Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...

1 files changed, 253 insertions, 2 deletions

diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 8a21832c6693..57820c199bc2 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -484,8 +484,6 @@
 #define QLA82XX_ADDR_OCM1		(0x0000000200400000ULL)
 #define QLA82XX_ADDR_OCM1_MAX		(0x00000002004fffffULL)
 #define QLA82XX_ADDR_QDR_NET		(0x0000000300000000ULL)
-
-#define QLA82XX_P2_ADDR_QDR_NET_MAX	(0x00000003001fffffULL)
 #define QLA82XX_P3_ADDR_QDR_NET_MAX	(0x0000000303ffffffULL)
 
 #define QLA82XX_PCI_CRBSPACE		(unsigned long)0x06000000
@@ -890,6 +888,7 @@ struct ct6_dsd {
 };
 
 #define MBC_TOGGLE_INTERRUPT	0x10
+#define MBC_SET_LED_CONFIG	0x125
 
 /* Flash  offset */
 #define FLT_REG_BOOTLOAD_82XX	0x72
@@ -922,4 +921,256 @@ struct ct6_dsd {
 #define M25P_INSTR_DP		0xb9
 #define M25P_INSTR_RES		0xab
 
+/* Minidump related */
+
+/*
+ * Version of the template
+ * 4 Bytes
+ * X.Major.Minor.RELEASE
+ */
+#define QLA82XX_MINIDUMP_VERSION         0x10101
+
+/*
+ * Entry Type Defines
+ */
+#define QLA82XX_RDNOP                   0
+#define QLA82XX_RDCRB                   1
+#define QLA82XX_RDMUX                   2
+#define QLA82XX_QUEUE                   3
+#define QLA82XX_BOARD                   4
+#define QLA82XX_RDSRE                   5
+#define QLA82XX_RDOCM                   6
+#define QLA82XX_CACHE                  10
+#define QLA82XX_L1DAT                  11
+#define QLA82XX_L1INS                  12
+#define QLA82XX_L2DTG                  21
+#define QLA82XX_L2ITG                  22
+#define QLA82XX_L2DAT                  23
+#define QLA82XX_L2INS                  24
+#define QLA82XX_RDROM                  71
+#define QLA82XX_RDMEM                  72
+#define QLA82XX_CNTRL                  98
+#define QLA82XX_TLHDR                  99
+#define QLA82XX_RDEND                  255
+
+/*
+ * Opcodes for Control Entries.
+ * These Flags are bit fields.
+ */
+#define QLA82XX_DBG_OPCODE_WR        0x01
+#define QLA82XX_DBG_OPCODE_RW        0x02
+#define QLA82XX_DBG_OPCODE_AND       0x04
+#define QLA82XX_DBG_OPCODE_OR        0x08
+#define QLA82XX_DBG_OPCODE_POLL      0x10
+#define QLA82XX_DBG_OPCODE_RDSTATE   0x20
+#define QLA82XX_DBG_OPCODE_WRSTATE   0x40
+#define QLA82XX_DBG_OPCODE_MDSTATE   0x80
+
+/*
+ * Template Header and Entry Header definitions start here.
+ */
+
+/*
+ * Template Header
+ * Parts of the template header can be modified by the driver.
+ * These include the saved_state_array, capture_debug_level, driver_timestamp
+ */
+
+#define QLA82XX_DBG_STATE_ARRAY_LEN        16
+#define QLA82XX_DBG_CAP_SIZE_ARRAY_LEN     8
+#define QLA82XX_DBG_RSVD_ARRAY_LEN         8
+
+/*
+ * Driver Flags
+ */
+#define QLA82XX_DBG_SKIPPED_FLAG	0x80	/* driver skipped this entry */
+#define	QLA82XX_DEFAULT_CAP_MASK	0xFF	/* default capture mask */
+
+struct qla82xx_md_template_hdr {
+	uint32_t entry_type;
+	uint32_t first_entry_offset;
+	uint32_t size_of_template;
+	uint32_t capture_debug_level;
+
+	uint32_t num_of_entries;
+	uint32_t version;
+	uint32_t driver_timestamp;
+	uint32_t template_checksum;
+
+	uint32_t driver_capture_mask;
+	uint32_t driver_info[3];
+
+	uint32_t saved_state_array[QLA82XX_DBG_STATE_ARRAY_LEN];
+	uint32_t capture_size_array[QLA82XX_DBG_CAP_SIZE_ARRAY_LEN];
+
+	/*  markers_array used to capture some special locations on board */
+	uint32_t markers_array[QLA82XX_DBG_RSVD_ARRAY_LEN];
+	uint32_t num_of_free_entries;	/* For internal use */
+	uint32_t free_entry_offset;	/* For internal use */
+	uint32_t total_table_size;	/*  For internal use */
+	uint32_t bkup_table_offset;	/*  For internal use */
+} __packed;
+
+/*
+ * Entry Header:  Common to All Entry Types
+ */
+
+/*
+ * Driver Code is for driver to write some info about the entry.
+ * Currently not used.
+ */
+typedef struct qla82xx_md_entry_hdr {
+	uint32_t entry_type;
+	uint32_t entry_size;
+	uint32_t entry_capture_size;
+	struct {
+		uint8_t entry_capture_mask;
+		uint8_t entry_code;
+		uint8_t driver_code;
+		uint8_t driver_flags;
+	} d_ctrl;
+} __packed qla82xx_md_entry_hdr_t;
+
+/*
+ *  Read CRB entry header
+ */
+struct qla82xx_md_entry_crb {
+	qla82xx_md_entry_hdr_t h;
+	uint32_t addr;
+	struct {
+		uint8_t addr_stride;
+		uint8_t state_index_a;
+		uint16_t poll_timeout;
+	} crb_strd;
+
+	uint32_t data_size;
+	uint32_t op_count;
+
+	struct {
+		uint8_t opcode;
+		uint8_t state_index_v;
+		uint8_t shl;
+		uint8_t shr;
+	} crb_ctrl;
+
+	uint32_t value_1;
+	uint32_t value_2;
+	uint32_t value_3;
+} __packed;
+
+/*
+ * Cache entry header
+ */
+struct qla82xx_md_entry_cache {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t tag_reg_addr;
+	struct {
+		uint16_t tag_value_stride;
+		uint16_t init_tag_value;
+	} addr_ctrl;
+
+	uint32_t data_size;
+	uint32_t op_count;
+
+	uint32_t control_addr;
+	struct {
+		uint16_t write_value;
+		uint8_t poll_mask;
+		uint8_t poll_wait;
+	} cache_ctrl;
+
+	uint32_t read_addr;
+	struct {
+		uint8_t read_addr_stride;
+		uint8_t read_addr_cnt;
+		uint16_t rsvd_1;
+	} read_ctrl;
+} __packed;
+
+/*
+ * Read OCM
+ */
+struct qla82xx_md_entry_rdocm {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t rsvd_0;
+	uint32_t rsvd_1;
+	uint32_t data_size;
+	uint32_t op_count;
+
+	uint32_t rsvd_2;
+	uint32_t rsvd_3;
+	uint32_t read_addr;
+	uint32_t read_addr_stride;
+	uint32_t read_addr_cntrl;
+} __packed;
+
+/*
+ * Read Memory
+ */
+struct qla82xx_md_entry_rdmem {
+	qla82xx_md_entry_hdr_t h;
+	uint32_t rsvd[6];
+	uint32_t read_addr;
+	uint32_t read_data_size;
+} __packed;
+
+/*
+ * Read ROM
+ */
+struct qla82xx_md_entry_rdrom {
+	qla82xx_md_entry_hdr_t h;
+	uint32_t rsvd[6];
+	uint32_t read_addr;
+	uint32_t read_data_size;
+} __packed;
+
+struct qla82xx_md_entry_mux {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t select_addr;
+	uint32_t rsvd_0;
+	uint32_t data_size;
+	uint32_t op_count;
+
+	uint32_t select_value;
+	uint32_t select_value_stride;
+	uint32_t read_addr;
+	uint32_t rsvd_1;
+} __packed;
+
+struct qla82xx_md_entry_queue {
+	qla82xx_md_entry_hdr_t h;
+
+	uint32_t select_addr;
+	struct {
+		uint16_t queue_id_stride;
+		uint16_t rsvd_0;
+	} q_strd;
+
+	uint32_t data_size;
+	uint32_t op_count;
+	uint32_t rsvd_1;
+	uint32_t rsvd_2;
+
+	uint32_t read_addr;
+	struct {
+		uint8_t read_addr_stride;
+		uint8_t read_addr_cnt;
+		uint16_t rsvd_3;
+	} rd_strd;
+} __packed;
+
+#define MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE 0x129
+#define RQST_TMPLT_SIZE	0x0
+#define RQST_TMPLT 0x1
+#define MD_DIRECT_ROM_WINDOW	0x42110030
+#define MD_DIRECT_ROM_READ_BASE	0x42150000
+#define MD_MIU_TEST_AGT_CTRL		0x41000090
+#define MD_MIU_TEST_AGT_ADDR_LO		0x41000094
+#define MD_MIU_TEST_AGT_ADDR_HI		0x41000098
+
+static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
+	0x410000B8, 0x410000BC };
 #endif