rtl818x: move rtl8180 and rtl8187 to separate subdirectories

These drivers share one header file, but nothing else.  Worse, both
drivers use the rtl8225 part with different register settings.  The
results has been some ugly naming -- let's simplify that.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>

1 files changed, 0 insertions, 1591 deletions

diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
deleted file mode 100644
index eeee244fcaab..000000000000
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ /dev/null
@@ -1,1591 +0,0 @@
-/*
- * Linux device driver for RTL8187
- *
- * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
- *
- * Based on the r8187 driver, which is:
- * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
- *
- * The driver was extended to the RTL8187B in 2008 by:
- * 	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- *	Hin-Tak Leung <htl10@users.sourceforge.net>
- *	Larry Finger <Larry.Finger@lwfinger.net>
- *
- * Magic delays and register offsets below are taken from the original
- * r8187 driver sources.  Thanks to Realtek for their support!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/usb.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/eeprom_93cx6.h>
-#include <net/mac80211.h>
-
-#include "rtl8187.h"
-#include "rtl8187_rtl8225.h"
-#ifdef CONFIG_RTL8187_LEDS
-#include "rtl8187_leds.h"
-#endif
-#include "rtl8187_rfkill.h"
-
-MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
-MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
-MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>");
-MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>");
-MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
-MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver");
-MODULE_LICENSE("GPL");
-
-static struct usb_device_id rtl8187_table[] __devinitdata = {
-	/* Asus */
-	{USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187},
-	/* Belkin */
-	{USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B},
-	/* Realtek */
-	{USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
-	{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
-	{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
-	/* Surecom */
-	{USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
-	/* Logitech */
-	{USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
-	/* Netgear */
-	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
-	/* HP */
-	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
-	/* Sitecom */
-	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
-	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
-	{USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
-	/* Sphairon Access Systems GmbH */
-	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
-	/* Dick Smith Electronics */
-	{USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
-	/* Abocom */
-	{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
-	/* Qcom */
-	{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
-	/* AirLive */
-	{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
-	/* Linksys */
-	{USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, rtl8187_table);
-
-static const struct ieee80211_rate rtl818x_rates[] = {
-	{ .bitrate = 10, .hw_value = 0, },
-	{ .bitrate = 20, .hw_value = 1, },
-	{ .bitrate = 55, .hw_value = 2, },
-	{ .bitrate = 110, .hw_value = 3, },
-	{ .bitrate = 60, .hw_value = 4, },
-	{ .bitrate = 90, .hw_value = 5, },
-	{ .bitrate = 120, .hw_value = 6, },
-	{ .bitrate = 180, .hw_value = 7, },
-	{ .bitrate = 240, .hw_value = 8, },
-	{ .bitrate = 360, .hw_value = 9, },
-	{ .bitrate = 480, .hw_value = 10, },
-	{ .bitrate = 540, .hw_value = 11, },
-};
-
-static const struct ieee80211_channel rtl818x_channels[] = {
-	{ .center_freq = 2412 },
-	{ .center_freq = 2417 },
-	{ .center_freq = 2422 },
-	{ .center_freq = 2427 },
-	{ .center_freq = 2432 },
-	{ .center_freq = 2437 },
-	{ .center_freq = 2442 },
-	{ .center_freq = 2447 },
-	{ .center_freq = 2452 },
-	{ .center_freq = 2457 },
-	{ .center_freq = 2462 },
-	{ .center_freq = 2467 },
-	{ .center_freq = 2472 },
-	{ .center_freq = 2484 },
-};
-
-static void rtl8187_iowrite_async_cb(struct urb *urb)
-{
-	kfree(urb->context);
-}
-
-static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
-				  void *data, u16 len)
-{
-	struct usb_ctrlrequest *dr;
-	struct urb *urb;
-	struct rtl8187_async_write_data {
-		u8 data[4];
-		struct usb_ctrlrequest dr;
-	} *buf;
-	int rc;
-
-	buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
-	if (!buf)
-		return;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		kfree(buf);
-		return;
-	}
-
-	dr = &buf->dr;
-
-	dr->bRequestType = RTL8187_REQT_WRITE;
-	dr->bRequest = RTL8187_REQ_SET_REG;
-	dr->wValue = addr;
-	dr->wIndex = 0;
-	dr->wLength = cpu_to_le16(len);
-
-	memcpy(buf, data, len);
-
-	usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
-			     (unsigned char *)dr, buf, len,
-			     rtl8187_iowrite_async_cb, buf);
-	usb_anchor_urb(urb, &priv->anchored);
-	rc = usb_submit_urb(urb, GFP_ATOMIC);
-	if (rc < 0) {
-		kfree(buf);
-		usb_unanchor_urb(urb);
-	}
-	usb_free_urb(urb);
-}
-
-static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
-					   __le32 *addr, u32 val)
-{
-	__le32 buf = cpu_to_le32(val);
-
-	rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
-			      &buf, sizeof(buf));
-}
-
-void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	data <<= 8;
-	data |= addr | 0x80;
-
-	rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
-	rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
-	rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
-	rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
-}
-
-static void rtl8187_tx_cb(struct urb *urb)
-{
-	struct sk_buff *skb = (struct sk_buff *)urb->context;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hw *hw = info->rate_driver_data[0];
-	struct rtl8187_priv *priv = hw->priv;
-
-	skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
-					  sizeof(struct rtl8187_tx_hdr));
-	ieee80211_tx_info_clear_status(info);
-
-	if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
-		if (priv->is_rtl8187b) {
-			skb_queue_tail(&priv->b_tx_status.queue, skb);
-
-			/* queue is "full", discard last items */
-			while (skb_queue_len(&priv->b_tx_status.queue) > 5) {
-				struct sk_buff *old_skb;
-
-				dev_dbg(&priv->udev->dev,
-					"transmit status queue full\n");
-
-				old_skb = skb_dequeue(&priv->b_tx_status.queue);
-				ieee80211_tx_status_irqsafe(hw, old_skb);
-			}
-			return;
-		} else {
-			info->flags |= IEEE80211_TX_STAT_ACK;
-		}
-	}
-	if (priv->is_rtl8187b)
-		ieee80211_tx_status_irqsafe(hw, skb);
-	else {
-		/* Retry information for the RTI8187 is only available by
-		 * reading a register in the device. We are in interrupt mode
-		 * here, thus queue the skb and finish on a work queue. */
-		skb_queue_tail(&priv->b_tx_status.queue, skb);
-		ieee80211_queue_delayed_work(hw, &priv->work, 0);
-	}
-}
-
-static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	unsigned int ep;
-	void *buf;
-	struct urb *urb;
-	__le16 rts_dur = 0;
-	u32 flags;
-	int rc;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-
-	flags = skb->len;
-	flags |= RTL818X_TX_DESC_FLAG_NO_ENC;
-
-	flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
-	if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
-		flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
-	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		flags |= RTL818X_TX_DESC_FLAG_RTS;
-		flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-		rts_dur = ieee80211_rts_duration(dev, priv->vif,
-						 skb->len, info);
-	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		flags |= RTL818X_TX_DESC_FLAG_CTS;
-		flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
-	}
-
-	if (!priv->is_rtl8187b) {
-		struct rtl8187_tx_hdr *hdr =
-			(struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
-		hdr->flags = cpu_to_le32(flags);
-		hdr->len = 0;
-		hdr->rts_duration = rts_dur;
-		hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
-		buf = hdr;
-
-		ep = 2;
-	} else {
-		/* fc needs to be calculated before skb_push() */
-		unsigned int epmap[4] = { 6, 7, 5, 4 };
-		struct ieee80211_hdr *tx_hdr =
-			(struct ieee80211_hdr *)(skb->data);
-		u16 fc = le16_to_cpu(tx_hdr->frame_control);
-
-		struct rtl8187b_tx_hdr *hdr =
-			(struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr));
-		struct ieee80211_rate *txrate =
-			ieee80211_get_tx_rate(dev, info);
-		memset(hdr, 0, sizeof(*hdr));
-		hdr->flags = cpu_to_le32(flags);
-		hdr->rts_duration = rts_dur;
-		hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
-		hdr->tx_duration =
-			ieee80211_generic_frame_duration(dev, priv->vif,
-							 skb->len, txrate);
-		buf = hdr;
-
-		if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
-			ep = 12;
-		else
-			ep = epmap[skb_get_queue_mapping(skb)];
-	}
-
-	info->rate_driver_data[0] = dev;
-	info->rate_driver_data[1] = urb;
-
-	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
-			  buf, skb->len, rtl8187_tx_cb, skb);
-	urb->transfer_flags |= URB_ZERO_PACKET;
-	usb_anchor_urb(urb, &priv->anchored);
-	rc = usb_submit_urb(urb, GFP_ATOMIC);
-	if (rc < 0) {
-		usb_unanchor_urb(urb);
-		kfree_skb(skb);
-	}
-	usb_free_urb(urb);
-
-	return NETDEV_TX_OK;
-}
-
-static void rtl8187_rx_cb(struct urb *urb)
-{
-	struct sk_buff *skb = (struct sk_buff *)urb->context;
-	struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
-	struct ieee80211_hw *dev = info->dev;
-	struct rtl8187_priv *priv = dev->priv;
-	struct ieee80211_rx_status rx_status = { 0 };
-	int rate, signal;
-	u32 flags;
-	unsigned long f;
-
-	spin_lock_irqsave(&priv->rx_queue.lock, f);
-	__skb_unlink(skb, &priv->rx_queue);
-	spin_unlock_irqrestore(&priv->rx_queue.lock, f);
-	skb_put(skb, urb->actual_length);
-
-	if (unlikely(urb->status)) {
-		dev_kfree_skb_irq(skb);
-		return;
-	}
-
-	if (!priv->is_rtl8187b) {
-		struct rtl8187_rx_hdr *hdr =
-			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
-		flags = le32_to_cpu(hdr->flags);
-		/* As with the RTL8187B below, the AGC is used to calculate
-		 * signal strength. In this case, the scaling
-		 * constants are derived from the output of p54usb.
-		 */
-		signal = -4 - ((27 * hdr->agc) >> 6);
-		rx_status.antenna = (hdr->signal >> 7) & 1;
-		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-	} else {
-		struct rtl8187b_rx_hdr *hdr =
-			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
-		/* The Realtek datasheet for the RTL8187B shows that the RX
-		 * header contains the following quantities: signal quality,
-		 * RSSI, AGC, the received power in dB, and the measured SNR.
-		 * In testing, none of these quantities show qualitative
-		 * agreement with AP signal strength, except for the AGC,
-		 * which is inversely proportional to the strength of the
-		 * signal. In the following, the signal strength
-		 * is derived from the AGC. The arbitrary scaling constants
-		 * are chosen to make the results close to the values obtained
-		 * for a BCM4312 using b43 as the driver. The noise is ignored
-		 * for now.
-		 */
-		flags = le32_to_cpu(hdr->flags);
-		signal = 14 - hdr->agc / 2;
-		rx_status.antenna = (hdr->rssi >> 7) & 1;
-		rx_status.mactime = le64_to_cpu(hdr->mac_time);
-	}
-
-	rx_status.signal = signal;
-	priv->signal = signal;
-	rate = (flags >> 20) & 0xF;
-	skb_trim(skb, flags & 0x0FFF);
-	rx_status.rate_idx = rate;
-	rx_status.freq = dev->conf.channel->center_freq;
-	rx_status.band = dev->conf.channel->band;
-	rx_status.flag |= RX_FLAG_TSFT;
-	if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
-		rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
-	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
-	ieee80211_rx_irqsafe(dev, skb);
-
-	skb = dev_alloc_skb(RTL8187_MAX_RX);
-	if (unlikely(!skb)) {
-		/* TODO check rx queue length and refill *somewhere* */
-		return;
-	}
-
-	info = (struct rtl8187_rx_info *)skb->cb;
-	info->urb = urb;
-	info->dev = dev;
-	urb->transfer_buffer = skb_tail_pointer(skb);
-	urb->context = skb;
-	skb_queue_tail(&priv->rx_queue, skb);
-
-	usb_anchor_urb(urb, &priv->anchored);
-	if (usb_submit_urb(urb, GFP_ATOMIC)) {
-		usb_unanchor_urb(urb);
-		skb_unlink(skb, &priv->rx_queue);
-		dev_kfree_skb_irq(skb);
-	}
-}
-
-static int rtl8187_init_urbs(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct urb *entry = NULL;
-	struct sk_buff *skb;
-	struct rtl8187_rx_info *info;
-	int ret = 0;
-
-	while (skb_queue_len(&priv->rx_queue) < 16) {
-		skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
-		if (!skb) {
-			ret = -ENOMEM;
-			goto err;
-		}
-		entry = usb_alloc_urb(0, GFP_KERNEL);
-		if (!entry) {
-			ret = -ENOMEM;
-			goto err;
-		}
-		usb_fill_bulk_urb(entry, priv->udev,
-				  usb_rcvbulkpipe(priv->udev,
-				  priv->is_rtl8187b ? 3 : 1),
-				  skb_tail_pointer(skb),
-				  RTL8187_MAX_RX, rtl8187_rx_cb, skb);
-		info = (struct rtl8187_rx_info *)skb->cb;
-		info->urb = entry;
-		info->dev = dev;
-		skb_queue_tail(&priv->rx_queue, skb);
-		usb_anchor_urb(entry, &priv->anchored);
-		ret = usb_submit_urb(entry, GFP_KERNEL);
-		if (ret) {
-			skb_unlink(skb, &priv->rx_queue);
-			usb_unanchor_urb(entry);
-			goto err;
-		}
-		usb_free_urb(entry);
-	}
-	return ret;
-
-err:
-	usb_free_urb(entry);
-	kfree_skb(skb);
-	usb_kill_anchored_urbs(&priv->anchored);
-	return ret;
-}
-
-static void rtl8187b_status_cb(struct urb *urb)
-{
-	struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context;
-	struct rtl8187_priv *priv = hw->priv;
-	u64 val;
-	unsigned int cmd_type;
-
-	if (unlikely(urb->status))
-		return;
-
-	/*
-	 * Read from status buffer:
-	 *
-	 * bits [30:31] = cmd type:
-	 * - 0 indicates tx beacon interrupt
-	 * - 1 indicates tx close descriptor
-	 *
-	 * In the case of tx beacon interrupt:
-	 * [0:9] = Last Beacon CW
-	 * [10:29] = reserved
-	 * [30:31] = 00b
-	 * [32:63] = Last Beacon TSF
-	 *
-	 * If it's tx close descriptor:
-	 * [0:7] = Packet Retry Count
-	 * [8:14] = RTS Retry Count
-	 * [15] = TOK
-	 * [16:27] = Sequence No
-	 * [28] = LS
-	 * [29] = FS
-	 * [30:31] = 01b
-	 * [32:47] = unused (reserved?)
-	 * [48:63] = MAC Used Time
-	 */
-	val = le64_to_cpu(priv->b_tx_status.buf);
-
-	cmd_type = (val >> 30) & 0x3;
-	if (cmd_type == 1) {
-		unsigned int pkt_rc, seq_no;
-		bool tok;
-		struct sk_buff *skb;
-		struct ieee80211_hdr *ieee80211hdr;
-		unsigned long flags;
-
-		pkt_rc = val & 0xFF;
-		tok = val & (1 << 15);
-		seq_no = (val >> 16) & 0xFFF;
-
-		spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags);
-		skb_queue_reverse_walk(&priv->b_tx_status.queue, skb) {
-			ieee80211hdr = (struct ieee80211_hdr *)skb->data;
-
-			/*
-			 * While testing, it was discovered that the seq_no
-			 * doesn't actually contains the sequence number.
-			 * Instead of returning just the 12 bits of sequence
-			 * number, hardware is returning entire sequence control
-			 * (fragment number plus sequence number) in a 12 bit
-			 * only field overflowing after some time. As a
-			 * workaround, just consider the lower bits, and expect
-			 * it's unlikely we wrongly ack some sent data
-			 */
-			if ((le16_to_cpu(ieee80211hdr->seq_ctrl)
-			    & 0xFFF) == seq_no)
-				break;
-		}
-		if (skb != (struct sk_buff *) &priv->b_tx_status.queue) {
-			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-			__skb_unlink(skb, &priv->b_tx_status.queue);
-			if (tok)
-				info->flags |= IEEE80211_TX_STAT_ACK;
-			info->status.rates[0].count = pkt_rc + 1;
-
-			ieee80211_tx_status_irqsafe(hw, skb);
-		}
-		spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags);
-	}
-
-	usb_anchor_urb(urb, &priv->anchored);
-	if (usb_submit_urb(urb, GFP_ATOMIC))
-		usb_unanchor_urb(urb);
-}
-
-static int rtl8187b_init_status_urb(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct urb *entry;
-	int ret = 0;
-
-	entry = usb_alloc_urb(0, GFP_KERNEL);
-	if (!entry)
-		return -ENOMEM;
-
-	usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9),
-			  &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf),
-			  rtl8187b_status_cb, dev);
-
-	usb_anchor_urb(entry, &priv->anchored);
-	ret = usb_submit_urb(entry, GFP_KERNEL);
-	if (ret)
-		usb_unanchor_urb(entry);
-	usb_free_urb(entry);
-
-	return ret;
-}
-
-static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon)
-{
-	u32 anaparam, anaparam2;
-	u8 anaparam3, reg;
-
-	if (!priv->is_rtl8187b) {
-		if (rfon) {
-			anaparam = RTL8187_RTL8225_ANAPARAM_ON;
-			anaparam2 = RTL8187_RTL8225_ANAPARAM2_ON;
-		} else {
-			anaparam = RTL8187_RTL8225_ANAPARAM_OFF;
-			anaparam2 = RTL8187_RTL8225_ANAPARAM2_OFF;
-		}
-	} else {
-		if (rfon) {
-			anaparam = RTL8187B_RTL8225_ANAPARAM_ON;
-			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_ON;
-			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_ON;
-		} else {
-			anaparam = RTL8187B_RTL8225_ANAPARAM_OFF;
-			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_OFF;
-			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_OFF;
-		}
-	}
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
-	if (priv->is_rtl8187b)
-		rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, anaparam3);
-	reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-}
-
-static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg;
-	int i;
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= (1 << 1);
-	reg |= RTL818X_CMD_RESET;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	i = 10;
-	do {
-		msleep(2);
-		if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
-		      RTL818X_CMD_RESET))
-			break;
-	} while (--i);
-
-	if (!i) {
-		wiphy_err(dev->wiphy, "Reset timeout!\n");
-		return -ETIMEDOUT;
-	}
-
-	/* reload registers from eeprom */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
-
-	i = 10;
-	do {
-		msleep(4);
-		if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
-		      RTL818X_EEPROM_CMD_CONFIG))
-			break;
-	} while (--i);
-
-	if (!i) {
-		wiphy_err(dev->wiphy, "eeprom reset timeout!\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int rtl8187_init_hw(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg;
-	int res;
-
-	/* reset */
-	rtl8187_set_anaparam(priv, true);
-
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-
-	msleep(200);
-	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
-	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
-	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
-	msleep(200);
-
-	res = rtl8187_cmd_reset(dev);
-	if (res)
-		return res;
-
-	rtl8187_set_anaparam(priv, true);
-
-	/* setup card */
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 1);
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-
-	rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
-	reg &= 0x3F;
-	reg |= 0x80;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
-	rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
-	rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0);
-
-	// TODO: set RESP_RATE and BRSR properly
-	rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
-
-	/* host_usb_init */
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
-	reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
-	rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
-	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20);
-	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
-	msleep(100);
-
-	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
-	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
-	msleep(100);
-
-	priv->rf->init(dev);
-
-	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
-	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
-	rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
-	rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
-	rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-
-	return 0;
-}
-
-static const u8 rtl8187b_reg_table[][3] = {
-	{0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0},
-	{0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0},
-	{0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0},
-	{0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0},
-
-	{0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
-	{0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
-	{0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1},
-	{0xF2, 0x02, 1}, {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1},
-	{0xF6, 0x06, 1}, {0xF7, 0x07, 1}, {0xF8, 0x08, 1},
-
-	{0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
-	{0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
-	{0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2},
-	{0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
-	{0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
-	{0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
-	{0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2},
-
-	{0x5B, 0x40, 0}, {0x84, 0x88, 0}, {0x85, 0x24, 0}, {0x88, 0x54, 0},
-	{0x8B, 0xB8, 0}, {0x8C, 0x07, 0}, {0x8D, 0x00, 0}, {0x94, 0x1B, 0},
-	{0x95, 0x12, 0}, {0x96, 0x00, 0}, {0x97, 0x06, 0}, {0x9D, 0x1A, 0},
-	{0x9F, 0x10, 0}, {0xB4, 0x22, 0}, {0xBE, 0x80, 0}, {0xDB, 0x00, 0},
-	{0xEE, 0x00, 0}, {0x4C, 0x00, 2},
-
-	{0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0},
-	{0x8F, 0x00, 0}
-};
-
-static int rtl8187b_init_hw(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int res, i;
-	u8 reg;
-
-	rtl8187_set_anaparam(priv, true);
-
-	/* Reset PLL sequence on 8187B. Realtek note: reduces power
-	 * consumption about 30 mA */
-	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
-	reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
-	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
-	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
-
-	res = rtl8187_cmd_reset(dev);
-	if (res)
-		return res;
-
-	rtl8187_set_anaparam(priv, true);
-
-	/* BRSR (Basic Rate Set Register) on 8187B looks to be the same as
-	 * RESP_RATE on 8187L in Realtek sources: each bit should be each
-	 * one of the 12 rates, all are enabled */
-	rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-	reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
-	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
-
-	/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFFE2, 0x00, 1);
-
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-
-	rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
-	for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) {
-		rtl818x_iowrite8_idx(priv,
-				     (u8 *)(uintptr_t)
-				     (rtl8187b_reg_table[i][0] | 0xFF00),
-				     rtl8187b_reg_table[i][1],
-				     rtl8187b_reg_table[i][2]);
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50);
-	rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0);
-
-	rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1);
-	rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1);
-
-	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
-
-	/* RFSW_CTRL register */
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
-
-	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
-	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
-	msleep(100);
-
-	priv->rf->init(dev);
-
-	reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
-
-	rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4);
-	rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
-	rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00);
-	rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01);
-
-	reg = rtl818x_ioread8(priv, (u8 *)0xFFDB);
-	rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2));
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3);
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3);
-	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1);
-	rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10);
-	rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2);
-
-	rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B);
-
-	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1);
-
-	priv->slot_time = 0x9;
-	priv->aifsn[0] = 2; /* AIFSN[AC_VO] */
-	priv->aifsn[1] = 2; /* AIFSN[AC_VI] */
-	priv->aifsn[2] = 7; /* AIFSN[AC_BK] */
-	priv->aifsn[3] = 3; /* AIFSN[AC_BE] */
-	rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0);
-
-	/* ENEDCA flag must always be set, transmit issues? */
-	rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA);
-
-	return 0;
-}
-
-static void rtl8187_work(struct work_struct *work)
-{
-	/* The RTL8187 returns the retry count through register 0xFFFA. In
-	 * addition, it appears to be a cumulative retry count, not the
-	 * value for the current TX packet. When multiple TX entries are
-	 * queued, the retry count will be valid for the last one in the queue.
-	 * The "error" should not matter for purposes of rate setting. */
-	struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
-				    work.work);
-	struct ieee80211_tx_info *info;
-	struct ieee80211_hw *dev = priv->dev;
-	static u16 retry;
-	u16 tmp;
-
-	mutex_lock(&priv->conf_mutex);
-	tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA);
-	while (skb_queue_len(&priv->b_tx_status.queue) > 0) {
-		struct sk_buff *old_skb;
-
-		old_skb = skb_dequeue(&priv->b_tx_status.queue);
-		info = IEEE80211_SKB_CB(old_skb);
-		info->status.rates[0].count = tmp - retry + 1;
-		ieee80211_tx_status_irqsafe(dev, old_skb);
-	}
-	retry = tmp;
-	mutex_unlock(&priv->conf_mutex);
-}
-
-static int rtl8187_start(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u32 reg;
-	int ret;
-
-	mutex_lock(&priv->conf_mutex);
-
-	ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
-				     rtl8187b_init_hw(dev);
-	if (ret)
-		goto rtl8187_start_exit;
-
-	init_usb_anchor(&priv->anchored);
-	priv->dev = dev;
-
-	if (priv->is_rtl8187b) {
-		reg = RTL818X_RX_CONF_MGMT |
-		      RTL818X_RX_CONF_DATA |
-		      RTL818X_RX_CONF_BROADCAST |
-		      RTL818X_RX_CONF_NICMAC |
-		      RTL818X_RX_CONF_BSSID |
-		      (7 << 13 /* RX FIFO threshold NONE */) |
-		      (7 << 10 /* MAX RX DMA */) |
-		      RTL818X_RX_CONF_RX_AUTORESETPHY |
-		      RTL818X_RX_CONF_ONLYERLPKT |
-		      RTL818X_RX_CONF_MULTICAST;
-		priv->rx_conf = reg;
-		rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
-
-		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
-		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
-		reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
-		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
-
-		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
-				  RTL818X_TX_CONF_HW_SEQNUM |
-				  RTL818X_TX_CONF_DISREQQSIZE |
-				  (7 << 8  /* short retry limit */) |
-				  (7 << 0  /* long retry limit */) |
-				  (7 << 21 /* MAX TX DMA */));
-		rtl8187_init_urbs(dev);
-		rtl8187b_init_status_urb(dev);
-		goto rtl8187_start_exit;
-	}
-
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
-
-	rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
-	rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
-
-	rtl8187_init_urbs(dev);
-
-	reg = RTL818X_RX_CONF_ONLYERLPKT |
-	      RTL818X_RX_CONF_RX_AUTORESETPHY |
-	      RTL818X_RX_CONF_BSSID |
-	      RTL818X_RX_CONF_MGMT |
-	      RTL818X_RX_CONF_DATA |
-	      (7 << 13 /* RX FIFO threshold NONE */) |
-	      (7 << 10 /* MAX RX DMA */) |
-	      RTL818X_RX_CONF_BROADCAST |
-	      RTL818X_RX_CONF_NICMAC;
-
-	priv->rx_conf = reg;
-	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
-	reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
-	reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
-	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
-	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
-	reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
-	rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
-
-	reg  = RTL818X_TX_CONF_CW_MIN |
-	       (7 << 21 /* MAX TX DMA */) |
-	       RTL818X_TX_CONF_NO_ICV;
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg |= RTL818X_CMD_TX_ENABLE;
-	reg |= RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-	INIT_DELAYED_WORK(&priv->work, rtl8187_work);
-
-rtl8187_start_exit:
-	mutex_unlock(&priv->conf_mutex);
-	return ret;
-}
-
-static void rtl8187_stop(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct sk_buff *skb;
-	u32 reg;
-
-	mutex_lock(&priv->conf_mutex);
-	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CMD);
-	reg &= ~RTL818X_CMD_TX_ENABLE;
-	reg &= ~RTL818X_CMD_RX_ENABLE;
-	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
-
-	priv->rf->stop(dev);
-	rtl8187_set_anaparam(priv, false);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
-		dev_kfree_skb_any(skb);
-
-	usb_kill_anchored_urbs(&priv->anchored);
-	mutex_unlock(&priv->conf_mutex);
-
-	if (!priv->is_rtl8187b)
-		cancel_delayed_work_sync(&priv->work);
-}
-
-static int rtl8187_add_interface(struct ieee80211_hw *dev,
-				 struct ieee80211_vif *vif)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int i;
-	int ret = -EOPNOTSUPP;
-
-	mutex_lock(&priv->conf_mutex);
-	if (priv->vif)
-		goto exit;
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-		break;
-	default:
-		goto exit;
-	}
-
-	ret = 0;
-	priv->vif = vif;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->MAC[i],
-				 ((u8 *)vif->addr)[i]);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-exit:
-	mutex_unlock(&priv->conf_mutex);
-	return ret;
-}
-
-static void rtl8187_remove_interface(struct ieee80211_hw *dev,
-				     struct ieee80211_vif *vif)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	mutex_lock(&priv->conf_mutex);
-	priv->vif = NULL;
-	mutex_unlock(&priv->conf_mutex);
-}
-
-static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	struct ieee80211_conf *conf = &dev->conf;
-	u32 reg;
-
-	mutex_lock(&priv->conf_mutex);
-	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-	/* Enable TX loopback on MAC level to avoid TX during channel
-	 * changes, as this has be seen to causes problems and the
-	 * card will stop work until next reset
-	 */
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF,
-			  reg | RTL818X_TX_CONF_LOOPBACK_MAC);
-	priv->rf->set_chan(dev, conf);
-	msleep(10);
-	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
-
-	rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
-	rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
-	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
-	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
-	mutex_unlock(&priv->conf_mutex);
-	return 0;
-}
-
-/*
- * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
- * example. Thus we have to use raw values for AC_*_PARAM register addresses.
- */
-static __le32 *rtl8187b_ac_addr[4] = {
-	(__le32 *) 0xFFF0, /* AC_VO */
-	(__le32 *) 0xFFF4, /* AC_VI */
-	(__le32 *) 0xFFFC, /* AC_BK */
-	(__le32 *) 0xFFF8, /* AC_BE */
-};
-
-#define SIFS_TIME 0xa
-
-static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot,
-			     bool use_short_preamble)
-{
-	if (priv->is_rtl8187b) {
-		u8 difs, eifs;
-		u16 ack_timeout;
-		int queue;
-
-		if (use_short_slot) {
-			priv->slot_time = 0x9;
-			difs = 0x1c;
-			eifs = 0x53;
-		} else {
-			priv->slot_time = 0x14;
-			difs = 0x32;
-			eifs = 0x5b;
-		}
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
-		rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time);
-		rtl818x_iowrite8(priv, &priv->map->DIFS, difs);
-
-		/*
-		 * BRSR+1 on 8187B is in fact EIFS register
-		 * Value in units of 4 us
-		 */
-		rtl818x_iowrite8(priv, (u8 *)&priv->map->BRSR + 1, eifs);
-
-		/*
-		 * For 8187B, CARRIER_SENSE_COUNTER is in fact ack timeout
-		 * register. In units of 4 us like eifs register
-		 * ack_timeout = ack duration + plcp + difs + preamble
-		 */
-		ack_timeout = 112 + 48 + difs;
-		if (use_short_preamble)
-			ack_timeout += 72;
-		else
-			ack_timeout += 144;
-		rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER,
-				 DIV_ROUND_UP(ack_timeout, 4));
-
-		for (queue = 0; queue < 4; queue++)
-			rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue],
-					 priv->aifsn[queue] * priv->slot_time +
-					 SIFS_TIME);
-	} else {
-		rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
-		if (use_short_slot) {
-			rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
-			rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
-			rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
-		} else {
-			rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
-			rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
-			rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
-		}
-	}
-}
-
-static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *info,
-				     u32 changed)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	int i;
-	u8 reg;
-
-	if (changed & BSS_CHANGED_BSSID) {
-		mutex_lock(&priv->conf_mutex);
-		for (i = 0; i < ETH_ALEN; i++)
-			rtl818x_iowrite8(priv, &priv->map->BSSID[i],
-					 info->bssid[i]);
-
-		if (priv->is_rtl8187b)
-			reg = RTL818X_MSR_ENEDCA;
-		else
-			reg = 0;
-
-		if (is_valid_ether_addr(info->bssid))
-			reg |= RTL818X_MSR_INFRA;
-		else
-			reg |= RTL818X_MSR_NO_LINK;
-
-		rtl818x_iowrite8(priv, &priv->map->MSR, reg);
-
-		mutex_unlock(&priv->conf_mutex);
-	}
-
-	if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
-		rtl8187_conf_erp(priv, info->use_short_slot,
-				 info->use_short_preamble);
-}
-
-static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
-				     struct netdev_hw_addr_list *mc_list)
-{
-	return netdev_hw_addr_list_count(mc_list);
-}
-
-static void rtl8187_configure_filter(struct ieee80211_hw *dev,
-				     unsigned int changed_flags,
-				     unsigned int *total_flags,
-				     u64 multicast)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	if (changed_flags & FIF_FCSFAIL)
-		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
-	if (changed_flags & FIF_CONTROL)
-		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
-	if (changed_flags & FIF_OTHER_BSS)
-		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
-	if (*total_flags & FIF_ALLMULTI || multicast > 0)
-		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
-	else
-		priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
-
-	*total_flags = 0;
-
-	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
-		*total_flags |= FIF_FCSFAIL;
-	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
-		*total_flags |= FIF_CONTROL;
-	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
-		*total_flags |= FIF_OTHER_BSS;
-	if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
-		*total_flags |= FIF_ALLMULTI;
-
-	rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
-}
-
-static int rtl8187_conf_tx(struct ieee80211_hw *dev, u16 queue,
-			   const struct ieee80211_tx_queue_params *params)
-{
-	struct rtl8187_priv *priv = dev->priv;
-	u8 cw_min, cw_max;
-
-	if (queue > 3)
-		return -EINVAL;
-
-	cw_min = fls(params->cw_min);
-	cw_max = fls(params->cw_max);
-
-	if (priv->is_rtl8187b) {
-		priv->aifsn[queue] = params->aifs;
-
-		/*
-		 * This is the structure of AC_*_PARAM registers in 8187B:
-		 * - TXOP limit field, bit offset = 16
-		 * - ECWmax, bit offset = 12
-		 * - ECWmin, bit offset = 8
-		 * - AIFS, bit offset = 0
-		 */
-		rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue],
-				  (params->txop << 16) | (cw_max << 12) |
-				  (cw_min << 8) | (params->aifs *
-				  priv->slot_time + SIFS_TIME));
-	} else {
-		if (queue != 0)
-			return -EINVAL;
-
-		rtl818x_iowrite8(priv, &priv->map->CW_VAL,
-				 cw_min | (cw_max << 4));
-	}
-	return 0;
-}
-
-static u64 rtl8187_get_tsf(struct ieee80211_hw *dev)
-{
-	struct rtl8187_priv *priv = dev->priv;
-
-	return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
-	       (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
-}
-
-static const struct ieee80211_ops rtl8187_ops = {
-	.tx			= rtl8187_tx,
-	.start			= rtl8187_start,
-	.stop			= rtl8187_stop,
-	.add_interface		= rtl8187_add_interface,
-	.remove_interface	= rtl8187_remove_interface,
-	.config			= rtl8187_config,
-	.bss_info_changed	= rtl8187_bss_info_changed,
-	.prepare_multicast	= rtl8187_prepare_multicast,
-	.configure_filter	= rtl8187_configure_filter,
-	.conf_tx		= rtl8187_conf_tx,
-	.rfkill_poll		= rtl8187_rfkill_poll,
-	.get_tsf		= rtl8187_get_tsf,
-};
-
-static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-{
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
-
-	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
-	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
-	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
-	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
-}
-
-static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
-{
-	struct ieee80211_hw *dev = eeprom->data;
-	struct rtl8187_priv *priv = dev->priv;
-	u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
-
-	if (eeprom->reg_data_in)
-		reg |= RTL818X_EEPROM_CMD_WRITE;
-	if (eeprom->reg_data_out)
-		reg |= RTL818X_EEPROM_CMD_READ;
-	if (eeprom->reg_data_clock)
-		reg |= RTL818X_EEPROM_CMD_CK;
-	if (eeprom->reg_chip_select)
-		reg |= RTL818X_EEPROM_CMD_CS;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
-	udelay(10);
-}
-
-static int __devinit rtl8187_probe(struct usb_interface *intf,
-				   const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct ieee80211_hw *dev;
-	struct rtl8187_priv *priv;
-	struct eeprom_93cx6 eeprom;
-	struct ieee80211_channel *channel;
-	const char *chip_name;
-	u16 txpwr, reg;
-	u16 product_id = le16_to_cpu(udev->descriptor.idProduct);
-	int err, i;
-	u8 mac_addr[ETH_ALEN];
-
-	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
-	if (!dev) {
-		printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
-		return -ENOMEM;
-	}
-
-	priv = dev->priv;
-	priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
-
-	/* allocate "DMA aware" buffer for register accesses */
-	priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
-	if (!priv->io_dmabuf) {
-		err = -ENOMEM;
-		goto err_free_dev;
-	}
-	mutex_init(&priv->io_mutex);
-
-	SET_IEEE80211_DEV(dev, &intf->dev);
-	usb_set_intfdata(intf, dev);
-	priv->udev = udev;
-
-	usb_get_dev(udev);
-
-	skb_queue_head_init(&priv->rx_queue);
-
-	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
-	BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
-
-	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
-	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
-	priv->map = (struct rtl818x_csr *)0xFF00;
-
-	priv->band.band = IEEE80211_BAND_2GHZ;
-	priv->band.channels = priv->channels;
-	priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
-	priv->band.bitrates = priv->rates;
-	priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
-	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
-
-
-	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		     IEEE80211_HW_SIGNAL_DBM |
-		     IEEE80211_HW_RX_INCLUDES_FCS;
-
-	eeprom.data = dev;
-	eeprom.register_read = rtl8187_eeprom_register_read;
-	eeprom.register_write = rtl8187_eeprom_register_write;
-	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
-		eeprom.width = PCI_EEPROM_WIDTH_93C66;
-	else
-		eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	udelay(10);
-
-	eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
-			       (__le16 __force *)mac_addr, 3);
-	if (!is_valid_ether_addr(mac_addr)) {
-		printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
-		       "generated MAC address\n");
-		random_ether_addr(mac_addr);
-	}
-	SET_IEEE80211_PERM_ADDR(dev, mac_addr);
-
-	channel = priv->channels;
-	for (i = 0; i < 3; i++) {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
-				  &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-		(*channel++).hw_value = txpwr >> 8;
-	}
-	for (i = 0; i < 2; i++) {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
-				  &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-		(*channel++).hw_value = txpwr >> 8;
-	}
-
-	eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
-			  &priv->txpwr_base);
-
-	reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1;
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1);
-	/* 0 means asic B-cut, we should use SW 3 wire
-	 * bit-by-bit banging for radio. 1 means we can use
-	 * USB specific request to write radio registers */
-	priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
-	rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
-
-	if (!priv->is_rtl8187b) {
-		u32 reg32;
-		reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-		reg32 &= RTL818X_TX_CONF_HWVER_MASK;
-		switch (reg32) {
-		case RTL818X_TX_CONF_R8187vD_B:
-			/* Some RTL8187B devices have a USB ID of 0x8187
-			 * detect them here */
-			chip_name = "RTL8187BvB(early)";
-			priv->is_rtl8187b = 1;
-			priv->hw_rev = RTL8187BvB;
-			break;
-		case RTL818X_TX_CONF_R8187vD:
-			chip_name = "RTL8187vD";
-			break;
-		default:
-			chip_name = "RTL8187vB (default)";
-		}
-       } else {
-		/*
-		 * Force USB request to write radio registers for 8187B, Realtek
-		 * only uses it in their sources
-		 */
-		/*if (priv->asic_rev == 0) {
-			printk(KERN_WARNING "rtl8187: Forcing use of USB "
-			       "requests to write to radio registers\n");
-			priv->asic_rev = 1;
-		}*/
-		switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
-		case RTL818X_R8187B_B:
-			chip_name = "RTL8187BvB";
-			priv->hw_rev = RTL8187BvB;
-			break;
-		case RTL818X_R8187B_D:
-			chip_name = "RTL8187BvD";
-			priv->hw_rev = RTL8187BvD;
-			break;
-		case RTL818X_R8187B_E:
-			chip_name = "RTL8187BvE";
-			priv->hw_rev = RTL8187BvE;
-			break;
-		default:
-			chip_name = "RTL8187BvB (default)";
-			priv->hw_rev = RTL8187BvB;
-		}
-	}
-
-	if (!priv->is_rtl8187b) {
-		for (i = 0; i < 2; i++) {
-			eeprom_93cx6_read(&eeprom,
-					  RTL8187_EEPROM_TXPWR_CHAN_6 + i,
-					  &txpwr);
-			(*channel++).hw_value = txpwr & 0xFF;
-			(*channel++).hw_value = txpwr >> 8;
-		}
-	} else {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
-				  &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-
-		eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-
-		eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
-		(*channel++).hw_value = txpwr & 0xFF;
-		(*channel++).hw_value = txpwr >> 8;
-	}
-	/* Handle the differing rfkill GPIO bit in different models */
-	priv->rfkill_mask = RFKILL_MASK_8187_89_97;
-	if (product_id == 0x8197 || product_id == 0x8198) {
-		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_SELECT_GPIO, &reg);
-		if (reg & 0xFF00)
-			priv->rfkill_mask = RFKILL_MASK_8198;
-	}
-
-	/*
-	 * XXX: Once this driver supports anything that requires
-	 *	beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
-	 */
-	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
-
-	if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
-		printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
-		       " info!\n");
-
-	priv->rf = rtl8187_detect_rf(dev);
-	dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
-				  sizeof(struct rtl8187_tx_hdr) :
-				  sizeof(struct rtl8187b_tx_hdr);
-	if (!priv->is_rtl8187b)
-		dev->queues = 1;
-	else
-		dev->queues = 4;
-
-	err = ieee80211_register_hw(dev);
-	if (err) {
-		printk(KERN_ERR "rtl8187: Cannot register device\n");
-		goto err_free_dmabuf;
-	}
-	mutex_init(&priv->conf_mutex);
-	skb_queue_head_init(&priv->b_tx_status.queue);
-
-	wiphy_info(dev->wiphy, "hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
-		   mac_addr, chip_name, priv->asic_rev, priv->rf->name,
-		   priv->rfkill_mask);
-
-#ifdef CONFIG_RTL8187_LEDS
-	eeprom_93cx6_read(&eeprom, 0x3F, &reg);
-	reg &= 0xFF;
-	rtl8187_leds_init(dev, reg);
-#endif
-	rtl8187_rfkill_init(dev);
-
-	return 0;
-
- err_free_dmabuf:
-	kfree(priv->io_dmabuf);
- err_free_dev:
-	ieee80211_free_hw(dev);
-	usb_set_intfdata(intf, NULL);
-	usb_put_dev(udev);
-	return err;
-}
-
-static void __devexit rtl8187_disconnect(struct usb_interface *intf)
-{
-	struct ieee80211_hw *dev = usb_get_intfdata(intf);
-	struct rtl8187_priv *priv;
-
-	if (!dev)
-		return;
-
-#ifdef CONFIG_RTL8187_LEDS
-	rtl8187_leds_exit(dev);
-#endif
-	rtl8187_rfkill_exit(dev);
-	ieee80211_unregister_hw(dev);
-
-	priv = dev->priv;
-	usb_reset_device(priv->udev);
-	usb_put_dev(interface_to_usbdev(intf));
-	kfree(priv->io_dmabuf);
-	ieee80211_free_hw(dev);
-}
-
-static struct usb_driver rtl8187_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= rtl8187_table,
-	.probe		= rtl8187_probe,
-	.disconnect	= __devexit_p(rtl8187_disconnect),
-};
-
-static int __init rtl8187_init(void)
-{
-	return usb_register(&rtl8187_driver);
-}
-
-static void __exit rtl8187_exit(void)
-{
-	usb_deregister(&rtl8187_driver);
-}
-
-module_init(rtl8187_init);
-module_exit(rtl8187_exit);