diff options
author | Anson Huang <b20788@freescale.com> | 2011-09-05 09:53:56 +0800 |
---|---|---|
committer | Anson Huang <b20788@freescale.com> | 2011-09-05 09:53:56 +0800 |
commit | fff76bb14200d3aa7ec091161b57c967b45a3fc9 (patch) | |
tree | 7ef09156953ddfc5b0038a0651ce5791559940cb /drivers | |
parent | d33eb697d0b97eea8cd02ecaebbb6d2f7684a9ff (diff) |
ENGR00155995 [MX6]Adjust default thermal point
Current thermal reading formula is not accurate,
and different board has different value, previous
setting of trip point setting is too low, and some
boards can reach hot and critical point easily, so
change the trip point as below:
critical : 50 -> 100 C
hot : 40 -> 90 C
active : 30 -> 80 C
these trip points value can also be changed via echo
an value into /sys/class/thermal/thermal_zone0/trip..
Signed-off-by: Anson Huang <b20788@freescale.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mxc/thermal/thermal.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/mxc/thermal/thermal.c b/drivers/mxc/thermal/thermal.c index 84c7a631ed62..6ec7406e8f4b 100644 --- a/drivers/mxc/thermal/thermal.c +++ b/drivers/mxc/thermal/thermal.c @@ -114,9 +114,9 @@ #define _COMPONENT ANATOP_THERMAL_COMPONENT #define KELVIN_OFFSET 273 #define POLLING_FREQ 2000 /* 2s */ -#define TEMP_CRITICAL 323 /* 50 C*/ -#define TEMP_HOT 313 /* 40 C*/ -#define TEMP_ACTIVE 303 /* 30 C*/ +#define TEMP_CRITICAL 373 /* 100 C*/ +#define TEMP_HOT 363 /* 90 C*/ +#define TEMP_ACTIVE 353 /* 80 C*/ #define MEASURE_FREQ 327 /* 327 RTC clocks delay, 10ms */ #define CONVER_CONST 14113 /* need calibration */ #define CONVER_DIV 17259 |