mfd/regulator: remove bq2419x driver

The bq2419x driver functionality is merged into single file as
power/bq2419x-charger, these files are not required hence deleting.

Bug 1240114

Change-Id: Ibc09b12904558d6b0905f6bdf309e452f9c8be78
Signed-off-by: Syed Rafiuddin <srafiuddin@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-on: http://git-master/r/205497
(cherry picked from commit df6821a3a1013d4775fe7ed0c52a56a8bef29a1f)
Reviewed-on: http://git-master/r/216078
Reviewed-by: Hyong Bin Kim <hyongbink@nvidia.com>
Tested-by: Hyong Bin Kim <hyongbink@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit

3 files changed, 0 insertions, 306 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 84848300bf86..03aa8ab1a454 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -88,12 +88,6 @@ config REGULATOR_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  regulator driver.
 
-config REGULATOR_BQ2419X
-	tristate "BQ24190, BQ24191, BQ24192 Charger VBUS regualtor"
-	depends on MFD_BQ2419X
-	help
-	  Say y here to support the VBUS regulator support from BQ2419X.
-
 config REGULATOR_DA903X
 	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
 	depends on PMIC_DA903X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2bfff3150596..79ac38c4c7b1 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
-obj-$(CONFIG_REGULATOR_BQ2419X) += bq2419x-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
diff --git a/drivers/regulator/bq2419x-regulator.c b/drivers/regulator/bq2419x-regulator.c
deleted file mode 100644
index e4f660212cc4..000000000000
--- a/drivers/regulator/bq2419x-regulator.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * bq2419x-regulator.c --  bq2419x
- *
- * Regulator driver for BQ2419X charger.
- *
- * Copyright (c) 2012-2013, NVIDIA CORPORATION.  All rights reserved.
- *
- * Author: Laxman Dewangan <ldewangan@nvidia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
- * whether express or implied; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- * 02111-1307, USA
- */
-
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/bq2419x.h>
-#include <linux/slab.h>
-
-struct bq2419x_regulator_info {
-	struct device *dev;
-	struct regulator_desc desc;
-	struct regulator_dev *rdev;
-	struct bq2419x_chip *chip;
-	int gpio_otg_iusb;
-	bool power_off_on_suspend;
-	struct mutex mutex;
-	int shutdown_complete;
-};
-
-static int bq2419x_regulator_enable_time(struct regulator_dev *rdev)
-{
-	return 500000;
-}
-
-static int bq2419x_dcdc_enable(struct regulator_dev *rdev)
-{
-	struct bq2419x_regulator_info *bq = rdev_get_drvdata(rdev);
-	int ret;
-
-	dev_info(bq->dev, "%s called\n", __func__);
-	if (gpio_is_valid(bq->gpio_otg_iusb))
-		gpio_set_value(bq->gpio_otg_iusb, 1);
-
-	mutex_lock(&bq->mutex);
-	if (bq && bq->shutdown_complete) {
-		mutex_unlock(&bq->mutex);
-		return -ENODEV;
-	}
-
-	/* Clear EN_HIZ */
-	ret = regmap_update_bits(bq->chip->regmap,
-			BQ2419X_INPUT_SRC_REG, BQ2419X_EN_HIZ, 0);
-	if (ret < 0) {
-		dev_err(bq->dev, "error reading reg: 0x%x\n",
-			BQ2419X_INPUT_SRC_REG);
-		return ret;
-	}
-
-	ret = regmap_update_bits(bq->chip->regmap, BQ2419X_OTG,
-			BQ2419X_OTG_ENABLE_MASK, BQ2419X_OTG_ENABLE);
-	if (ret < 0) {
-		dev_err(bq->dev, "register %d update failed with err %d",
-			 BQ2419X_OTG, ret);
-		mutex_unlock(&bq->mutex);
-		return ret;
-	}
-	mutex_unlock(&bq->mutex);
-	return ret;
-}
-
-static int bq2419x_dcdc_disable(struct regulator_dev *rdev)
-{
-	struct bq2419x_regulator_info *bq = rdev_get_drvdata(rdev);
-	int ret = 0;
-
-	dev_info(bq->dev, "%s called\n", __func__);
-	mutex_lock(&bq->mutex);
-	if (bq && bq->shutdown_complete) {
-		mutex_unlock(&bq->mutex);
-		return -ENODEV;
-	}
-
-	ret = regmap_update_bits(bq->chip->regmap, BQ2419X_OTG,
-					BQ2419X_OTG_ENABLE_MASK, 0x10);
-	if (ret < 0) {
-		dev_err(bq->dev, "register %d update failed with err %d",
-			BQ2419X_OTG, ret);
-		mutex_unlock(&bq->mutex);
-		return ret;
-	}
-
-	if (gpio_is_valid(bq->gpio_otg_iusb))
-		gpio_set_value(bq->gpio_otg_iusb, 0);
-
-	mutex_unlock(&bq->mutex);
-	return ret;
-}
-
-static int bq2419x_dcdc_is_enabled(struct regulator_dev *rdev)
-{
-	struct bq2419x_regulator_info *bq = rdev_get_drvdata(rdev);
-	int ret;
-	unsigned int data;
-
-	mutex_lock(&bq->mutex);
-	if (bq && bq->shutdown_complete) {
-		mutex_unlock(&bq->mutex);
-		return -ENODEV;
-	}
-	ret = regmap_read(bq->chip->regmap, BQ2419X_OTG, &data);
-	if (ret < 0) {
-		dev_err(bq->dev, "register %d read failed with err %d",
-			BQ2419X_OTG, ret);
-		mutex_unlock(&bq->mutex);
-		return ret;
-	}
-	mutex_unlock(&bq->mutex);
-	return (data & BQ2419X_OTG_ENABLE_MASK) == BQ2419X_OTG_ENABLE;
-}
-
-static struct regulator_ops bq2419x_dcdc_ops = {
-	.enable			= bq2419x_dcdc_enable,
-	.disable		= bq2419x_dcdc_disable,
-	.is_enabled		= bq2419x_dcdc_is_enabled,
-	.enable_time		= bq2419x_regulator_enable_time,
-};
-
-static void bq2419x_regulator_shutdown(struct platform_device *pdev)
-{
-	struct bq2419x_regulator_info *bq = platform_get_drvdata(pdev);
-
-	mutex_lock(&bq->mutex);
-	bq->shutdown_complete = 1;
-	mutex_unlock(&bq->mutex);
-}
-
-static int __devinit bq2419x_regulator_probe(struct platform_device *pdev)
-{
-	struct bq2419x_regulator_platform_data *pdata = NULL;
-	struct bq2419x_platform_data *chip_pdata;
-	struct regulator_dev *rdev;
-	struct bq2419x_regulator_info *bq;
-	int ret;
-
-	chip_pdata = dev_get_platdata(pdev->dev.parent);
-	if (chip_pdata)
-		pdata = chip_pdata->reg_pdata;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "No Platform data");
-		return -EIO;
-	}
-
-	bq = devm_kzalloc(&pdev->dev, sizeof(*bq), GFP_KERNEL);
-	if (!bq) {
-		dev_err(&pdev->dev, "Memory allocation failed\n");
-		return -ENOMEM;
-	}
-
-	bq->dev = &pdev->dev;
-	bq->chip = dev_get_drvdata(pdev->dev.parent);
-
-	bq->gpio_otg_iusb = pdata->gpio_otg_iusb;
-	bq->power_off_on_suspend = pdata->power_off_on_suspend;
-	bq->desc.name = "bq2419x-vbus";
-	bq->desc.id = 0;
-	bq->desc.ops = &bq2419x_dcdc_ops;
-	bq->desc.type = REGULATOR_VOLTAGE;
-	bq->desc.owner = THIS_MODULE;
-	bq->shutdown_complete = 0;
-	mutex_init(&bq->mutex);
-
-	platform_set_drvdata(pdev, bq);
-
-	if (gpio_is_valid(bq->gpio_otg_iusb)) {
-		ret = gpio_request(bq->gpio_otg_iusb, dev_name(&pdev->dev));
-		if (ret < 0) {
-			dev_err(&pdev->dev,
-				"gpio request failed, err = %d\n", ret);
-			return ret;
-		}
-		gpio_direction_output(bq->gpio_otg_iusb, 0);
-	}
-
-	/* Register the regulators */
-	rdev = regulator_register(&bq->desc, &pdev->dev,
-			pdata->reg_init_data, bq, NULL);
-	if (IS_ERR(rdev)) {
-		ret = PTR_ERR(rdev);
-		dev_err(bq->dev, "regulator register failed, err %d\n", ret);
-		goto err_init;
-	}
-
-	bq->rdev = rdev;
-
-	ret = regmap_update_bits(bq->chip->regmap, BQ2419X_OTG,
-					BQ2419X_OTG_ENABLE_MASK, 0x10);
-	if (ret < 0) {
-		dev_err(bq->dev, "register %d update failed with err %d",
-			BQ2419X_OTG, ret);
-		goto err_reg_update;
-	}
-	return 0;
-
-err_reg_update:
-	regulator_unregister(bq->rdev);
-err_init:
-	if (gpio_is_valid(bq->gpio_otg_iusb))
-		gpio_free(bq->gpio_otg_iusb);
-	mutex_destroy(&bq->mutex);
-	return ret;
-}
-
-static int __devexit bq2419x_regulator_remove(struct platform_device *pdev)
-{
-	struct bq2419x_regulator_info *bq = platform_get_drvdata(pdev);
-
-	mutex_destroy(&bq->mutex);
-	regulator_unregister(bq->rdev);
-	if (gpio_is_valid(bq->gpio_otg_iusb))
-		gpio_free(bq->gpio_otg_iusb);
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int bq2419x_reg_suspend(struct device *dev)
-{
-	struct bq2419x_regulator_info *bq = dev_get_drvdata(dev);
-
-	if (bq->power_off_on_suspend && bq2419x_dcdc_is_enabled(bq->rdev) > 0)
-		bq2419x_dcdc_disable(bq->rdev);
-	return 0;
-}
-
-static int bq2419x_reg_resume(struct device *dev)
-{
-	struct bq2419x_regulator_info *bq = dev_get_drvdata(dev);
-
-	/* Turn on regulator that might be turned off by bq2419x_reg_suspend()
-	 * and that should be turned on according to the regulators properties.
-	 */
-	if (bq->power_off_on_suspend &&
-		(bq->rdev->use_count > 0 || bq->rdev->constraints->always_on))
-		bq2419x_dcdc_enable(bq->rdev);
-	return 0;
-}
-
-static const struct dev_pm_ops bq2419x_reg_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(bq2419x_reg_suspend, bq2419x_reg_resume)
-};
-#endif
-
-static struct platform_driver bq2419x_regulator_driver = {
-	.driver = {
-		.name = "bq2419x-pmic",
-		.owner = THIS_MODULE,
-#ifdef CONFIG_PM_SLEEP
-		.pm = &bq2419x_reg_pm_ops,
-#endif
-	},
-	.probe = bq2419x_regulator_probe,
-	.shutdown = bq2419x_regulator_shutdown,
-	.remove = __devexit_p(bq2419x_regulator_remove),
-};
-
-static int __init bq2419x_init(void)
-{
-	return platform_driver_register(&bq2419x_regulator_driver);
-}
-subsys_initcall(bq2419x_init);
-
-static void __exit bq2419x_cleanup(void)
-{
-	platform_driver_unregister(&bq2419x_regulator_driver);
-}
-module_exit(bq2419x_cleanup);
-
-MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
-MODULE_DESCRIPTION("BQ2419X voltage regulator driver");
-MODULE_LICENSE("GPL v2");