Merge tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards

Board specific changes for omap.

Note that these are based on omap-pm-regulator-for-v3.5 as
both branches are adding twl regulators.

By Paul Gortmaker (8) and others
via Linus Torvalds (38) and others
* tag 'omap-board-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies
  OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies
  OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration
  ARM: OMAP: Mark Beagleboard-xM MMC bus as 4-bit
  Add MSUB support for the LogicPD OMAP3530 DevKits
  ARM: OMAP: rx51: Platform support for lis3lv02d accelerometer
  ARM: OMAP2+: craneboard: register emac device
  ARM: OMAP4: board-omap4panda: Register platform device for HDMI audio codec
  ARM: OMAP4: board-4430sdp: Register platform device for HDMI audio codec
  ARM: OMAP: devices: Register platform devices for HDMI audio
  ARM: OMAP3: igep0020: Add support for Micron NAND Flash storage memory
  ARM: OMAP2+: nand: Make board_onenand_init() visible to board code
  ARM: OMAP3: cm-t35: add support for power off
  ARM: OMAP: WiLink platform data for the PandaBoard
  ARM: OMAP2PLUS: Enable HIGHMEM
  ARM: OMAP: omap2plus_defconfig: Enable ehci-omap and sms95xx support

Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 13 insertions, 12 deletions

diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index c722aa607d07..f8dda009d3c0 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -889,16 +889,17 @@ static int ks8851_net_stop(struct net_device *dev)
 	netif_stop_queue(dev);
 
 	mutex_lock(&ks->lock);
+	/* turn off the IRQs and ack any outstanding */
+	ks8851_wrreg16(ks, KS_IER, 0x0000);
+	ks8851_wrreg16(ks, KS_ISR, 0xffff);
+	mutex_unlock(&ks->lock);
 
 	/* stop any outstanding work */
 	flush_work(&ks->irq_work);
 	flush_work(&ks->tx_work);
 	flush_work(&ks->rxctrl_work);
 
-	/* turn off the IRQs and ack any outstanding */
-	ks8851_wrreg16(ks, KS_IER, 0x0000);
-	ks8851_wrreg16(ks, KS_ISR, 0xffff);
-
+	mutex_lock(&ks->lock);
 	/* shutdown RX process */
 	ks8851_wrreg16(ks, KS_RXCR1, 0x0000);
 
@@ -907,6 +908,7 @@ static int ks8851_net_stop(struct net_device *dev)
 
 	/* set powermode to soft power down to save power */
 	ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN);
+	mutex_unlock(&ks->lock);
 
 	/* ensure any queued tx buffers are dumped */
 	while (!skb_queue_empty(&ks->txq)) {
@@ -918,7 +920,6 @@ static int ks8851_net_stop(struct net_device *dev)
 		dev_kfree_skb(txb);
 	}
 
-	mutex_unlock(&ks->lock);
 	return 0;
 }
 
@@ -1418,6 +1419,7 @@ static int __devinit ks8851_probe(struct spi_device *spi)
 	struct net_device *ndev;
 	struct ks8851_net *ks;
 	int ret;
+	unsigned cider;
 
 	ndev = alloc_etherdev(sizeof(struct ks8851_net));
 	if (!ndev)
@@ -1484,8 +1486,8 @@ static int __devinit ks8851_probe(struct spi_device *spi)
 	ks8851_soft_reset(ks, GRR_GSR);
 
 	/* simple check for a valid chip being connected to the bus */
-
-	if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+	cider = ks8851_rdreg16(ks, KS_CIDER);
+	if ((cider & ~CIDER_REV_MASK) != CIDER_ID) {
 		dev_err(&spi->dev, "failed to read device ID\n");
 		ret = -ENODEV;
 		goto err_id;
@@ -1516,15 +1518,14 @@ static int __devinit ks8851_probe(struct spi_device *spi)
 	}
 
 	netdev_info(ndev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n",
-		    CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
-		    ndev->dev_addr, ndev->irq,
+		    CIDER_REV_GET(cider), ndev->dev_addr, ndev->irq,
 		    ks->rc_ccr & CCR_EEPROM ? "has" : "no");
 
 	return 0;
 
 
 err_netdev:
-	free_irq(ndev->irq, ndev);
+	free_irq(ndev->irq, ks);
 
 err_id:
 err_irq:
diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index b8104d9f4081..5ffde23ac8fb 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -40,7 +40,7 @@
 #define	DRV_NAME	"ks8851_mll"
 
 static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 };
-#define MAX_RECV_FRAMES			32
+#define MAX_RECV_FRAMES			255
 #define MAX_BUF_SIZE			2048
 #define TX_BUF_SIZE			2000
 #define RX_BUF_SIZE			2000
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index ef723b185d85..eaf9ff0262a9 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -5675,7 +5675,7 @@ static int netdev_set_mac_address(struct net_device *dev, void *addr)
 		memcpy(hw->override_addr, mac->sa_data, ETH_ALEN);
 	}
 
-	memcpy(dev->dev_addr, mac->sa_data, MAX_ADDR_LEN);
+	memcpy(dev->dev_addr, mac->sa_data, ETH_ALEN);
 
 	interrupt = hw_block_intr(hw);