) {
+ still_changing = 0;
+ for (i = 1; i < chg_nr; i++) {
+ unsigned long long curaddr, lastaddr;
+ unsigned long long curpbaddr, lastpbaddr;
+
+ curaddr = change_point[i]->addr;
+ lastaddr = change_point[i - 1]->addr;
+ curpbaddr = change_point[i]->pbios->addr;
+ lastpbaddr = change_point[i - 1]->pbios->addr;
+
+ /*
+ * swap entries, when:
+ *
+ * curaddr > lastaddr or
+ * curaddr == lastaddr and curaddr == curpbaddr and
+ * lastaddr != lastpbaddr
+ */
+ if (curaddr < lastaddr ||
+ (curaddr == lastaddr && curaddr == curpbaddr &&
+ lastaddr != lastpbaddr)) {
+ change_tmp = change_point[i];
+ change_point[i] = change_point[i-1];
+ change_point[i-1] = change_tmp;
+ still_changing = 1;
+ }
+ }
+ }
+
+ /* create a new bios memory map, removing overlaps */
+ overlap_entries = 0; /* number of entries in the overlap table */
+ new_bios_entry = 0; /* index for creating new bios map entries */
+ last_type = 0; /* start with undefined memory type */
+ last_addr = 0; /* start with 0 as last starting address */
+
+ /* loop through change-points, determining affect on the new bios map */
+ for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+ /* keep track of all overlapping bios entries */
+ if (change_point[chgidx]->addr ==
+ change_point[chgidx]->pbios->addr) {
+ /*
+ * add map entry to overlap list (> 1 entry
+ * implies an overlap)
+ */
+ overlap_list[overlap_entries++] =
+ change_point[chgidx]->pbios;
+ } else {
+ /*
+ * remove entry from list (order independent,
+ * so swap with last)
+ */
+ for (i = 0; i < overlap_entries; i++) {
+ if (overlap_list[i] ==
+ change_point[chgidx]->pbios)
+ overlap_list[i] =
+ overlap_list[overlap_entries-1];
+ }
+ overlap_entries--;
+ }
+ /*
+ * if there are overlapping entries, decide which
+ * "type" to use (larger value takes precedence --
+ * 1=usable, 2,3,4,4+=unusable)
+ */
+ current_type = 0;
+ for (i = 0; i < overlap_entries; i++)
+ if (overlap_list[i]->type > current_type)
+ current_type = overlap_list[i]->type;
+ /*
+ * continue building up new bios map based on this
+ * information
+ */
+ if (current_type != last_type) {
+ if (last_type != 0) {
+ new_bios[new_bios_entry].size =
+ change_point[chgidx]->addr - last_addr;
+ /*
+ * move forward only if the new size
+ * was non-zero
+ */
+ if (new_bios[new_bios_entry].size != 0)
+ /*
+ * no more space left for new
+ * bios entries ?
+ */
+ if (++new_bios_entry >= max_nr_map)
+ break;
+ }
+ if (current_type != 0) {
+ new_bios[new_bios_entry].addr =
+ change_point[chgidx]->addr;
+ new_bios[new_bios_entry].type = current_type;
+ last_addr = change_point[chgidx]->addr;
+ }
+ last_type = current_type;
+ }
+ }
+ /* retain count for new bios entries */
+ new_nr = new_bios_entry;
+
+ /* copy new bios mapping into original location */
+ memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
+ *pnr_map = new_nr;
+
+ return 0;
+}
+
+/*
+ * Copy the BIOS e820 map into a safe place.
+ *
+ * Sanity-check it while we're at it..
+ *
+ * If we're lucky and live on a modern system, the setup code
+ * will have given us a memory map that we can use to properly
+ * set up memory. If we aren't, we'll fake a memory map.
+ */
+int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
+{
+ /* Only one memory region (or negative)? Ignore it */
+ if (nr_map < 2)
+ return -1;
+
+ do {
+ u64 start = biosmap->addr;
+ u64 size = biosmap->size;
+ u64 end = start + size;
+ u32 type = biosmap->type;
+
+ /* Overflow in 64 bits? Ignore the memory map. */
+ if (start > end)
+ return -1;
+
+ add_memory_region(start, size, type);
+ } while (biosmap++, --nr_map);
+ return 0;
+}
+
+u64 __init update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type)
+{
+ int i;
+ u64 real_updated_size = 0;
+
+ BUG_ON(old_type == new_type);
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ u64 final_start, final_end;
+ if (ei->type != old_type)
+ continue;
+ /* totally covered? */
+ if (ei->addr >= start &&
+ (ei->addr + ei->size) <= (start + size)) {
+ ei->type = new_type;
+ real_updated_size += ei->size;
+ continue;
+ }
+ /* partially covered */
+ final_start = max(start, ei->addr);
+ final_end = min(start + size, ei->addr + ei->size);
+ if (final_start >= final_end)
+ continue;
+ add_memory_region(final_start, final_end - final_start,
+ new_type);
+ real_updated_size += final_end - final_start;
+ }
+ return real_updated_size;
+}
+
+void __init update_e820(void)
+{
+ int nr_map;
+
+ nr_map = e820.nr_map;
+ if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map))
+ return;
+ e820.nr_map = nr_map;
+ printk(KERN_INFO "modified physical RAM map:\n");
+ e820_print_map("modified");
+}
+
+/*
+ * Search for the biggest gap in the low 32 bits of the e820
+ * memory space. We pass this space to PCI to assign MMIO resources
+ * for hotplug or unconfigured devices in.
+ * Hopefully the BIOS let enough space left.
+ */
+__init void e820_setup_gap(void)
+{
+ unsigned long gapstart, gapsize, round;
+ unsigned long long last;
+ int i;
+ int found = 0;
+
+ last = 0x100000000ull;
+ gapstart = 0x10000000;
+ gapsize = 0x400000;
+ i = e820.nr_map;
+ while (--i >= 0) {
+ unsigned long long start = e820.map[i].addr;
+ unsigned long long end = start + e820.map[i].size;
+
+ /*
+ * Since "last" is at most 4GB, we know we'll
+ * fit in 32 bits if this condition is true
+ */
+ if (last > end) {
+ unsigned long gap = last - end;
+
+ if (gap > gapsize) {
+ gapsize = gap;
+ gapstart = end;
+ found = 1;
+ }
+ }
+ if (start < last)
+ last = start;
+ }
+
+#ifdef CONFIG_X86_64
+ if (!found) {
+ gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
+ printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
+ "address range\n"
+ KERN_ERR "PCI: Unassigned devices with 32bit resource "
+ "registers may break!\n");
+ }
+#endif
+
+ /*
+ * See how much we want to round up: start off with
+ * rounding to the next 1MB area.
+ */
+ round = 0x100000;
+ while ((gapsize >> 4) > round)
+ round += round;
+ /* Fun with two's complement */
+ pci_mem_start = (gapstart + round) & -round;
+
+ printk(KERN_INFO
+ "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
+ pci_mem_start, gapstart, gapsize);
+}
+
+#if defined(CONFIG_X86_64) || \
+ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+/**
+ * Find the ranges of physical addresses that do not correspond to
+ * e820 RAM areas and mark the corresponding pages as nosave for
+ * hibernation (32 bit) or software suspend and suspend to RAM (64 bit).
+ *
+ * This function requires the e820 map to be sorted and without any
+ * overlapping entries and assumes the first e820 area to be RAM.
+ */
+void __init e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+ int i;
+ unsigned long pfn;
+
+ pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size);
+ for (i = 1; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+
+ if (pfn < PFN_UP(ei->addr))
+ register_nosave_region(pfn, PFN_UP(ei->addr));
+
+ pfn = PFN_DOWN(ei->addr + ei->size);
+ if (ei->type != E820_RAM)
+ register_nosave_region(PFN_UP(ei->addr), pfn);
+
+ if (pfn >= limit_pfn)
+ break;
+ }
+}
+#endif
+
+/*
+ * Early reserved memory areas.
+ */
+#define MAX_EARLY_RES 20
+
+struct early_res {
+ u64 start, end;
+ char name[16];
+};
+static struct early_res early_res[MAX_EARLY_RES] __initdata = {
+ { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE)
+ { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
+#endif
+#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
+ /*
+ * But first pinch a few for the stack/trampoline stuff
+ * FIXME: Don't need the extra page at 4K, but need to fix
+ * trampoline before removing it. (see the GDT stuff)
+ */
+ { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" },
+ /*
+ * Has to be in very low memory so we can execute
+ * real-mode AP code.
+ */
+ { TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" },
+#endif
+ {}
+};
+
+static int __init find_overlapped_early(u64 start, u64 end)
+{
+ int i;
+ struct early_res *r;
+
+ for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+ r = &early_res[i];
+ if (end > r->start && start < r->end)
+ break;
+ }
+
+ return i;
+}
+
+void __init reserve_early(u64 start, u64 end, char *name)
+{
+ int i;
+ struct early_res *r;
+
+ i = find_overlapped_early(start, end);
+ if (i >= MAX_EARLY_RES)
+ panic("Too many early reservations");
+ r = &early_res[i];
+ if (r->end)
+ panic("Overlapping early reservations "
+ "%llx-%llx %s to %llx-%llx %s\n",
+ start, end - 1, name?name:"", r->start,
+ r->end - 1, r->name);
+ r->start = start;
+ r->end = end;
+ if (name)
+ strncpy(r->name, name, sizeof(r->name) - 1);
+}
+
+void __init free_early(u64 start, u64 end)
+{
+ struct early_res *r;
+ int i, j;
+
+ i = find_overlapped_early(start, end);
+ r = &early_res[i];
+ if (i >= MAX_EARLY_RES || r->end != end || r->start != start)
+ panic("free_early on not reserved area: %llx-%llx!",
+ start, end - 1);
+
+ for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
+ ;
+
+ memmove(&early_res[i], &early_res[i + 1],
+ (j - 1 - i) * sizeof(struct early_res));
+
+ early_res[j - 1].end = 0;
+}
+
+int __init page_is_reserved_early(unsigned long pagenr)
+{
+ u64 start = (u64)pagenr << PAGE_SHIFT;
+ int i;
+ struct early_res *r;
+
+ i = find_overlapped_early(start, start + PAGE_SIZE);
+ r = &early_res[i];
+ return (i < MAX_EARLY_RES && r->end);
+}
+
+void __init early_res_to_bootmem(u64 start, u64 end)
+{
+ int i;
+ u64 final_start, final_end;
+ for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+ struct early_res *r = &early_res[i];
+ final_start = max(start, r->start);
+ final_end = min(end, r->end);
+ if (final_start >= final_end)
+ continue;
+ printk(KERN_INFO " early res: %d [%llx-%llx] %s\n", i,
+ final_start, final_end - 1, r->name);
+#ifdef CONFIG_X86_64
+ reserve_bootmem_generic(final_start, final_end - final_start);
+#else
+ reserve_bootmem(final_start, final_end - final_start,
+ BOOTMEM_DEFAULT);
+#endif
+ }
+}
+
+/* Check for already reserved areas */
+static inline int __init bad_addr(u64 *addrp, u64 size, u64 align)
+{
+ int i;
+ u64 addr = *addrp;
+ int changed = 0;
+ struct early_res *r;
+again:
+ i = find_overlapped_early(addr, addr + size);
+ r = &early_res[i];
+ if (i < MAX_EARLY_RES && r->end) {
+ *addrp = addr = round_up(r->end, align);
+ changed = 1;
+ goto again;
+ }
+ return changed;
+}
+
+/* Check for already reserved areas */
+static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align)
+{
+ int i;
+ u64 addr = *addrp, last;
+ u64 size = *sizep;
+ int changed = 0;
+again:
+ last = addr + size;
+ for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+ struct early_res *r = &early_res[i];
+ if (last > r->start && addr < r->start) {
+ size = r->start - addr;
+ changed = 1;
+ goto again;
+ }
+ if (last > r->end && addr < r->end) {
+ addr = round_up(r->end, align);
+ size = last - addr;
+ changed = 1;
+ goto again;
+ }
+ if (last <= r->end && addr >= r->start) {
+ (*sizep)++;
+ return 0;
+ }
+ }
+ if (changed) {
+ *addrp = addr;
+ *sizep = size;
+ }
+ return changed;
+}
+
+/*
+ * Find a free area with specified alignment in a specific range.
+ */
+u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ u64 addr, last;
+ u64 ei_last;
+
+ if (ei->type != E820_RAM)
+ continue;
+ addr = round_up(ei->addr, align);
+ ei_last = ei->addr + ei->size;
+ if (addr < start)
+ addr = round_up(start, align);
+ if (addr >= ei_last)
+ continue;
+ while (bad_addr(&addr, size, align) && addr+size <= ei_last)
+ ;
+ last = addr + size;
+ if (last > ei_last)
+ continue;
+ if (last > end)
+ continue;
+ return addr;
+ }
+ return -1ULL;
+}
+
+/*
+ * Find next free range after *start
+ */
+u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ u64 addr, last;
+ u64 ei_last;
+
+ if (ei->type != E820_RAM)
+ continue;
+ addr = round_up(ei->addr, align);
+ ei_last = ei->addr + ei->size;
+ if (addr < start)
+ addr = round_up(start, align);
+ if (addr >= ei_last)
+ continue;
+ *sizep = ei_last - addr;
+ while (bad_addr_size(&addr, sizep, align) &&
+ addr + *sizep <= ei_last)
+ ;
+ last = addr + *sizep;
+ if (last > ei_last)
+ continue;
+ return addr;
+ }
+ return -1UL;
+
+}
+
+/*
+ * pre allocated 4k and reserved it in e820
+ */
+u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
+{
+ u64 size = 0;
+ u64 addr;
+ u64 start;
+
+ start = startt;
+ while (size < sizet)
+ start = find_e820_area_size(start, &size, align);
+
+ if (size < sizet)
+ return 0;
+
+ addr = round_down(start + size - sizet, align);
+ update_memory_range(addr, sizet, E820_RAM, E820_RESERVED);
+ printk(KERN_INFO "update e820 for early_reserve_e820\n");
+ update_e820();
+
+ return addr;
+}
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_X86_PAE
+# define MAX_ARCH_PFN (1ULL<<(36-PAGE_SHIFT))
+# else
+# define MAX_ARCH_PFN (1ULL<<(32-PAGE_SHIFT))
+# endif
+#else /* CONFIG_X86_32 */
+# define MAX_ARCH_PFN MAXMEM>>PAGE_SHIFT
+#endif
+
+/*
+ * Last pfn which the user wants to use.
+ */
+unsigned long __initdata end_user_pfn = MAX_ARCH_PFN;
+
+/*
+ * Find the highest page frame number we have available
+ */
+unsigned long __init e820_end_of_ram(void)
+{
+ unsigned long last_pfn;
+ unsigned long max_arch_pfn = MAX_ARCH_PFN;
+
+ last_pfn = find_max_pfn_with_active_regions();
+
+ if (last_pfn > max_arch_pfn)
+ last_pfn = max_arch_pfn;
+ if (last_pfn > end_user_pfn)
+ last_pfn = end_user_pfn;
+
+ printk(KERN_INFO "last_pfn = %lu max_arch_pfn = %lu\n",
+ last_pfn, max_arch_pfn);
+ return last_pfn;
+}
+
+/*
+ * Finds an active region in the address range from start_pfn to last_pfn and
+ * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
+ */
+int __init e820_find_active_region(const struct e820entry *ei,
+ unsigned long start_pfn,
+ unsigned long last_pfn,
+ unsigned long *ei_startpfn,
+ unsigned long *ei_endpfn)
+{
+ u64 align = PAGE_SIZE;
+
+ *ei_startpfn = round_up(ei->addr, align) >> PAGE_SHIFT;
+ *ei_endpfn = round_down(ei->addr + ei->size, align) >> PAGE_SHIFT;
+
+ /* Skip map entries smaller than a page */
+ if (*ei_startpfn >= *ei_endpfn)
+ return 0;
+
+ /* Skip if map is outside the node */
+ if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
+ *ei_startpfn >= last_pfn)
+ return 0;
+
+ /* Check for overlaps */
+ if (*ei_startpfn < start_pfn)
+ *ei_startpfn = start_pfn;
+ if (*ei_endpfn > last_pfn)
+ *ei_endpfn = last_pfn;
+
+ /* Obey end_user_pfn to save on memmap */
+ if (*ei_startpfn >= end_user_pfn)
+ return 0;
+ if (*ei_endpfn > end_user_pfn)
+ *ei_endpfn = end_user_pfn;
+
+ return 1;
+}
+
+/* Walk the e820 map and register active regions within a node */
+void __init e820_register_active_regions(int nid, unsigned long start_pfn,
+ unsigned long last_pfn)
+{
+ unsigned long ei_startpfn;
+ unsigned long ei_endpfn;
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++)
+ if (e820_find_active_region(&e820.map[i],
+ start_pfn, last_pfn,
+ &ei_startpfn, &ei_endpfn))
+ add_active_range(nid, ei_startpfn, ei_endpfn);
+}
+
+/*
+ * Find the hole size (in bytes) in the memory range.
+ * @start: starting address of the memory range to scan
+ * @end: ending address of the memory range to scan
+ */
+u64 __init e820_hole_size(u64 start, u64 end)
+{
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long last_pfn = end >> PAGE_SHIFT;
+ unsigned long ei_startpfn, ei_endpfn, ram = 0;
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ if (e820_find_active_region(&e820.map[i],
+ start_pfn, last_pfn,
+ &ei_startpfn, &ei_endpfn))
+ ram += ei_endpfn - ei_startpfn;
+ }
+ return end - start - ((u64)ram << PAGE_SHIFT);
+}
diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
index ed733e7cf4e6..e8a3b968c9fa 100644
--- a/arch/x86/kernel/e820_32.c
+++ b/arch/x86/kernel/e820_32.c
@@ -9,29 +9,12 @@
#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/uaccess.h>
-#include <linux/suspend.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/e820.h>
#include <asm/setup.h>
-struct e820map e820;
-struct change_member {
- struct e820entry *pbios; /* pointer to original bios entry */
- unsigned long long addr; /* address for this change point */
-};
-static struct change_member change_point_list[2*E820MAX] __initdata;
-static struct change_member *change_point[2*E820MAX] __initdata;
-static struct e820entry *overlap_list[E820MAX] __initdata;
-static struct e820entry new_bios[E820MAX] __initdata;
-/* For PCI or other memory-mapped resources */
-unsigned long pci_mem_start = 0x10000000;
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_mem_start);
-#endif
-extern int user_defined_memmap;
-
static struct resource system_rom_resource = {
.name = "System ROM",
.start = 0xf0000,
@@ -224,398 +207,12 @@ void __init init_iomem_resources(struct resource *code_resource,
}
}
-#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
-/**
- * e820_mark_nosave_regions - Find the ranges of physical addresses that do not
- * correspond to e820 RAM areas and mark the corresponding pages as nosave for
- * hibernation.
- *
- * This function requires the e820 map to be sorted and without any
- * overlapping entries and assumes the first e820 area to be RAM.
- */
-void __init e820_mark_nosave_regions(void)
-{
- int i;
- unsigned long pfn;
-
- pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size);
- for (i = 1; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
-
- if (pfn < PFN_UP(ei->addr))
- register_nosave_region(pfn, PFN_UP(ei->addr));
-
- pfn = PFN_DOWN(ei->addr + ei->size);
- if (ei->type != E820_RAM)
- register_nosave_region(PFN_UP(ei->addr), pfn);
-
- if (pfn >= max_low_pfn)
- break;
- }
-}
-#endif
-
-void __init add_memory_region(unsigned long long start,
- unsigned long long size, int type)
-{
- int x;
-
- x = e820.nr_map;
-
- if (x == E820MAX) {
- printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
- return;
- }
-
- e820.map[x].addr = start;
- e820.map[x].size = size;
- e820.map[x].type = type;
- e820.nr_map++;
-} /* add_memory_region */
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries. The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
-{
- struct change_member *change_tmp;
- unsigned long current_type, last_type;
- unsigned long long last_addr;
- int chgidx, still_changing;
- int overlap_entries;
- int new_bios_entry;
- int old_nr, new_nr, chg_nr;
- int i;
-
- /*
- Visually we're performing the following (1,2,3,4 = memory types)...
-
- Sample memory map (w/overlaps):
- ____22__________________
- ______________________4_
- ____1111________________
- _44_____________________
- 11111111________________
- ____________________33__
- ___________44___________
- __________33333_________
- ______________22________
- ___________________2222_
- _________111111111______
- _____________________11_
- _________________4______
-
- Sanitized equivalent (no overlap):
- 1_______________________
- _44_____________________
- ___1____________________
- ____22__________________
- ______11________________
- _________1______________
- __________3_____________
- ___________44___________
- _____________33_________
- _______________2________
- ________________1_______
- _________________4______
- ___________________2____
- ____________________33__
- ______________________4_
- */
- /* if there's only one memory region, don't bother */
- if (*pnr_map < 2) {
- return -1;
- }
-
- old_nr = *pnr_map;
-
- /* bail out if we find any unreasonable addresses in bios map */
- for (i=0; i<old_nr; i++)
- if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) {
- return -1;
- }
-
- /* create pointers for initial change-point information (for sorting) */
- for (i=0; i < 2*old_nr; i++)
- change_point[i] = &change_point_list[i];
-
- /* record all known change-points (starting and ending addresses),
- omitting those that are for empty memory regions */
- chgidx = 0;
- for (i=0; i < old_nr; i++) {
- if (biosmap[i].size != 0) {
- change_point[chgidx]->addr = biosmap[i].addr;
- change_point[chgidx++]->pbios = &biosmap[i];
- change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
- change_point[chgidx++]->pbios = &biosmap[i];
- }
- }
- chg_nr = chgidx; /* true number of change-points */
-
- /* sort change-point list by memory addresses (low -> high) */
- still_changing = 1;
- while (still_changing) {
- still_changing = 0;
- for (i=1; i < chg_nr; i++) {
- /* if <current_addr> > <last_addr>, swap */
- /* or, if current=<start_addr> & last=<end_addr>, swap */
- if ((change_point[i]->addr < change_point[i-1]->addr) ||
- ((change_point[i]->addr == change_point[i-1]->addr) &&
- (change_point[i]->addr == change_point[i]->pbios->addr) &&
- (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
- )
- {
- change_tmp = change_point[i];
- change_point[i] = change_point[i-1];
- change_point[i-1] = change_tmp;
- still_changing=1;
- }
- }
- }
-
- /* create a new bios memory map, removing overlaps */
- overlap_entries=0; /* number of entries in the overlap table */
- new_bios_entry=0; /* index for creating new bios map entries */
- last_type = 0; /* start with undefined memory type */
- last_addr = 0; /* start with 0 as last starting address */
- /* loop through change-points, determining affect on the new bios map */
- for (chgidx=0; chgidx < chg_nr; chgidx++)
- {
- /* keep track of all overlapping bios entries */
- if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
- {
- /* add map entry to overlap list (> 1 entry implies an overlap) */
- overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
- }
- else
- {
- /* remove entry from list (order independent, so swap with last) */
- for (i=0; i<overlap_entries; i++)
- {
- if (overlap_list[i] == change_point[chgidx]->pbios)
- overlap_list[i] = overlap_list[overlap_entries-1];
- }
- overlap_entries--;
- }
- /* if there are overlapping entries, decide which "type" to use */
- /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
- current_type = 0;
- for (i=0; i<overlap_entries; i++)
- if (overlap_list[i]->type > current_type)
- current_type = overlap_list[i]->type;
- /* continue building up new bios map based on this information */
- if (current_type != last_type) {
- if (last_type != 0) {
- new_bios[new_bios_entry].size =
- change_point[chgidx]->addr - last_addr;
- /* move forward only if the new size was non-zero */
- if (new_bios[new_bios_entry].size != 0)
- if (++new_bios_entry >= E820MAX)
- break; /* no more space left for new bios entries */
- }
- if (current_type != 0) {
- new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
- new_bios[new_bios_entry].type = current_type;
- last_addr=change_point[chgidx]->addr;
- }
- last_type = current_type;
- }
- }
- new_nr = new_bios_entry; /* retain count for new bios entries */
-
- /* copy new bios mapping into original location */
- memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
- *pnr_map = new_nr;
-
- return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory. If we aren't, we'll fake a memory map.
- *
- * We check to see that the memory map contains at least 2 elements
- * before we'll use it, because the detection code in setup.S may
- * not be perfect and most every PC known to man has two memory
- * regions: one from 0 to 640k, and one from 1mb up. (The IBM
- * thinkpad 560x, for example, does not cooperate with the memory
- * detection code.)
- */
-int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
- /* Only one memory region (or negative)? Ignore it */
- if (nr_map < 2)
- return -1;
-
- do {
- u64 start = biosmap->addr;
- u64 size = biosmap->size;
- u64 end = start + size;
- u32 type = biosmap->type;
-
- /* Overflow in 64 bits? Ignore the memory map. */
- if (start > end)
- return -1;
-
- add_memory_region(start, size, type);
- } while (biosmap++, --nr_map);
-
- return 0;
-}
-
-/*
- * Find the highest page frame number we have available
- */
-void __init propagate_e820_map(void)
-{
- int i;
-
- max_pfn = 0;
-
- for (i = 0; i < e820.nr_map; i++) {
- unsigned long start, end;
- /* RAM? */
- if (e820.map[i].type != E820_RAM)
- continue;
- start = PFN_UP(e820.map[i].addr);
- end = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
- if (start >= end)
- continue;
- if (end > max_pfn)
- max_pfn = end;
- memory_present(0, start, end);
- }
-}
-
-/*
- * Register fully available low RAM pages with the bootmem allocator.
- */
-void __init register_bootmem_low_pages(unsigned long max_low_pfn)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- unsigned long curr_pfn, last_pfn, size;
- /*
- * Reserve usable low memory
- */
- if (e820.map[i].type != E820_RAM)
- continue;
- /*
- * We are rounding up the start address of usable memory:
- */
- curr_pfn = PFN_UP(e820.map[i].addr);
- if (curr_pfn >= max_low_pfn)
- continue;
- /*
- * ... and at the end of the usable range downwards:
- */
- last_pfn = PFN_DOWN(e820.map[i].addr + e820.map[i].size);
-
- if (last_pfn > max_low_pfn)
- last_pfn = max_low_pfn;
-
- /*
- * .. finally, did all the rounding and playing
- * around just make the area go away?
- */
- if (last_pfn <= curr_pfn)
- continue;
-
- size = last_pfn - curr_pfn;
- free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
- }
-}
-
-void __init e820_register_memory(void)
-{
- unsigned long gapstart, gapsize, round;
- unsigned long long last;
- int i;
-
- /*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space.
- */
- last = 0x100000000ull;
- gapstart = 0x10000000;
- gapsize = 0x400000;
- i = e820.nr_map;
- while (--i >= 0) {
- unsigned long long start = e820.map[i].addr;
- unsigned long long end = start + e820.map[i].size;
-
- /*
- * Since "last" is at most 4GB, we know we'll
- * fit in 32 bits if this condition is true
- */
- if (last > end) {
- unsigned long gap = last - end;
-
- if (gap > gapsize) {
- gapsize = gap;
- gapstart = end;
- }
- }
- if (start < last)
- last = start;
- }
-
- /*
- * See how much we want to round up: start off with
- * rounding to the next 1MB area.
- */
- round = 0x100000;
- while ((gapsize >> 4) > round)
- round += round;
- /* Fun with two's complement */
- pci_mem_start = (gapstart + round) & -round;
-
- printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n",
- pci_mem_start, gapstart, gapsize);
-}
-
-void __init print_memory_map(char *who)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- printk(" %s: %016Lx - %016Lx ", who,
- e820.map[i].addr,
- e820.map[i].addr + e820.map[i].size);
- switch (e820.map[i].type) {
- case E820_RAM: printk("(usable)\n");
- break;
- case E820_RESERVED:
- printk("(reserved)\n");
- break;
- case E820_ACPI:
- printk("(ACPI data)\n");
- break;
- case E820_NVS:
- printk("(ACPI NVS)\n");
- break;
- default: printk("type %u\n", e820.map[i].type);
- break;
- }
- }
-}
-
void __init limit_regions(unsigned long long size)
{
unsigned long long current_addr;
int i;
- print_memory_map("limit_regions start");
+ e820_print_map("limit_regions start");
for (i = 0; i < e820.nr_map; i++) {
current_addr = e820.map[i].addr + e820.map[i].size;
if (current_addr < size)
@@ -634,63 +231,59 @@ void __init limit_regions(unsigned long long size)
e820.nr_map = i + 1;
e820.map[i].size -= current_addr - size;
}
- print_memory_map("limit_regions endfor");
+ e820_print_map("limit_regions endfor");
return;
}
- print_memory_map("limit_regions endfunc");
+ e820_print_map("limit_regions endfunc");
}
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(u64 start, u64 end, unsigned type)
+/* Overridden in paravirt.c if CONFIG_PARAVIRT */
+char * __init __attribute__((weak)) memory_setup(void)
{
- int i;
- for (i = 0; i < e820.nr_map; i++) {
- const struct e820entry *ei = &e820.map[i];
- if (type && ei->type != type)
- continue;
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
- return 1;
- }
- return 0;
+ return machine_specific_memory_setup();
}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
- /*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init
-e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
+
+void __init setup_memory_map(void)
{
- u64 start = s;
- u64 end = e;
- int i;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- if (type && ei->type != type)
- continue;
- /* is the region (part) in overlap with the current region ?*/
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
- /* if the region is at the beginning of <start,end> we move
- * start to the end of the region since it's ok until there
+ printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+ e820_print_map(memory_setup());
+}
+
+static int __initdata user_defined_memmap;
+
+/*
+ * "mem=nopentium" disables the 4MB page tables.
+ * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+ * to <mem>, overriding the bios size.
+ * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+ * <start> to <start>+<mem>, overriding the bios size.
+ *
+ * HPA tells me bootloaders need to parse mem=, so no new
+ * option should be mem= [also see Documentation/i386/boot.txt]
+ */
+static int __init parse_mem(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ if (strcmp(arg, "nopentium") == 0) {
+ setup_clear_cpu_cap(X86_FEATURE_PSE);
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
*/
- if (ei->addr <= start)
- start = ei->addr + ei->size;
- /* if start is now at or beyond end, we're done, full
- * coverage */
- if (start >= end)
- return 1; /* we're done */
+ unsigned long long mem_size;
+
+ mem_size = memparse(arg, &arg);
+ limit_regions(mem_size);
+ user_defined_memmap = 1;
}
return 0;
}
+early_param("mem", parse_mem);
static int __init parse_memmap(char *arg)
{
@@ -704,8 +297,9 @@ static int __init parse_memmap(char *arg)
* size before original memory map is
* reset.
*/
- propagate_e820_map();
- saved_max_pfn = max_pfn;
+ e820_register_active_regions(0, 0, -1UL);
+ saved_max_pfn = e820_end_of_ram();
+ remove_all_active_ranges();
#endif
e820.nr_map = 0;
user_defined_memmap = 1;
@@ -736,40 +330,12 @@ static int __init parse_memmap(char *arg)
return 0;
}
early_param("memmap", parse_memmap);
-void __init update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type)
-{
- int i;
-
- BUG_ON(old_type == new_type);
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- u64 final_start, final_end;
- if (ei->type != old_type)
- continue;
- /* totally covered? */
- if (ei->addr >= start && ei->size <= size) {
- ei->type = new_type;
- continue;
- }
- /* partially covered */
- final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
- if (final_start >= final_end)
- continue;
- add_memory_region(final_start, final_end - final_start,
- new_type);
+void __init finish_e820_parsing(void)
+{
+ if (user_defined_memmap) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ e820_print_map("user");
}
}
-void __init update_e820(void)
-{
- u8 nr_map;
- nr_map = e820.nr_map;
- if (sanitize_e820_map(e820.map, &nr_map))
- return;
- e820.nr_map = nr_map;
- printk(KERN_INFO "modified physical RAM map:\n");
- print_memory_map("modified");
-}
diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c
index 124480c0008d..0afee2ca0bf8 100644
--- a/arch/x86/kernel/e820_64.c
+++ b/arch/x86/kernel/e820_64.c
@@ -17,8 +17,8 @@
#include <linux/kexec.h>
#include <linux/module.h>
#include <linux/mm.h>
-#include <linux/suspend.h>
#include <linux/pfn.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -29,8 +29,6 @@
#include <asm/kdebug.h>
#include <asm/trampoline.h>
-struct e820map e820;
-
/*
* PFN of last memory page.
*/
@@ -44,285 +42,6 @@ unsigned long end_pfn;
unsigned long max_pfn_mapped;
/*
- * Last pfn which the user wants to use.
- */
-static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT;
-
-/*
- * Early reserved memory areas.
- */
-#define MAX_EARLY_RES 20
-
-struct early_res {
- unsigned long start, end;
- char name[16];
-};
-static struct early_res early_res[MAX_EARLY_RES] __initdata = {
- { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */
-#ifdef CONFIG_X86_TRAMPOLINE
- { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
-#endif
- {}
-};
-
-void __init reserve_early(unsigned long start, unsigned long end, char *name)
-{
- int i;
- struct early_res *r;
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- r = &early_res[i];
- if (end > r->start && start < r->end)
- panic("Overlapping early reservations %lx-%lx %s to %lx-%lx %s\n",
- start, end - 1, name?name:"", r->start, r->end - 1, r->name);
- }
- if (i >= MAX_EARLY_RES)
- panic("Too many early reservations");
- r = &early_res[i];
- r->start = start;
- r->end = end;
- if (name)
- strncpy(r->name, name, sizeof(r->name) - 1);
-}
-
-void __init free_early(unsigned long start, unsigned long end)
-{
- struct early_res *r;
- int i, j;
-
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- r = &early_res[i];
- if (start == r->start && end == r->end)
- break;
- }
- if (i >= MAX_EARLY_RES || !early_res[i].end)
- panic("free_early on not reserved area: %lx-%lx!", start, end);
-
- for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++)
- ;
-
- memmove(&early_res[i], &early_res[i + 1],
- (j - 1 - i) * sizeof(struct early_res));
-
- early_res[j - 1].end = 0;
-}
-
-void __init early_res_to_bootmem(unsigned long start, unsigned long end)
-{
- int i;
- unsigned long final_start, final_end;
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- struct early_res *r = &early_res[i];
- final_start = max(start, r->start);
- final_end = min(end, r->end);
- if (final_start >= final_end)
- continue;
- printk(KERN_INFO " early res: %d [%lx-%lx] %s\n", i,
- final_start, final_end - 1, r->name);
- reserve_bootmem_generic(final_start, final_end - final_start);
- }
-}
-
-/* Check for already reserved areas */
-static inline int __init
-bad_addr(unsigned long *addrp, unsigned long size, unsigned long align)
-{
- int i;
- unsigned long addr = *addrp, last;
- int changed = 0;
-again:
- last = addr + size;
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- struct early_res *r = &early_res[i];
- if (last >= r->start && addr < r->end) {
- *addrp = addr = round_up(r->end, align);
- changed = 1;
- goto again;
- }
- }
- return changed;
-}
-
-/* Check for already reserved areas */
-static inline int __init
-bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align)
-{
- int i;
- unsigned long addr = *addrp, last;
- unsigned long size = *sizep;
- int changed = 0;
-again:
- last = addr + size;
- for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
- struct early_res *r = &early_res[i];
- if (last > r->start && addr < r->start) {
- size = r->start - addr;
- changed = 1;
- goto again;
- }
- if (last > r->end && addr < r->end) {
- addr = round_up(r->end, align);
- size = last - addr;
- changed = 1;
- goto again;
- }
- if (last <= r->end && addr >= r->start) {
- (*sizep)++;
- return 0;
- }
- }
- if (changed) {
- *addrp = addr;
- *sizep = size;
- }
- return changed;
-}
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(unsigned long start, unsigned long end, unsigned type)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
-
- if (type && ei->type != type)
- continue;
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
- return 1;
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
-/*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
-
- if (type && ei->type != type)
- continue;
- /* is the region (part) in overlap with the current region ?*/
- if (ei->addr >= end || ei->addr + ei->size <= start)
- continue;
-
- /* if the region is at the beginning of <start,end> we move
- * start to the end of the region since it's ok until there
- */
- if (ei->addr <= start)
- start = ei->addr + ei->size;
- /*
- * if start is now at or beyond end, we're done, full
- * coverage
- */
- if (start >= end)
- return 1;
- }
- return 0;
-}
-
-/*
- * Find a free area with specified alignment in a specific range.
- */
-unsigned long __init find_e820_area(unsigned long start, unsigned long end,
- unsigned long size, unsigned long align)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- unsigned long addr, last;
- unsigned long ei_last;
-
- if (ei->type != E820_RAM)
- continue;
- addr = round_up(ei->addr, align);
- ei_last = ei->addr + ei->size;
- if (addr < start)
- addr = round_up(start, align);
- if (addr >= ei_last)
- continue;
- while (bad_addr(&addr, size, align) && addr+size <= ei_last)
- ;
- last = addr + size;
- if (last > ei_last)
- continue;
- if (last > end)
- continue;
- return addr;
- }
- return -1UL;
-}
-
-/*
- * Find next free range after *start
- */
-unsigned long __init find_e820_area_size(unsigned long start,
- unsigned long *sizep,
- unsigned long align)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- unsigned long addr, last;
- unsigned long ei_last;
-
- if (ei->type != E820_RAM)
- continue;
- addr = round_up(ei->addr, align);
- ei_last = ei->addr + ei->size;
- if (addr < start)
- addr = round_up(start, align);
- if (addr >= ei_last)
- continue;
- *sizep = ei_last - addr;
- while (bad_addr_size(&addr, sizep, align) &&
- addr + *sizep <= ei_last)
- ;
- last = addr + *sizep;
- if (last > ei_last)
- continue;
- return addr;
- }
- return -1UL;
-
-}
-/*
- * Find the highest page frame number we have available
- */
-unsigned long __init e820_end_of_ram(void)
-{
- unsigned long end_pfn;
-
- end_pfn = find_max_pfn_with_active_regions();
-
- if (end_pfn > max_pfn_mapped)
- max_pfn_mapped = end_pfn;
- if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT)
- max_pfn_mapped = MAXMEM>>PAGE_SHIFT;
- if (end_pfn > end_user_pfn)
- end_pfn = end_user_pfn;
- if (end_pfn > max_pfn_mapped)
- end_pfn = max_pfn_mapped;
-
- printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped);
- return end_pfn;
-}
-
-/*
* Mark e820 reserved areas as busy for the resource manager.
*/
void __init e820_reserve_resources(void)
@@ -346,393 +65,6 @@ void __init e820_reserve_resources(void)
}
}
-/*
- * Find the ranges of physical addresses that do not correspond to
- * e820 RAM areas and mark the corresponding pages as nosave for software
- * suspend and suspend to RAM.
- *
- * This function requires the e820 map to be sorted and without any
- * overlapping entries and assumes the first e820 area to be RAM.
- */
-void __init e820_mark_nosave_regions(void)
-{
- int i;
- unsigned long paddr;
-
- paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE);
- for (i = 1; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
-
- if (paddr < ei->addr)
- register_nosave_region(PFN_DOWN(paddr),
- PFN_UP(ei->addr));
-
- paddr = round_down(ei->addr + ei->size, PAGE_SIZE);
- if (ei->type != E820_RAM)
- register_nosave_region(PFN_UP(ei->addr),
- PFN_DOWN(paddr));
-
- if (paddr >= (end_pfn << PAGE_SHIFT))
- break;
- }
-}
-
-/*
- * Finds an active region in the address range from start_pfn to end_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
- */
-static int __init e820_find_active_region(const struct e820entry *ei,
- unsigned long start_pfn,
- unsigned long end_pfn,
- unsigned long *ei_startpfn,
- unsigned long *ei_endpfn)
-{
- *ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT;
- *ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) >> PAGE_SHIFT;
-
- /* Skip map entries smaller than a page */
- if (*ei_startpfn >= *ei_endpfn)
- return 0;
-
- /* Check if max_pfn_mapped should be updated */
- if (ei->type != E820_RAM && *ei_endpfn > max_pfn_mapped)
- max_pfn_mapped = *ei_endpfn;
-
- /* Skip if map is outside the node */
- if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
- *ei_startpfn >= end_pfn)
- return 0;
-
- /* Check for overlaps */
- if (*ei_startpfn < start_pfn)
- *ei_startpfn = start_pfn;
- if (*ei_endpfn > end_pfn)
- *ei_endpfn = end_pfn;
-
- /* Obey end_user_pfn to save on memmap */
- if (*ei_startpfn >= end_user_pfn)
- return 0;
- if (*ei_endpfn > end_user_pfn)
- *ei_endpfn = end_user_pfn;
-
- return 1;
-}
-
-/* Walk the e820 map and register active regions within a node */
-void __init
-e820_register_active_regions(int nid, unsigned long start_pfn,
- unsigned long end_pfn)
-{
- unsigned long ei_startpfn;
- unsigned long ei_endpfn;
- int i;
-
- for (i = 0; i < e820.nr_map; i++)
- if (e820_find_active_region(&e820.map[i],
- start_pfn, end_pfn,
- &ei_startpfn, &ei_endpfn))
- add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
-/*
- * Add a memory region to the kernel e820 map.
- */
-void __init add_memory_region(unsigned long start, unsigned long size, int type)
-{
- int x = e820.nr_map;
-
- if (x == E820MAX) {
- printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
- return;
- }
-
- e820.map[x].addr = start;
- e820.map[x].size = size;
- e820.map[x].type = type;
- e820.nr_map++;
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-unsigned long __init e820_hole_size(unsigned long start, unsigned long end)
-{
- unsigned long start_pfn = start >> PAGE_SHIFT;
- unsigned long end_pfn = end >> PAGE_SHIFT;
- unsigned long ei_startpfn, ei_endpfn, ram = 0;
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- if (e820_find_active_region(&e820.map[i],
- start_pfn, end_pfn,
- &ei_startpfn, &ei_endpfn))
- ram += ei_endpfn - ei_startpfn;
- }
- return end - start - (ram << PAGE_SHIFT);
-}
-
-static void __init e820_print_map(char *who)
-{
- int i;
-
- for (i = 0; i < e820.nr_map; i++) {
- printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
- (unsigned long long) e820.map[i].addr,
- (unsigned long long)
- (e820.map[i].addr + e820.map[i].size));
- switch (e820.map[i].type) {
- case E820_RAM:
- printk(KERN_CONT "(usable)\n");
- break;
- case E820_RESERVED:
- printk(KERN_CONT "(reserved)\n");
- break;
- case E820_ACPI:
- printk(KERN_CONT "(ACPI data)\n");
- break;
- case E820_NVS:
- printk(KERN_CONT "(ACPI NVS)\n");
- break;
- default:
- printk(KERN_CONT "type %u\n", e820.map[i].type);
- break;
- }
- }
-}
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries. The following
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map)
-{
- struct change_member {
- struct e820entry *pbios; /* pointer to original bios entry */
- unsigned long long addr; /* address for this change point */
- };
- static struct change_member change_point_list[2*E820MAX] __initdata;
- static struct change_member *change_point[2*E820MAX] __initdata;
- static struct e820entry *overlap_list[E820MAX] __initdata;
- static struct e820entry new_bios[E820MAX] __initdata;
- struct change_member *change_tmp;
- unsigned long current_type, last_type;
- unsigned long long last_addr;
- int chgidx, still_changing;
- int overlap_entries;
- int new_bios_entry;
- int old_nr, new_nr, chg_nr;
- int i;
-
- /*
- Visually we're performing the following
- (1,2,3,4 = memory types)...
-
- Sample memory map (w/overlaps):
- ____22__________________
- ______________________4_
- ____1111________________
- _44_____________________
- 11111111________________
- ____________________33__
- ___________44___________
- __________33333_________
- ______________22________
- ___________________2222_
- _________111111111______
- _____________________11_
- _________________4______
-
- Sanitized equivalent (no overlap):
- 1_______________________
- _44_____________________
- ___1____________________
- ____22__________________
- ______11________________
- _________1______________
- __________3_____________
- ___________44___________
- _____________33_________
- _______________2________
- ________________1_______
- _________________4______
- ___________________2____
- ____________________33__
- ______________________4_
- */
-
- /* if there's only one memory region, don't bother */
- if (*pnr_map < 2)
- return -1;
-
- old_nr = *pnr_map;
-
- /* bail out if we find any unreasonable addresses in bios map */
- for (i = 0; i < old_nr; i++)
- if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
- return -1;
-
- /* create pointers for initial change-point information (for sorting) */
- for (i = 0; i < 2 * old_nr; i++)
- change_point[i] = &change_point_list[i];
-
- /* record all known change-points (starting and ending addresses),
- omitting those that are for empty memory regions */
- chgidx = 0;
- for (i = 0; i < old_nr; i++) {
- if (biosmap[i].size != 0) {
- change_point[chgidx]->addr = biosmap[i].addr;
- change_point[chgidx++]->pbios = &biosmap[i];
- change_point[chgidx]->addr = biosmap[i].addr +
- biosmap[i].size;
- change_point[chgidx++]->pbios = &biosmap[i];
- }
- }
- chg_nr = chgidx;
-
- /* sort change-point list by memory addresses (low -> high) */
- still_changing = 1;
- while (still_changing) {
- still_changing = 0;
- for (i = 1; i < chg_nr; i++) {
- unsigned long long curaddr, lastaddr;
- unsigned long long curpbaddr, lastpbaddr;
-
- curaddr = change_point[i]->addr;
- lastaddr = change_point[i - 1]->addr;
- curpbaddr = change_point[i]->pbios->addr;
- lastpbaddr = change_point[i - 1]->pbios->addr;
-
- /*
- * swap entries, when:
- *
- * curaddr > lastaddr or
- * curaddr == lastaddr and curaddr == curpbaddr and
- * lastaddr != lastpbaddr
- */
- if (curaddr < lastaddr ||
- (curaddr == lastaddr && curaddr == curpbaddr &&
- lastaddr != lastpbaddr)) {
- change_tmp = change_point[i];
- change_point[i] = change_point[i-1];
- change_point[i-1] = change_tmp;
- still_changing = 1;
- }
- }
- }
-
- /* create a new bios memory map, removing overlaps */
- overlap_entries = 0; /* number of entries in the overlap table */
- new_bios_entry = 0; /* index for creating new bios map entries */
- last_type = 0; /* start with undefined memory type */
- last_addr = 0; /* start with 0 as last starting address */
-
- /* loop through change-points, determining affect on the new bios map */
- for (chgidx = 0; chgidx < chg_nr; chgidx++) {
- /* keep track of all overlapping bios entries */
- if (change_point[chgidx]->addr ==
- change_point[chgidx]->pbios->addr) {
- /*
- * add map entry to overlap list (> 1 entry
- * implies an overlap)
- */
- overlap_list[overlap_entries++] =
- change_point[chgidx]->pbios;
- } else {
- /*
- * remove entry from list (order independent,
- * so swap with last)
- */
- for (i = 0; i < overlap_entries; i++) {
- if (overlap_list[i] ==
- change_point[chgidx]->pbios)
- overlap_list[i] =
- overlap_list[overlap_entries-1];
- }
- overlap_entries--;
- }
- /*
- * if there are overlapping entries, decide which
- * "type" to use (larger value takes precedence --
- * 1=usable, 2,3,4,4+=unusable)
- */
- current_type = 0;
- for (i = 0; i < overlap_entries; i++)
- if (overlap_list[i]->type > current_type)
- current_type = overlap_list[i]->type;
- /*
- * continue building up new bios map based on this
- * information
- */
- if (current_type != last_type) {
- if (last_type != 0) {
- new_bios[new_bios_entry].size =
- change_point[chgidx]->addr - last_addr;
- /*
- * move forward only if the new size
- * was non-zero
- */
- if (new_bios[new_bios_entry].size != 0)
- /*
- * no more space left for new
- * bios entries ?
- */
- if (++new_bios_entry >= E820MAX)
- break;
- }
- if (current_type != 0) {
- new_bios[new_bios_entry].addr =
- change_point[chgidx]->addr;
- new_bios[new_bios_entry].type = current_type;
- last_addr = change_point[chgidx]->addr;
- }
- last_type = current_type;
- }
- }
- /* retain count for new bios entries */
- new_nr = new_bios_entry;
-
- /* copy new bios mapping into original location */
- memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry));
- *pnr_map = new_nr;
-
- return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory. If we aren't, we'll fake a memory map.
- */
-static int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
-{
- /* Only one memory region (or negative)? Ignore it */
- if (nr_map < 2)
- return -1;
-
- do {
- u64 start = biosmap->addr;
- u64 size = biosmap->size;
- u64 end = start + size;
- u32 type = biosmap->type;
-
- /* Overflow in 64 bits? Ignore the memory map. */
- if (start > end)
- return -1;
-
- add_memory_region(start, size, type);
- } while (biosmap++, --nr_map);
- return 0;
-}
-
static void early_panic(char *msg)
{
early_printk(msg);
@@ -740,16 +72,21 @@ static void early_panic(char *msg)
}
/* We're not void only for x86 32-bit compat */
-char * __init machine_specific_memory_setup(void)
+char *__init machine_specific_memory_setup(void)
{
char *who = "BIOS-e820";
+ int new_nr;
/*
* Try to copy the BIOS-supplied E820-map.
*
* Otherwise fake a memory map; one section from 0k->640k,
* the next section from 1mb->appropriate_mem_k
*/
- sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
+ new_nr = boot_params.e820_entries;
+ sanitize_e820_map(boot_params.e820_map,
+ ARRAY_SIZE(boot_params.e820_map),
+ &new_nr);
+ boot_params.e820_entries = new_nr;
if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0)
early_panic("Cannot find a valid memory map");
printk(KERN_INFO "BIOS-provided physical RAM map:\n");
@@ -787,7 +124,6 @@ static int __init parse_memmap_opt(char *p)
saved_max_pfn = e820_end_of_ram();
remove_all_active_ranges();
#endif
- max_pfn_mapped = 0;
e820.nr_map = 0;
userdef = 1;
return 0;
@@ -818,9 +154,9 @@ early_param("memmap", parse_memmap_opt);
void __init finish_e820_parsing(void)
{
if (userdef) {
- char nr = e820.nr_map;
+ int nr = e820.nr_map;
- if (sanitize_e820_map(e820.map, &nr) < 0)
+ if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0)
early_panic("Invalid user supplied memory map");
e820.nr_map = nr;
@@ -829,109 +165,6 @@ void __init finish_e820_parsing(void)
}
}
-void __init update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type)
-{
- int i;
-
- BUG_ON(old_type == new_type);
-
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
- u64 final_start, final_end;
- if (ei->type != old_type)
- continue;
- /* totally covered? */
- if (ei->addr >= start && ei->size <= size) {
- ei->type = new_type;
- continue;
- }
- /* partially covered */
- final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
- if (final_start >= final_end)
- continue;
- add_memory_region(final_start, final_end - final_start,
- new_type);
- }
-}
-
-void __init update_e820(void)
-{
- u8 nr_map;
-
- nr_map = e820.nr_map;
- if (sanitize_e820_map(e820.map, &nr_map))
- return;
- e820.nr_map = nr_map;
- printk(KERN_INFO "modified physical RAM map:\n");
- e820_print_map("modified");
-}
-
-unsigned long pci_mem_start = 0xaeedbabe;
-EXPORT_SYMBOL(pci_mem_start);
-
-/*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space. We pass this space to PCI to assign MMIO resources
- * for hotplug or unconfigured devices in.
- * Hopefully the BIOS let enough space left.
- */
-__init void e820_setup_gap(void)
-{
- unsigned long gapstart, gapsize, round;
- unsigned long last;
- int i;
- int found = 0;
-
- last = 0x100000000ull;
- gapstart = 0x10000000;
- gapsize = 0x400000;
- i = e820.nr_map;
- while (--i >= 0) {
- unsigned long long start = e820.map[i].addr;
- unsigned long long end = start + e820.map[i].size;
-
- /*
- * Since "last" is at most 4GB, we know we'll
- * fit in 32 bits if this condition is true
- */
- if (last > end) {
- unsigned long gap = last - end;
-
- if (gap > gapsize) {
- gapsize = gap;
- gapstart = end;
- found = 1;
- }
- }
- if (start < last)
- last = start;
- }
-
- if (!found) {
- gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
- "address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource "
- "registers may break!\n");
- }
-
- /*
- * See how much we want to round up: start off with
- * rounding to the next 1MB area.
- */
- round = 0x100000;
- while ((gapsize >> 4) > round)
- round += round;
- /* Fun with two's complement */
- pci_mem_start = (gapstart + round) & -round;
-
- printk(KERN_INFO
- "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
- pci_mem_start, gapstart, gapsize);
-}
-
int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
{
int i;
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 77d424cf68b3..d5c7fcdd1861 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -213,6 +213,48 @@ unsigned long efi_get_time(void)
eft.minute, eft.second);
}
+/*
+ * Tell the kernel about the EFI memory map. This might include
+ * more than the max 128 entries that can fit in the e820 legacy
+ * (zeropage) memory map.
+ */
+
+static void __init add_efi_memmap(void)
+{
+ void *p;
+
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+ efi_memory_desc_t *md = p;
+ unsigned long long start = md->phys_addr;
+ unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
+ int e820_type;
+
+ if (md->attribute & EFI_MEMORY_WB)
+ e820_type = E820_RAM;
+ else
+ e820_type = E820_RESERVED;
+ add_memory_region(start, size, e820_type);
+ }
+ sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+}
+
+void __init efi_reserve_early(void)
+{
+ unsigned long pmap;
+
+ pmap = boot_params.efi_info.efi_memmap;
+#ifdef CONFIG_X86_64
+ pmap += (__u64)boot_params.efi_info.efi_memmap_hi << 32;
+#endif
+ memmap.phys_map = (void *)pmap;
+ memmap.nr_map = boot_params.efi_info.efi_memmap_size /
+ boot_params.efi_info.efi_memdesc_size;
+ memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
+ memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
+ reserve_early(pmap, pmap + memmap.nr_map * memmap.desc_size,
+ "EFI memmap");
+}
+
#if EFI_DEBUG
static void __init print_efi_memmap(void)
{
@@ -242,21 +284,11 @@ void __init efi_init(void)
int i = 0;
void *tmp;
-#ifdef CONFIG_X86_32
efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
- memmap.phys_map = (void *)boot_params.efi_info.efi_memmap;
-#else
- efi_phys.systab = (efi_system_table_t *)
- (boot_params.efi_info.efi_systab |
- ((__u64)boot_params.efi_info.efi_systab_hi<<32));
- memmap.phys_map = (void *)
- (boot_params.efi_info.efi_memmap |
- ((__u64)boot_params.efi_info.efi_memmap_hi<<32));
+#ifdef CONFIG_X86_64
+ efi_phys.systab = (void *)efi_phys.systab +
+ ((__u64)boot_params.efi_info.efi_systab_hi<<32);
#endif
- memmap.nr_map = boot_params.efi_info.efi_memmap_size /
- boot_params.efi_info.efi_memdesc_size;
- memmap.desc_version = boot_params.efi_info.efi_memdesc_version;
- memmap.desc_size = boot_params.efi_info.efi_memdesc_size;
efi.systab = early_ioremap((unsigned long)efi_phys.systab,
sizeof(efi_system_table_t));
@@ -370,6 +402,7 @@ void __init efi_init(void)
if (memmap.desc_size != sizeof(efi_memory_desc_t))
printk(KERN_WARNING "Kernel-defined memdesc"
"doesn't match the one from EFI!\n");
+ add_efi_memmap();
/* Setup for EFI runtime service */
reboot_type = BOOT_EFI;
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index d0060fdcccac..652c5287215f 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -97,13 +97,7 @@ void __init efi_call_phys_epilog(void)
early_runtime_code_mapping_set_exec(0);
}
-void __init efi_reserve_bootmem(void)
-{
- reserve_bootmem_generic((unsigned long)memmap.phys_map,
- memmap.nr_map * memmap.desc_size);
-}
-
-void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
{
static unsigned pages_mapped __initdata;
unsigned i, pages;
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index cbaaf69bedb2..1fa8be5bd217 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -51,7 +51,7 @@ void __init setup_apic_routing(void)
else
#endif
- if (num_possible_cpus() <= 8)
+ if (max_physical_apicid < 8)
genapic = &apic_flat;
else
genapic = &apic_physflat;
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
new file mode 100644
index 000000000000..a727c0b9819c
--- /dev/null
+++ b/arch/x86/kernel/head.c
@@ -0,0 +1,73 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/bios_ebda.h>
+
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
+/*
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
+ */
+void __init reserve_ebda_region(void)
+{
+ unsigned int lowmem, ebda_addr;
+
+ /* To determine the position of the EBDA and the */
+ /* end of conventional memory, we need to look at */
+ /* the BIOS data area. In a paravirtual environment */
+ /* that area is absent. We'll just have to assume */
+ /* that the paravirt case can handle memory setup */
+ /* correctly, without our help. */
+ if (paravirt_enabled())
+ return;
+
+ /* end of low (conventional) memory */
+ lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+ lowmem <<= 10;
+
+ /* start of EBDA area */
+ ebda_addr = get_bios_ebda();
+
+ /* Fixup: bios puts an EBDA in the top 64K segment */
+ /* of conventional memory, but does not adjust lowmem. */
+ if ((lowmem - ebda_addr) <= 0x10000)
+ lowmem = ebda_addr;
+
+ /* Fixup: bios does not report an EBDA at all. */
+ /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+ if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+ lowmem = 0x9f000;
+
+ /* Paranoia: should never happen, but... */
+ if ((lowmem == 0) || (lowmem >= 0x100000))
+ lowmem = 0x9f000;
+
+ /* reserve all memory between lowmem and the 1MB mark */
+ reserve_early(lowmem, 0x100000, "BIOS reserved");
+}
+
+void __init reserve_setup_data(void)
+{
+ struct setup_data *data;
+ u64 pa_data;
+ char buf[32];
+
+ if (boot_params.hdr.version < 0x0209)
+ return;
+ pa_data = boot_params.hdr.setup_data;
+ while (pa_data) {
+ data = early_ioremap(pa_data, sizeof(*data));
+ sprintf(buf, "setup data %x", data->type);
+ reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
+ pa_data = data->next;
+ early_iounmap(data, sizeof(*data));
+ }
+}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3db059058927..fa1d25dd83e3 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -8,7 +8,34 @@
#include <linux/init.h>
#include <linux/start_kernel.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/e820.h>
+#include <asm/bios_ebda.h>
+
void __init i386_start_kernel(void)
{
+ reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* Reserve INITRD */
+ if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+ u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+ u64 ramdisk_size = boot_params.hdr.ramdisk_size;
+ u64 ramdisk_end = ramdisk_image + ramdisk_size;
+ reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
+ }
+#endif
+ reserve_early(init_pg_tables_start, init_pg_tables_end,
+ "INIT_PG_TABLE");
+
+ reserve_ebda_region();
+
+ /*
+ * At this point everything still needed from the boot loader
+ * or BIOS or kernel text should be early reserved or marked not
+ * RAM in e820. All other memory is free game.
+ */
+
start_kernel();
}
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index e25c57b8aa84..5fbed459ff3b 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -51,74 +51,6 @@ static void __init copy_bootdata(char *real_mode_data)
}
}
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
- unsigned int lowmem, ebda_addr;
-
- /* To determine the position of the EBDA and the */
- /* end of conventional memory, we need to look at */
- /* the BIOS data area. In a paravirtual environment */
- /* that area is absent. We'll just have to assume */
- /* that the paravirt case can handle memory setup */
- /* correctly, without our help. */
- if (paravirt_enabled())
- return;
-
- /* end of low (conventional) memory */
- lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
- lowmem <<= 10;
-
- /* start of EBDA area */
- ebda_addr = get_bios_ebda();
-
- /* Fixup: bios puts an EBDA in the top 64K segment */
- /* of conventional memory, but does not adjust lowmem. */
- if ((lowmem - ebda_addr) <= 0x10000)
- lowmem = ebda_addr;
-
- /* Fixup: bios does not report an EBDA at all. */
- /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
- if ((ebda_addr == 0) && (lowmem >= 0x9f000))
- lowmem = 0x9f000;
-
- /* Paranoia: should never happen, but... */
- if ((lowmem == 0) || (lowmem >= 0x100000))
- lowmem = 0x9f000;
-
- /* reserve all memory between lowmem and the 1MB mark */
- reserve_early(lowmem, 0x100000, "BIOS reserved");
-}
-
-static void __init reserve_setup_data(void)
-{
- struct setup_data *data;
- unsigned long pa_data;
- char buf[32];
-
- if (boot_params.hdr.version < 0x0209)
- return;
- pa_data = boot_params.hdr.setup_data;
- while (pa_data) {
- data = early_ioremap(pa_data, sizeof(*data));
- sprintf(buf, "setup data %x", data->type);
- reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf);
- pa_data = data->next;
- early_iounmap(data, sizeof(*data));
- }
-}
-
void __init x86_64_start_kernel(char * real_mode_data)
{
int i;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f7357cc0162c..b98b338aae1a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -194,6 +194,7 @@ default_entry:
xorl %ebx,%ebx /* %ebx is kept at zero */
movl $pa(pg0), %edi
+ movl %edi, pa(init_pg_tables_start)
movl $pa(swapper_pg_pmd), %edx
movl $PTE_ATTR, %eax
10:
@@ -219,6 +220,8 @@ default_entry:
jb 10b
1:
movl %edi,pa(init_pg_tables_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
/* Do early initialization of the fixmap area */
movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
@@ -228,6 +231,7 @@ default_entry:
page_pde_offset = (__PAGE_OFFSET >> 20);
movl $pa(pg0), %edi
+ movl %edi, pa(init_pg_tables_start)
movl $pa(swapper_pg_dir), %edx
movl $PTE_ATTR, %eax
10:
@@ -249,6 +253,8 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
cmpl %ebp,%eax
jb 10b
movl %edi,pa(init_pg_tables_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
/* Do early initialization of the fixmap area */
movl $pa(swapper_pg_fixmap)+PDE_ATTR,%eax
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 4dc8600d9d20..0662817d61bf 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -72,15 +72,21 @@ int sis_apic_bug = -1;
int nr_ioapic_registers[MAX_IO_APICS];
/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
/* MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* # of MP IRQ source entries */
int mp_irq_entries;
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
static int disable_timer_pin_1 __initdata;
/*
@@ -110,7 +116,7 @@ struct io_apic {
static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
{
return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
- + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+ + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
}
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
@@ -801,10 +807,10 @@ static int find_irq_entry(int apic, int pin, int type)
int i;
for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_irqtype == type &&
- (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
- mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
- mp_irqs[i].mpc_dstirq == pin)
+ if (mp_irqs[i].mp_irqtype == type &&
+ (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+ mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+ mp_irqs[i].mp_dstirq == pin)
return i;
return -1;
@@ -818,13 +824,13 @@ static int __init find_isa_irq_pin(int irq, int type)
int i;
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].mpc_irqtype == type) &&
- (mp_irqs[i].mpc_srcbusirq == irq))
+ (mp_irqs[i].mp_irqtype == type) &&
+ (mp_irqs[i].mp_srcbusirq == irq))
- return mp_irqs[i].mpc_dstirq;
+ return mp_irqs[i].mp_dstirq;
}
return -1;
}
@@ -834,17 +840,17 @@ static int __init find_isa_irq_apic(int irq, int type)
int i;
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].mpc_irqtype == type) &&
- (mp_irqs[i].mpc_srcbusirq == irq))
+ (mp_irqs[i].mp_irqtype == type) &&
+ (mp_irqs[i].mp_srcbusirq == irq))
break;
}
if (i < mp_irq_entries) {
int apic;
for(apic = 0; apic < nr_ioapics; apic++) {
- if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+ if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
return apic;
}
}
@@ -864,28 +870,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, "
"slot:%d, pin:%d.\n", bus, slot, pin);
- if (mp_bus_id_to_pci_bus[bus] == -1) {
+ if (test_bit(bus, mp_bus_not_pci)) {
printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
return -1;
}
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
- mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+ if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+ mp_irqs[i].mp_dstapic == MP_APIC_ALL)
break;
if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].mpc_irqtype &&
+ !mp_irqs[i].mp_irqtype &&
(bus == lbus) &&
- (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+ (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
if (!(apic || IO_APIC_IRQ(irq)))
continue;
- if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+ if (pin == (mp_irqs[i].mp_srcbusirq & 3))
return irq;
/*
* Use the first all-but-pin matching entry as a
@@ -952,7 +958,7 @@ static int EISA_ELCR(unsigned int irq)
* EISA conforming in the MP table, that means its trigger type must
* be read in from the ELCR */
-#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
+#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq))
#define default_EISA_polarity(idx) default_ISA_polarity(idx)
/* PCI interrupts are always polarity one level triggered,
@@ -969,13 +975,13 @@ static int EISA_ELCR(unsigned int irq)
static int MPBIOS_polarity(int idx)
{
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
int polarity;
/*
* Determine IRQ line polarity (high active or low active):
*/
- switch (mp_irqs[idx].mpc_irqflag & 3)
+ switch (mp_irqs[idx].mp_irqflag & 3)
{
case 0: /* conforms, ie. bus-type dependent polarity */
{
@@ -1012,13 +1018,13 @@ static int MPBIOS_polarity(int idx)
static int MPBIOS_trigger(int idx)
{
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
int trigger;
/*
* Determine IRQ trigger mode (edge or level sensitive):
*/
- switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+ switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
{
case 0: /* conforms, ie. bus-type dependent */
{
@@ -1097,16 +1103,16 @@ static inline int irq_trigger(int idx)
static int pin_2_irq(int idx, int apic, int pin)
{
int irq, i;
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
/*
* Debugging check, we are in big trouble if this message pops up!
*/
- if (mp_irqs[idx].mpc_dstirq != pin)
+ if (mp_irqs[idx].mp_dstirq != pin)
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
if (test_bit(bus, mp_bus_not_pci))
- irq = mp_irqs[idx].mpc_srcbusirq;
+ irq = mp_irqs[idx].mp_srcbusirq;
else {
/*
* PCI IRQs are mapped in order
@@ -1250,12 +1256,12 @@ static void __init setup_IO_APIC_irqs(void)
if (first_notcon) {
apic_printk(APIC_VERBOSE, KERN_DEBUG
" IO-APIC (apicid-pin) %d-%d",
- mp_ioapics[apic].mpc_apicid,
+ mp_ioapics[apic].mp_apicid,
pin);
first_notcon = 0;
} else
apic_printk(APIC_VERBOSE, ", %d-%d",
- mp_ioapics[apic].mpc_apicid, pin);
+ mp_ioapics[apic].mp_apicid, pin);
continue;
}
@@ -1357,7 +1363,7 @@ void __init print_IO_APIC(void)
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
for (i = 0; i < nr_ioapics; i++)
printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
- mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+ mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
/*
* We are a bit conservative about what we expect. We have to
@@ -1376,7 +1382,7 @@ void __init print_IO_APIC(void)
reg_03.raw = io_apic_read(apic, 3);
spin_unlock_irqrestore(&ioapic_lock, flags);
- printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+ printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type);
@@ -1716,7 +1722,6 @@ void disable_IO_APIC(void)
* by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
*/
-#ifndef CONFIG_X86_NUMAQ
static void __init setup_ioapic_ids_from_mpc(void)
{
union IO_APIC_reg_00 reg_00;
@@ -1726,6 +1731,11 @@ static void __init setup_ioapic_ids_from_mpc(void)
unsigned char old_id;
unsigned long flags;
+#ifdef CONFIG_X86_NUMAQ
+ if (found_numaq)
+ return;
+#endif
+
/*
* Don't check I/O APIC IDs for xAPIC systems. They have
* no meaning without the serial APIC bus.
@@ -1749,14 +1759,14 @@ static void __init setup_ioapic_ids_from_mpc(void)
reg_00.raw = io_apic_read(apic, 0);
spin_unlock_irqrestore(&ioapic_lock, flags);
- old_id = mp_ioapics[apic].mpc_apicid;
+ old_id = mp_ioapics[apic].mp_apicid;
- if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
+ if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) {
printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
- apic, mp_ioapics[apic].mpc_apicid);
+ apic, mp_ioapics[apic].mp_apicid);
printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
reg_00.bits.ID);
- mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
+ mp_ioapics[apic].mp_apicid = reg_00.bits.ID;
}
/*
@@ -1765,9 +1775,9 @@ static void __init setup_ioapic_ids_from_mpc(void)
* 'stuck on smp_invalidate_needed IPI wait' messages.
*/
if (check_apicid_used(phys_id_present_map,
- mp_ioapics[apic].mpc_apicid)) {
+ mp_ioapics[apic].mp_apicid)) {
printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
- apic, mp_ioapics[apic].mpc_apicid);
+ apic, mp_ioapics[apic].mp_apicid);
for (i = 0; i < get_physical_broadcast(); i++)
if (!physid_isset(i, phys_id_present_map))
break;
@@ -1776,13 +1786,13 @@ static void __init setup_ioapic_ids_from_mpc(void)
printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
i);
physid_set(i, phys_id_present_map);
- mp_ioapics[apic].mpc_apicid = i;
+ mp_ioapics[apic].mp_apicid = i;
} else {
physid_mask_t tmp;
- tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid);
+ tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid);
apic_printk(APIC_VERBOSE, "Setting %d in the "
"phys_id_present_map\n",
- mp_ioapics[apic].mpc_apicid);
+ mp_ioapics[apic].mp_apicid);
physids_or(phys_id_present_map, phys_id_present_map, tmp);
}
@@ -1791,11 +1801,11 @@ static void __init setup_ioapic_ids_from_mpc(void)
* We need to adjust the IRQ routing table
* if the ID changed.
*/
- if (old_id != mp_ioapics[apic].mpc_apicid)
+ if (old_id != mp_ioapics[apic].mp_apicid)
for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_dstapic == old_id)
- mp_irqs[i].mpc_dstapic
- = mp_ioapics[apic].mpc_apicid;
+ if (mp_irqs[i].mp_dstapic == old_id)
+ mp_irqs[i].mp_dstapic
+ = mp_ioapics[apic].mp_apicid;
/*
* Read the right value from the MPC table and
@@ -1803,9 +1813,9 @@ static void __init setup_ioapic_ids_from_mpc(void)
*/
apic_printk(APIC_VERBOSE, KERN_INFO
"...changing IO-APIC physical APIC ID to %d ...",
- mp_ioapics[apic].mpc_apicid);
+ mp_ioapics[apic].mp_apicid);
- reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
+ reg_00.bits.ID = mp_ioapics[apic].mp_apicid;
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0, reg_00.raw);
spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -1816,15 +1826,12 @@ static void __init setup_ioapic_ids_from_mpc(void)
spin_lock_irqsave(&ioapic_lock, flags);
reg_00.raw = io_apic_read(apic, 0);
spin_unlock_irqrestore(&ioapic_lock, flags);
- if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
+ if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid)
printk("could not set ID!\n");
else
apic_printk(APIC_VERBOSE, " ok.\n");
}
}
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
int no_timer_check __initdata;
@@ -2347,8 +2354,8 @@ static int ioapic_resume(struct sys_device *dev)
spin_lock_irqsave(&ioapic_lock, flags);
reg_00.raw = io_apic_read(dev->id, 0);
- if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
- reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+ if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+ reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
io_apic_write(dev->id, 0, reg_00.raw);
}
spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -2781,7 +2788,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry "
"(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic,
- mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
+ mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq,
edge_level, active_high_low);
ioapic_register_intr(irq, entry.vector, edge_level);
@@ -2802,8 +2809,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
return -1;
for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_irqtype == mp_INT &&
- mp_irqs[i].mpc_srcbusirq == bus_irq)
+ if (mp_irqs[i].mp_irqtype == mp_INT &&
+ mp_irqs[i].mp_srcbusirq == bus_irq)
break;
if (i >= mp_irq_entries)
return -1;
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index ef1a8dfcc529..339cf6f926dc 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -104,15 +104,17 @@ DEFINE_SPINLOCK(vector_lock);
int nr_ioapic_registers[MAX_IO_APICS];
/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
int nr_ioapics;
/* MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* # of MP IRQ source entries */
int mp_irq_entries;
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
/*
* Rough estimation of how many shared IRQs there are, can
* be changed anytime.
@@ -140,7 +142,7 @@ struct io_apic {
static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
{
return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
- + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+ + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK);
}
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
@@ -453,10 +455,10 @@ static int find_irq_entry(int apic, int pin, int type)
int i;
for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_irqtype == type &&
- (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
- mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
- mp_irqs[i].mpc_dstirq == pin)
+ if (mp_irqs[i].mp_irqtype == type &&
+ (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid ||
+ mp_irqs[i].mp_dstapic == MP_APIC_ALL) &&
+ mp_irqs[i].mp_dstirq == pin)
return i;
return -1;
@@ -470,13 +472,13 @@ static int __init find_isa_irq_pin(int irq, int type)
int i;
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].mpc_irqtype == type) &&
- (mp_irqs[i].mpc_srcbusirq == irq))
+ (mp_irqs[i].mp_irqtype == type) &&
+ (mp_irqs[i].mp_srcbusirq == irq))
- return mp_irqs[i].mpc_dstirq;
+ return mp_irqs[i].mp_dstirq;
}
return -1;
}
@@ -486,17 +488,17 @@ static int __init find_isa_irq_apic(int irq, int type)
int i;
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
if (test_bit(lbus, mp_bus_not_pci) &&
- (mp_irqs[i].mpc_irqtype == type) &&
- (mp_irqs[i].mpc_srcbusirq == irq))
+ (mp_irqs[i].mp_irqtype == type) &&
+ (mp_irqs[i].mp_srcbusirq == irq))
break;
}
if (i < mp_irq_entries) {
int apic;
for(apic = 0; apic < nr_ioapics; apic++) {
- if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+ if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic)
return apic;
}
}
@@ -516,28 +518,28 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
bus, slot, pin);
- if (mp_bus_id_to_pci_bus[bus] == -1) {
+ if (test_bit(bus, mp_bus_not_pci)) {
apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
return -1;
}
for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].mpc_srcbus;
+ int lbus = mp_irqs[i].mp_srcbus;
for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
- mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
+ if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic ||
+ mp_irqs[i].mp_dstapic == MP_APIC_ALL)
break;
if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].mpc_irqtype &&
+ !mp_irqs[i].mp_irqtype &&
(bus == lbus) &&
- (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
+ (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq);
if (!(apic || IO_APIC_IRQ(irq)))
continue;
- if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
+ if (pin == (mp_irqs[i].mp_srcbusirq & 3))
return irq;
/*
* Use the first all-but-pin matching entry as a
@@ -565,13 +567,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
static int MPBIOS_polarity(int idx)
{
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
int polarity;
/*
* Determine IRQ line polarity (high active or low active):
*/
- switch (mp_irqs[idx].mpc_irqflag & 3)
+ switch (mp_irqs[idx].mp_irqflag & 3)
{
case 0: /* conforms, ie. bus-type dependent polarity */
if (test_bit(bus, mp_bus_not_pci))
@@ -607,13 +609,13 @@ static int MPBIOS_polarity(int idx)
static int MPBIOS_trigger(int idx)
{
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
int trigger;
/*
* Determine IRQ trigger mode (edge or level sensitive):
*/
- switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
+ switch ((mp_irqs[idx].mp_irqflag>>2) & 3)
{
case 0: /* conforms, ie. bus-type dependent */
if (test_bit(bus, mp_bus_not_pci))
@@ -660,16 +662,16 @@ static inline int irq_trigger(int idx)
static int pin_2_irq(int idx, int apic, int pin)
{
int irq, i;
- int bus = mp_irqs[idx].mpc_srcbus;
+ int bus = mp_irqs[idx].mp_srcbus;
/*
* Debugging check, we are in big trouble if this message pops up!
*/
- if (mp_irqs[idx].mpc_dstirq != pin)
+ if (mp_irqs[idx].mp_dstirq != pin)
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
if (test_bit(bus, mp_bus_not_pci)) {
- irq = mp_irqs[idx].mpc_srcbusirq;
+ irq = mp_irqs[idx].mp_srcbusirq;
} else {
/*
* PCI IRQs are mapped in order
@@ -846,7 +848,7 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
apic_printk(APIC_VERBOSE,KERN_DEBUG
"IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n",
- apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector,
+ apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector,
irq, trigger, polarity);
/*
@@ -887,10 +889,10 @@ static void __init setup_IO_APIC_irqs(void)
idx = find_irq_entry(apic,pin,mp_INT);
if (idx == -1) {
if (first_notcon) {
- apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+ apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin);
first_notcon = 0;
} else
- apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
+ apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin);
continue;
}
if (!first_notcon) {
@@ -965,7 +967,7 @@ void __apicdebuginit print_IO_APIC(void)
printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
for (i = 0; i < nr_ioapics; i++)
printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
- mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
+ mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]);
/*
* We are a bit conservative about what we expect. We have to
@@ -983,7 +985,7 @@ void __apicdebuginit print_IO_APIC(void)
spin_unlock_irqrestore(&ioapic_lock, flags);
printk("\n");
- printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
+ printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid);
printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
@@ -1841,8 +1843,8 @@ static int ioapic_resume(struct sys_device *dev)
spin_lock_irqsave(&ioapic_lock, flags);
reg_00.raw = io_apic_read(dev->id, 0);
- if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
- reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
+ if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) {
+ reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid;
io_apic_write(dev->id, 0, reg_00.raw);
}
spin_unlock_irqrestore(&ioapic_lock, flags);
@@ -2242,8 +2244,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
return -1;
for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_irqtype == mp_INT &&
- mp_irqs[i].mpc_srcbusirq == bus_irq)
+ if (mp_irqs[i].mp_irqtype == mp_INT &&
+ mp_irqs[i].mp_srcbusirq == bus_irq)
break;
if (i >= mp_irq_entries)
return -1;
@@ -2336,7 +2338,7 @@ void __init ioapic_init_mappings(void)
ioapic_res = ioapic_setup_resources();
for (i = 0; i < nr_ioapics; i++) {
if (smp_found_config) {
- ioapic_phys = mp_ioapics[i].mpc_apicaddr;
+ ioapic_phys = mp_ioapics[i].mp_apicaddr;
} else {
ioapic_phys = (unsigned long)
alloc_bootmem_pages(PAGE_SIZE);
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 404683b94e79..1cc7a4b8643f 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -25,6 +25,8 @@
#include <asm/proto.h>
#include <asm/acpi.h>
#include <asm/bios_ebda.h>
+#include <asm/e820.h>
+#include <asm/trampoline.h>
#include <mach_apic.h>
#ifdef CONFIG_X86_32
@@ -32,28 +34,6 @@
#include <mach_mpparse.h>
#endif
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-int mp_bus_id_to_type[MAX_MP_BUSSES];
-#endif
-
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
-
-static int mp_current_pci_id;
-
-int pic_mode;
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
/*
* Checksum an MP configuration block.
*/
@@ -69,15 +49,73 @@ static int __init mpf_checksum(unsigned char *mp, int len)
}
#ifdef CONFIG_X86_NUMAQ
+int found_numaq;
/*
* Have to match translation table entries to main table entries by counter
* hence the mpc_record variable .... can't see a less disgusting way of
* doing this ....
*/
+struct mpc_config_translation {
+ unsigned char mpc_type;
+ unsigned char trans_len;
+ unsigned char trans_type;
+ unsigned char trans_quad;
+ unsigned char trans_global;
+ unsigned char trans_local;
+ unsigned short trans_reserved;
+};
+
static int mpc_record;
static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
__cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+ return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+
+static inline int mpc_apic_id(struct mpc_config_processor *m,
+ struct mpc_config_translation *translation_record)
+{
+ int quad = translation_record->trans_quad;
+ int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+ printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+ m->mpc_apicid,
+ (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+ m->mpc_apicver, quad, logical_apicid);
+ return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ mp_bus_id_to_node[m->mpc_busid] = quad;
+ mp_bus_id_to_local[m->mpc_busid] = local;
+ printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+ m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+static void mpc_oem_pci_bus(struct mpc_config_bus *m,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
#endif
static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
@@ -90,7 +128,10 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
return;
}
#ifdef CONFIG_X86_NUMAQ
- apicid = mpc_apic_id(m, translation_table[mpc_record]);
+ if (found_numaq)
+ apicid = mpc_apic_id(m, translation_table[mpc_record]);
+ else
+ apicid = m->mpc_apicid;
#else
apicid = m->mpc_apicid;
#endif
@@ -103,17 +144,18 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
generic_processor_info(apicid, m->mpc_apicver);
}
+#ifdef CONFIG_X86_IO_APIC
static void __init MP_bus_info(struct mpc_config_bus *m)
{
char str[7];
-
memcpy(str, m->mpc_bustype, 6);
str[6] = 0;
#ifdef CONFIG_X86_NUMAQ
- mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+ if (found_numaq)
+ mpc_oem_bus_info(m, str, translation_table[mpc_record]);
#else
- Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
+ printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
#endif
#if MAX_MP_BUSSES < 256
@@ -132,11 +174,10 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
#endif
} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
#ifdef CONFIG_X86_NUMAQ
- mpc_oem_pci_bus(m, translation_table[mpc_record]);
+ if (found_numaq)
+ mpc_oem_pci_bus(m, translation_table[mpc_record]);
#endif
clear_bit(m->mpc_busid, mp_bus_not_pci);
- mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
- mp_current_pci_id++;
#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
@@ -147,6 +188,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
} else
printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
}
+#endif
#ifdef CONFIG_X86_IO_APIC
@@ -176,18 +218,89 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
if (bad_ioapic(m->mpc_apicaddr))
return;
- mp_ioapics[nr_ioapics] = *m;
+ mp_ioapics[nr_ioapics].mp_apicaddr = m->mpc_apicaddr;
+ mp_ioapics[nr_ioapics].mp_apicid = m->mpc_apicid;
+ mp_ioapics[nr_ioapics].mp_type = m->mpc_type;
+ mp_ioapics[nr_ioapics].mp_apicver = m->mpc_apicver;
+ mp_ioapics[nr_ioapics].mp_flags = m->mpc_flags;
nr_ioapics++;
}
-static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
+static void print_MP_intsrc_info(struct mpc_config_intsrc *m)
{
- mp_irqs[mp_irq_entries] = *m;
- Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+ printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
" IRQ %02x, APIC ID %x, APIC INT %02x\n",
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+}
+
+static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq)
+{
+ printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x,"
+ " IRQ %02x, APIC ID %x, APIC INT %02x\n",
+ mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3,
+ (mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus,
+ mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq);
+}
+
+static void assign_to_mp_irq(struct mpc_config_intsrc *m,
+ struct mp_config_intsrc *mp_irq)
+{
+ mp_irq->mp_dstapic = m->mpc_dstapic;
+ mp_irq->mp_type = m->mpc_type;
+ mp_irq->mp_irqtype = m->mpc_irqtype;
+ mp_irq->mp_irqflag = m->mpc_irqflag;
+ mp_irq->mp_srcbus = m->mpc_srcbus;
+ mp_irq->mp_srcbusirq = m->mpc_srcbusirq;
+ mp_irq->mp_dstirq = m->mpc_dstirq;
+}
+
+static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq,
+ struct mpc_config_intsrc *m)
+{
+ m->mpc_dstapic = mp_irq->mp_dstapic;
+ m->mpc_type = mp_irq->mp_type;
+ m->mpc_irqtype = mp_irq->mp_irqtype;
+ m->mpc_irqflag = mp_irq->mp_irqflag;
+ m->mpc_srcbus = mp_irq->mp_srcbus;
+ m->mpc_srcbusirq = mp_irq->mp_srcbusirq;
+ m->mpc_dstirq = mp_irq->mp_dstirq;
+}
+
+static int mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq,
+ struct mpc_config_intsrc *m)
+{
+ if (mp_irq->mp_dstapic != m->mpc_dstapic)
+ return 1;
+ if (mp_irq->mp_type != m->mpc_type)
+ return 2;
+ if (mp_irq->mp_irqtype != m->mpc_irqtype)
+ return 3;
+ if (mp_irq->mp_irqflag != m->mpc_irqflag)
+ return 4;
+ if (mp_irq->mp_srcbus != m->mpc_srcbus)
+ return 5;
+ if (mp_irq->mp_srcbusirq != m->mpc_srcbusirq)
+ return 6;
+ if (mp_irq->mp_dstirq != m->mpc_dstirq)
+ return 7;
+
+ return 0;
+}
+
+void MP_intsrc_info(struct mpc_config_intsrc *m)
+{
+ int i;
+
+ print_MP_intsrc_info(m);
+
+ for (i = 0; i < mp_irq_entries; i++) {
+ if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m))
+ return;
+ }
+
+ assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!!\n");
}
@@ -196,7 +309,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
{
- Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
+ printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x,"
" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
@@ -266,11 +379,14 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
}
}
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
{
if (strncmp(oem, "IBM NUMA", 8))
- printk("Warning! May not be a NUMA-Q system!\n");
+ printk("Warning! Not a NUMA-Q system!\n");
+ else
+ found_numaq = 1;
+
if (mpc->mpc_oemptr)
smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
mpc->mpc_oemsize);
@@ -281,12 +397,9 @@ static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
* Read/parse the MPC
*/
-static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
+static int __init smp_check_mpc(struct mp_config_table *mpc, char *oem,
+ char *str)
{
- char str[16];
- char oem[10];
- int count = sizeof(*mpc);
- unsigned char *mpt = ((unsigned char *)mpc) + count;
if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
@@ -309,19 +422,42 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
}
memcpy(oem, mpc->mpc_oem, 8);
oem[8] = 0;
- printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem);
+ printk(KERN_INFO "MPTABLE: OEM ID: %s\n", oem);
memcpy(str, mpc->mpc_productid, 12);
str[12] = 0;
- printk("Product ID: %s ", str);
-#ifdef CONFIG_X86_32
- mps_oem_check(mpc, oem, str);
-#endif
- printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
+ printk(KERN_INFO "MPTABLE: Product ID: %s\n", str);
printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
+ return 1;
+}
+
+static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
+{
+ char str[16];
+ char oem[10];
+
+ int count = sizeof(*mpc);
+ unsigned char *mpt = ((unsigned char *)mpc) + count;
+
+ if (!smp_check_mpc(mpc, oem, str))
+ return 0;
+
+#ifdef CONFIG_X86_32
+ /*
+ * need to make sure summit and es7000's mps_oem_check is safe to be
+ * called early via genericarch 's mps_oem_check
+ */
+ if (early) {
+#ifdef CONFIG_X86_NUMAQ
+ numaq_mps_oem_check(mpc, oem, str);
+#endif
+ } else
+ mps_oem_check(mpc, oem, str);
+#endif
+
/* save the local APIC address, it might be non-default */
if (!acpi_lapic)
mp_lapic_addr = mpc->mpc_lapic;
@@ -352,7 +488,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
{
struct mpc_config_bus *m =
(struct mpc_config_bus *)mpt;
+#ifdef CONFIG_X86_IO_APIC
MP_bus_info(m);
+#endif
mpt += sizeof(*m);
count += sizeof(*m);
break;
@@ -402,6 +540,11 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
++mpc_record;
#endif
}
+
+#ifdef CONFIG_X86_GENERICARCH
+ generic_bigsmp_probe();
+#endif
+
setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
@@ -427,7 +570,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
intsrc.mpc_type = MP_INTSRC;
intsrc.mpc_irqflag = 0; /* conforming */
intsrc.mpc_srcbus = 0;
- intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+ intsrc.mpc_dstapic = mp_ioapics[0].mp_apicid;
intsrc.mpc_irqtype = mp_INT;
@@ -488,40 +631,11 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
MP_intsrc_info(&intsrc);
}
-#endif
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+static void construct_ioapic_table(int mpc_default_type)
{
- struct mpc_config_processor processor;
- struct mpc_config_bus bus;
-#ifdef CONFIG_X86_IO_APIC
struct mpc_config_ioapic ioapic;
-#endif
- struct mpc_config_lintsrc lintsrc;
- int linttypes[2] = { mp_ExtINT, mp_NMI };
- int i;
-
- /*
- * local APIC has default address
- */
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /*
- * 2 CPUs, numbered 0 & 1.
- */
- processor.mpc_type = MP_PROCESSOR;
- /* Either an integrated APIC or a discrete 82489DX. */
- processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- processor.mpc_cpuflag = CPU_ENABLED;
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
- for (i = 0; i < 2; i++) {
- processor.mpc_apicid = i;
- MP_processor_info(&processor);
- }
+ struct mpc_config_bus bus;
bus.mpc_type = MP_BUS;
bus.mpc_busid = 0;
@@ -550,7 +664,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
MP_bus_info(&bus);
}
-#ifdef CONFIG_X86_IO_APIC
ioapic.mpc_type = MP_IOAPIC;
ioapic.mpc_apicid = 2;
ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
@@ -562,7 +675,42 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
* We set up most of the low 16 IO-APIC pins according to MPS rules.
*/
construct_default_ioirq_mptable(mpc_default_type);
+}
+#else
+static inline void construct_ioapic_table(int mpc_default_type) { }
#endif
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+ struct mpc_config_processor processor;
+ struct mpc_config_lintsrc lintsrc;
+ int linttypes[2] = { mp_ExtINT, mp_NMI };
+ int i;
+
+ /*
+ * local APIC has default address
+ */
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+ /*
+ * 2 CPUs, numbered 0 & 1.
+ */
+ processor.mpc_type = MP_PROCESSOR;
+ /* Either an integrated APIC or a discrete 82489DX. */
+ processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ processor.mpc_cpuflag = CPU_ENABLED;
+ processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+ (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+ processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_reserved[0] = 0;
+ processor.mpc_reserved[1] = 0;
+ for (i = 0; i < 2; i++) {
+ processor.mpc_apicid = i;
+ MP_processor_info(&processor);
+ }
+
+ construct_ioapic_table(mpc_default_type);
+
lintsrc.mpc_type = MP_LINTSRC;
lintsrc.mpc_irqflag = 0; /* conforming */
lintsrc.mpc_srcbusid = 0;
@@ -600,7 +748,7 @@ static void __init __get_smp_config(unsigned early)
printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
mpf->mpf_specification);
-#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
if (mpf->mpf_feature2 & (1 << 7)) {
printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
pic_mode = 1;
@@ -632,7 +780,9 @@ static void __init __get_smp_config(unsigned early)
* override the defaults.
*/
if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
+#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 0;
+#endif
printk(KERN_ERR
"BIOS bug, MP table errors detected!...\n");
printk(KERN_ERR "... disabling SMP support. "
@@ -689,7 +839,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
unsigned int *bp = phys_to_virt(base);
struct intel_mp_floating *mpf;
- Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
+ printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length);
BUILD_BUG_ON(sizeof(*mpf) != 16);
while (length > 0) {
@@ -699,8 +849,9 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
!mpf_checksum((unsigned char *)bp, 16) &&
((mpf->mpf_specification == 1)
|| (mpf->mpf_specification == 4))) {
-
+#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 1;
+#endif
mpf_found = mpf;
#ifdef CONFIG_X86_32
printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
@@ -790,298 +941,294 @@ void __init find_smp_config(void)
__find_smp_config(1);
}
-/* --------------------------------------------------------------------------
- ACPI-based MP Configuration
- -------------------------------------------------------------------------- */
+#ifdef CONFIG_X86_IO_APIC
+static u8 __initdata irq_used[MAX_IRQ_SOURCES];
-/*
- * Keep this outside and initialized to 0, for !CONFIG_ACPI builds:
- */
-int es7000_plat;
+static int __init get_MP_intsrc_index(struct mpc_config_intsrc *m)
+{
+ int i;
-#ifdef CONFIG_ACPI
+ if (m->mpc_irqtype != mp_INT)
+ return 0;
-#ifdef CONFIG_X86_IO_APIC
+ if (m->mpc_irqflag != 0x0f)
+ return 0;
-#define MP_ISA_BUS 0
+ /* not legacy */
-extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
+ for (i = 0; i < mp_irq_entries; i++) {
+ if (mp_irqs[i].mp_irqtype != mp_INT)
+ continue;
-static int mp_find_ioapic(int gsi)
-{
- int i = 0;
+ if (mp_irqs[i].mp_irqflag != 0x0f)
+ continue;
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
+ if (mp_irqs[i].mp_srcbus != m->mpc_srcbus)
+ continue;
+ if (mp_irqs[i].mp_srcbusirq != m->mpc_srcbusirq)
+ continue;
+ if (irq_used[i]) {
+ /* already claimed */
+ return -2;
+ }
+ irq_used[i] = 1;
+ return i;
}
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ /* not found */
return -1;
}
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- return io_apic_get_unique_id(nr_ioapics, id);
- else
- return id;
-#else
- int i;
- DECLARE_BITMAP(used, 256);
- bitmap_zero(used, 256);
- for (i = 0; i < nr_ioapics; i++) {
- struct mpc_config_ioapic *ia = &mp_ioapics[i];
- __set_bit(ia->mpc_apicid, used);
- }
- if (!test_bit(id, used))
- return id;
- return find_first_zero_bit(used, 256);
+#define SPARE_SLOT_NUM 20
+
+static struct mpc_config_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
#endif
-}
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+static int __init replace_intsrc_all(struct mp_config_table *mpc,
+ unsigned long mpc_new_phys,
+ unsigned long mpc_new_length)
{
- int idx = 0;
-
- if (bad_ioapic(address))
- return;
+#ifdef CONFIG_X86_IO_APIC
+ int i;
+ int nr_m_spare = 0;
+#endif
- idx = nr_ioapics;
+ int count = sizeof(*mpc);
+ unsigned char *mpt = ((unsigned char *)mpc) + count;
- mp_ioapics[idx].mpc_type = MP_IOAPIC;
- mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
- mp_ioapics[idx].mpc_apicaddr = address;
+ printk(KERN_INFO "mpc_length %x\n", mpc->mpc_length);
+ while (count < mpc->mpc_length) {
+ switch (*mpt) {
+ case MP_PROCESSOR:
+ {
+ struct mpc_config_processor *m =
+ (struct mpc_config_processor *)mpt;
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_BUS:
+ {
+ struct mpc_config_bus *m =
+ (struct mpc_config_bus *)mpt;
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_IOAPIC:
+ {
+ mpt += sizeof(struct mpc_config_ioapic);
+ count += sizeof(struct mpc_config_ioapic);
+ break;
+ }
+ case MP_INTSRC:
+ {
+#ifdef CONFIG_X86_IO_APIC
+ struct mpc_config_intsrc *m =
+ (struct mpc_config_intsrc *)mpt;
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
- mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-#else
- mp_ioapics[idx].mpc_apicver = 0;
+ printk(KERN_INFO "OLD ");
+ print_MP_intsrc_info(m);
+ i = get_MP_intsrc_index(m);
+ if (i > 0) {
+ assign_to_mpc_intsrc(&mp_irqs[i], m);
+ printk(KERN_INFO "NEW ");
+ print_mp_irq_info(&mp_irqs[i]);
+ } else if (!i) {
+ /* legacy, do nothing */
+ } else if (nr_m_spare < SPARE_SLOT_NUM) {
+ /*
+ * not found (-1), or duplicated (-2)
+ * are invalid entries,
+ * we need to use the slot later
+ */
+ m_spare[nr_m_spare] = m;
+ nr_m_spare++;
+ }
#endif
- /*
- * Build basic GSI lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
- */
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
- mp_ioapic_routing[idx].gsi_base = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
- mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
- nr_ioapics++;
-}
+ mpt += sizeof(struct mpc_config_intsrc);
+ count += sizeof(struct mpc_config_intsrc);
+ break;
+ }
+ case MP_LINTSRC:
+ {
+ struct mpc_config_lintsrc *m =
+ (struct mpc_config_lintsrc *)mpt;
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ default:
+ /* wrong mptable */
+ printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n");
+ printk(KERN_ERR "type %x\n", *mpt);
+ print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16,
+ 1, mpc, mpc->mpc_length, 1);
+ goto out;
+ }
+ }
-void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
- struct mpc_config_intsrc intsrc;
- int ioapic = -1;
- int pin = -1;
+#ifdef CONFIG_X86_IO_APIC
+ for (i = 0; i < mp_irq_entries; i++) {
+ if (irq_used[i])
+ continue;
- /*
- * Convert 'gsi' to 'ioapic.pin'.
- */
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return;
- pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+ if (mp_irqs[i].mp_irqtype != mp_INT)
+ continue;
- /*
- * TBD: This check is for faulty timer entries, where the override
- * erroneously sets the trigger to level, resulting in a HUGE
- * increase of timer interrupts!
- */
- if ((bus_irq == 0) && (trigger == 3))
- trigger = 1;
+ if (mp_irqs[i].mp_irqflag != 0x0f)
+ continue;
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_irqflag = (trigger << 2) | polarity;
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
- intsrc.mpc_dstirq = pin; /* INTIN# */
+ if (nr_m_spare > 0) {
+ printk(KERN_INFO "*NEW* found ");
+ nr_m_spare--;
+ assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]);
+ m_spare[nr_m_spare] = NULL;
+ } else {
+ struct mpc_config_intsrc *m =
+ (struct mpc_config_intsrc *)mpt;
+ count += sizeof(struct mpc_config_intsrc);
+ if (!mpc_new_phys) {
+ printk(KERN_INFO "No spare slots, try to append...take your risk, new mpc_length %x\n", count);
+ } else {
+ if (count <= mpc_new_length)
+ printk(KERN_INFO "No spare slots, try to append..., new mpc_length %x\n", count);
+ else {
+ printk(KERN_ERR "mpc_new_length %lx is too small\n", mpc_new_length);
+ goto out;
+ }
+ }
+ assign_to_mpc_intsrc(&mp_irqs[i], m);
+ mpc->mpc_length = count;
+ mpt += sizeof(struct mpc_config_intsrc);
+ }
+ print_mp_irq_info(&mp_irqs[i]);
+ }
+#endif
+out:
+ /* update checksum */
+ mpc->mpc_checksum = 0;
+ mpc->mpc_checksum -= mpf_checksum((unsigned char *)mpc,
+ mpc->mpc_length);
- MP_intsrc_info(&intsrc);
+ return 0;
}
-void __init mp_config_acpi_legacy_irqs(void)
-{
- struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
+int __initdata enable_update_mptable;
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
- /*
- * Fabricate the legacy ISA bus (bus #31).
- */
- mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
-#endif
- set_bit(MP_ISA_BUS, mp_bus_not_pci);
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+static int __init update_mptable_setup(char *str)
+{
+ enable_update_mptable = 1;
+ return 0;
+}
+early_param("update_mptable", update_mptable_setup);
- /*
- * Older generations of ES7000 have no legacy identity mappings
- */
- if (es7000_plat == 1)
- return;
+static unsigned long __initdata mpc_new_phys;
+static unsigned long mpc_new_length __initdata = 4096;
- /*
- * Locate the IOAPIC that manages the ISA IRQs (0-15).
- */
- ioapic = mp_find_ioapic(0);
- if (ioapic < 0)
- return;
+/* alloc_mptable or alloc_mptable=4k */
+static int __initdata alloc_mptable;
+static int __init parse_alloc_mptable_opt(char *p)
+{
+ enable_update_mptable = 1;
+ alloc_mptable = 1;
+ if (!p)
+ return 0;
+ mpc_new_length = memparse(p, &p);
+ return 0;
+}
+early_param("alloc_mptable", parse_alloc_mptable_opt);
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* Conforming */
- intsrc.mpc_srcbus = MP_ISA_BUS;
-#ifdef CONFIG_X86_IO_APIC
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
+void __init early_reserve_e820_mpc_new(void)
+{
+ if (enable_update_mptable && alloc_mptable) {
+ u64 startt = 0;
+#ifdef CONFIG_X86_TRAMPOLINE
+ startt = TRAMPOLINE_BASE;
#endif
- /*
- * Use the default configuration for the IRQs 0-15. Unless
- * overridden by (MADT) interrupt source override entries.
- */
- for (i = 0; i < 16; i++) {
- int idx;
-
- for (idx = 0; idx < mp_irq_entries; idx++) {
- struct mpc_config_intsrc *irq = mp_irqs + idx;
-
- /* Do we already have a mapping for this ISA IRQ? */
- if (irq->mpc_srcbus == MP_ISA_BUS
- && irq->mpc_srcbusirq == i)
- break;
-
- /* Do we already have a mapping for this IOAPIC pin */
- if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
- (irq->mpc_dstirq == i))
- break;
- }
-
- if (idx != mp_irq_entries) {
- printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
- continue; /* IRQ already used */
- }
-
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_srcbusirq = i; /* Identity mapped */
- intsrc.mpc_dstirq = i;
-
- MP_intsrc_info(&intsrc);
+ mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4);
}
}
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int __init update_mp_table(void)
{
- int ioapic;
- int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
+ char str[16];
+ char oem[10];
+ struct intel_mp_floating *mpf;
+ struct mp_config_table *mpc;
+ struct mp_config_table *mpc_new;
+
+ if (!enable_update_mptable)
+ return 0;
+
+ mpf = mpf_found;
+ if (!mpf)
+ return 0;
- static int pci_irq = IRQ_COMPRESSION_START;
/*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
+ * Now see if we need to go further.
*/
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
-
- if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
- return gsi;
-#endif
+ if (mpf->mpf_feature1 != 0)
+ return 0;
- /* Don't set up the ACPI SCI because it's already set up */
- if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
+ if (!mpf->mpf_physptr)
+ return 0;
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0) {
- printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
- return gsi;
- }
+ mpc = phys_to_virt(mpf->mpf_physptr);
- ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+ if (!smp_check_mpc(mpc, oem, str))
+ return 0;
-#ifdef CONFIG_X86_32
- if (ioapic_renumber_irq)
- gsi = ioapic_renumber_irq(ioapic, gsi);
-#endif
+ printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf));
+ printk(KERN_INFO "mpf_physptr: %x\n", mpf->mpf_physptr);
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
- printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
- ioapic_pin);
- return gsi;
+ if (mpc_new_phys && mpc->mpc_length > mpc_new_length) {
+ mpc_new_phys = 0;
+ printk(KERN_INFO "mpc_new_length is %ld, please use alloc_mptable=8k\n",
+ mpc_new_length);
}
- if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
- return gsi;
-#endif
+
+ if (!mpc_new_phys) {
+ unsigned char old, new;
+ /* check if we can change the postion */
+ mpc->mpc_checksum = 0;
+ old = mpf_checksum((unsigned char *)mpc, mpc->mpc_length);
+ mpc->mpc_checksum = 0xff;
+ new = mpf_checksum((unsigned char *)mpc, mpc->mpc_length);
+ if (old == new) {
+ printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n");
+ return 0;
+ }
+ printk(KERN_INFO "use in-positon replacing\n");
+ } else {
+ mpf->mpf_physptr = mpc_new_phys;
+ mpc_new = phys_to_virt(mpc_new_phys);
+ memcpy(mpc_new, mpc, mpc->mpc_length);
+ mpc = mpc_new;
+ /* check if we can modify that */
+ if (mpc_new_phys - mpf->mpf_physptr) {
+ struct intel_mp_floating *mpf_new;
+ /* steal 16 bytes from [0, 1k) */
+ printk(KERN_INFO "mpf new: %x\n", 0x400 - 16);
+ mpf_new = phys_to_virt(0x400 - 16);
+ memcpy(mpf_new, mpf, 16);
+ mpf = mpf_new;
+ mpf->mpf_physptr = mpc_new_phys;
+ }
+ mpf->mpf_checksum = 0;
+ mpf->mpf_checksum -= mpf_checksum((unsigned char *)mpf, 16);
+ printk(KERN_INFO "mpf_physptr new: %x\n", mpf->mpf_physptr);
}
- set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
/*
- * For GSI >= 64, use IRQ compression
+ * only replace the one with mp_INT and
+ * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
+ * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
+ * may need pci=routeirq for all coverage
*/
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
+ replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
+
+ return 0;
}
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
+late_initcall(update_mp_table);
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index e65281b1634b..f0f1de1c4a1d 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -31,6 +31,8 @@
#include <asm/numaq.h>
#include <asm/topology.h>
#include <asm/processor.h>
+#include <asm/mpspec.h>
+#include <asm/e820.h>
#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
@@ -58,6 +60,8 @@ static void __init smp_dump_qct(void)
node_end_pfn[node] = MB_TO_PAGES(
eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
+ e820_register_active_regions(node, node_start_pfn[node],
+ node_end_pfn[node]);
memory_present(node,
node_start_pfn[node], node_end_pfn[node]);
node_remap_size[node] = node_memmap_size_bytes(node,
@@ -67,13 +71,24 @@ static void __init smp_dump_qct(void)
}
}
-/*
- * Unlike Summit, we don't really care to let the NUMA-Q
- * fall back to flat mode. Don't compile for NUMA-Q
- * unless you really need it!
- */
+static __init void early_check_numaq(void)
+{
+ /*
+ * Find possible boot-time SMP configuration:
+ */
+ early_find_smp_config();
+ /*
+ * get boot-time SMP configuration:
+ */
+ if (smp_found_config)
+ early_get_smp_config();
+}
+
int __init get_memcfg_numaq(void)
{
+ early_check_numaq();
+ if (!found_numaq)
+ return 0;
smp_dump_qct();
return 1;
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6f80b852a196..45a5e247d450 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -17,6 +17,7 @@ unsigned int num_processors;
unsigned disabled_cpus __cpuinitdata;
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
+unsigned int max_physical_apicid;
EXPORT_SYMBOL(boot_cpu_physical_apicid);
DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
@@ -137,3 +138,25 @@ void __init setup_per_cpu_areas(void)
}
#endif
+
+void __init parse_setup_data(void)
+{
+ struct setup_data *data;
+ u64 pa_data;
+
+ if (boot_params.hdr.version < 0x0209)
+ return;
+ pa_data = boot_params.hdr.setup_data;
+ while (pa_data) {
+ data = early_ioremap(pa_data, PAGE_SIZE);
+ switch (data->type) {
+ default:
+ break;
+ }
+#ifndef CONFIG_DEBUG_BOOT_PARAMS
+ free_early(pa_data, pa_data+sizeof(*data)+data->len);
+#endif
+ pa_data = data->next;
+ early_iounmap(data, PAGE_SIZE);
+ }
+}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 5a2f8e063887..1d4be07e15e5 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -67,10 +67,12 @@
#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
+#include <asm/efi.h>
/* This value is set up by the early boot code to point to the value
immediately after the boot time page tables. It contains a *physical*
address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_start __initdata = ~0UL;
unsigned long init_pg_tables_end __initdata = ~0UL;
/*
@@ -237,42 +239,6 @@ static inline void copy_edd(void)
}
#endif
-int __initdata user_defined_memmap;
-
-/*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem= [also see Documentation/i386/boot.txt]
- */
-static int __init parse_mem(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- if (strcmp(arg, "nopentium") == 0) {
- setup_clear_cpu_cap(X86_FEATURE_PSE);
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long mem_size;
-
- mem_size = memparse(arg, &arg);
- limit_regions(mem_size);
- user_defined_memmap = 1;
- }
- return 0;
-}
-early_param("mem", parse_mem);
-
#ifdef CONFIG_PROC_VMCORE
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel.
@@ -395,56 +361,6 @@ unsigned long __init find_max_low_pfn(void)
return max_low_pfn;
}
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
- unsigned int lowmem, ebda_addr;
-
- /* To determine the position of the EBDA and the */
- /* end of conventional memory, we need to look at */
- /* the BIOS data area. In a paravirtual environment */
- /* that area is absent. We'll just have to assume */
- /* that the paravirt case can handle memory setup */
- /* correctly, without our help. */
- if (paravirt_enabled())
- return;
-
- /* end of low (conventional) memory */
- lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
- lowmem <<= 10;
-
- /* start of EBDA area */
- ebda_addr = get_bios_ebda();
-
- /* Fixup: bios puts an EBDA in the top 64K segment */
- /* of conventional memory, but does not adjust lowmem. */
- if ((lowmem - ebda_addr) <= 0x10000)
- lowmem = ebda_addr;
-
- /* Fixup: bios does not report an EBDA at all. */
- /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
- if ((ebda_addr == 0) && (lowmem >= 0x9f000))
- lowmem = 0x9f000;
-
- /* Paranoia: should never happen, but... */
- if ((lowmem == 0) || (lowmem >= 0x100000))
- lowmem = 0x9f000;
-
- /* reserve all memory between lowmem and the 1MB mark */
- reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
-}
-
#ifndef CONFIG_NEED_MULTIPLE_NODES
static void __init setup_bootmem_allocator(void);
static unsigned long __init setup_memory(void)
@@ -462,11 +378,13 @@ static unsigned long __init setup_memory(void)
if (max_pfn > max_low_pfn) {
highstart_pfn = max_low_pfn;
}
+ memory_present(0, 0, highend_pfn);
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
num_physpages = highend_pfn;
high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
#else
+ memory_present(0, 0, max_low_pfn);
num_physpages = max_low_pfn;
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
#endif
@@ -488,11 +406,12 @@ static void __init zone_sizes_init(void)
max_zone_pfns[ZONE_DMA] =
virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+ remove_all_active_ranges();
#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
- add_active_range(0, 0, highend_pfn);
+ e820_register_active_regions(0, 0, highend_pfn);
#else
- add_active_range(0, 0, max_low_pfn);
+ e820_register_active_regions(0, 0, max_low_pfn);
#endif
free_area_init_nodes(max_zone_pfns);
@@ -558,44 +477,57 @@ static bool do_relocate_initrd = false;
static void __init reserve_initrd(void)
{
- unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
- unsigned long ramdisk_size = boot_params.hdr.ramdisk_size;
- unsigned long ramdisk_end = ramdisk_image + ramdisk_size;
- unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
- unsigned long ramdisk_here;
-
- initrd_start = 0;
+ u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+ u64 ramdisk_size = boot_params.hdr.ramdisk_size;
+ u64 ramdisk_end = ramdisk_image + ramdisk_size;
+ u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+ u64 ramdisk_here;
if (!boot_params.hdr.type_of_loader ||
!ramdisk_image || !ramdisk_size)
return; /* No initrd provided by bootloader */
- if (ramdisk_end < ramdisk_image) {
- printk(KERN_ERR "initrd wraps around end of memory, "
- "disabling initrd\n");
- return;
- }
+ initrd_start = 0;
+
if (ramdisk_size >= end_of_lowmem/2) {
+ free_early(ramdisk_image, ramdisk_end);
printk(KERN_ERR "initrd too large to handle, "
"disabling initrd\n");
return;
}
+
+ printk(KERN_INFO "old RAMDISK: %08llx - %08llx\n", ramdisk_image,
+ ramdisk_end);
+
+
if (ramdisk_end <= end_of_lowmem) {
/* All in lowmem, easy case */
- reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT);
+ /*
+ * don't need to reserve again, already reserved early
+ * in i386_start_kernel
+ */
initrd_start = ramdisk_image + PAGE_OFFSET;
initrd_end = initrd_start+ramdisk_size;
return;
}
/* We need to move the initrd down into lowmem */
- ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK;
+ ramdisk_here = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+ end_of_lowmem, ramdisk_size,
+ PAGE_SIZE);
+
+ if (ramdisk_here == -1ULL)
+ panic("Cannot find place for new RAMDISK of size %lld\n",
+ ramdisk_size);
/* Note: this includes all the lowmem currently occupied by
the initrd, we rely on that fact to keep the data intact. */
- reserve_bootmem(ramdisk_here, ramdisk_size, BOOTMEM_DEFAULT);
+ reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
+ "NEW RAMDISK");
initrd_start = ramdisk_here + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
+ printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
+ ramdisk_here, ramdisk_here + ramdisk_size);
do_relocate_initrd = true;
}
@@ -604,10 +536,10 @@ static void __init reserve_initrd(void)
static void __init relocate_initrd(void)
{
- unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
- unsigned long ramdisk_size = boot_params.hdr.ramdisk_size;
- unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
- unsigned long ramdisk_here;
+ u64 ramdisk_image = boot_params.hdr.ramdisk_image;
+ u64 ramdisk_size = boot_params.hdr.ramdisk_size;
+ u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT;
+ u64 ramdisk_here;
unsigned long slop, clen, mapaddr;
char *p, *q;
@@ -624,6 +556,10 @@ static void __init relocate_initrd(void)
p = (char *)__va(ramdisk_image);
memcpy(q, p, clen);
q += clen;
+ /* need to free these low pages...*/
+ printk(KERN_INFO "Freeing old partial RAMDISK %08llx-%08llx\n",
+ ramdisk_image, ramdisk_image + clen - 1);
+ free_bootmem(ramdisk_image, clen);
ramdisk_image += clen;
ramdisk_size -= clen;
}
@@ -642,47 +578,44 @@ static void __init relocate_initrd(void)
ramdisk_image += clen;
ramdisk_size -= clen;
}
+ /* high pages is not converted by early_res_to_bootmem */
+ ramdisk_image = boot_params.hdr.ramdisk_image;
+ ramdisk_size = boot_params.hdr.ramdisk_size;
+ printk(KERN_INFO "Copied RAMDISK from %016llx - %016llx to %08llx - %08llx\n",
+ ramdisk_image, ramdisk_image + ramdisk_size - 1,
+ ramdisk_here, ramdisk_here + ramdisk_size - 1);
}
#endif /* CONFIG_BLK_DEV_INITRD */
void __init setup_bootmem_allocator(void)
{
- unsigned long bootmap_size;
+ int i;
+ unsigned long bootmap_size, bootmap;
/*
* Initialize the boot-time allocator (with low memory only):
*/
- bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
-
- register_bootmem_low_pages(max_low_pfn);
-
- /*
- * Reserve the bootmem bitmap itself as well. We do this in two
- * steps (first step was init_bootmem()) because this catches
- * the (very unlikely) case of us accidentally initializing the
- * bootmem allocator with an invalid RAM area.
- */
- reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
- bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text),
- BOOTMEM_DEFAULT);
-
- /*
- * reserve physical page 0 - it's a special BIOS page on many boxes,
- * enabling clean reboots, SMP operation, laptop functions.
- */
- reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
-
- /* reserve EBDA region */
- reserve_ebda_region();
-
-#ifdef CONFIG_SMP
- /*
- * But first pinch a few for the stack/trampoline stuff
- * FIXME: Don't need the extra page at 4K, but need to fix
- * trampoline before removing it. (see the GDT stuff)
- */
- reserve_bootmem(PAGE_SIZE, PAGE_SIZE, BOOTMEM_DEFAULT);
+ bootmap_size = bootmem_bootmap_pages(max_low_pfn)<<PAGE_SHIFT;
+ bootmap = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+ max_pfn_mapped<<PAGE_SHIFT, bootmap_size,
+ PAGE_SIZE);
+ if (bootmap == -1L)
+ panic("Cannot find bootmem map of size %ld\n", bootmap_size);
+ reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP");
+#ifdef CONFIG_BLK_DEV_INITRD
+ reserve_initrd();
#endif
+ bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, max_low_pfn);
+ printk(KERN_INFO " mapped low ram: 0 - %08lx\n",
+ max_pfn_mapped<<PAGE_SHIFT);
+ printk(KERN_INFO " low ram: %08lx - %08lx\n",
+ min_low_pfn<<PAGE_SHIFT, max_low_pfn<<PAGE_SHIFT);
+ printk(KERN_INFO " bootmap %08lx - %08lx\n",
+ bootmap, bootmap + bootmap_size);
+ for_each_online_node(i)
+ free_bootmem_with_active_regions(i, max_low_pfn);
+ early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
+
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
@@ -695,10 +628,6 @@ void __init setup_bootmem_allocator(void)
*/
find_smp_config();
#endif
-#ifdef CONFIG_BLK_DEV_INITRD
- reserve_initrd();
-#endif
- numa_kva_reserve();
reserve_crashkernel();
reserve_ibft_region();
@@ -731,12 +660,6 @@ static void set_mca_bus(int x)
static void set_mca_bus(int x) { }
#endif
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
- return machine_specific_memory_setup();
-}
-
#ifdef CONFIG_NUMA
/*
* In the golden day, when everything among i386 and x86_64 will be
@@ -764,11 +687,14 @@ void __init setup_arch(char **cmdline_p)
pre_setup_arch_hook();
early_cpu_init();
early_ioremap_init();
+ reserve_setup_data();
#ifdef CONFIG_EFI
if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
- "EL32", 4))
+ "EL32", 4)) {
efi_enabled = 1;
+ efi_reserve_early();
+ }
#endif
ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
@@ -792,8 +718,7 @@ void __init setup_arch(char **cmdline_p)
#endif
ARCH_SETUP
- printk(KERN_INFO "BIOS-provided physical RAM map:\n");
- print_memory_map(memory_setup());
+ setup_memory_map();
copy_edd();
@@ -811,12 +736,11 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;
+ parse_setup_data();
+
parse_early_param();
- if (user_defined_memmap) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- print_memory_map("user");
- }
+ finish_e820_parsing();
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
@@ -824,11 +748,22 @@ void __init setup_arch(char **cmdline_p)
if (efi_enabled)
efi_init();
+ e820_register_active_regions(0, 0, -1UL);
+ /*
+ * partially used pages are not usable - thus
+ * we are rounding upwards:
+ */
+ max_pfn = e820_end_of_ram();
+
+ /* preallocate 4k for mptable mpc */
+ early_reserve_e820_mpc_new();
/* update e820 for memory not covered by WB MTRRs */
- propagate_e820_map();
mtrr_bp_init();
- if (mtrr_trim_uncached_memory(max_pfn))
- propagate_e820_map();
+ if (mtrr_trim_uncached_memory(max_pfn)) {
+ remove_all_active_ranges();
+ e820_register_active_regions(0, 0, -1UL);
+ max_pfn = e820_end_of_ram();
+ }
max_low_pfn = setup_memory();
@@ -855,9 +790,6 @@ void __init setup_arch(char **cmdline_p)
* not to exceed the 8Mb limit.
*/
-#ifdef CONFIG_SMP
- smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
-#endif
paging_init();
/*
@@ -914,21 +846,20 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_ACPI
acpi_boot_init();
-
+#endif
+#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
+ if (smp_found_config)
+ get_smp_config();
+#endif
#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
if (def_to_bigsmp)
printk(KERN_WARNING "More than 8 CPUs detected and "
"CONFIG_X86_PC cannot handle it.\nUse "
"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
#endif
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
- if (smp_found_config)
- get_smp_config();
-#endif
- e820_register_memory();
- e820_mark_nosave_regions();
+ e820_setup_gap();
+ e820_mark_nosave_regions(max_low_pfn);
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 6dff1286ad8a..26d60cc0e370 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -56,6 +56,7 @@
#include <asm/desc.h>
#include <video/edid.h>
#include <asm/e820.h>
+#include <asm/mpspec.h>
#include <asm/dma.h>
#include <asm/gart.h>
#include <asm/mpspec.h>
@@ -271,28 +272,6 @@ void __attribute__((weak)) __init memory_setup(void)
machine_specific_memory_setup();
}
-static void __init parse_setup_data(void)
-{
- struct setup_data *data;
- unsigned long pa_data;
-
- if (boot_params.hdr.version < 0x0209)
- return;
- pa_data = boot_params.hdr.setup_data;
- while (pa_data) {
- data = early_ioremap(pa_data, PAGE_SIZE);
- switch (data->type) {
- default:
- break;
- }
-#ifndef CONFIG_DEBUG_BOOT_PARAMS
- free_early(pa_data, pa_data+sizeof(*data)+data->len);
-#endif
- pa_data = data->next;
- early_iounmap(data, PAGE_SIZE);
- }
-}
-
#ifdef CONFIG_PCI_MMCONFIG
extern void __cpuinit fam10h_check_enable_mmcfg(void);
extern void __init check_enable_amd_mmconf_dmi(void);
@@ -329,8 +308,10 @@ void __init setup_arch(char **cmdline_p)
#endif
#ifdef CONFIG_EFI
if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
- "EL64", 4))
+ "EL64", 4)) {
efi_enabled = 1;
+ efi_reserve_early();
+ }
#endif
ARCH_SETUP
@@ -381,9 +362,13 @@ void __init setup_arch(char **cmdline_p)
* we are rounding upwards:
*/
end_pfn = e820_end_of_ram();
+
+ /* pre allocte 4k for mptable mpc */
+ early_reserve_e820_mpc_new();
/* update e820 for memory not covered by WB MTRRs */
mtrr_bp_init();
if (mtrr_trim_uncached_memory(end_pfn)) {
+ remove_all_active_ranges();
e820_register_active_regions(0, 0, -1UL);
end_pfn = e820_end_of_ram();
}
@@ -392,7 +377,7 @@ void __init setup_arch(char **cmdline_p)
check_efer();
- max_pfn_mapped = init_memory_mapping(0, (max_pfn_mapped << PAGE_SHIFT));
+ max_pfn_mapped = init_memory_mapping(0, (end_pfn << PAGE_SHIFT));
if (efi_enabled)
efi_init();
@@ -453,13 +438,12 @@ void __init setup_arch(char **cmdline_p)
acpi_reserve_bootmem();
#endif
- if (efi_enabled)
- efi_reserve_bootmem();
-
+#ifdef CONFIG_X86_MPPARSE
/*
* Find and reserve possible boot-time SMP configuration:
*/
find_smp_config();
+#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
@@ -502,11 +486,13 @@ void __init setup_arch(char **cmdline_p)
init_cpu_to_node();
+#ifdef CONFIG_X86_MPPARSE
/*
* get boot-time SMP configuration:
*/
if (smp_found_config)
get_smp_config();
+#endif
init_apic_mappings();
ioapic_init_mappings();
@@ -516,7 +502,7 @@ void __init setup_arch(char **cmdline_p)
* We trust e820 completely. No explicit ROM probing in memory.
*/
e820_reserve_resources();
- e820_mark_nosave_regions();
+ e820_mark_nosave_regions(end_pfn);
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3e1cecedde42..83e62137911b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -555,23 +555,6 @@ cpumask_t cpu_coregroup_map(int cpu)
return c->llc_shared_map;
}
-#ifdef CONFIG_X86_32
-/*
- * We are called very early to get the low memory for the
- * SMP bootup trampoline page.
- */
-void __init smp_alloc_memory(void)
-{
- trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
- /*
- * Has to be in very low memory so we can execute
- * real-mode AP code.
- */
- if (__pa(trampoline_base) >= 0x9F000)
- BUG();
-}
-#endif
-
static void impress_friends(void)
{
int cpu;
diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c
index 70e4a374b4e8..e9d91720a40f 100644
--- a/arch/x86/kernel/srat_32.c
+++ b/arch/x86/kernel/srat_32.c
@@ -31,6 +31,7 @@
#include <asm/srat.h>
#include <asm/topology.h>
#include <asm/smp.h>
+#include <asm/e820.h>
/*
* proximity macros and definitions
@@ -244,12 +245,13 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
node_read_chunk(chunk->nid, chunk);
- add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn);
+ e820_register_active_regions(chunk->nid, chunk->start_pfn,
+ min(chunk->end_pfn, max_pfn));
}
for_each_online_node(nid) {
unsigned long start = node_start_pfn[nid];
- unsigned long end = node_end_pfn[nid];
+ unsigned long end = min(node_end_pfn[nid], max_pfn);
memory_present(nid, start, end);
node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
@@ -261,7 +263,7 @@ out_fail:
struct acpi_static_rsdt {
struct acpi_table_rsdt table;
- u32 padding[7]; /* Allow for 7 more table entries */
+ u32 padding[32]; /* Allow for 32 more table entries */
};
int __init get_memcfg_from_srat(void)
@@ -297,7 +299,7 @@ int __init get_memcfg_from_srat(void)
}
rsdt = (struct acpi_table_rsdt *)
- early_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt));
+ early_ioremap(rsdp->rsdt_physical_address, sizeof(saved_rsdt));
if (!rsdt) {
printk(KERN_WARNING
@@ -310,6 +312,7 @@ int __init get_memcfg_from_srat(void)
if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) {
printk(KERN_WARNING "ACPI: RSDT signature incorrect\n");
+ early_iounmap(rsdt, sizeof(saved_rsdt));
goto out_err;
}
@@ -319,37 +322,51 @@ int __init get_memcfg_from_srat(void)
* size of RSDT) divided by the size of each entry
* (4-byte table pointers).
*/
- tables = (header->length - sizeof(struct acpi_table_header)) / 4;
+ tables = (header->length - sizeof(struct acpi_table_header)) / sizeof(u32);
if (!tables)
goto out_err;
memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt));
-
+ early_iounmap(rsdt, sizeof(saved_rsdt));
if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) {
printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n",
saved_rsdt.table.header.length);
goto out_err;
}
- printk("Begin SRAT table scan....\n");
+ printk("Begin SRAT table scan....%d\n", tables);
- for (i = 0; i < tables; i++) {
+ for (i = 0; i < tables; i++){
+ int result;
+ u32 length;
/* Map in header, then map in full table length. */
header = (struct acpi_table_header *)
early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header));
if (!header)
break;
+
+ printk(KERN_INFO "ACPI: %4.4s %08lX, %04X\n",
+ header->signature,
+ (unsigned long)saved_rsdt.table.table_offset_entry[i],
+ header->length);
+
+ if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) {
+ early_iounmap(header, sizeof(struct acpi_table_header));
+ continue;
+ }
+
+ length = header->length;
+ early_iounmap(header, sizeof(struct acpi_table_header));
header = (struct acpi_table_header *)
- early_ioremap(saved_rsdt.table.table_offset_entry[i], header->length);
+ early_ioremap(saved_rsdt.table.table_offset_entry[i], length);
if (!header)
break;
- if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4))
- continue;
-
/* we've found the srat table. don't need to look at any more tables */
- return acpi20_parse_srat((struct acpi_table_srat *)header);
+ result = acpi20_parse_srat((struct acpi_table_srat *)header);
+ early_iounmap(header, length);
+ return result;
}
out_err:
remove_all_active_ranges();
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index ae751094eba9..d67ce5f044ba 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -36,7 +36,9 @@ static struct rio_table_hdr *rio_table_hdr __initdata;
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
+#ifndef CONFIG_X86_NUMAQ
static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
{
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index abbf199adebb..1106fac6024d 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -2,7 +2,7 @@
#include <asm/trampoline.h>
-/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
+/* ready for x86_64 and x86 */
unsigned char *trampoline_base = __va(TRAMPOLINE_BASE);
/*
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 5c7e2fd52075..5e4772907c6e 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1012,6 +1012,7 @@ __init void lguest_init(void)
* clobbered. The Launcher places our initial pagetables somewhere at
* the top of our physical memory, so we don't need extra space: set
* init_pg_tables_end to the end of the kernel. */
+ init_pg_tables_start = __pa(pg0);
init_pg_tables_end = __pa(pg0);
/* Load the %fs segment register (the per-cpu segment register) with
@@ -1065,9 +1066,9 @@ __init void lguest_init(void)
pm_power_off = lguest_power_off;
machine_ops.restart = lguest_restart;
- /* Now we're set up, call start_kernel() in init/main.c and we proceed
+ /* Now we're set up, call i386_start_kernel() in head32.c and we proceed
* to boot as normal. It never returns. */
- start_kernel();
+ i386_start_kernel();
}
/*
* This marks the end of stage II of our journey, The Guest.
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 0c28a071824c..56b4c39cb7fa 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -153,6 +153,7 @@ late_initcall(print_ipi_mode);
char * __init machine_specific_memory_setup(void)
{
char *who;
+ int new_nr;
who = "BIOS-e820";
@@ -163,7 +164,11 @@ char * __init machine_specific_memory_setup(void)
* Otherwise fake a memory map; one section from 0k->640k,
* the next section from 1mb->appropriate_mem_k
*/
- sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
+ new_nr = boot_params.e820_entries;
+ sanitize_e820_map(boot_params.e820_map,
+ ARRAY_SIZE(boot_params.e820_map),
+ &new_nr);
+ boot_params.e820_entries = new_nr;
if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries)
< 0) {
unsigned long mem_size;
diff --git a/arch/x86/mach-es7000/Makefile b/arch/x86/mach-es7000/Makefile
index 69dd4da218dc..3ef8b43b62fc 100644
--- a/arch/x86/mach-es7000/Makefile
+++ b/arch/x86/mach-es7000/Makefile
@@ -3,4 +3,3 @@
#
obj-$(CONFIG_X86_ES7000) := es7000plat.o
-obj-$(CONFIG_X86_GENERICARCH) := es7000plat.o
diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
index f5d6f7d8b86e..4354ce804889 100644
--- a/arch/x86/mach-es7000/es7000plat.c
+++ b/arch/x86/mach-es7000/es7000plat.c
@@ -52,6 +52,8 @@ static struct mip_reg *host_reg;
static int mip_port;
static unsigned long mip_addr, host_addr;
+int es7000_plat;
+
/*
* GSI override for ES7000 platforms.
*/
@@ -175,53 +177,6 @@ find_unisys_acpi_oem_table(unsigned long *oem_addr)
}
#endif
-/*
- * This file also gets compiled if CONFIG_X86_GENERICARCH is set. Generic
- * arch already has got following function definitions (asm-generic/es7000.c)
- * hence no need to define these for that case.
- */
-#ifndef CONFIG_X86_GENERICARCH
-void es7000_sw_apic(void);
-void __init enable_apic_mode(void)
-{
- es7000_sw_apic();
- return;
-}
-
-__init int mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
-{
- if (mpc->mpc_oemptr) {
- struct mp_config_oemtable *oem_table =
- (struct mp_config_oemtable *)mpc->mpc_oemptr;
- if (!strncmp(oem, "UNISYS", 6))
- return parse_unisys_oem((char *)oem_table);
- }
- return 0;
-}
-#ifdef CONFIG_ACPI
-/* Hook from generic ACPI tables.c */
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- unsigned long oem_addr;
- if (!find_unisys_acpi_oem_table(&oem_addr)) {
- if (es7000_check_dsdt())
- return parse_unisys_oem((char *)oem_addr);
- else {
- setup_unisys();
- return 1;
- }
- }
- return 0;
-}
-#else
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- return 0;
-}
-#endif
-#endif /* COFIG_X86_GENERICARCH */
-
static void
es7000_spin(int n)
{
diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile
index 19d6d407737b..0dbd7803a1d5 100644
--- a/arch/x86/mach-generic/Makefile
+++ b/arch/x86/mach-generic/Makefile
@@ -2,7 +2,11 @@
# Makefile for the generic architecture
#
-EXTRA_CFLAGS := -Iarch/x86/kernel
+EXTRA_CFLAGS := -Iarch/x86/kernel
-obj-y := probe.o summit.o bigsmp.o es7000.o default.o
-obj-y += ../../x86/mach-es7000/
+obj-y := probe.o default.o
+obj-$(CONFIG_X86_NUMAQ) += numaq.o
+obj-$(CONFIG_X86_SUMMIT) += summit.o
+obj-$(CONFIG_X86_BIGSMP) += bigsmp.o
+obj-$(CONFIG_X86_ES7000) += es7000.o
+obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 95fc463056d0..59d771714559 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -23,10 +23,8 @@ static int dmi_bigsmp; /* can be set by dmi scanners */
static int hp_ht_bigsmp(const struct dmi_system_id *d)
{
-#ifdef CONFIG_X86_GENERICARCH
printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
dmi_bigsmp = 1;
-#endif
return 0;
}
@@ -48,7 +46,7 @@ static const struct dmi_system_id bigsmp_dmi_table[] = {
static int probe_bigsmp(void)
{
if (def_to_bigsmp)
- dmi_bigsmp = 1;
+ dmi_bigsmp = 1;
else
dmi_check_system(bigsmp_dmi_table);
return dmi_bigsmp;
diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c
new file mode 100644
index 000000000000..8091e68764c4
--- /dev/null
+++ b/arch/x86/mach-generic/numaq.c
@@ -0,0 +1,41 @@
+/*
+ * APIC driver for the IBM NUMAQ chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/mach-numaq/mach_apic.h>
+#include <asm/mach-numaq/mach_apicdef.h>
+#include <asm/mach-numaq/mach_ipi.h>
+#include <asm/mach-numaq/mach_mpparse.h>
+#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq.h>
+
+static int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ numaq_mps_oem_check(mpc, oem, productid);
+ return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+ /* already know from get_memcfg_numaq() */
+ return found_numaq;
+}
+
+/* Hook from generic ACPI tables.c */
+static int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return 0;
+}
+
+struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index c5ae751b994a..ba18dec48555 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -16,6 +16,7 @@
#include <asm/apicdef.h>
#include <asm/genapic.h>
+extern struct genapic apic_numaq;
extern struct genapic apic_summit;
extern struct genapic apic_bigsmp;
extern struct genapic apic_es7000;
@@ -24,9 +25,18 @@ extern struct genapic apic_default;
struct genapic *genapic = &apic_default;
static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+ &apic_numaq,
+#endif
+#ifdef CONFIG_X86_SUMMIT
&apic_summit,
+#endif
+#ifdef CONFIG_X86_BIGSMP
&apic_bigsmp,
+#endif
+#ifdef CONFIG_X86_ES7000
&apic_es7000,
+#endif
&apic_default, /* must be last */
NULL,
};
@@ -54,6 +64,7 @@ early_param("apic", parse_apic);
void __init generic_bigsmp_probe(void)
{
+#if CONFIG_X86_BIGSMP
/*
* This routine is used to switch to bigsmp mode when
* - There is no apic= option specified by the user
@@ -67,6 +78,7 @@ void __init generic_bigsmp_probe(void)
printk(KERN_INFO "Overriding APIC driver with %s\n",
genapic->name);
}
+#endif
}
void __init generic_apic_probe(void)
@@ -88,7 +100,8 @@ void __init generic_apic_probe(void)
/* These functions can switch the APIC even after the initial ->probe() */
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
{
int i;
for (i = 0; apic_probe[i]; ++i) {
diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c
index 57484e91ab90..a2fb78c0d154 100644
--- a/arch/x86/mach-visws/mpparse.c
+++ b/arch/x86/mach-visws/mpparse.c
@@ -8,11 +8,6 @@
#include "cobalt.h"
#include "mach_apic.h"
-/* Have we found an MP table */
-int smp_found_config;
-
-int pic_mode;
-
extern unsigned int __cpuinitdata maxcpus;
/*
@@ -76,7 +71,9 @@ void __init find_smp_config(void)
if (ncpus > maxcpus)
ncpus = maxcpus;
+#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 1;
+#endif
while (ncpus--)
MP_processor_info(mp++);
diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
index 5ae5466b9eb9..f4aca9fa9546 100644
--- a/arch/x86/mach-voyager/setup.c
+++ b/arch/x86/mach-voyager/setup.c
@@ -62,6 +62,7 @@ void __init time_init_hook(void)
char *__init machine_specific_memory_setup(void)
{
char *who;
+ int new_nr;
who = "NOT VOYAGER";
@@ -111,7 +112,11 @@ char *__init machine_specific_memory_setup(void)
* Otherwise fake a memory map; one section from 0k->640k,
* the next section from 1mb->appropriate_mem_k
*/
- sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
+ new_nr = boot_params.e820_entries;
+ sanitize_e820_map(boot_params.e820_map,
+ ARRAY_SIZE(boot_params.e820_map),
+ &new_nr);
+ boot_params.e820_entries = new_nr;
if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries)
< 0) {
unsigned long mem_size;
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 8acbf0cdf1a5..8dedd01e909f 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -59,11 +59,6 @@ __u32 voyager_quad_processors = 0;
* activity count. Finally exported by i386_ksyms.c */
static int voyager_extended_cpus = 1;
-/* Have we found an SMP box - used by time.c to do the profiling
- interrupt for timeslicing; do not set to 1 until the per CPU timer
- interrupt is active */
-int smp_found_config = 0;
-
/* Used for the invalidate map that's also checked in the spinlock */
static volatile unsigned long smp_invalidate_needed;
@@ -1137,15 +1132,6 @@ void flush_tlb_all(void)
on_each_cpu(do_flush_tlb_all, 0, 1, 1);
}
-/* used to set up the trampoline for other CPUs when the memory manager
- * is sorted out */
-void __init smp_alloc_memory(void)
-{
- trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
- if (__pa(trampoline_base) >= 0x93000)
- BUG();
-}
-
/* send a reschedule CPI to one CPU by physical CPU number*/
static void voyager_smp_send_reschedule(int cpu)
{
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 914ccf983687..accc7c6c57fc 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -38,6 +38,7 @@
#include <asm/setup.h>
#include <asm/mmzone.h>
#include <asm/bios_ebda.h>
+#include <asm/proto.h>
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
@@ -59,14 +60,14 @@ unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
/*
* 4) physnode_map - the mapping between a pfn and owning node
* physnode_map keeps track of the physical memory layout of a generic
- * numa node on a 256Mb break (each element of the array will
- * represent 256Mb of memory and will be marked by the node id. so,
+ * numa node on a 64Mb break (each element of the array will
+ * represent 64Mb of memory and will be marked by the node id. so,
* if the first gig is on node 0, and the second gig is on node 1
* physnode_map will contain:
*
- * physnode_map[0-3] = 0;
- * physnode_map[4-7] = 1;
- * physnode_map[8- ] = -1;
+ * physnode_map[0-15] = 0;
+ * physnode_map[16-31] = 1;
+ * physnode_map[32- ] = -1;
*/
s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
EXPORT_SYMBOL(physnode_map);
@@ -81,9 +82,9 @@ void memory_present(int nid, unsigned long start, unsigned long end)
printk(KERN_DEBUG " ");
for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
- printk("%ld ", pfn);
+ printk(KERN_CONT "%ld ", pfn);
}
- printk("\n");
+ printk(KERN_CONT "\n");
}
unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
@@ -119,11 +120,11 @@ int __init get_memcfg_numa_flat(void)
{
printk("NUMA - single node, flat memory mode\n");
- /* Run the memory configuration and find the top of memory. */
- propagate_e820_map();
node_start_pfn[0] = 0;
node_end_pfn[0] = max_pfn;
+ e820_register_active_regions(0, 0, max_pfn);
memory_present(0, 0, max_pfn);
+ node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
/* Indicate there is one node available. */
nodes_clear(node_online_map);
@@ -159,9 +160,17 @@ static void __init allocate_pgdat(int nid)
if (nid && node_has_online_mem(nid))
NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
else {
- NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn));
- min_low_pfn += PFN_UP(sizeof(pg_data_t));
+ unsigned long pgdat_phys;
+ pgdat_phys = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+ (nid ? max_low_pfn:max_pfn_mapped)<<PAGE_SHIFT,
+ sizeof(pg_data_t),
+ PAGE_SIZE);
+ NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
+ reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t),
+ "NODE_DATA");
}
+ printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
+ nid, (unsigned long)NODE_DATA(nid));
}
#ifdef CONFIG_DISCONTIGMEM
@@ -202,8 +211,12 @@ void __init remap_numa_kva(void)
int node;
for_each_online_node(node) {
+ printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
+ printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
+ (unsigned long)vaddr,
+ node_remap_start_pfn[node] + pfn);
set_pmd_pfn((ulong) vaddr,
node_remap_start_pfn[node] + pfn,
PAGE_KERNEL_LARGE);
@@ -215,17 +228,21 @@ static unsigned long calculate_numa_remap_pages(void)
{
int nid;
unsigned long size, reserve_pages = 0;
- unsigned long pfn;
for_each_online_node(nid) {
- unsigned old_end_pfn = node_end_pfn[nid];
+ u64 node_end_target;
+ u64 node_end_final;
/*
* The acpi/srat node info can show hot-add memroy zones
* where memory could be added but not currently present.
*/
+ printk("node %d pfn: [%lx - %lx]\n",
+ nid, node_start_pfn[nid], node_end_pfn[nid]);
if (node_start_pfn[nid] > max_pfn)
continue;
+ if (!node_end_pfn[nid])
+ continue;
if (node_end_pfn[nid] > max_pfn)
node_end_pfn[nid] = max_pfn;
@@ -237,39 +254,42 @@ static unsigned long calculate_numa_remap_pages(void)
/* now the roundup is correct, convert to PAGE_SIZE pages */
size = size * PTRS_PER_PTE;
- /*
- * Validate the region we are allocating only contains valid
- * pages.
- */
- for (pfn = node_end_pfn[nid] - size;
- pfn < node_end_pfn[nid]; pfn++)
- if (!page_is_ram(pfn))
- break;
-
- if (pfn != node_end_pfn[nid])
- size = 0;
+ node_end_target = round_down(node_end_pfn[nid] - size,
+ PTRS_PER_PTE);
+ node_end_target <<= PAGE_SHIFT;
+ do {
+ node_end_final = find_e820_area(node_end_target,
+ ((u64)node_end_pfn[nid])<<PAGE_SHIFT,
+ ((u64)size)<<PAGE_SHIFT,
+ LARGE_PAGE_BYTES);
+ node_end_target -= LARGE_PAGE_BYTES;
+ } while (node_end_final == -1ULL &&
+ (node_end_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
+
+ if (node_end_final == -1ULL)
+ panic("Can not get kva ram\n");
printk("Reserving %ld pages of KVA for lmem_map of node %d\n",
size, nid);
node_remap_size[nid] = size;
node_remap_offset[nid] = reserve_pages;
reserve_pages += size;
- printk("Shrinking node %d from %ld pages to %ld pages\n",
- nid, node_end_pfn[nid], node_end_pfn[nid] - size);
-
- if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) {
- /*
- * Align node_end_pfn[] and node_remap_start_pfn[] to
- * pmd boundary. remap_numa_kva will barf otherwise.
- */
- printk("Shrinking node %d further by %ld pages for proper alignment\n",
- nid, node_end_pfn[nid] & (PTRS_PER_PTE-1));
- size += node_end_pfn[nid] & (PTRS_PER_PTE-1);
- }
+ printk("Shrinking node %d from %ld pages to %lld pages\n",
+ nid, node_end_pfn[nid], node_end_final>>PAGE_SHIFT);
- node_end_pfn[nid] -= size;
+ /*
+ * prevent kva address below max_low_pfn want it on system
+ * with less memory later.
+ * layout will be: KVA address , KVA RAM
+ */
+ if ((node_end_final>>PAGE_SHIFT) < max_low_pfn)
+ reserve_early(node_end_final,
+ node_end_final+(((u64)size)<<PAGE_SHIFT),
+ "KVA RAM");
+
+ node_end_pfn[nid] = node_end_final>>PAGE_SHIFT;
node_remap_start_pfn[nid] = node_end_pfn[nid];
- shrink_active_range(nid, old_end_pfn, node_end_pfn[nid]);
+ shrink_active_range(nid, node_end_pfn[nid]);
}
printk("Reserving total of %ld pages for numa KVA remap\n",
reserve_pages);
@@ -287,8 +307,7 @@ static void init_remap_allocator(int nid)
printk ("node %d will remap to vaddr %08lx - %08lx\n", nid,
(ulong) node_remap_start_vaddr[nid],
- (ulong) pfn_to_kaddr(highstart_pfn
- + node_remap_offset[nid] + node_remap_size[nid]));
+ (ulong) node_remap_end_vaddr[nid]);
}
#else
void *alloc_remap(int nid, unsigned long size)
@@ -315,7 +334,7 @@ unsigned long __init setup_memory(void)
{
int nid;
unsigned long system_start_pfn, system_max_low_pfn;
- unsigned long wasted_pages;
+ long kva_target_pfn;
/*
* When mapping a NUMA machine we allocate the node_mem_map arrays
@@ -324,34 +343,38 @@ unsigned long __init setup_memory(void)
* this space and use it to adjust the boundary between ZONE_NORMAL
* and ZONE_HIGHMEM.
*/
+
+ /* call find_max_low_pfn at first, it could update max_pfn */
+ system_max_low_pfn = max_low_pfn = find_max_low_pfn();
+
+ remove_all_active_ranges();
get_memcfg_numa();
- kva_pages = calculate_numa_remap_pages();
+ kva_pages = round_up(calculate_numa_remap_pages(), PTRS_PER_PTE);
/* partially used pages are not usable - thus round upwards */
system_start_pfn = min_low_pfn = PFN_UP(init_pg_tables_end);
- kva_start_pfn = find_max_low_pfn() - kva_pages;
+ kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
+ do {
+ kva_start_pfn = find_e820_area(kva_target_pfn<<PAGE_SHIFT,
+ max_low_pfn<<PAGE_SHIFT,
+ kva_pages<<PAGE_SHIFT,
+ PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
+ kva_target_pfn -= PTRS_PER_PTE;
+ } while (kva_start_pfn == -1UL && kva_target_pfn > min_low_pfn);
-#ifdef CONFIG_BLK_DEV_INITRD
- /* Numa kva area is below the initrd */
- if (initrd_start)
- kva_start_pfn = PFN_DOWN(initrd_start - PAGE_OFFSET)
- - kva_pages;
-#endif
+ if (kva_start_pfn == -1UL)
+ panic("Can not get kva space\n");
- /*
- * We waste pages past at the end of the KVA for no good reason other
- * than how it is located. This is bad.
- */
- wasted_pages = kva_start_pfn & (PTRS_PER_PTE-1);
- kva_start_pfn -= wasted_pages;
- kva_pages += wasted_pages;
-
- system_max_low_pfn = max_low_pfn = find_max_low_pfn();
printk("kva_start_pfn ~ %ld find_max_low_pfn() ~ %ld\n",
kva_start_pfn, max_low_pfn);
printk("max_pfn = %ld\n", max_pfn);
+
+ /* avoid clash with initrd */
+ reserve_early(kva_start_pfn<<PAGE_SHIFT,
+ (kva_start_pfn + kva_pages)<<PAGE_SHIFT,
+ "KVA PG");
#ifdef CONFIG_HIGHMEM
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > system_max_low_pfn)
@@ -387,16 +410,8 @@ unsigned long __init setup_memory(void)
return max_low_pfn;
}
-void __init numa_kva_reserve(void)
-{
- if (kva_pages)
- reserve_bootmem(PFN_PHYS(kva_start_pfn), PFN_PHYS(kva_pages),
- BOOTMEM_DEFAULT);
-}
-
void __init zone_sizes_init(void)
{
- int nid;
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
max_zone_pfns[ZONE_DMA] =
@@ -406,15 +421,6 @@ void __init zone_sizes_init(void)
max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
#endif
- /* If SRAT has not registered memory, register it now */
- if (find_max_pfn_with_active_regions() == 0) {
- for_each_online_node(nid) {
- if (node_has_online_mem(nid))
- add_active_range(nid, node_start_pfn[nid],
- node_end_pfn[nid]);
- }
- }
-
free_area_init_nodes(max_zone_pfns);
return;
}
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index ec30d10154b6..0e7bb5e81670 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -289,7 +289,8 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base)
void __init add_one_highpage_init(struct page *page, int pfn, int bad_ppro)
{
- if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) {
+ if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn)) &&
+ !page_is_reserved_early(pfn)) {
ClearPageReserved(page);
init_page_count(page);
__free_page(page);
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index c5066d519e5d..afb07ffb931d 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -233,7 +233,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
else
bootmap_start = round_up(start, PAGE_SIZE);
/*
- * SMP_CAHCE_BYTES could be enough, but init_bootmem_node like
+ * SMP_CACHE_BYTES could be enough, but init_bootmem_node like
* to use that to align to PAGE_SIZE
*/
bootmap = early_node_mem(nodeid, bootmap_start, end,
diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32
index 89ec35d00efd..962d96c0495a 100644
--- a/arch/x86/pci/Makefile_32
+++ b/arch/x86/pci/Makefile_32
@@ -13,10 +13,11 @@ pci-y := fixup.o
pci-$(CONFIG_ACPI) += acpi.o
pci-y += legacy.o irq.o
-# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
+# Careful: VISWS overrule the pci-y above. The colons are
# therefor correct. This needs a proper fix by distangling the code.
pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
+
+pci-$(CONFIG_X86_NUMAQ) += numa.o
# Necessary for NUMAQ as well
pci-$(CONFIG_NUMA) += mp_bus_to_node.o
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c
index 5c2799c20e47..bfefdf0f40d4 100644
--- a/arch/x86/pci/k8-bus_64.c
+++ b/arch/x86/pci/k8-bus_64.c
@@ -384,7 +384,7 @@ static int __init early_fill_mp_bus_info(void)
/* need to take out [0, TOM) for RAM*/
address = MSR_K8_TOP_MEM1;
rdmsrl(address, val);
- end = (val & 0xffffff8000000ULL);
+ end = (val & 0xffffff800000ULL);
printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
if (end < (1ULL<<32))
update_range(range, 0, end - 1);
@@ -478,7 +478,7 @@ static int __init early_fill_mp_bus_info(void)
/* TOP_MEM2 */
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
- end = (val & 0xffffff8000000ULL);
+ end = (val & 0xffffff800000ULL);
printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
update_range(range, 1ULL<<32, end - 1);
}
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c
index d9afbae5092b..99f1ecd485b5 100644
--- a/arch/x86/pci/numa.c
+++ b/arch/x86/pci/numa.c
@@ -6,45 +6,21 @@
#include <linux/init.h>
#include <linux/nodemask.h>
#include <mach_apic.h>
+#include <asm/mpspec.h>
#include "pci.h"
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
-int mp_bus_id_to_node[MAX_MP_BUSSES];
#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-int mp_bus_id_to_local[MAX_MP_BUSSES];
#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- mp_bus_id_to_node[m->mpc_busid] = quad;
- mp_bus_id_to_local[m->mpc_busid] = local;
- printk(KERN_INFO "Bus #%d is %s (node %d)\n",
- m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
EXPORT_SYMBOL(xquad_portio);
-#endif
#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
@@ -179,6 +155,9 @@ static int __init pci_numa_init(void)
{
int quad;
+ if (!found_numaq)
+ return 0;
+
raw_pci_ops = &pci_direct_conf1_mq;
if (pcibios_scanned++)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index f09c1c69c37a..275163f81464 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1196,6 +1196,7 @@ asmlinkage void __init xen_start_kernel(void)
pgd = (pgd_t *)xen_start_info->pt_base;
+ init_pg_tables_start = __pa(pgd);
init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
init_mm.pgd = pgd; /* use the Xen pagetables to start */
@@ -1236,5 +1237,5 @@ asmlinkage void __init xen_start_kernel(void)
add_preferred_console("hvc", 0, NULL);
/* Start the world */
- start_kernel();
+ i386_start_kernel();
}
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index c52fca833268..860f15f36ce9 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -4,7 +4,6 @@
menuconfig ACPI
bool "ACPI (Advanced Configuration and Power Interface) Support"
- depends on !X86_NUMAQ
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 89022a74faee..e556f30c7c16 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -570,6 +570,11 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
(triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
(polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
+#ifdef CONFIG_X86
+ mp_config_acpi_gsi(dev->bus->number, dev->devfn, dev->pin, irq,
+ triggering, polarity);
+#endif
+
return 0;
}
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index c5e3ed7e903b..455575be3560 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -8,6 +8,11 @@
#include <linux/slab.h>
#include <asm/dmi.h>
+/*
+ * DMI stands for "Desktop Management Interface". It is part
+ * of and an antecedent to, SMBIOS, which stands for System
+ * Management BIOS. See further: http://www.dmtf.org/standards
+ */
static char dmi_empty_string[] = " ";
static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
index 14411c9de46f..73ce5b32443f 100644
--- a/include/asm-x86/acpi.h
+++ b/include/asm-x86/acpi.h
@@ -28,6 +28,7 @@
#include <asm/numa.h>
#include <asm/processor.h>
#include <asm/mmu.h>
+#include <asm/mpspec.h>
#define COMPILER_DEPENDENT_INT64 long long
#define COMPILER_DEPENDENT_UINT64 unsigned long long
diff --git a/include/asm-x86/bios_ebda.h b/include/asm-x86/bios_ebda.h
index b4a46b7be794..0033e50c13b2 100644
--- a/include/asm-x86/bios_ebda.h
+++ b/include/asm-x86/bios_ebda.h
@@ -14,4 +14,6 @@ static inline unsigned int get_bios_ebda(void)
return address; /* 0 means none */
}
+void reserve_ebda_region(void);
+
#endif /* _MACH_BIOS_EBDA_H */
diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h
index f62f4733606b..0a073904168b 100644
--- a/include/asm-x86/bootparam.h
+++ b/include/asm-x86/bootparam.h
@@ -106,4 +106,7 @@ struct boot_params {
__u8 _pad9[276]; /* 0xeec */
} __attribute__((packed));
+void reserve_setup_data(void);
+void parse_setup_data(void);
+
#endif /* _ASM_BOOTPARAM_H */
diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h
index 7004251fc66b..8aa32323a182 100644
--- a/include/asm-x86/e820.h
+++ b/include/asm-x86/e820.h
@@ -2,6 +2,41 @@
#define __ASM_E820_H
#define E820MAP 0x2d0 /* our map */
#define E820MAX 128 /* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage. If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes. Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates. The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries. Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+/*
+ * Odd: 'make headers_check' complains about numa.h if I try
+ * to collapse the next two #ifdef lines to a single line:
+ * #if defined(__KERNEL__) && defined(CONFIG_EFI)
+ */
+#ifdef __KERNEL__
+#ifdef CONFIG_EFI
+#include <linux/numa.h>
+#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
+#else /* ! CONFIG_EFI */
+#define E820_X_MAX E820MAX
+#endif
+#else /* ! __KERNEL__ */
+#define E820_X_MAX E820MAX
+#endif
+
#define E820NR 0x1e8 /* # entries in E820MAP */
#define E820_RAM 1
@@ -18,8 +53,51 @@ struct e820entry {
struct e820map {
__u32 nr_map;
- struct e820entry map[E820MAX];
+ struct e820entry map[E820_X_MAX];
};
+
+extern struct e820map e820;
+
+extern int e820_any_mapped(u64 start, u64 end, unsigned type);
+extern int e820_all_mapped(u64 start, u64 end, unsigned type);
+extern void add_memory_region(u64 start, u64 size, int type);
+extern void e820_print_map(char *who);
+extern int
+sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map);
+extern int copy_e820_map(struct e820entry *biosmap, int nr_map);
+extern u64 update_memory_range(u64 start, u64 size, unsigned old_type,
+ unsigned new_type);
+extern void update_e820(void);
+extern void e820_setup_gap(void);
+
+#if defined(CONFIG_X86_64) || \
+ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION))
+extern void e820_mark_nosave_regions(unsigned long limit_pfn);
+#else
+static inline void e820_mark_nosave_regions(unsigned long limit_pfn)
+{
+}
+#endif
+
+extern unsigned long end_user_pfn;
+
+extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align);
+extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align);
+extern void reserve_early(u64 start, u64 end, char *name);
+extern void free_early(u64 start, u64 end);
+extern void early_res_to_bootmem(u64 start, u64 end);
+extern int page_is_reserved_early(unsigned long pagenr);
+extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
+
+extern unsigned long e820_end_of_ram(void);
+extern int e820_find_active_region(const struct e820entry *ei,
+ unsigned long start_pfn,
+ unsigned long last_pfn,
+ unsigned long *ei_startpfn,
+ unsigned long *ei_endpfn);
+extern void e820_register_active_regions(int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
+extern u64 e820_hole_size(u64 start, u64 end);
#endif /* __ASSEMBLY__ */
#define ISA_START_ADDRESS 0xa0000
diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h
index a9f7c6ec32bf..212b74c10efc 100644
--- a/include/asm-x86/e820_32.h
+++ b/include/asm-x86/e820_32.h
@@ -18,33 +18,13 @@
#ifndef __ASSEMBLY__
-extern struct e820map e820;
-extern void update_e820(void);
+extern void setup_memory_map(void);
+extern void finish_e820_parsing(void);
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_any_mapped(u64 start, u64 end, unsigned type);
-extern void propagate_e820_map(void);
-extern void register_bootmem_low_pages(unsigned long max_low_pfn);
-extern void add_memory_region(unsigned long long start,
- unsigned long long size, int type);
-extern void update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
-extern void e820_register_memory(void);
extern void limit_regions(unsigned long long size);
-extern void print_memory_map(char *who);
extern void init_iomem_resources(struct resource *code_resource,
struct resource *data_resource,
struct resource *bss_resource);
-#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
-extern void e820_mark_nosave_regions(void);
-#else
-static inline void e820_mark_nosave_regions(void)
-{
-}
-#endif
-
-
#endif/*!__ASSEMBLY__*/
#endif/*__E820_HEADER*/
diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h
index 71c4d685d30d..368585daaa42 100644
--- a/include/asm-x86/e820_64.h
+++ b/include/asm-x86/e820_64.h
@@ -14,43 +14,16 @@
#include <linux/ioport.h>
#ifndef __ASSEMBLY__
-extern unsigned long find_e820_area(unsigned long start, unsigned long end,
- unsigned long size, unsigned long align);
-extern unsigned long find_e820_area_size(unsigned long start,
- unsigned long *sizep,
- unsigned long align);
-extern void add_memory_region(unsigned long start, unsigned long size,
- int type);
-extern void update_memory_range(u64 start, u64 size, unsigned old_type,
- unsigned new_type);
extern void setup_memory_region(void);
extern void contig_e820_setup(void);
-extern unsigned long e820_end_of_ram(void);
extern void e820_reserve_resources(void);
-extern void e820_mark_nosave_regions(void);
-extern int e820_any_mapped(unsigned long start, unsigned long end,
- unsigned type);
-extern int e820_all_mapped(unsigned long start, unsigned long end,
- unsigned type);
extern int e820_any_non_reserved(unsigned long start, unsigned long end);
extern int is_memory_any_valid(unsigned long start, unsigned long end);
extern int e820_all_non_reserved(unsigned long start, unsigned long end);
extern int is_memory_all_valid(unsigned long start, unsigned long end);
-extern unsigned long e820_hole_size(unsigned long start, unsigned long end);
-
-extern void e820_setup_gap(void);
-extern void e820_register_active_regions(int nid, unsigned long start_pfn,
- unsigned long end_pfn);
extern void finish_e820_parsing(void);
-extern struct e820map e820;
-extern void update_e820(void);
-
-extern void reserve_early(unsigned long start, unsigned long end, char *name);
-extern void free_early(unsigned long start, unsigned long end);
-extern void early_res_to_bootmem(unsigned long start, unsigned long end);
-
#endif/*!__ASSEMBLY__*/
#endif/*__E820_HEADER*/
diff --git a/include/asm-x86/efi.h b/include/asm-x86/efi.h
index d53004b855cc..7ed2bd7a7f51 100644
--- a/include/asm-x86/efi.h
+++ b/include/asm-x86/efi.h
@@ -90,7 +90,7 @@ extern void *efi_ioremap(unsigned long addr, unsigned long size);
#endif /* CONFIG_X86_32 */
-extern void efi_reserve_bootmem(void);
+extern void efi_reserve_early(void);
extern void efi_call_phys_prelog(void);
extern void efi_call_phys_epilog(void);
diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h
index d593e14f0341..86d8c3bdcca4 100644
--- a/include/asm-x86/io_apic.h
+++ b/include/asm-x86/io_apic.h
@@ -112,21 +112,32 @@ extern int nr_ioapic_registers[MAX_IO_APICS];
#define MP_MAX_IOAPIC_PIN 127
-struct mp_ioapic_routing {
- int apic_id;
- int gsi_base;
- int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+struct mp_config_ioapic {
+ unsigned long mp_apicaddr;
+ unsigned int mp_apicid;
+ unsigned char mp_type;
+ unsigned char mp_apicver;
+ unsigned char mp_flags;
+};
+
+struct mp_config_intsrc {
+ unsigned int mp_dstapic;
+ unsigned char mp_type;
+ unsigned char mp_irqtype;
+ unsigned short mp_irqflag;
+ unsigned char mp_srcbus;
+ unsigned char mp_srcbusirq;
+ unsigned char mp_dstirq;
};
/* I/O APIC entries */
-extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS];
/* # of MP IRQ source entries */
extern int mp_irq_entries;
/* MP IRQ source entries */
-extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* non-0 if default (table-less) MP configuration */
extern int mpc_default_type;
diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h
index ecc80f341f37..196d63c28aa4 100644
--- a/include/asm-x86/ipi.h
+++ b/include/asm-x86/ipi.h
@@ -20,6 +20,7 @@
#include <asm/hw_irq.h>
#include <asm/apic.h>
+#include <asm/smp.h>
/*
* the following functions deal with sending IPIs between CPUs.
diff --git a/include/asm-x86/mach-generic/mach_mpparse.h b/include/asm-x86/mach-generic/mach_mpparse.h
index 0d0b5ba2e9d1..586cadbf3787 100644
--- a/include/asm-x86/mach-generic/mach_mpparse.h
+++ b/include/asm-x86/mach-generic/mach_mpparse.h
@@ -1,7 +1,10 @@
#ifndef _MACH_MPPARSE_H
#define _MACH_MPPARSE_H 1
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid);
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
#endif
diff --git a/include/asm-x86/mach-numaq/mach_apic.h b/include/asm-x86/mach-numaq/mach_apic.h
index 75a56e5afbe7..d802465e026a 100644
--- a/include/asm-x86/mach-numaq/mach_apic.h
+++ b/include/asm-x86/mach-numaq/mach_apic.h
@@ -20,8 +20,14 @@ static inline cpumask_t target_cpus(void)
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
#define apicid_cluster(apicid) (apicid & 0xF0)
static inline int apic_id_registered(void)
@@ -77,11 +83,6 @@ static inline int cpu_present_to_apicid(int mps_cpu)
return BAD_APICID;
}
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
- return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
static inline int apicid_to_node(int logical_apicid)
{
return logical_apicid >> 4;
@@ -95,30 +96,6 @@ static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
return physid_mask_of_physid(cpu + 4*node);
}
-struct mpc_config_translation {
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- int quad = translation_record->trans_quad;
- int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
- printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver, quad, logical_apicid);
- return logical_apicid;
-}
-
extern void *xquad_portio;
static inline void setup_portio_remap(void)
diff --git a/include/asm-x86/mach-numaq/mach_mpparse.h b/include/asm-x86/mach-numaq/mach_mpparse.h
index 459b12401187..626aef6b155f 100644
--- a/include/asm-x86/mach-numaq/mach_mpparse.h
+++ b/include/asm-x86/mach-numaq/mach_mpparse.h
@@ -1,14 +1,7 @@
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h
index cb2cad0b65a7..b2298a227567 100644
--- a/include/asm-x86/mmzone_32.h
+++ b/include/asm-x86/mmzone_32.h
@@ -12,11 +12,9 @@
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
-#ifdef CONFIG_X86_NUMAQ
- #include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
- #include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
extern int get_memcfg_numa_flat(void);
/*
@@ -26,28 +24,20 @@ extern int get_memcfg_numa_flat(void);
*/
static inline void get_memcfg_numa(void)
{
-#ifdef CONFIG_X86_NUMAQ
+
if (get_memcfg_numaq())
return;
-#elif defined(CONFIG_ACPI_SRAT)
if (get_memcfg_from_srat())
return;
-#endif
-
get_memcfg_numa_flat();
}
extern int early_pfn_to_nid(unsigned long pfn);
-extern void numa_kva_reserve(void);
#else /* !CONFIG_NUMA */
#define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
-static inline void numa_kva_reserve(void)
-{
-}
#endif /* CONFIG_NUMA */
#ifdef CONFIG_DISCONTIGMEM
@@ -55,14 +45,14 @@ static inline void numa_kva_reserve(void)
/*
* generic node memory support, the following assumptions apply:
*
- * 1) memory comes in 256Mb contigious chunks which are either present or not
+ * 1) memory comes in 64Mb contigious chunks which are either present or not
* 2) we will not have more than 64Gb in total
*
* for now assume that 64Gb is max amount of RAM for whole system
* 64Gb / 4096bytes/page = 16777216 pages
*/
#define MAX_NR_PAGES 16777216
-#define MAX_ELEMENTS 256
+#define MAX_ELEMENTS 1024
#define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS)
extern s8 physnode_map[];
@@ -87,9 +77,6 @@ static inline int pfn_to_nid(unsigned long pfn)
__pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
})
-#ifdef CONFIG_X86_NUMAQ /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn) ((pfn) < num_physpages)
-#else
static inline int pfn_valid(int pfn)
{
int nid = pfn_to_nid(pfn);
@@ -98,7 +85,6 @@ static inline int pfn_valid(int pfn)
return (pfn < node_end_pfn(nid));
return 0;
}
-#endif /* CONFIG_X86_NUMAQ */
#endif /* CONFIG_DISCONTIGMEM */
diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h
index 57a991b9c053..b8ba37496e2d 100644
--- a/include/asm-x86/mpspec.h
+++ b/include/asm-x86/mpspec.h
@@ -13,6 +13,12 @@ extern int apic_version[MAX_APICS];
extern u8 apicid_2_node[];
extern int pic_mode;
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
#define MAX_APICID 256
#else
@@ -21,26 +27,30 @@ extern int pic_mode;
/* Each PCI slot may be a combo card with its own bus. 4 IRQ pins per slot. */
#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
+#endif
+
extern void early_find_smp_config(void);
extern void early_get_smp_config(void);
-#endif
-
#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
extern int mp_bus_id_to_type[MAX_MP_BUSSES];
#endif
extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-extern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES];
-
extern unsigned int boot_cpu_physical_apicid;
+extern unsigned int max_physical_apicid;
extern int smp_found_config;
extern int mpc_default_type;
extern unsigned long mp_lapic_addr;
extern void find_smp_config(void);
extern void get_smp_config(void);
+#ifdef CONFIG_X86_MPPARSE
+extern void early_reserve_e820_mpc_new(void);
+#else
+static inline void early_reserve_e820_mpc_new(void) { }
+#endif
void __cpuinit generic_processor_info(int apicid, int version);
#ifdef CONFIG_ACPI
@@ -49,6 +59,18 @@ extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
u32 gsi);
extern void mp_config_acpi_legacy_irqs(void);
extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+extern void MP_intsrc_info(struct mpc_config_intsrc *m);
+#ifdef CONFIG_X86_IO_APIC
+extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+ u32 gsi, int triggering, int polarity);
+#else
+static inline int
+mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
+ u32 gsi, int triggering, int polarity)
+{
+ return 0;
+}
+#endif
#endif /* CONFIG_ACPI */
#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS)
diff --git a/include/asm-x86/numaq.h b/include/asm-x86/numaq.h
index 94b86c31239a..ef068d2465d6 100644
--- a/include/asm-x86/numaq.h
+++ b/include/asm-x86/numaq.h
@@ -28,6 +28,7 @@
#ifdef CONFIG_X86_NUMAQ
+extern int found_numaq;
extern int get_memcfg_numaq(void);
/*
@@ -156,9 +157,10 @@ struct sys_cfg_data {
struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
};
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
{
- return NULL;
+ return 0;
}
#endif /* CONFIG_X86_NUMAQ */
#endif /* NUMAQ_H */
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
index fa6763af8d26..9e163fc3e984 100644
--- a/include/asm-x86/setup.h
+++ b/include/asm-x86/setup.h
@@ -50,19 +50,14 @@ extern struct boot_params boot_params;
*/
#define LOWMEMSIZE() (0x9f000)
-struct e820entry;
-
char * __init machine_specific_memory_setup(void);
char *memory_setup(void);
-int __init copy_e820_map(struct e820entry *biosmap, int nr_map);
-int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map);
-void __init add_memory_region(unsigned long long start,
- unsigned long long size, int type);
-
-extern unsigned long init_pg_tables_end;
+void __init i386_start_kernel(void);
+extern unsigned long init_pg_tables_start;
+extern unsigned long init_pg_tables_end;
#endif /* __i386__ */
#endif /* _SETUP */
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
index 1ebaa5cd3112..514e52b95cef 100644
--- a/include/asm-x86/smp.h
+++ b/include/asm-x86/smp.h
@@ -201,7 +201,6 @@ extern void cpu_exit_clear(void);
extern void cpu_uninit(void);
#endif
-extern void smp_alloc_memory(void);
extern void lock_ipi_call_lock(void);
extern void unlock_ipi_call_lock(void);
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-x86/srat.h b/include/asm-x86/srat.h
index f4bba131d068..456fe0b5a921 100644
--- a/include/asm-x86/srat.h
+++ b/include/asm-x86/srat.h
@@ -27,11 +27,13 @@
#ifndef _ASM_SRAT_H_
#define _ASM_SRAT_H_
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+ return 0;
+}
+#endif
#endif /* _ASM_SRAT_H_ */
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index a2f04cd79b29..9f7f63ba0042 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -303,7 +303,6 @@ static inline void clflush(volatile void *__p)
void disable_hlt(void);
void enable_hlt(void);
-extern int es7000_plat;
void cpu_idle_wait(void);
extern unsigned long arch_align_stack(unsigned long sp);
diff --git a/include/linux/efi.h b/include/linux/efi.h
index a5f359a7ad0e..807373d467f7 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -287,7 +287,6 @@ efi_guid_unparse(efi_guid_t *guid, char *out)
extern void efi_init (void);
extern void *efi_get_pal_addr (void);
extern void efi_map_pal_code (void);
-extern void efi_map_memmap(void);
extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg);
extern void efi_gettimeofday (struct timespec *ts);
extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */
@@ -295,14 +294,11 @@ extern u64 efi_get_iobase (void);
extern u32 efi_mem_type (unsigned long phys_addr);
extern u64 efi_mem_attributes (unsigned long phys_addr);
extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size);
-extern int efi_mem_attribute_range (unsigned long phys_addr, unsigned long size,
- u64 attr);
extern int __init efi_uart_console_only (void);
extern void efi_initialize_iomem_resources(struct resource *code_resource,
struct resource *data_resource, struct resource *bss_resource);
extern unsigned long efi_get_time(void);
extern int efi_set_rtc_mmss(unsigned long nowtime);
-extern int is_available_memory(efi_memory_desc_t * md);
extern struct efi_memory_map memmap;
/**
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 586a943cab01..ce8e397a61f6 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -998,8 +998,7 @@ extern void free_area_init_node(int nid, pg_data_t *pgdat,
extern void free_area_init_nodes(unsigned long *max_zone_pfn);
extern void add_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
-extern void shrink_active_range(unsigned int nid, unsigned long old_end_pfn,
- unsigned long new_end_pfn);
+extern void shrink_active_range(unsigned int nid, unsigned long new_end_pfn);
extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
extern void remove_all_active_ranges(void);
diff --git a/include/linux/pageblock-flags.h b/include/linux/pageblock-flags.h
index e875905f7b12..e8c06122be36 100644
--- a/include/linux/pageblock-flags.h
+++ b/include/linux/pageblock-flags.h
@@ -25,13 +25,11 @@
#include <linux/types.h>
-/* Macro to aid the definition of ranges of bits */
-#define PB_range(name, required_bits) \
- name, name ## _end = (name + required_bits) - 1
-
/* Bit indices that affect a whole block of pages */
enum pageblock_bits {
- PB_range(PB_migrate, 3), /* 3 bits required for migrate types */
+ PB_migrate,
+ PB_migrate_end = PB_migrate + 3 - 1,
+ /* 3 bits required for migrate types */
NR_PAGEBLOCK_BITS
};
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f32fae3121f0..eee5ba7509c1 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3461,6 +3461,11 @@ void __paginginit free_area_init_node(int nid, struct pglist_data *pgdat,
calculate_node_totalpages(pgdat, zones_size, zholes_size);
alloc_node_mem_map(pgdat);
+#ifdef CONFIG_FLAT_NODE_MEM_MAP
+ printk(KERN_DEBUG "free_area_init_node: node %d, pgdat %08lx, node_mem_map %08lx\n",
+ nid, (unsigned long)pgdat,
+ (unsigned long)pgdat->node_mem_map);
+#endif
free_area_init_core(pgdat, zones_size, zholes_size);
}
@@ -3549,25 +3554,49 @@ void __init add_active_range(unsigned int nid, unsigned long start_pfn,
/**
* shrink_active_range - Shrink an existing registered range of PFNs
* @nid: The node id the range is on that should be shrunk
- * @old_end_pfn: The old end PFN of the range
* @new_end_pfn: The new PFN of the range
*
* i386 with NUMA use alloc_remap() to store a node_mem_map on a local node.
- * The map is kept at the end physical page range that has already been
- * registered with add_active_range(). This function allows an arch to shrink
- * an existing registered range.
+ * The map is kept near the end physical page range that has already been
+ * registered. This function allows an arch to shrink an existing registered
+ * range.
*/
-void __init shrink_active_range(unsigned int nid, unsigned long old_end_pfn,
- unsigned long new_end_pfn)
+void __init shrink_active_range(unsigned int nid, unsigned long new_end_pfn)
{
- int i;
+ int i, j;
+ int removed = 0;
/* Find the old active region end and shrink */
- for_each_active_range_index_in_nid(i, nid)
- if (early_node_map[i].end_pfn == old_end_pfn) {
+ for_each_active_range_index_in_nid(i, nid) {
+ if (early_node_map[i].start_pfn >= new_end_pfn) {
+ /* clear it */
+ early_node_map[i].end_pfn = 0;
+ removed = 1;
+ continue;
+ }
+ if (early_node_map[i].end_pfn > new_end_pfn) {
early_node_map[i].end_pfn = new_end_pfn;
- break;
+ continue;
}
+ }
+
+ if (!removed)
+ return;
+
+ /* remove the blank ones */
+ for (i = nr_nodemap_entries - 1; i > 0; i--) {
+ if (early_node_map[i].nid != nid)
+ continue;
+ if (early_node_map[i].end_pfn)
+ continue;
+ /* we found it, get rid of it */
+ for (j = i; j < nr_nodemap_entries - 1; j++)
+ memcpy(&early_node_map[j], &early_node_map[j+1],
+ sizeof(early_node_map[j]));
+ j = nr_nodemap_entries - 1;
+ memset(&early_node_map[j], 0, sizeof(early_node_map[j]));
+ nr_nodemap_entries--;
+ }
}
/**