diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-15 15:04:25 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-08-15 15:04:25 -0700 |
commit | 9a76aba02a37718242d7cdc294f0a3901928aa57 (patch) | |
tree | 2040d038f85d2120f21af83b0793efd5af1864e3 /tools/testing/selftests/drivers/net/mlxsw | |
parent | 0a957467c5fd46142bc9c52758ffc552d4c5e2f7 (diff) | |
parent | 26a1ccc6c117be8e33e0410fce8c5298b0015b99 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw')
13 files changed, 1844 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh new file mode 100755 index 000000000000..76f1ab4898d9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh @@ -0,0 +1,217 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test uses standard topology for testing gretap. See +# ../../../net/forwarding/mirror_gre_topo_lib.sh for more details. +# +# Test offloading various features of offloading gretap mirrors specific to +# mlxsw. + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/mirror_lib.sh +source $lib_dir/mirror_gre_lib.sh +source $lib_dir/mirror_gre_topo_lib.sh + +setup_keyful() +{ + tunnel_create gt6-key ip6gretap 2001:db8:3::1 2001:db8:3::2 \ + ttl 100 tos inherit allow-localremote \ + key 1234 + + tunnel_create h3-gt6-key ip6gretap 2001:db8:3::2 2001:db8:3::1 \ + key 1234 + ip link set h3-gt6-key vrf v$h3 + matchall_sink_create h3-gt6-key + + ip address add dev $swp3 2001:db8:3::1/64 + ip address add dev $h3 2001:db8:3::2/64 +} + +cleanup_keyful() +{ + ip address del dev $h3 2001:db8:3::2/64 + ip address del dev $swp3 2001:db8:3::1/64 + + tunnel_destroy h3-gt6-key + tunnel_destroy gt6-key +} + +setup_soft() +{ + # Set up a topology for testing underlay routes that point at an + # unsupported soft device. + + tunnel_create gt6-soft ip6gretap 2001:db8:4::1 2001:db8:4::2 \ + ttl 100 tos inherit allow-localremote + + tunnel_create h3-gt6-soft ip6gretap 2001:db8:4::2 2001:db8:4::1 + ip link set h3-gt6-soft vrf v$h3 + matchall_sink_create h3-gt6-soft + + ip link add name v1 type veth peer name v2 + ip link set dev v1 up + ip address add dev v1 2001:db8:4::1/64 + + ip link set dev v2 vrf v$h3 + ip link set dev v2 up + ip address add dev v2 2001:db8:4::2/64 +} + +cleanup_soft() +{ + ip link del dev v1 + + tunnel_destroy h3-gt6-soft + tunnel_destroy gt6-soft +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + vrf_prepare + mirror_gre_topo_create + + ip address add dev $swp3 2001:db8:2::1/64 + ip address add dev $h3 2001:db8:2::2/64 + + ip address add dev $swp3 192.0.2.129/28 + ip address add dev $h3 192.0.2.130/28 + + setup_keyful + setup_soft +} + +cleanup() +{ + pre_cleanup + + cleanup_soft + cleanup_keyful + + ip address del dev $h3 2001:db8:2::2/64 + ip address del dev $swp3 2001:db8:2::1/64 + + ip address del dev $h3 192.0.2.130/28 + ip address del dev $swp3 192.0.2.129/28 + + mirror_gre_topo_destroy + vrf_cleanup +} + +test_span_gre_ttl_inherit() +{ + local tundev=$1; shift + local type=$1; shift + local what=$1; shift + + RET=0 + + ip link set dev $tundev type $type ttl inherit + mirror_install $swp1 ingress $tundev "matchall $tcflags" + fail_test_span_gre_dir $tundev ingress + + ip link set dev $tundev type $type ttl 100 + + quick_test_span_gre_dir $tundev ingress + mirror_uninstall $swp1 ingress + + log_test "$what: no offload on TTL of inherit ($tcflags)" +} + +test_span_gre_tos_fixed() +{ + local tundev=$1; shift + local type=$1; shift + local what=$1; shift + + RET=0 + + ip link set dev $tundev type $type tos 0x10 + mirror_install $swp1 ingress $tundev "matchall $tcflags" + fail_test_span_gre_dir $tundev ingress + + ip link set dev $tundev type $type tos inherit + quick_test_span_gre_dir $tundev ingress + mirror_uninstall $swp1 ingress + + log_test "$what: no offload on a fixed TOS ($tcflags)" +} + +test_span_failable() +{ + local should_fail=$1; shift + local tundev=$1; shift + local what=$1; shift + + RET=0 + + mirror_install $swp1 ingress $tundev "matchall $tcflags" + if ((should_fail)); then + fail_test_span_gre_dir $tundev ingress + else + quick_test_span_gre_dir $tundev ingress + fi + mirror_uninstall $swp1 ingress + + log_test "$what: should_fail=$should_fail ($tcflags)" +} + +test_failable() +{ + local should_fail=$1; shift + + test_span_failable $should_fail gt6-key "mirror to keyful gretap" + test_span_failable $should_fail gt6-soft "mirror to gretap w/ soft underlay" +} + +test_sw() +{ + slow_path_trap_install $swp1 ingress + slow_path_trap_install $swp1 egress + + test_failable 0 + + slow_path_trap_uninstall $swp1 egress + slow_path_trap_uninstall $swp1 ingress +} + +test_hw() +{ + test_failable 1 + + test_span_gre_tos_fixed gt4 gretap "mirror to gretap" + test_span_gre_tos_fixed gt6 ip6gretap "mirror to ip6gretap" + + test_span_gre_ttl_inherit gt4 gretap "mirror to gretap" + test_span_gre_ttl_inherit gt6 ip6gretap "mirror to ip6gretap" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +if ! tc_offload_check; then + check_err 1 "Could not test offloaded functionality" + log_test "mlxsw-specific tests for mirror to gretap" + exit +fi + +tcflags="skip_hw" +test_sw + +tcflags="skip_sw" +test_hw + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh new file mode 100644 index 000000000000..6f3a70df63bc --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0 + +# Test offloading a number of mirrors-to-gretap. The test creates a number of +# tunnels. Then it adds one flower mirror for each of the tunnels, matching a +# given host IP. Then it generates traffic at each of the host IPs and checks +# that the traffic has been mirrored at the appropriate tunnel. +# +# +--------------------------+ +--------------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 2001:db8:1:X::1/64 | | 2001:db8:1:X::2/64 | | +# +-----|--------------------+ +--------------------|-----+ +# | | +# +-----|-------------------------------------------------------------|-----+ +# | SW o--> mirrors | | +# | +---|-------------------------------------------------------------|---+ | +# | | + $swp1 BR $swp2 + | | +# | +---------------------------------------------------------------------+ | +# | | +# | + $swp3 + gt6-<X> (ip6gretap) | +# | | 2001:db8:2:X::1/64 : loc=2001:db8:2:X::1 | +# | | : rem=2001:db8:2:X::2 | +# | | : ttl=100 | +# | | : tos=inherit | +# | | : | +# +-----|--------------------------------:----------------------------------+ +# | : +# +-----|--------------------------------:----------------------------------+ +# | H3 + $h3 + h3-gt6-<X> (ip6gretap) | +# | 2001:db8:2:X::2/64 loc=2001:db8:2:X::2 | +# | rem=2001:db8:2:X::1 | +# | ttl=100 | +# | tos=inherit | +# | | +# +-------------------------------------------------------------------------+ + +source ../../../../net/forwarding/mirror_lib.sh + +MIRROR_NUM_NETIFS=6 + +mirror_gre_ipv6_addr() +{ + local net=$1; shift + local num=$1; shift + + printf "2001:db8:%x:%x" $net $num +} + +mirror_gre_tunnels_create() +{ + local count=$1; shift + local should_fail=$1; shift + + MIRROR_GRE_BATCH_FILE="$(mktemp)" + for ((i=0; i < count; ++i)); do + local match_dip=$(mirror_gre_ipv6_addr 1 $i)::2 + local htun=h3-gt6-$i + local tun=gt6-$i + + ((mirror_gre_tunnels++)) + + ip address add dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64 + ip address add dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64 + + ip address add dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64 + ip address add dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64 + + tunnel_create $tun ip6gretap \ + $(mirror_gre_ipv6_addr 2 $i)::1 \ + $(mirror_gre_ipv6_addr 2 $i)::2 \ + ttl 100 tos inherit allow-localremote + + tunnel_create $htun ip6gretap \ + $(mirror_gre_ipv6_addr 2 $i)::2 \ + $(mirror_gre_ipv6_addr 2 $i)::1 + ip link set $htun vrf v$h3 + matchall_sink_create $htun + + cat >> $MIRROR_GRE_BATCH_FILE <<-EOF + filter add dev $swp1 ingress pref 1000 \ + protocol ipv6 \ + flower $tcflags dst_ip $match_dip \ + action mirred egress mirror dev $tun + EOF + done + + tc -b $MIRROR_GRE_BATCH_FILE + check_err_fail $should_fail $? "Mirror rule insertion" +} + +mirror_gre_tunnels_destroy() +{ + local count=$1; shift + + for ((i=0; i < count; ++i)); do + local htun=h3-gt6-$i + local tun=gt6-$i + + ip address del dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64 + ip address del dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64 + + ip address del dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64 + ip address del dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64 + + tunnel_destroy $htun + tunnel_destroy $tun + done +} + +__mirror_gre_test() +{ + local count=$1; shift + local should_fail=$1; shift + + mirror_gre_tunnels_create $count $should_fail + if ((should_fail)); then + return + fi + + sleep 5 + + for ((i = 0; i < count; ++i)); do + local dip=$(mirror_gre_ipv6_addr 1 $i)::2 + local htun=h3-gt6-$i + local message + + icmp6_capture_install $htun + mirror_test v$h1 "" $dip $htun 100 10 + icmp6_capture_uninstall $htun + done +} + +mirror_gre_test() +{ + local count=$1; shift + local should_fail=$1; shift + + if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + tcflags="skip_sw" + __mirror_gre_test $count $should_fail +} + +mirror_gre_setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + h3=${NETIFS[p6]} + + mirror_gre_tunnels=0 + + vrf_prepare + + simple_if_init $h1 + simple_if_init $h2 + simple_if_init $h3 + + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 up + + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + tc qdisc add dev $swp1 clsact + + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + + ip link set dev $swp3 up +} + +mirror_gre_cleanup() +{ + mirror_gre_tunnels_destroy $mirror_gre_tunnels + + ip link set dev $swp3 down + + ip link set dev $swp2 down + + tc qdisc del dev $swp1 clsact + ip link set dev $swp1 down + + ip link del dev br1 + + simple_if_fini $h3 + simple_if_fini $h2 + simple_if_fini $h1 + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh new file mode 100755 index 000000000000..1ca631d5aaba --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh @@ -0,0 +1,189 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization and rewrite. Packets ingress $swp1 with a DSCP +# tag and are prioritized according to the map at $swp1. They egress $swp2 and +# the DSCP value is updated to match the map at that interface. The updated DSCP +# tag is verified at $h2. +# +# ICMP responses are produced with the same DSCP tag that arrived at $h2. They +# go through prioritization at $swp2 and DSCP retagging at $swp1. The tag is +# verified at $h1--it should match the original tag. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.2/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | +-|----------------------------------------------------------------|-+ | +# | | + $swp1 BR $swp2 + | | +# | | APP=0,5,10 .. 7,5,17 APP=0,5,20 .. 7,5,27 | | +# | +--------------------------------------------------------------------+ | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_dscp +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +h1_create() +{ + local dscp; + + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 10 +} + +h1_destroy() +{ + dscp_capture_uninstall $h1 10 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 20 +} + +h2_destroy() +{ + dscp_capture_uninstall $h2 20 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/28 +} + +dscp_map() +{ + local base=$1; shift + + for prio in {0..7}; do + echo app=$prio,5,$((base + prio)) + done +} + +switch_create() +{ + ip link add name br1 type bridge vlan_filtering 1 + ip link set dev br1 up + ip link set dev $swp1 master br1 + ip link set dev $swp1 up + ip link set dev $swp2 master br1 + ip link set dev $swp2 up + + lldptool -T -i $swp1 -V APP $(dscp_map 10) >/dev/null + lldptool -T -i $swp2 -V APP $(dscp_map 20) >/dev/null + lldpad_app_wait_set $swp1 + lldpad_app_wait_set $swp2 +} + +switch_destroy() +{ + lldptool -T -i $swp2 -V APP -d $(dscp_map 20) >/dev/null + lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null + lldpad_app_wait_del + + ip link set dev $swp2 nomaster + ip link set dev $swp1 nomaster + ip link del dev br1 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local dev_10=$1; shift + local dev_20=$1; shift + + local dscp_10=$(((prio + 10) << 2)) + local dscp_20=$(((prio + 20) << 2)) + + RET=0 + + local -A t0s + eval "t0s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + ip vrf exec $vrf_name \ + ${PING} -Q $dscp_10 ${sip:+-I $sip} $dip \ + -c 10 -i 0.1 -w 2 &> /dev/null + + local -A t1s + eval "t1s=($(dscp_fetch_stats $dev_10 10) + $(dscp_fetch_stats $dev_20 20))" + + for key in ${!t0s[@]}; do + local expect + if ((key == prio+10 || key == prio+20)); then + expect=10 + else + expect=0 + fi + + local delta=$((t1s[$key] - t0s[$key])) + ((expect == delta)) + check_err $? "DSCP $key: Expected to capture $expect packets, got $delta." + done + + log_test "DSCP rewrite: $dscp_10-(prio $prio)-$dscp_20" +} + +test_dscp() +{ + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.2 $prio $h1 $h2 + done +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh new file mode 100755 index 000000000000..281d90766e12 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh @@ -0,0 +1,233 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for DSCP prioritization in the router. +# +# With ip_forward_update_priority disabled, the packets are expected to keep +# their DSCP (which in this test uses only values 0..7) intact as they are +# forwarded by the switch. That is verified at $h2. ICMP responses are formed +# with the same DSCP as the requests, and likewise pass through the switch +# intact, which is verified at $h1. +# +# With ip_forward_update_priority enabled, router reprioritizes the packets +# according to the table in reprioritize(). Thus, say, DSCP 7 maps to priority +# 4, which on egress maps back to DSCP 4. The response packet then gets +# reprioritized to 6, getting DSCP 6 on egress. +# +# +----------------------+ +----------------------+ +# | H1 | | H2 | +# | + $h1 | | $h2 + | +# | | 192.0.2.1/28 | | 192.0.2.18/28 | | +# +----|-----------------+ +----------------|-----+ +# | | +# +----|----------------------------------------------------------------|-----+ +# | SW | | | +# | + $swp1 $swp2 + | +# | 192.0.2.2/28 192.0.2.17/28 | +# | APP=0,5,0 .. 7,5,7 APP=0,5,0 .. 7,5,7 | +# +---------------------------------------------------------------------------+ + +ALL_TESTS=" + ping_ipv4 + test_update + test_no_update +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=4 +source $lib_dir/lib.sh + +reprioritize() +{ + local in=$1; shift + + # This is based on rt_tos2priority in include/net/route.h. Assuming 1:1 + # mapping between priorities and TOS, it yields a new priority for a + # packet with ingress priority of $in. + local -a reprio=(0 0 2 2 6 6 4 4) + + echo ${reprio[$in]} +} + +h1_create() +{ + local dscp; + + simple_if_init $h1 192.0.2.1/28 + tc qdisc add dev $h1 clsact + dscp_capture_install $h1 0 + ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2 +} + +h1_destroy() +{ + ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2 + dscp_capture_uninstall $h1 0 + tc qdisc del dev $h1 clsact + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.18/28 + tc qdisc add dev $h2 clsact + dscp_capture_install $h2 0 + ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17 +} + +h2_destroy() +{ + ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17 + dscp_capture_uninstall $h2 0 + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.18/28 +} + +dscp_map() +{ + local base=$1; shift + + for prio in {0..7}; do + echo app=$prio,5,$((base + prio)) + done +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/28 + __simple_if_init $swp2 v$swp1 192.0.2.17/28 + + lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null + lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null + lldpad_app_wait_set $swp1 + lldpad_app_wait_set $swp2 +} + +switch_destroy() +{ + lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null + lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null + lldpad_app_wait_del + + __simple_if_fini $swp2 192.0.2.17/28 + simple_if_fini $swp1 192.0.2.2/28 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + sysctl_set net.ipv4.ip_forward_update_priority 1 + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + sysctl_restore net.ipv4.ip_forward_update_priority + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.18 +} + +dscp_ping_test() +{ + local vrf_name=$1; shift + local sip=$1; shift + local dip=$1; shift + local prio=$1; shift + local reprio=$1; shift + local dev1=$1; shift + local dev2=$1; shift + + local prio2=$($reprio $prio) # ICMP Request egress prio + local prio3=$($reprio $prio2) # ICMP Response egress prio + + local dscp=$((prio << 2)) # ICMP Request ingress DSCP + local dscp2=$((prio2 << 2)) # ICMP Request egress DSCP + local dscp3=$((prio3 << 2)) # ICMP Response egress DSCP + + RET=0 + + eval "local -A dev1_t0s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t0s=($(dscp_fetch_stats $dev2 0))" + + ip vrf exec $vrf_name \ + ${PING} -Q $dscp ${sip:+-I $sip} $dip \ + -c 10 -i 0.1 -w 2 &> /dev/null + + eval "local -A dev1_t1s=($(dscp_fetch_stats $dev1 0))" + eval "local -A dev2_t1s=($(dscp_fetch_stats $dev2 0))" + + for i in {0..7}; do + local dscpi=$((i << 2)) + local expect2=0 + local expect3=0 + + if ((i == prio2)); then + expect2=10 + fi + if ((i == prio3)); then + expect3=10 + fi + + local delta=$((dev2_t1s[$i] - dev2_t0s[$i])) + ((expect2 == delta)) + check_err $? "DSCP $dscpi@$dev2: Expected to capture $expect2 packets, got $delta." + + delta=$((dev1_t1s[$i] - dev1_t0s[$i])) + ((expect3 == delta)) + check_err $? "DSCP $dscpi@$dev1: Expected to capture $expect3 packets, got $delta." + done + + log_test "DSCP rewrite: $dscp-(prio $prio2)-$dscp2-(prio $prio3)-$dscp3" +} + +__test_update() +{ + local update=$1; shift + local reprio=$1; shift + + sysctl_restore net.ipv4.ip_forward_update_priority + sysctl_set net.ipv4.ip_forward_update_priority $update + + for prio in {0..7}; do + dscp_ping_test v$h1 192.0.2.1 192.0.2.18 $prio $reprio $h1 $h2 + done +} + +test_update() +{ + __test_update 1 reprioritize +} + +test_no_update() +{ + __test_update 0 echo +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh new file mode 100644 index 000000000000..d231649b4f01 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh @@ -0,0 +1,167 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ROUTER_NUM_NETIFS=4 + +router_h1_create() +{ + simple_if_init $h1 192.0.1.1/24 + ip route add 193.0.0.0/8 via 192.0.1.2 dev $h1 +} + +router_h1_destroy() +{ + ip route del 193.0.0.0/8 via 192.0.1.2 dev $h1 + simple_if_fini $h1 192.0.1.1/24 +} + +router_h2_create() +{ + simple_if_init $h2 192.0.2.1/24 + tc qdisc add dev $h2 handle ffff: ingress +} + +router_h2_destroy() +{ + tc qdisc del dev $h2 handle ffff: ingress + simple_if_fini $h2 192.0.2.1/24 +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + ip address add 192.0.1.2/24 dev $rp1 + ip address add 192.0.2.2/24 dev $rp2 +} + +router_destroy() +{ + ip address del 192.0.2.2/24 dev $rp2 + ip address del 192.0.1.2/24 dev $rp1 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +router_setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + rp1mac=$(mac_get $rp1) + + vrf_prepare + + router_h1_create + router_h2_create + + router_create +} + +router_offload_validate() +{ + local route_count=$1 + local offloaded_count + + offloaded_count=$(ip route | grep -o 'offload' | wc -l) + [[ $offloaded_count -ge $route_count ]] +} + +router_routes_create() +{ + local route_count=$1 + local count=0 + + ROUTE_FILE="$(mktemp)" + + for i in {0..255} + do + for j in {0..255} + do + for k in {0..255} + do + if [[ $count -eq $route_count ]]; then + break 3 + fi + + echo route add 193.${i}.${j}.${k}/32 via \ + 192.0.2.1 dev $rp2 >> $ROUTE_FILE + ((count++)) + done + done + done + + ip -b $ROUTE_FILE &> /dev/null +} + +router_routes_destroy() +{ + if [[ -v ROUTE_FILE ]]; then + rm -f $ROUTE_FILE + fi +} + +router_test() +{ + local route_count=$1 + local should_fail=$2 + local count=0 + + RET=0 + + router_routes_create $route_count + + router_offload_validate $route_count + check_err_fail $should_fail $? "Offload of $route_count routes" + if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then + return + fi + + tc filter add dev $h2 ingress protocol ip pref 1 flower \ + skip_sw dst_ip 193.0.0.0/8 action drop + + for i in {0..255} + do + for j in {0..255} + do + for k in {0..255} + do + if [[ $count -eq $route_count ]]; then + break 3 + fi + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac \ + -A 192.0.1.1 -B 193.${i}.${j}.${k} \ + -t ip -q + ((count++)) + done + done + done + + tc_check_packets "dev $h2 ingress" 1 $route_count + check_err $? "Offload mismatch" + + tc filter del dev $h2 ingress protocol ip pref 1 flower \ + skip_sw dst_ip 193.0.0.0/8 action drop + + router_routes_destroy +} + +router_cleanup() +{ + pre_cleanup + + router_routes_destroy + router_destroy + + router_h2_destroy + router_h1_destroy + + vrf_cleanup +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh new file mode 100755 index 000000000000..3b75180f455d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -0,0 +1,366 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2. +# It tries to exercise as many code paths in the eRP state machine as +# possible. + +lib_dir=$(dirname $0)/../../../../net/forwarding + +ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ + multiple_masks_test ctcam_edge_cases_test" +NUM_NETIFS=2 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 198.51.100.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 198.51.100.2/24 + tc qdisc add dev $h2 clsact +} + +h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24 +} + +single_mask_test() +{ + # When only a single mask is required, the device uses the master + # mask and not the eRP table. Verify that under this mode the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 198.51.100.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 2 + check_err $? "Two filters - did not match highest priority" + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match lowest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Single filter - did not match after delete" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "single mask test ($tcflags)" +} + +identical_filters_test() +{ + # When two filters that only differ in their priority are used, + # one needs to be inserted into the C-TCAM. This test verifies + # that filters are correctly spilled to C-TCAM and that the right + # filter is matched + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match C-TCAM filter after A-TCAM delete" + + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 2 + check_err $? "Did not match C-TCAM filter after A-TCAM add" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter after C-TCAM delete" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "identical filters test ($tcflags)" +} + +two_masks_test() +{ + # When more than one mask is required, the eRP table is used. This + # test verifies that the eRP table is correctly allocated and used + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.0.0/16 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Two filters - did not match highest priority" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Single filter - did not match" + + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Two filters - did not match highest priority after add" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "two masks test ($tcflags)" +} + +multiple_masks_test() +{ + # The number of masks in a region is limited. Once the maximum + # number of masks has been reached filters that require new + # masks are spilled to the C-TCAM. This test verifies that + # spillage is performed correctly and that the right filter is + # matched + + local index + + RET=0 + + NUM_MASKS=32 + BASE_INDEX=100 + + for i in $(eval echo {1..$NUM_MASKS}); do + index=$((BASE_INDEX - i)) + + tc filter add dev $h2 ingress protocol ip pref $index \ + handle $index \ + flower $tcflags dst_ip 192.0.2.2/${i} src_ip 192.0.2.1 \ + action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 1 + check_err $? "$i filters - did not match highest priority (add)" + done + + for i in $(eval echo {$NUM_MASKS..1}); do + index=$((BASE_INDEX - i)) + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \ + -B 192.0.2.2 -t ip -q + + tc_check_packets "dev $h2 ingress" $index 2 + check_err $? "$i filters - did not match highest priority (del)" + + tc filter del dev $h2 ingress protocol ip pref $index \ + handle $index flower + done + + log_test "multiple masks test ($tcflags)" +} + +ctcam_two_atcam_masks_test() +{ + RET=0 + + # First case: C-TCAM is disabled when there are two A-TCAM masks. + # We push a filter into the C-TCAM by using two identical filters + # as in identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.2.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match A-TCAM filter" + + # Delete both A-TCAM and C-TCAM filters and make sure the remaining + # A-TCAM filter still works + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "ctcam with two atcam masks test ($tcflags)" +} + +ctcam_one_atcam_mask_test() +{ + RET=0 + + # Second case: C-TCAM is disabled when there is one A-TCAM mask. + # The test is similar to identical_filters_test() + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match C-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match A-TCAM filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with one atcam mask test ($tcflags)" +} + +ctcam_no_atcam_masks_test() +{ + RET=0 + + # Third case: C-TCAM is disabled when there are no A-TCAM masks + # This test exercises the code path that transitions the eRP table + # to its initial state after deleting the last C-TCAM mask + + # Filter goes into A-TCAM + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + # Filter goes into C-TCAM + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "ctcam with no atcam masks test ($tcflags)" +} + +ctcam_edge_cases_test() +{ + # When the C-TCAM is disabled after deleting the last C-TCAM + # mask, we want to make sure the eRP state machine is put in + # the correct state + + ctcam_two_atcam_masks_test + ctcam_one_atcam_mask_test + ctcam_no_atcam_masks_test +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +if ! tc_offload_check; then + check_err 1 "Could not test offloaded functionality" + log_test "mlxsw-specific tests for tc flower" + exit +else + tcflags="skip_sw" + tests_run +fi + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh new file mode 100644 index 000000000000..73035e25085d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh @@ -0,0 +1,119 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source "../../../../net/forwarding/devlink_lib.sh" + +if [ "$DEVLINK_VIDDID" != "15b3:cb84" ]; then + echo "SKIP: test is tailored for Mellanox Spectrum" + exit 1 +fi + +# Needed for returning to default +declare -A KVD_DEFAULTS + +KVD_CHILDREN="linear hash_single hash_double" +KVDL_CHILDREN="singles chunks large_chunks" + +devlink_sp_resource_minimize() +{ + local size + local i + + for i in $KVD_CHILDREN; do + size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]') + devlink_resource_size_set "$size" kvd "$i" + done + + for i in $KVDL_CHILDREN; do + size=$(devlink_resource_get kvd linear "$i" | \ + jq '.["size_min"]') + devlink_resource_size_set "$size" kvd linear "$i" + done +} + +devlink_sp_size_kvd_to_default() +{ + local need_reload=0 + local i + + for i in $KVD_CHILDREN; do + local size=$(echo "${KVD_DEFAULTS[kvd_$i]}" | jq '.["size"]') + current_size=$(devlink_resource_size_get kvd "$i") + + if [ "$size" -ne "$current_size" ]; then + devlink_resource_size_set "$size" kvd "$i" + need_reload=1 + fi + done + + for i in $KVDL_CHILDREN; do + local size=$(echo "${KVD_DEFAULTS[kvd_linear_$i]}" | \ + jq '.["size"]') + current_size=$(devlink_resource_size_get kvd linear "$i") + + if [ "$size" -ne "$current_size" ]; then + devlink_resource_size_set "$size" kvd linear "$i" + need_reload=1 + fi + done + + if [ "$need_reload" -ne "0" ]; then + devlink_reload + fi +} + +devlink_sp_read_kvd_defaults() +{ + local key + local i + + KVD_DEFAULTS[kvd]=$(devlink_resource_get "kvd") + for i in $KVD_CHILDREN; do + key=kvd_$i + KVD_DEFAULTS[$key]=$(devlink_resource_get kvd "$i") + done + + for i in $KVDL_CHILDREN; do + key=kvd_linear_$i + KVD_DEFAULTS[$key]=$(devlink_resource_get kvd linear "$i") + done +} + +KVD_PROFILES="default scale ipv4_max" + +devlink_sp_resource_kvd_profile_set() +{ + local profile=$1 + + case "$profile" in + scale) + devlink_resource_size_set 64000 kvd linear + devlink_resource_size_set 15616 kvd linear singles + devlink_resource_size_set 32000 kvd linear chunks + devlink_resource_size_set 16384 kvd linear large_chunks + devlink_resource_size_set 128000 kvd hash_single + devlink_resource_size_set 48000 kvd hash_double + devlink_reload + ;; + ipv4_max) + devlink_resource_size_set 64000 kvd linear + devlink_resource_size_set 15616 kvd linear singles + devlink_resource_size_set 32000 kvd linear chunks + devlink_resource_size_set 16384 kvd linear large_chunks + devlink_resource_size_set 144000 kvd hash_single + devlink_resource_size_set 32768 kvd hash_double + devlink_reload + ;; + default) + devlink_resource_size_set 98304 kvd linear + devlink_resource_size_set 16384 kvd linear singles + devlink_resource_size_set 49152 kvd linear chunks + devlink_resource_size_set 32768 kvd linear large_chunks + devlink_resource_size_set 87040 kvd hash_single + devlink_resource_size_set 60416 kvd hash_double + devlink_reload + ;; + *) + check_err 1 "Unknown profile $profile" + esac +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh new file mode 100755 index 000000000000..b1fe960e398a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh @@ -0,0 +1,117 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=1 +source devlink_lib_spectrum.sh + +setup_prepare() +{ + devlink_sp_read_kvd_defaults +} + +cleanup() +{ + pre_cleanup + devlink_sp_size_kvd_to_default +} + +trap cleanup EXIT + +setup_prepare + +profiles_test() +{ + local i + + log_info "Running profile tests" + + for i in $KVD_PROFILES; do + RET=0 + devlink_sp_resource_kvd_profile_set $i + log_test "'$i' profile" + done + + # Default is explicitly tested at end to ensure it's actually applied + RET=0 + devlink_sp_resource_kvd_profile_set "default" + log_test "'default' profile" +} + +resources_min_test() +{ + local size + local i + local j + + log_info "Running KVD-minimum tests" + + for i in $KVD_CHILDREN; do + RET=0 + size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]') + devlink_resource_size_set "$size" kvd "$i" + + # In case of linear, need to minimize sub-resources as well + if [[ "$i" == "linear" ]]; then + for j in $KVDL_CHILDREN; do + devlink_resource_size_set 0 kvd linear "$j" + done + fi + + devlink_reload + devlink_sp_size_kvd_to_default + log_test "'$i' minimize [$size]" + done +} + +resources_max_test() +{ + local min_size + local size + local i + local j + + log_info "Running KVD-maximum tests" + for i in $KVD_CHILDREN; do + RET=0 + devlink_sp_resource_minimize + + # Calculate the maximum possible size for the given partition + size=$(devlink_resource_size_get kvd) + for j in $KVD_CHILDREN; do + if [ "$i" != "$j" ]; then + min_size=$(devlink_resource_get kvd "$j" | \ + jq '.["size_min"]') + size=$((size - min_size)) + fi + done + + # Test almost maximum size + devlink_resource_size_set "$((size - 128))" kvd "$i" + devlink_reload + log_test "'$i' almost maximize [$((size - 128))]" + + # Test above maximum size + devlink resource set "$DEVLINK_DEV" \ + path "kvd/$i" size $((size + 128)) &> /dev/null + check_fail $? "Set kvd/$i to size $((size + 128)) should fail" + log_test "'$i' Overflow rejection [$((size + 128))]" + + # Test maximum size + if [ "$i" == "hash_single" ] || [ "$i" == "hash_double" ]; then + echo "SKIP: Observed problem with exact max $i" + continue + fi + + devlink_resource_size_set "$size" kvd "$i" + devlink_reload + log_test "'$i' maximize [$size]" + + devlink_sp_size_kvd_to_default + done +} + +profiles_test +resources_min_test +resources_max_test + +exit "$RET" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh new file mode 100644 index 000000000000..8d2186c7c62b --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../mirror_gre_scale.sh + +mirror_gre_get_target() +{ + local should_fail=$1; shift + + if ((! should_fail)); then + echo 3 + else + echo 4 + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh new file mode 100755 index 000000000000..a0a80e1a69e8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -0,0 +1,55 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=6 +source ../../../../net/forwarding/lib.sh +source ../../../../net/forwarding/tc_common.sh +source devlink_lib_spectrum.sh + +current_test="" + +cleanup() +{ + pre_cleanup + if [ ! -z $current_test ]; then + ${current_test}_cleanup + fi + devlink_sp_size_kvd_to_default +} + +devlink_sp_read_kvd_defaults +trap cleanup EXIT + +ALL_TESTS="router tc_flower mirror_gre" +for current_test in ${TESTS:-$ALL_TESTS}; do + source ${current_test}_scale.sh + + num_netifs_var=${current_test^^}_NUM_NETIFS + num_netifs=${!num_netifs_var:-$NUM_NETIFS} + + for profile in $KVD_PROFILES; do + RET=0 + devlink_sp_resource_kvd_profile_set $profile + if [[ $RET -gt 0 ]]; then + log_test "'$current_test' [$profile] setting" + continue + fi + + for should_fail in 0 1; do + RET=0 + target=$(${current_test}_get_target "$should_fail") + ${current_test}_setup_prepare + setup_wait $num_netifs + ${current_test}_test "$target" "$should_fail" + ${current_test}_cleanup + if [[ "$should_fail" -eq 0 ]]; then + log_test "'$current_test' [$profile] $target" + else + log_test "'$current_test' [$profile] overflow $target" + fi + done + done +done +current_test="" + +exit "$RET" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh new file mode 100644 index 000000000000..21c4697d5bab --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../router_scale.sh + +router_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get kvd hash_single) + + if [[ $should_fail -eq 0 ]]; then + target=$((target * 85 / 100)) + else + target=$((target + 1)) + fi + + echo $target +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh new file mode 100644 index 000000000000..f9bfd8937765 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../tc_flower_scale.sh + +tc_flower_get_target() +{ + local should_fail=$1; shift + + # 6144 (6x1024) is the theoretical maximum. + # One bank of 512 rules is taken by the 18-byte MC router rule. + # One rule is the ACL catch-all. + # 6144 - 512 - 1 = 5631 + local target=5631 + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh new file mode 100644 index 000000000000..a6d733d2a4b4 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh @@ -0,0 +1,134 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for resource limit of offloaded flower rules. The test adds a given +# number of flower matches for different IPv6 addresses, then generates traffic, +# and ensures each was hit exactly once. This file contains functions to set up +# a testing topology and run the test, and is meant to be sourced from a test +# script that calls the testing routine with a given number of rules. + +TC_FLOWER_NUM_NETIFS=2 + +tc_flower_h1_create() +{ + simple_if_init $h1 + tc qdisc add dev $h1 clsact +} + +tc_flower_h1_destroy() +{ + tc qdisc del dev $h1 clsact + simple_if_fini $h1 +} + +tc_flower_h2_create() +{ + simple_if_init $h2 + tc qdisc add dev $h2 clsact +} + +tc_flower_h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 +} + +tc_flower_setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + vrf_prepare + + tc_flower_h1_create + tc_flower_h2_create +} + +tc_flower_cleanup() +{ + pre_cleanup + + tc_flower_h2_destroy + tc_flower_h1_destroy + + vrf_cleanup + + if [[ -v TC_FLOWER_BATCH_FILE ]]; then + rm -f $TC_FLOWER_BATCH_FILE + fi +} + +tc_flower_addr() +{ + local num=$1; shift + + printf "2001:db8:1::%x" $num +} + +tc_flower_rules_create() +{ + local count=$1; shift + local should_fail=$1; shift + + TC_FLOWER_BATCH_FILE="$(mktemp)" + + for ((i = 0; i < count; ++i)); do + cat >> $TC_FLOWER_BATCH_FILE <<-EOF + filter add dev $h2 ingress \ + prot ipv6 \ + pref 1000 \ + flower $tcflags dst_ip $(tc_flower_addr $i) \ + action drop + EOF + done + + tc -b $TC_FLOWER_BATCH_FILE + check_err_fail $should_fail $? "Rule insertion" +} + +__tc_flower_test() +{ + local count=$1; shift + local should_fail=$1; shift + local last=$((count - 1)) + + tc_flower_rules_create $count $should_fail + + for ((i = 0; i < count; ++i)); do + $MZ $h1 -q -c 1 -t ip -p 20 -b bc -6 \ + -A 2001:db8:2::1 \ + -B $(tc_flower_addr $i) + done + + MISMATCHES=$( + tc -j -s filter show dev $h2 ingress | + jq -r '[ .[] | select(.kind == "flower") | .options | + values as $rule | .actions[].stats.packets | + select(. != 1) | "\(.) on \($rule.keys.dst_ip)" ] | + join(", ")' + ) + + test -z "$MISMATCHES" + check_err $? "Expected to capture 1 packet for each IP, but got $MISMATCHES" +} + +tc_flower_test() +{ + local count=$1; shift + local should_fail=$1; shift + + # We use lower 16 bits of IPv6 address for match. Also there are only 16 + # bits of rule priority space. + if ((count > 65536)); then + check_err 1 "Invalid count of $count. At most 65536 rules supported" + return + fi + + if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then + check_err 1 "Could not test offloaded functionality" + return + fi + + tcflags="skip_sw" + __tc_flower_test $count $should_fail +} |