summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig4
-rw-r--r--arch/blackfin/Kconfig2
-rw-r--r--drivers/iommu/Kconfig4
-rw-r--r--drivers/net/can/sja1000/Kconfig2
-rw-r--r--drivers/net/irda/Kconfig2
-rw-r--r--kernel/trace/Kconfig2
-rw-r--r--sound/soc/imx/Kconfig2
8 files changed, 11 insertions, 11 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cf006d40342c..73f90dd5554b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1927,10 +1927,10 @@ choice
default ZBOOT_ROM_NONE
help
Include experimental SD/MMC loading code in the ROM-able zImage.
- With this enabled it is possible to write the the ROM-able zImage
+ With this enabled it is possible to write the ROM-able zImage
kernel image to an MMC or SD card and boot the kernel straight
from the reset vector. At reset the processor Mask ROM will load
- the first part of the the ROM-able zImage which in turn loads the
+ the first part of the ROM-able zImage which in turn loads the
rest the kernel image to RAM.
config ZBOOT_ROM_NONE
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 82c0915729ee..06ca1cd4cae2 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -210,7 +210,7 @@ config SMDK6410_WM1190_EV1
and audio daughtercard for the Samsung SMDK6410 reference
platform. Enabling this option will build support for this
module into the kernel. The presence of the module will be
- detected at runtime so the the resulting kernel can be used
+ detected at runtime so the resulting kernel can be used
with or without the 1190-EV1 fitted.
config SMDK6410_WM1192_EV1
@@ -226,7 +226,7 @@ config SMDK6410_WM1192_EV1
daughtercard for the Samsung SMDK6410 reference platform.
Enabling this option will build support for this module into
the kernel. The presence of the daughtercard will be
- detected at runtime so the the resulting kernel can be used
+ detected at runtime so the resulting kernel can be used
with or without the 1192-EV1 fitted.
config MACH_NCP
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 373a6902d8fa..b83e89ced988 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1258,7 +1258,7 @@ config PM_BFIN_WAKE_GP
(all processors, except ADSP-BF549). This option sets
the general-purpose wake-up enable (GPWE) control bit to enable
wake-up upon detection of an active low signal on the /GPW (PH7) pin.
- On ADSP-BF549 this option enables the the same functionality on the
+ On ADSP-BF549 this option enables the same functionality on the
/MRXON pin also PH7.
endmenu
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 3bd9fff5c589..c69843742bb0 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -43,7 +43,7 @@ config AMD_IOMMU
With this option you can enable support for AMD IOMMU hardware in
your system. An IOMMU is a hardware component which provides
remapping of DMA memory accesses from devices. With an AMD IOMMU you
- can isolate the the DMA memory of different devices and protect the
+ can isolate the DMA memory of different devices and protect the
system from misbehaving device drivers or hardware.
You can find out if your system has an AMD IOMMU if you look into
@@ -67,7 +67,7 @@ config AMD_IOMMU_V2
---help---
This option enables support for the AMD IOMMUv2 features of the IOMMU
hardware. Select this option if you want to use devices that support
- the the PCI PRI and PASID interface.
+ the PCI PRI and PASID interface.
# Intel IOMMU support
config DMAR_TABLE
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index b60d6c5f29a0..03df9a8f2bbf 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -75,7 +75,7 @@ config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI
---help---
- This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+ This driver is for the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
config CAN_PLX_PCI
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 468047866c8c..1b6d5c03edfa 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -316,7 +316,7 @@ config AU1000_FIR
tristate "Alchemy IrDA SIR/FIR"
depends on IRDA && MIPS_ALCHEMY
help
- Say Y/M here to build suppor the the IrDA peripheral on the
+ Say Y/M here to build support the IrDA peripheral on the
Alchemy Au1000 and Au1100 SoCs.
Say M to build a module; it will be called au1k_ir.ko
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a1d2849f2473..33f768b779c9 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -272,7 +272,7 @@ config PROFILE_ANNOTATED_BRANCHES
bool "Trace likely/unlikely profiler"
select TRACE_BRANCH_PROFILING
help
- This tracer profiles all the the likely and unlikely macros
+ This tracer profiles all likely and unlikely macros
in the kernel. It will display the results in:
/sys/kernel/debug/tracing/trace_stat/branch_annotated
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index 810acaa09009..d83e5d0b5d52 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -28,7 +28,7 @@ config SND_SOC_IMX_AUDMUX
tristate
config SND_MXC_SOC_WM1133_EV1
- tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
+ tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
select SND_MXC_SOC_FIQ