summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:19:05 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:19:05 -0700
commit61464c8357c8f6b780e4c44f5c79471799c51ca7 (patch)
tree4509cf075403965528f380f2f825c46908fb7d4e /drivers
parent47061eda2584b9e4516d1e3a9713406a3a559ac8 (diff)
parent9cf1c871526cf6bfec2a653e1e068ee72592542c (diff)
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/dma/omap-dma.c2
-rw-r--r--drivers/gpio/gpio-omap.c15
-rw-r--r--drivers/gpio/gpio-samsung.c40
-rw-r--r--drivers/gpio/gpio-tegra.c3
-rw-r--r--drivers/gpio/gpio-twl4030.c15
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c121
-rw-r--r--drivers/input/keyboard/Kconfig2
-rw-r--r--drivers/input/keyboard/omap-keypad.c156
-rw-r--r--drivers/input/mouse/rpcmouse.c2
-rw-r--r--drivers/input/serio/ams_delta_serio.c2
-rw-r--r--drivers/media/video/omap/omap_vout.c1
-rw-r--r--drivers/media/video/omap3isp/isp.c2
-rw-r--r--drivers/mfd/twl-core.c54
-rw-r--r--drivers/mmc/host/omap.c2
-rw-r--r--drivers/mmc/host/omap_hsmmc.c1
-rw-r--r--drivers/mmc/host/sdhci-tegra.c1
-rw-r--r--drivers/mtd/nand/ams-delta.c10
-rw-r--r--drivers/mtd/nand/bcm_umi_nand.c12
-rw-r--r--drivers/mtd/nand/nand_bcm_umi.h73
-rw-r--r--drivers/mtd/nand/omap2.c303
-rw-r--r--drivers/mtd/onenand/omap2.c34
-rw-r--r--drivers/net/ethernet/seeq/ether3.c4
-rw-r--r--drivers/pcmcia/omap_cf.c2
-rw-r--r--drivers/pinctrl/pinctrl-coh901.c220
-rw-r--r--drivers/power/avs/smartreflex.c2
-rw-r--r--drivers/remoteproc/omap_remoteproc.c2
-rw-r--r--drivers/scsi/arm/eesox.c2
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/spi/spi-omap-uwire.c5
-rw-r--r--drivers/spi/spi-omap2-mcspi.c2
-rw-r--r--drivers/spi/spi-tegra.c55
-rw-r--r--drivers/staging/tidspbridge/core/dsp-clock.c2
-rw-r--r--drivers/staging/tidspbridge/core/tiomap3430.c2
-rw-r--r--drivers/staging/tidspbridge/core/tiomap3430_pwr.c2
-rw-r--r--drivers/staging/tidspbridge/core/tiomap_io.c2
-rw-r--r--drivers/staging/tidspbridge/core/wdt.c2
-rw-r--r--drivers/staging/tidspbridge/rmgr/drv_interface.c2
-rw-r--r--drivers/tty/serial/serial_ks8695.c4
-rw-r--r--drivers/usb/Kconfig1
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/host/ohci-nxp.c84
-rw-r--r--drivers/usb/host/ohci-omap.c2
-rw-r--r--drivers/usb/musb/tusb6010_omap.c1
-rw-r--r--drivers/usb/otg/isp1301_omap.c2
-rw-r--r--drivers/video/backlight/omap1_bl.c4
-rw-r--r--drivers/video/da8xx-fb.c8
-rw-r--r--drivers/video/omap/lcd_ams_delta.c3
-rw-r--r--drivers/video/omap/lcd_mipid.c2
-rw-r--r--drivers/video/omap/lcd_osk.c2
-rw-r--r--drivers/video/omap2/dss/dispc.c1
-rw-r--r--drivers/video/omap2/omapfb/omapfb-main.c1
-rw-r--r--drivers/watchdog/Kconfig6
-rw-r--r--drivers/watchdog/ks8695_wdt.c14
-rw-r--r--drivers/watchdog/omap_wdt.c5
56 files changed, 547 insertions, 758 deletions
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index ae0561826137..2e1662777661 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -18,6 +18,8 @@
#include <linux/spinlock.h>
#include "virt-dma.h"
+
+#include <plat/cpu.h>
#include <plat/dma.h>
struct omap_dmadev {
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0725d181581f..94cbc842fbc3 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,11 +25,9 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/irqdomain.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/gpio.h>
#include <asm/mach/irq.h>
#define OFF_MODE 1
@@ -385,13 +383,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio,
static int gpio_irq_type(struct irq_data *d, unsigned type)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned gpio;
+ unsigned gpio = 0;
int retval;
unsigned long flags;
- if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
+#ifdef CONFIG_ARCH_OMAP1
+ if (d->irq > IH_MPUIO_BASE)
gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- else
+#endif
+
+ if (!gpio)
gpio = irq_to_gpio(bank, d->irq);
if (type & ~IRQ_TYPE_SENSE_MASK)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index ba126cc04073..1c169324e357 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -3131,46 +3131,6 @@ samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
}
EXPORT_SYMBOL(s3c_gpio_getpull);
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
- int ret;
-
- WARN_ON(to); /* should be none of these left */
-
- if (!to) {
- /* if pull is enabled, try first with up, and if that
- * fails, try using down */
-
- ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
- if (ret)
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
- } else {
- s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
- }
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- /* do this via gpiolib until all users removed */
-
- gpio_request(pin, "temporary");
- gpio_set_value(pin, to);
- gpio_free(pin);
-}
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
-
- return __raw_readl(chip->base + 0x04) & (1 << offs);
-}
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index dc5184d57892..d982593d7563 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -30,9 +30,6 @@
#include <asm/mach/irq.h>
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
#define GPIO_BANK(x) ((x) >> 5)
#define GPIO_PORT(x) (((x) >> 3) & 0x3)
#define GPIO_BIT(x) ((x) & 0x7)
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe7bf36..f030880bc9bb 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -51,6 +51,7 @@
static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
static int twl4030_gpio_irq_base;
/* genirq interfaces are not available to modules */
@@ -428,8 +429,6 @@ no_irqs:
twl_gpiochip.dev = &pdev->dev;
if (pdata) {
- twl_gpiochip.base = pdata->gpio_base;
-
/*
* NOTE: boards may waste power if they don't set pullups
* and pulldowns correctly ... default for non-ULPI pins is
@@ -461,15 +460,21 @@ no_irqs:
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
twl_gpiochip.ngpio = 0;
gpio_twl4030_remove(pdev);
- } else if (pdata && pdata->setup) {
+ goto out;
+ }
+
+ twl4030_gpio_base = twl_gpiochip.base;
+
+ if (pdata && pdata->setup) {
int status;
status = pdata->setup(&pdev->dev,
- pdata->gpio_base, TWL4030_GPIO_MAX);
+ twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status)
dev_dbg(&pdev->dev, "setup --> %d\n", status);
}
+out:
return ret;
}
@@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
if (pdata && pdata->teardown) {
status = pdata->teardown(&pdev->dev,
- pdata->gpio_base, TWL4030_GPIO_MAX);
+ twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status) {
dev_dbg(&pdev->dev, "teardown --> %d\n", status);
return status;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 970a1612e795..42d9fdd63de0 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -551,7 +551,7 @@ config I2C_PMCMSP
config I2C_PNX
tristate "I2C bus support for Philips PNX and NXP LPC targets"
- depends on ARCH_PNX4008 || ARCH_LPC32XX
+ depends on ARCH_LPC32XX
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 93f147a96b62..2f99613fd677 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -4,13 +4,13 @@
/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
* <Peter dot Milne at D hyphen TACQ dot com>
*
- * With acknowledgements to i2c-algo-ibm_ocp.c by
+ * With acknowledgements to i2c-algo-ibm_ocp.c by
* Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
*
* And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
*
* Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
- *
+ *
* And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
* Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
*
@@ -39,14 +39,15 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include "i2c-iop3xx.h"
/* global unit counter */
static int i2c_id;
-static inline unsigned char
-iic_cook_addr(struct i2c_msg *msg)
+static inline unsigned char
+iic_cook_addr(struct i2c_msg *msg)
{
unsigned char addr;
@@ -55,38 +56,38 @@ iic_cook_addr(struct i2c_msg *msg)
if (msg->flags & I2C_M_RD)
addr |= 1;
- return addr;
+ return addr;
}
-static void
+static void
iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
/* Follows devman 9.3 */
__raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
__raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
-}
+}
-static void
+static void
iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;
- /*
+ /*
* Every time unit enable is asserted, GPOD needs to be cleared
* on IOP3XX to avoid data corruption on the bus.
*/
#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
if (iop3xx_adap->id == 0) {
- gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
- gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
+ gpio_set_value(7, 0);
+ gpio_set_value(6, 0);
} else {
- gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
- gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
+ gpio_set_value(5, 0);
+ gpio_set_value(4, 0);
}
#endif
/* NB SR bits not same position as CR IE bits :-( */
- iop3xx_adap->SR_enabled =
+ iop3xx_adap->SR_enabled =
IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;
@@ -96,23 +97,23 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}
-static void
+static void
iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
-
- cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
+
+ cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);
__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}
-/*
- * NB: the handler has to clear the source of the interrupt!
+/*
+ * NB: the handler has to clear the source of the interrupt!
* Then it passes the SR flags of interest to BH via adap data
*/
-static irqreturn_t
-iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
+static irqreturn_t
+iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);
@@ -126,7 +127,7 @@ iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
}
/* check all error conditions, clear them , report most important */
-static int
+static int
iop3xx_i2c_error(u32 sr)
{
int rc = 0;
@@ -135,12 +136,12 @@ iop3xx_i2c_error(u32 sr)
if ( !rc ) rc = -I2C_ERR_BERR;
}
if ((sr & IOP3XX_ISR_ALD)) {
- if ( !rc ) rc = -I2C_ERR_ALD;
+ if ( !rc ) rc = -I2C_ERR_ALD;
}
- return rc;
+ return rc;
}
-static inline u32
+static inline u32
iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
unsigned long flags;
@@ -161,8 +162,8 @@ iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
typedef int (* compare_func)(unsigned test, unsigned mask);
/* returns 1 on correct comparison */
-static int
-iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
+static int
+iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
unsigned flags, unsigned* status,
compare_func compare)
{
@@ -192,47 +193,47 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
}
/*
- * Concrete compare_funcs
+ * Concrete compare_funcs
*/
-static int
+static int
all_bits_clear(unsigned test, unsigned mask)
{
return (test & mask) == 0;
}
-static int
+static int
any_bits_set(unsigned test, unsigned mask)
{
return (test & mask) != 0;
}
-static int
+static int
iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
- iop3xx_adap,
+ return iop3xx_i2c_wait_event(
+ iop3xx_adap,
IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
status, any_bits_set);
}
-static int
+static int
iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
- iop3xx_adap,
+ return iop3xx_i2c_wait_event(
+ iop3xx_adap,
IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
status, any_bits_set);
}
-static int
+static int
iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
- return iop3xx_i2c_wait_event(
+ return iop3xx_i2c_wait_event(
iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
}
-static int
-iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
+static int
+iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
struct i2c_msg* msg)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -247,7 +248,7 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
}
__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);
-
+
cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;
@@ -257,8 +258,8 @@ iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
return rc;
}
-static int
-iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
+static int
+iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
int stop)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -277,10 +278,10 @@ iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);
return rc;
-}
+}
-static int
-iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
+static int
+iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
int stop)
{
unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
@@ -304,19 +305,19 @@ iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte,
return rc;
}
-static int
+static int
iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
int ii;
int rc = 0;
- for (ii = 0; rc == 0 && ii != count; ++ii)
+ for (ii = 0; rc == 0 && ii != count; ++ii)
rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1);
return rc;
}
-static int
+static int
iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
@@ -325,7 +326,7 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
for (ii = 0; rc == 0 && ii != count; ++ii)
rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
-
+
return rc;
}
@@ -336,8 +337,8 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
* Each transfer (i.e. a read or a write) is separated by a repeated start
* condition.
*/
-static int
-iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
+static int
+iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
int rc;
@@ -357,8 +358,8 @@ iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg)
/*
* master_xfer() - main read/write entry
*/
-static int
-iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+static int
+iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
int num)
{
struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
@@ -375,14 +376,14 @@ iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
}
iop3xx_i2c_transaction_cleanup(iop3xx_adap);
-
+
if(ret)
return ret;
- return im;
+ return im;
}
-static u32
+static u32
iop3xx_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -393,11 +394,11 @@ static const struct i2c_algorithm iop3xx_i2c_algo = {
.functionality = iop3xx_i2c_func,
};
-static int
+static int
iop3xx_i2c_remove(struct platform_device *pdev)
{
struct i2c_adapter *padapter = platform_get_drvdata(pdev);
- struct i2c_algo_iop3xx_data *adapter_data =
+ struct i2c_algo_iop3xx_data *adapter_data =
(struct i2c_algo_iop3xx_data *)padapter->algo_data;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);
@@ -419,7 +420,7 @@ iop3xx_i2c_remove(struct platform_device *pdev)
return 0;
}
-static int
+static int
iop3xx_i2c_probe(struct platform_device *pdev)
{
struct resource *res;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c50fa75416f8..b4b65af8612a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -533,7 +533,7 @@ config KEYBOARD_DAVINCI
config KEYBOARD_OMAP
tristate "TI OMAP keypad support"
- depends on (ARCH_OMAP1 || ARCH_OMAP2)
+ depends on ARCH_OMAP1
select INPUT_MATRIXKMAP
help
Say Y here if you want to use the OMAP keypad.
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a0222db4dc86..6d6b1427ae12 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,13 +35,9 @@
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/slab.h>
-#include <asm/gpio.h>
-#include <plat/keypad.h>
-#include <plat/menelaus.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <plat/mux.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/keypad-omap.h>
#undef NEW_BOARD_LEARNING_MODE
@@ -96,28 +92,8 @@ static u8 get_row_gpio_val(struct omap_kp *omap_kp)
static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
{
- struct omap_kp *omap_kp = dev_id;
-
/* disable keyboard interrupt and schedule for handling */
- if (cpu_is_omap24xx()) {
- int i;
-
- for (i = 0; i < omap_kp->rows; i++) {
- int gpio_irq = gpio_to_irq(row_gpios[i]);
- /*
- * The interrupt which we're currently handling should
- * be disabled _nosync() to avoid deadlocks waiting
- * for this handler to complete. All others should
- * be disabled the regular way for SMP safety.
- */
- if (gpio_irq == irq)
- disable_irq_nosync(gpio_irq);
- else
- disable_irq(gpio_irq);
- }
- } else
- /* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
tasklet_schedule(&kp_tasklet);
@@ -133,33 +109,22 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
{
int col = 0;
- /* read the keypad status */
- if (cpu_is_omap24xx()) {
- /* read the keypad status */
- for (col = 0; col < omap_kp->cols; col++) {
- set_col_gpio_val(omap_kp, ~(1 << col));
- state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff;
- }
- set_col_gpio_val(omap_kp, 0);
-
- } else {
- /* disable keyboard interrupt and schedule for handling */
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ /* disable keyboard interrupt and schedule for handling */
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- /* read the keypad status */
- omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- for (col = 0; col < omap_kp->cols; col++) {
- omap_writew(~(1 << col) & 0xff,
- OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ /* read the keypad status */
+ omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ for (col = 0; col < omap_kp->cols; col++) {
+ omap_writew(~(1 << col) & 0xff,
+ OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- udelay(omap_kp->delay);
+ udelay(omap_kp->delay);
- state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
- OMAP_MPUIO_KBR_LATCH) & 0xff;
- }
- omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
- udelay(2);
+ state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
+ OMAP_MPUIO_KBR_LATCH) & 0xff;
}
+ omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
+ udelay(2);
}
static void omap_kp_tasklet(unsigned long data)
@@ -222,14 +187,8 @@ static void omap_kp_tasklet(unsigned long data)
mod_timer(&omap_kp_data->timer, jiffies + delay);
} else {
/* enable interrupts */
- if (cpu_is_omap24xx()) {
- int i;
- for (i = 0; i < omap_kp_data->rows; i++)
- enable_irq(gpio_to_irq(row_gpios[i]));
- } else {
- omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- kp_cur_group = -1;
- }
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ kp_cur_group = -1;
}
}
@@ -242,6 +201,7 @@ static ssize_t omap_kp_enable_show(struct device *dev,
static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct omap_kp *omap_kp = dev_get_drvdata(dev);
int state;
if (sscanf(buf, "%u", &state) != 1)
@@ -253,9 +213,9 @@ static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute
mutex_lock(&kp_enable_mutex);
if (state != kp_enable) {
if (state)
- enable_irq(INT_KEYBOARD);
+ enable_irq(omap_kp->irq);
else
- disable_irq(INT_KEYBOARD);
+ disable_irq(omap_kp->irq);
kp_enable = state;
}
mutex_unlock(&kp_enable_mutex);
@@ -289,7 +249,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
struct omap_kp *omap_kp;
struct input_dev *input_dev;
struct omap_kp_platform_data *pdata = pdev->dev.platform_data;
- int i, col_idx, row_idx, irq_idx, ret;
+ int i, col_idx, row_idx, ret;
unsigned int row_shift, keycodemax;
if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
@@ -314,8 +274,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
omap_kp->input = input_dev;
/* Disable the interrupt for the MPUIO keyboard */
- if (!cpu_is_omap24xx())
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
if (pdata->delay)
omap_kp->delay = pdata->delay;
@@ -328,31 +287,8 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
omap_kp->rows = pdata->rows;
omap_kp->cols = pdata->cols;
- if (cpu_is_omap24xx()) {
- /* Cols: outputs */
- for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
- if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
- col_gpios[col_idx]);
- goto err1;
- }
- gpio_direction_output(col_gpios[col_idx], 0);
- }
- /* Rows: inputs */
- for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
- if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) {
- printk(KERN_ERR "Failed to request"
- "GPIO%d for keypad\n",
- row_gpios[row_idx]);
- goto err2;
- }
- gpio_direction_input(row_gpios[row_idx]);
- }
- } else {
- col_idx = 0;
- row_idx = 0;
- }
+ col_idx = 0;
+ row_idx = 0;
setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp);
@@ -394,27 +330,16 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
/* scan current status and enable interrupt */
omap_kp_scan_keypad(omap_kp, keypad_state);
- if (!cpu_is_omap24xx()) {
- omap_kp->irq = platform_get_irq(pdev, 0);
- if (omap_kp->irq >= 0) {
- if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
- "omap-keypad", omap_kp) < 0)
- goto err4;
- }
- omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- } else {
- for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
- if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
- omap_kp_interrupt,
- IRQF_TRIGGER_FALLING,
- "omap-keypad", omap_kp) < 0)
- goto err5;
- }
+ omap_kp->irq = platform_get_irq(pdev, 0);
+ if (omap_kp->irq >= 0) {
+ if (request_irq(omap_kp->irq, omap_kp_interrupt, 0,
+ "omap-keypad", omap_kp) < 0)
+ goto err4;
}
+ omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+
return 0;
-err5:
- for (i = irq_idx - 1; i >=0; i--)
- free_irq(row_gpios[i], omap_kp);
+
err4:
input_unregister_device(omap_kp->input);
input_dev = NULL;
@@ -423,7 +348,6 @@ err3:
err2:
for (i = row_idx - 1; i >=0; i--)
gpio_free(row_gpios[i]);
-err1:
for (i = col_idx - 1; i >=0; i--)
gpio_free(col_gpios[i]);
@@ -439,18 +363,8 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
/* disable keypad interrupt handling */
tasklet_disable(&kp_tasklet);
- if (cpu_is_omap24xx()) {
- int i;
- for (i = 0; i < omap_kp->cols; i++)
- gpio_free(col_gpios[i]);
- for (i = 0; i < omap_kp->rows; i++) {
- gpio_free(row_gpios[i]);
- free_irq(gpio_to_irq(row_gpios[i]), omap_kp);
- }
- } else {
- omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- free_irq(omap_kp->irq, omap_kp);
- }
+ omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+ free_irq(omap_kp->irq, omap_kp);
del_timer_sync(&omap_kp->timer);
tasklet_kill(&kp_tasklet);
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 272deddc8db6..21c60fea5d31 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -42,7 +42,7 @@ static irqreturn_t rpcmouse_irq(int irq, void *dev_id)
x = (short) iomd_readl(IOMD_MOUSEX);
y = (short) iomd_readl(IOMD_MOUSEY);
- b = (short) (__raw_readl(0xe0310000) ^ 0x70);
+ b = (short) (__raw_readl(IOMEM(0xe0310000)) ^ 0x70);
dx = x - rpcmouse_lastx;
dy = y - rpcmouse_lasty;
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index f5fbdf94de3b..45887e31242a 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -27,7 +27,7 @@
#include <linux/module.h>
#include <asm/mach-types.h>
-#include <plat/board-ams-delta.h>
+#include <mach/board-ams-delta.h>
#include <mach/ams-delta-fiq.h>
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 88cf9d952631..409da0f8e5cf 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -44,6 +44,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
+#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/vrfb.h>
#include <video/omapdss.h>
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 1c347633e663..43e61fe5df50 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -70,6 +70,8 @@
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
+#include <plat/cpu.h>
+
#include "isp.h"
#include "ispreg.h"
#include "ispccdc.h"
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 1c32afed28aa..9d3a0bc1a65f 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1132,12 +1132,7 @@ static void clocks_init(struct device *dev,
u32 rate;
u8 ctrl = HFCLK_FREQ_26_MHZ;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap2430())
- osc = clk_get(dev, "osc_ck");
- else
- osc = clk_get(dev, "osc_sys_ck");
-
+ osc = clk_get(dev, "fck");
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl internal clock init and "
"using bootloader value (unknown osc rate)\n");
@@ -1147,18 +1142,6 @@ static void clocks_init(struct device *dev,
rate = clk_get_rate(osc);
clk_put(osc);
-#else
- /* REVISIT for non-OMAP systems, pass the clock rate from
- * board init code, using platform_data.
- */
- osc = ERR_PTR(-EIO);
-
- printk(KERN_WARNING "Skipping twl internal clock init and "
- "using bootloader value (unknown osc rate)\n");
-
- return;
-#endif
-
switch (rate) {
case 19200000:
ctrl = HFCLK_FREQ_19p2_MHZ;
@@ -1220,10 +1203,23 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct twl4030_platform_data *pdata = client->dev.platform_data;
struct device_node *node = client->dev.of_node;
+ struct platform_device *pdev;
int irq_base = 0;
int status;
unsigned i, num_slaves;
+ pdev = platform_device_alloc(DRIVER_NAME, -1);
+ if (!pdev) {
+ dev_err(&client->dev, "can't alloc pdev\n");
+ return -ENOMEM;
+ }
+
+ status = platform_device_add(pdev);
+ if (status) {
+ platform_device_put(pdev);
+ return status;
+ }
+
if (node && !pdata) {
/*
* XXX: Temporary pdata until the information is correctly
@@ -1232,23 +1228,30 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
pdata = devm_kzalloc(&client->dev,
sizeof(struct twl4030_platform_data),
GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+ if (!pdata) {
+ status = -ENOMEM;
+ goto free;
+ }
}
if (!pdata) {
dev_dbg(&client->dev, "no platform data?\n");
- return -EINVAL;
+ status = -EINVAL;
+ goto free;
}
+ platform_set_drvdata(pdev, pdata);
+
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
- return -EIO;
+ status = -EIO;
+ goto free;
}
if (inuse) {
dev_dbg(&client->dev, "driver is already in use\n");
- return -EBUSY;
+ status = -EBUSY;
+ goto free;
}
if ((id->driver_data) & TWL6030_CLASS) {
@@ -1283,7 +1286,7 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
inuse = true;
/* setup clock framework */
- clocks_init(&client->dev, pdata->clock);
+ clocks_init(&pdev->dev, pdata->clock);
/* read TWL IDCODE Register */
if (twl_id == TWL4030_CLASS_ID) {
@@ -1333,6 +1336,9 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
fail:
if (status < 0)
twl_remove(client);
+free:
+ if (status < 0)
+ platform_device_unregister(pdev);
return status;
}
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a5999a74496a..c6259a829544 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -33,11 +33,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <plat/board.h>
#include <plat/mmc.h>
#include <asm/gpio.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 8e2d81f1ee4b..38adc330c007 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -40,7 +40,6 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
-#include <plat/board.h>
#include <plat/mmc.h>
#include <plat/cpu.h>
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 0810ccc23d7e..5393c64de3c8 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -27,7 +27,6 @@
#include <asm/gpio.h>
-#include <mach/gpio-tegra.h>
#include <mach/sdhci.h>
#include "sdhci-pltfm.h"
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 861ca8f7e47d..a7040af08536 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -23,11 +23,15 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
#include <asm/io.h>
-#include <mach/hardware.h>
#include <asm/sizes.h>
-#include <linux/gpio.h>
-#include <plat/board-ams-delta.h>
+
+#include <mach/board-ams-delta.h>
+
+#include <mach/hardware.h>
/*
* MTD structure for E3 (Delta)
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index c855e7cd337b..d0d1bd4d0e7d 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -249,20 +249,20 @@ static int nand_dev_ready(struct mtd_info *mtd)
int bcm_umi_nand_inithw(void)
{
/* Configure nand timing parameters */
- REG_UMI_NAND_TCR &= ~0x7ffff;
- REG_UMI_NAND_TCR |= HW_CFG_NAND_TCR;
+ writel(readl(&REG_UMI_NAND_TCR) & ~0x7ffff, &REG_UMI_NAND_TCR);
+ writel(readl(&REG_UMI_NAND_TCR) | HW_CFG_NAND_TCR, &REG_UMI_NAND_TCR);
#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS)
/* enable software control of CS */
- REG_UMI_NAND_TCR |= REG_UMI_NAND_TCR_CS_SWCTRL;
+ writel(readl(&REG_UMI_NAND_TCR) | REG_UMI_NAND_TCR_CS_SWCTRL, &REG_UMI_NAND_TCR);
#endif
/* keep NAND chip select asserted */
- REG_UMI_NAND_RCSR |= REG_UMI_NAND_RCSR_CS_ASSERTED;
+ writel(readl(&REG_UMI_NAND_RCSR) | REG_UMI_NAND_RCSR_CS_ASSERTED, &REG_UMI_NAND_RCSR);
- REG_UMI_NAND_TCR &= ~REG_UMI_NAND_TCR_WORD16;
+ writel(readl(&REG_UMI_NAND_TCR) & ~REG_UMI_NAND_TCR_WORD16, &REG_UMI_NAND_TCR);
/* enable writes to flash */
- REG_UMI_MMD_ICR |= REG_UMI_MMD_ICR_FLASH_WP;
+ writel(readl(&REG_UMI_MMD_ICR) | REG_UMI_MMD_ICR_FLASH_WP, &REG_UMI_MMD_ICR);
writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET);
nand_bcm_umi_wait_till_ready();
diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h
index 198b304d6f72..d90186684db8 100644
--- a/drivers/mtd/nand/nand_bcm_umi.h
+++ b/drivers/mtd/nand/nand_bcm_umi.h
@@ -17,7 +17,7 @@
/* ---- Include Files ---------------------------------------------------- */
#include <mach/reg_umi.h>
#include <mach/reg_nand.h>
-#include <cfg_global.h>
+#include <mach/cfg_global.h>
/* ---- Constants and Types ---------------------------------------------- */
#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING)
@@ -48,7 +48,7 @@ int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData,
/* Check in device is ready */
static inline int nand_bcm_umi_dev_ready(void)
{
- return REG_UMI_NAND_RCSR & REG_UMI_NAND_RCSR_RDY;
+ return readl(&REG_UMI_NAND_RCSR) & REG_UMI_NAND_RCSR_RDY;
}
/* Wait until device is ready */
@@ -62,10 +62,11 @@ static inline void nand_bcm_umi_wait_till_ready(void)
static inline void nand_bcm_umi_hamming_enable_hwecc(void)
{
/* disable and reset ECC, 512 byte page */
- REG_UMI_NAND_ECC_CSR &= ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
- REG_UMI_NAND_ECC_CSR_256BYTE);
+ writel(readl(&REG_UMI_NAND_ECC_CSR) & ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE |
+ REG_UMI_NAND_ECC_CSR_256BYTE), &REG_UMI_NAND_ECC_CSR);
/* enable ECC */
- REG_UMI_NAND_ECC_CSR |= REG_UMI_NAND_ECC_CSR_ECC_ENABLE;
+ writel(readl(&REG_UMI_NAND_ECC_CSR) | REG_UMI_NAND_ECC_CSR_ECC_ENABLE,
+ &REG_UMI_NAND_ECC_CSR);
}
#if NAND_ECC_BCH
@@ -76,18 +77,18 @@ static inline void nand_bcm_umi_hamming_enable_hwecc(void)
static inline void nand_bcm_umi_bch_enable_read_hwecc(void)
{
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, &REG_UMI_BCH_CTRL_STATUS);
/* Turn on ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, &REG_UMI_BCH_CTRL_STATUS);
}
/* Enable BCH Write ECC */
static inline void nand_bcm_umi_bch_enable_write_hwecc(void)
{
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID, &REG_UMI_BCH_CTRL_STATUS);
/* Turn on ECC */
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN, &REG_UMI_BCH_CTRL_STATUS);
}
/* Config number of BCH ECC bytes */
@@ -99,9 +100,9 @@ static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes)
uint32_t numBits = numEccBytes * 8;
/* disable and reset ECC */
- REG_UMI_BCH_CTRL_STATUS =
- REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
- REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID;
+ writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID |
+ REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID,
+ &REG_UMI_BCH_CTRL_STATUS);
/* Every correctible bit requires 13 ECC bits */
tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT);
@@ -113,23 +114,21 @@ static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes)
kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT);
/* Write the settings */
- REG_UMI_BCH_N = nValue;
- REG_UMI_BCH_T = tValue;
- REG_UMI_BCH_K = kValue;
+ writel(nValue, &REG_UMI_BCH_N);
+ writel(tValue, &REG_UMI_BCH_T);
+ writel(kValue, &REG_UMI_BCH_K);
}
/* Pause during ECC read calculation to skip bytes in OOB */
static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void)
{
- REG_UMI_BCH_CTRL_STATUS =
- REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN |
- REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC, &REG_UMI_BCH_CTRL_STATUS);
}
/* Resume during ECC read calculation after skipping bytes in OOB */
static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void)
{
- REG_UMI_BCH_CTRL_STATUS = REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN;
+ writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, &REG_UMI_BCH_CTRL_STATUS);
}
/* Poll read ECC calc to check when hardware completes */
@@ -139,7 +138,7 @@ static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void)
do {
/* wait for ECC to be valid */
- regVal = REG_UMI_BCH_CTRL_STATUS;
+ regVal = readl(&REG_UMI_BCH_CTRL_STATUS);
} while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0);
return regVal;
@@ -149,7 +148,7 @@ static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void)
static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void)
{
/* wait for ECC to be valid */
- while ((REG_UMI_BCH_CTRL_STATUS & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
+ while ((readl(&REG_UMI_BCH_CTRL_STATUS) & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID)
== 0)
;
}
@@ -170,9 +169,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
if (pageSize != NAND_DATA_ACCESS_SIZE) {
/* skip BI */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(&REG_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(&REG_NAND_DATA8);
#endif
numToRead--;
}
@@ -180,9 +179,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
while (numToRead > numEccBytes) {
/* skip free oob region */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(&REG_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(&REG_NAND_DATA8);
#endif
numToRead--;
}
@@ -193,11 +192,11 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
while (numToRead > 11) {
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
+ *oobp = readb(&REG_NAND_DATA8);
eccCalc[eccPos++] = *oobp;
oobp++;
#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
+ eccCalc[eccPos++] = readb(&REG_NAND_DATA8);
#endif
numToRead--;
}
@@ -207,9 +206,9 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
if (numToRead == 11) {
/* read BI */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = readb(&REG_NAND_DATA8);
#else
- REG_NAND_DATA8;
+ readb(&REG_NAND_DATA8);
#endif
numToRead--;
}
@@ -219,11 +218,11 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
nand_bcm_umi_bch_resume_read_ecc_calc();
while (numToRead) {
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
+ *oobp = readb(&REG_NAND_DATA8);
eccCalc[eccPos++] = *oobp;
oobp++;
#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
+ eccCalc[eccPos++] = readb(&REG_NAND_DATA8);
#endif
numToRead--;
}
@@ -255,7 +254,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
if (pageSize == NAND_DATA_ACCESS_SIZE) {
/* Now fill in the ECC bytes */
if (numEccBytes >= 13)
- eccVal = REG_UMI_BCH_WR_ECC_3;
+ eccVal = readl(&REG_UMI_BCH_WR_ECC_3);
/* Usually we skip CM in oob[0,1] */
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0],
@@ -268,7 +267,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
eccVal & 0xff); /* ECC 12 */
if (numEccBytes >= 9)
- eccVal = REG_UMI_BCH_WR_ECC_2;
+ eccVal = readl(&REG_UMI_BCH_WR_ECC_2);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3],
(eccVal >> 24) & 0xff); /* ECC11 */
@@ -281,7 +280,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
/* Now fill in the ECC bytes */
if (numEccBytes >= 13)
- eccVal = REG_UMI_BCH_WR_ECC_3;
+ eccVal = readl(&REG_UMI_BCH_WR_ECC_3);
/* Usually skip CM in oob[1,2] */
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1],
@@ -294,7 +293,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
eccVal & 0xff); /* ECC12 */
if (numEccBytes >= 9)
- eccVal = REG_UMI_BCH_WR_ECC_2;
+ eccVal = readl(&REG_UMI_BCH_WR_ECC_2);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4],
(eccVal >> 24) & 0xff); /* ECC11 */
@@ -309,7 +308,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
eccVal & 0xff); /* ECC8 */
if (numEccBytes >= 5)
- eccVal = REG_UMI_BCH_WR_ECC_1;
+ eccVal = readl(&REG_UMI_BCH_WR_ECC_1);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8],
(eccVal >> 24) & 0xff); /* ECC7 */
@@ -321,7 +320,7 @@ static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize,
eccVal & 0xff); /* ECC4 */
if (numEccBytes >= 1)
- eccVal = REG_UMI_BCH_WR_ECC_0;
+ eccVal = readl(&REG_UMI_BCH_WR_ECC_0);
NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12],
(eccVal >> 24) & 0xff); /* ECC3 */
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ac4fd756eda3..fc8111278d12 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -29,7 +29,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
#define OMAP_NAND_TIMEOUT_MS 5000
@@ -101,6 +101,16 @@
#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
+#define PREFETCH_CONFIG1_CS_SHIFT 24
+#define ECC_CONFIG_CS_SHIFT 1
+#define CS_MASK 0x7
+#define ENABLE_PREFETCH (0x1 << 7)
+#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE1_SHIFT 22
+#define ECC1RESULTSIZE 0x1
+#define ECCCLEAR 0x100
+#define ECC1 0x1
+
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
/* Define some generic bad / good block scan pattern which are used
@@ -124,15 +134,18 @@ struct omap_nand_info {
int gpmc_cs;
unsigned long phys_base;
+ unsigned long mem_size;
struct completion comp;
struct dma_chan *dma;
- int gpmc_irq;
+ int gpmc_irq_fifo;
+ int gpmc_irq_count;
enum {
OMAP_NAND_IO_READ = 0, /* read */
OMAP_NAND_IO_WRITE, /* write */
} iomode;
u_char *buf;
int buf_len;
+ struct gpmc_nand_regs reg;
#ifdef CONFIG_MTD_NAND_OMAP_BCH
struct bch_control *bch;
@@ -141,6 +154,63 @@ struct omap_nand_info {
};
/**
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
+ unsigned int u32_count, int is_write, struct omap_nand_info *info)
+{
+ u32 val;
+
+ if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+ return -1;
+
+ if (readl(info->reg.gpmc_prefetch_control))
+ return -EBUSY;
+
+ /* Set the amount of bytes to be prefetched */
+ writel(u32_count, info->reg.gpmc_prefetch_config2);
+
+ /* Set dma/mpu mode, the prefetch read / post write and
+ * enable the engine. Set which cs is has requested for.
+ */
+ val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) |
+ PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH |
+ (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write));
+ writel(val, info->reg.gpmc_prefetch_config1);
+
+ /* Start the prefetch engine */
+ writel(0x1, info->reg.gpmc_prefetch_control);
+
+ return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static int omap_prefetch_reset(int cs, struct omap_nand_info *info)
+{
+ u32 config1;
+
+ /* check if the same module/cs is trying to reset */
+ config1 = readl(info->reg.gpmc_prefetch_config1);
+ if (((config1 >> PREFETCH_CONFIG1_CS_SHIFT) & CS_MASK) != cs)
+ return -EINVAL;
+
+ /* Stop the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_control);
+
+ /* Reset/disable the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_config1);
+
+ return 0;
+}
+
+/**
* omap_hwcontrol - hardware specific access to control-lines
* @mtd: MTD device structure
* @cmd: command to device
@@ -158,13 +228,13 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
if (cmd != NAND_CMD_NONE) {
if (ctrl & NAND_CLE)
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_COMMAND, cmd);
+ writeb(cmd, info->reg.gpmc_nand_command);
else if (ctrl & NAND_ALE)
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_ADDRESS, cmd);
+ writeb(cmd, info->reg.gpmc_nand_address);
else /* NAND_NCE */
- gpmc_nand_write(info->gpmc_cs, GPMC_NAND_DATA, cmd);
+ writeb(cmd, info->reg.gpmc_nand_data);
}
}
@@ -198,7 +268,8 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
iowrite8(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = gpmc_read_status(GPMC_STATUS_BUFFER);
+ status = readl(info->reg.gpmc_status) &
+ GPMC_STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -235,7 +306,8 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
iowrite16(*p++, info->nand.IO_ADDR_W);
/* wait until buffer is available for write */
do {
- status = gpmc_read_status(GPMC_STATUS_BUFFER);
+ status = readl(info->reg.gpmc_status) &
+ GPMC_STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -265,8 +337,8 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
@@ -275,14 +347,15 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
omap_read_buf8(mtd, (u_char *)p, len);
} else {
do {
- r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ r_count = readl(info->reg.gpmc_prefetch_status);
+ r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
p += r_count;
len -= r_count << 2;
} while (len);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
}
}
@@ -301,6 +374,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
int i = 0, ret = 0;
u16 *p = (u16 *)buf;
unsigned long tim, limit;
+ u32 val;
/* take care of subpage writes */
if (len % 2 != 0) {
@@ -310,8 +384,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
}
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info);
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
@@ -320,7 +394,8 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
omap_write_buf8(mtd, (u_char *)p, len);
} else {
while (len) {
- w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ w_count = readl(info->reg.gpmc_prefetch_status);
+ w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -329,11 +404,14 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
tim = 0;
limit = (loops_per_jiffy *
msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ do {
cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
}
}
@@ -365,6 +443,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
unsigned long tim, limit;
unsigned n;
int ret;
+ u32 val;
if (addr >= high_memory) {
struct page *p1;
@@ -396,9 +475,9 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
tx->callback_param = &info->comp;
dmaengine_submit(tx);
- /* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write);
+ /* configure and start prefetch transfer */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy_unmap;
@@ -410,11 +489,15 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
wait_for_completion(&info->comp);
tim = 0;
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+
+ do {
cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
return 0;
@@ -471,13 +554,12 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
{
struct omap_nand_info *info = (struct omap_nand_info *) dev;
u32 bytes;
- u32 irq_stat;
- irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS);
- bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+ bytes = readl(info->reg.gpmc_prefetch_status);
+ bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
- if (irq_stat & 0x2)
+ if (this_irq == info->gpmc_irq_count)
goto done;
if (info->buf_len && (info->buf_len < bytes))
@@ -494,20 +576,17 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
(u32 *)info->buf, bytes >> 2);
info->buf = info->buf + bytes;
- if (irq_stat & 0x2)
+ if (this_irq == info->gpmc_irq_count)
goto done;
}
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
return IRQ_HANDLED;
done:
complete(&info->comp);
- /* disable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0);
- /* clear status */
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+ disable_irq_nosync(info->gpmc_irq_fifo);
+ disable_irq_nosync(info->gpmc_irq_count);
return IRQ_HANDLED;
}
@@ -534,22 +613,22 @@ static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
init_completion(&info->comp);
/* configure and start prefetch transfer */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy;
info->buf_len = len;
- /* enable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
- (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
/* waiting for read to complete */
wait_for_completion(&info->comp);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
return;
out_copy:
@@ -572,6 +651,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
struct omap_nand_info, mtd);
int ret = 0;
unsigned long tim, limit;
+ u32 val;
if (len <= mtd->oobsize) {
omap_write_buf_pref(mtd, buf, len);
@@ -583,27 +663,31 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
init_completion(&info->comp);
/* configure and start prefetch transfer : size=24 */
- ret = gpmc_prefetch_enable(info->gpmc_cs,
- (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1);
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info);
if (ret)
/* PFPW engine is busy, use cpu copy method */
goto out_copy;
info->buf_len = len;
- /* enable irq */
- gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
- (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
/* waiting for write to complete */
wait_for_completion(&info->comp);
+
/* wait for data to flushed-out before reset the prefetch */
tim = 0;
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
- while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+ do {
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = GPMC_PREFETCH_STATUS_COUNT(val);
cpu_relax();
+ } while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset(info->gpmc_cs);
+ omap_prefetch_reset(info->gpmc_cs, info);
return;
out_copy:
@@ -843,7 +927,20 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code);
+ u32 val;
+
+ val = readl(info->reg.gpmc_ecc_config);
+ if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs)
+ return -EINVAL;
+
+ /* read ecc result */
+ val = readl(info->reg.gpmc_ecc1_result);
+ *ecc_code++ = val; /* P128e, ..., P1e */
+ *ecc_code++ = val >> 16; /* P128o, ..., P1o */
+ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+
+ return 0;
}
/**
@@ -857,8 +954,34 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
mtd);
struct nand_chip *chip = mtd->priv;
unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ u32 val;
+
+ /* clear ecc and enable bits */
+ val = ECCCLEAR | ECC1;
+ writel(val, info->reg.gpmc_ecc_control);
+
+ /* program ecc and result sizes */
+ val = ((((info->nand.ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) |
+ ECC1RESULTSIZE);
+ writel(val, info->reg.gpmc_ecc_size_config);
- gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
+ switch (mode) {
+ case NAND_ECC_READ:
+ case NAND_ECC_WRITE:
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
+ break;
+ case NAND_ECC_READSYN:
+ writel(ECCCLEAR, info->reg.gpmc_ecc_control);
+ break;
+ default:
+ dev_info(&info->pdev->dev,
+ "error: unrecognized Mode[%d]!\n", mode);
+ break;
+ }
+
+ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
+ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ writel(val, info->reg.gpmc_ecc_config);
}
/**
@@ -886,10 +1009,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
else
timeo += (HZ * 20) / 1000;
- gpmc_nand_write(info->gpmc_cs,
- GPMC_NAND_COMMAND, (NAND_CMD_STATUS & 0xFF));
+ writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command);
while (time_before(jiffies, timeo)) {
- status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+ status = readb(info->reg.gpmc_nand_data);
if (status & NAND_STATUS_READY)
break;
cond_resched();
@@ -909,22 +1031,13 @@ static int omap_dev_ready(struct mtd_info *mtd)
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
+ val = readl(info->reg.gpmc_status);
+
if ((val & 0x100) == 0x100) {
- /* Clear IRQ Interrupt */
- val |= 0x100;
- val &= ~(0x0);
- gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, val);
+ return 1;
} else {
- unsigned int cnt = 0;
- while (cnt++ < 0x1FF) {
- if ((val & 0x100) == 0x100)
- return 0;
- val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
- }
+ return 0;
}
-
- return 1;
}
#ifdef CONFIG_MTD_NAND_OMAP_BCH
@@ -1155,6 +1268,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
int i, offset;
dma_cap_mask_t mask;
unsigned sig;
+ struct resource *res;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -1174,7 +1288,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->pdev = pdev;
info->gpmc_cs = pdata->cs;
- info->phys_base = pdata->phys_base;
+ info->reg = pdata->reg;
info->mtd.priv = &info->nand;
info->mtd.name = dev_name(&pdev->dev);
@@ -1183,16 +1297,23 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
info->nand.options = pdata->devsize;
info->nand.options |= NAND_SKIP_BBTSCAN;
- /* NAND write protect off */
- gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "error getting memory resource\n");
+ goto out_free_info;
+ }
+
+ info->phys_base = res->start;
+ info->mem_size = resource_size(res);
- if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
+ if (!request_mem_region(info->phys_base, info->mem_size,
pdev->dev.driver->name)) {
err = -EBUSY;
goto out_free_info;
}
- info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
+ info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size);
if (!info->nand.IO_ADDR_R) {
err = -ENOMEM;
goto out_release_mem_region;
@@ -1265,17 +1386,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
break;
case NAND_OMAP_PREFETCH_IRQ:
- err = request_irq(pdata->gpmc_irq,
- omap_nand_irq, IRQF_SHARED, "gpmc-nand", info);
+ info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
+ if (info->gpmc_irq_fifo <= 0) {
+ dev_err(&pdev->dev, "error getting fifo irq\n");
+ err = -ENODEV;
+ goto out_release_mem_region;
+ }
+ err = request_irq(info->gpmc_irq_fifo, omap_nand_irq,
+ IRQF_SHARED, "gpmc-nand-fifo", info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
- pdata->gpmc_irq, err);
+ info->gpmc_irq_fifo, err);
+ info->gpmc_irq_fifo = 0;
+ goto out_release_mem_region;
+ }
+
+ info->gpmc_irq_count = platform_get_irq(pdev, 1);
+ if (info->gpmc_irq_count <= 0) {
+ dev_err(&pdev->dev, "error getting count irq\n");
+ err = -ENODEV;
+ goto out_release_mem_region;
+ }
+ err = request_irq(info->gpmc_irq_count, omap_nand_irq,
+ IRQF_SHARED, "gpmc-nand-count", info);
+ if (err) {
+ dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+ info->gpmc_irq_count, err);
+ info->gpmc_irq_count = 0;
goto out_release_mem_region;
- } else {
- info->gpmc_irq = pdata->gpmc_irq;
- info->nand.read_buf = omap_read_buf_irq_pref;
- info->nand.write_buf = omap_write_buf_irq_pref;
}
+
+ info->nand.read_buf = omap_read_buf_irq_pref;
+ info->nand.write_buf = omap_write_buf_irq_pref;
+
break;
default:
@@ -1363,7 +1506,11 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
out_release_mem_region:
if (info->dma)
dma_release_channel(info->dma);
- release_mem_region(info->phys_base, NAND_IO_SIZE);
+ if (info->gpmc_irq_count > 0)
+ free_irq(info->gpmc_irq_count, info);
+ if (info->gpmc_irq_fifo > 0)
+ free_irq(info->gpmc_irq_fifo, info);
+ release_mem_region(info->phys_base, info->mem_size);
out_free_info:
kfree(info);
@@ -1381,8 +1528,10 @@ static int omap_nand_remove(struct platform_device *pdev)
if (info->dma)
dma_release_channel(info->dma);
- if (info->gpmc_irq)
- free_irq(info->gpmc_irq, info);
+ if (info->gpmc_irq_count > 0)
+ free_irq(info->gpmc_irq_count, info);
+ if (info->gpmc_irq_fifo > 0)
+ free_irq(info->gpmc_irq_fifo, info);
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 398a82783848..1961be985171 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -39,22 +39,21 @@
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
-#include <plat/onenand.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
#include <plat/dma.h>
-
-#include <plat/board.h>
+#include <plat/cpu.h>
#define DRIVER_NAME "omap2-onenand"
-#define ONENAND_IO_SIZE SZ_128K
#define ONENAND_BUFRAM_SIZE (1024 * 5)
struct omap2_onenand {
struct platform_device *pdev;
int gpmc_cs;
unsigned long phys_base;
+ unsigned int mem_size;
int gpio_irq;
struct mtd_info mtd;
struct onenand_chip onenand;
@@ -626,6 +625,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
struct omap2_onenand *c;
struct onenand_chip *this;
int r;
+ struct resource *res;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
@@ -647,20 +647,24 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
c->gpio_irq = 0;
}
- r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
- if (r < 0) {
- dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ r = -EINVAL;
+ dev_err(&pdev->dev, "error getting memory resource\n");
goto err_kfree;
}
- if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
+ c->phys_base = res->start;
+ c->mem_size = resource_size(res);
+
+ if (request_mem_region(c->phys_base, c->mem_size,
pdev->dev.driver->name) == NULL) {
- dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
- "size: 0x%x\n", c->phys_base, ONENAND_IO_SIZE);
+ dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n",
+ c->phys_base, c->mem_size);
r = -EBUSY;
- goto err_free_cs;
+ goto err_kfree;
}
- c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
+ c->onenand.base = ioremap(c->phys_base, c->mem_size);
if (c->onenand.base == NULL) {
r = -ENOMEM;
goto err_release_mem_region;
@@ -776,9 +780,7 @@ err_release_gpio:
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
- release_mem_region(c->phys_base, ONENAND_IO_SIZE);
-err_free_cs:
- gpmc_cs_free(c->gpmc_cs);
+ release_mem_region(c->phys_base, c->mem_size);
err_kfree:
kfree(c);
@@ -800,7 +802,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
- release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+ release_mem_region(c->phys_base, c->mem_size);
gpmc_cs_free(c->gpmc_cs);
kfree(c);
diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c
index df808ac8cb65..6a40dd03a32f 100644
--- a/drivers/net/ethernet/seeq/ether3.c
+++ b/drivers/net/ethernet/seeq/ether3.c
@@ -99,13 +99,13 @@ typedef enum {
* The SEEQ8005 doesn't like us writing to its registers
* too quickly.
*/
-static inline void ether3_outb(int v, const void __iomem *r)
+static inline void ether3_outb(int v, void __iomem *r)
{
writeb(v, r);
udelay(1);
}
-static inline void ether3_outw(int v, const void __iomem *r)
+static inline void ether3_outw(int v, void __iomem *r)
{
writew(v, r);
udelay(1);
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 0ad06a3bd562..fa74efe82206 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -24,7 +24,7 @@
#include <asm/io.h>
#include <asm/sizes.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/tc.h>
diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
index cc0f00d73d15..b446c9641212 100644
--- a/drivers/pinctrl/pinctrl-coh901.c
+++ b/drivers/pinctrl/pinctrl-coh901.c
@@ -1,11 +1,8 @@
/*
* U300 GPIO module.
*
- * Copyright (C) 2007-2011 ST-Ericsson AB
+ * Copyright (C) 2007-2012 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
- * This can driver either of the two basic GPIO cores
- * available in the U300 platforms:
- * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
* COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
* Author: Linus Walleij <linus.walleij@linaro.org>
* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
@@ -24,19 +21,22 @@
#include <linux/slab.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinconf-generic.h>
-#include <mach/gpio-u300.h>
+#include <linux/platform_data/pinctrl-coh901.h>
#include "pinctrl-coh901.h"
+#define U300_GPIO_PORT_STRIDE (0x30)
/*
- * Register definitions for COH 901 335 variant
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2 (mask 0x000001FC) contains the core version ID.
*/
-#define U300_335_PORT_STRIDE (0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_335_PXPDIR (0x00)
-#define U300_335_PXPDOR (0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_335_PXPCR (0x04)
-/* This register layout is the same in both blocks */
+#define U300_GPIO_CR (0x00)
+#define U300_GPIO_CR_SYNC_SEL_ENABLE (0x00000002UL)
+#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
+#define U300_GPIO_PXPDIR (0x04)
+#define U300_GPIO_PXPDOR (0x08)
+#define U300_GPIO_PXPCR (0x0C)
#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK (0x0000FFFFUL)
#define U300_GPIO_PXPCR_PIN_MODE_MASK (0x00000003UL)
#define U300_GPIO_PXPCR_PIN_MODE_SHIFT (0x00000002UL)
@@ -44,53 +44,17 @@
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL (0x00000001UL)
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN (0x00000002UL)
#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE (0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_335_PXIEV (0x08)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_335_PXIEN (0x0C)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_335_PXIFR (0x10)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_335_PXICR (0x14)
-/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER (0x10)
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
+#define U300_GPIO_PXIEV (0x14)
+#define U300_GPIO_PXIEN (0x18)
+#define U300_GPIO_PXIFR (0x1C)
+#define U300_GPIO_PXICR (0x20)
#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK (0x000000FFUL)
#define U300_GPIO_PXICR_IRQ_CONFIG_MASK (0x00000001UL)
#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE (0x00000000UL)
#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE (0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_335_PXPER (0x18)
-/* This register layout is the same in both blocks */
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK (0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE (0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_335_CR (0x54)
-#define U300_335_CR_BLOCK_CLOCK_ENABLE (0x00000001UL)
-
-/*
- * Register definitions for COH 901 571 / 3 variant
- */
-#define U300_571_PORT_STRIDE (0x30)
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2 (mask 0x000001FC) contains the core version ID.
- */
-#define U300_571_CR (0x00)
-#define U300_571_CR_SYNC_SEL_ENABLE (0x00000002UL)
-#define U300_571_CR_BLOCK_CLKRQ_ENABLE (0x00000001UL)
-/*
- * These registers have the same layout and function as the corresponding
- * COH 901 335 registers, just at different offset.
- */
-#define U300_571_PXPDIR (0x04)
-#define U300_571_PXPDOR (0x08)
-#define U300_571_PXPCR (0x0C)
-#define U300_571_PXPER (0x10)
-#define U300_571_PXIEV (0x14)
-#define U300_571_PXIEN (0x18)
-#define U300_571_PXIFR (0x1C)
-#define U300_571_PXICR (0x20)
/* 8 bits per port, no version has more than 7 ports */
#define U300_GPIO_PINS_PER_PORT 8
@@ -149,8 +113,6 @@ struct u300_gpio_confdata {
/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
#define BS335_GPIO_NUM_PORTS 7
-/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
-#define BS365_GPIO_NUM_PORTS 5
#define U300_FLOATING_INPUT { \
.bias_mode = PIN_CONFIG_BIAS_HIGH_IMPEDANCE, \
@@ -172,7 +134,6 @@ struct u300_gpio_confdata {
.outval = 1, \
}
-
/* Initial configuration */
static const struct __initconst u300_gpio_confdata
bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
@@ -255,66 +216,6 @@ bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
}
};
-static const struct __initconst u300_gpio_confdata
-bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
- /* Port 0, pins 0-7 */
- {
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_PULL_UP_INPUT,
- U300_FLOATING_INPUT,
- },
- /* Port 1, pins 0-7 */
- {
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_OUTPUT_LOW,
- U300_FLOATING_INPUT,
- U300_FLOATING_INPUT,
- U300_OUTPUT_HIGH,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- },
- /* Port 2, pins 0-7 */
- {
- U300_FLOATING_INPUT,
- U300_PULL_UP_INPUT,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- },
- /* Port 3, pins 0-7 */
- {
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- },
- /* Port 4, pins 0-7 */
- {
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- U300_PULL_UP_INPUT,
- /* These 4 pins doesn't exist on DB3210 */
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- U300_OUTPUT_LOW,
- }
-};
-
/**
* to_u300_gpio() - get the pointer to u300_gpio
* @chip: the gpio chip member of the structure u300_gpio
@@ -716,13 +617,7 @@ static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
const struct u300_gpio_confdata *conf;
int offset = (i*8) + j;
- if (plat->variant == U300_GPIO_COH901571_3_BS335)
- conf = &bs335_gpio_config[i][j];
- else if (plat->variant == U300_GPIO_COH901571_3_BS365)
- conf = &bs365_gpio_config[i][j];
- else
- break;
-
+ conf = &bs335_gpio_config[i][j];
u300_gpio_init_pin(gpio, offset, conf);
}
}
@@ -796,50 +691,27 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
goto err_no_ioremap;
}
- if (plat->variant == U300_GPIO_COH901335) {
- dev_info(gpio->dev,
- "initializing GPIO Controller COH 901 335\n");
- gpio->stride = U300_335_PORT_STRIDE;
- gpio->pcr = U300_335_PXPCR;
- gpio->dor = U300_335_PXPDOR;
- gpio->dir = U300_335_PXPDIR;
- gpio->per = U300_335_PXPER;
- gpio->icr = U300_335_PXICR;
- gpio->ien = U300_335_PXIEN;
- gpio->iev = U300_335_PXIEV;
- ifr = U300_335_PXIFR;
-
- /* Turn on the GPIO block */
- writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
- gpio->base + U300_335_CR);
- } else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
- plat->variant == U300_GPIO_COH901571_3_BS365) {
- dev_info(gpio->dev,
- "initializing GPIO Controller COH 901 571/3\n");
- gpio->stride = U300_571_PORT_STRIDE;
- gpio->pcr = U300_571_PXPCR;
- gpio->dor = U300_571_PXPDOR;
- gpio->dir = U300_571_PXPDIR;
- gpio->per = U300_571_PXPER;
- gpio->icr = U300_571_PXICR;
- gpio->ien = U300_571_PXIEN;
- gpio->iev = U300_571_PXIEV;
- ifr = U300_571_PXIFR;
-
- val = readl(gpio->base + U300_571_CR);
- dev_info(gpio->dev, "COH901571/3 block version: %d, " \
- "number of cores: %d totalling %d pins\n",
- ((val & 0x000001FC) >> 2),
- ((val & 0x0000FE00) >> 9),
- ((val & 0x0000FE00) >> 9) * 8);
- writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
- gpio->base + U300_571_CR);
- u300_gpio_init_coh901571(gpio, plat);
- } else {
- dev_err(gpio->dev, "unknown block variant\n");
- err = -ENODEV;
- goto err_unknown_variant;
- }
+ dev_info(gpio->dev,
+ "initializing GPIO Controller COH 901 571/3\n");
+ gpio->stride = U300_GPIO_PORT_STRIDE;
+ gpio->pcr = U300_GPIO_PXPCR;
+ gpio->dor = U300_GPIO_PXPDOR;
+ gpio->dir = U300_GPIO_PXPDIR;
+ gpio->per = U300_GPIO_PXPER;
+ gpio->icr = U300_GPIO_PXICR;
+ gpio->ien = U300_GPIO_PXIEN;
+ gpio->iev = U300_GPIO_PXIEV;
+ ifr = U300_GPIO_PXIFR;
+
+ val = readl(gpio->base + U300_GPIO_CR);
+ dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+ "number of cores: %d totalling %d pins\n",
+ ((val & 0x000001FC) >> 2),
+ ((val & 0x0000FE00) >> 9),
+ ((val & 0x0000FE00) >> 9) * 8);
+ writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE,
+ gpio->base + U300_GPIO_CR);
+ u300_gpio_init_coh901571(gpio, plat);
/* Add each port with its IRQ separately */
INIT_LIST_HEAD(&gpio->port_list);
@@ -906,7 +778,6 @@ err_no_pinctrl:
err_no_chip:
err_no_port:
u300_gpio_free_ports(gpio);
-err_unknown_variant:
iounmap(gpio->base);
err_no_ioremap:
release_mem_region(gpio->memres->start, resource_size(gpio->memres));
@@ -923,16 +794,11 @@ err_no_clk:
static int __exit u300_gpio_remove(struct platform_device *pdev)
{
- struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
struct u300_gpio *gpio = platform_get_drvdata(pdev);
int err;
/* Turn off the GPIO block */
- if (plat->variant == U300_GPIO_COH901335)
- writel(0x00000000U, gpio->base + U300_335_CR);
- if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
- plat->variant == U300_GPIO_COH901571_3_BS365)
- writel(0x00000000U, gpio->base + U300_571_CR);
+ writel(0x00000000U, gpio->base + U300_GPIO_CR);
err = gpiochip_remove(&gpio->chip);
if (err < 0) {
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 44efc6e202af..d4957b4edb62 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -27,6 +27,8 @@
#include <linux/pm_runtime.h>
#include <linux/power/smartreflex.h>
+#include <plat/cpu.h>
+
#define SMARTREFLEX_NAME_LEN 16
#define NVALUE_NAME_LEN 40
#define SR_DISABLE_TIMEOUT 200
diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index a1f7ac1f8cf6..b54504ee61f1 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -29,7 +29,7 @@
#include <linux/remoteproc.h>
#include <plat/mailbox.h>
-#include <plat/remoteproc.h>
+#include <linux/platform_data/remoteproc-omap.h>
#include "omap_remoteproc.h"
#include "remoteproc_internal.h"
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index edfd12b48c28..968d08358d20 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -273,7 +273,7 @@ static void eesoxscsi_buffer_out(void *buf, int length, void __iomem *base)
{
const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET;
const void __iomem *reg_dmastat = base + EESOX_DMASTAT;
- const void __iomem *reg_dmadata = base + EESOX_DMADATA;
+ void __iomem *reg_dmadata = base + EESOX_DMADATA;
do {
unsigned int status;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5f84b5563c2d..2d198a01a410 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -366,7 +366,7 @@ config SPI_STMP3XXX
config SPI_TEGRA
tristate "Nvidia Tegra SPI controller"
- depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
+ depends on ARCH_TEGRA && TEGRA20_APB_DMA
help
SPI driver for NVidia Tegra SoCs
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 9b0d71696039..0a94d9dc9c31 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -52,8 +52,9 @@
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
-#include <plat/omap7xx.h> /* OMAP7XX_IO_CONF registers */
+#include <mach/mux.h>
+
+#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
/* FIXME address is now a platform device resource,
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 569714ebffe0..5d59a69a9064 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -42,7 +42,7 @@
#include <linux/spi/spi.h>
#include <plat/clock.h>
-#include <plat/mcspi.h>
+#include <linux/platform_data/spi-omap2-mcspi.h>
#define OMAP2_MCSPI_MAX_FREQ 48000000
#define SPI_AUTOSUSPEND_TIMEOUT 2000
diff --git a/drivers/spi/spi-tegra.c b/drivers/spi/spi-tegra.c
index ef52c1c6f5c5..488d9b6e9cbe 100644
--- a/drivers/spi/spi-tegra.c
+++ b/drivers/spi/spi-tegra.c
@@ -164,23 +164,15 @@ struct spi_tegra_data {
* for the generic case.
*/
int dma_req_len;
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- struct tegra_dma_req rx_dma_req;
- struct tegra_dma_channel *rx_dma;
-#else
struct dma_chan *rx_dma;
struct dma_slave_config sconfig;
struct dma_async_tx_descriptor *rx_dma_desc;
dma_cookie_t rx_cookie;
-#endif
u32 *rx_bb;
dma_addr_t rx_bb_phys;
};
-#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
static void tegra_spi_rx_dma_complete(void *args);
-#endif
-
static inline unsigned long spi_tegra_readl(struct spi_tegra_data *tspi,
unsigned long reg)
{
@@ -204,10 +196,6 @@ static void spi_tegra_go(struct spi_tegra_data *tspi)
val &= ~SLINK_DMA_BLOCK_SIZE(~0) & ~SLINK_DMA_EN;
val |= SLINK_DMA_BLOCK_SIZE(tspi->dma_req_len / 4 - 1);
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma_req.size = tspi->dma_req_len;
- tegra_dma_enqueue_req(tspi->rx_dma, &tspi->rx_dma_req);
-#else
tspi->rx_dma_desc = dmaengine_prep_slave_single(tspi->rx_dma,
tspi->rx_bb_phys, tspi->dma_req_len,
DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
@@ -219,7 +207,6 @@ static void spi_tegra_go(struct spi_tegra_data *tspi)
tspi->rx_dma_desc->callback_param = tspi;
tspi->rx_cookie = dmaengine_submit(tspi->rx_dma_desc);
dma_async_issue_pending(tspi->rx_dma);
-#endif
val |= SLINK_DMA_EN;
spi_tegra_writel(tspi, val, SLINK_DMA_CTL);
@@ -405,19 +392,12 @@ static void handle_spi_rx_dma_complete(struct spi_tegra_data *tspi)
spin_unlock_irqrestore(&tspi->lock, flags);
}
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-static void tegra_spi_rx_dma_complete(struct tegra_dma_req *req)
-{
- struct spi_tegra_data *tspi = req->dev;
- handle_spi_rx_dma_complete(tspi);
-}
-#else
+
static void tegra_spi_rx_dma_complete(void *args)
{
struct spi_tegra_data *tspi = args;
handle_spi_rx_dma_complete(tspi);
}
-#endif
static int spi_tegra_setup(struct spi_device *spi)
{
@@ -509,9 +489,7 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
struct spi_tegra_data *tspi;
struct resource *r;
int ret;
-#if !defined(CONFIG_TEGRA_SYSTEM_DMA)
dma_cap_mask_t mask;
-#endif
master = spi_alloc_master(&pdev->dev, sizeof *tspi);
if (master == NULL) {
@@ -563,14 +541,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&tspi->queue);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT);
- if (!tspi->rx_dma) {
- dev_err(&pdev->dev, "can not allocate rx dma channel\n");
- ret = -ENODEV;
- goto err3;
- }
-#else
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
tspi->rx_dma = dma_request_channel(mask, NULL, NULL);
@@ -580,8 +550,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
goto err3;
}
-#endif
-
tspi->rx_bb = dma_alloc_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
&tspi->rx_bb_phys, GFP_KERNEL);
if (!tspi->rx_bb) {
@@ -590,17 +558,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
goto err4;
}
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tspi->rx_dma_req.complete = tegra_spi_rx_dma_complete;
- tspi->rx_dma_req.to_memory = 1;
- tspi->rx_dma_req.dest_addr = tspi->rx_bb_phys;
- tspi->rx_dma_req.dest_bus_width = 32;
- tspi->rx_dma_req.source_addr = tspi->phys + SLINK_RX_FIFO;
- tspi->rx_dma_req.source_bus_width = 32;
- tspi->rx_dma_req.source_wrap = 4;
- tspi->rx_dma_req.req_sel = spi_tegra_req_sels[pdev->id];
- tspi->rx_dma_req.dev = tspi;
-#else
/* Dmaengine Dma slave config */
tspi->sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
tspi->sconfig.dst_addr = tspi->phys + SLINK_RX_FIFO;
@@ -616,7 +573,6 @@ static int __devinit spi_tegra_probe(struct platform_device *pdev)
ret);
goto err4;
}
-#endif
master->dev.of_node = pdev->dev.of_node;
ret = spi_register_master(master);
@@ -630,11 +586,7 @@ err5:
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
err4:
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tegra_dma_free_channel(tspi->rx_dma);
-#else
dma_release_channel(tspi->rx_dma);
-#endif
err3:
clk_put(tspi->clk);
err2:
@@ -656,12 +608,7 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev)
tspi = spi_master_get_devdata(master);
spi_unregister_master(master);
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
- tegra_dma_free_channel(tspi->rx_dma);
-#else
dma_release_channel(tspi->rx_dma);
-#endif
-
dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN,
tspi->rx_bb, tspi->rx_bb_phys);
diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c
index 7eac01e5fe0b..b647207928b1 100644
--- a/drivers/staging/tidspbridge/core/dsp-clock.c
+++ b/drivers/staging/tidspbridge/core/dsp-clock.c
@@ -23,7 +23,7 @@
/* ----------------------------------- Host OS */
#include <dspbridge/host_os.h>
#include <plat/dmtimer.h>
-#include <plat/mcbsp.h>
+#include <linux/platform_data/asoc-ti-mcbsp.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index 012c5a0cc6c8..066a3ceec65e 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -16,7 +16,7 @@
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <linux/types.h>
/* ----------------------------------- Host OS */
diff --git a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
index 58a1d6dcf098..dafa6d9b2948 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
@@ -19,7 +19,7 @@
/* ----------------------------------- Host OS */
#include <dspbridge/host_os.h>
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c
index 7fda10c36862..f53ed98d18c1 100644
--- a/drivers/staging/tidspbridge/core/tiomap_io.c
+++ b/drivers/staging/tidspbridge/core/tiomap_io.c
@@ -16,7 +16,7 @@
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
/* ----------------------------------- DSP/BIOS Bridge */
#include <dspbridge/dbdefs.h>
diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c
index e5adad08f1c4..1dce36fb828f 100644
--- a/drivers/staging/tidspbridge/core/wdt.c
+++ b/drivers/staging/tidspbridge/core/wdt.c
@@ -26,7 +26,7 @@
#define OMAP34XX_WDT3_BASE (0x49000000 + 0x30000)
-#define INT_34XX_WDT3_IRQ 36
+#define INT_34XX_WDT3_IRQ (36 + NR_IRQS)
static struct dsp_wdt_setting dsp_wdt;
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
index 6acea2b56aa4..bddea1d3b2c3 100644
--- a/drivers/staging/tidspbridge/rmgr/drv_interface.c
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -16,7 +16,7 @@
* WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
-#include <plat/dsp.h>
+#include <linux/platform_data/dsp-omap.h>
#include <linux/types.h>
#include <linux/platform_device.h>
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index 7c13639c597e..9bd004f9da89 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -548,8 +548,8 @@ static struct uart_ops ks8695uart_pops = {
static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
{
- .membase = (void *) KS8695_UART_VA,
- .mapbase = KS8695_UART_VA,
+ .membase = KS8695_UART_VA,
+ .mapbase = KS8695_UART_PA,
.iotype = SERIAL_IO_MEM,
.irq = KS8695_IRQ_UART_TX,
.uartclk = KS8695_CLOCK_RATE * 16,
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 2564b546ba8a..4c90b510d016 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -13,7 +13,6 @@ config USB_ARCH_HAS_OHCI
default y if PXA3xx
default y if ARCH_EP93XX
default y if ARCH_AT91
- default y if ARCH_PNX4008
default y if MFD_TC6393XB
default y if ARCH_W90X900
default y if ARCH_DAVINCI_DA8XX
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b1deb0fd4197..3f1431d37e1c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -292,7 +292,7 @@ config USB_OHCI_HCD
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
select USB_OTG_UTILS if ARCH_OMAP
- depends on USB_ISP1301 || !(ARCH_LPC32XX || ARCH_PNX4008)
+ depends on USB_ISP1301 || !ARCH_LPC32XX
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 2b1e8d84c873..6780010e9c3c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1049,7 +1049,7 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_at91_driver
#endif
-#if defined(CONFIG_ARCH_PNX4008) || defined(CONFIG_ARCH_LPC32XX)
+#ifdef CONFIG_ARCH_LPC32XX
#include "ohci-nxp.c"
#define PLATFORM_DRIVER usb_hcd_nxp_driver
#endif
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index c60066a63606..e068f034cb9b 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -2,7 +2,6 @@
* driver for NXP USB Host devices
*
* Currently supported OHCI host devices:
- * - Philips PNX4008
* - NXP LPC32xx
*
* Authors: Dmitry Chigirev <source@mvista.com>
@@ -66,38 +65,6 @@ static struct clk *usb_pll_clk;
static struct clk *usb_dev_clk;
static struct clk *usb_otg_clk;
-static void isp1301_configure_pnx4008(void)
-{
- /* PNX4008 only supports DAT_SE0 USB mode */
- /* PNX4008 R2A requires setting the MAX603 to output 3.6V */
- /* Power up externel charge-pump */
-
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(MC1_DAT_SE0 | MC1_SPEED_REG));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_2,
- MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
- ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
- 0xFF);
- i2c_smbus_write_byte_data(isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR,
- 0xFF);
-}
-
static void isp1301_configure_lpc32xx(void)
{
/* LPC32XX only supports DAT_SE0 USB mode */
@@ -149,10 +116,7 @@ static void isp1301_configure_lpc32xx(void)
static void isp1301_configure(void)
{
- if (machine_is_pnx4008())
- isp1301_configure_pnx4008();
- else
- isp1301_configure_lpc32xx();
+ isp1301_configure_lpc32xx();
}
static inline void isp1301_vbus_on(void)
@@ -241,47 +205,6 @@ static const struct hc_driver ohci_nxp_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
-static void nxp_set_usb_bits(void)
-{
- if (machine_is_pnx4008()) {
- start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
- start_int_ack(SE_USB_OTG_ATX_INT_N);
- start_int_umask(SE_USB_OTG_ATX_INT_N);
-
- start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
- start_int_ack(SE_USB_OTG_TIMER_INT);
- start_int_umask(SE_USB_OTG_TIMER_INT);
-
- start_int_set_rising_edge(SE_USB_I2C_INT);
- start_int_ack(SE_USB_I2C_INT);
- start_int_umask(SE_USB_I2C_INT);
-
- start_int_set_rising_edge(SE_USB_INT);
- start_int_ack(SE_USB_INT);
- start_int_umask(SE_USB_INT);
-
- start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
- start_int_ack(SE_USB_NEED_CLK_INT);
- start_int_umask(SE_USB_NEED_CLK_INT);
-
- start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
- start_int_ack(SE_USB_AHB_NEED_CLK_INT);
- start_int_umask(SE_USB_AHB_NEED_CLK_INT);
- }
-}
-
-static void nxp_unset_usb_bits(void)
-{
- if (machine_is_pnx4008()) {
- start_int_mask(SE_USB_OTG_ATX_INT_N);
- start_int_mask(SE_USB_OTG_TIMER_INT);
- start_int_mask(SE_USB_I2C_INT);
- start_int_mask(SE_USB_INT);
- start_int_mask(SE_USB_NEED_CLK_INT);
- start_int_mask(SE_USB_AHB_NEED_CLK_INT);
- }
-}
-
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd = 0;
@@ -376,9 +299,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
goto out8;
}
- /* Set all USB bits in the Start Enable register */
- nxp_set_usb_bits();
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get MEM resource\n");
@@ -413,7 +333,6 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
nxp_stop_hc();
out8:
- nxp_unset_usb_bits();
usb_put_hcd(hcd);
out7:
clk_disable(usb_otg_clk);
@@ -441,7 +360,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev)
nxp_stop_hc();
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- nxp_unset_usb_bits();
clk_disable(usb_pll_clk);
clk_put(usb_pll_clk);
clk_disable(usb_dev_clk);
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f8b2d91851f7..4531d03503c3 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -24,7 +24,7 @@
#include <asm/io.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 53e25968ed0c..7a62b95dac24 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -17,7 +17,6 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <plat/dma.h>
-#include <plat/mux.h>
#include "musb_core.h"
#include "tusb6010.h"
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 7a88667742b6..81f1f9a0be8f 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -36,7 +36,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include <mach/usb.h>
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index bfdc5fbeaa11..9a046a4c98f5 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -27,10 +27,10 @@
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/slab.h>
+#include <linux/platform_data/omap1_bl.h>
#include <mach/hardware.h>
-#include <plat/board.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#define OMAPBL_MAX_INTENSITY 0xff
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 7ae9d53f2bf1..113d43a16f54 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -131,7 +131,7 @@
#define UPPER_MARGIN 32
#define LOWER_MARGIN 32
-static resource_size_t da8xx_fb_reg_base;
+static void __iomem *da8xx_fb_reg_base;
static struct resource *lcdc_regs;
static unsigned int lcd_revision;
static irq_handler_t lcdc_irq_handler;
@@ -951,7 +951,7 @@ static int __devexit fb_remove(struct platform_device *dev)
clk_disable(par->lcdc_clk);
clk_put(par->lcdc_clk);
framebuffer_release(info);
- iounmap((void __iomem *)da8xx_fb_reg_base);
+ iounmap(da8xx_fb_reg_base);
release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
}
@@ -1171,7 +1171,7 @@ static int __devinit fb_probe(struct platform_device *device)
if (!lcdc_regs)
return -EBUSY;
- da8xx_fb_reg_base = (resource_size_t)ioremap(lcdc_regs->start, len);
+ da8xx_fb_reg_base = ioremap(lcdc_regs->start, len);
if (!da8xx_fb_reg_base) {
ret = -EBUSY;
goto err_request_mem;
@@ -1392,7 +1392,7 @@ err_clk_put:
clk_put(fb_clk);
err_ioremap:
- iounmap((void __iomem *)da8xx_fb_reg_base);
+ iounmap(da8xx_fb_reg_base);
err_request_mem:
release_mem_region(lcdc_regs->start, len);
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index d3a311327227..ed4cad87fbcd 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -27,8 +27,7 @@
#include <linux/lcd.h>
#include <linux/gpio.h>
-#include <plat/board-ams-delta.h>
-#include <mach/hardware.h>
+#include <mach/board-ams-delta.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index e3880c4a0bb1..b739600c51ac 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -25,7 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/module.h>
-#include <plat/lcd_mipid.h>
+#include <linux/platform_data/lcd-mipid.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index 5914220dfa9c..3aa62da89195 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -24,7 +24,7 @@
#include <linux/platform_device.h>
#include <asm/gpio.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
#include "omapfb.h"
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 5b289c5f695b..ee9e29639dcc 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,6 +37,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <plat/cpu.h>
#include <plat/clock.h>
#include <video/omapdss.h>
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index fc671d3d8004..3c39aa8de928 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -31,6 +31,7 @@
#include <linux/omapfb.h>
#include <video/omapdss.h>
+#include <plat/cpu.h>
#include <plat/vram.h>
#include <plat/vrfb.h>
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 53d75719078e..ad1bb9382a96 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -237,12 +237,12 @@ config OMAP_WATCHDOG
here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
config PNX4008_WATCHDOG
- tristate "PNX4008 and LPC32XX Watchdog"
- depends on ARCH_PNX4008 || ARCH_LPC32XX
+ tristate "LPC32XX Watchdog"
+ depends on ARCH_LPC32XX
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
- in the PNX4008 or LPC32XX processor.
+ in the LPC32XX processor.
This driver can be built as a module by choosing M. The module
will be called pnx4008_wdt.
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 59e75d9a6b7f..c1a4d3bf581d 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -24,7 +24,19 @@
#include <linux/io.h>
#include <linux/uaccess.h>
#include <mach/hardware.h>
-#include <mach/regs-timer.h>
+
+#define KS8695_TMR_OFFSET (0xF0000 + 0xE400)
+#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET)
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON (0x00) /* Timer Control Register */
+#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */
+#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_MAX_TIME 171 /* seconds */
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index fceec4f4eb7e..f5db18dbc0f9 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -46,6 +46,7 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
+#include <plat/cpu.h>
#include <plat/prcm.h>
#include "omap_wdt.h"
@@ -218,12 +219,16 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd,
case WDIOC_GETSTATUS:
return put_user(0, (int __user *)arg);
case WDIOC_GETBOOTSTATUS:
+#ifdef CONFIG_ARCH_OMAP1
if (cpu_is_omap16xx())
return put_user(__raw_readw(ARM_SYSST),
(int __user *)arg);
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
if (cpu_is_omap24xx())
return put_user(omap_prcm_get_reset_sources(),
(int __user *)arg);
+#endif
return put_user(0, (int __user *)arg);
case WDIOC_KEEPALIVE:
spin_lock(&wdt_lock);