Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...

1 files changed, 127 insertions, 11 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7ceed99a05bc..f4ab2fb4d50c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -154,12 +154,14 @@ struct ieee80211_low_level_stats {
  * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
  * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel,
  *	this is used only with channel switching with CSA
+ * @IEEE80211_CHANCTX_CHANGE_MIN_WIDTH: The min required channel width changed
  */
 enum ieee80211_chanctx_change {
 	IEEE80211_CHANCTX_CHANGE_WIDTH		= BIT(0),
 	IEEE80211_CHANCTX_CHANGE_RX_CHAINS	= BIT(1),
 	IEEE80211_CHANCTX_CHANGE_RADAR		= BIT(2),
 	IEEE80211_CHANCTX_CHANGE_CHANNEL	= BIT(3),
+	IEEE80211_CHANCTX_CHANGE_MIN_WIDTH	= BIT(4),
 };
 
 /**
@@ -169,6 +171,7 @@ enum ieee80211_chanctx_change {
  * that contains it is visible in mac80211 only.
  *
  * @def: the channel definition
+ * @min_def: the minimum channel definition currently required.
  * @rx_chains_static: The number of RX chains that must always be
  *	active on the channel to receive MIMO transmissions
  * @rx_chains_dynamic: The number of RX chains that must be enabled
@@ -180,6 +183,7 @@ enum ieee80211_chanctx_change {
  */
 struct ieee80211_chanctx_conf {
 	struct cfg80211_chan_def def;
+	struct cfg80211_chan_def min_def;
 
 	u8 rx_chains_static, rx_chains_dynamic;
 
@@ -1159,6 +1163,19 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
 }
 
 /**
+ * wdev_to_ieee80211_vif - return a vif struct from a wdev
+ * @wdev: the wdev to get the vif for
+ *
+ * This can be used by mac80211 drivers with direct cfg80211 APIs
+ * (like the vendor commands) that get a wdev.
+ *
+ * Note that this function may return %NULL if the given wdev isn't
+ * associated with a vif that the driver knows about (e.g. monitor
+ * or AP_VLAN interfaces.)
+ */
+struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
+
+/**
  * enum ieee80211_key_flags - key flags
  *
  * These flags are used for communication about keys between the driver
@@ -1229,6 +1246,36 @@ struct ieee80211_key_conf {
 };
 
 /**
+ * struct ieee80211_cipher_scheme - cipher scheme
+ *
+ * This structure contains a cipher scheme information defining
+ * the secure packet crypto handling.
+ *
+ * @cipher: a cipher suite selector
+ * @iftype: a cipher iftype bit mask indicating an allowed cipher usage
+ * @hdr_len: a length of a security header used the cipher
+ * @pn_len: a length of a packet number in the security header
+ * @pn_off: an offset of pn from the beginning of the security header
+ * @key_idx_off: an offset of key index byte in the security header
+ * @key_idx_mask: a bit mask of key_idx bits
+ * @key_idx_shift: a bit shift needed to get key_idx
+ *     key_idx value calculation:
+ *      (sec_header_base[key_idx_off] & key_idx_mask) >> key_idx_shift
+ * @mic_len: a mic length in bytes
+ */
+struct ieee80211_cipher_scheme {
+	u32 cipher;
+	u16 iftype;
+	u8 hdr_len;
+	u8 pn_len;
+	u8 pn_off;
+	u8 key_idx_off;
+	u8 key_idx_mask;
+	u8 key_idx_shift;
+	u8 mic_len;
+};
+
+/**
  * enum set_key_cmd - key command
  *
  * Used with the set_key() callback in &struct ieee80211_ops, this
@@ -1566,7 +1613,8 @@ enum ieee80211_hw_flags {
  * @extra_tx_headroom: headroom to reserve in each transmit skb
  *	for use by the driver (e.g. for transmit headers.)
  *
- * @channel_change_time: time (in microseconds) it takes to change channels.
+ * @extra_beacon_tailroom: tailroom to reserve in each beacon tx skb.
+ *	Can be used by drivers to add extra IEs.
  *
  * @max_signal: Maximum value for signal (rssi) in RX information, used
  *	only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB
@@ -1636,6 +1684,10 @@ enum ieee80211_hw_flags {
  * @uapsd_max_sp_len: maximum number of total buffered frames the WMM AP may
  *	deliver to a WMM STA during any Service Period triggered by the WMM STA.
  *	Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct values.
+ *
+ * @n_cipher_schemes: a size of an array of cipher schemes definitions.
+ * @cipher_schemes: a pointer to an array of cipher scheme definitions
+ *	supported by HW.
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -1644,7 +1696,7 @@ struct ieee80211_hw {
 	void *priv;
 	u32 flags;
 	unsigned int extra_tx_headroom;
-	int channel_change_time;
+	unsigned int extra_beacon_tailroom;
 	int vif_data_size;
 	int sta_data_size;
 	int chanctx_data_size;
@@ -1663,6 +1715,8 @@ struct ieee80211_hw {
 	netdev_features_t netdev_features;
 	u8 uapsd_queues;
 	u8 uapsd_max_sp_len;
+	u8 n_cipher_schemes;
+	const struct ieee80211_cipher_scheme *cipher_schemes;
 };
 
 /**
@@ -2065,6 +2119,11 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP)
  * and also take care of the EOSP and MORE_DATA bits in the frame.
  * The driver may also use ieee80211_sta_eosp() in this case.
+ *
+ * Note that if the driver ever buffers frames other than QoS-data
+ * frames, it must take care to never send a non-QoS-data frame as
+ * the last frame in a service period, adding a QoS-nulldata frame
+ * after a non-QoS-data frame if needed.
  */
 
 /**
@@ -2358,9 +2417,6 @@ enum ieee80211_roc_type {
  *	See the section "Frame filtering" for more information.
  *	This callback must be implemented and can sleep.
  *
- * @set_multicast_list: Configure the device's interface specific RX multicast
- *	filter. This callback is optional. This callback must be atomic.
- *
  * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
  * 	must be set or cleared for a given STA. Must be atomic.
  *
@@ -2445,7 +2501,11 @@ enum ieee80211_roc_type {
  *	AP, IBSS/WDS/mesh peer etc. This callback can sleep.
  *
  * @sta_remove: Notifies low level driver about removal of an associated
- *	station, AP, IBSS/WDS/mesh peer etc. This callback can sleep.
+ *	station, AP, IBSS/WDS/mesh peer etc. Note that after the callback
+ *	returns it isn't safe to use the pointer, not even RCU protected;
+ *	no RCU grace period is guaranteed between returning here and freeing
+ *	the station. See @sta_pre_rcu_remove if needed.
+ *	This callback can sleep.
  *
  * @sta_add_debugfs: Drivers can use this callback to add debugfs files
  *	when a station is added to mac80211's station list. This callback
@@ -2464,7 +2524,17 @@ enum ieee80211_roc_type {
  *	station (which can be the AP, a client, IBSS/WDS/mesh peer etc.)
  *	This callback is mutually exclusive with @sta_add/@sta_remove.
  *	It must not fail for down transitions but may fail for transitions
- *	up the list of states.
+ *	up the list of states. Also note that after the callback returns it
+ *	isn't safe to use the pointer, not even RCU protected - no RCU grace
+ *	period is guaranteed between returning here and freeing the station.
+ *	See @sta_pre_rcu_remove if needed.
+ *	The callback can sleep.
+ *
+ * @sta_pre_rcu_remove: Notify driver about station removal before RCU
+ *	synchronisation. This is useful if a driver needs to have station
+ *	pointers protected using RCU, it can then use this call to clear
+ *	the pointers instead of waiting for an RCU grace period to elapse
+ *	in @sta_state.
  *	The callback can sleep.
  *
  * @sta_rc_update: Notifies the driver of changes to the bitrates that can be
@@ -2724,10 +2794,6 @@ struct ieee80211_ops {
 				 unsigned int changed_flags,
 				 unsigned int *total_flags,
 				 u64 multicast);
-	void (*set_multicast_list)(struct ieee80211_hw *hw,
-				   struct ieee80211_vif *vif, bool allmulti,
-				   struct netdev_hw_addr_list *mc_list);
-
 	int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
 		       bool set);
 	int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -2781,6 +2847,9 @@ struct ieee80211_ops {
 			 struct ieee80211_sta *sta,
 			 enum ieee80211_sta_state old_state,
 			 enum ieee80211_sta_state new_state);
+	void (*sta_pre_rcu_remove)(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_sta *sta);
 	void (*sta_rc_update)(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif,
 			      struct ieee80211_sta *sta,
@@ -4585,4 +4654,51 @@ bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif, struct sk_buff *skb,
 			      int band, struct ieee80211_sta **sta);
 
+/**
+ * struct ieee80211_noa_data - holds temporary data for tracking P2P NoA state
+ *
+ * @next_tsf: TSF timestamp of the next absent state change
+ * @has_next_tsf: next absent state change event pending
+ *
+ * @absent: descriptor bitmask, set if GO is currently absent
+ *
+ * private:
+ *
+ * @count: count fields from the NoA descriptors
+ * @desc: adjusted data from the NoA
+ */
+struct ieee80211_noa_data {
+	u32 next_tsf;
+	bool has_next_tsf;
+
+	u8 absent;
+
+	u8 count[IEEE80211_P2P_NOA_DESC_MAX];
+	struct {
+		u32 start;
+		u32 duration;
+		u32 interval;
+	} desc[IEEE80211_P2P_NOA_DESC_MAX];
+};
+
+/**
+ * ieee80211_parse_p2p_noa - initialize NoA tracking data from P2P IE
+ *
+ * @attr: P2P NoA IE
+ * @data: NoA tracking data
+ * @tsf: current TSF timestamp
+ *
+ * Return: number of successfully parsed descriptors
+ */
+int ieee80211_parse_p2p_noa(const struct ieee80211_p2p_noa_attr *attr,
+			    struct ieee80211_noa_data *data, u32 tsf);
+
+/**
+ * ieee80211_update_p2p_noa - get next pending P2P GO absent state change
+ *
+ * @data: NoA tracking data
+ * @tsf: current TSF timestamp
+ */
+void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf);
+
 #endif /* MAC80211_H */