Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 117 insertions, 0 deletions

diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
new file mode 100644
index 000000000000..69a28f96bee2
--- /dev/null
+++ b/include/asm-arm/assembler.h
@@ -0,0 +1,117 @@
+/*
+ *  linux/include/asm-arm/assembler.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains arm architecture specific defines
+ *  for the different processors.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define pull            lsr
+#define push            lsl
+#define get_byte_0      lsl #0
+#define get_byte_1	lsr #8
+#define get_byte_2	lsr #16
+#define get_byte_3	lsr #24
+#define put_byte_0      lsl #0
+#define put_byte_1	lsl #8
+#define put_byte_2	lsl #16
+#define put_byte_3	lsl #24
+#else
+#define pull            lsl
+#define push            lsr
+#define get_byte_0	lsr #24
+#define get_byte_1	lsr #16
+#define get_byte_2	lsr #8
+#define get_byte_3      lsl #0
+#define put_byte_0	lsl #24
+#define put_byte_1	lsl #16
+#define put_byte_2	lsl #8
+#define put_byte_3      lsl #0
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+#define PLD(code...)	code
+#else
+#define PLD(code...)
+#endif
+
+#define MODE_USR	USR_MODE
+#define MODE_FIQ	FIQ_MODE
+#define MODE_IRQ	IRQ_MODE
+#define MODE_SVC	SVC_MODE
+
+#define DEFAULT_FIQ	MODE_FIQ
+
+/*
+ * LOADREGS - ldm with PC in register list (eg, ldmfd sp!, {pc})
+ */
+#ifdef __STDC__
+#define LOADREGS(cond, base, reglist...)\
+	ldm##cond	base,reglist
+#else
+#define LOADREGS(cond, base, reglist...)\
+	ldm/**/cond	base,reglist
+#endif
+
+/*
+ * Build a return instruction for this processor type.
+ */
+#define RETINSTR(instr, regs...)\
+	instr	regs
+
+/*
+ * Save the current IRQ state and disable IRQs.  Note that this macro
+ * assumes FIQs are enabled, and that the processor is in SVC mode.
+ */
+	.macro	save_and_disable_irqs, oldcpsr, temp
+	mrs	\oldcpsr, cpsr
+	mov	\temp, #PSR_I_BIT | MODE_SVC
+	msr	cpsr_c, \temp
+	.endm
+
+/*
+ * Restore interrupt state previously stored in a register.  We don't
+ * guarantee that this will preserve the flags.
+ */
+	.macro	restore_irqs, oldcpsr
+	msr	cpsr_c, \oldcpsr
+	.endm
+
+/*
+ * These two are used to save LR/restore PC over a user-based access.
+ * The old 26-bit architecture requires that we do.  On 32-bit
+ * architecture, we can safely ignore this requirement.
+ */
+	.macro	save_lr
+	.endm
+
+	.macro	restore_pc
+	mov	pc, lr
+	.endm
+
+#define USER(x...)				\
+9999:	x;					\
+	.section __ex_table,"a";		\
+	.align	3;				\
+	.long	9999b,9001f;			\
+	.previous