summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/arch_timer.txt59
-rw-r--r--Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt17
-rw-r--r--MAINTAINERS10
-rw-r--r--arch/arm/include/asm/arch_timer.h14
-rw-r--r--arch/arm64/include/asm/arch_timer.h23
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/arm_arch_timer.c447
-rw-r--r--drivers/clocksource/cadence_ttc_timer.c13
-rw-r--r--drivers/clocksource/moxart_timer.c165
-rw-r--r--drivers/clocksource/sun4i_timer.c110
-rw-r--r--drivers/clocksource/time-orion.c2
-rw-r--r--include/clocksource/arm_arch_timer.h10
12 files changed, 738 insertions, 133 deletions
diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
index 20746e5abe6f..06fc7602593a 100644
--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -1,10 +1,14 @@
* ARM architected timer
-ARM cores may have a per-core architected timer, which provides per-cpu timers.
+ARM cores may have a per-core architected timer, which provides per-cpu timers,
+or a memory mapped architected timer, which provides up to 8 frames with a
+physical and optional virtual timer per frame.
-The timer is attached to a GIC to deliver its per-processor interrupts.
+The per-core architected timer is attached to a GIC to deliver its
+per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
+to deliver its interrupts via SPIs.
-** Timer node properties:
+** CP15 Timer node properties:
- compatible : Should at least contain one of
"arm,armv7-timer"
@@ -26,3 +30,52 @@ Example:
<1 10 0xf08>;
clock-frequency = <100000000>;
};
+
+** Memory mapped timer node properties:
+
+- compatible : Should at least contain "arm,armv7-timer-mem".
+
+- clock-frequency : The frequency of the main counter, in Hz. Optional.
+
+- reg : The control frame base address.
+
+Note that #address-cells, #size-cells, and ranges shall be present to ensure
+the CPU can address a frame's registers.
+
+A timer node has up to 8 frame sub-nodes, each with the following properties:
+
+- frame-number: 0 to 7.
+
+- interrupts : Interrupt list for physical and virtual timers in that order.
+ The virtual timer interrupt is optional.
+
+- reg : The first and second view base addresses in that order. The second view
+ base address is optional.
+
+- status : "disabled" indicates the frame is not available for use. Optional.
+
+Example:
+
+ timer@f0000000 {
+ compatible = "arm,armv7-timer-mem";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0xf0000000 0x1000>;
+ clock-frequency = <50000000>;
+
+ frame@f0001000 {
+ frame-number = <0>
+ interrupts = <0 13 0x8>,
+ <0 14 0x8>;
+ reg = <0xf0001000 0x1000>,
+ <0xf0002000 0x1000>;
+ };
+
+ frame@f0003000 {
+ frame-number = <1>
+ interrupts = <0 15 0x8>;
+ reg = <0xf0003000 0x1000>;
+ status = "disabled";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt
new file mode 100644
index 000000000000..da2d510cae47
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/moxa,moxart-timer.txt
@@ -0,0 +1,17 @@
+MOXA ART timer
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-timer"
+- reg : Should contain registers location and length
+- interrupts : Should contain the timer interrupt number
+- clocks : Should contain phandle for the clock that drives the counter
+
+Example:
+
+ timer: timer@98400000 {
+ compatible = "moxa,moxart-timer";
+ reg = <0x98400000 0x42>;
+ interrupts = <19 1>;
+ clocks = <&coreclk>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b32bc220d56..79dccf75252c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2125,6 +2125,13 @@ M: Russell King <linux@arm.linux.org.uk>
S: Maintained
F: include/linux/clk.h
+CLOCKSOURCE, CLOCKEVENT DRIVERS
+M: Daniel Lezcano <daniel.lezcano@linaro.org>
+M: Thomas Gleixner <tglx@linutronix.de>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
+S: Supported
+F: drivers/clocksource
+
CISCO FCOE HBA DRIVER
M: Hiral Patel <hiralpat@cisco.com>
M: Suma Ramars <sramars@cisco.com>
@@ -7156,7 +7163,7 @@ S: Maintained
F: include/linux/mmc/dw_mmc.h
F: drivers/mmc/host/dw_mmc*
-TIMEKEEPING, NTP
+TIMEKEEPING, CLOCKSOURCE CORE, NTP
M: John Stultz <john.stultz@linaro.org>
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
@@ -7169,7 +7176,6 @@ F: include/uapi/linux/timex.h
F: kernel/time/clocksource.c
F: kernel/time/time*.c
F: kernel/time/ntp.c
-F: drivers/clocksource
TLG2300 VIDEO4LINUX-2 DRIVER
M: Huang Shijie <shijie8@gmail.com>
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index e406d575c94f..5665134bfa3e 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -17,7 +17,8 @@ int arch_timer_arch_init(void);
* nicely work out which register we want, and chuck away the rest of
* the code. At least it does so with a recent GCC (4.6.3).
*/
-static inline void arch_timer_reg_write(const int access, const int reg, u32 val)
+static __always_inline
+void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val)
{
if (access == ARCH_TIMER_PHYS_ACCESS) {
switch (reg) {
@@ -28,9 +29,7 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val
asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
break;
}
- }
-
- if (access == ARCH_TIMER_VIRT_ACCESS) {
+ } else if (access == ARCH_TIMER_VIRT_ACCESS) {
switch (reg) {
case ARCH_TIMER_REG_CTRL:
asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val));
@@ -44,7 +43,8 @@ static inline void arch_timer_reg_write(const int access, const int reg, u32 val
isb();
}
-static inline u32 arch_timer_reg_read(const int access, const int reg)
+static __always_inline
+u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg)
{
u32 val = 0;
@@ -57,9 +57,7 @@ static inline u32 arch_timer_reg_read(const int access, const int reg)
asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
break;
}
- }
-
- if (access == ARCH_TIMER_VIRT_ACCESS) {
+ } else if (access == ARCH_TIMER_VIRT_ACCESS) {
switch (reg) {
case ARCH_TIMER_REG_CTRL:
asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val));
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index 98abd476992d..c9f1d2816c2b 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -26,7 +26,13 @@
#include <clocksource/arm_arch_timer.h>
-static inline void arch_timer_reg_write(int access, int reg, u32 val)
+/*
+ * These register accessors are marked inline so the compiler can
+ * nicely work out which register we want, and chuck away the rest of
+ * the code.
+ */
+static __always_inline
+void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val)
{
if (access == ARCH_TIMER_PHYS_ACCESS) {
switch (reg) {
@@ -36,8 +42,6 @@ static inline void arch_timer_reg_write(int access, int reg, u32 val)
case ARCH_TIMER_REG_TVAL:
asm volatile("msr cntp_tval_el0, %0" : : "r" (val));
break;
- default:
- BUILD_BUG();
}
} else if (access == ARCH_TIMER_VIRT_ACCESS) {
switch (reg) {
@@ -47,17 +51,14 @@ static inline void arch_timer_reg_write(int access, int reg, u32 val)
case ARCH_TIMER_REG_TVAL:
asm volatile("msr cntv_tval_el0, %0" : : "r" (val));
break;
- default:
- BUILD_BUG();
}
- } else {
- BUILD_BUG();
}
isb();
}
-static inline u32 arch_timer_reg_read(int access, int reg)
+static __always_inline
+u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg)
{
u32 val;
@@ -69,8 +70,6 @@ static inline u32 arch_timer_reg_read(int access, int reg)
case ARCH_TIMER_REG_TVAL:
asm volatile("mrs %0, cntp_tval_el0" : "=r" (val));
break;
- default:
- BUILD_BUG();
}
} else if (access == ARCH_TIMER_VIRT_ACCESS) {
switch (reg) {
@@ -80,11 +79,7 @@ static inline u32 arch_timer_reg_read(int access, int reg)
case ARCH_TIMER_REG_TVAL:
asm volatile("mrs %0, cntv_tval_el0" : "=r" (val));
break;
- default:
- BUILD_BUG();
}
- } else {
- BUILD_BUG();
}
return val;
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 8b00c5cebfa4..704d6d342adc 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ORION_TIMER) += time-orion.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
+obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index ffadd836e0b5..fbd9ccd5e114 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -16,13 +16,39 @@
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/arch_timer.h>
#include <asm/virt.h>
#include <clocksource/arm_arch_timer.h>
+#define CNTTIDR 0x08
+#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))
+
+#define CNTVCT_LO 0x08
+#define CNTVCT_HI 0x0c
+#define CNTFRQ 0x10
+#define CNTP_TVAL 0x28
+#define CNTP_CTL 0x2c
+#define CNTV_TVAL 0x38
+#define CNTV_CTL 0x3c
+
+#define ARCH_CP15_TIMER BIT(0)
+#define ARCH_MEM_TIMER BIT(1)
+static unsigned arch_timers_present __initdata;
+
+static void __iomem *arch_counter_base;
+
+struct arch_timer {
+ void __iomem *base;
+ struct clock_event_device evt;
+};
+
+#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
+
static u32 arch_timer_rate;
enum ppi_nr {
@@ -38,19 +64,83 @@ static int arch_timer_ppi[MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt;
static bool arch_timer_use_virtual = true;
+static bool arch_timer_mem_use_virtual;
/*
* Architected system timer support.
*/
-static inline irqreturn_t timer_handler(const int access,
+static __always_inline
+void arch_timer_reg_write(int access, enum arch_timer_reg reg, u32 val,
+ struct clock_event_device *clk)
+{
+ if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ writel_relaxed(val, timer->base + CNTP_CTL);
+ break;
+ case ARCH_TIMER_REG_TVAL:
+ writel_relaxed(val, timer->base + CNTP_TVAL);
+ break;
+ }
+ } else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ writel_relaxed(val, timer->base + CNTV_CTL);
+ break;
+ case ARCH_TIMER_REG_TVAL:
+ writel_relaxed(val, timer->base + CNTV_TVAL);
+ break;
+ }
+ } else {
+ arch_timer_reg_write_cp15(access, reg, val);
+ }
+}
+
+static __always_inline
+u32 arch_timer_reg_read(int access, enum arch_timer_reg reg,
+ struct clock_event_device *clk)
+{
+ u32 val;
+
+ if (access == ARCH_TIMER_MEM_PHYS_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ val = readl_relaxed(timer->base + CNTP_CTL);
+ break;
+ case ARCH_TIMER_REG_TVAL:
+ val = readl_relaxed(timer->base + CNTP_TVAL);
+ break;
+ }
+ } else if (access == ARCH_TIMER_MEM_VIRT_ACCESS) {
+ struct arch_timer *timer = to_arch_timer(clk);
+ switch (reg) {
+ case ARCH_TIMER_REG_CTRL:
+ val = readl_relaxed(timer->base + CNTV_CTL);
+ break;
+ case ARCH_TIMER_REG_TVAL:
+ val = readl_relaxed(timer->base + CNTV_TVAL);
+ break;
+ }
+ } else {
+ val = arch_timer_reg_read_cp15(access, reg);
+ }
+
+ return val;
+}
+
+static __always_inline irqreturn_t timer_handler(const int access,
struct clock_event_device *evt)
{
unsigned long ctrl;
- ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, evt);
if (ctrl & ARCH_TIMER_CTRL_IT_STAT) {
ctrl |= ARCH_TIMER_CTRL_IT_MASK;
- arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, evt);
evt->event_handler(evt);
return IRQ_HANDLED;
}
@@ -72,15 +162,30 @@ static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id)
return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt);
}
-static inline void timer_set_mode(const int access, int mode)
+static irqreturn_t arch_timer_handler_phys_mem(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_MEM_PHYS_ACCESS, evt);
+}
+
+static irqreturn_t arch_timer_handler_virt_mem(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ return timer_handler(ARCH_TIMER_MEM_VIRT_ACCESS, evt);
+}
+
+static __always_inline void timer_set_mode(const int access, int mode,
+ struct clock_event_device *clk)
{
unsigned long ctrl;
switch (mode) {
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
- ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
- arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
break;
default:
break;
@@ -90,60 +195,108 @@ static inline void timer_set_mode(const int access, int mode)
static void arch_timer_set_mode_virt(enum clock_event_mode mode,
struct clock_event_device *clk)
{
- timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode);
+ timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode, clk);
}
static void arch_timer_set_mode_phys(enum clock_event_mode mode,
struct clock_event_device *clk)
{
- timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode);
+ timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode, clk);
+}
+
+static void arch_timer_set_mode_virt_mem(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ timer_set_mode(ARCH_TIMER_MEM_VIRT_ACCESS, mode, clk);
}
-static inline void set_next_event(const int access, unsigned long evt)
+static void arch_timer_set_mode_phys_mem(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ timer_set_mode(ARCH_TIMER_MEM_PHYS_ACCESS, mode, clk);
+}
+
+static __always_inline void set_next_event(const int access, unsigned long evt,
+ struct clock_event_device *clk)
{
unsigned long ctrl;
- ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL);
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
ctrl |= ARCH_TIMER_CTRL_ENABLE;
ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
- arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt);
- arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl);
+ arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt, clk);
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
}
static int arch_timer_set_next_event_virt(unsigned long evt,
- struct clock_event_device *unused)
+ struct clock_event_device *clk)
{
- set_next_event(ARCH_TIMER_VIRT_ACCESS, evt);
+ set_next_event(ARCH_TIMER_VIRT_ACCESS, evt, clk);
return 0;
}
static int arch_timer_set_next_event_phys(unsigned long evt,
- struct clock_event_device *unused)
+ struct clock_event_device *clk)
{
- set_next_event(ARCH_TIMER_PHYS_ACCESS, evt);
+ set_next_event(ARCH_TIMER_PHYS_ACCESS, evt, clk);
return 0;
}
-static int arch_timer_setup(struct clock_event_device *clk)
+static int arch_timer_set_next_event_virt_mem(unsigned long evt,
+ struct clock_event_device *clk)
{
- clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
- clk->name = "arch_sys_timer";
- clk->rating = 450;
- if (arch_timer_use_virtual) {
- clk->irq = arch_timer_ppi[VIRT_PPI];
- clk->set_mode = arch_timer_set_mode_virt;
- clk->set_next_event = arch_timer_set_next_event_virt;
+ set_next_event(ARCH_TIMER_MEM_VIRT_ACCESS, evt, clk);
+ return 0;
+}
+
+static int arch_timer_set_next_event_phys_mem(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ set_next_event(ARCH_TIMER_MEM_PHYS_ACCESS, evt, clk);
+ return 0;
+}
+
+static void __arch_timer_setup(unsigned type,
+ struct clock_event_device *clk)
+{
+ clk->features = CLOCK_EVT_FEAT_ONESHOT;
+
+ if (type == ARCH_CP15_TIMER) {
+ clk->features |= CLOCK_EVT_FEAT_C3STOP;
+ clk->name = "arch_sys_timer";
+ clk->rating = 450;
+ clk->cpumask = cpumask_of(smp_processor_id());
+ if (arch_timer_use_virtual) {
+ clk->irq = arch_timer_ppi[VIRT_PPI];
+ clk->set_mode = arch_timer_set_mode_virt;
+ clk->set_next_event = arch_timer_set_next_event_virt;
+ } else {
+ clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
+ clk->set_mode = arch_timer_set_mode_phys;
+ clk->set_next_event = arch_timer_set_next_event_phys;
+ }
} else {
- clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
- clk->set_mode = arch_timer_set_mode_phys;
- clk->set_next_event = arch_timer_set_next_event_phys;
+ clk->name = "arch_mem_timer";
+ clk->rating = 400;
+ clk->cpumask = cpu_all_mask;
+ if (arch_timer_mem_use_virtual) {
+ clk->set_mode = arch_timer_set_mode_virt_mem;
+ clk->set_next_event =
+ arch_timer_set_next_event_virt_mem;
+ } else {
+ clk->set_mode = arch_timer_set_mode_phys_mem;
+ clk->set_next_event =
+ arch_timer_set_next_event_phys_mem;
+ }
}
- clk->cpumask = cpumask_of(smp_processor_id());
+ clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, clk);
- clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL);
+ clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
+}
- clockevents_config_and_register(clk, arch_timer_rate,
- 0xf, 0x7fffffff);
+static int arch_timer_setup(struct clock_event_device *clk)
+{
+ __arch_timer_setup(ARCH_CP15_TIMER, clk);
if (arch_timer_use_virtual)
enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0);
@@ -158,27 +311,41 @@ static int arch_timer_setup(struct clock_event_device *clk)
return 0;
}
-static int arch_timer_available(void)
+static void
+arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
{
- u32 freq;
-
- if (arch_timer_rate == 0) {
- freq = arch_timer_get_cntfrq();
-
- /* Check the timer frequency. */
- if (freq == 0) {
- pr_warn("Architected timer frequency not available\n");
- return -EINVAL;
- }
+ /* Who has more than one independent system counter? */
+ if (arch_timer_rate)
+ return;
- arch_timer_rate = freq;
+ /* Try to determine the frequency from the device tree or CNTFRQ */
+ if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
+ if (cntbase)
+ arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
+ else
+ arch_timer_rate = arch_timer_get_cntfrq();
}
- pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n",
+ /* Check the timer frequency. */
+ if (arch_timer_rate == 0)
+ pr_warn("Architected timer frequency not available\n");
+}
+
+static void arch_timer_banner(unsigned type)
+{
+ pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
+ type & ARCH_CP15_TIMER ? "cp15" : "",
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
+ type & ARCH_MEM_TIMER ? "mmio" : "",
(unsigned long)arch_timer_rate / 1000000,
(unsigned long)(arch_timer_rate / 10000) % 100,
- arch_timer_use_virtual ? "virt" : "phys");
- return 0;
+ type & ARCH_CP15_TIMER ?
+ arch_timer_use_virtual ? "virt" : "phys" :
+ "",
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
+ type & ARCH_MEM_TIMER ?
+ arch_timer_mem_use_virtual ? "virt" : "phys" :
+ "");
}
u32 arch_timer_get_rate(void)
@@ -186,19 +353,35 @@ u32 arch_timer_get_rate(void)
return arch_timer_rate;
}
-u64 arch_timer_read_counter(void)
+static u64 arch_counter_get_cntvct_mem(void)
{
- return arch_counter_get_cntvct();
+ u32 vct_lo, vct_hi, tmp_hi;
+
+ do {
+ vct_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
+ vct_lo = readl_relaxed(arch_counter_base + CNTVCT_LO);
+ tmp_hi = readl_relaxed(arch_counter_base + CNTVCT_HI);
+ } while (vct_hi != tmp_hi);
+
+ return ((u64) vct_hi << 32) | vct_lo;
}
+/*
+ * Default to cp15 based access because arm64 uses this function for
+ * sched_clock() before DT is probed and the cp15 method is guaranteed
+ * to exist on arm64. arm doesn't use this before DT is probed so even
+ * if we don't have the cp15 accessors we won't have a problem.
+ */
+u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntvct;
+
static cycle_t arch_counter_read(struct clocksource *cs)
{
- return arch_counter_get_cntvct();
+ return arch_timer_read_counter();
}
static cycle_t arch_counter_read_cc(const struct cyclecounter *cc)
{
- return arch_counter_get_cntvct();
+ return arch_timer_read_counter();
}
static struct clocksource clocksource_counter = {
@@ -221,6 +404,23 @@ struct timecounter *arch_timer_get_timecounter(void)
return &timecounter;
}
+static void __init arch_counter_register(unsigned type)
+{
+ u64 start_count;
+
+ /* Register the CP15 based counter if we have one */
+ if (type & ARCH_CP15_TIMER)
+ arch_timer_read_counter = arch_counter_get_cntvct;
+ else
+ arch_timer_read_counter = arch_counter_get_cntvct_mem;
+
+ start_count = arch_timer_read_counter();
+ clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+ cyclecounter.mult = clocksource_counter.mult;
+ cyclecounter.shift = clocksource_counter.shift;
+ timecounter_init(&timecounter, &cyclecounter, start_count);
+}
+
static void arch_timer_stop(struct clock_event_device *clk)
{
pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
@@ -265,22 +465,12 @@ static int __init arch_timer_register(void)
int err;
int ppi;
- err = arch_timer_available();
- if (err)
- goto out;
-
arch_timer_evt = alloc_percpu(struct clock_event_device);
if (!arch_timer_evt) {
err = -ENOMEM;
goto out;
}
- clocksource_register_hz(&clocksource_counter, arch_timer_rate);
- cyclecounter.mult = clocksource_counter.mult;
- cyclecounter.shift = clocksource_counter.shift;
- timecounter_init(&timecounter, &cyclecounter,
- arch_counter_get_cntvct());
-
if (arch_timer_use_virtual) {
ppi = arch_timer_ppi[VIRT_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_virt,
@@ -331,24 +521,77 @@ out:
return err;
}
+static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
+{
+ int ret;
+ irq_handler_t func;
+ struct arch_timer *t;
+
+ t = kzalloc(sizeof(*t), GFP_KERNEL);
+ if (!t)
+ return -ENOMEM;
+
+ t->base = base;
+ t->evt.irq = irq;
+ __arch_timer_setup(ARCH_MEM_TIMER, &t->evt);
+
+ if (arch_timer_mem_use_virtual)
+ func = arch_timer_handler_virt_mem;
+ else
+ func = arch_timer_handler_phys_mem;
+
+ ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
+ if (ret) {
+ pr_err("arch_timer: Failed to request mem timer irq\n");
+ kfree(t);
+ }
+
+ return ret;
+}
+
+static const struct of_device_id arch_timer_of_match[] __initconst = {
+ { .compatible = "arm,armv7-timer", },
+ { .compatible = "arm,armv8-timer", },
+ {},
+};
+
+static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
+ { .compatible = "arm,armv7-timer-mem", },
+ {},
+};
+
+static void __init arch_timer_common_init(void)
+{
+ unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
+
+ /* Wait until both nodes are probed if we have two timers */
+ if ((arch_timers_present & mask) != mask) {
+ if (of_find_matching_node(NULL, arch_timer_mem_of_match) &&
+ !(arch_timers_present & ARCH_MEM_TIMER))
+ return;
+ if (of_find_matching_node(NULL, arch_timer_of_match) &&
+ !(arch_timers_present & ARCH_CP15_TIMER))
+ return;
+ }
+
+ arch_timer_banner(arch_timers_present);
+ arch_counter_register(arch_timers_present);
+ arch_timer_arch_init();
+}
+
static void __init arch_timer_init(struct device_node *np)
{
- u32 freq;
int i;
- if (arch_timer_get_rate()) {
+ if (arch_timers_present & ARCH_CP15_TIMER) {
pr_warn("arch_timer: multiple nodes in dt, skipping\n");
return;
}
- /* Try to determine the frequency from the device tree or CNTFRQ */
- if (!of_property_read_u32(np, "clock-frequency", &freq))
- arch_timer_rate = freq;
-
+ arch_timers_present |= ARCH_CP15_TIMER;
for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
-
- of_node_put(np);
+ arch_timer_detect_rate(NULL, np);
/*
* If HYP mode is available, we know that the physical timer
@@ -369,7 +612,73 @@ static void __init arch_timer_init(struct device_node *np)
}
arch_timer_register();
- arch_timer_arch_init();
+ arch_timer_common_init();
}
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
+
+static void __init arch_timer_mem_init(struct device_node *np)
+{
+ struct device_node *frame, *best_frame = NULL;
+ void __iomem *cntctlbase, *base;
+ unsigned int irq;
+ u32 cnttidr;
+
+ arch_timers_present |= ARCH_MEM_TIMER;
+ cntctlbase = of_iomap(np, 0);
+ if (!cntctlbase) {
+ pr_err("arch_timer: Can't find CNTCTLBase\n");
+ return;
+ }
+
+ cnttidr = readl_relaxed(cntctlbase + CNTTIDR);
+ iounmap(cntctlbase);
+
+ /*
+ * Try to find a virtual capable frame. Otherwise fall back to a
+ * physical capable frame.
+ */
+ for_each_available_child_of_node(np, frame) {
+ int n;
+
+ if (of_property_read_u32(frame, "frame-number", &n)) {
+ pr_err("arch_timer: Missing frame-number\n");
+ of_node_put(best_frame);
+ of_node_put(frame);
+ return;
+ }
+
+ if (cnttidr & CNTTIDR_VIRT(n)) {
+ of_node_put(best_frame);
+ best_frame = frame;
+ arch_timer_mem_use_virtual = true;
+ break;
+ }
+ of_node_put(best_frame);
+ best_frame = of_node_get(frame);
+ }
+
+ base = arch_counter_base = of_iomap(best_frame, 0);
+ if (!base) {
+ pr_err("arch_timer: Can't map frame's registers\n");
+ of_node_put(best_frame);
+ return;
+ }
+
+ if (arch_timer_mem_use_virtual)
+ irq = irq_of_parse_and_map(best_frame, 1);
+ else
+ irq = irq_of_parse_and_map(best_frame, 0);
+ of_node_put(best_frame);
+ if (!irq) {
+ pr_err("arch_timer: Frame missing %s irq",
+ arch_timer_mem_use_virtual ? "virt" : "phys");
+ return;
+ }
+
+ arch_timer_detect_rate(base, np);
+ arch_timer_mem_register(base, irq);
+ arch_timer_common_init();
+}
+CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
+ arch_timer_mem_init);
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 4cbe28c74631..b2bb3a4bc205 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -21,7 +21,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/slab.h>
-#include <linux/clk-provider.h>
+#include <linux/sched_clock.h>
/*
* This driver configures the 2 16-bit count-up timers as follows:
@@ -95,6 +95,8 @@ struct ttc_timer_clockevent {
#define to_ttc_timer_clkevent(x) \
container_of(x, struct ttc_timer_clockevent, ce)
+static void __iomem *ttc_sched_clock_val_reg;
+
/**
* ttc_set_interval - Set the timer interval value
*
@@ -156,6 +158,11 @@ static cycle_t __ttc_clocksource_read(struct clocksource *cs)
TTC_COUNT_VAL_OFFSET);
}
+static u32 notrace ttc_sched_clock_read(void)
+{
+ return __raw_readl(ttc_sched_clock_val_reg);
+}
+
/**
* ttc_set_next_event - Sets the time interval for next event
*
@@ -297,6 +304,10 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
kfree(ttccs);
return;
}
+
+ ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
+ setup_sched_clock(ttc_sched_clock_read, 16,
+ clk_get_rate(ttccs->ttc.clk) / PRESCALE);
}
static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
new file mode 100644
index 000000000000..5eb2c35932b1
--- /dev/null
+++ b/drivers/clocksource/moxart_timer.c
@@ -0,0 +1,165 @@
+/*
+ * MOXA ART SoCs timer handling.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/bitops.h>
+
+#define TIMER1_BASE 0x00
+#define TIMER2_BASE 0x10
+#define TIMER3_BASE 0x20
+
+#define REG_COUNT 0x0 /* writable */
+#define REG_LOAD 0x4
+#define REG_MATCH1 0x8
+#define REG_MATCH2 0xC
+
+#define TIMER_CR 0x30
+#define TIMER_INTR_STATE 0x34
+#define TIMER_INTR_MASK 0x38
+
+/*
+ * TIMER_CR flags:
+ *
+ * TIMEREG_CR_*_CLOCK 0: PCLK, 1: EXT1CLK
+ * TIMEREG_CR_*_INT overflow interrupt enable bit
+ */
+#define TIMEREG_CR_1_ENABLE BIT(0)
+#define TIMEREG_CR_1_CLOCK BIT(1)
+#define TIMEREG_CR_1_INT BIT(2)
+#define TIMEREG_CR_2_ENABLE BIT(3)
+#define TIMEREG_CR_2_CLOCK BIT(4)
+#define TIMEREG_CR_2_INT BIT(5)
+#define TIMEREG_CR_3_ENABLE BIT(6)
+#define TIMEREG_CR_3_CLOCK BIT(7)
+#define TIMEREG_CR_3_INT BIT(8)
+#define TIMEREG_CR_COUNT_UP BIT(9)
+
+#define TIMER1_ENABLE (TIMEREG_CR_2_ENABLE | TIMEREG_CR_1_ENABLE)
+#define TIMER1_DISABLE (TIMEREG_CR_2_ENABLE)
+
+static void __iomem *base;
+static unsigned int clock_count_per_tick;
+
+static void moxart_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel(TIMER1_DISABLE, base + TIMER_CR);
+ writel(~0, base + TIMER1_BASE + REG_LOAD);
+ break;
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD);
+ writel(TIMER1_ENABLE, base + TIMER_CR);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ writel(TIMER1_DISABLE, base + TIMER_CR);
+ break;
+ }
+}
+
+static int moxart_clkevt_next_event(unsigned long cycles,
+ struct clock_event_device *unused)
+{
+ u32 u;
+
+ writel(TIMER1_DISABLE, base + TIMER_CR);
+
+ u = readl(base + TIMER1_BASE + REG_COUNT) - cycles;
+ writel(u, base + TIMER1_BASE + REG_MATCH1);
+
+ writel(TIMER1_ENABLE, base + TIMER_CR);
+
+ return 0;
+}
+
+static struct clock_event_device moxart_clockevent = {
+ .name = "moxart_timer",
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = moxart_clkevt_mode,
+ .set_next_event = moxart_clkevt_next_event,
+};
+
+static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction moxart_timer_irq = {
+ .name = "moxart-timer",
+ .flags = IRQF_TIMER,
+ .handler = moxart_timer_interrupt,
+ .dev_id = &moxart_clockevent,
+};
+
+static void __init moxart_timer_init(struct device_node *node)
+{
+ int ret, irq;
+ unsigned long pclk;
+ struct clk *clk;
+
+ base = of_iomap(node, 0);
+ if (!base)
+ panic("%s: of_iomap failed\n", node->full_name);
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("%s: irq_of_parse_and_map failed\n", node->full_name);
+
+ ret = setup_irq(irq, &moxart_timer_irq);
+ if (ret)
+ panic("%s: setup_irq failed\n", node->full_name);
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk))
+ panic("%s: of_clk_get failed\n", node->full_name);
+
+ pclk = clk_get_rate(clk);
+
+ if (clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT,
+ "moxart_timer", pclk, 200, 32,
+ clocksource_mmio_readl_down))
+ panic("%s: clocksource_mmio_init failed\n", node->full_name);
+
+ clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
+
+ writel(~0, base + TIMER2_BASE + REG_LOAD);
+ writel(TIMEREG_CR_2_ENABLE, base + TIMER_CR);
+
+ moxart_clockevent.cpumask = cpumask_of(0);
+ moxart_clockevent.irq = irq;
+
+ /*
+ * documentation is not publicly available:
+ * min_delta / max_delta obtained by trial-and-error,
+ * max_delta 0xfffffffe should be ok because count
+ * register size is u32
+ */
+ clockevents_config_and_register(&moxart_clockevent, pclk,
+ 0x4, 0xfffffffe);
+}
+CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init);
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index d4674e78ef35..8ead0258740a 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -19,42 +19,83 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#define TIMER_IRQ_EN_REG 0x00
-#define TIMER_IRQ_EN(val) (1 << val)
+#define TIMER_IRQ_EN(val) BIT(val)
#define TIMER_IRQ_ST_REG 0x04
#define TIMER_CTL_REG(val) (0x10 * val + 0x10)
-#define TIMER_CTL_ENABLE (1 << 0)
-#define TIMER_CTL_AUTORELOAD (1 << 1)
-#define TIMER_CTL_ONESHOT (1 << 7)
-#define TIMER_INTVAL_REG(val) (0x10 * val + 0x14)
-#define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18)
-
-#define TIMER_SCAL 16
+#define TIMER_CTL_ENABLE BIT(0)
+#define TIMER_CTL_RELOAD BIT(1)
+#define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2)
+#define TIMER_CTL_CLK_SRC_OSC24M (1)
+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
+#define TIMER_CTL_ONESHOT BIT(7)
+#define TIMER_INTVAL_REG(val) (0x10 * (val) + 0x14)
+#define TIMER_CNTVAL_REG(val) (0x10 * (val) + 0x18)
static void __iomem *timer_base;
+static u32 ticks_per_jiffy;
+
+/*
+ * When we disable a timer, we need to wait at least for 2 cycles of
+ * the timer source clock. We will use for that the clocksource timer
+ * that is already setup and runs at the same frequency than the other
+ * timers, and we never will be disabled.
+ */
+static void sun4i_clkevt_sync(void)
+{
+ u32 old = readl(timer_base + TIMER_CNTVAL_REG(1));
+
+ while ((old - readl(timer_base + TIMER_CNTVAL_REG(1))) < 3)
+ cpu_relax();
+}
+
+static void sun4i_clkevt_time_stop(u8 timer)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
+ sun4i_clkevt_sync();
+}
+
+static void sun4i_clkevt_time_setup(u8 timer, unsigned long delay)
+{
+ writel(delay, timer_base + TIMER_INTVAL_REG(timer));
+}
+
+static void sun4i_clkevt_time_start(u8 timer, bool periodic)
+{
+ u32 val = readl(timer_base + TIMER_CTL_REG(timer));
+
+ if (periodic)
+ val &= ~TIMER_CTL_ONESHOT;
+ else
+ val |= TIMER_CTL_ONESHOT;
+
+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
+ timer_base + TIMER_CTL_REG(timer));
+}
static void sun4i_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
- u32 u = readl(timer_base + TIMER_CTL_REG(0));
-
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- u &= ~(TIMER_CTL_ONESHOT);
- writel(u | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
+ sun4i_clkevt_time_setup(0, ticks_per_jiffy);
+ sun4i_clkevt_time_start(0, true);
break;
-
case CLOCK_EVT_MODE_ONESHOT:
- writel(u | TIMER_CTL_ONESHOT, timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
+ sun4i_clkevt_time_start(0, false);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
- writel(u & ~(TIMER_CTL_ENABLE), timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
break;
}
}
@@ -62,10 +103,9 @@ static void sun4i_clkevt_mode(enum clock_event_mode mode,
static int sun4i_clkevt_next_event(unsigned long evt,
struct clock_event_device *unused)
{
- u32 u = readl(timer_base + TIMER_CTL_REG(0));
- writel(evt, timer_base + TIMER_CNTVAL_REG(0));
- writel(u | TIMER_CTL_ENABLE | TIMER_CTL_AUTORELOAD,
- timer_base + TIMER_CTL_REG(0));
+ sun4i_clkevt_time_stop(0);
+ sun4i_clkevt_time_setup(0, evt);
+ sun4i_clkevt_time_start(0, false);
return 0;
}
@@ -96,6 +136,11 @@ static struct irqaction sun4i_timer_irq = {
.dev_id = &sun4i_clockevent,
};
+static u32 sun4i_timer_sched_read(void)
+{
+ return ~readl(timer_base + TIMER_CNTVAL_REG(1));
+}
+
static void __init sun4i_timer_init(struct device_node *node)
{
unsigned long rate = 0;
@@ -114,22 +159,23 @@ static void __init sun4i_timer_init(struct device_node *node)
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
panic("Can't get timer clock");
+ clk_prepare_enable(clk);
rate = clk_get_rate(clk);
- writel(rate / (TIMER_SCAL * HZ),
- timer_base + TIMER_INTVAL_REG(0));
+ writel(~0, timer_base + TIMER_INTVAL_REG(1));
+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD |
+ TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
+ timer_base + TIMER_CTL_REG(1));
+
+ setup_sched_clock(sun4i_timer_sched_read, 32, rate);
+ clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name,
+ rate, 300, 32, clocksource_mmio_readl_down);
- /* set clock source to HOSC, 16 pre-division */
- val = readl(timer_base + TIMER_CTL_REG(0));
- val &= ~(0x07 << 4);
- val &= ~(0x03 << 2);
- val |= (4 << 4) | (1 << 2);
- writel(val, timer_base + TIMER_CTL_REG(0));
+ ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
- /* set mode to auto reload */
- val = readl(timer_base + TIMER_CTL_REG(0));
- writel(val | TIMER_CTL_AUTORELOAD, timer_base + TIMER_CTL_REG(0));
+ writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
+ timer_base + TIMER_CTL_REG(0));
ret = setup_irq(irq, &sun4i_timer_irq);
if (ret)
@@ -141,8 +187,8 @@ static void __init sun4i_timer_init(struct device_node *node)
sun4i_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&sun4i_clockevent, rate / TIMER_SCAL,
- 0x1, 0xff);
+ clockevents_config_and_register(&sun4i_clockevent, rate, 0x1,
+ 0xffffffff);
}
CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer",
sun4i_timer_init);
diff --git a/drivers/clocksource/time-orion.c b/drivers/clocksource/time-orion.c
index ecbeb6810215..9c7f018a67ca 100644
--- a/drivers/clocksource/time-orion.c
+++ b/drivers/clocksource/time-orion.c
@@ -19,7 +19,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/spinlock.h>
-#include <asm/sched_clock.h>
+#include <linux/sched_clock.h>
#define TIMER_CTRL 0x00
#define TIMER0_EN BIT(0)
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index c463ce990c48..93b7f96f9c59 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -23,16 +23,20 @@
#define ARCH_TIMER_CTRL_IT_MASK (1 << 1)
#define ARCH_TIMER_CTRL_IT_STAT (1 << 2)
-#define ARCH_TIMER_REG_CTRL 0
-#define ARCH_TIMER_REG_TVAL 1
+enum arch_timer_reg {
+ ARCH_TIMER_REG_CTRL,
+ ARCH_TIMER_REG_TVAL,
+};
#define ARCH_TIMER_PHYS_ACCESS 0
#define ARCH_TIMER_VIRT_ACCESS 1
+#define ARCH_TIMER_MEM_PHYS_ACCESS 2
+#define ARCH_TIMER_MEM_VIRT_ACCESS 3
#ifdef CONFIG_ARM_ARCH_TIMER
extern u32 arch_timer_get_rate(void);
-extern u64 arch_timer_read_counter(void);
+extern u64 (*arch_timer_read_counter)(void);
extern struct timecounter *arch_timer_get_timecounter(void);
#else