Pull release into acpica branch

29 files changed, 1686 insertions, 360 deletions

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index ddc741e6ecbf..309eb557f9a3 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -146,7 +146,7 @@ config I82365
 
 config TCIC
 	tristate "Databook TCIC host bridge support"
-	depends on PCMCIA
+	depends on PCMCIA && ISA
 	select PCCARD_NONSTATIC
 	help
 	  Say Y here to include support for the Databook TCIC family of PCMCIA
@@ -154,6 +154,16 @@ config TCIC
 	  "Bridge" is the name used for the hardware inside your computer that
 	  PCMCIA cards are plugged into. If unsure, say N.
 
+config PCMCIA_M8XX
+        tristate "MPC8xx PCMCIA support"
+        depends on PCMCIA && PPC && 8xx 
+        select PCCARD_NONSTATIC
+        help
+        Say Y here to include support for PowerPC 8xx series PCMCIA
+        controller.
+
+        This driver is also available as a module called m8xx_pcmcia.
+
 config HD64465_PCMCIA
 	tristate "HD64465 host bridge support"
 	depends on HD64465 && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index a41fbb38fdcb..bcecf5133b7e 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_PD6729)				+= pd6729.o
 obj-$(CONFIG_I82365)				+= i82365.o
 obj-$(CONFIG_I82092)				+= i82092.o
 obj-$(CONFIG_TCIC)				+= tcic.o
+obj-$(CONFIG_PCMCIA_M8XX)			+= m8xx_pcmcia.o
 obj-$(CONFIG_HD64465_PCMCIA)			+= hd64465_ss.o
 obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_core.o sa1100_cs.o
 obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_core.o sa1111_cs.o
@@ -42,12 +43,14 @@ pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
 au1x00_ss-y					+= au1000_generic.o
 au1x00_ss-$(CONFIG_MIPS_PB1000)			+= au1000_pb1x00.o
 au1x00_ss-$(CONFIG_MIPS_PB1100)			+= au1000_pb1x00.o
+au1x00_ss-$(CONFIG_MIPS_PB1200)			+= au1000_db1x00.o
 au1x00_ss-$(CONFIG_MIPS_PB1500)			+= au1000_pb1x00.o
 au1x00_ss-$(CONFIG_MIPS_DB1000)			+= au1000_db1x00.o
 au1x00_ss-$(CONFIG_MIPS_DB1100)			+= au1000_db1x00.o
+au1x00_ss-$(CONFIG_MIPS_DB1200)			+= au1000_db1x00.o
 au1x00_ss-$(CONFIG_MIPS_DB1500)			+= au1000_db1x00.o
 au1x00_ss-$(CONFIG_MIPS_DB1550)			+= au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_XXS1500)               += au1000_xxs1500.o
+au1x00_ss-$(CONFIG_MIPS_XXS1500)		+= au1000_xxs1500.o
 
 sa1111_cs-y					+= sa1111_generic.o
 sa1111_cs-$(CONFIG_ASSABET_NEPONSET)		+= sa1100_neponset.o
@@ -57,6 +60,7 @@ sa1111_cs-$(CONFIG_SA1100_JORNADA720)		+= sa1100_jornada720.o
 sa1100_cs-y					+= sa1100_generic.o
 sa1100_cs-$(CONFIG_SA1100_ASSABET)		+= sa1100_assabet.o
 sa1100_cs-$(CONFIG_SA1100_CERF)			+= sa1100_cerf.o
+sa1100_cs-$(CONFIG_SA1100_COLLIE)              += pxa2xx_sharpsl.o
 sa1100_cs-$(CONFIG_SA1100_H3600)		+= sa1100_h3600.o
 sa1100_cs-$(CONFIG_SA1100_SHANNON)		+= sa1100_shannon.o
 sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
index 42cf8bfbcc98..abc13f28ba3f 100644
--- a/drivers/pcmcia/au1000_db1x00.c
+++ b/drivers/pcmcia/au1000_db1x00.c
@@ -30,6 +30,7 @@
  *
  */
 
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -40,7 +41,15 @@
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/db1x00.h>
+
+#if defined(CONFIG_MIPS_DB1200)
+	#include <db1200.h>
+#elif defined(CONFIG_MIPS_PB1200)
+	#include <pb1200.h>
+#else
+	#include <asm/mach-db1x00/db1x00.h>
+	static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+#endif
 
 #include "au1000_generic.h"
 
@@ -50,7 +59,6 @@
 #define debug(x,args...)
 #endif
 
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 
 struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
 extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
@@ -59,6 +67,8 @@ static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
 {
 #ifdef CONFIG_MIPS_DB1550
 	skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
+#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+	skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
 #else
 	skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
 #endif
@@ -85,11 +95,19 @@ db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state
 	switch (skt->nr) {
 	case 0:
 		vs = bcsr->status & 0x3;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+		inserted = BOARD_CARD_INSERTED(0);
+#else
 		inserted = !(bcsr->status & (1<<4));
+#endif
 		break;
 	case 1:
 		vs = (bcsr->status & 0xC)>>2;
+#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
+		inserted = BOARD_CARD_INSERTED(1);
+#else
 		inserted = !(bcsr->status & (1<<5));
+#endif
 		break;
 	default:/* should never happen */
 		return;
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 470ef756252e..87302c548c24 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -42,7 +42,7 @@
 #include <linux/notifier.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -490,7 +490,7 @@ int au1x00_drv_pcmcia_remove(struct device *dev)
 		flush_scheduled_work();
 		skt->ops->hw_shutdown(skt);
 		au1x00_pcmcia_config_skt(skt, &dead_socket);
-		iounmap(skt->virt_io);
+		iounmap(skt->virt_io + (u32)mips_io_port_base);
 		skt->virt_io = NULL;
 	}
 
@@ -519,36 +519,15 @@ static int au1x00_drv_pcmcia_probe(struct device *dev)
 }
 
 
-static int au1x00_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
-
-static int au1x00_drv_pcmcia_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-		ret = pcmcia_socket_dev_resume(dev);
-	return ret;
-}
-
-
 static struct device_driver au1x00_pcmcia_driver = {
 	.probe		= au1x00_drv_pcmcia_probe,
 	.remove		= au1x00_drv_pcmcia_remove,
 	.name		= "au1x00-pcmcia",
 	.bus		= &platform_bus_type,
-	.suspend	= au1x00_drv_pcmcia_suspend,
-	.resume		= au1x00_drv_pcmcia_resume
+	.suspend	= pcmcia_socket_dev_suspend,
+	.resume		= pcmcia_socket_dev_resume,
 };
 
-static struct platform_device au1x00_device = {
-	.name = "au1x00-pcmcia",
-	.id = 0,
-};
 
 /* au1x00_pcmcia_init()
  *
@@ -562,7 +541,6 @@ static int __init au1x00_pcmcia_init(void)
 	int error = 0;
 	if ((error = driver_register(&au1x00_pcmcia_driver)))
 		return error;
-	platform_device_register(&au1x00_device);
 	return error;
 }
 
@@ -573,7 +551,6 @@ static int __init au1x00_pcmcia_init(void)
 static void __exit au1x00_pcmcia_exit(void)
 {
 	driver_unregister(&au1x00_pcmcia_driver);
-	platform_device_unregister(&au1x00_device);
 }
 
 module_init(au1x00_pcmcia_init);
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index d5122b1ea94b..f2c970b5f4ff 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -22,6 +22,8 @@
 #define __ASM_AU1000_PCMCIA_H
 
 /* include the world */
+#include <linux/config.h>
+
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
@@ -44,13 +46,13 @@
 /* pcmcia socket 1 needs external glue logic so the memory map
  * differs from board to board.
  */
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_PB1200)
 #define AU1X_SOCK1_IO        0xF08000000
 #define AU1X_SOCK1_PHYS_ATTR 0xF48000000
 #define AU1X_SOCK1_PHYS_MEM  0xF88000000
 #define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
 #define AU1X_SOCK1_PSEUDO_PHYS_MEM  0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || defined(CONFIG_MIPS_DB1200)
 #define AU1X_SOCK1_IO        0xF04000000
 #define AU1X_SOCK1_PHYS_ATTR 0xF44000000
 #define AU1X_SOCK1_PHYS_MEM  0xF84000000
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index d414a3bb50b9..fd5522ede867 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -21,6 +21,7 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  */
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -30,7 +31,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/proc_fs.h>
-#include <linux/version.h>
 #include <linux/types.h>
 
 #include <pcmcia/cs_types.h>
diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c
index f113b69d699b..01874b0bb03b 100644
--- a/drivers/pcmcia/au1000_xxs1500.c
+++ b/drivers/pcmcia/au1000_xxs1500.c
@@ -27,7 +27,6 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/config.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
@@ -35,7 +34,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/proc_fs.h>
-#include <linux/version.h>
 #include <linux/types.h>
 
 #include <pcmcia/cs_types.h>
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 1d755e20880c..3f6d51d11374 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -228,6 +228,11 @@ int cb_alloc(struct pcmcia_socket * s)
 	pci_bus_size_bridges(bus);
 	pci_bus_assign_resources(bus);
 	cardbus_assign_irqs(bus, s->pci_irq);
+
+	/* socket specific tune function */
+	if (s->tune_bridge)
+		s->tune_bridge(s, bus);
+
 	pci_enable_bridges(bus);
 	pci_bus_add_devices(bus);
 
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 3afb682255a0..2dc3e611a9a3 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -334,10 +334,8 @@ void destroy_cis_cache(struct pcmcia_socket *s)
 	/*
 	 * If there was a fake CIS, destroy that as well.
 	 */
-	if (s->fake_cis) {
-		kfree(s->fake_cis);
-		s->fake_cis = NULL;
-	}
+	kfree(s->fake_cis);
+	s->fake_cis = NULL;
 }
 EXPORT_SYMBOL(destroy_cis_cache);
 
@@ -386,10 +384,8 @@ int verify_cis_cache(struct pcmcia_socket *s)
 
 int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis)
 {
-    if (s->fake_cis != NULL) {
-	kfree(s->fake_cis);
-	s->fake_cis = NULL;
-    }
+    kfree(s->fake_cis);
+    s->fake_cis = NULL;
     if (cis->Length > CISTPL_MAX_CIS_SIZE)
 	return CS_BAD_SIZE;
     s->fake_cis = kmalloc(cis->Length, GFP_KERNEL);
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index fabd3529cebc..a30aa74304a2 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -331,10 +331,8 @@ static void shutdown_socket(struct pcmcia_socket *s)
 	cb_free(s);
 #endif
 	s->functions = 0;
-	if (s->config) {
-		kfree(s->config);
-		s->config = NULL;
-	}
+	kfree(s->config);
+	s->config = NULL;
 
 	{
 		int status;
@@ -515,6 +513,11 @@ static int socket_insert(struct pcmcia_socket *skt)
 	ret = socket_setup(skt, setup_delay);
 	if (ret == CS_SUCCESS) {
 		skt->state |= SOCKET_PRESENT;
+
+		printk(KERN_NOTICE "pccard: %s card inserted into slot %d\n",
+		       (skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
+		       skt->sock);
+
 #ifdef CONFIG_CARDBUS
 		if (skt->state & SOCKET_CARDBUS) {
 			cb_alloc(skt);
@@ -600,6 +603,7 @@ static int socket_resume(struct pcmcia_socket *skt)
 
 static void socket_remove(struct pcmcia_socket *skt)
 {
+	printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock);
 	socket_shutdown(skt);
 	cs_socket_put(skt);
 }
@@ -689,6 +693,9 @@ static int pccardd(void *__skt)
 		schedule();
 		try_to_freeze();
 	}
+	/* make sure we are running before we exit */
+	set_current_state(TASK_RUNNING);
+
 	remove_wait_queue(&skt->thread_wait, &wait);
 
 	/* remove from the device core */
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 080608c7381a..7f8219f3fd9e 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -544,6 +544,9 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f
 	list_add_tail(&p_dev->socket_device_list, &s->devices_list);
 	spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
 
+	printk(KERN_NOTICE "pcmcia: registering new device %s\n",
+	       p_dev->devname);
+
 	pcmcia_device_query(p_dev);
 
 	if (device_register(&p_dev->dev)) {
@@ -1157,7 +1160,8 @@ static struct pcmcia_callback pcmcia_bus_callback = {
 	.requery = pcmcia_bus_rescan,
 };
 
-static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev)
+static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev,
+					   struct class_interface *class_intf)
 {
 	struct pcmcia_socket *socket = class_get_devdata(class_dev);
 	int ret;
@@ -1192,7 +1196,8 @@ static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev)
 	return 0;
 }
 
-static void pcmcia_bus_remove_socket(struct class_device *class_dev)
+static void pcmcia_bus_remove_socket(struct class_device *class_dev,
+				     struct class_interface *class_intf)
 {
 	struct pcmcia_socket *socket = class_get_devdata(class_dev);
 
diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c
index 316f8bcc878b..561706ba4499 100644
--- a/drivers/pcmcia/hd64465_ss.c
+++ b/drivers/pcmcia/hd64465_ss.c
@@ -37,7 +37,7 @@
 #include <asm/errno.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 #include <asm/hd64465/hd64465.h>
@@ -844,27 +844,11 @@ static void hs_exit_socket(hs_socket_t *sp)
 	local_irq_restore(flags);
 }
 
-static int hd64465_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
-
-static int hd64465_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-		ret = pcmcia_socket_dev_resume(dev);
-	return ret;
-}
-
 static struct device_driver hd64465_driver = {
 	.name = "hd64465-pcmcia",
 	.bus = &platform_bus_type,
-	.suspend = hd64465_suspend,
-	.resume = hd64465_resume,
+	.suspend = pcmcia_socket_dev_suspend,
+	.resume = pcmcia_socket_dev_resume,
 };
 
 static struct platform_device hd64465_device = {
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index a713015e8228..4d56bc9926d6 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -47,7 +47,7 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/bitops.h>
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -1332,33 +1332,14 @@ static struct pccard_operations pcic_operations = {
 
 /*====================================================================*/
 
-static int i82365_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
-
-static int i82365_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-		ret = pcmcia_socket_dev_resume(dev);
-	return ret;
-}
-
 static struct device_driver i82365_driver = {
 	.name = "i82365",
 	.bus = &platform_bus_type,
-	.suspend = i82365_suspend,
-	.resume = i82365_resume,
+	.suspend = pcmcia_socket_dev_suspend,
+	.resume = pcmcia_socket_dev_resume,
 };
 
-static struct platform_device i82365_device = {
-	.name = "i82365",
-	.id = 0,
-};
+static struct platform_device *i82365_device;
 
 static int __init init_i82365(void)
 {
@@ -1368,7 +1349,14 @@ static int __init init_i82365(void)
     if (ret)
 	return ret;
 
-    ret = platform_device_register(&i82365_device);
+    i82365_device = platform_device_alloc("i82365", 0);
+    if (i82365_device) {
+	    ret = platform_device_add(i82365_device);
+	    if (ret)
+		    platform_device_put(i82365_device);
+    } else
+	    ret = -ENOMEM;
+
     if (ret) {
 	driver_unregister(&i82365_driver);
 	return ret;
@@ -1381,7 +1369,8 @@ static int __init init_i82365(void)
 
     if (sockets == 0) {
 	printk("not found.\n");
-	platform_device_unregister(&i82365_device);
+	platform_device_unregister(i82365_device);
+	release_region(i365_base, 2);
 	driver_unregister(&i82365_driver);
 	return -ENODEV;
     }
@@ -1392,7 +1381,7 @@ static int __init init_i82365(void)
     
     /* register sockets with the pcmcia core */
     for (i = 0; i < sockets; i++) {
-	    socket[i].socket.dev.dev = &i82365_device.dev;
+	    socket[i].socket.dev.dev = &i82365_device->dev;
 	    socket[i].socket.ops = &pcic_operations;
 	    socket[i].socket.resource_ops = &pccard_nonstatic_ops;
 	    socket[i].socket.owner = THIS_MODULE;
@@ -1430,7 +1419,7 @@ static void __exit exit_i82365(void)
 	    if (socket[i].flags & IS_REGISTERED)
 		    pcmcia_unregister_socket(&socket[i].socket);
     }
-    platform_device_unregister(&i82365_device);
+    platform_device_unregister(i82365_device);
     if (poll_interval != 0)
 	del_timer_sync(&poll_timer);
     if (grab_irq != 0)
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 65f3ee3d4d3c..078579ae6359 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -23,7 +23,7 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/bitops.h>
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -355,9 +355,10 @@ static void add_pcc_socket(ulong base, int irq, ulong mapaddr, kio_addr_t ioaddr
 #ifndef CONFIG_PLAT_USRV
 	/* insert interrupt */
 	request_irq(irq, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
+#ifndef CONFIG_PLAT_MAPPI3
 	/* eject interrupt */
 	request_irq(irq+1, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
-
+#endif
 	debug(3, "m32r_cfc: enable CFMSK, RDYSEL\n");
 	pcc_set(pcc_sockets, (unsigned int)PLD_CFIMASK, 0x01);
 #endif	/* CONFIG_PLAT_USRV */
@@ -731,28 +732,11 @@ static struct pccard_operations pcc_operations = {
 
 /*====================================================================*/
 
-static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
-
-static int m32r_pcc_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-		ret = pcmcia_socket_dev_resume(dev);
-	return ret;
-}
-
-
 static struct device_driver pcc_driver = {
 	.name = "cfc",
 	.bus = &platform_bus_type,
-	.suspend = m32r_pcc_suspend,
-	.resume = m32r_pcc_resume,
+	.suspend = pcmcia_socket_dev_suspend,
+	.resume = pcmcia_socket_dev_resume,
 };
 
 static struct platform_device pcc_device = {
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 7b14d7efd68c..356a6fb416a1 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -23,7 +23,7 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/bitops.h>
@@ -695,28 +695,11 @@ static struct pccard_operations pcc_operations = {
 
 /*====================================================================*/
 
-static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
-
-static int m32r_pcc_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-		ret = pcmcia_socket_dev_resume(dev);
-	return ret;
-}
-
-
 static struct device_driver pcc_driver = {
 	.name = "pcc",
 	.bus = &platform_bus_type,
-	.suspend = m32r_pcc_suspend,
-	.resume = m32r_pcc_resume,
+	.suspend = pcmcia_socket_dev_suspend,
+	.resume = pcmcia_socket_dev_resume,
 };
 
 static struct platform_device pcc_device = {
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
new file mode 100644
index 000000000000..6d9f71cfcb34
--- /dev/null
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -0,0 +1,1272 @@
+/*
+ * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
+ *
+ * (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
+ * (C) 2001-2002 Montavista Software, Inc.
+ *     <mlocke@mvista.com>
+ *
+ * Support for two slots by Cyclades Corporation
+ *     <oliver.kurth@cyclades.de>
+ * Further fixes, v2.6 kernel port
+ *     <marcelo.tosatti@cyclades.com>
+ *
+ * "The ExCA standard specifies that socket controllers should provide
+ * two IO and five memory windows per socket, which can be independently
+ * configured and positioned in the host address space and mapped to
+ * arbitrary segments of card address space. " - David A Hinds. 1999
+ *
+ * This controller does _not_ meet the ExCA standard.
+ *
+ * m8xx pcmcia controller brief info:
+ * + 8 windows (attrib, mem, i/o)
+ * + up to two slots (SLOT_A and SLOT_B)
+ * + inputpins, outputpins, event and mask registers.
+ * - no offset register. sigh.
+ *
+ * Because of the lacking offset register we must map the whole card.
+ * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
+ * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
+ * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
+ * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
+ * They are maximum 64KByte each...
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/string.h>
+
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/irq.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+#define dprintk(args...) printk(KERN_DEBUG "m8xx_pcmcia: " args);
+#else
+#define dprintk(args...)
+#endif
+
+#define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args)
+#define pcmcia_error(args...) printk(KERN_ERR "m8xx_pcmcia: "args)
+
+static const char *version = "Version 0.06, Aug 2005";
+MODULE_LICENSE("Dual MPL/GPL");
+
+#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
+
+/* The RPX series use SLOT_B */
+#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
+#define CONFIG_PCMCIA_SLOT_B
+#define CONFIG_BD_IS_MHZ
+#endif
+
+/* The ADS board use SLOT_A */
+#ifdef CONFIG_ADS
+#define CONFIG_PCMCIA_SLOT_A
+#define CONFIG_BD_IS_MHZ
+#endif
+
+/* The FADS series are a mess */
+#ifdef CONFIG_FADS
+#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
+#define CONFIG_PCMCIA_SLOT_A
+#else
+#define CONFIG_PCMCIA_SLOT_B
+#endif
+#endif
+
+/* Cyclades ACS uses both slots */
+#ifdef CONFIG_PRxK
+#define CONFIG_PCMCIA_SLOT_A
+#define CONFIG_PCMCIA_SLOT_B
+#endif
+
+#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */
+
+#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
+
+#define PCMCIA_SOCKETS_NO 2
+/* We have only 8 windows, dualsocket support will be limited. */
+#define PCMCIA_MEM_WIN_NO 2
+#define PCMCIA_IO_WIN_NO  2
+#define PCMCIA_SLOT_MSG "SLOT_A and SLOT_B"
+
+#elif defined(CONFIG_PCMCIA_SLOT_A) || defined(CONFIG_PCMCIA_SLOT_B)
+
+#define PCMCIA_SOCKETS_NO 1
+/* full support for one slot */
+#define PCMCIA_MEM_WIN_NO 5
+#define PCMCIA_IO_WIN_NO  2
+
+/* define _slot_ to be able to optimize macros */
+
+#ifdef CONFIG_PCMCIA_SLOT_A
+#define _slot_ 0
+#define PCMCIA_SLOT_MSG "SLOT_A"
+#else
+#define _slot_ 1
+#define PCMCIA_SLOT_MSG "SLOT_B"
+#endif
+
+#else
+#error m8xx_pcmcia: Bad configuration!
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0   */
+#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte     */
+#define PCMCIA_IO_WIN_BASE  _IO_BASE   /* base address for io window 0       */
+
+#define PCMCIA_SCHLVL PCMCIA_INTERRUPT /* Status Change Interrupt Level      */
+
+/* ------------------------------------------------------------------------- */
+
+/* 2.4.x and newer has this always in HZ */
+#define M8XX_BUSFREQ ((((bd_t *)&(__res))->bi_busfreq))
+
+static int pcmcia_schlvl = PCMCIA_SCHLVL;
+
+static spinlock_t events_lock = SPIN_LOCK_UNLOCKED;
+
+
+#define PCMCIA_SOCKET_KEY_5V 1
+#define PCMCIA_SOCKET_KEY_LV 2
+
+/* look up table for pgcrx registers */
+static u32 *m8xx_pgcrx[2] = {
+	&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcra,
+	&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcrb
+};
+
+/*
+ * This structure is used to address each window in the PCMCIA controller.
+ *
+ * Keep in mind that we assume that pcmcia_win[n+1] is mapped directly
+ * after pcmcia_win[n]...
+ */
+
+struct pcmcia_win {
+	u32	br;
+	u32	or;
+};
+
+/*
+ * For some reason the hardware guys decided to make both slots share
+ * some registers.
+ *
+ * Could someone invent object oriented hardware ?
+ *
+ * The macros are used to get the right bit from the registers.
+ * SLOT_A : slot = 0
+ * SLOT_B : slot = 1
+ */
+
+#define M8XX_PCMCIA_VS1(slot)      (0x80000000 >> (slot << 4))
+#define M8XX_PCMCIA_VS2(slot)      (0x40000000 >> (slot << 4))
+#define M8XX_PCMCIA_VS_MASK(slot)  (0xc0000000 >> (slot << 4))
+#define M8XX_PCMCIA_VS_SHIFT(slot) (30 - (slot << 4))
+
+#define M8XX_PCMCIA_WP(slot)       (0x20000000 >> (slot << 4))
+#define M8XX_PCMCIA_CD2(slot)      (0x10000000 >> (slot << 4))
+#define M8XX_PCMCIA_CD1(slot)      (0x08000000 >> (slot << 4))
+#define M8XX_PCMCIA_BVD2(slot)     (0x04000000 >> (slot << 4))
+#define M8XX_PCMCIA_BVD1(slot)     (0x02000000 >> (slot << 4))
+#define M8XX_PCMCIA_RDY(slot)      (0x01000000 >> (slot << 4))
+#define M8XX_PCMCIA_RDY_L(slot)    (0x00800000 >> (slot << 4))
+#define M8XX_PCMCIA_RDY_H(slot)    (0x00400000 >> (slot << 4))
+#define M8XX_PCMCIA_RDY_R(slot)    (0x00200000 >> (slot << 4))
+#define M8XX_PCMCIA_RDY_F(slot)    (0x00100000 >> (slot << 4))
+#define M8XX_PCMCIA_MASK(slot)     (0xFFFF0000 >> (slot << 4))
+
+#define M8XX_PCMCIA_POR_VALID    0x00000001
+#define M8XX_PCMCIA_POR_WRPROT   0x00000002
+#define M8XX_PCMCIA_POR_ATTRMEM  0x00000010
+#define M8XX_PCMCIA_POR_IO       0x00000018
+#define M8XX_PCMCIA_POR_16BIT    0x00000040
+
+#define M8XX_PGCRX(slot)  m8xx_pgcrx[slot]
+
+#define M8XX_PGCRX_CXOE    0x00000080
+#define M8XX_PGCRX_CXRESET 0x00000040
+
+/* we keep one lookup table per socket to check flags */
+
+#define PCMCIA_EVENTS_MAX 5  /* 4 max at a time + termination */
+
+struct event_table {
+	u32 regbit;
+	u32 eventbit;
+};
+
+struct socket_info {
+	void	(*handler)(void *info, u32 events);
+	void	*info;
+
+	u32 slot;
+
+	socket_state_t state;
+	struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
+	struct pccard_io_map  io_win[PCMCIA_IO_WIN_NO];
+	struct event_table events[PCMCIA_EVENTS_MAX];
+	struct pcmcia_socket socket;
+};
+
+static struct socket_info socket[PCMCIA_SOCKETS_NO];
+
+/*
+ * Search this table to see if the windowsize is
+ * supported...
+ */
+
+#define M8XX_SIZES_NO 32
+
+static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] =
+{
+	0x00000001, 0x00000002, 0x00000008, 0x00000004,
+	0x00000080, 0x00000040, 0x00000010, 0x00000020,
+	0x00008000, 0x00004000, 0x00001000, 0x00002000,
+	0x00000100, 0x00000200, 0x00000800, 0x00000400,
+
+	0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0x01000000, 0x02000000, 0xffffffff, 0x04000000,
+	0x00010000, 0x00020000, 0x00080000, 0x00040000,
+	0x00800000, 0x00400000, 0x00100000, 0x00200000
+};
+
+/* ------------------------------------------------------------------------- */
+
+static irqreturn_t m8xx_interrupt(int irq, void *dev, struct pt_regs *regs);
+
+#define PCMCIA_BMT_LIMIT (15*4)  /* Bus Monitor Timeout value */
+
+/* ------------------------------------------------------------------------- */
+/* board specific stuff:                                                     */
+/* voltage_set(), hardware_enable() and hardware_disable()                   */
+/* ------------------------------------------------------------------------- */
+/* RPX Boards from Embedded Planet                                           */
+
+#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
+
+/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
+ * SYPCR is write once only, therefore must the slowest memory be faster
+ * than the bus monitor or we will get a machine check due to the bus timeout.
+ */
+
+#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
+
+#undef PCMCIA_BMT_LIMIT
+#define PCMCIA_BMT_LIMIT (6*8)
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u32 reg = 0;
+
+	switch(vcc) {
+	case 0: break;
+	case 33:
+		reg |= BCSR1_PCVCTL4;
+		break;
+	case 50:
+		reg |= BCSR1_PCVCTL5;
+		break;
+	default:
+		return 1;
+	}
+
+	switch(vpp) {
+	case 0: break;
+	case 33:
+	case 50:
+		if(vcc == vpp)
+			reg |= BCSR1_PCVCTL6;
+		else
+			return 1;
+		break;
+	case 120:
+		reg |= BCSR1_PCVCTL7;
+	default:
+		return 1;
+	}
+
+	if(!((vcc == 50) || (vcc == 0)))
+		return 1;
+
+	/* first, turn off all power */
+
+	out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) & ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5 | BCSR1_PCVCTL6 | BCSR1_PCVCTL7));
+
+	/* enable new powersettings */
+
+	out_be32(((u32 *)RPX_CSR_ADDR), in_be32(((u32 *)RPX_CSR_ADDR)) | reg);
+
+	return 0;
+}
+
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
+#define hardware_enable(_slot_)  /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
+
+#endif /* CONFIG_RPXCLASSIC */
+
+/* FADS Boards from Motorola                                               */
+
+#if defined(CONFIG_FADS)
+
+#define PCMCIA_BOARD_MSG "FADS"
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u32 reg = 0;
+
+	switch(vcc) {
+		case 0:
+			break;
+		case 33:
+			reg |= BCSR1_PCCVCC0;
+			break;
+		case 50:
+			reg |= BCSR1_PCCVCC1;
+			break;
+		default:
+			return 1;
+	}
+
+	switch(vpp) {
+		case 0:
+			break;
+		case 33:
+		case 50:
+			if(vcc == vpp)
+				reg |= BCSR1_PCCVPP1;
+			else
+				return 1;
+			break;
+		case 120:
+			if ((vcc == 33) || (vcc == 50))
+				reg |= BCSR1_PCCVPP0;
+			else
+				return 1;
+		default:
+			return 1;
+	}
+
+	/* first, turn off all power */
+	out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK));
+
+	/* enable new powersettings */
+	out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) | reg);
+
+	return 0;
+}
+
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
+
+static void hardware_enable(int slot)
+{
+	out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) & ~BCSR1_PCCEN);
+}
+
+static void hardware_disable(int slot)
+{
+	out_be32(&((u32 *)BCSR1), in_be32(&((u32 *)BCSR1)) |  BCSR1_PCCEN);
+}
+
+#endif
+
+/* ------------------------------------------------------------------------- */
+/* Motorola MBX860                                                           */
+
+#if defined(CONFIG_MBX)
+
+#define PCMCIA_BOARD_MSG "MBX"
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u8 reg = 0;
+
+	switch(vcc) {
+		case 0:
+			break;
+		case 33:
+			reg |= CSR2_VCC_33;
+			break;
+		case 50:
+			reg |= CSR2_VCC_50;
+			break;
+		default:
+			return 1;
+	}
+
+	switch(vpp) {
+		case 0:
+			break;
+		case 33:
+		case 50:
+			if(vcc == vpp)
+				reg |= CSR2_VPP_VCC;
+			else
+				return 1;
+			break;
+		case 120:
+			if ((vcc == 33) || (vcc == 50))
+				reg |= CSR2_VPP_12;
+			else
+				return 1;
+		default:
+			return 1;
+	}
+
+	/* first, turn off all power */
+	out_8(&((u8 *)MBX_CSR2_ADDR), in_8(&((u8 *)MBX_CSR2_ADDR)) & ~(CSR2_VCC_MASK | CSR2_VPP_MASK));
+
+	/* enable new powersettings */
+	out_8(&((u8 *)MBX_CSR2_ADDR), in_8(&((u8 *)MBX_CSR2_ADDR)) | reg);
+
+	return 0;
+}
+
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
+#define hardware_enable(_slot_)  /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
+
+#endif /* CONFIG_MBX */
+
+#if defined(CONFIG_PRxK)
+#include <asm/cpld.h>
+extern volatile fpga_pc_regs *fpga_pc;
+
+#define PCMCIA_BOARD_MSG "MPC855T"
+
+static int voltage_set(int slot, int vcc, int vpp)
+{
+	u8 reg = 0;
+	u8 regread;
+	cpld_regs *ccpld = get_cpld();
+
+	switch(vcc) {
+		case 0:
+			break;
+		case 33:
+			reg |= PCMCIA_VCC_33;
+			break;
+		case 50:
+			reg |= PCMCIA_VCC_50;
+			break;
+		default:
+			return 1;
+	}
+
+	switch(vpp) {
+		case 0:
+			break;
+		case 33:
+		case 50:
+			if(vcc == vpp)
+				reg |= PCMCIA_VPP_VCC;
+			else
+				return 1;
+			break;
+		case 120:
+			if ((vcc == 33) || (vcc == 50))
+				reg |= PCMCIA_VPP_12;
+			else
+				return 1;
+		default:
+			return 1;
+	}
+
+	reg = reg >> (slot << 2);
+	regread = in_8(&ccpld->fpga_pc_ctl);
+	if (reg != (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
+		/* enable new powersettings */
+		regread = regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2));
+		out_8(&ccpld->fpga_pc_ctl, reg | regread);
+		msleep(100);
+	}
+
+	return 0;
+}
+
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV
+#define hardware_enable(_slot_)  /* No hardware to enable */
+#define hardware_disable(_slot_) /* No hardware to disable */
+
+#endif /* CONFIG_PRxK */
+
+static void m8xx_shutdown(void)
+{
+	u32 m, i;
+	struct pcmcia_win *w;
+
+	for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
+		w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+
+		out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, M8XX_PCMCIA_MASK(i));
+		out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) & ~M8XX_PCMCIA_MASK(i));
+
+		/* turn off interrupt and disable CxOE */
+		out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
+
+		/* turn off memory windows */
+		for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+			out_be32(&w->or, 0); /* set to not valid */
+			w++;
+		}
+
+		/* turn off voltage */
+		voltage_set(i, 0, 0);
+
+		/* disable external hardware */
+		hardware_disable(i);
+	}
+
+	free_irq(pcmcia_schlvl, NULL);
+}
+
+static struct device_driver m8xx_driver = {
+        .name = "m8xx-pcmcia",
+        .bus = &platform_bus_type,
+        .suspend = pcmcia_socket_dev_suspend,
+        .resume = pcmcia_socket_dev_resume,
+};
+
+static struct platform_device m8xx_device = {
+        .name = "m8xx-pcmcia",
+        .id = 0,
+};
+
+static u32 pending_events[PCMCIA_SOCKETS_NO];
+static spinlock_t pending_event_lock = SPIN_LOCK_UNLOCKED;
+
+static irqreturn_t m8xx_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+	struct socket_info *s;
+	struct event_table *e;
+	unsigned int i, events, pscr, pipr, per;
+
+	dprintk("Interrupt!\n");
+	/* get interrupt sources */
+
+	pscr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr);
+	pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
+	per = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per);
+
+	for(i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+		s = &socket[i];
+		e = &s->events[0];
+		events = 0;
+
+		while(e->regbit) {
+			if(pscr & e->regbit)
+				events |= e->eventbit;
+
+				e++;
+		}
+
+		/*
+		 * report only if both card detect signals are the same
+		 * not too nice done,
+		 * we depend on that CD2 is the bit to the left of CD1...
+		 */
+		if(events & SS_DETECT)
+			if(((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^
+				(pipr & M8XX_PCMCIA_CD1(i)))
+			{
+				events &= ~SS_DETECT;
+			}
+
+#ifdef PCMCIA_GLITCHY_CD
+		/*
+		 * I've experienced CD problems with my ADS board.
+		 * We make an extra check to see if there was a
+		 * real change of Card detection.
+		 */
+
+		if((events & SS_DETECT) &&
+		   ((pipr &
+		     (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) &&
+		   (s->state.Vcc | s->state.Vpp)) {
+			events &= ~SS_DETECT;
+			/*printk( "CD glitch workaround - CD = 0x%08x!\n",
+				(pipr & (M8XX_PCMCIA_CD2(i)
+					 | M8XX_PCMCIA_CD1(i))));*/
+		}
+#endif
+
+		/* call the handler */
+
+		dprintk("slot %u: events = 0x%02x, pscr = 0x%08x, "
+			"pipr = 0x%08x\n",
+			i, events, pscr, pipr);
+
+		if(events) {
+			spin_lock(&pending_event_lock);
+			pending_events[i] |= events;
+			spin_unlock(&pending_event_lock);
+			/*
+			 * Turn off RDY_L bits in the PER mask on
+			 * CD interrupt receival.
+			 *
+			 * They can generate bad interrupts on the
+			 * ACS4,8,16,32.   - marcelo
+			 */
+			per &= ~M8XX_PCMCIA_RDY_L(0);
+			per &= ~M8XX_PCMCIA_RDY_L(1);
+
+			out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, per);
+
+			if (events)
+				pcmcia_parse_events(&socket[i].socket, events);
+		}
+	}
+
+	/* clear the interrupt sources */
+	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, pscr);
+
+	dprintk("Interrupt done.\n");
+
+	return IRQ_HANDLED;
+}
+
+static u32 m8xx_get_graycode(u32 size)
+{
+	u32 k;
+
+	for(k = 0; k < M8XX_SIZES_NO; k++)
+		if(m8xx_size_to_gray[k] == size)
+			break;
+
+	if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
+		k = -1;
+
+	return k;
+}
+
+static u32 m8xx_get_speed(u32 ns, u32 is_io)
+{
+	u32 reg, clocks, psst, psl, psht;
+
+	if(!ns) {
+
+		/*
+		 * We get called with IO maps setup to 0ns
+		 * if not specified by the user.
+		 * They should be 255ns.
+		 */
+
+		if(is_io)
+			ns = 255;
+		else
+			ns = 100;  /* fast memory if 0 */
+	}
+
+	/*
+	 * In PSST, PSL, PSHT fields we tell the controller
+	 * timing parameters in CLKOUT clock cycles.
+	 * CLKOUT is the same as GCLK2_50.
+	 */
+
+/* how we want to adjust the timing - in percent */
+
+#define ADJ 180 /* 80 % longer accesstime - to be sure */
+
+	clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
+	clocks = (clocks * ADJ) / (100*1000);
+	if(clocks >= PCMCIA_BMT_LIMIT) {
+		printk( "Max access time limit reached\n");
+		clocks = PCMCIA_BMT_LIMIT-1;
+	}
+
+	psst = clocks / 7;          /* setup time */
+	psht = clocks / 7;          /* hold time */
+	psl  = (clocks * 5) / 7;    /* strobe length */
+
+	psst += clocks - (psst + psht + psl);
+
+	reg =  psst << 12;
+	reg |= psl  << 7;
+	reg |= psht << 16;
+
+	return reg;
+}
+
+static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
+{
+	int lsock = container_of(sock, struct socket_info, socket)->slot;
+	struct socket_info *s = &socket[lsock];
+	unsigned int pipr, reg;
+
+	pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
+
+	*value  = ((pipr & (M8XX_PCMCIA_CD1(lsock)
+			    | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
+	*value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0;
+
+	if (s->state.flags & SS_IOCARD)
+		*value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_STSCHG : 0;
+	else {
+		*value |= (pipr & M8XX_PCMCIA_RDY(lsock)) ? SS_READY : 0;
+		*value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_BATDEAD : 0;
+		*value |= (pipr & M8XX_PCMCIA_BVD2(lsock)) ? SS_BATWARN : 0;
+	}
+
+	if (s->state.Vcc | s->state.Vpp)
+		*value |= SS_POWERON;
+
+	/*
+	 * Voltage detection:
+	 * This driver only supports 16-Bit pc-cards.
+	 * Cardbus is not handled here.
+	 *
+	 * To determine what voltage to use we must read the VS1 and VS2 pin.
+	 * Depending on what socket type is present,
+	 * different combinations mean different things.
+	 *
+	 * Card Key  Socket Key   VS1   VS2   Card         Vcc for CIS parse
+	 *
+	 * 5V        5V, LV*      NC    NC    5V only       5V (if available)
+	 *
+	 * 5V        5V, LV*      GND   NC    5 or 3.3V     as low as possible
+	 *
+	 * 5V        5V, LV*      GND   GND   5, 3.3, x.xV  as low as possible
+	 *
+	 * LV*       5V            -     -    shall not fit into socket
+	 *
+	 * LV*       LV*          GND   NC    3.3V only     3.3V
+	 *
+	 * LV*       LV*          NC    GND   x.xV          x.xV (if avail.)
+	 *
+	 * LV*       LV*          GND   GND   3.3 or x.xV   as low as possible
+	 *
+	 * *LV means Low Voltage
+	 *
+	 *
+	 * That gives us the following table:
+	 *
+	 * Socket    VS1  VS2   Voltage
+	 *
+	 * 5V        NC   NC    5V
+	 * 5V        NC   GND   none (should not be possible)
+	 * 5V        GND  NC    >= 3.3V
+	 * 5V        GND  GND   >= x.xV
+	 *
+	 * LV        NC   NC    5V   (if available)
+	 * LV        NC   GND   x.xV (if available)
+	 * LV        GND  NC    3.3V
+	 * LV        GND  GND   >= x.xV
+	 *
+	 * So, how do I determine if I have a 5V or a LV
+	 * socket on my board?  Look at the socket!
+	 *
+	 *
+	 * Socket with 5V key:
+	 * ++--------------------------------------------+
+	 * ||                                            |
+	 * ||                                           ||
+	 * ||                                           ||
+	 * |                                             |
+	 * +---------------------------------------------+
+	 *
+	 * Socket with LV key:
+	 * ++--------------------------------------------+
+	 * ||                                            |
+	 * |                                            ||
+	 * |                                            ||
+	 * |                                             |
+	 * +---------------------------------------------+
+	 *
+	 *
+	 * With other words - LV only cards does not fit
+	 * into the 5V socket!
+	 */
+
+	/* read out VS1 and VS2 */
+
+	reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock))
+		>> M8XX_PCMCIA_VS_SHIFT(lsock);
+
+	if(socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) {
+		switch(reg) {
+		case 1:
+			*value |= SS_3VCARD;
+			break; /* GND, NC - 3.3V only */
+		case 2:
+			*value |= SS_XVCARD;
+			break; /* NC. GND - x.xV only */
+		};
+	}
+
+	dprintk("GetStatus(%d) = %#2.2x\n", lsock, *value);
+	return 0;
+}
+
+static int m8xx_get_socket(struct pcmcia_socket *sock, socket_state_t *state)
+{
+	int lsock = container_of(sock, struct socket_info, socket)->slot;
+	*state = socket[lsock].state; /* copy the whole structure */
+
+	dprintk("GetSocket(%d) = flags %#3.3x, Vcc %d, Vpp %d, "
+	      "io_irq %d, csc_mask %#2.2x\n", lsock, state->flags,
+	      state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
+	return 0;
+}
+
+static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
+{
+	int lsock = container_of(sock, struct socket_info, socket)->slot;
+	struct socket_info *s = &socket[lsock];
+	struct event_table *e;
+	unsigned int reg;
+	unsigned long flags;
+
+	dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+	      "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
+	      state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
+
+	/* First, set voltage - bail out if invalid */
+	if(voltage_set(lsock, state->Vcc, state->Vpp))
+		return -EINVAL;
+
+	/* Take care of reset... */
+	if(state->flags & SS_RESET)
+		out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) |  M8XX_PGCRX_CXRESET); /* active high */
+	else
+		out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET);
+
+	/* ... and output enable. */
+
+	/* The CxOE signal is connected to a 74541 on the ADS.
+	   I guess most other boards used the ADS as a reference.
+	   I tried to control the CxOE signal with SS_OUTPUT_ENA,
+	   but the reset signal seems connected via the 541.
+	   If the CxOE is left high are some signals tristated and
+	   no pullups are present -> the cards act wierd.
+	   So right now the buffers are enabled if the power is on. */
+
+	if(state->Vcc || state->Vpp)
+		out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */
+	else
+		out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE);
+
+	/*
+	 * We'd better turn off interrupts before
+	 * we mess with the events-table..
+	 */
+
+	spin_lock_irqsave(&events_lock, flags);
+
+	/*
+	 * Play around with the interrupt mask to be able to
+	 * give the events the generic pcmcia driver wants us to.
+	 */
+
+	e = &s->events[0];
+	reg = 0;
+
+	if(state->csc_mask & SS_DETECT) {
+		e->eventbit = SS_DETECT;
+		reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock)
+				    | M8XX_PCMCIA_CD1(lsock));
+		e++;
+	}
+	if(state->flags & SS_IOCARD) {
+		/*
+		 * I/O card
+		 */
+		if(state->csc_mask & SS_STSCHG) {
+			e->eventbit = SS_STSCHG;
+			reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
+			e++;
+		}
+		/*
+		 * If io_irq is non-zero we should enable irq.
+		 */
+		if(state->io_irq) {
+			out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(state->io_irq) << 24);
+			/*
+			 * Strange thing here:
+			 * The manual does not tell us which interrupt
+			 * the sources generate.
+			 * Anyhow, I found out that RDY_L generates IREQLVL.
+			 *
+			 * We use level triggerd interrupts, and they don't
+			 * have to be cleared in PSCR in the interrupt handler.
+			 */
+			reg |= M8XX_PCMCIA_RDY_L(lsock);
+		}
+		else
+			out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff);
+	}
+	else {
+		/*
+		 * Memory card
+		 */
+		if(state->csc_mask & SS_BATDEAD) {
+			e->eventbit = SS_BATDEAD;
+			reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock);
+			e++;
+		}
+		if(state->csc_mask & SS_BATWARN) {
+			e->eventbit = SS_BATWARN;
+			reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock);
+			e++;
+		}
+		/* What should I trigger on - low/high,raise,fall? */
+		if(state->csc_mask & SS_READY) {
+			e->eventbit = SS_READY;
+			reg |= e->regbit = 0; //??
+			e++;
+		}
+	}
+
+	e->regbit = 0;  /* terminate list */
+
+	/*
+	 * Clear the status changed .
+	 * Port A and Port B share the same port.
+	 * Writing ones will clear the bits.
+	 */
+
+	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, reg);
+
+	/*
+	 * Write the mask.
+	 * Port A and Port B share the same port.
+	 * Need for read-modify-write.
+	 * Ones will enable the interrupt.
+	 */
+
+	/*
+	  reg |= ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per
+	  & M8XX_PCMCIA_MASK(lsock);
+	*/
+
+	reg |= in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
+		(M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
+
+	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, reg);
+
+	spin_unlock_irqrestore(&events_lock, flags);
+
+	/* copy the struct and modify the copy */
+
+	s->state = *state;
+
+	return 0;
+}
+
+static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
+{
+	int lsock = container_of(sock, struct socket_info, socket)->slot;
+
+	struct socket_info *s = &socket[lsock];
+	struct pcmcia_win *w;
+	unsigned int reg, winnr;
+
+#define M8XX_SIZE (io->stop - io->start + 1)
+#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
+
+	dprintk( "SetIOMap(%d, %d, %#2.2x, %d ns, "
+	      "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
+	      io->speed, io->start, io->stop);
+
+	if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
+	    || (io->stop > 0xffff) || (io->stop < io->start))
+		return -EINVAL;
+
+	if((reg = m8xx_get_graycode(M8XX_SIZE)) == -1)
+		return -EINVAL;
+
+	if(io->flags & MAP_ACTIVE) {
+
+		dprintk( "io->flags & MAP_ACTIVE\n");
+
+		winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
+			+ (lsock * PCMCIA_IO_WIN_NO) + io->map;
+
+		/* setup registers */
+
+		w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+		w += winnr;
+
+		out_be32(&w->or, 0); /* turn off window first */
+		out_be32(&w->br, M8XX_BASE);
+
+		reg <<= 27;
+  		reg |= M8XX_PCMCIA_POR_IO |(lsock << 2);
+
+		reg |= m8xx_get_speed(io->speed, 1);
+
+		if(io->flags & MAP_WRPROT)
+			reg |= M8XX_PCMCIA_POR_WRPROT;
+
+		/*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/
+		if(io->flags & MAP_16BIT)
+			reg |= M8XX_PCMCIA_POR_16BIT;
+
+		if(io->flags & MAP_ACTIVE)
+			reg |= M8XX_PCMCIA_POR_VALID;
+
+		out_be32(&w->or, reg);
+
+		dprintk("Socket %u: Mapped io window %u at %#8.8x, "
+		      "OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
+	} else {
+		/* shutdown IO window */
+		winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
+			+ (lsock * PCMCIA_IO_WIN_NO) + io->map;
+
+		/* setup registers */
+
+		w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+		w += winnr;
+
+		out_be32(&w->or, 0); /* turn off window */
+		out_be32(&w->br, 0); /* turn off base address */
+
+		dprintk("Socket %u: Unmapped io window %u at %#8.8x, "
+			"OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
+	}
+
+	/* copy the struct and modify the copy */
+	s->io_win[io->map] = *io;
+	s->io_win[io->map].flags &= (MAP_WRPROT
+				     | MAP_16BIT
+				     | MAP_ACTIVE);
+	dprintk("SetIOMap exit\n");
+
+	return 0;
+}
+
+static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem)
+{
+	int lsock = container_of(sock, struct socket_info, socket)->slot;
+	struct socket_info *s = &socket[lsock];
+	struct pcmcia_win *w;
+	struct pccard_mem_map *old;
+	unsigned int reg, winnr;
+
+	dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, "
+	      "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+	      mem->speed, mem->static_start, mem->card_start);
+
+	if ((mem->map >= PCMCIA_MEM_WIN_NO)
+//	    || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
+	    || (mem->card_start >= 0x04000000)
+	    || (mem->static_start & 0xfff)                /* 4KByte resolution */
+	    || (mem->card_start & 0xfff))
+		return -EINVAL;
+
+	if((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) {
+		printk( "Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE);
+		return -EINVAL;
+	}
+	reg <<= 27;
+
+	winnr = (lsock * PCMCIA_MEM_WIN_NO) + mem->map;
+
+	/* Setup the window in the pcmcia controller */
+
+	w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+	w += winnr;
+
+	reg |= lsock << 2;
+
+	reg |= m8xx_get_speed(mem->speed, 0);
+
+	if(mem->flags & MAP_ATTRIB)
+		reg |=  M8XX_PCMCIA_POR_ATTRMEM;
+
+	if(mem->flags & MAP_WRPROT)
+		reg |= M8XX_PCMCIA_POR_WRPROT;
+
+	if(mem->flags & MAP_16BIT)
+		reg |= M8XX_PCMCIA_POR_16BIT;
+
+	if(mem->flags & MAP_ACTIVE)
+		reg |= M8XX_PCMCIA_POR_VALID;
+
+	out_be32(&w->or, reg);
+
+	dprintk("Socket %u: Mapped memory window %u at %#8.8x, "
+	      "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
+
+	if(mem->flags & MAP_ACTIVE) {
+		/* get the new base address */
+		mem->static_start = PCMCIA_MEM_WIN_BASE +
+			(PCMCIA_MEM_WIN_SIZE * winnr)
+			+ mem->card_start;
+	}
+
+	dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
+	      "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
+	      mem->speed, mem->static_start, mem->card_start);
+
+	/* copy the struct and modify the copy */
+
+	old = &s->mem_win[mem->map];
+
+	*old = *mem;
+	old->flags &= (MAP_ATTRIB
+		       | MAP_WRPROT
+		       | MAP_16BIT
+		       | MAP_ACTIVE);
+
+	return 0;
+}
+
+static int m8xx_sock_init(struct pcmcia_socket *sock)
+{
+	int i;
+	pccard_io_map io = { 0, 0, 0, 0, 1 };
+	pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };
+
+	dprintk( "sock_init(%d)\n", s);
+
+	m8xx_set_socket(sock, &dead_socket);
+	for (i = 0; i < PCMCIA_IO_WIN_NO; i++) {
+		io.map = i;
+		m8xx_set_io_map(sock, &io);
+	}
+	for (i = 0; i < PCMCIA_MEM_WIN_NO; i++) {
+		mem.map = i;
+		m8xx_set_mem_map(sock, &mem);
+	}
+
+	return 0;
+
+}
+
+static int m8xx_suspend(struct pcmcia_socket *sock)
+{
+	return m8xx_set_socket(sock, &dead_socket);
+}
+
+static struct pccard_operations m8xx_services = {
+	.init	= m8xx_sock_init,
+	.suspend = m8xx_suspend,
+	.get_status = m8xx_get_status,
+	.get_socket = m8xx_get_socket,
+	.set_socket = m8xx_set_socket,
+	.set_io_map = m8xx_set_io_map,
+	.set_mem_map = m8xx_set_mem_map,
+};
+
+static int __init m8xx_init(void)
+{
+	struct pcmcia_win *w;
+	unsigned int i,m;
+
+	pcmcia_info("%s\n", version);
+
+	if (driver_register(&m8xx_driver))
+		return -1;
+
+	pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
+		    " with IRQ %u.\n", pcmcia_schlvl);
+
+	/* Configure Status change interrupt */
+
+	if(request_irq(pcmcia_schlvl, m8xx_interrupt, 0,
+			  "m8xx_pcmcia", NULL)) {
+		pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
+			     pcmcia_schlvl);
+		return -1;
+	}
+
+	w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+
+	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr,
+		M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+
+	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per,
+		in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
+		~(M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1)));
+
+/* connect interrupt and disable CxOE */
+
+	out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
+	out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
+
+/* intialize the fixed memory windows */
+
+	for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
+		for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+			out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
+				(PCMCIA_MEM_WIN_SIZE
+				 * (m + i * PCMCIA_MEM_WIN_NO)));
+
+			out_be32(&w->or, 0);  /* set to not valid */
+
+			w++;
+		}
+	}
+
+/* turn off voltage */
+	voltage_set(0, 0, 0);
+	voltage_set(1, 0, 0);
+
+/* Enable external hardware */
+	hardware_enable(0);
+	hardware_enable(1);
+
+	platform_device_register(&m8xx_device);
+
+	for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) {
+		socket[i].slot = i;
+		socket[i].socket.owner = THIS_MODULE;
+		socket[i].socket.features = SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP;
+		socket[i].socket.irq_mask = 0x000;
+		socket[i].socket.map_size = 0x1000;
+		socket[i].socket.io_offset = 0;
+		socket[i].socket.pci_irq = i  ? 7 : 9;
+		socket[i].socket.ops = &m8xx_services;
+		socket[i].socket.resource_ops = &pccard_nonstatic_ops;
+		socket[i].socket.cb_dev = NULL;
+		socket[i].socket.dev.dev = &m8xx_device.dev;
+	}
+
+	for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
+		pcmcia_register_socket(&socket[i].socket);
+
+	return 0;
+}
+
+static void __exit m8xx_exit(void)
+{
+	int i;
+
+	for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
+		pcmcia_unregister_socket(&socket[i].socket);
+
+	m8xx_shutdown();
+
+	platform_device_unregister(&m8xx_device);
+	driver_unregister(&m8xx_driver);
+}
+
+module_init(m8xx_init);
+module_exit(m8xx_exit);
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 08d1c9288264..47b5ade95bde 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -22,7 +22,6 @@
 
 #include <asm/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/sizes.h>
 
 #include <asm/arch/mux.h>
@@ -330,27 +329,13 @@ static int __devexit omap_cf_remove(struct device *dev)
 	return 0;
 }
 
-static int omap_cf_suspend(struct device *dev, pm_message_t mesg, u32 level)
-{
-	if (level != SUSPEND_SAVE_STATE)
-		return 0;
-	return pcmcia_socket_dev_suspend(dev, mesg);
-}
-
-static int omap_cf_resume(struct device *dev, u32 level)
-{
-	if (level != RESUME_RESTORE_STATE)
-		return 0;
-	return pcmcia_socket_dev_resume(dev);
-}
-
 static struct device_driver omap_cf_driver = {
 	.name		= (char *) driver_name,
 	.bus		= &platform_bus_type,
 	.probe		= omap_cf_probe,
 	.remove		= __devexit_p(omap_cf_remove),
-	.suspend 	= omap_cf_suspend,
-	.resume 	= omap_cf_resume,
+	.suspend 	= pcmcia_socket_dev_suspend,
+	.resume 	= pcmcia_socket_dev_resume,
 };
 
 static int __init omap_cf_init(void)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 325c992f7d8f..7fa18fb814bc 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -205,32 +206,20 @@ int pxa2xx_drv_pcmcia_probe(struct device *dev)
 }
 EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe);
 
-static int pxa2xx_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
 {
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
+	struct pcmcia_low_level *ops = dev->platform_data;
+	int nr = ops ? ops->nr : 0;
 
-static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-	{
-		struct pcmcia_low_level *ops = dev->platform_data;
-		int nr = ops ? ops->nr : 0;
-
-		MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
-		ret = pcmcia_socket_dev_resume(dev);
-	}
-	return ret;
+	MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
+
+	return pcmcia_socket_dev_resume(dev);
 }
 
 static struct device_driver pxa2xx_pcmcia_driver = {
 	.probe		= pxa2xx_drv_pcmcia_probe,
 	.remove		= soc_common_drv_pcmcia_remove,
-	.suspend 	= pxa2xx_drv_pcmcia_suspend,
+	.suspend 	= pcmcia_socket_dev_suspend,
 	.resume 	= pxa2xx_drv_pcmcia_resume,
 	.name		= "pxa2xx-pcmcia",
 	.bus		= &platform_bus_type,
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index bbe69b07ce50..5209d8c7764f 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -17,7 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
 #include <pcmcia/ss.h>
 
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index a1178a600e3c..56c58831e80e 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -16,17 +16,26 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 
+#include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
 
 #include "soc_common.h"
 
 #define	NO_KEEP_VS 0x0001
 
+/* PCMCIA to Scoop linkage
+
+   There is no easy way to link multiple scoop devices into one
+   single entity for the pxa2xx_pcmcia device so this structure
+   is used which is setup by the platform code
+*/
+struct scoop_pcmcia_config *platform_scoop_config;
+#define SCOOP_DEV platform_scoop_config->devs
+
 static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
 {
 	reset_scoop(scoopdev->dev);
@@ -38,36 +47,16 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-	/*
-	 * Setup default state of GPIO outputs
-	 * before we enable them as outputs.
-	 */
-	GPSR(GPIO48_nPOE) =
-		GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |
-		GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) |
-		GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	if (platform_scoop_config->pcmcia_init)
+		platform_scoop_config->pcmcia_init();
 
 	/* Register interrupts */
-	if (scoop_devs[skt->nr].cd_irq >= 0) {
+	if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
 		struct pcmcia_irqs cd_irq;
 
 		cd_irq.sock = skt->nr;
-		cd_irq.irq  = scoop_devs[skt->nr].cd_irq;
-		cd_irq.str  = scoop_devs[skt->nr].cd_irq_str;
+		cd_irq.irq  = SCOOP_DEV[skt->nr].cd_irq;
+		cd_irq.str  = SCOOP_DEV[skt->nr].cd_irq_str;
 		ret = soc_pcmcia_request_irqs(skt, &cd_irq, 1);
 
 		if (ret) {
@@ -76,19 +65,19 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 		}
 	}
 
-	skt->irq = scoop_devs[skt->nr].irq;
+	skt->irq = SCOOP_DEV[skt->nr].irq;
 
 	return 0;
 }
 
 static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	if (scoop_devs[skt->nr].cd_irq >= 0) {
+	if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
 		struct pcmcia_irqs cd_irq;
 
 		cd_irq.sock = skt->nr;
-		cd_irq.irq  = scoop_devs[skt->nr].cd_irq;
-		cd_irq.str  = scoop_devs[skt->nr].cd_irq_str;
+		cd_irq.irq  = SCOOP_DEV[skt->nr].cd_irq;
+		cd_irq.str  = SCOOP_DEV[skt->nr].cd_irq_str;
 		soc_pcmcia_free_irqs(skt, &cd_irq, 1);
 	}
 }
@@ -98,9 +87,9 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 				    struct pcmcia_state *state)
 {
 	unsigned short cpr, csr;
-	struct device *scoop = scoop_devs[skt->nr].dev;
+	struct device *scoop = SCOOP_DEV[skt->nr].dev;
 
-	cpr = read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR);
+	cpr = read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR);
 
 	write_scoop_reg(scoop, SCOOP_IRM, 0x00FF);
 	write_scoop_reg(scoop, SCOOP_ISR, 0x0000);
@@ -109,21 +98,25 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	if (csr & 0x0004) {
 		/* card eject */
 		write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
-		scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
+		SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
 	}
-	else if (!(scoop_devs[skt->nr].keep_vs & NO_KEEP_VS)) {
+	else if (!(SCOOP_DEV[skt->nr].keep_vs & NO_KEEP_VS)) {
 		/* keep vs1,vs2 */
 		write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
-		csr |= scoop_devs[skt->nr].keep_vs;
+		csr |= SCOOP_DEV[skt->nr].keep_vs;
 	}
 	else if (cpr & 0x0003) {
 		/* power on */
 		write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
-		scoop_devs[skt->nr].keep_vs = (csr & 0x00C0);
+		SCOOP_DEV[skt->nr].keep_vs = (csr & 0x00C0);
 	}
 	else {
 		/* card detect */
-		write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
+	        if ((machine_is_spitz() || machine_is_borzoi()) && skt->nr == 1) {
+	                write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
+	        } else {
+		        write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
+	        }
 	}
 
 	state->detect = (csr & 0x0004) ? 0 : 1;
@@ -137,7 +130,6 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) {
 		printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr);
 	}
-
 }
 
 
@@ -145,7 +137,7 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				       const socket_state_t *state)
 {
 	unsigned long flags;
-	struct device *scoop = scoop_devs[skt->nr].dev;
+	struct device *scoop = SCOOP_DEV[skt->nr].dev;
 
 	unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr;
 
@@ -170,8 +162,13 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 	nccr = (ccr = read_scoop_reg(scoop, SCOOP_CCR)) & ~0x0080;
 	nimr = (imr = read_scoop_reg(scoop, SCOOP_IMR)) & ~0x003E;
 
-	ncpr |= (state->Vcc == 33) ? 0x0001 :
-				(state->Vcc == 50) ? 0x0002 : 0;
+	if ((machine_is_spitz() || machine_is_borzoi() || machine_is_akita()) && skt->nr == 0) {
+	        ncpr |= (state->Vcc == 33) ? 0x0002 :
+		        (state->Vcc == 50) ? 0x0002 : 0;
+	} else {
+	        ncpr |= (state->Vcc == 33) ? 0x0001 :
+		        (state->Vcc == 50) ? 0x0002 : 0;
+	}
 	nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0;
 	ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0;
 	nccr |= (state->flags&SS_RESET)? 0x0080: 0;
@@ -183,18 +180,22 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 			((skt->status&SS_WRPROT) ? 0x0008 : 0);
 
 	if (!(ncpr & 0x0003)) {
-		scoop_devs[skt->nr].keep_rd = 0;
-	} else if (!scoop_devs[skt->nr].keep_rd) {
+		SCOOP_DEV[skt->nr].keep_rd = 0;
+	} else if (!SCOOP_DEV[skt->nr].keep_rd) {
 		if (nccr & 0x0080)
-			scoop_devs[skt->nr].keep_rd = 1;
+			SCOOP_DEV[skt->nr].keep_rd = 1;
 		else
 			nccr |= 0x0080;
 	}
 
 	if (mcr != nmcr)
 		write_scoop_reg(scoop, SCOOP_MCR, nmcr);
-	if (cpr != ncpr)
-		write_scoop_reg(scoop, SCOOP_CPR, ncpr);
+	if (cpr != ncpr) {
+		if (platform_scoop_config->power_ctrl)
+			platform_scoop_config->power_ctrl(scoop, ncpr , skt->nr);
+		else
+		        write_scoop_reg(scoop, SCOOP_CPR, ncpr);
+	}
 	if (ccr != nccr)
 		write_scoop_reg(scoop, SCOOP_CCR, nccr);
 	if (imr != nimr)
@@ -207,39 +208,62 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 {
-	sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
+	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
 
 	/* Enable interrupt */
-	write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0);
-	write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101);
-	scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
+	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
+	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
+	SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
+
+	if (machine_is_collie())
+		/* We need to disable SS_OUTPUT_ENA here. */
+		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
 }
 
 static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 {
 	/* CF_BUS_OFF */
-	sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
+	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
+
+	if (machine_is_collie())
+		/* We need to disable SS_OUTPUT_ENA here. */
+		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
 }
 
 static struct pcmcia_low_level sharpsl_pcmcia_ops = {
-	.owner				= THIS_MODULE,
-	.hw_init			= sharpsl_pcmcia_hw_init,
-	.hw_shutdown		= sharpsl_pcmcia_hw_shutdown,
-	.socket_state		= sharpsl_pcmcia_socket_state,
-	.configure_socket	= sharpsl_pcmcia_configure_socket,
-	.socket_init		= sharpsl_pcmcia_socket_init,
-	.socket_suspend		= sharpsl_pcmcia_socket_suspend,
-	.first				= 0,
-	.nr					= 0,
+	.owner                  = THIS_MODULE,
+	.hw_init                = sharpsl_pcmcia_hw_init,
+	.hw_shutdown            = sharpsl_pcmcia_hw_shutdown,
+	.socket_state           = sharpsl_pcmcia_socket_state,
+	.configure_socket       = sharpsl_pcmcia_configure_socket,
+	.socket_init            = sharpsl_pcmcia_socket_init,
+	.socket_suspend         = sharpsl_pcmcia_socket_suspend,
+	.first                  = 0,
+	.nr                     = 0,
 };
 
+#ifdef CONFIG_SA1100_COLLIE
+#include "sa11xx_base.h"
+
+int __init pcmcia_collie_init(struct device *dev)
+{
+       int ret = -ENODEV;
+
+       if (machine_is_collie())
+               ret = sa11xx_drv_pcmcia_probe(dev, &sharpsl_pcmcia_ops, 0, 1);
+
+       return ret;
+}
+
+#else
+
 static struct platform_device *sharpsl_pcmcia_device;
 
 static int __init sharpsl_pcmcia_init(void)
 {
 	int ret;
 
-	sharpsl_pcmcia_ops.nr=scoop_num;
+	sharpsl_pcmcia_ops.nr=platform_scoop_config->num_devs;
 	sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL);
 	if (!sharpsl_pcmcia_device)
 		return -ENOMEM;
@@ -247,7 +271,7 @@ static int __init sharpsl_pcmcia_init(void)
 	memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device));
 	sharpsl_pcmcia_device->name = "pxa2xx-pcmcia";
 	sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
-	sharpsl_pcmcia_device->dev.parent=scoop_devs[0].dev;
+	sharpsl_pcmcia_device->dev.parent=platform_scoop_config->devs[0].dev;
 
 	ret = platform_device_register(sharpsl_pcmcia_device);
 	if (ret)
@@ -269,6 +293,7 @@ static void __exit sharpsl_pcmcia_exit(void)
 
 fs_initcall(sharpsl_pcmcia_init);
 module_exit(sharpsl_pcmcia_exit);
+#endif
 
 MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support");
 MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index c42455d20eb6..00960a379b9c 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -691,7 +691,7 @@ static int adjust_memory(struct pcmcia_socket *s, unsigned int action, unsigned
 	unsigned long size = end - start + 1;
 	int ret = 0;
 
-	if (end <= start)
+	if (end < start)
 		return -EINVAL;
 
 	down(&rsrc_sem);
@@ -724,7 +724,7 @@ static int adjust_io(struct pcmcia_socket *s, unsigned int action, unsigned long
 	unsigned long size = end - start + 1;
 	int ret = 0;
 
-	if (end <= start)
+	if (end < start)
 		return -EINVAL;
 
 	if (end > IO_SPACE_LIMIT)
@@ -779,7 +779,7 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
 	if (!s->cb_dev || !s->cb_dev->bus)
 		return -ENODEV;
 
-#if defined(CONFIG_X86) || defined(CONFIG_X86_64)
+#if defined(CONFIG_X86)
 	/* If this is the root bus, the risk of hitting
 	 * some strange system devices which aren't protected
 	 * by either ACPI resource tables or properly requested
@@ -817,7 +817,7 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
 
 	/* if we got at least one of IO, and one of MEM, we can be glad and
 	 * activate the PCMCIA subsystem */
-	if (done & (IORESOURCE_MEM | IORESOURCE_IO))
+	if (done == (IORESOURCE_MEM | IORESOURCE_IO))
 		s->resource_setup_done = 1;
 
 	return 0;
@@ -925,7 +925,7 @@ static ssize_t store_io_db(struct class_device *class_dev, const char *buf, size
 				return -EINVAL;
 		}
 	}
-	if (end_addr <= start_addr)
+	if (end_addr < start_addr)
 		return -EINVAL;
 
 	ret = adjust_io(s, add, start_addr, end_addr);
@@ -977,7 +977,7 @@ static ssize_t store_mem_db(struct class_device *class_dev, const char *buf, siz
 				return -EINVAL;
 		}
 	}
-	if (end_addr <= start_addr)
+	if (end_addr < start_addr)
 		return -EINVAL;
 
 	ret = adjust_memory(s, add, start_addr, end_addr);
@@ -994,7 +994,8 @@ static struct class_device_attribute *pccard_rsrc_attributes[] = {
 	NULL,
 };
 
-static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev)
+static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev,
+					   struct class_interface *class_intf)
 {
 	struct pcmcia_socket *s = class_get_devdata(class_dev);
 	struct class_device_attribute **attr;
@@ -1011,7 +1012,8 @@ static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev)
 	return ret;
 }
 
-static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev)
+static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev,
+					       struct class_interface *class_intf)
 {
 	struct pcmcia_socket *s = class_get_devdata(class_dev);
 	struct class_device_attribute **attr;
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index d4ed508b38be..6d441ec75c6a 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -33,13 +33,18 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/config.h>
+#include <linux/platform_device.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 
+#include <asm/hardware/scoop.h>
+
 #include "sa1100_generic.h"
 
+int __init pcmcia_collie_init(struct device *dev);
+
 static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
 #ifdef CONFIG_SA1100_ASSABET
 	pcmcia_assabet_init,
@@ -56,6 +61,9 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
 #ifdef CONFIG_SA1100_SIMPAD
 	pcmcia_simpad_init,
 #endif
+#ifdef CONFIG_SA1100_COLLIE
+       pcmcia_collie_init,
+#endif
 };
 
 static int sa11x0_drv_pcmcia_probe(struct device *dev)
@@ -74,29 +82,13 @@ static int sa11x0_drv_pcmcia_probe(struct device *dev)
 	return ret;
 }
 
-static int sa11x0_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
-
-static int sa11x0_drv_pcmcia_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-		ret = pcmcia_socket_dev_resume(dev);
-	return ret;
-}
-
 static struct device_driver sa11x0_pcmcia_driver = {
 	.probe		= sa11x0_drv_pcmcia_probe,
 	.remove		= soc_common_drv_pcmcia_remove,
 	.name		= "sa11x0-pcmcia",
 	.bus		= &platform_bus_type,
-	.suspend 	= sa11x0_drv_pcmcia_suspend,
-	.resume 	= sa11x0_drv_pcmcia_resume,
+	.suspend 	= pcmcia_socket_dev_suspend,
+	.resume 	= pcmcia_socket_dev_resume,
 };
 
 /* sa11x0_pcmcia_init()
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index bb90a1448a53..81ded52c8959 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -122,7 +122,7 @@ void sa1111_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 
 static int pcmcia_probe(struct sa1111_dev *dev)
 {
-	char *base;
+	void __iomem *base;
 
 	if (!request_mem_region(dev->res.start, 512,
 				SA1111_DRIVER_NAME(dev)))
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 888b70e6a484..9e7ccd8a4321 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -66,7 +66,7 @@ void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
 	if (pc_debug > lvl) {
 		printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func);
 		va_start(args, fmt);
-		printk(fmt, args);
+		vprintk(fmt, args);
 		va_end(args);
 	}
 }
@@ -321,8 +321,6 @@ soc_common_pcmcia_get_socket(struct pcmcia_socket *sock, socket_state_t *state)
  * less punt all of this work and let the kernel handle the details
  * of power configuration, reset, &c. We also record the value of
  * `state' in order to regurgitate it to the PCMCIA core later.
- *
- * Returns: 0
  */
 static int
 soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
@@ -407,7 +405,7 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
  * the map speed as requested, but override the address ranges
  * supplied by Card Services.
  *
- * Returns: 0 on success, -1 on error
+ * Returns: 0 on success, -ERRNO on error
  */
 static int
 soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
@@ -655,8 +653,8 @@ static void soc_pcmcia_cpufreq_unregister(void)
 }
 
 #else
-#define soc_pcmcia_cpufreq_register()
-#define soc_pcmcia_cpufreq_unregister()
+static int soc_pcmcia_cpufreq_register(void) { return 0; }
+static void soc_pcmcia_cpufreq_unregister(void) {}
 #endif
 
 int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
@@ -738,7 +736,7 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 			goto out_err_5;
 		}
 
-		if ( list_empty(&soc_pcmcia_sockets) )
+		if (list_empty(&soc_pcmcia_sockets))
 			soc_pcmcia_cpufreq_register();
 
 		list_add(&skt->node, &soc_pcmcia_sockets);
@@ -839,7 +837,7 @@ int soc_common_drv_pcmcia_remove(struct device *dev)
 		release_resource(&skt->res_io);
 		release_resource(&skt->res_skt);
 	}
-	if ( list_empty(&soc_pcmcia_sockets) )
+	if (list_empty(&soc_pcmcia_sockets))
 		soc_pcmcia_cpufreq_unregister();
 
 	up(&soc_pcmcia_sockets_lock);
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index 1040a6c1a8a4..4a3150a7854c 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -341,7 +341,8 @@ static struct bin_attribute pccard_cis_attr = {
 	.write = pccard_store_cis,
 };
 
-static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev)
+static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev,
+					     struct class_interface *class_intf)
 {
 	struct class_device_attribute **attr;
 	int ret = 0;
@@ -357,7 +358,8 @@ static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev)
 	return ret;
 }
 
-static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev)
+static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev,
+						 struct class_interface *class_intf)
 {
 	struct class_device_attribute **attr;
 
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index d5a61eae6119..e31263864377 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -44,7 +44,7 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/bitops.h>
 
 #include <asm/io.h>
@@ -372,27 +372,11 @@ static int __init get_tcic_id(void)
 
 /*====================================================================*/
 
-static int tcic_drv_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int ret = 0;
-	if (level == SUSPEND_SAVE_STATE)
-		ret = pcmcia_socket_dev_suspend(dev, state);
-	return ret;
-}
-
-static int tcic_drv_resume(struct device *dev, u32 level)
-{
-	int ret = 0;
-	if (level == RESUME_RESTORE_STATE)
-		ret = pcmcia_socket_dev_resume(dev);
-	return ret;
-}
-
 static struct device_driver tcic_driver = {
 	.name = "tcic-pcmcia",
 	.bus = &platform_bus_type,
-	.suspend = tcic_drv_suspend,
-	.resume = tcic_drv_resume,
+	.suspend = pcmcia_socket_dev_suspend,
+	.resume = pcmcia_socket_dev_resume,
 };
 
 static struct platform_device tcic_device = {
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index fbe233e19ceb..539b5cd1a598 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -59,6 +59,7 @@
 
 #define  TI122X_SCR_SER_STEP		0xc0000000
 #define  TI122X_SCR_INTRTIE		0x20000000
+#define  TIXX21_SCR_TIEALL		0x10000000
 #define  TI122X_SCR_CBRSVD		0x00400000
 #define  TI122X_SCR_MRBURSTDN		0x00008000
 #define  TI122X_SCR_MRBURSTUP		0x00004000
@@ -153,6 +154,12 @@
 /* EnE test register */
 #define ENE_TEST_C9			0xc9	/* 8bit */
 #define ENE_TEST_C9_TLTENABLE		0x02
+#define ENE_TEST_C9_PFENABLE_F0		0x04
+#define ENE_TEST_C9_PFENABLE_F1		0x08
+#define ENE_TEST_C9_PFENABLE		(ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F0)
+#define ENE_TEST_C9_WPDISALBLE_F0	0x40
+#define ENE_TEST_C9_WPDISALBLE_F1	0x80
+#define ENE_TEST_C9_WPDISALBLE		(ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)
 
 /*
  * Texas Instruments CardBus controller overrides.
@@ -618,6 +625,7 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
 	int devfn;
 	unsigned int state;
 	int ret = 1;
+	u32 sysctl;
 
 	/* catch the two-slot controllers */
 	switch (socket->dev->device) {
@@ -640,6 +648,24 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
 		 */
 		break;
 
+	case PCI_DEVICE_ID_TI_X515:
+	case PCI_DEVICE_ID_TI_X420:
+	case PCI_DEVICE_ID_TI_X620:
+	case PCI_DEVICE_ID_TI_XX21_XX11:
+	case PCI_DEVICE_ID_TI_7410:
+	case PCI_DEVICE_ID_TI_7610:
+		/*
+		 * those are either single or dual slot CB with additional functions
+		 * like 1394, smartcard reader, etc. check the TIEALL flag for them
+		 * the TIEALL flag binds the IRQ of all functions toghether.
+		 * we catch the single slot variants later.
+		 */
+		sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+		if (sysctl & TIXX21_SCR_TIEALL)
+			return 0;
+
+		break;
+
 	/* single-slot controllers have the 2nd slot empty always :) */
 	default:
 		return 1;
@@ -652,6 +678,15 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
 	if (!func)
 		return 1;
 
+	/*
+	 * check that the device id of both slots match. this is needed for the
+	 * XX21 and the XX11 controller that share the same device id for single
+	 * and dual slot controllers. return '2nd slot empty'. we already checked
+	 * if the interrupt is tied to another function.
+	 */
+	if (socket->dev->device != func->device)
+		goto out;
+
 	slot2 = pci_get_drvdata(func);
 	if (!slot2)
 		goto out;
@@ -791,16 +826,6 @@ static int ti12xx_override(struct yenta_socket *socket)
 		config_writel(socket, TI113X_SYSTEM_CONTROL, val);
 
 	/*
-	 * for EnE bridges only: clear testbit TLTEnable. this makes the
-	 * RME Hammerfall DSP sound card working.
-	 */
-	if (socket->dev->vendor == PCI_VENDOR_ID_ENE) {
-		u8 test_c9 = config_readb(socket, ENE_TEST_C9);
-		test_c9 &= ~ENE_TEST_C9_TLTENABLE;
-		config_writeb(socket, ENE_TEST_C9, test_c9);
-	}
-
-	/*
 	 * Yenta expects controllers to use CSCINT to route
 	 * CSC interrupts to PCI rather than INTVAL.
 	 */
@@ -841,5 +866,78 @@ static int ti1250_override(struct yenta_socket *socket)
 	return ti12xx_override(socket);
 }
 
+
+/**
+ * EnE specific part. EnE bridges are register compatible with TI bridges but
+ * have their own test registers and more important their own little problems.
+ * Some fixup code to make everybody happy (TM).
+ */
+
+#ifdef CONFIG_CARDBUS
+/**
+ * set/clear various test bits:
+ * Defaults to clear the bit.
+ * - mask (u8) defines what bits to change
+ * - bits (u8) is the values to change them to
+ * -> it's
+ * 	current = (current & ~mask) | bits
+ */
+/* pci ids of devices that wants to have the bit set */
+#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) {		\
+		.vendor		= _vend,			\
+		.device		= _dev,				\
+		.subvendor	= _subvend,			\
+		.subdevice	= _subdev,			\
+		.driver_data	= ((mask) << 8 | (bits)),	\
+	}
+static struct pci_device_id ene_tune_tbl[] = {
+	/* Echo Audio products based on motorola DSP56301 and DSP56361 */
+	DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
+		ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+	DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
+		ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+
+	{}
+};
+
+static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
+{
+	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+	struct pci_dev *dev;
+	struct pci_device_id *id = NULL;
+	u8 test_c9, old_c9, mask, bits;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
+		if (id)
+			break;
+	}
+
+	test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
+	if (id) {
+		mask = (id->driver_data >> 8) & 0xFF;
+		bits = id->driver_data & 0xFF;
+
+		test_c9 = (test_c9 & ~mask) | bits;
+	}
+	else
+		/* default to clear TLTEnable bit, old behaviour */
+		test_c9 &= ~ENE_TEST_C9_TLTENABLE;
+
+	printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+	config_writeb(socket, ENE_TEST_C9, test_c9);
+}
+
+static int ene_override(struct yenta_socket *socket)
+{
+	/* install tune_bridge() function */
+	socket->socket.tune_bridge = ene_tune_bridge;
+
+	return ti1250_override(socket);
+}
+#else
+#  define ene_override ti1250_override
+#endif
+
 #endif /* _LINUX_TI113X_H */
 
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 17bb2da6752b..38a028c725d4 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -24,6 +24,7 @@
 #include <linux/spinlock.h>
 #include <linux/sched.h>
 #include <linux/types.h>
+#include <linux/platform_device.h>
 
 #include <asm/io.h>
 
@@ -774,31 +775,11 @@ static int __devinit vrc4171_card_setup(char *options)
 
 __setup("vrc4171_card=", vrc4171_card_setup);
 
-static int vrc4171_card_suspend(struct device *dev, pm_message_t state, u32 level)
-{
-	int retval = 0;
-
-	if (level == SUSPEND_SAVE_STATE)
-		retval = pcmcia_socket_dev_suspend(dev, state);
-
-	return retval;
-}
-
-static int vrc4171_card_resume(struct device *dev, u32 level)
-{
-	int retval = 0;
-
-	if (level == RESUME_RESTORE_STATE)
-		retval = pcmcia_socket_dev_resume(dev);
-
-	return retval;
-}
-
 static struct device_driver vrc4171_card_driver = {
 	.name		= vrc4171_card_name,
 	.bus		= &platform_bus_type,
-	.suspend	= vrc4171_card_suspend,
-	.resume		= vrc4171_card_resume,
+	.suspend	= pcmcia_socket_dev_suspend,
+	.resume		= pcmcia_socket_dev_resume,
 };
 
 static int __devinit vrc4171_card_init(void)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index ba4d78e5b121..ec6ab65f0872 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -151,6 +151,40 @@ static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
 	readb(socket->base + 0x800 + reg + 1);
 }
 
+static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *dev = to_pci_dev(yentadev);
+	struct yenta_socket *socket = pci_get_drvdata(dev);
+	int offset = 0, i;
+
+	offset = snprintf(buf, PAGE_SIZE, "CB registers:");
+	for (i = 0; i < 0x24; i += 4) {
+		unsigned val;
+		if (!(i & 15))
+			offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+		val = cb_readl(socket, i);
+		offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val);
+	}
+
+	offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:");
+	for (i = 0; i < 0x45; i++) {
+		unsigned char val;
+		if (!(i & 7)) {
+			if (i & 8) {
+				memcpy(buf + offset, " -", 2);
+				offset += 2;
+			} else
+				offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+		}
+		val = exca_readb(socket, i);
+		offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val);
+	}
+	buf[offset++] = '\n';
+	return offset;
+}
+
+static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL);
+
 /*
  * Ugh, mixed-mode cardbus and 16-bit pccard state: things depend
  * on what kind of card is inserted..
@@ -559,12 +593,6 @@ static void yenta_interrogate(struct yenta_socket *socket)
 static int yenta_sock_init(struct pcmcia_socket *sock)
 {
 	struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
-	u16 bridge;
-
-	bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~CB_BRIDGE_INTR;
-	if (!socket->cb_irq)
-		bridge |= CB_BRIDGE_INTR;
-	config_writew(socket, CB_BRIDGE_CONTROL, bridge);
 
 	exca_writeb(socket, I365_GBLCTL, 0x00);
 	exca_writeb(socket, I365_GENCTL, 0x00);
@@ -771,6 +799,9 @@ static void yenta_close(struct pci_dev *dev)
 {
 	struct yenta_socket *sock = pci_get_drvdata(dev);
 
+	/* Remove the register attributes */
+	device_remove_file(&dev->dev, &dev_attr_yenta_registers);
+
 	/* we don't want a dying socket registered */
 	pcmcia_unregister_socket(&sock->socket);
 	
@@ -819,6 +850,7 @@ enum {
 	CARDBUS_TYPE_TOPIC95,
 	CARDBUS_TYPE_TOPIC97,
 	CARDBUS_TYPE_O2MICRO,
+	CARDBUS_TYPE_ENE,
 };
 
 /*
@@ -865,6 +897,12 @@ static struct cardbus_type cardbus_type[] = {
 		.override	= o2micro_override,
 		.restore_state	= o2micro_restore_state,
 	},
+	[CARDBUS_TYPE_ENE]	= {
+		.override	= ene_override,
+		.save_state	= ti_save_state,
+		.restore_state	= ti_restore_state,
+		.sock_init	= ti_init,
+	},
 };
 
 
@@ -883,16 +921,8 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas
 {
 	int i;
 	unsigned long val;
-	u16 bridge_ctrl;
 	u32 mask;
 
-	/* Set up ISA irq routing to probe the ISA irqs.. */
-	bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
-	if (!(bridge_ctrl & CB_BRIDGE_INTR)) {
-		bridge_ctrl |= CB_BRIDGE_INTR;
-		config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-	}
-
 	/*
 	 * Probe for usable interrupts using the force
 	 * register to generate bogus card status events.
@@ -914,9 +944,6 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas
 
 	mask = probe_irq_mask(val) & 0xffff;
 
-	bridge_ctrl &= ~CB_BRIDGE_INTR;
-	config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
 	return mask;
 }
 
@@ -944,18 +971,11 @@ static irqreturn_t yenta_probe_handler(int irq, void *dev_id, struct pt_regs *re
 /* probes the PCI interrupt, use only on override functions */
 static int yenta_probe_cb_irq(struct yenta_socket *socket)
 {
-	u16 bridge_ctrl;
-
 	if (!socket->cb_irq)
 		return -1;
 
 	socket->probe_status = 0;
 
-	/* disable ISA interrupts */
-	bridge_ctrl = config_readw(socket, CB_BRIDGE_CONTROL);
-	bridge_ctrl &= ~CB_BRIDGE_INTR;
-	config_writew(socket, CB_BRIDGE_CONTROL, bridge_ctrl);
-
 	if (request_irq(socket->cb_irq, yenta_probe_handler, SA_SHIRQ, "yenta", socket)) {
 		printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
 		return -1;
@@ -966,7 +986,7 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
 	cb_writel(socket, CB_SOCKET_EVENT, -1);
 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
 	cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS);
-	
+
 	msleep(100);
 
 	/* disable interrupts */
@@ -1004,11 +1024,12 @@ static void yenta_config_init(struct yenta_socket *socket)
 {
 	u16 bridge;
 	struct pci_dev *dev = socket->dev;
+	struct pci_bus_region region;
 
-	pci_set_power_state(socket->dev, 0);
+	pcibios_resource_to_bus(socket->dev, &region, &dev->resource[0]);
 
 	config_writel(socket, CB_LEGACY_MODE_BASE, 0);
-	config_writel(socket, PCI_BASE_ADDRESS_0, dev->resource[0].start);
+	config_writel(socket, PCI_BASE_ADDRESS_0, region.start);
 	config_writew(socket, PCI_COMMAND,
 			PCI_COMMAND_IO |
 			PCI_COMMAND_MEMORY |
@@ -1031,8 +1052,8 @@ static void yenta_config_init(struct yenta_socket *socket)
 	 *  - PCI interrupts enabled if a PCI interrupt exists..
 	 */
 	bridge = config_readw(socket, CB_BRIDGE_CONTROL);
-	bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_INTR | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
-	bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN | CB_BRIDGE_INTR;
+	bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN);
+	bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN;
 	config_writew(socket, CB_BRIDGE_CONTROL, bridge);
 }
 
@@ -1154,8 +1175,11 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
 
 	/* Register it with the pcmcia layer.. */
 	ret = pcmcia_register_socket(&socket->socket);
-	if (ret == 0)
+	if (ret == 0) {
+		/* Add the yenta register attributes */
+		device_create_file(&dev->dev, &dev_attr_yenta_registers);
 		goto out;
+	}
 
  unmap:
 	iounmap(socket->base);
@@ -1265,10 +1289,22 @@ static struct pci_device_id yenta_table [] = {
 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250),
 	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250),
 
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, TI12XX),
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, TI12XX),
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, TI1250),
-	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX),
+	CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX),
+
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, TI12XX),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE),
+	CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE),
 
 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH),
 	CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH),