summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 13:24:47 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 13:24:47 -0700
commit22237d5a588cfad92525d2998ff14d3666399dce (patch)
tree0f76b3a9febe573702669628fadaaab6c5725634 /drivers
parentfc76a258d41eea7953bb763397c3d1e589d3bb98 (diff)
parent6b9a39de73490abb93a0b48a5e6c417c518f3a59 (diff)
Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann: "These are various bug fixes that were not considered important enough for merging into 3.10. The majority of the ARM fixes are for the OMAP and at91 platforms, and there is another set of bug fixes for device drivers that resolve 'randconfig' build errors and that the subsystem maintainers either did not pick up or preferred to get merged through the arm-soc tree." * tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: at91/PMC: use at91_usb_rate() for UTMI PLL ARM: at91/PMC: fix at91sam9n12 USB FS init ARM: at91/PMC: at91sam9n12 family has a PLLB ARM: at91/PMC: sama5d3 family doesn't have a PLLB ARM: tegra: fix section mismatch in tegra_pmc_parse_dt ARM: mxs: don't select HAVE_PWM ARM: mxs: stub out mxs_pm_init for !CONFIG_PM cpuidle: calxeda: select ARM_CPU_SUSPEND ARM: mvebu: fix length of ethernet registers in mv78260 dtsi ARM: at91: cpuidle: Fix target_residency ARM: at91: fix at91_extern_irq usage for non-dt boards ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change X.509: do not emit any informational output mtd: omap2: allow bulding as a module [SCSI] nsp32: use mdelay instead of large udelay constants hwrng: bcm2835: fix MODULE_LICENSE tag ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED ARM: at91: Fix link breakage when !CONFIG_PHYLIB MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/char/hw_random/bcm2835-rng.c2
-rw-r--r--drivers/clk/Makefile2
-rw-r--r--drivers/clocksource/bcm_kona_timer.c15
-rw-r--r--drivers/cpuidle/Kconfig1
-rw-r--r--drivers/gpio/gpio-msm-v1.c2
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/irqchip/irq-renesas-irqc.c4
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/scsi/nsp32.c2
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/ssbi/ssbi.c1
-rw-r--r--drivers/tty/serial/Kconfig2
12 files changed, 16 insertions, 21 deletions
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index eb7f14725ebd..43577ca780e3 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -110,4 +110,4 @@ module_platform_driver(bcm2835_rng_driver);
MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
MODULE_DESCRIPTION("BCM2835 Random Number Generator (RNG) driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 137d3e730f86..f0e46997bb12 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
-obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o
+obj-$(CONFIG_ARCH_SIRF) += clk-prima2.o
obj-$(CONFIG_PLAT_ORION) += mvebu/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 350f49356458..ba3d85904c9a 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -103,16 +103,10 @@ static const struct of_device_id bcm_timer_ids[] __initconst = {
{},
};
-static void __init kona_timers_init(void)
+static void __init kona_timers_init(struct device_node *node)
{
- struct device_node *node;
u32 freq;
- node = of_find_matching_node(NULL, bcm_timer_ids);
-
- if (!node)
- panic("No timer");
-
if (!of_property_read_u32(node, "clock-frequency", &freq))
arch_timer_rate = freq;
else
@@ -199,13 +193,12 @@ static struct irqaction kona_timer_irq = {
.handler = kona_timer_interrupt,
};
-static void __init kona_timer_init(void)
+static void __init kona_timer_init(struct device_node *node)
{
- kona_timers_init();
+ kona_timers_init(node);
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
}
-CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer",
- kona_timer_init);
+CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index c4cc27e5c8a5..e21cdfa4002a 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -36,6 +36,7 @@ if CPU_IDLE
config CPU_IDLE_CALXEDA
bool "CPU Idle Driver for Calxeda processors"
depends on ARCH_HIGHBANK
+ select ARM_CPU_SUSPEND
help
Select this to enable cpuidle on Calxeda processors.
diff --git a/drivers/gpio/gpio-msm-v1.c b/drivers/gpio/gpio-msm-v1.c
index c798585a3fe5..fb2cc90d0134 100644
--- a/drivers/gpio/gpio-msm-v1.c
+++ b/drivers/gpio/gpio-msm-v1.c
@@ -630,7 +630,7 @@ static struct irq_chip msm_gpio_irq_chip = {
.irq_set_type = msm_gpio_irq_set_type,
};
-static int __devinit gpio_msm_v1_probe(struct platform_device *pdev)
+static int gpio_msm_v1_probe(struct platform_device *pdev)
{
int i, j = 0;
const struct platform_device_id *dev_id = platform_get_device_id(pdev);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 631736e2e7ed..73e2e7db2b64 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -685,7 +685,7 @@ config I2C_SIMTEC
config I2C_SIRF
tristate "CSR SiRFprimaII I2C interface"
- depends on ARCH_PRIMA2
+ depends on ARCH_SIRF
help
If you say yes to this option, support will be included for the
CSR SiRFprimaII I2C interface.
diff --git a/drivers/irqchip/irq-renesas-irqc.c b/drivers/irqchip/irq-renesas-irqc.c
index 927bff373aac..2f404ba61c6c 100644
--- a/drivers/irqchip/irq-renesas-irqc.c
+++ b/drivers/irqchip/irq-renesas-irqc.c
@@ -248,8 +248,8 @@ static int irqc_probe(struct platform_device *pdev)
return 0;
err3:
- for (; k >= 0; k--)
- free_irq(p->irq[k - 1].requested_irq, &p->irq[k - 1]);
+ while (--k >= 0)
+ free_irq(p->irq[k].requested_irq, &p->irq[k]);
irq_domain_remove(p->irq_domain);
err2:
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a60f6c17f57b..50543f166215 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -95,7 +95,7 @@ config MTD_NAND_OMAP2
config MTD_NAND_OMAP_BCH
depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
- bool "Enable support for hardware BCH error correction"
+ tristate "Enable support for hardware BCH error correction"
default n
select BCH
select BCH_CONST_PARAMS
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 1e3879dcbdcc..0665f9cfdb02 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
* reset SCSI bus
*/
nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
- udelay(RESET_HOLD_TIME);
+ mdelay(RESET_HOLD_TIME / 1000);
nsp32_write1(base, SCSI_BUS_CONTROL, 0);
for(i = 0; i < 5; i++) {
intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 92a9345d7a6b..10f99f45a29b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -404,7 +404,7 @@ config SPI_SH_HSPI
config SPI_SIRF
tristate "CSR SiRFprimaII SPI controller"
- depends on ARCH_PRIMA2
+ depends on ARCH_SIRF
select SPI_BITBANG
help
SPI driver for CSR SiRFprimaII SoCs
diff --git a/drivers/ssbi/ssbi.c b/drivers/ssbi/ssbi.c
index f32da0258a8e..e561d3be54a5 100644
--- a/drivers/ssbi/ssbi.c
+++ b/drivers/ssbi/ssbi.c
@@ -350,6 +350,7 @@ static struct of_device_id ssbi_match_table[] = {
{ .compatible = "qcom,ssbi" },
{}
};
+MODULE_DEVICE_TABLE(of, ssbi_match_table);
static struct platform_driver ssbi_driver = {
.probe = ssbi_probe,
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 46dd1c72feda..5e3d68917ffe 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -251,7 +251,7 @@ config SERIAL_SAMSUNG_CONSOLE
config SERIAL_SIRFSOC
tristate "SiRF SoC Platform Serial port support"
- depends on ARCH_PRIMA2
+ depends on ARCH_SIRF
select SERIAL_CORE
help
Support for the on-chip UART on the CSR SiRFprimaII series,